Thermo Scientific Konelab 20XT and Konelab 20

2

Fully automated Konelab systems

Compact and proven analyzers

Easy and cost-efficient to use

Konelab 20:

• Capacity up to 200 tests/hour

• For routine clinical chemistry testing

Konelab 20XT:

• Capacity up to 250 tests/hour

• For routine and esoteric clinical chemistry testing

3

Product overview

Konelab 20 Konelab 20XT

Capacity up to 200 tests/hr up to 250 tests/hr

ISE option Na+, K+, Cl-, Li+ Na+, K+, Cl-, Li+

TDM/DAT No Yes

Sample positions Up to 84 on-board, 5 STAT samples

Up to 84 on-board, 5 STAT samples

Reagent positions 35 cooled 35 cooled

Cuvette storage positions

600 600

Mixing Needle mixing Separate mixing paddle

Continuous access to samples, reagents and cuvettes

4

Wide test range - with user-defined application flexibility

• CE marked, bar coded system reagents • Enzymes and substrates• Electrolytes• Specific Proteins • Drugs of Abuse Tests in the model 20XT• Therapeutic Drug Monitoring in the model 20XT

• Over 80 carefully validated methods according to IFCC and other widely used recommendations

• Can easily be complemented by user definable applications• Special applications to be validated by the customer or distributor

5

Flexible, automated operation

• Possibility for up to 4 reagent additions per test

• Automated sample pretreatment feature

• Versatile dilution features• Pre-dilution possibility• Post-dilution with both high and low secondary dilution ratios• Calibrator set made automatically from one stock calibrator for most

specific proteins

• Different sample types can be analysed at the same time

• Important in drug monitoring and therapeutic control

• Reflex testing• Saves time and money when finding out

the specific test to be run

6

Productive, accurate analysis

• User-safe and contamination free measurement

• Proven, unique, single use 12-cell cuvette

• Cost-effective due to low reaction volume

• Only 100 to 250 l

• Typically 120 - 200 l

• Flexibility and long walk-away time• Cuvette storage enables up to 2.5 hours

walk-away time

• Continuous loading access without interrupting testing

7

Bright graphical user-interface

• Advanced fully graphical user-interface • Provides fast guidance

• Makes the analyser easy to use

• Available in more than 20 language versions

• Back-up possibilities• On hard disk

• On CD/ USB

8

Safe sample handling

• Error free sample handling • Automatic sample identification,

direct barcode reading and cup/ tube recognition

• Bidirectional LIS interface for quick data transfer

• Continuous sample loading

• Sample tubes• 5, 7 and 10 ml tubes

• 0.5 and 2 ml sample cups

9

Sample disk

• 84 samples, calibrators and controls on board

• 6 segments, 14 pos. in each segment

• 5 dedicated urgent (STAT) positions

• Possibility to load also into segments

10

Automated sample pretreatment

• Saves the operator time, e.g. by automating hemolyzation in HbA1c measurement

• Improves quality by minimizing operator variation

• Dedicated sample segment for whole blood samples• For one segment hemolyzation takes about 10 min,

total turnaround time about 30 min

11

Convenient reagent handling

• Reagents can be added at any time

• Continuous monitoring possibility• Flagging of expired reagents

• Determination of vial volume

• Estimation of reagent sufficiency

• Automatic bottle change-over increases the walk-away time• Possibility to run QC with every new bottle

• Used reagent lots can be archived

12

Reagent disk

• 35 vial positions

• External barcode reader

• Cooled disk

13

Simultaneous electrolyte measurement

• Direct measurement method used in Konelab • Generally considered the most accurate ISE method

• Serum, plasma and urine samples• Direct or by manually pre-diluted urine sample

• Micro volume electrodes for even smaller sample volumes• Sample volume of only 50 l is sufficient for Na+, K+ and Cl-

• Additionally 6 l if Li+ is required

• Maintenance-free electrodes

• Delivered ready-to-use

14

Minimal maintenance - no water supply or drainage requirements

• Daily – 5 min• Fill distilled water, empty waste water container• Empty cuvette waste compartment• Perform Start up and Stand by procedures• Check the bag of ISE Calibrator solution 1

• 6 months maintenance• Change diluent/ wash tubes• Change the lamp

• 12 months maintenance• Change the syringe• Change the dispensing needle• Change the mixing paddle in 20XT• Change drain/ waste tubes

15

Technical and application expertise all the way

• Konelab analyzers are supported with

• Customized installation

• Product training

• Product & Application support

• After-sales support

• Maintenance contracts

• Technical service

16

Fulfilling requirements

• Quality system is certified according to the ISO 9001:2000 standard extended with the EN ISO 13485:2003

• Konelab systems are compliant with the requirements of the In Vitro Diagnostic Medical Device Directive (IVDMDD)

17

Key benefits of Konelab analyzers

• Easy to use• Clearly laid out, simple to navigate user interface

• Automation and analyst efficiency• Once loaded, the analyzer will run without

the assistance of the analyst • Automatic dilution of an over range sample• Automated sample pretreatment feature• Reflex test possibility

• Different types of samples can be analysed at the same time• Important in drug monitoring and therapeutic control

• User-safe and contamination free analysis• Disposable cuvettes

• Productivity• Low reagent volumes -> low cost per test, important in expensive tests• Quick daily start up• Minimal maintenance

18

Key benefits of Konelab analyzers

• Carefully selected methods and applications• Over 150 CE-marked reagents• Optimized kits serve different-sized laboratories• Ready for use, stable liquids• System-specific multi-calibrators and controls

• Flexible software • Easy method set-up• Special applications to be validated by

the customer or distributor

• Direct electrolyte measurement• The most accurate ISE method• Maintenance-free electrodes

delivered ready-to-use

• Full application and technical support

19

One reagent line to be used in all Konelab analyzers

Albumin ACPTotal and Direct Bilirubin ALPCarbon Dioxide

ALT/GPTCalcium AST/GOTCholesterol AmylaseHDL and LDL Cholesterol CholinesteraseCreatinine DibucaineGlucose CKIron CK-

MBMagnesium Gamma-GTPhosphorus -HBDHTotal Protein LDHTriglycerides LipaseU/CSF ProteinUreaUric Acid Na, K, Cl

Ca, pH

Albumin

Antistreptolysin O

-1-Antitrypsin

Apolipoprotein A1 and B

Ceruloplasmin

Complement C3 and C4

C-reactive protein

Cystatin C

High Sensitive CRP

HbA1c

Haptoglobin

IgA, G and M

Lipoprotein (a)

Microalbuminuria

Myoglobin

Orosomucoid

Prealbumin

Rheumatoid factors

Transferrin

Amphetamine

Barbiturates

Benzodiazepines

Cannabinoids

Cocaine Metabolite

Opiates

Cotinine

Ethyl Alcohol

Methadone

Propoxyphene

Carbamazepine

Phenobarbital

Phenytoin

Theophylline

Valproic Acid

Lithium

Su

bstrates

En

zymes

Sp

ecific Pro

teins

Do

A (D

AT

)T

DM

Electro

lytes

20

Konelab 20XT and Konelab 20

For convenient and precise clinical chemistry analysis!