Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Thermo Plastic Pressure Pipe SystemsProduct Range and Technical Installation Guide
Catalogo Tecnico e Guida all’Installazione
3
Product Guide / Guida ai Prodotti
Effast from Polypipe Italia is a well-established brand name that is recognised throughout both the industrial process market and construction industries for its market-leading range of thermoplastic pipework systems suitable for use within industrial applications. The company now provides these components to customers all over the world and leads the way in the research and development of advanced new solutions that satisfy the specific needs of the market.
Polypipe, with its large UK based manufacturing capabilities, has developed Effast’s comprehensive product portfolio such that it now offers a proven and effective solution to virtually any requirement. No matter what the project, the Effast range can offer the perfect combination of pressure pipe fittings, ball, butterfly, diaphragm and actuated valves, compression joints, adaptors and other fittings. Normally available in both metric and imperial dimensions these products are suited to many different commercial applications in such areas as food and beverage processing, chemical manufacture, water treatment and agriculture.
Outstanding performance and reliability have come to represent the hallmarks by which Polypipe’s Effast products are recognised and with these products also carrying BSI Kitemark accreditation and conforming to various other European standards they can be specified with complete confidence.
Dedicated to supporting its customers at every stage the company also complements its products and systems with a full technical information and support service, while a nationwide distribution network means that products are readily available, even when needed next day.
For further information please see our contact details on the back cover of this brochure.
Il marchio EFFAST è presente da molti anni sul mercato ed è molto apprezzato e riconosciuto sia per le applicazioni di tipo industriale sia per le applicazioni proprie del campo delle costruzioni civili e dell’agricoltura.
I raccordi e le valvole a marchio EFFAST sono prodotti in Italia e sono commercializzati nel mondo avendo come riferimento la soddisfazione dei Clienti, se necessario anche attraverso la ricerca e lo sviluppo di soluzioni personalizzate.
Il Gruppo Polypipe, forte di una consolidata esperienza di produttore industriale su larga scala, ha costantemente investito nella propria consociata Polypipe Italia così da farla diventare un’azienda virtuosa, capace di offrire una soluzione valida per ogni tipo di problematica. In effetti, qualunque progetto o applicazione riferita a circuiti in pressione trova nella gamma EFFAST una perfetta combinazione di raccordi, valvole a sfera, valvole a farfalla, valvole a membrana, valvole motorizzate, giunti rapidi, adattatori ed altro ancora. Tutti i prodotti a marchio EFFAST sono disponibili sia nelle misure metriche che in quelle “British Standard” caratteristiche dei mercati di matrice anglosassone e sono adatti per essere utilizzati nei processi dell’industria alimentare così come in quelli dell’industria chimica, del trattamento acque e dell’irrigazione.
Il prodotti EFFAST sono associati ai principali marchi di qualità (BSI, Kiwa, NF, IIP, DFGW, WRAS) e la Polypipe Italia è un’azienda certificata ISO 9001 (certificazione di sistema) ed ISO 14000 (certificazione ambientale); la Qualità caratterizza quindi i prodotti di un’azienda che vuole offrire ai propri Clienti la massima affidabilità e la migliore rispondenza alle specifiche di progetto.
La missione della Polypipe Italia si completa offrendo un costante sostegno ai propri Clienti nell’offrire loro tutte le necessarie informazioni di natura tecnica e garantendo altresì un servizio capace di evadere gli ordini in tempi brevissimi.
Per ogni ulteriore informazione si rimanda al dettaglio dei nostri contatti nell’ultima pagina di questo Catalogo.
UNI EN ISO 9001:2008UNI EN ISO 14001:2004
NF 055; NF EN 1452;NF T 54-029
BS 5392-1:2006
Certificate no 1111094 (PVC)Certificate no 1111095 (ABS)
C - IT. 04.B.00412
UNI EN ISO 1452-3:2010No iscrizione 295
BS EN 1452-3:2000 (PVC)BS 5392-1:2006
BRL-K 17301
Produkt gemäß das Arbeitsblatt DVGW W720 und die Richtlinien UBA (KTW) getestet
BUREAUVERITAS
Certificate N° 37693/A0 BV
4
Effast Product Code Guide / Guida alla lettura del codice 5
Material and Applications / Materiali e applicazioni 6 / 7
PVCu / PVCu 8
PVCu Introduction / PVCu introduzione 9 / 13
PVCu Pipe / PVCu Tubo 14 / 15
PVCu Metric Plain Fittings / PVCu Raccordi a incollaggio Metrici 16 / 24
PVCu Metric Adaptor Fittings / PVCu Raccordi Metrici di passaggio 25 / 29
PVCu Imperial Pipe Fittings / PVCu Raccordi BS 30 / 33
PVCu Imperial Adaptor Fittings / PVCu Raccordi BS di passaggio 33 / 36
PVCu Threaded Fittings / PVCu Raccordi filettati 37 / 42
Flowmeters / Flussometri 43
PVCu Valve Introduction / PVCu Valvole Introduzione 44 / 51
PVCu Actuated Valves / Valvole con Attuatore Introduzione 52 / 58
PVCu Industrial Ball Valves / PVCu Valvole Serie “Industria” 59 / 62
PVCu Economy Ball Valves / PVCu Valvole Serie “Acqua” 63 / 65
PVCu Check Valves / PVCu Valvole di Non Ritorno 66 / 67
PVCu Air Release Valves / PVCu Valvole Sfogo Aria 67
PVCu Foot Valves / PVCu Valvole di Fondo 68
PVCu Swing Check Valves/ PVCu Valvole a Clapet 69
PVCu 3 Way Ball Valves / PVCu Valvola a Sfera 3 vie 69 / 70
PVCu Butterfly Valves / Valvole a Farfalla 70 / 71
Actuated Valves / PVCu Valvole con Attuatore 72 / 74
PVCu Diaphragm Valves / PVCu Valvole a Membrana 74 / 75
ABS / ABS 76
ABS Introduction / ABS Introduzione 77 / 79
ABS Pipes / ABS Tubo 80
ABS Plain Fittings / ABS Raccordi Incollaggio 81 / 84
ABS BSP Fittings / ABS Raccordi di Passaggio 85 / 87
ABS Valves / ABS Valvole 88 / 89
Red ABS / ABS Rosso 90
Red ABS Pipe and Fittings / ABS Rosso Tubo e Raccordi 91
Polypropylene / Polipropilene 92
PP Introduction / PP Introduzione 93 / 96
PP Plain Fittings / PP Raccordi a Fusione 97 / 98
PP Threaded Fittings / PP Raccordi Filettati 99 / 100
PP Valves / PP Valvole 101 / 102
PP Pressure Pipes / PP Tubo a Pressione 102
Accessories / Accessori 103
PTFE Tape / Teflon Nastro 103
Glue / Colla 103
Cleaner / Detergente 103
Pipe Hanger Spacing / Supporti per Tubi 104
Pipe Brackets / Staffe per Tubo 105
PVC and ABS Valve Spares / Ricambi per Valvole PVC e ABS 105 / 106
Technical Information / Informazioni Tecniche 107
Materials Selection / Tipi di Materiale 107 / 112
Storage, Handling and Installation / Stoccaggio, Movimentazione e Installazione 113 / 119
Methods of Jointing / Metodi di Giunzione 120 / 123
Pipe and Fittings Dimensions / Raccordi e Tubi – Dimensioni 124 / 126
Chemical Resistence / Tabella di Compatibilità Chimica 127 / 133
Engineering and Flange Data Tables / Specifiche Tecniche 134
Contents / Indice
5
Effast product code guide / Guida al codice prodotto
40 60
30
30 40
30
3040 15
BOX TYPES = small 40 x 30 x 15 cm
M = medium 40 x 30 x 30 cm
L = large 60 x 40 x 30 cm
S = small 0.5 kg
M = medium 0.6 kg
L = large 1.0 kg
EUROPALLET24 box large
48 box medium
96 box small
Packing in boxes
ConnectionA = BS
B = BS-MM
C = BS-BSP
D = MM
E = BSP
G = MM / BSP
H = Socket Fusion
N = FIL. NPT
Q = BSP M/F
Size:Last letter show trhead o second Diameter(0 final = INC / Letter = FIL)
A = 16 - 3/8
B = 20 - 1/2
C = 25 - 3/4
D = 32 - 1”
E = 40 - 11/4
F = 50 - 11/2
G = 63 - 2
H = 75 - 21/2
I = 90 - 3”
L = 110 - 4”
M = 125 - 5”
N = 140
O = 160 - 6
P = 180
Q = 200
R = 225 - 8”
S = 250
T = 280 - 10”
U = 315 - 12”
V = 355
Actuated ValveEBK/electric
EFV/electric
PBK/pneumatic
PFV/pneumatic
Figure
G 025 C
CategoryR = Fitting
F = Butterfly Valve
G = Fitting
H = Flowmeter
B = Ball Valves
C = Check Valves
S = Clip
T = Pipe
R G
MaterialA = ABS
R = PVC
G = Fitting
P = PP
S = AQUA Range
R GO
Contents / Indice
6
PVCu Typical ApplicationsMost Widely Used Plastic Material Industrial Process SystemsLarge Choice of Fittings Water Treatment and Chemical DosingExcellent Chemical Resistance Food & Beverage Rigid Construction Swimming Pools and Spas
Cold Water SupplyABSWide Temperature Range Chilled WaterHigh Impact Strength Boosted Cold WaterAbrasion Resistance Plant RoomsNon Toxic Chemical & Pharmaceutical
PolypropyleneHigh Impact Strength Chemical Process SystemsGood Thermal and Electrical Insulator Metal FinishingExcellent Chemical Resistance Chemical DosingHigh Temperatures (<110°C)
Applications Guide ABS PVCu PP-H
Acids and Alkalis ✓ ✓ ✓A/C and Refrigeration ✓Biotechnology ✓ ✓ ✓Boosted Cold Water ✓Condensate ✓Chemical Dosing ✓ ✓ ✓Chemical Drainage ✓Chilled Water ✓Compressed Air
De-Mineralised Water ✓ ✓ ✓
Applications Guide ABS PVCu PP-H
Effluent Treatment ✓ ✓Electro Plating ✓ ✓ ✓Film Processing ✓ ✓ ✓Food Processing & Beverages ✓ Gas ✓Glycol Systems ✓Hot Cold Water ✓ ✓Hot Corrosive Materials ✓Hot Water ✓Irrigation ✓ ✓
Applications Guide ABS PVCu PP-H
Marine / Brine ✓Pharmaceutical ✓ ✓ ✓Potable Water ✓ ✓Pulp and Paper ✓ ✓Semi Conductor ✓ ✓ ✓Slurries ✓Sprinklers
Swimming Pools ✓ ✓Water& Sewage Treatments ✓ ✓ ✓Water Industry ✓ ✓
All Effast materials are suitable for a number of applications. The table below details common applications and the appropriate Effast materials for that situation
Materials Product Range Size Range Certifications/Norms ApplicationsPVC UH
Solvent cement metric british standard fitting 16mm to 315mm3/8” to 8”
IIP No099/2005NF No 63-1P-01KIWA 21166/01
Swimming pools - spasUnplastifiedHigh DensityPolyvinyl Chloride Adaptor Fittings BS/Metric 1/2” to 4” EN1452
Threaded fittings mix solvent cement + threaded 16mm to 110mm3/8” to 4” WRAS-BSI KITE MARK 60041 Agriculture-Irrigation - Foodstuff Industry
Metric/BS/BSP Threaded ball & check valves 16mm to 110mm1/2” to 4”
Metric fittings in accordance to ISO 727 - DIN 8063 - EN1452-4 Building Industry low temperature H&C
Butterfly valves DN 65 to DN 300(63mm to 315mm) NFT 54/028 EN1452-4 Water treatment - potable water
supply - effluents
Electrical & pneumatical ball valves 20mm to 110mm BS fittings in accordance to BS4346/1 EN1452-4 Chemical processing (-10oc + 60oc)
Electrical & pneumatical butterfly valves 63mm to 315mm EN1452-4ABS Solvent cement british standard fittings 1/2” to 8” WRAS - BSI KITE MARK 60042 Food & beverage, water & sewerage
treatmentAcrylonitriteBuladiene Styrene British standard ball & check valves 3/8” to 4”
ABS BS fittings in accordance to BS 5392 part 1 and BS 21
Refrigeration - good resistance to diluted inorganic acids.
Electrical & pneumatical ball valves BS standard 1/2” to 4”Salts, animal fats & oils, organic acids (-40oc + 60oc) -chilled water - air conditioning - vacuum demineralized water
PPHFittings for Polyfusion 20mm to 63mm DIN 16962
UNIPLAST 383 Industrial applications - (chemical & pharmaceutical)good resistance to acids, alkalis, salts, organic solventsPolypropylene
Homopolymer Threaded fittings 1/2” to 2”
Ball valves & check valves Polyfusion - Threaded 20mm to 63mmDIN 16962UNIPLAST 383ISO 228/1
Suitable up to 90oc
All threads in accordance to ISO 7/1, EN 10226, ISO 228/1
7
Materiali e Applicazioni
PVCu Applicazioni tipicheIl materiale plastico più usato Impianti industrialiAmpia scelta di misure di Raccordi Trattamento acque e dosaggio nell’industria chimicaOttima Resistenza chimica Trasporto liquidi alimentariElevata rigidità Impianti di piscine
Fornitura acqua freddaABSAmpio range di temperatura di utilizzo Acqua refrigerataElevata resistenza all’urto Trasporto acqua freddaResistenza all’abrasione Impianti tecniciAtossico Industria chimica e farmaceutica
PolipropileneElevata Resistenza all’urto Impianti chimiciOttime proprietà termiche e di isolamento termico Lavorazione di metalliEccellente Resistenza chimica Dosatura prodotti chimiciAdatto ad alte Temperature (fino a 110°C)
Guida alle applicazioni ABS PVCu PP-H
Acidi e Basi ✓ ✓ ✓Impianti di Condizionamento ✓Biotecnologie ✓ ✓ ✓Acqua Fredda ✓Vapore ✓Dosatura chimica ✓ ✓ ✓Spurghi chimici ✓Acqua raffreddata ✓Aria Compressa
Acqua Demineralizzata ✓ ✓ ✓
Guida alle applicazioni ABS PVCu PP-H
Trattamenti liquami ✓ ✓Galvanica ✓ ✓ ✓Film ✓ ✓ ✓Industria alimentare ✓ Gas ✓Trasporto glicole ✓Acqua calda/fredda ✓ ✓Materiali altamente corrosivi ✓Acqua calda ✓Irrigazione ✓ ✓
Guida alle applicazioni ABS PVCu PP-H
Marine ✓Farmaceutica ✓ ✓ ✓Acqua Potabile ✓ ✓Cartiere ✓ ✓Semi conduttori ✓ ✓ ✓Produzione malta liquida ✓Antiincendio
Piscine ✓ ✓Scarichi fognari ✓ ✓ ✓Trattamento acque ✓ ✓
Tutti i prodotti Effast sono compatibili con numerose applicazioni. Lo schema sotto mostra i dettagli delle più comuni applicazioni e il relativo prodotto Effast più indicato.
Materiali Range di produzione Misure Norme e Certificazioni ApplicazioniPVCu
Raccordi ad incollaggio metrici e in pollici da 16mm a 315mmda 3/8” a 8”
IIP No099/2005NF No 63-1P-01KIWA 21166/01
PiscineCloruro di Polivinile plastificatoad alta Densità Raccordi adattatori metrici/pollici da 1/2” a 4” EN1452
Raccordi di passaggio incollaggio/filettati da 16mm a 110mmda 3/8”a 4” WRAS-BSI KITE MARK 60041 Irrigazione – Agricoltura – Industria alimentare
Valvole a sfera e di non ritorno, metriche, in pollici, filettate da 16mm a 110mmda 1/2” a 4”
Raccordi conformi ISO 727 - DIN 8063 - EN1452-4 Industria edile
Valvole a farfalla da DN 65 a DN 300(da 63mm a 315mm) NFT 54/028 EN1452-4 Trattamento acque, acqua potabile, forniture, scarichi,
fognature.
Valvole a sfera con attuatore elettrico o pneumatico da 20mm a 110mm BS Raccordi conformi BS4346/1 EN1452-4 Industria chimica (-10 - + 60°C)
Valvole a farfalla con attuatore elettrico o pneumatico da 63mm a 315mm EN1452-4ABS Raccordi ad incollaggio serie in pollici da 1/2” a 8” WRAS - BSI KITE MARK 60042 Industri alimentare, trattamento acqueAcrilonitrilebutadiene Valvole a sfera e di non ritorno serie in pollici da 3/8” a 4”
ABS BS Raccordi conformi BS 5392 part 1 and BS 21
Impianti di refrigerazione, buona resistenza ai diluenti e agli acidi,.
Valvole con attuatore pneumatico o elettrico serie in pollici da 1/2” a 4” Sali, grassi animali, oli, acidi organici, (-40/+60), acque refrigerate, aria condizionata, acqua demineralizzata.
PPHRaccordi i polifusione da 20mm a 63mm DIN 16962
UNIPLAST 383 Applicazioni industriali (chimica e farmaceutica), buona resistenza agli acidi, basi, Sali, solventi organici.Polipropilene
Homopolimero Raccordi filettati 1/2” to 2”
Valvole a sfera e di non ritorno per polifusione e incollaggio da 20mm a 63mmDIN 16962UNIPLAST 383ISO 228/1
Adatto fino a 90oc
Raccordi conformi ISO 7/1, EN 10226, ISO 228/1
8
PVCu Pipe & FittingsTubi e Raccordi in PVCu
9
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
PVCu Pipe SystemsUnplasticised polyvinyl chloride (PVCu) is one of the most widely
used thermoplastic materials for pipe installations.
Being odourless and tasteless it is suitable for conveying potable
water and many food products. PVCu has excellent chemical
resistance.
The good flow characteristics are the result of the smooth bore and
has good resistance to abrasion. It is light in weight, easy to join
together making PVCu a good alternative to the more traditional
materials.
PVCu is resistant to most solutions of acids, alkalis, salts and
solvents that can be mixed with water. Additional information in
this respect can be obtained from our Technical Department.
MaterialsPolypipe Effast PVCu is stabilised with compounds conforming to
the EEC safety levels for vinyl chloride momomer (VCM) and the
WRAS requirements for use with potable water.
Colour
PVCu products are recognised by their dark grey colour RAL 7035.
Chemical ResistanceThe chemical resistance properties of PVCu are excellent: it is
resistant to most solutions of acids, alkalis and salts and to solvents
that can be mixed with water. PVCu is not resistant to aromatic
and chlorinated hydrocarbons.
StandardsIndividual products are in compliance with appropriate
Standards:
• EN ISO 15493
Plastics piping systems in PVC-U for industrial applications.
• EN uni EN ISO 1452
Characteristics of PVC-U fittings and pipes of piping systems for water supply.
• ISO 727
Pipes and fittings in PVC-U. Dimensions and tolerances metric series.
• ISO 4422
Characteristics of PVC-U fittings of piping systems for water supply.
• DIN 8063
PVC-U fittings, dimensions.
• KIWA
(Keurings Institut Voor Waterleiding Artikelen Holland)
KIWA BRL – K
504 e KIWA BRL – 502
Characteristics of PVC-U fittings and pipes of piping systems for water supply.
• BSI (British Standard Institution UK) BS 4346-1
Characteristics of PVC-U fittings of piping systems for fluids under pressure.
• BS 3505-3506
Characteristics of PVC-U pipes for industrial fluids and cold water.
• UNI ISO 228/1:1983
PVC-U fittings with threaded connections.
Tubi e Raccordi in PVCu Il Cloruro di Polivinile Non Plastificato (PVCu) è uno dei più diffusi
materiali termoplastici per la costruzione di sistemi di adduzione
liquidi in pressione attraverso raccordi e tubi.
Il PVCu può essere utilizzato anche in ambito alimentare essendo
un materiale inodore ed insapore.
Un materiale che offre un’eccellente resistenza chimica e che
è caratterizzato da superfici lineari, difficilmente esposte ad
abrasioni, tali da garantire buona scorrevolezza ai flussi.
I raccordi in PVCu sono leggeri ed è molto facile collegarli fra
loro ed ai tubi così da comporre un sistema realmente alternativo
rispetto ai materiali tradizionali.
Il PVCu è resistente alla maggior parte degli acidi, dei prodotti
alcalini, dei sali e dei solventi che possono trovarsi all’interno dei
diversi liquidi; con particolare riguardo a questi aspetti, ulteriori
informazioni possono essere facilmente ottenute contattando i
nostri Uffici e chiedendo dei nostri tecnici.
Materia PrimaIl PVCu utilizzato dalla Polypipe è stabilizzato con additivi privi
di metalli pesanti e conformi a quanto stabilito dalle normative
europee in tema di compatibilità con l’acqua potabile.
Colore I prodotti in PVCu sono riconoscibili per il loro caratteristico colore grigio RAL 7035.
Resistenza ChimicaLe proprietà di resistenza chimica del PVCu sono eccellenti; il PVCu
è resistente alla maggior parte degli acidi, dei prodotti alcalini, dei
sali e dei solventi che possono trovarsi all’interno dei diversi liquidi;
il PVCu non resiste agli idrocarburi aromatici e clorurati.
StandardsI singoli prodotti sono prodotti in conformità con i seguenti
riferimenti normativi:
• EN ISO 15493
Sistemi di componenti (Tubi, Raccordi e Valvole) in PVC-U per applicazioni
industriali.
• UNI EN ISO 1452
Caratteristiche di raccordi e tubi di PVC-U per i sistemi di tubazioni nel campo
dell’adduzione d’acqua.
• ISO 727
Tubi e raccordi in PVC-U. Dimensioni e tolleranze serie metrica.
• ISO 4422
Caratteristiche dei raccordi di PVC-U per i sistemi di tubazioni nel campo
dell’adduzione d’acqua.
• DIN 8063
Raccordi in PVC-U, dimensioni.
• KIWA (Keurings Institut Voor Waterleiding Artikelen Holland)
KIWA BRL – K 504 e KIWA BRL – 502
Caratteristiche di raccordi e tubi di PVC-U per i sistemi di tubazioni nel campo
dell’adduzione d’acqua.
PVCu Pipe & FittingsTubi e Raccordi in PVCu
10
• DIN 2999
PVC-U fittings with threaded connections.
• BS 21
PVC-U fittings with threaded connections.
• ISO R7:1984
PVC-U fittings with threaded connections sealing tight.
• ISO 161/1
PVC-U pipes and fittings dimensions, metric series.
• DIN 8062
PVC-U pipes dimensions.
• ASTM D696 e DIN 53752
Coefficient of linear thermal expansion, test and method.
• DVS 2204 - 2221
Solvent welding of thermoplastic materials PVC-U
UNI 11242 Solvent welding of PVC-U pipes, fittings and valves
• ISO 9393
Thermoplastics valves-pressure test methods and requirements.
Industrial valves-Ball valves of thermoplastic materials.
• EN ISO 16136
Industrial valves-Butterfly valves of thermoplastic materials.
• EN ISO 16137
Industrial valves-Check valves of thermoplastic materials.
• EN ISO 16138
Industrial valves-Diaphragm valves of thermoplastic materials.
• EN 558-1
Industrial valves-Face-to-face and center-to-face dimensions of metal valves for use
in flanged pipe systems - Part 1: PN-designated valves.
• EN 1092-1
Flanges and their joints-Circular flanges for pipes, valves fittings and accessories-
Part 1: Steel flanges, PN designated
• DIN 3202
Face-to-face and centre-to-face dimensions of valves.
• DIN 3441-2
Ball valves; dimensions.
• BSI (British Standard Institution UK) BS 4346-1
Caratteristiche dei raccordi in PVC-U per i sistemi di tubazioni nel trasporto dei fluidi
in pressione.
• BS 3505-3506
Caratteristiche dei tubi in PVC-U per applicazioni di fluidi industriali
e acqua fredda.
• UNI ISO 228/1:1983
Raccordi in PVC-U con terminali filettati.
• DIN 2999
Raccordi in PVC-U con terminali filettati.
• BS 21
Raccordi in PVC-U con terminali filettati.
• ISO R7:1984
Raccordi in PVC-U con terminali filettati per accoppiamento a tenuta.
• ISO 161/1
Dimensioni di tubi e raccordi in PVC-U serie metrica
• DIN 8062
Dimensioni di tubi in PVC-U.
• ASTM D696 e DIN 53752
Coefficiente di dilatazione termica lineare, test e metodo di prova.
• DVS 2204 - 2221
Incollaggio di materiali termoplastici PVC-U.
• UNI 11242
Giunzione mediante incollaggio di tubi, raccordi e valvole in PVC-U
• ISO 9393
Valvole termoplastiche - metodi e requisiti dei test di pressione.
• EN ISO 16135
Valvole industriali- Valvole a sfera di materiale termoplastico.
• EN ISO 16136
Valvole industriali- Valvole a farfalla di materiale termoplastico.
• EN ISO 16137
Valvole industriali- Valvole di ritegno di materiale termoplastico.
• EN ISO 16138
Valvole industriali- Valvole a membrana di materiale termoplastico.
• EN 558-1
Valvole industriali - dimensioni di ingombro esterne di valvole metalliche per
l’utilizzo in sistemi di tubazioni flangiate - Parte 1: progettazione secondo PN.
• EN 1092-1
Flange e loro giunzioni - Flange circolari per tubazioni, raccordi valvole e accessori
- Parte 1: Flange di acciaio, progettazione secondo PN.
• DIN 3202
Dimensioni di ingombro valvole.
• DIN 3441-2
Dimensioni delle valvole a sfera in PVCu
WRAS ApprovalWater Regulations Advisory Scheme. Approved product for potable water / Prodotto approvato per acqua potabile
Kitemark Licence Fittings No. KM 60041
11
Misure British Standard e metriche
Le note che seguono possono essere utili per coloro che hanno scarsa
familiarità con i diversi sistemi di misura (metrici o in pollici) usati
nelle specifiche dei tubi in PVCu.
Quando il sistema di misura utilizzato è quello “in pollici” si fa
riferimento al diametro nominale interno (dei tubi) espresso in pollici
ed in frazioni di pollici.
I sistemi metrici fanno riferimento al diametro esterno dei tubi
espresso in millimetri.
Come linea guida generale, la tabella che segue fornisce un
confronto fra misure in pollici e metriche fino ad 8 pollici. E’
importante sottolineare che le misure metriche non derivano dalla
semplice conversione delle misure in pollici; ad eccezione della
misura di 2 pollici e mezzo (esattamente corrispondente alla misura
metrica di 75 mm) il sistema in pollici ed il sistema metrico non sono
intercambiabili; non c’è equivalenza fra i due sistemi.
Misure in pollici (inches) Misure metriche (mm)
diametro nominale tubo esterno dia. tubo esterno dia. diametro nominale
3/8” 17.1 16 10
1/2” 21.4 20 15
3/4” 26.7 25 20
1” 33.6 32 25
11/4” 42.2 40 32
11/2” 48.3 50 40
2” 60.3 63 50
21/2” 75.2 75 65
3” 88.9 90 80
4” 114.3 110 100
5” 140.2 140 125
6” 168.3 160 150
8” 219.1 225 200
Dilatazione termicaIl coefficiente di dilatazione lineare termica per il PVCu è 7,8 x
10-5m/m. °C.
Vi sono determinate situazioni nelle quali è necessario considerare
attentamente la dilatazione e la contrazione termica del materiale.
Nel grafico che segue presentiamo un confronto tra la dilatazione
termica del PVCu e la dilatazione termica di materiali alternativi:
Imperial and Metric SizesThe following notes may be helpful to those unfamiliar with the
different ways of describing metric and imperial sizes when specifying
pipe or fittings.
When specifying imperial pipe fittings and other components
reference is made to the nominal size of the pipe bore in inches and
fractions of an inch.
Metric Systems are specified by reference to the outside diameter of
the pipe expressed in millimetres.
As a general guide the following table gives a comparison between
metric and imperial sizes up to 8 inches. It is important to understand
that metric sizes are not simply inch sizes which have been converted
into millimetres and called metric. The actual equivalents are slightly
different (except for Imperial size 21/2 inches and metric size 75mm
and 5 inches and 140mm which happen to coincide exactly) and are
not interchangeable.
Imperial Sizes (inches) Metric Sizes (mm)
Nominal bore Pipe outside dia. Pipe outside dia. Nominal bore
3/8” 17.1 16 10
1/2” 21.4 20 15
3/4” 26.7 25 20
1” 33.6 32 25
11/4” 42.2 40 32
11/2” 48.3 50 40
2” 60.3 63 50
21/2” 75.2 75 65
3” 88.9 90 80
4” 114.3 110 100
5” 140.2 140 125
6” 168.3 160 150
8” 219.1 225 200
Thermal ExpansionThe thermal coefficient of linear expansion for PVCu is 7.8 x
10-5m/m.°C
It is necessary in certain situations to make special provision for this
expansion and contraction.
Thermal expansion of PVCu is compared with other materials, in
the following chart.
Range di temperatura 0°C – 60°C
Polipropilene
Acciao Dolce
Acciao Inox 18/8
Rame
Temperature range 0°C – 60°C
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
12
General properties of PVCuPVCu is thermally stable in the temperature range 0°C to 60°C,
however at low temperatures the impact strength of PVCu
decreases. It is therefore not recommended for use at very low
temperatures unless there is no likelihood of the piping materials
being disturbed or subjected to impact damage. PVCu is free from
toxic metals thus ensuring that it is physiologically harmless for
drinking water and foodstuffs applications.
Some important advantages of PVCu are:
• Extensive choice of component parts
• Wide range of applications
• Good chemical and corrosion resistance
• Safe for potable water applications
• Low friction loss
• Self extinguishing
• High mechanical strength
• Simplified installation techniques using solvent cement welding
• Approved for potable water applications
Properties of PVCu (Average values)
Property Value
Density 1.38 g/cm3
Tensile Strength 55 N/mm2
Elongation at Break >30 %
Impact Strength No crack kJ/m2 (23°C)
Modulus of Elasticity (Young’s Modulus) 3000 N/mm2
Coefficient of Linear Expansion 0.08 mm/m °C
Maximum Operating Temperature 60°C
Minimum Operating Temperature 0°C
Vicat Softening Point >76°C (VST/B 50)
Water Absorption <4 mg/cm3
Surface Resistance Approx. 1013 Ω
Thermal Conductivity 0.140 W/m · K
Flammability V-0 UL94
Colour 7035 Dark Grey RAL
Simbol and Explanation PFA - Allowable operating pressure:
Maximum hydrostat ic pressure that a componenti s capable of
withstanding continuosly in service. (EN 805:2002).
PMA - Allowable maximum operating pressure:
maximum pressure occurring from time to time, including
surge, that a component is capable of withstanding in service.
(EN 805:2002).
PEA - Allowable site test pressure: maximum hydrostatic pressure
that a newly installed component is capable of withstanding for
a relatively short duration, in order to ensure the integry and
tightness of the pipeline. (EN 805:2002).
Rp - Designation of parallel internal thread.
R - Designation of taper external thread.
DN - Nominal Diameter
d - Pipe outside Diameter
Propietà generali del PVCuIl Cloruro di Polivinile non Plastificato PVC-U è stabile
termicamente nell’intervallo di temperatura fra 0 e 60 °C. La
resistenza all’urto del materiale decresce al diminuire della
temperatura. Non è indicato all’uso con temperature molto basse
per il rischio di fragilità all’impatto. Il PVCu è esente da metalli
pesanti e questo permette l’uso per il contatto con acqua potabile
e applicazioni alimentari.
Alcuni importanti vantaggi dell’uso del PVCu sono:
• Ampia gamma raccordi e valvole
• Ampi campi di applicazione
• Buona resistenza chimica e alla corrosione
• Indicato per l’uso con acqua potabile
• Basse perdite di carico
• Autoestinguenza
• Buona resistenza meccanica
• Facilità di installazione usando l’incollaggio
• Approvato per applicazioni con acqua potabile
Proprietà del PVC u (Valori medi)
Proprietà Valore
Densità 1.38 g/cm3
Resistenza alla trazione 55 N/mm2
Allungamento a rottura >30 %
Resistenza all’urto No crack kJ/m2 (23°C)
Modulo di elasticità 3000 N/mm2
Coefficiente di espansione lineare 0.08 mm/m °C
Massima Temperatura di esercizio 60°C
Minima Temperatura di esercizio 0°C
Punto di rammollimento Vicat >76°C (VST/B 50)
Assorbimento d’acqua <4 mg/cm3
Resistenza superficiale 1013 Ω
Conducibilità Termica 0.140 W/m · K
Infiammabilità V-0 UL94
Colore 7035 Dark Grey RAL
Simboli e definizioni PFA - Pressione di esercizio ammissibile:
Massima pressione idrostatica che un componente è capace di
mantenere in servizio continuo (UNI EN 805:2002). Alla temperatura
di 20°C e per 50 anni di servizio corrisponde alla definizione di PN.
PMA - Massima Pressione di esercizio Ammissibile:
Massimi picchi occasionali di pressione (inclusi i disturbi dovuta
sovrapressioni), che un componente è in grado di mantenere in
servizio continuo (UNI EN 805:2002).
PEA - Pressione di Collaudo ammissibile:
Massima pressione idrostatica che un componente nuovo, una
volta installato, è capace di mantenere per un periodo di tempo
relativamente corto, allo scopo di assicurare l’integrità e la tenuta
della condotta (UNI EN 805:2002).
Rp - Filettatura interna cilindrica UNI EN 10226 a tenuta sul filetto.
R - Filettatura esterna conica UNI EN 10226 a tenuta sul filetto.
DN - Diametro Nominale
d - Diametro esterno del tubo
13
Temperature & Pressure Relationship (Metric)Temp °C PFA (PN) 16 PFA (PN) 10
0°C – 25°C 16 10
25°C – 30°C 14.4 9
30°C – 35 °C 12.8 8
35°C– 40°C 11.2 7
40°C- 45°C 10 6.25
Relazione fra Temperature e Pressioni (PFA) (Metrico)Temp °C PFA (PN) 16 PFA (PN) 10
0°C – 25°C 16 10
25°C – 30°C 14.4 9
30°C – 35 °C 12.8 8
35°C– 40°C 11.2 7
40°C- 45°C 10 6.25
Pressure Ratings Fittings & Valves ImperialUnless otherwise indicated the pressure ratings are as follows
Product Size Pressure Rating
Solvent Cement Fittings 3/8" - 6" 15 bar (217 PSI)
Solvent Cement Fittings 8" 9 bar (130 PSI)
Adaptor Fittings BS/Metric 1/2" - 4" 15 bar (217 PSI)
Valves 3/8" - 2" 16 bar (232 PSI)
Valves 2 1/2" - 4" 10 bar (145 PSI)
All pressure ratings are at 20°C
Pressioni di Esercizio Raccordi e Valvole British StandardPressione di Esercizio Raccordi e Valvole in Pollici. Se non diversamente indicato le pressioni di esercizio sono le seguenti:
Prodotto Misure Pressione Nominale
Raccordi a incollaggio 3/8" - 6" 15 bar (217 PSI)
Raccordi a incollaggio 8" 9 bar (130 PSI)
Raccordi di passaggio 1/2" - 4" 15 bar (217 PSI)
Valvole 3/8" - 2" 16 bar (232 PSI)
Valvole 2 1/2" - 4" 10 bar (145 PSI)
Tutte le pressioni sono a 20°C
Pressure Ratings Fittings & Valves MetricUnless otherwise indicated the pressure ratings are as follows
Product Size mm Pressure Rating
SOLVENT CEMENT FITTINGS 16 - 160 16 bar (232 PSI)
SOLVENT CEMENT FITTINGS 200 - 315 10 bar (145 PSI)
SOLVENT CEMENT VALVES 16 - 63 16 bar (232 PSI)
SOLVENT CEMENT VALVES 75 - 110 10 bar (145 PSI)
THREADED FITTINGS 3/8" - 4" 16 bar (232 PSI)
THREADED VALVES 3/8" - 2" 16 bar (232 PSI)
THREADED VALVES 2.1/2" - 4" 10 bar (145 PSI)
All pressure ratings are at 20°C
Pressione di Esercizio Raccordi e Valvole MetriciSe non diversamente indicato le pressioni di esercizio sono le seguenti:
Prodotto Misure Pressione Nominale
Raccordi a incollaggio 16 - 160 16 bar (232 PSI)
Raccordi a incollaggio 200 - 315 10 bar (145 PSI)
Valvole a incollaggio 16 - 63 16 bar (232 PSI)
Valvole a incollaggio 75 - 110 10 bar (145 PSI)
Raccordi filettati 3/8" - 4" 16 bar (232 PSI)
Valvole Filettate 3/8" - 2" 16 bar (232 PSI)
Valvole Filettate 2.1/2" - 4" 10 bar (145 PSI)
Tutte le pressioni sono a 20°C
British StandardTemp°C Class C Class D Class E
BAR PSI BAR PSI BAR PSI
0 9.0 130 12.0 173 15.0 217
20 9.0 130 12.0 173 15.0 217
30 8.1 117 10.8 155 13.5 195
35 7.2 104 9.6 138 12.0 173
40 6.3 91 8.4 121 10.5 152
45 5.4 78 7.2 104 9.0 130
50 4.0 58 5.4 78 6.7 97
55 2.7 39 3.6 52 4.5 65
60 1.3 19 1.8 26 2.2 32
British StandardTemp°C Class C Class D Class E
BAR PSI BAR PSI BAR PSI
0 9.0 130 12.0 173 15.0 217
20 9.0 130 12.0 173 15.0 217
30 8.1 117 10.8 155 13.5 195
35 7.2 104 9.6 138 12.0 173
40 6.3 91 8.4 121 10.5 152
45 5.4 78 7.2 104 9.0 130
50 4.0 58 5.4 78 6.7 97
55 2.7 39 3.6 52 4.5 65
60 1.3 19 1.8 26 2.2 32
All threaded fittings are parallel threaded unless stated. ie. BSP female and BSP male are parallel. BSPT = BSP taper thread
Tutte le filettature dei raccordi sono del tipo parallelo se non altrimenti specificato. Es.: BSP Maschio e BSP Femmina sono Paralleli. BSPT = BSP filettatura conica.
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
14
PVCu Pipe & Fittings
Useful InformationThe following information may be helpful in understanding the specification of metric and imperial sizes and pressure ratings when selecting pipe.
When specifying imperial pipe, fittings and other components, reference is made to the nominal size of the pipe bore in inches and fractions of an
inch. With metric systems, reference is made to the outside diameter and is expressed in millimetres. It is important to note that with the exception
of 2½"/75mm and 5"/140mm the systems are not interchangeable.
For temperature and pressure relationship for PVCu pipes, please see page 7.
For imperial and metric size information for PVCu pipes, please see page 6.
PVC Pipesfor irrigation, industry, acqueducts and sewage
Dark grey colour RAL 7011
Total standard length of 6 mt.
Quality marks in accordance to standards:
U-PVC pipes for pressure conducts are guaranteed by the Quality mark of the Italian Institute of Plastics, CSTB, DVGW and GOST.
Non Potable Applications For non-potable applications, locally produced pipe is also avaiable. Please contact your Polypipe Effast distributor
PVCu metric pressure pipes
PVCu pressure pipes
Nominal Size
16 - - - -
20 - - - 16 Bar
25 - - 12,5 Bar 16 Bar
32 - - 12,5 Bar 16 Bar
40 6 Bar 10 Bar 12,5 Bar 16 Bar
50 6 Bar 10 Bar 12,5 Bar 16 Bar
63 6 Bar 10 Bar 12,5 Bar 16 Bar
75 6 Bar 10 Bar 12,5 Bar 16 Bar
90 6 Bar 10 Bar 12,5 Bar 16 Bar
110 6 Bar 10 Bar 12,5 Bar 16 Bar
160 6 Bar 10 Bar 12,5 Bar 16 Bar
200 6 Bar 10 Bar 12,5 Bar 16 Bar
225 6 Bar 10 Bar 12,5 Bar 16 Bar
250 6 Bar 10 Bar 12,5 Bar 16 Bar
315 6 Bar 10 Bar 12,5 Bar 16 Bar
PVCu imperial pressure pipes
PVCu pressure pipes
Nominal Size Pressure rating
1/2" Class E
3/4" Class E
1" Class E
11/4" Class E
11/2" Class E
2" Class E
3" Class E
4" Class E
6” Class E
8" Class E
Pipes typically supplied in 6m lengths, plain ended
Also available with solvent weld or rubber ring sockets by special request
Please contact your local Effast distributor for further details
For applications requiring specific material approvals, please check with your local distributor prior to installation
Pressure rating
15
Tubi e Raccordi in PVCu
Informazioni UtiliLe seguenti informazioni possono essere utili per comprendere le specifiche delle misure metriche e in British Standard e le relative pressioni di esercizio per scegliere le dimensioni dei tubi.
Quando si scelgono tubi, raccordi e altri componenti in pollici, il riferimento è per la misura nominale dell’interno del tubo in pollici e frazioni di pollici. Con le misure metriche
il riferimento è per il diametro esterno espresso in millimetri. É importante notare che con l’eccezione della misura di 75mm/2”1/2” e 140mm/5” i due sistemi non sono
intercambiabili.
Per le relazioni fra Temperature e pressioni dei tubi vedi pag. 7.
Per informazioni sulle misure metriche e in pollici vedi pag. 6
Tubi PVCper irrigazione, industria, acquedottistica e acque reflue
Colore grigio scuro RAL 7011
Lunghezza totale standard di 6 mt.
Marchio di conformità alle norme:
I tubi in PVC rigido per condotte in pressione sono garantiti dal marchio di conformità dell’lstituto Italiano dei plastici, CSTB, DVGW e GOST.
Applicazioni per Acqua non Potabile Per trasporto di acqua potabile per favore contatta il tuo distributore Effast Polypipe.
PVCu tubi pressione
Tubi a pressione PVCu
Misura nominale
16 - - - -
20 - - - 16 Bar
25 - - 12,5 Bar 16 Bar
32 - - 12,5 Bar 16 Bar
40 6 Bar 10 Bar 12,5 Bar 16 Bar
50 6 Bar 10 Bar 12,5 Bar 16 Bar
63 6 Bar 10 Bar 12,5 Bar 16 Bar
75 6 Bar 10 Bar 12,5 Bar 16 Bar
90 6 Bar 10 Bar 12,5 Bar 16 Bar
110 6 Bar 10 Bar 12,5 Bar 16 Bar
160 6 Bar 10 Bar 12,5 Bar 16 Bar
200 6 Bar 10 Bar 12,5 Bar 16 Bar
225 6 Bar 10 Bar 12,5 Bar 16 Bar
250 6 Bar 10 Bar 12,5 Bar 16 Bar
315 6 Bar 10 Bar 12,5 Bar 16 Bar
PVCu tubi pressione British Standard
Tubi a pressione PVCu
Misura nominale Pressione nominale
1/2" Class E
3/4" Class E
1" Class E
11/4" Class E
11/2" Class E
2" Class E
3" Class E
4" Class E
6” Class E
8" Class E
Il tubo è fornito della lunghezza di 6 mt
Disponibile anche per giunzioni per saldatura e con anello di tenuta di gomma
Contatta il distributore Effast per ulteriori dettagli
Per applicazioni che richiedono materiali certificati contatta il tuo distributore prima dell’installazione
Pressione nominale
16
PVCu solvent cement fittings metric / Raccordi a incollaggio Metrici
Elbow 90° plain / Gomito 90°
Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
16 - RDRGOD0160 14 9 23 S 13
20 - RDRGOD0200 16 11 27 S 20
25 - RDRGOD0250 19 13 33 M 35
32 - RDRGOD0320 22 17 41 M 60
40 - RDRGOD0400 26 22 50 M 90
50 - RDRGOD0500 30 26 60 L 135
63 - RDRGOD0630 38 32 74 L 220
75 - RDRGOD0750 45 39 89 L 375
90 - RDRGOD0900 51 46 105 L 600
110 - RDRGOD1100 61 56 130 L 1050
125 - RDRGOD1250 72 63 145 L 1350
140 - RDRGOD1400 79 73 164 L 2000
160 - RDRGOD1600 89 81 187 L 3200
200* RDRGOD2000 106 102 230 L 5850
225* RDRGOD2250 119 114 257 L 7500
250* RDRGOD2500 132 185 285 L 12480
280* RDRGOD2800 143 216 318 L 17000
315* RDRGOD3150 164 239 360 L 23370
Elbow 45° plain / Gomito 45°
Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
16 - RDRGYD0160 14 6 23 S 10
20 - RDRGYD0200 17 4 28 S 17
25 - RDRGYD0250 19 7 33 M 30
32 - RDRGYD0320 22 8 41 M 47
40 - RDRGYD0400 26 10 50 M 77
50 - RDRGYD0500 32 11 62 L 115
63 - RDRGYD0630 37 14 75 L 154
75 - RDRGYD0750 43 17 88 L 310
90 - RDRGYD0900 51 22 106 L 451
110 - RDRGYD1100 61 24 128 L 835
125 - RDRGYD1250 69 27 145 L 1080
140 - RDRGYD1400 77 30 163 L 1640
160 - RDRGYD1600 87 35 185 L 2100
200* RDRGYD2000 106 42 232 L 5000
225* RDRGYD2250 119 48 258 L 6200
250* RDRGYD2500 131 57 288 L 7700
280* RDRGYD2800 147 59 322 L 10460
315* RDRGYD3150 165 66 360 L 15500
IIP - kiwa - NF - BSI
GOD
GYD
17
PVCu Pipe & FittingsPVCu Pipe & Fittings / Tubi e Raccordi in PVCu
PVCu solvent cement fittings metric / Raccordi a incollaggio Metrici
Socket plain / Manicotto
Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
16 - RDRMAD0160 14 3 23 S 9
20 - RDRMAD0200 16 4 26 S 15
25 - RDRMAD0250 19 4 33 M 23
32 - RDRMAD0320 22 4 41 M 36
40 - RDRMAD0400 26 5 51 M 60
50 - RDRMAD0500 31 4 60 L 85
63 - RDRMAD0630 38 4 74 L 145
75 - RDRMAD0750 43 6 88 L 218
90 - RDRMAD0900 50 7 105 L 348
110 - RDRMAD1100 61 5 128 L 605
125 - RDRMAD1250 69 7 145 L 840
140 - RDRMAD1400 76 11 161 L 1100
160 - RDRMAD1600 86 8 182 L 1400
200 RDRMAD2000 106 14 230 L 2600
225* RDRMAD2250 118 14 247 L 4100
250* RDRMAD2500 133 10 286 L 6000
280* RDRMAD2800 147 10 318 L 7630
315* RDRMAD3150 167 13 354 L 9780
Tee 90° plain / Raccordo T 90°
Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
16 - RDRTID0160 14 9 23 S 15
20 - RDRTID0200 17 11 27 M 25
25 - RDRTID0250 19 14 33 M 44
32 - RDRTID0320 22 18 42 M 75
40 - RDRTID0400 26 21 51 M 120
50 - RDRTID0500 31 26 62 L 172
63 - RDRTID0630 38 33 76 L 300
75 - RDRTID0750 44 39 89 L 495
90 - RDRTID0900 51 47 106 L 790
110 - RDRTID1100 61 56 130 L 1452
125 - RDRTID1250 72 64 145 L 2100
140 - RDRTID1400 79 72 162 L 2550
160 - RDRTID1600 89 81 188 L 4100
200* RDRTID2000 106 101 232 L 7362
225* RDRTID2250 119 114 258 L 9700
250* RDRTID2500 131 128 287 L 13250
280* RDRTID2800 147 143 318 L 17840
315* RDRTID3150 165 166 359 L 25300
IIP - kiwa - NF - BSI
MAD
TID
18
PVCu solvent cement fittings metric / Raccordi a incollaggio Metrici
Cap plain / Calotta
Nominal SizeMisura nominale
CodeCodice L H E Pack
ImballoWeight (GR)
Peso
16 RDRCAD0160 16 22 23 S 7
20 - RDRCAD0200 16 30 27 S 10
25 - RDRCAD0250 19 31 33 S 18
32 - RDRCAD0320 23 36 41 S 30
40 - RDRCAD0400 27 43 51 M 45
50 - RDRCAD0500 33 49 61 M 65
63 - RDRCAD0630 38 57 75 M 110
75 - RDRCAD0750 45 67 88 M 208
90 - RDRCAD0900 52 81 105 L 325
110 - RDRCAD1100 63 97 128 L 500
125 - RDRCAD1250 69 99 145 L 670
140 - RDRCAD1400 77 107 161 L 920
160* - RDRCAD1600 87 126 182 L 1120
200* RDRCAD2000 106 166 231 L 1680
225* RDRCAD2250 118 173 247 L 2978
Bend 90° short radius plain / Curva 90°
Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
20 RDRCUD0200 16 41 30 M 30
25 RDRCUD0250 19 51 36 M 50
32 RDRCUD0320 22 64 44 M 92
40 RDRCUD0400 26 80 53 M 165
50 RDRCUD0500 31 100 62 L 270
63 RDRCUD0630 38 127 75 L 490
75 RDRCUD0750 44 151 94 L 990
90 RDRCUD0900 50 180 113 L 1600
110 RDRCUD1100 61 220 137 L 2150
Reducing socket plain / Riduzione Lunga
Nominal SizeMisura nominale
CodeCodice L1 L2 Z E2 E1 Pack
ImballoWeight (GR)
Peso
20 x 25 x 16 RDRRLD020A 16 14 6 23 S 15
20 x 25 x 20 RDRRLD020B 19 16 6 28 S 25
25 x 32 x 16 RDRRLD025A 22 19 6 33 S 35
25 x 32 x 20 RDRRLD025B 26 22 10 41 S 75
25 x 32 x 25 RDRRLD025C 31 26 12 50 S 110
32 x 40 x 20 RDRRLD032B 38 26 17 50 S 140
32 x 40 x 25 RDRRLD032C 38 31 12 61 S 130
32 x 40 x 32 RDRRLD032D 44 38 18 75 S 295
40 x 50 x 25 RDRRLD040C 51 44 16 88 M 525
40 x 50 x 32 RDRRLD040D 61 51 17 106 M 530
40 x 50 x 40 RDRRLD040E 69 61 17 129 M 580
50 x 63 x 32 RDRRLD050D 76 61 18 129 M 905
50 x 63 x 40 RDRRLD050E 39 26 5 50 63 M
50 x 63 x 50 RDRRLD050F M
63 x 75 x 40 RDRRLD063E M
63 x 75 x 50 RDRRLD063F M
IIP - kiwa - NF - BSI
CAD
CUD
RLD
19
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
PVCu solvent cement fittings metric / Raccordi a incollaggio Metrici
Reducing socket plain / Riduzione Lunga
Nominal SizeMisura nominale
CodeCodice
PackImballo
Weight (GR)Peso
63 x 75 x 63 RDRRLD063G M 140
75 x 90 x 50 RDRRLD075F M 204
75 x 90 x 63 RDRRLD075G M 222
75 x 90 x 75 RDRRLD075H M 320
90 x 110 x 50 RDRRLD090F M 364
90 x 110 x 63 RDRRLD090G M 375
90 x 110 x 75 RDRRLD090H M 400
90 x 110 x 90 RDRRLD090I M 434
110 x 125 x 63 RDRRLD110G M 400
110 x 125 x 75 RDRRLD110H L 520
110 x 125 x 90 RDRRLD110I L 530
110 x 125 x 110 RDRRLD110L L 471
125 x 140 x 90 RDRRLD125I L 580
125 x 140 x 110 RDRRLD125L L 580
125 x 140 x 125 RDRRLD125M L 590
140 x 160 x 110 RDRRLD140L L 930
140 x 160 x 125 RDRRLD140M L 940
160 x - x 140 RDRRLD160N L 1350
200 x - x 160 RDRRLD200O L 2545
Tee 45° plain / Raccordo T 45°
Nominal SizeMisura nominale
CodeCodice L Z1 Z2 Pack
ImballoWeight (GR)
Peso
20 RDRTYD0200 16 7 29 S 36
25 RDRTYD0250 19 7 36 S 59
32 RDRTYD0320 22 8 44 M 103
40 RDRTYD0400 26 10 54 M 125
50 RDRTYD0500 31 12 65 M 254
63 RDRTYD0630 38 14 80 M 420
RDRTYD0750
Cross 90° plain / Raccordo a Croce 90°
Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
20 RDRCRD0200 16 11 28 S 30
25 RDRCRD0250 19 14 34 S 60
32 RDRCRD0320 22 17 42 M 110
40 RDRCRD0400 26 21 51 M 180
50 RDRCRD0500 31 26 61 M 270
63 RDRCRD0630 38 33 75 M 510
75 RDRCRD0750 M 710
90 RDRCRD0900 L 950
110 RDRCRD1100 L 1840
IIP - kiwa - NF - BSI
CRD
TYD
PVCu solvent cement fittings metric / Raccordi a incollaggio Metrici
Cap plain / Calotta
Nominal SizeMisura nominale
CodeCodice L H E Pack
ImballoWeight (GR)
Peso
16 RDRCAD0160 16 22 23 S 7
20 - RDRCAD0200 16 30 27 S 10
25 - RDRCAD0250 19 31 33 S 18
32 - RDRCAD0320 23 36 41 S 30
40 - RDRCAD0400 27 43 51 M 45
50 - RDRCAD0500 33 49 61 M 65
63 - RDRCAD0630 38 57 75 M 110
75 - RDRCAD0750 45 67 88 M 208
90 - RDRCAD0900 52 81 105 L 325
110 - RDRCAD1100 63 97 128 L 500
125 - RDRCAD1250 69 99 145 L 670
140 - RDRCAD1400 77 107 161 L 920
160* - RDRCAD1600 87 126 182 L 1120
200* RDRCAD2000 106 166 231 L 1680
225* RDRCAD2250 118 173 247 L 2978
Bend 90° short radius plain / Curva 90°
Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
20 RDRCUD0200 16 41 30 M 30
25 RDRCUD0250 19 51 36 M 50
32 RDRCUD0320 22 64 44 M 92
40 RDRCUD0400 26 80 53 M 165
50 RDRCUD0500 31 100 62 L 270
63 RDRCUD0630 38 127 75 L 490
75 RDRCUD0750 44 151 94 L 990
90 RDRCUD0900 50 180 113 L 1600
110 RDRCUD1100 61 220 137 L 2150
Reducing socket plain / Riduzione Lunga
Nominal SizeMisura nominale
CodeCodice L1 L2 Z E2 E1 Pack
ImballoWeight (GR)
Peso
20 x 25 x 16 RDRRLD020A 16 14 6 23 S 15
20 x 25 x 20 RDRRLD020B 19 16 6 28 S 25
25 x 32 x 16 RDRRLD025A 22 19 6 33 S 35
25 x 32 x 20 RDRRLD025B 26 22 10 41 S 75
25 x 32 x 25 RDRRLD025C 31 26 12 50 S 110
32 x 40 x 20 RDRRLD032B 38 26 17 50 S 140
32 x 40 x 25 RDRRLD032C 38 31 12 61 S 130
32 x 40 x 32 RDRRLD032D 44 38 18 75 S 295
40 x 50 x 25 RDRRLD040C 51 44 16 88 M 525
40 x 50 x 32 RDRRLD040D 61 51 17 106 M 530
40 x 50 x 40 RDRRLD040E 69 61 17 129 M 580
50 x 63 x 32 RDRRLD050D 76 61 18 129 M 905
50 x 63 x 40 RDRRLD050E 39 26 5 50 63 M
50 x 63 x 50 RDRRLD050F M
63 x 75 x 40 RDRRLD063E M
63 x 75 x 50 RDRRLD063F M
IIP - kiwa - NF - BSI
RLD
20
PVCu solvent cement fittings metric / Raccordi a incollaggio Metrici
Tee 90° reduced on branch plain / Raccordo a T ridotto
Nominal SizeMisura nominale
CodeCodice L1 L2 Z1 Z2 E1 E2 Pack
ImballoWeight (GR)
Peso
20 x 16 RDRTRD020A 16 13 11 11 28 23 S 26
25 x 16 RDRTRD025A 19 14 14 14 33 23 M 40
25 x 20 RDRTRD025B 19 16 14 14 34 28 M 42
32 x 16 RDRTRD032A 23 16 18 18 42 23 M 68
32 x 20 RDRTRD032B 23 16 18 18 42 28 M 69
32 x 25 RDRTRD032C 23 19 18 18 42 34 M 70
40 x 20 RDRTRD040B 27 16 21 21 50 28 M 105
40 x 25 RDRTRD040C 26 19 21 21 51 34 M 107
40 x 32 RDRTRD040D 27 22 21 21 50 42 M 112
50 x 20 RDRTRD050B 31 15 26 26 61 28 L 155
50 x 25 RDRTRD050C 31 19 26 26 61 34 L 157
50 x 32 RDRTRD050D 31 22 26 26 61 42 L 162
50 x 40 RDRTRD050E 31 26 26 26 61 51 L 168
63 x 25 RDRTRD063C 38 19 33 33 74 34 L 270
63 x 32 RDRTRD063D 38 22 33 33 74 42 L 275
63 x 40 RDRTRD063E 38 26 33 33 74 51 L 277
63 x 50 RDRTRD063F 38 31 33 33 74 60 L 296
75 x 40 RDRTRD075E 45 26 39 39 90 51 L 465
75 x 50 RDRTRD075F 45 31 39 39 90 61 L 465
75 x 63 RDRTRD075G 45 38 39 39 90 74 L 478
90 x 50 RDRTRD090F 51 31 47 47 106 61 L 703
90 x 63 RDRTRD090G 51 39 47 47 106 75 L 713
90 x 75 RDRTRD090H 51 43 47 47 106 90 L 730
110 x 50 RDRTRD110F 61 31 56 56 130 61 L 1250
110 x 63 RDRTRD110G 61 34 56 56 130 75 L 1318
110 x 75 RDRTRD110H 61 44 56 56 130 90 L 1260
110 x 90 RDRTRD110I 61 51 56 56 130 106 L 1295
125 x 75 RDRTRD125H
125 x 90 RDRTRD125I 74 52 64 64 145 106 L
125 x 110 RDRTRD125L 74 63 64 64 145 130 L
140 x 90 RDRTRD140I 76 51 72 72 163 106 L
140 x 110 RDRTRD140L 76 61 72 72 163 103 L
140 x 125 RDRTRD140M L
160 x 90 RDRTRD160I 89 51 81 81 187 106 L 3750
160 x 110 RDRTRD160L 89 61 81 81 187 130 L 3800
160 x 140 RDRTRD160N 86 76 81 81 182 163 L 3940
160 x 125 RDRTRD160M 86 68 81 71 187 145
IIP - kiwa - NF - BSI
TRD
21
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
Full faced flange drilled to BS4504 NP10/16 plain / Flangia Fissa BS 4505 DIN 8063 PFA 10/16
d DN CodeCodice L Z E I f HOLES S Pack
ImballoWeight (GR)
Peso
20 25 RDRFFD0200 16 5 95 65 14 4 11 S 78
25 32 RDRFFD0250 19 5 105 75 14 4 12 S 105
32 40 RDRFFD0320 22 5 115 85 14 4 14 S 143
40 50 RDRFFD0400 26 5 142 100 18 4 15 M 220
50 63 RDRFFD0500 31 5 152 110 18 4 16 M 280
63 75 RDRFFD0630 38 5 165 125 18 4 18 M 380
75 90 RDRFFD0750 44 6 185 145 18 4 19 M 505
90 11 RDRFFD0900 51 7 200 160 18 8 20 M 685
110 125 RDRFFD1100 61 8 220 180 18 8 22 L 940
Blanking flange drilled to BS4504 NP10/16. / Flangia cieca BS 4505 DIN 8063 PFA 10/16
d DN CodeCodice E S I HOLES Pack
ImballoWeight (GR)
Peso
20 25 RDRFCD0200 95 11 65 4 S 76
25 32 RDRFCD0250 105 12 75 4 S 104
32 40 RDRFCD0320 115 14 85 4 S 140
40 50 RDRFCD0400 142 15 100 4 M 220
50 63 RDRFCD0500 152 16 110 4 M 280
63 75 RDRFCD0630 165 18 125 4 M 370
75 90 RDRFCD0750 185 19 145 4 M 495
90 11 RDRFCD0900 200 20 160 8 M 655
110 125 RDRFCD1100 220 22 180 8 M 850
125 RDRFCD1250 230 24 190 8 M 950
140 RDRFCD1400 250 26 210 8 M 1165
160 RDRFCD1600 285 28 240 8 L 1610
200 RDRFCD2000 340 30 295 8 L 2480
225 RDRFCD2250 340 30 295 8 L 2480
PVCu solvent cement fittings metric / Raccordi a incollaggio Metrici
Union plain. Available also with FMP o-rings on request. / Bocchettone con o’ring. Disponibile anche con guarnizione in FMP richiesta
Nominal SizeMisura nominale
CodeCodice L Z1 Z2 E Pack
ImballoWeight (GR)
Peso
16 RDRBOD0160 14 3 10 34 S 30
20 RDRBOD 0200 16 3 10 42 S 42
25 RDRBOD0250 19 3 10 52 M 70
32 RDRBOD0320 22 3 10 59 M 97
40 RDRBOD0400 26 3 12 72 M 115
50 RDRBOD0500 31 3 14 79 M 216
63 RDRBOD0630 38 3 18 96 M 350
75* RDRBOD0750 44 3 18 119 L 580
90* RDRBOD0900 51 5 18 134 L 760
110* RDRBOD1100 61 5 18 163 L 1340
Union with cap / Union 3 pièces avec Bouchon / Verschraubung 3 Stk. mit Kappe / Bocchettone con tappo / Unión con tapon
d CodeCodice L Z1 Z2 E Pack
ImballoWeight (GR)
Peso
20 RDRBOT0200 S
25 RDRBOT0250 M
32 RDRBOT0320 M
40 RDRBOT0400 M
50 RDRBOT0500 M
63 RDRBOT0630 M
BOD
BOT
FFD
FCD
22
PVCu solvent cement fittings metric / Raccordi a incollaggio Metrici
PVCu Backing Ring Drilled to BS4504 NP10/16 / Flangia libera BS4504 DIN 8063 PFA 10/16
d DN CodeCodice D E S l f Drill
N. Fori Bolts
Bulloni Pack Weight (GR)Peso
28 15 RDRFLD0200 20 95 11 65 14 4 M12x55 ImS
34 20 RDRFLD2500 25 105 12 75 14 4 M12x60 S 55
42 25 RDRFLD0320 32 115 14 85 14 4 M12x60 S 85
51 32 RDRFLD0400 40 142 15 100 18 4 M16x70 M 120
62 40 RDRFLD0500 50 152 16 110 18 4 M16x75 M 175
78 50 RDRFLD0630 63 165 18 125 18 4 M16x80 M 210
92 65 RDRFLD0750 75 185 19 145 18 4 M16x90 M 300
110 80 RDRFLD0900 90 200 20 160 18 8 M16x90 M 355
135 100 RDRFLD1100 110 220 22 180 18 8 M16x100 M 430
149 110 RDRFLD1250 125 230 24 190 18 8 M16x100 M
167 125 RDRFLD1400 140 250 26 210 18 8 M16x110 M 520
190 150 RDRFLD1600 160 285 28 240 22 8 M20x120 L 585
235 200 RDRFLD2000 200 340 30 295 22 8 M20x120 L 700
250 200 RDRFLD2250 225 340 30 295 22 8 M20x120 L 960
280 225 RDRFLD2500 250 395 34 350 22 12 M20x120 L 1230
309 250 RDRFLD2800 280 396 30 350 22 12 M20x120 L 1150
349 300 RDRFLD3150 315 449 31 400 22 12 M20x120 L
Stub flange (serrated face) plain / Collare per flange Rigato
Nominal SizeMisura nominale
CodeCodice L Z d E Pack
ImballoWeight (GR)
Peso
20 RDRQRD0200 16 3 27 34 S 10
25 RDRQRD0250 19,5 3,5 32 41 S 16
32 RDRQRD0320 22,5 3,5 41 50 S 25
40 RDRQRD0400 26 3 50 61 M 41
50 RDRQRD0500 32 3,5 61 73 M 60
63 RDRQRD0630 38,5 4 76 90 M 105
75 RDRQRD0750 44 4 90 106 L 160
90 RDRQRD0900 53 3,5 107 125 L 280
110 RDRQRD1100 62 4 130 149 L 445
125 RDRQRD1250 70 5 146 168 L 540
140 RDRQRD1400 77 8 165 188 L 740
160 RDRQRD1600 87 6 185 214 L 1000
200* RDRQRD2000 106 7 232 254 L 2000
225* RDRQRD2250 119 8 248 274 L 1700
250* RDRQRD2500 131 8 271 305 L 2300
280* RDRQRD2800 147 15 307 325 L 3650
315* RDRQRD3150 165 16 346 377 L 4950
FLD
QRD
1
1
2
2
A A
B B
SHEET
Edition "A"
Area:
Part Number: RDRFLDXX
Polypipe Italia S.r.l.Loc. Pianmercato 5C/5D16044 Monleone di Cicagna (GE)ItalyTel. 0039 0185 92399 r.a.Fax 0039 0185 92699www.polypipeitalia.com
PPPPoooollllyyyyppppiiiippppeeee IIIIttttaaaalllliiiiaaaa
All dimensions inmm unlessotherwise specificied
Designed dy:
Technical Dep.
Toll No:
1Drown Date:
01/2014Scale:
This information is for guidance purposes only and mustnot be reproduced in whole or in part without thepermission of Polypipe Italia.Note: The copyright in this drawing is the property ofPolypipe Italia, and neither the drawing nor any art ofit, nor any information contained therin, shall bereproduced or dislclosed to any third party other than forthe purpose of the use of Polypipe Italia. Copyright2011 Polypipe. All rights reserved.
Projection - third angleunless specified otherwise
WeigHt: (gr)
EFFAST
EI
F
S
23
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
PVCu solvent cement fittings metric / Raccordi a incollaggio Metrici
Flat Gaskets for Stub Flanges / Guarnizione Piana per QRD, FFD, FCD
Inches mm CodeCodice E S Weight (GR)
Peso
1/2" 20 RGRGQP0200 29 2 20
3/4" 24 RGRGQP0250 35 2 21
1" 29 RGRGQP0320 44 2 26
11/4" 40 RGRGQP0400 58 2 29
11/2" 50 RGRGQP0500 70 2 34
2" 63 RGRGQP0630 90 3 35
21/2" 75 RGRGQP0750 106 3 38
3" 90 RGRGQP0900 125 3 40
4" 110 RGRGQP1100 150 4 43
5” 125 RGRGQP1250 168 4 47
5" 140 RGRGQP1400 188 4 59
6" 160 RGRGQP1600 213 4 73
8” 200 RGRGQP2000 254 4 80
8" 225 RGRGQP2250 274 4 88
10” 250 RGRGQP2500
12” 315 RGRGQP3150
Hose Adaptor Male Solvent Cement/ Portagomma maschio a incollaggio
Nominal SizeMisura nominale
CodeCodice L H O Pack
ImballoWeight (GR)
Peso
16 x 16 x 18 RDRPGD0160 14 66 19 S 14
20 x 20 x 22 RDRPGD0200 16 70 24 S 20
25 x 25 x 27 RDRPGD0250 19 79 30 S 30
32 x 30 x 32 RDRPGD0320 22 83 36 M 47
40 x 40 x 42 RDRPGD0400 26 96 46 L 72
50 x 50 x 52 RDRPGD0500 31 108 55 L 135
63 x 63 x 64 RDRPGD0630 38 130 65 M 208
Reducing bush plain Male/Female / Riduzione Maschio/Femmina Corta
Nominal SizeMisura nominale
CodeCodice L1 L2 Z Pack
ImballoWeight (GR)
Peso
A B
20 x 16 RDRRCD020A 16 14 2 S 3
25 x 16 RDRRCD025A 19 14 2,5 S 10
25 x 20 RDRRCD025B 19 16 3 S 6
32 x 16 RDRRCD032A 22 14 8 S 15
32 x 20 RDRRCD032B 22 16 5 S 15
32 x 25 - RDRRCD032C 22 19 3 S 10
40 x 20 RDRRCD040B 26 16 10 S 25
40 x 25 RDRRCD040C 26 19 8 S 30
IIP - kiwa - NF - BSI
PGD
GQPEPDM
RCD
24
PVCu solvent cement fittings metric / Raccordi a incollaggio Metrici
Reducing bush plain Male/Female / Riduzione Maschio/Femmina Corta
Nominal SizeMisura nominale
CodeCodice L1 L2 Z Pack
ImballoWeight (GR)
Peso
A B
40 x 32 - RDRRCD040D 26 22 4 S 16
50 x 25 RDRRCD050C 31 19 12 S 45
50 x 32 RDRRCD050D 31 22 8 S 40
50 x 40 - RDRRCD050E 31 26 6 S 30
63 x 32 - RDRRCD063D 39 22 6 M 83
63 x 40 - RDRRCD063E 39 26 11 M 78
63 x 50 - RDRRCD063F 39 31 6 M 62
75 x 40 - RDRRCD075E 44 26 18 M 120
75 x 50 - RDRRCD075F 44 31 13 M 122
75 x 63 - RDRRCD075G 44 38 6 M 80
90 x 50 - RDRRCD090F 51 31 20 M 210
90 x 63 - RDRRCD090G 53 38 15 M 195
90 x 75 - RDRRCD090H 53 44 8 M 140
110 x 63 - RDRRCD110G 63 38 23 M 372
110 x 75 - RDRRCD110H 61 44 17 M 370
110 x 90 - RDRRCD110I 61 51 9 M 275
125 x 75 - RDRRCD125H 70 44 24 L 412
125 x 90 - RDRRCD125I 70 51 18 L 450
125 x 110 - RDRRCD125L 70 61 7 L 260
140 x 90 - RDRRCD140I 77 51 25 L 550
140 x 110 - RDRRCD140L 77 61 14 L 510
140 x 125 - RDRRCD140M 77 69 7 L 320
160 x 90 - RDRRCD160I 89 61 32 L 820
160 x 110 - RDRRCD160L 89 61 26 L 820
160 x 125 - RDRRCD160M 89 69 17 L 725
160 x 140 - RDRRCD160N 89 76 11 L 555
200 x 160* RDRRCD200O 107 86 21 L 710
225 x 160* RDRRCD225O 120 86 34 L 1700
225 x 200* RDRRCD225Q 120 106 14 L 1360
250 x 160* RDRRCD250O 132 87 45 L 3050
250 x 200* RDRRCD250Q 135 97 28 L 3500
250 x 225* RDRRCD250R 135 107 14 L 2150
280 x 225* RDRRCD280R 148 119 28 L 2630
280 x 250 RDRRCD280S 148 119 15 L 2630
315 x 200* RDRRCD315Q 166 107 59 L 8650
315 x 225* RDRRCD315R 166 120 45 L 8100
315 x 250* RDRRCD315S 166 132 18 L 5080
IIP - kiwa - NF - BSI
RCD
25
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
PVCu adaptor fittings metric / PVCu Raccordi e Adattatori metrici Filettati
Elbow 90°plain/BSP female threaded / Raccordo a gomito 90° incollaggio/Filettato Femmina
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z1 Z2 E Pack
ImballoWeight (GR)
Peso
16 x 3/8" RGRGOG016A 14 11 9 12 23 S 13
20 x 1/2" RGRGOG020B 16 15 11 12 28 S 20
25 x 3/4" RGRGOG025C 19 16 14 17 34 M 35
32 x 1" RGRGOG032D 22 19 17 20 42 M 56
40 x 11/4" RGRGOG040E 26 21 21 26 51 M 90
50 x 11/2" RGRGOG050F 31 21 26 36 61 L 155
63 x 2" RGRGOG063G 38 26 33 45 75 L 265
75 x 21/2" RGRGOG075H 44 30 39 53 89 L 400
90 x 3" RGRGOG090I 51 33 47 65 106 L 670
110 x 4" RGRGOG110L 61 39 57 79 129 L 1055
Tee 90° plain/BSP female threaded branch / Raccordo a T 90° Incollaggio/bocca centrale Filettata Femmina
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z1 Z2 E Pack
ImballoWeight (GR)
Peso
16 x 3/8" RGRTIG016A 14 11 9 12 23 S 17
20 x 1/2" RGRTIG020B 16 15 11 12 28 M 30
25 x 3/4" RGRTIG025C 19 16 14 17 34 M 45
32 x 1" RGRTIG032D 22 19 17 20 42 M 75
40 x 11/4" RGRTIG040E 26 21 21 26 51 M 120
50 x 11/2" RGRTIG050F 31 21 26 36 61 L 195
63 x 2" RGRTIG063G 38 26 33 45 75 L 335
75 x 21/2" RGRTIG075H 44 30 39 53 89 L 505
90 x 3" RGRTIG090L 51 33 47 65 106 L 810
110 x 4" RGRTIG110L 61 39 57 79 129 L 1325
Socket plain/BSP female threaded / Manicotto incollaggio/Filettatura Femmina
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z E Pack
ImballoWeight (GR)
Peso
16 x 3/8” RGRMAG016A 14 11 6 23 S 9
20 x 1/2" RGRMAG020B 17 15 4 28 S 18
25 x 3/4" RGRMAG025C 20 16 6 34 M 25
32 x 1" RGRMAG032D 23 19 7 42 M 38
40 x 11/4" RGRMAG040E 28 21 7 51 M 60
50 x 11/2" RGRMAG050F 32 21 7 61 M 95
63 x 2" RGRMAG063G 39 26 7 75 M 165
75 x 21/2" RGRMAG075H 44 30 8 89 M 215
90 x 3" RGRMAG090I 51 33 9 106 M 340
110 x 4" RGRMAG110L 61 39 10 129 L 550
GOG
TIG
MAG
26
PVCu adaptor fittings metric / PVCu Raccordi e Adattatori metrici Filettati
Union plain/BSP female threaded. Available also with FMP o-rings on request / Bocchettone con o’ring incollaggio/Filettato Femmina. Disponibile anche con guarnizione in FMP A richiesta
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z1 Z2 F E Pack
ImballoWeight (GR)
Peso
16 x 3/8" RGRBOG016A 14 11 3 14 3/4" 34 S 30
20 x 1/2" RGRBOG020B 16 15 3 11 1" 42 S 42
25 x 3/4" RGRBOG025C 19 16 3 13 11/4" 52 M 70
32 x 1" RGRBOG032D 22 19 3 13 11/2" 59 M 95
40 x 11/4" RGRBOG040E 26 21 3 17 2" 72 M 155
50 x 11/2" RGRBOG050F 31 21 3 24 21/4" 79 M 240
63 x 2" RGRBOG063G 38 26 3 30 23/4" 96 M 405
75 x 21/2"* RGRBOG075H 44 30 3 32 31/2" 119 L 625
90 x 3"* RGRBOG090I 51 33 5 36 4" 134 L 865
110 x 4"* RGRBOG110L 61 39 5 40 5" 163 L 1340
Spigot plain/BSP female threaded / Adattatore Incollaggio/Filettatura Femmina
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 E Z Pack
ImballoWeight (GR)
Peso
16 x 3/8" RGRAFG016A 14 12 23 22 S 16
20 x 1/2" RGRAFG020B 16 15 28 24 S 20
20 x 3/4" RGRAFG020C 16 16 34 24 S 25
25 x 1/2" RGRAFG025B 19 15 28 27 M 20
25 x 3/4" RGRAFG025C 19 16 34 27 M 25
25 x 1" RGRAFG025D 19 19 42 27 M 40
32 x 3/4" RGRAFG032C 22 16 34 30 M 32
32 x 1" RGRAFG032D 22 19 42 30 M 43
40 x 1" RGRAFG040D 26 19 42 36 M 50
40 x 11/4" RGRAFG040E 26 21 51 36 M 65
50 x 11/4” RGRAFG050E 31 21 55 41 M 78
50 x 11/2" RGRAFG050F 31 21 58 41 M 73
50 x 2" RGRAFG050G 31 26 72 41 M 80
63 x 2" RGRAFG063G 38 26 72 48 M 135
75 x 2" RGRAFG075G 44 26 72 53 M 175
75 x 21/2" RGRAFG075H 44 30 89 58 L 225
75 x 3" RGRAFG075I 44 33 103 58 M 295
90 x 21/2" RGRAFG090H 51 30 89 65 L 275
90 x 3" RGRAFG090I 51 33 103 65 L 310
90 x 4" RGRAFG090L 51 39 130 65 L 450
110 x 3" RGRAFG110I 61 33 103 76 L 440
110 x 4" RGRAFG110L 61 39 130 76 L 480
BOG
AFG
27
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
PVCu adaptor fittings metric / Adattatore Incollaggio/Filettatura Maschio
Socket or spigot plain/BSP male threaded / Adattatore Incollaggio/Filettatura Maschio
d x D x R (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 L3 H O Pack
ImballoWeight (GR)
Peso
12 x 16 x 3/8" RGRAMG012A 12 14 11 36 22 S 6
16 x 20 x 3/8" RGRAMG016A 14 16 11 40 24 S 10
16 x 20 x 1/2" RGRAMG016B 14 16 15 43 24 S 11
20 x 25 x 3/8" RGRAMG020A 16 19 11 43 30 S 15
20 x 25 x 1/2" RGRAMG020B 16 19 15 46 30 S 16
20 x 25 x 3/4" RGRAMG020C 16 19 16 47 30 S 18
25 x 32 x 1/2" RGRAMG025B 19 22 15 49 36 M 25
25 x 32 x 3/4" RGRAMG025C 19 22 16 50 36 M 26
25 x 32 x 1" RGRAMG025D 19 22 19 53 36 M 28
32 x 40 x 3/4" RGRAMG032C 22 26 16 54 46 M 42
32 x 40 x 1/2” RGRAMG032C 22 26 15 53 46 M 39
32 x 40 x 1" RGRAMG032D 22 26 19 57 46 M 42
32 x 40 x 11/4" RGRAMG032E 22 26 21 60 46 M 45
40 x 50 x 1" RGRAMG040D 26 31 19 64 55 M 71
40 x 50 x 11/4" RGRAMG040E 26 31 21 67 55 M 72
40 x 50 x 11/2" RGRAMG040F 26 31 21 67 55 M 70
50 x 63 x 11/4" RGRAMG050E 31 38 21 74 65 M 115
50 x 63 x 11/2" RGRAMG050F 31 38 21 74 65 M 113
50 x 63 x 2" RGRAMG050G 31 38 26 78 65 M 120
63 x 75 x 11/2" RGRAMG063F 38 44 21 80 80 M 182
63 x 75 x 2" RGRAMG063G 38 44 26 84 80 M 181
63 x 75 x 21/2" RGRAMG063H 38 44 30 91 80 L 188
75 x 90 x 2" RGRAMG075G 44 52 26 94 95 M 270
75 x 90 x 21/2" RGRAMG075H 44 52 30 99 95 M 280
75 x 90 x 3" RGRAMG075I 44 52 33 102 95 L 292
90 x 110 x 21/2" RGRAMG090H 51 61 30 110 115 L 470
90 x 110 x 3" RGRAMG090I 51 61 33 113 115 L 483
90 x 110 x 4" RGRAMG090L 51 61 39 118 115 L 485
110 x 125 x 3" RGRAMG110I 61 66 33 115 130 L 475
110 x 125 x 4" RGRAMG110L 61 66 39 120 130 L 500
110 x 125 x 5” RGRAMG110M 61 66 39 120 130 L 510
Adaptor Male Threaded / Adattatore Incollaggio/Filettatura Maschio
d x R (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 L3 H O Pack
ImballoWeight (GR)
Peso
90 x 3” RGRADG090I 44 51 33 97 115 L 330
110 x 4” RGRADG110L 51 61 39 108 130 L 520
160 x 6” RGRADG160O 86 48 146 L 1333
AMG
ADG
28
ADG
PVCu adaptor fittings metric / PVCu Raccordi e Adattatori metrici Filettati
Adaptor bush / Riduzione di Passaggio
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L Z L1 Pack
ImballoWeight (GR)
Peso
25 x 1/2” RGRRCG025B 19 4 15 S 8
32 x 3/4” RGRRCG032C 22 5,7 16,3 S 10
40 x 1” RGRRCG040D 26 6,9 19,1 S 17
50 x 1 1/4” RGRRCG050E 31 9,6 21,4 M 30
63 x 1 1/2” RGRRCG063F 38 16,6 21,4 M 72
75 x 2” RGRRCG075G 44 18,3 25,7 M 105
90 x 2 1/2” RGRRCG090H 51 20,8 30,2 M 154
110 x 3” RGRRCG110I 61 27,7 33,3 M 300
Adaptor Union Socket Plain / Bocchettone Incollaggio Femmina/Filettato Maschio
d x R (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 E F Z O-ring Pack
ImballoWeight (GR)
Peso
50 x 1 1/2” RGRBMGO50F 31 21,4 7,9 2 1/4 3 6187 L 330
50 x 2” RGRBMG050G 31 25,7 7,9 2 1/4 3 6187 L 520
63 x 2” RGRBMG063G 38 25,7 9,6 2 3/4 3 6237 L 1333
Adaptor plain/ brass male threaded / Adattatore Incollaggio /raccordo Ottone Filettato Maschio
d x R (EN UNI 10226)Nominal SizeMisura nominale
CodeCodicee E L1 Z1 Pack
ImballoWeight (GR)
Peso
20 x 1/2” RGRBNG020B 27,5 57,5 3 S 190
25 x 3/4” RGRBNG025C 36 68,5 3 M 242
32 x 1” RGRBNG032D 41,5 71,5 3 M 324
40 x 1 1/4” RGRBNG040E 53 85,5 3 M 480
50 x 1 1/2” RGRBNG050F 59 91,5 3 M 645
63 x 2” RGRBNG063G 74 109 3 M 1010
75 x 2 1/2” RGRBNG075H 92,5 126,5 3 L 1550
90 x 3” RGRBNG090I 105 138,5 5 L 2140
Adaptor plain/brass female threaded / Adattatore Incollaggio/ Raccordo Ottone Filettato Femmina
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice E L1 Z1 Z2 Pack
ImballoWeight (GR)
Peso
20 x 1/2” RGRBBG020B 27,5 44,5 3 8 S 172
25 x 3/4” RGRBBG025C 36 49 3 8 M 210
32 x 1” RGRBBG032D 41,5 52 3 8 M 280
40 x 1 1/4” RGRBBG040E 53 60 3 8 M 400
50 x 1 1/2” RGRBBG050F 59 68 3 9 M 490
63 x 2” RGRBBG063G 74 81 3 10 M 820
75 x 2 1/2” RGRBBG075H 92,5 94 3 16 L 1340
90 x 3” RGRBBG090I 105 103 5 14 L 1650
40 x 11/4" RGRGOR040E 53 60 3 8 M 106
50 x 11/2" RGRGOR050F 59 68 3 9 L 175
63 x 2" RGRGOR063G 74 81 3 10 L 289
RCG
BMG
BNG
BBG
29
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
PVCu adaptor fittings metric / PVCu Raccordi e Adattatori metrici Filettati
Elbow 90° Plain/BSP Female with Stainless Reinforcing Ring / Raccordo a Gomito 90° Incollaggio/Filettato Femmina con anello di rinforzo in acciaio Inox
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z1 Z2 E Pack
ImballoWeight (GR)
Peso
20 x 1/2" RGRGOR020B 16 15 11 12 28 S 24
25 x 3/4" RGRGOR025C 19 16 14 17 34 M 43
32 x 1" RGRGOR032D 22 19 17 20 42 M 72
40 x 11/4" RGRGOR040E 26 21 21 26 51 M 106
50 x 11/2" RGRGOR050F 31 21 26 36 61 L 175
63 x 2" RGRGOR063G 38 26 33 45 75 L 289
GOR
Tee 90° plain/BSP female threaded branch with stainless steel reinforcing ring / Raccordo a T 90° Incollaggio/Bocca Centrale Filettata Femmina con anello di rinforzo in acciaio Inoxd x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z1 Z2 E Pack
ImballoWeight (GR)
Peso
20 x 1/2" RGRTIR020B 16 15 11 12 28 M 34
25 x 3/4" RGRTIR025C 19 16 14 17 34 M 53
32 x 1" RGRTIR032D 22 19 17 20 42 M 87
40 x 11/4" RGRTIR040E 27 21 21 26 51 M 136
50 x 11/2" RGRTIR050F 32 21 26 36 61 L 215
63 x 2" RGRTIR063G 39 26 33 45 75 L 359
Socket plain/BSP female threaded with stainless steel reinforcing ring / Manicotto Incollaggio/Filettato Femmina con anello di rinforzo in Acciaio Inox
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z E Pack
ImballoWeight (GR)
Peso
20 x 1/2" RGRMAR020B 16 15 4 28 S 22
25 x 3/4" RGRMAR025C 19 16 6 34 M 33
32 x 1" RGRMAR032D 22 19 6 42 M 50
40 x 11/4" RGRMAR040E 27 21 8 51 M 76
50 x 11/2" RGRMAR050F 32 21 13 61 M 115
63 x 2" RGRMAR063G 39 26 15 75 M 189
Spigot plain/BSP female threaded with stainless steel reinforcing ring / Adattatore Incollaggio/ Filettato Femmina con anello di rinforzo in Acciaio Inox
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 E Z Pack
ImballoWeight (GR)
Peso
20 x 1/2" RGRAFR020B 16 15 28 24 S 24
20 x 3/4 RGRAFR020C S
25 x 1/2 RGRAFR025B M
25 x 3/4" RGRAFR025C 19 16 34 27 M 33
25 x 1 RGRAFR025D M
32 x 3/4 RGRAFR032C M
32 x 1" RGRAFR032D 22 19 42 30 M 55
40 x 1 RGRAFR040D M
40 x 11/4" RGRAFR040E 27 21 51 36 M 81
50 x 11/4 RGRAFR050E M
TIR
MAR
AFR
30
CAA
PVCu solvent cement fittings / PVCu Raccordi British Standard
Elbow 90° plain BS / Gomito a 90° BS
Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
3/8" RARGOA0160 15 9 23 S 13
1/2" RARGOA0200 17 11 27 S 20
3/4" RARGOA0250 20 14 33 M 35
1" - RARGOA0320 23 17 41 M 60
11/4" RARGOA0400 27 23 51 M 90
11/2" - RARGOA0500 31 28 61 L 135
2" - RARGOA0630 38 34 75 L 220
21/2" RARGOA0750 44 40 89 L 375
3" - RARGOA0900 52 48 106 L 600
4" - RARGOA1100 63 58 133 L 1060
5" - RARGOA1400 76 72 164 L 2000
6" - RARGOA1600 90 81 198 L 3200
8"* RARGOA2250 119 115 258 L 7500
Elbow 45° plain BS / Gomito a 45° BS
Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
3/8" RARGYA0160 15 6 23 S 10
1/2" RARGYA0200 17 5 27 S 17
3/4" RARGYA0250 20 6 33 M 30
1" - RARGYA0320 23 8 41 M 47
11/4" RARGYA0400 27 10 50 M 77
11/2" - RARGYA0500 31 12 61 M 115
2" - RARGYA0630 38 15 75 L 154
21/2" RARGYA0750 44 18 89 L 310
3" - RARGYA0900 52 21 106 L 485
4" - RARGYA1100 63 25 133 L 835
5" RARGYA1400 76 32 164 L 1640
6" - RARGYA1600 90 36 198 L 2100
8"* RARGYA2250 119 49 258 L 6200
Bend 90° short radius plain BS / Curva a 90° BS
Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
1/2" RARCUA0200 17 39 27 300 30
3/4" RARCUA0250 20 49 33 150 50
1" RARCUA0320 23 63 41 100 92
11/4" RARCUA0400 27 80 50 50 165
11/2" RARCUA0500 31 100 61 60 270
2" RARCUA0630 38 126 76 30 490
21/2" RARCUA0750 44 150 90 20 990
3" RARCUA0900 51 180 110 12 1600
4" RARCUA1100 63 220 133 6 2150
Socket plain BS / Manicotto BS
Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
3/8” RARMAA0160 15 3 23 S 9
1/2" RARMAA0200 17 3 27 S 15
3/4" RARMAA0250 20 3 33 M 23
1" - RARMAA0320 23 3 41 M 36
11/4" RARMAA0400 27 3 50 M 60
11/2" - RARMAA0500 31 3 61 L 85
2" - RARMAA0630 38 3 76 L 145
21/2" RARMAA0750 44 4 90 L 222
3" - RARMAA0900 51 5 110 L 353
4" - RARMAA1100 63 6 133 L 605
5" RARMAA1400 76 8 161 L 1100
6" - RARMAA1600 90 8 198 L 1400
8"* RARMAA2250 119 11 258 L 4100
# Refer to metric equivalent - IIP - kiwa - NF - BSI
GOA
GYA
CUA
MAA
31
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
PVCu solvent cement fittings / PVCu Raccordi British Standard
Tee 90° plain BS / Raccordo a T 90° BS
Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
3/8" RARTIA0160 15 9 24 S 15
1/2" RARTIA0200 17 11 28 M 25
3/4" RARTIA0250 20 14 34 M 44
1" - RARTIA0320 23 17 42 M 75
11/4" RARTIA0400 27 21 51 M 120
11/2" - RARTIA0500 31 26 61 L 172
2" - RARTIA0630 38 33 75 L 363
21/2" RARTIA0750 44 39 89 L 495
3" - RARTIA0900 52 47 106 L 790
4" - RARTIA1100 63 57 133 L 1330
5" RARTIA1400 76 71 163 L 2550
6" - RARTIA1600 90 81 198 L 4100
8"* RARTIA2250 119 114 258 L 9700
Cap plain BS / Calotta BS
Nominal SizeMisura nominale
CodeCodice L H E Pack
ImballoWeight (GR)
Peso
3/8" RARCAA0160 15 26 23 S 7
1/2" RARCAA0200 17 30 27 S 10
3/4" RARCAA0250 20 34 33 S 18
1" RARCAA0320 23 38 42 M 30
11/4" RARCAA0400 27 43 50 M 45
11/2" RARCAA0500 31 48 61 M 65
2" RARCAA0630 38 56 75 M 110
21/2" RARCAA0750 44 67 89 M 208
3" RARCAA0900 52 78 106 L 325
4" RARCAA1100 63 81 133 L 500
5" RARCAA1400 76 114 162 L 920
6" RARCAA1600 90 127 198 L 1120
8"* RARCAA2250 119 165 255 L 2978
Reducing bush plain BS / Riduzione Corta Maschio Femmina BS
Nominal SizeMisura nominale
CodeCodice L1 L2 Z FIG Pack
ImballoWeight (GR)
Peso
1/2" x 3/8" RARRCA020A 17 15 2 A S 3
3/4" x 1/2" RARRCA025B 20 17 3 A S 6
1" x 1/2" RARRCA032B 23 17 6 B S 15
1" x 3/4" RARRCA032C 23 20 3 A S 10
11/4" x 1" RARRCA040D 27 23 4 A S 16
11/2" x 3/4" RARRCA050C 31 20 12 B M 45
11/2" x 1" RARRCA050D 31 23 9 B M 40
11/2" x 11/4" RARRCA050E 31 27 5 A M 30
2" x 1" RARRCA063D 38 23 16 B M 83
2" x 11/4" RARRCA063E 38 27 12 B M 78
2" x 11/2" RARRCA063F 38 31 7 A M 61
21/2" x 11/2" RARRCA075F 44 31 13 B M 122
21/2" x 2" RARRCA075G 44 38 6 A M 94
3" x 11/2" RARRCA090F 52 31 20 B M 210
3" x 2" RARRCA090G 52 38 13 B M 195
3" x 21/2" RARRCA090H 52 44 7 A M 140
4" x 2" RARRCA110G 63 38 23 B M 372
4" x 3" RARRCA110I 63 52 10 A M 275
5" x 4" RARRCA140L 76 63 15 B L 510
6" x 4" RARRCA160L 90 63 25 B L 830
8" x 6"* RARRCA225O 119 90 33 B L 1700
# Refer to metric equivalent - IIP - kiwa - NF - BSI
TIA
CAA
RCA
32
PVCu solvent cement fittings / PVCu Raccordi British Standard
Nominal SizeMisura nominale
CodeCodice L Z1 Z2 F E Pack
ImballoWeight (GR)
Peso
3/8" RARBOA0160 15 3 10 3/4" 34 S 30
1/2" RARBOA0200 17 3 10 1" 42 S 42
3/4" RARBOA0250 20 3 10 11/4" 52 M 70
1" RARBOA0320 23 3 10 11/2" 59 M 97
11/4" RARBOA0400 27 3 12 2" 72 M 115
11/2" RARBOA0500 31 3 14 21/4" 79 L 216
2" RARBOA0630 38 3 18 23/4" 96 L 350
21/2"* RARBOA0750 44 3 18 31/2" 119 L 580
3"* RARBOA0900 52 5 18 4" 134 L 760
4"* RARBOA1100 63 5 18 5" 163 L 1340
Stub flange (serrated face) plain BS / Collare per flange Rigato BS
Nominal SizeMisura nominale
CodeCodice L Z d S E Pack
ImballoWeight (GR)
Peso
1/2" RARQRA0200 17 3 27 6 34 S 10
3/4" RARQRA0250 20 3 33 7 41 S 16
1" RARQRA0320 23 3 41 7 50 S 25
11/4" RARQRA0400 27 3 50 8 61 M 40
11/2" RARQRA0500 32 3 61 8 73 M 60
2" RARQRA0630 39 3 76 9 90 M 105
21/2" RARQRA0750 44 3 90 10 106 L 160
3" RARQRA0900 52 5 108 11 125 L 280
4" RARQRA1100 63 5 133 12 150 L 445
5" RARQRA1400 76 6 165 13 188 L 740
6" RARQRA1600 90 7 193 13 218 L 1000
8"* RARQRA2250 119 7 248 19 274 L 1700
# Refer to metric equivalent
PVCu full face flanges (drilled) / PVCu Flange Forate
Drilled to BS 10 table D&E plain BS / Foratura BS 10 tavola D&E BS
Nominal SizeMisura nominale
CodeCodice L Z E f I S HOLES Pack
ImballoWeight (GR)
Peso
1/2" RARFFA0200 17 5 95 14 67 11 4 S 78
3/4" RARFFA0250 20 5 105 14 73 12 4 S 105
1" RARFFA0320 23 5 115 14 83 14 4 S 143
11/2" RARFFA0500 32 5 152 18 98 16 4 M 280
2" RARFFA0630 38 5 165 18 115 18 4 M 380
3" RARFFA0900 51 7 200 18 146 20 8 M 685
4" RARFFA1100 63 8 220 18 178 22 8 L 940
# Refer to metric equivalent
BOA
QRA
FFA
Union plain BS. Unions up to 2” 15 bar (20°C), above 2” 10 bar (20°C) / Bocchettone BS con o’ring BS (PFA 15 bar fino a 2”, 10 bar fino a 4” a 20°C)
33
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
PVCu full face flanges (drilled) / PVCu Flange Forate
Drilled to BS 4504 NP10/16 plain BS / Foratura BS4505 PFA 10/16 BS
Nominal SizeMisura nominale
CodeCodice L Z E f I S HOLES Pack
ImballoWeight (GR)
Peso
1/2" RARFNA0200 17 5 95 14 65 8 4 S 78
3/4" RARFNA0250 20 5 105 14 75 9 4 S 105
1" RARFNA0320 23 5 115 14 85 16 4 S 143
11/4" RARFNA0400 27 5 142 18 100 17 4 M 220
11/2" RARFNA0500 32 5 152 18 110 17 4 M 280
2" RARFNA0630 38 5 165 18 125 20 4 M 380
21/2" RARFNA0750 44 6 185 18 145 19 4 M 505
3" RARFNA0900 51 7 200 18 160 22 8 M 685
4" RARFNA1100 63 8 220 18 180 23 8 L 940
# Refer to metric equivalent
PVCu adaptor fittings / PVCu Raccordi di passaggio
Elbow 90° plain BS threaded female / Raccordo Gomito 90° incollaggio BS/Filettatura Femmina
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z1 Z2 E Pack
ImballoWeight (GR)
Peso
1/2"x1/2” RCRGOC020B 17 15 11 12 28 S 20
3/4" x 3/4” RCRGOC025C 20 16 14 17 34 M 35
1" x 1” RCRGOC032D 23 19 17 20 42 M 60
11/4" x 11/4” RCRGOC040E 27 21 21 26 51 M 90
11/2" x 11/2” RCRGOC050F 32 21 26 36 61 L 155
2" x 2” RCRGOC063G 39 26 33 46 75 L 265
21/2" x 21/2” RCRGOC075H 44 30 39 53 89 L 400
3" x 3” RCRGOC090I 52 33 47 65 106 L 670
4” x 4” RCRGOC110L L 1055
Adaptor socket plain BS/Metric / Manicotto BS/metrico
d x d Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
1/2" x 20 RBRMAB020B 16 3 27 S 16
3/4" x 25 RBRMAB025C 19 3 33 M 25
1" x 32 RBRMAB032D 22 3 41 M 39
11/4" x 40 RBRMAB040E 27 3 52 M 53
11/2" x 50 RBRMAB050F 32 3 61 L 101
2" x 63 RBRMAB063G 39 3 75 L 178
3" x 90 RBRMAB090I 52 5 10 L 381
4" x 110 RBRMAB110L 67 6 133 L 750
6" x 160 RBRMAB160O 89 8 198 L 1695
FNA
GOC
MAB
34
PVCu adaptor fittings / PVCu Raccordi di passaggio
Tee 90° plain/BSP female threaded BS/Metric / Raccordo T 90° Incollaggio BS/Bocca centrale Filettatura Femmina
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z1 Z2 E Pack
ImballoWeight (GR)
Peso
1/2" x 1/2” RCRTIC020B 17 15 11 12 28 M 30
3/4" x 3/4” RCRTIC025C 19 16 14 17 34 M 45
1" x 1” RCRTIC032D 23 19 17 20 42 M 75
11/4" x 11/4” RCRTIC040E 27 21 21 26 51 M 120
11/2" x 11/2” RCRTIC050F 32 21 26 36 61 L 195
2" x 2” RCRTIC063G 39 26 33 46 75 L 335
21/2" x 21/2” RCRTIC075H 44 30 39 53 89 L 505
3" x 3” RCRTIC090I 52 33 47 65 106 L 810
4” x 4” RCRTIC110L L 1325
Socket plain/BSP female threaded BS/Metric / Manicotto incollaggio BS/Filettatura Femmina
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z E Pack
ImballoWeight (GR)
Peso
1/2" x 1/2” RCRMAC020B 17 15 4 28 S 18
3/4" x 3/4” RCRMAC025C 20 16 6 34 M 25
1" x 1” RCRMAC032D 23 19 7 42 M 38
11/4" x 11/4” RCRMAC040E 27 21 7 51 M 60
11/2" x 11/2” RCRMAC050F 32 21 7 61 M 95
2" x 2” RCRMAC063G 39 26 7 75 M 165
21/2" x 21/2” RCRMAC075H 44 30 8 89 M 215
3" x 3” RCRMAC090I 52 33 9 106 L 340
4" x 4” RCRMAC110L 63 39 10 133 L 550
Spigot plain/BSP female threaded BS/Metric / Adattatore incollaggio BS/Filettatura Femmina
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 E Z Pack
ImballoWeight (GR)
Peso
1/2" x 1/2” RCRAFC020B 17 15 28 24 S 20
3/4" x 3/4” RCRAFC025C 20 16 34 27 M 25
1" x 1” RCRAFC032D 23 19 42 30 M 43
11/4" x 11/4” RCRAFC040E 27 21 51 36 M 65
11/2" x 11/2” RCRAFC050F 32 21 58 41 M 73
2" x 2” RCRAFC063G 39 26 72 48 M 135
21/2" x 21/2” RCRAFC075H 44 30 89 58 L 225
Socket plain/BSP male threaded BS/Metric / Adattatore incollaggio BS/ Filettatura Maschio
D x d x R (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 L3 H O Pack
ImballoWeight (GR)
Peso
1/2" x 3/4” x 1/2” RCRAMC020B 17 20 15 46 30 S 15
3/4" x 1” x 3/4” RCRAMC025C 20 23 16 50 36 M 26
1" x 11/4” x 1” RCRAMC032D 23 27 19 57 46 M 40
11/4" x 11/2”x 11/4” RCRAMC040E 27 32 21 67 55 M 75
11/2" x 2” x 11/2” RCRAMC050F 32 39 21 74 65 M 113
2" x 21/2” x 2” RCRAMC063G 39 44 26 84 80 M 150
21/2" x 3”x 21/2” RCRAMC075H 44 52 30 99 95 M 270
3" x 4”x 3” RCRAMC090I 52 63 33 113 115 L 475
4" x 5”x 4” RCRAMC110L 63 66 39 120 130 L 500
TIC
MAC
AFC
AMC
35
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
PVCu adaptor fittings / PVCu Raccordi di passaggio
Union plain/BSP female threaded BS/Metric. Unions up to 2" 15 bar (20°C). / Bocchettone con o’ring incollaggio BS/ filettatura Femmina* Maximum working pressure: 10 bar (145 psi) at 20°C *PFA 15 fino a 2” - PFA: 10 bar (145 PSI) a 20°C. Supplied with EPDM O ring–for FPM O ring see Accessories section Forniti con o’ring EPDM. FPM a richiesta.
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z1 Z2 F E Pack
ImballoWeight (GR)
Peso
1/2" x 1/2” RCRBOC020B 17 15 3 11 1" 42 S 42
3/4" x 3/4” RCRBOC025C 20 16 3 13 11/4" 52 M 70
1" x 1” RCRBOC032D 23 19 3 13 11/2" 59 M 95
11/4" x 11/4” RCRBOC040E 27 21 3 17 2" 72 M 155
11/2" x 11/2” RCRBOC050F 32 21 3 24 21/4" 79 M 240
2" x 2” RCRBOC063G 39 26 3 30 23/4" 96 M 405
21/2" x 21/2”* RCRBOC075H 44 30 3 32 31/2" 119 L 625
3" x 3”* RCRBOC090I 52 33 5 36 4" 134 L 865
4" x 4”* RCRBOC110L 61 39 5 40 5" 163 L 1340
Reducing bush plain/BSP female threaded BS/Metric / Riduzione incollaggio BS/Filettatura Femmina
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 D G Pack
ImballoWeight (GR)
Peso
1/2" x 3/8" RCRRCC020A 16 1/2" 3/8" 10 5
3/4" x 1/2" RCRRCC025B 19 3/4" 1/2" 10 8
1" x 3/4" RCRRCC032C 22 1" 3/4" 10 15
Composite union plain/BSP female brass threaded BS/Metric / Bocchettone incollaggio BS/Femmina filettata in ottone
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice E L1 Z1 Z2 Pack
ImballoWeight (GR)
Peso
1/2" x 1/2” RCRBBC020B 28 45 3 8 1 165
3/4" x 3/4” RCRBBC025C 36 49 3 8 1 290
1" x 1” RCRBBC032D 42 52 3 8 1 310
11/4" x 11/4” RCRBBC040E 53 60 3 8 1 450
11/2" x 11/2” RCRBBC050F 59 68 3 9 1 490
2" x 2” RCRBBC063G 74 81 3 10 1 950
21/2" x 21/2” RCRBBC075H 93 94 3 16 1 1357
3" x 3” RCRBBC090I 105 103 5 14 1 1663
Composite union plain/BSP male taper brass threaded BS/Metric / Bocchettone incollaggio BS/ Maschio Filettato in ottone
d x R (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice E L1 Z1 Pack
ImballoWeight (GR)
Peso
1/2" x 1/2” RCRBNC020B 28 58 3 1 175
3/4" x 3/4” RCRBNC025C 36 69 3 1 238
1" x 1” RCRBNC032D 42 72 3 1 324
11/4" x 11/4” RCRBNC040E 53 86 3 1 469
11/2" x 11/2” RCRBNC050F 59 92 3 1 595
2" x 2” RCRBNC063G 74 109 3 1 982
21/2" x 21/2” RCRBNC075H 93 127 3 1 1663
3" x 3” RCRBNC090I 105 139 5 1 2184
BOC
RCC
BBC
BNC
36
PVCu adaptor fittings / PVCu Raccordi di passaggio
Elbow 90° plain/BSP female threaded with stainless steel reinforcing ring BS/Metric / Gomito 90° incollaggio BS /Filettato Femmina con anello di rinforzo in acciaio inox
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z1 Z2 Pack
ImballoWeight (GR)
Peso
1/2" x 1/2” RCRGOCR020B 17 15 11 12 S 24
3/4" x 3/4” RCRGOCR025C 20 16 14 17 M 43
1" x 1” RCRGOCR032D 23 19 17 20 M 72
11/4" x 11/4” RCRGOCR040E 27 21 21 27 M 106
11/2" x 11/2” RCRGOCR050F 32 21 26 37 L 175
2" x 2” RCRGOCR063G 39 26 33 46 L 289
Tee 90° plain/BSP female threaded branch with stainless steel reinforcing ring BS/Metric / Raccordo a T 90° incollaggio BS /Filettato Femmina con anello di rinforzo in acciaio inox
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z1 Z2 Pack
ImballoWeight (GR)
Peso
1/2" x 1/2” RCRTICR020B 17 15 11 12 M 34
3/4" x 3/4” RCRTICR025C 20 16 14 17 M 53
1" x 1” RCRTICR032D 23 19 17 20 M 87
11/4" x 11/4” RCRTICR040E 27 21 21 27 M 136
11/2" x 11/2” RCRTICR050F 32 21 26 37 L 215
2" x 2” RCRTICR063G 39 26 33 46 L 359
Socket plain/BSP female threaded with stainless steel reinforcing ring BS/Metric / Manicotto incollaggio BS /Filettato Femmina con anello di rinforzo in acciaio inox
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z E Pack
ImballoWeight (GR)
Peso
1/2" RCRMACR020B 17 15 4 28 S 22
3/4" RCRMACR025C 20 16 6 34 M 33
1" RCRMACR032D 23 19 6 42 M 50
11/4" RCRMACR040E 27 21 8 51 M 76
11/2" RCRMACR050F 32 21 13 61 M 115
2" RCRMACR063G 39 26 15 75 M 189
Spigot plain/BSP female threaded with stainless steel reinforcing ring BS/Metric / Adattatore maschio incollaggio/ Filettato Femmina con anello di rinforzo in acciaio inox
d x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 E Z Pack
ImballoWeight (GR)
Peso
1/2" RCRAFCR020B 17 15 28 24 S 24
3/4" RCRAFCR025C 20 16 34 27 M 33
1" RCRAFCR032D 23 19 42 30 M 55
11/4" RCRAFCR040E 27 21 51 36 M 81
11/2" RCRAFCR050F 32 21 58 41 M 93
2" RCRAFCR063G 39 26 72 44 10 159
GOC
MAC
AFC
TIC
37
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
PVCu threaded fittings / PVCu Raccordi Filettati
Elbow 90° BSP female threaded Metric / Gomito 90° Filettato Femmina
Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1-L2 Z1-Z2 E Pack
ImballoWeight (GR)
Peso
3/8" RERGOE016A 11 12 24 S 15
1/2" RERGOE020B 15 12 28 S 22
3/4" RERGOE025C 16 17 34 M 37
1" RERGOE032D 19 20 42 M 60
11/4" RERGOE040E 21 26 51 M 95
11/2" RERGOE050F 21 36 62 L 180
2" RERGOE063G 26 45 77 L 310
21/2" RERGOE075H 30 53 89 L 425
3" RERGOE090I 33 65 106 L 740
4" RERGOE110L 39 79 129 L 1050
Elbow 45° BSP female threaded Metric / Gomito 45° Filettato Femmina
Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
1/2" RERGYE020B 15 6 28 S 18
3/4" RERGYE025C 16 9 34 S 30
1" RERGYE032D 19 11 42 M 50
11/4" RERGYE040E 21 15 51 M 80
11/2" RERGYE050F 21 22 62 L 155
2" RERGYE063G 26 26 77 L 275
21/2" RERGYE075H 30 31 89 L 360
3" RERGYE090I 33 38 106 L 620
4" RERGYE110L 39 46 129 L 830
Tee 90° BSP female threaded Metric / Raccordo a T 90° Filettato Femmina
Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1-L2 Z1-Z2 E Pack
ImballoWeight (GR)
Peso
3/8" RERTIE016A 11 12 24 S 18
1/2" RERTIE020B 15 12 28 M 30
3/4" RERTIE025C 16 17 34 M 50
1" RERTIE032D 19 20 42 M 75
11/4" RERTIE040E 21 26 51 M 120
11/2" RERTIE050F 21 36 62 L 240
2" RERTIE063G 26 45 77 L 410
21/2" RERTIE075H 30 53 89 L 540
3" RERTIE090I 33 65 106 L 880
4" RERTIE110L 39 79 129 L 1310
GOE
GYE
TIE
38
PVCu threaded fittings / PVCu Raccordi Filettati
Socket BSP female threaded Metric / Manicotto Filettato Femmina
Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
3/8" RERMAE016A 11 6 23 S 8
1/2" RERMAE020B 15 7 27 S 20
3/4" RERMAE025C 16 7 33 M 25
1" RERMAE032D 19 8 41 M 45
11/4" RERMAE040E 21 8 50 M 65
11/2" RERMAE050F 21 8 61 M 70
2" RERMAE063G 26 8 75 M 125
21/2" RERMAE075H 30 9 88 M 190
3" RERMAE090I 33 10 106 M 290
4" RERMAE110L 39 11 129 L 460
Union BSP female threaded Metric / Bocchettone con o’ring Filettato Femmina
Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L Z1 Z2 F E Pack
ImballoWeight (GR)
Peso
3/8" RERBOE016A 11 6 14 3/4" 34 S 27
1/2" RERBOE020B 15 4 11 1" 42 S 45
3/4" RERBOE025C 16 6 13 11/4" 52 M 72
1" RERBOE032D 19 6 13 11/2" 59 M 100
11/4" RERBOE040E 21 8 17 2" 72 M 160
11/2" RERBOE050F 21 13 24 21/4" 79 M 264
2" RERBOE063G 26 15 30 23/4" 96 M 455
21/2"* RERBOE075H 30 17 32 31/2" 119 L 635
3"* RERBOE090I 33 23 36 4" 134 L 905
4"* RERBOE110L 39 27 40 5" 163 L 1355
Plug BSP male threaded Metric / Tappo Filettato maschio
R (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L H O Pack
ImballoWeight (GR)
Peso
3/8" RERTAE016A 11 23 19 1200 8
1/2" RERTAE020B 15 29 24 650 10
3/4" RERTAE025C 16 30 30 400 15
1" RERTAE032D 19 33 36 500 25
11/4" RERTAE040E 21 39 46 350 40
11/2" RERTAE050F 21 39 50 280 45
2" RERTAE063G 26 43 65 160 80
21/2" RERTAE075H 30 51 80 80 137
3" RERTAE090I 33 56 95 50 210
4" RERTAE110L 39 63 120 36 340
MAE
BOE
TAE
39
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
PVCu threaded fittings / PVCu Raccordi Filettati
Cap BSP female threaded Metric / Calotta filettata Femmina
Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L H E Pack
ImballoWeight (GR)
Peso
3/8" RERCAE016A 11 22 23 1000 7
1/2" RERCAE020B 15 21 28 500 15
3/4" RERCAE025C 16 23 34 300 17
1" RERCAE032D 19 26 42 180 20
11/4" RERCAE040E 21 29 51 120 35
11/2" RERCAE050F 21 32 61 230 50
2" RERCAE063G 26 37 75 120 80
21/2" RERCAE075H 30 50 89 60 190
3" RERCAE090I 33 53 103 30 270
4" RERCAE110L 39 59 130 25 420
Reducing bush BSP male threaded/BSP female threaded Metric / Riduzione maschio filettato/Femmina filettata
R x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z O Pack
ImballoWeight (GR)
Peso
1/2” x 1/4” RERRCE020A 15 11 16 24 S 10
3/4" x 1/2" RERRCE025B 16 15 13 30 S 13
1" x 3/4" RERRCE032C 19 16 15 36 M 20
11/4" x 1" RERRCE040D 21 19 16 46 M 35
11/2" x 11/4" RERRCE050E 21 21 14 50 M 37
2" x 11/2" RERRCE063F 26 21 18 65 M 67
21/2" x 2" RERRCE075G 30 26 21 80 M 135
3" x 21/2" RERRCE090H 33 30 20 95 M 160
4" x 3" RERRCE110I 39 33 24 120 L 380
Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z E1 E2 Pack
ImballoWeight (GR)
Peso
1/2" x 3/8" RERMRE020A 15 11 6 28 23 S 17
3/4" x 1/2" RERMRE025B 16 15 7 34 27 M 25
1" x 3/4" RERMRE032C 19 16 7 42 33 M 40
11/4" x 1" RERMRE040D 21 19 8 51 41 M 62
11/2" x 11/4" RERMRE050E 21 21 8 58 50 M 72
2" x 11/2" RERMRE063F 26 21 8 72 61 M 115
21/2" x 2" RERMRE075G 30 26 8 89 75 M 128
3" x 21/2" RERMRE090H 33 30 9 103 88 L 286
4" x 3" RERMRE110I 39 33 10 130 106 L 436
CAE
RCE
MRE
Reducing piece BSP female threaded/BSP female threaded Metric / Riduzione Femmina Filettata / Femmina Filettata
40
PVCu threaded fittings / PVCu Raccordi Filettati
Reducing piece BSP female threaded/BSP male threaded Metric / Riduzione Femmina Filettata / Maschio Filettato
Rp x R (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z O E Pack
ImballoWeight (GR)
Peso
3/8” x 1/2" RERMGE016B 11 15 22 30 28 S 16
1/2” x 3/4" RERMGE020C 15 16 24 36 34 S 22
3/4” x 1" RERMGE025D 16 19 26 46 42 S 37
1” x 11/4" RERMGE032E 19 21 30 55 51 M 59
11/4” x 11/2" RERMGE040F 21 21 33 60 58 M 75
11/2” x 2" RERMGE050G 21 26 34 75 72 M 110
2” x 21/2" RERMGE063H 26 30 38 90 89 M 190
21/2” x 3" RERMGE075I 30 33 44 105 103 M 262
3” x 4" RERMGE090L 33 39 48 130 130 M 350
Reducing nipple BSP male threaded/BSP male threaded Metric / Nipplo Filettato Maschio /Maschio
R x R (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 H O Pack
ImballoWeight (GR)
Peso
1/2" x 3/8" RERNRE020A 15 11 38 24 S 10
3/4" x 1/2" RERNRE025B 16 15 43 30 S 17
1" x 3/4" RERNRE032C 19 16 47 36 M 25
11/4" x 1" RERNRE040D 21 19 56 46 M 42
11/2" x 11/4" RERNRE050E 21 21 58 50 M 48
2" x 11/2" RERNRE063F 26 21 62 65 M 80
21/2" x 2" RERNRE075G 30 26 73 80 M 138
3" x 21/2" RERNRE090H 33 30 82 95 M 208
4" x 3" RERNRE110I 39 33 90 120 M 340
Reducing piece BSP male threaded/BSP female threaded / Riduzione Filettata Maschio /Filettata Femmina
R x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z E O Pack
ImballoWeight (GR)
Peso
1/2" x 3/8" RERRIE020A 15 11 24 23 24 S 12
3/4" x 3/8" RERRIE025A 16 11 25 23 30 S 16
3/4" x 1/2" RERRIE025B 16 15 26 28 30 S 20
1" x 3/8" RERRIE032A 19 11 28 23 36 M 25
1" x 1/2" RERRIE032B 19 15 29 28 36 M 26
1" x 3/4" RERRIE032C 19 16 30 34 36 M 26
11/4" x 1/2" RERRIE040B 21 15 33 28 46 M 42
11/4" x 3/4" RERRIE040C 21 16 33 34 46 M 43
11/4" x 1" RERRIE040D 21 19 33 42 46 M 46
11/2" x 3/4" RERRIE050C 21 16 34 34 50 M 46
11/2" x 1" RERRIE050D 21 19 34 42 50 M 50
11/2" x 11/4" RERRIE050E 21 21 34 51 55 M 60
2" x 1" RERRIE063D 26 19 37 42 65 M 85
MGE
NRE
RIE
41
PVCu Pipe & Fittings / Tubi e Raccordi in PVCu
PVCu threaded fittings / PVCu Raccordi Filettati
Reducing piece BSP male threaded/BSP female threaded / Riduzione Filettata Maschio /Filettata Femmina
R x Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L1 L2 Z E O Pack
ImballoWeight (GR)
Peso
2" x 11/4" RERRIE063E 26 21 37 51 65 M 85
2" x 11/2" RERRIE063F 26 21 37 58 65 M 87
21/2" x 11/4" RERRIE075E 30 21 43 51 80 M 140
21/2" x 11/2" RERRIE075F 30 21 43 58 80 M 138
21/2" x 2" RERRIE075G 30 26 43 72 80 M 142
3" x 11/2" RERRIE090F 33 21 47 58 95 M 200
3" x 2" RERRIE090G 33 26 47 72 95 M 205
3" x 21/2" RERRIE090H 33 30 47 89 95 L 215
4" x 2" RERRIE110G 39 26 53 72 120 L 325
4" x 21/2" RERRIE110H 39 30 53 89 120 L 330
4" x 3" RERRIE110I 39 33 53 103 120 L 350
Barrel nipple BSP male taper threaded Metric / Barra Passaparete Filettata Maschio
R (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L Pack
ImballoWeight (GR)
Peso
G
1/2” RERBNE020B 60 S 11
3/4” RERBNE025C 60 M 19
1” RERBNE032D 80 M 36
11/4” RERBNE040E 80 M 51
11/2” RERBNE050F 80 M 64
2” RERBNE063G 100 M 119
21/2” RERBNE075H 120 M 178
3” RERBNE090I 150 L 355
4” RERBNE110L 150 L 420
Backnut BSP female threaded / Ghiera Filettata Femmina per Passaparete
Rp (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice E H O Pack
ImballoWeight (GR)
Peso
1/2" RERNUE020B 28 13 38 S 13
3/4" RERNUE025C 33 14 43 S 16
1" RERNUE032D 46 16 56 M 30
11/4" RERNUE040E 50 18 65 M 35
11/2" RERNUE050F 60 19 72 M 45
2" RERNUE063G 80 21 94 M 95
21/2" RERNUE075H 95 23 105 M 180
3" RERNUE090I 110 27 125 M 235
4" RERNUE110L 140 31 154 M 350
NUE
BNE
RIE
42
PVCu threaded fittings / PVCu Raccordi Filettati
Tank connector BSP male threaded/spigot serrated / Raccordo Passaparete Completo
R (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L Pack
ImballoWeight (GR)
Peso
1/2” RERASE020B 60 S 32
3/4” RERASE025C 60 S 42
1” RERASE032D 80 S 93
11/4” RERASE040E 80 M 118
11/2” RERASE050F 80 M 163
2” RERASE063G 100 M 280
21/2” RERASE075H 120 L 419
3” RERASE090I 150 L 680
4” RERASE110L 150 L 1019
Tank connector BSP male threaded/spigot serrated / Portagomma maschio Filettato
R x d (EN UNI 10226)Nominal SizeMisura nominale
CodeCodice L H D1 D2 O Pack
ImballoWeight (GR)
Peso
3/8” x 16 x 18 RERPGE016A 12 64 16 18 19 S 15
1/2” x 20 x 22 RERPGE020B 15 70 20 22 24 S 20
3/4” x 25 x 27 RERPGE025C 17 76 25 27 30 S 30
1” x 30 x 32 RERPGE032D 20 80 32 34 36 M 50
11/4” x 40 x 42 RERPGE040E 22 92 40 42 46 L 70
11/2” x 50 x 52 RERPGE050F 23 99 50 52 50 M 118
2” x 60 x 64 RERPGE063G 26 118 60 63 65 M 190
ASE
PGE
43
PVCu ValvesFlowmeters / Flussimetri
Flowmeter with Transparent PVC-U Body and PVDF Float / Flussimetri con corpo in PVCu trasparente e galleggiante in PVDF
Flowmeter with Transparent PVC-U Body and PVDF Float / Flussometri con corpo in PVCu trasparente e galleggiante in PVDF
Nominal SizeMisura nominale
CodeCodici
DescriptionDescrizione
16 / 1.5-15 HDRFLU016A PVC 16 MM - M. RANGE 1.5-15
16 / 2.5-25 HDRFLU016B PVC 16MM - M. RANGE 2.5-25
16 / 5-50 HDRFLU016C PVC 16MM - M. RANGE 5-50
16 / 10-100 HDRFLU016D PVC 16MM - M. RANGE 10-100
20 / 8-80 HDRFLU020A PVC 20MM - M. RANGE 8-80
20 / 15-150 HDRFLU020B PVC 20MM - M. RANGE 15-150
20 / 20-200 HDRFLU020C PVC 20MM - M. RANGE 20-200
32 / 15-150 HDRFLU032AE PVC 32MM - M. RANGE 15-150
32 / 30-300 HDRFLU032BC PVC 32MM - M. RANGE 30-300
32 / 50-500 HDRFLU032CC PVC 32MM - M. RANGE 50-500
32 / 100-1000 HDRFLU032DC PVC 32MM - M. RANGE 100-1000
32 / 50-500 HDRFLU032C PVC 32MM - M. RANGE 50-500
32 / 100-1000 HDRFLU032D PVC 32MM - M. RANGE 100-1000
40 / 150-1500 HDRFLU040A PVC 40MM - M. RANGE 150-1500
40 / 250-2500 HDRFLU040B PVC 40MM - M. RANGE 250-2500
50 / 200-2000 HDRFLU050A PVC 50MM - M. RANGE 200-2000
50 / 300-3000 HDRFLU050B PVC 50MM - M. RANGE 300-3000
50 / 600-6000 HDRFLU050C PVC 50MM - M. RANGE 600-6000
63 / 600-6000 HDRFLU063B PVC 63MM - M. RANGE 600-6000
63 / 1000-10000 HDRFLU063C PVC 63MM - M. RANGE 1000-10000
63 / 1500-15000 HDRFLU063D PVC 63MM - M. RANGE 1500-15000
Variable are flowmetersThe flow meter operates on the float principle and is used for flow rate measurements in closed pipelines. The medium flows through the vertically installed flow meter from bottom to top. This raises the float and shows the current flow rate on the scale on the measuring device. The read-off edge corresponds to the largest diameter of the float.The flow meters come as standard with a water scale and a % scale, and two set-point indicators.
Special features
Funzionamento ll flussimetro funziona sul principio del galleggiante e viene utilizzato per misure di portata in tubazioni chiuse. Il fluido scorre attraverso il flussimetro installato in verticale dal basso verso l’alto. Così facendo solleva il galleggiante e mostra la portata corrente sulla scala del dispositivo di misurazione. I misuratori di portata sono equipaggiati di serie con una scala indicante la portata e una scala indicante la %, e due indicatori set-point.
Caratteristiche• Fracture-proof and corrosion-resistant• Radially removable• Special adhesive scales for liquid and gaseous media• Holder for accessories (limit value contacts)• Measuring tube carries the DN label, and also the measuring
range and material• PVDF floats and stops as standard• Measuring ranges 1.5 – 15.000 l/h
• Resistente alla corrosione e agli urti• Rimovibile• Scale di portata speciali per liquidi e sostanze gassose• Supporto per accessori• Tubo di misura con indicazione della portata e del DN• Galleggianti standard in PVDF• Range di misura 1.5 – 15000 l/h
Dimensions / Dimensioni
DescriptionDescrizione DN L Lm
1.5 - 15 10 165 122.5 - 25 155 - 50 1710 - 100 208 - 80 15 185 2215 - 150 2320 - 200 2615 - 150 25 20030 - 30050 - 500100 - 1000
Dimensions / Dimensioni
DescriptionDescrizione DN L Lm
50 - 500 25 350 400
100 - 1000
150 - 1500 32 350 408
250 - 2500
200 - 2000 40 350 418
300 - 3000
600 - 6000
600 - 6000 50 350 432
1000 - 10000
1500 - 15000
SCALE FOR H2O (Suitable also for demineralized H2O) PVC pipe (max 60°C) - PVC floater
Scala per acqua (disponibile anche per acqua demineralizzata) Temperatura massima 60° C. Galleggiante in PVC
44
PVCu ValvesValvole PVCu
45
PVCu Valves / Valvole PVC-U
Technical Features• Ballocked in place on both sides (BK-BX-SX)• Fully roundball smoothed by special turning machine• PTFE ball seating’s• Nominal pressure: sizes up to 63/2” NP 16 bars, sizes 75/2 ½”
and above NP 10 bars• Sealing adjustment and disassembling by key incorporated on
the handle (no need of any separate tool) (BK-BX-SX)• Handle in shock resistant ABS• Each “Effast Industrial” valve BK is tested against any leakage
internal or external• “Effast” valves are manufactured with a PVC-uH compound fit for
contact with potable water in accordance with regulations in force in Italy, France, Germany, Holland, U.K. and Scandinavian countries.
• Use: Fluids (excluding for DN.25, dangerous fluids, group 1 with vapour tension at 60oc 0.5bar higher then the atmospheric pressure).
Pressure loss: Ball ValvesPerdite di carico: Valvole a sfera
PVC-u ball valves Torque: Ball Valves / PVC-U Valvole a Sfera Coppia di chiusura: Valvole a sfera
Maximum working pressure: Ball ValvesPressione di esercizio ammissibile: Valvole a sfera
Caratteristiche Tecniche:• Sfera bloccata da ambo i due lati (BK-BX-SX)• Sfera lavorata (BK e BX-BV >40)• Guarnizione di tenuta della sfera in PTFE• PFA – Pressione di esercizio ammissibile (PN): PN 16 da DN10
DN50; PN 10 da DN63 a DN100.• Smontaggio valvola e serraggio guarnizioni mediante maniglia
incorporata, non necessita di utensili aggiuntivi. • Maniglia in ABS antiurto• Le valvole serie “Industria” sono testate individualmente per
verificare eventuali perdite.• Le valvole “Effast” sono prodotte con compound di PVC-U idoneo
al contatto con acqua potabile secondo le normative in vigore in Italia, Francia, Germania, Olanda, U.K. e paesi Scandinavi
• Adatte per fluidi (con esclusione del DN 25 adatte per fluidi pericolosi, gruppo 1 con tensione di vapore a 60°C 0,5 bar maggiore della pressione atmosferica⁄
16/20½ 1 1 1½ 2 2½ 3 4
25 32 40 50 63 75 90 110 D3 8 3 4 1 4
NmBK - BX
30
2424
10
75
321.5
bar
1
0.1
10 100 100 1.000 10.000
0.01
0.001L/m
DN100
DN80
DN65
DN50
DN40
DN32
DN25
DN20
DN15
bar PSI
Co
16
14
12
10
8
6
4
2
00-20-40 20 40 60 80
227.6
199.1
170.7
142.2
113.8
85.3
55.9
28.4
0
DN 10÷50
PN16
PN10DN 65÷100
Flow rate: Ball Valves / Portata: Valvole a sfera D mm G DN
16 3⁄8” 15 190
20 1⁄2” 15 190
25 3⁄4” 20 380
32 1” 25 700
40 1 1⁄4” 32 1000
50 1 1⁄2” 40 1700
63 2” 50 3200
75 2 1⁄2” 65 5000
90 3” 80 7000
110 4” 100 10000
PVCu ValvesValvole PVCu
46
10 bar
bar121110
987654321
-10 0 10 20 30 40 50 60 70 80 90 100 Co
PVC-u foot valves / PVC-U valvole di fondoMaximum working pressure: Foot ValvesPressione di esercizio ammissibile: Valvole di fondo
PVC-u butterfly valves / PVC-U Valvole a farfallaMaximum working pressure: Butterfly ValvesPressione di esercizio ammissibile: Valvole a farfalla
bar PSI
Co
16
14
12
10
8
6
4
2
00-20-40 20 40 60 80
227.6
199.1
170.7
142.2
113.8
85.3
55.9
28.4
0
DN 10÷50
PN16
PN10DN 65÷100
Maximum torque at maximum working pressure: Butterfly ValvesCoppia di chiusura alla massima pressione di esercizio ammissibile: Valvole a farfalla
D 63-75 90 110 125 140 160 200-225
DN 65 80 100 125 125 150 200
Nm 18 18 30 40 65 75 90
Pressure loss: Butterfly Valves / Perdite di carico: Valvole a farfalla
Maximum working pressure: Butterfly Valves / Massima Pressione di esercizio ammissibile: Valvole a farfalla
Minimum opening pressure: Butterfly Valves / Pressione minima di Apertura: Valvole a FarfallaD mm 20 25 32 40 50 63 75 90 110
G 1⁄2” 3⁄4” 1” 11⁄4” 11⁄2” 2” 21⁄2” 3” 4”
DN 15 50 25 32 40 50 65 80 100
bar 0.002 0.002 0.002 0.004 0.004 0.006 0.010 0.010 0.040
bar1
0.1
0.01
0.001
1 10 100 1000 10000
DN
15D
N20
DN
25D
N32
DN
40D
N50
bar PSI
Co
16
14
12
10
8
6
4
2
00-20-40 20 40 60 80
227.6
199.1
170.7
142.2
113.8
85.3
55.9
28.4
0
DN 10÷50
PN16
PN10DN 65÷100
47
PVCu Valves / Valvole PVC-U
PVC-u Industrial ball valves - “BK” and”BK1” range / PVC-U Valvole a sfera serie “Industria” – BK e BK1
No Description / Descrizione Material / Materiale No Description / Descrizione Material / Materiale
1 Handle / Maniglia ABS 7 Ball / Sfera PVC-uH
2 Stem O-Rings / Guarnizioni dello Stelo EPDM/FPM 8 Body O-Ring / Guarnizioni del corpo EPDM/FPM
3 Stem / Stelo PVC-uH 9 Gaskets carrier / Porta Guarnizioni PVC-uH
4 Body / Corpo PVC-uH 10 O-Rings under socket / Guarnizioni dei manicotti EPDM/FPM
5 O-Rings under seatings / Guarnizione della sede EPDM/FPM 11 Sockets / Manicotti PVC-uH
6 Ball seating / Guarnizioni di tenuta della sfera PTFE 12 Nuts / Ghiere PVC-uH
All valves can be supplied with ASTM or NPT socket ends / Tutte le valvole possono essere fornite con manicotti ASTM o NPT
PVC-u ball valves with adjustable seating - “BX” range / PVC-U Valvole a sfera serie “Industria” – BX
No Description / Descrizione Material / Materiale No Description / Descrizione Material / Materiale
1 Handle / Maniglia ABS 7 Ball / Sfera PVC-uH
2 Stem O-Rings / Guarnizioni dello Stelo EPDM 8 Body O-Ring / Guarnizioni del corpo EPDM
3 Stem / Stelo PVC-uH 9 Gaskets carrier / Porta Guarnizioni PVC-uH
4 Body / Corpo PVC-uH 10 O-Rings under socket / Guarnizioni dei manicotti EPDM
5 O-Rings under seatings / Guarnizione della sede EPDM 11 Sockets / Manicotti PVC-uH
6 Ball seating / Guarnizioni di tenuta della sfera PTFE 12 Nuts / Ghiere PVC-uH
All valves can be supplied with ASTM or NPT socket ends / Tutte le valvole possono essere fornite con manicotti ASTM o NPT
48
PVC-u ball valves with adjustable seating - “SX” range / PVC-U Valvole a sfera monoghiera serie “Industria” – SX
No Description / Descrizione Material / Materiale No Description / Descrizione Material / Materiale
1 Handle / Maniglia ABS 7 Ball / Sfera PVC-uH
2 Stem O-Rings / Guarnizioni dello Stelo EPDM/FPM 8 Body O-Ring / Guarnizioni del corpo EPDM/FPM
3 Stem / Stelo PVC-uH 9 Gaskets carrier / Porta Guarnizioni PVC-uH
4 Body / Corpo PVC-uH 10 O-Rings under socket / Guarnizioni dei manicotti EPDM/FPM
5 O-Rings under seatings / Guarnizione della sede EPDM/FPM 11 Sockets / Manicotti PVC-uH
6 Ball seating / Guarnizioni di tenuta della sfera PTFE 12 Nuts / Ghiere PVC-uH
All valves can be supplied with ASTM or NPT socket ends / Tutte le valvole possono essere fornite con manicotti ASTM o NPT
PVC-u ball valves “BV” range / PVC-U Valvole a sfera Serie “Acqua” – BV
No Description / Descrizione Material / Materiale No Description / Descrizione Material / Materiale
1 Handle / Maniglia ABS 8 Body O-Ring / Guarnizioni del corpo EPDM
2 Stem O-Rings / Guarnizioni dello Stelo EPDM 9 Gaskets carrier / Porta Guarnizioni PVC-uH
3 Stem / Stelo PVC-uH 10 O-Rings under socket / Guarnizioni dei manicotti EPDM
4 Body / Corpo PVC-uH 11 Sockets / Manicotti PVC-uH
6 Ball seating / Guarnizioni di tenuta della sfera PE 12 Nuts / Ghiere PVC-uH
7 Ball / Sfera PVC-uH
All valves can be supplied with ASTM or NPT socket ends / Tutte le valvole possono essere fornite con manicotti ASTM o NPT
49
PVCu Valves / Valvole PVC-U
PVC-u ball valves “SV” range / PVC-U Valvole a sfera monoghiera Serie “Acqua” – SV
No Description / Descrizione Material / Materiale No Description / Descrizione Material / Materiale
1 Handle / Maniglia ABS 8 Body O-Ring / Guarnizioni del corpo EPDM
2 Stem O-Rings / Guarnizioni dello Stelo EPDM 9 Gaskets carrier / Porta Guarnizioni PVC-uH
3 Stem / Stelo PVC-uH 10 O-Rings under socket / Guarnizioni dei manicotti EPDM
4 Body / Corpo PVC-uH 11 Sockets / Manicotti PVC-uH
6 Ball seating / Guarnizioni di tenuta della sfera PE 12 Nuts / Ghiere PVC-uH
7 Ball / Sfera PVC-uH
All valves can be supplied with ASTM or NPT socket ends / Tutte le valvole possono essere fornite con manicotti ASTM o NPT
PVC-u butterfly valves “FV” range / PVC-U Valvole a farfalla – FV
No Description / Descrizione Material / Materiale No Description / Descrizione Material / Materiale
1 Handle / Maniglia ABS 7 Anti-friction ring / Anello anti frizione PTFE
2 Plate / Disco di regolazione della chiusura ALL 8 O-Ring / Guarnizione EPDM/FPM
3 Disc / Farfalla di chiusura PVC-uH 9 Stem / Stelo GI/SS
4 Gasket / Guarnizione EPDM/FPM 10 Support / Supporto GI/SS
5 Body / Corpo PVC-uH 11 Bolt / Viti SS
6 Retainging ring / Anello di tenuta GI/SS 12 Plug / Tappo PP
Available with hand wheel gear box and push-rod SS / Disponibile con volantino e asta acciaio inox
50
PVC-u check valves “CV” range / PVC-U Valvole di non ritorno – CV
No Description / Descrizione Material / Materiale No Description / Descrizione Material / Materiale
1 Body / Corpo PVC-uH 6 Support / Supporto PVC-uH
2 Spring / Molla SS/SS-PTFE 7 O-Ring under sockets / Guarnizioni del corpo EPDM/FPM
3 Swivel Plug / Otturatore PVC-uH 8 Sockets / Manicotto PVC-uH
4 Body O-Ring / Guarnizione EPDM/FPM 9 Nuts / Ghiere PVC-uH
5 O-Ring / Guarnizione dell’otturatore EPDM/FPM
All valves can be supplied with ASTM or NPT socket ends / Tutte le valvole possono essere fornite con manicotti ASTM o NPT
PVC-u foot valves “HV” range / PVC-U Valvole di fondo – HV
No Description / Descrizione Material / Materiale No Description / Descrizione Material / Materiale
1 Body / Corpo PVC-uH 6 Support / Supporto PVC-uH
3 Swivel Plug / Otturatore PVC-uH 7 O-Ring under sockets / Guarnizioni del corpo EPDM/FPM
4 Body O-Ring / Guarnizione EPDM/FPM 8 Sockets / Manicotto PVC-uH
5 O-Ring / Guarnizione dell’otturatore EPDM/FPM 9 Nuts / Ghiere PVC-uH
All valves can be supplied with ASTM or NPT socket ends / Tutte le valvole possono essere fornite con manicotti ASTM o NPT
51
PVCu Valves / Valvole PVC-U
PVC-u air release valves “AV” range / PVC-U Valvole di sfogo aria – AV
No Description / Descrizione Material / Materiale
1 Body / Corpo PVC-uH 6 Support / Supporto PVC-uH
3 Swivel Plug / Otturatore PVC-uH 7 O-Ring under sockets / Guarnizioni del corpo EPDM/FPM
4 Body O-Ring / Guarnizione EPDM/FPM 8 Sockets / Manicotto PVC-uH
5 O-Ring / Guarnizione dell’otturatore EPDM/FPM 9 Nuts / Ghiere PVC-uH
All valves can be supplied with ASTM or NPT socket ends / Tutte le valvole possono essere fornite con manicotti ASTM o NPT
52
Kit supporti per attacco Namur:
Valvola FULLY MACHINED: per ovviare alle situazioni di ovalizzazione
tipiche dei prodotti plastici, vengono lavorate con macchine a controllo
numerico:
- Sfera piena levigata
- Sede asta- Asta
- Diametro di appoggio O’ring radiale
- Sedi seggi sfera (D50, D63)
Garantendo quindi accoppiamenti e tenute di tipo “meccanico”
(tolleranze ristrette).
Accessori disponibili:
- Supporto in nylon caricato per motore elettrico e pneumatico
- Supporto per microswitch
- Blocco maniglia su gradi prefissati
- Inserti metallici per bloccaggio su staffe oppure basetta di fissaggio
- BK1 Ø 32 mm - 40 mm - 50 mm - 63 mm
Caratteristiche generali:
Attacchi ISO 5211 - Protezione IP 65 - Comando manuale - Indicatore
ottico di posizione - 2 contatti di fi ne corsa - Voltaggi: 12-24-48-110 CC,
220-240 AC.
Namur kit support:
This valve is FULL MACHINED in order to get the best fi nished quality,
and to avoid typical ovalizations of plastic productions, we machine all the
undermentioned part with a special numerical controlled loath:
- Fully round and smoothed ball
- Stem support
- Stem
- Threaded O’ring carrier
- Ball seatings (D 50, D 63)
We therefore guarantee you a perfect tightness and coupling on all sizes.
(reduced tolerances).
Accessories:
- Nylon loaded support for electrical or pneumatical actuator
- Microswitch support
- Handle block according set grades
- Metal inserts for blocking on saddles or
- Flat fi xing support
- BK1 Ø 32 mm - 40 mm - 50 mm - 63 mm
General features:
Assembly ISO 5221 - Electrical protection IP 65 - Manual override - Visual
position indicatior - n. 2 additional limit switch contacts - VDC: 12-VAC:
24-110-220/240.
Electric actuated ball valves / Valvole a sfera a comando elettrico
EBK
53
PVC-u Actuated Valves / Valvole Attuate in PVC-u
Optionals attuatori:
- Blocco di sicurezza
- Resistenza elettrica
- Trasduttore da 4-20 mA o 0-10 V
Le valvole “EFFAST” serie “INDUSTRIAL”sono realizzate in PVC atossico
e sono idonee a venire in contatto con acqua potabile secondo le leggi
e prescrizioni sanitarie vigenti in campo internazionale (Italia, Francia,
Germania, Olanda, U.K., Paesi Scandinavi, ecc.).
Applicazione: fluidi (esclusi, per DN>25, fluidi pericolosi gruppo 1 con
tensione di vapore a 60°C superiore di 0,5 bar alla pressione atmosferica).
O’rings in gomma EPDM perossidica: ottimo indice di “compression
set”: anche dopo lunga permanenza nelle loro sedi, gli anelli di tenuta
mantengono la loro elasticità, a garanzia di una perfetta tenuta.
Actuators optionals:- Safety block
- Electic heater
- Transducer 4-20 mA or 0-10 V
“Effast industrial” valves are manufactured with a PVC compound fit for
contact with portalble water in accordance wiyh regulations in force in
Italy, France, Germany, Holand, U.K. and Scandinavian countries.
Use: fluids (excluding, for DN>25, dangerous fluids, goup 1 with vapour
tension at 60°C, 0,5 bar higher then the atmospheric pressure).
All O’rings are in EPDM hyperoxyd: this quality of EPDM offers an excellent
“compression set” index that is to say that even after a long working
period these O’rings keep their original elasticity, and remain perfectly into
position assuring ypu perfect thightness.00
D mm D inch DN E H O R S T Z V Weigh (gr)Peso
16 3/8“ 10 110 78 45 258 110 96 46 168 1840
20 1/2” 15 110 78 45 256 110 96 46 168 1840
25 3/4” 20 116 90 48 262 110 96 52 168 1900
32 1” 25 109 104 35 255 69 96 60 168 1900
40 1 1/4” 32 122 120 41 268 79 96 68 168 2050
50 1 1/2” 40 141 140 50 281 98 96 78 168 2250
63 2” 50 162 169 60 308 118 96 93 168 2650
75 2 2/2” 65 234 227 110 434 220 108 139 168 5400
90 3” 80 234 242 110 434 220 108 139 168 5500
110 4” 100 275 282 132,5 475 255 108 160 168 8000
EBK from D.20 to D.63VDC
VAC
12 24 110
24 110 220/240
model L20
model H20
EBK from D.75 to 110VDC
VAC
12 24 110
24 110 220/240
model L55
model H55
EBK da D.20 a D.63VDC
VAC
12 24 110
24 110 220/240
modello L20
modello H20
EBK da D.75 a 110VDC
VAC
12 24 110
24 110 220/240
modello L55
modello H55
54
Valvola a farfalla
- Valvola di intercettazione e regolazione
- Gamma dimensionale da d 63 mm a d 315 mm
- Resistenza a pressioni di esecizio fi no a 10 bar a 20° C
- Corpo: PVC
- Lente: PVC
- Guarnizione: EPDM/FPM
Caratteristiche generali:
Attacchi ISO 5211 - Protezione IP 65 - Comando manuale - Indicatore
ottico di posizione - 2 contatti di fi ne corsa.
Accessori:
- Blocco di sicurezza
- Resistenza elettrica
- Trasduttore da 4-20 mA o 0-10 V
Le valvole a farfalla “EFFAST” sono realizzate in PVC atossico e sono
idonee a venire in contatto con acqua potabile secondo le leggi e
prescrizioni sanitarie vigenti in campo internazionale (Italia, Francia,
Germania, Olanda, U.K., Paesi Scandinavi, ecc.).
Applicazione: fl uidi (esclusi, per DN>25, fl uidi pericolosi gruppo 1 con
tensione di vapore a 60°C superiore di 0,5 bar alla presione atmosferica).
Butterfly valves
- Used for fast control and on/off aperations
- Size range: from d 63 mm up to 315 mm (2” ÷ 12”)
- Working pressure: 10 bar at 20° C
- Body: PVC
- Disc: PVC
- Gasket: EPDM/FPM
General features:
Assembly ISO 5221 - Electrical protection IP 65 - Manual override - Visual
position indicatior - n. 2 additional limit switch contacts.
Accessories:
- Safety block
- Electic heater
- Transducer 4-20 mA or 0-10 V
“Effast butterfl y valves” are manufactured with a PVC compound fi t for
contact with portalble water in accordance wiyh regulations in force in
Italy, France, Germany, Holand, U.K. and Scandinavian countries.
Use: fl uids (excluding, for DN>25, dangerous fl uids, goup 1 with vapour
tension at 60°C, 0,5 bar higher then the atmospheric pressure).
Electric actuated butterfly valves / Valvole a farfalla a comando elettrico
EFV
55
PVC-u Actuated Valves / Valvole Attuate in PVC-u
D mm D inch DN A B C D R S T V H K Weigh (gr)Peso
63-75 2 1/2” 65 177 136 108 74 395 50 108 168 16x4 125/145 2890
90 3” 80 215 200 113 72 413 57 108 168 18x8 160 3160
110 4” 100 233 220 123 72 433 60 108 168 18x8 180 3400
125 5” 125 244 230 128 72 433 62 108 168 18x8 190 3810
140 5” 125 264 251 139 72 464 65 108 168 18x8 210 4070
160 6” 150 292 285 149 72 492 71 108 168 22x8 240 4840
200 8” 200 345 270 170 79 592 71 200 216 22x4 295 6920
225 8” 200 345 270 170 79 592 71 200 216 22x4 295 6920
250 10” 225 437 321 231 101 83 22x4 350/362
315 12” 300 552 371 131,1 400
EFV da D.63 a D.160VDC
VAC
12 24 110
24 110 220/240
modello L55
modello H55
EFV da D.200 a 250VDC
VAC
12 24 110
24 110 220/240
modello L140
modello H140
EFV da D.315 VAC 24 110 220/240 modello H300
EFV from D.63 to D.160VDC
VAC
12 24 110
24 110 220/240
model L55
modello H55
EFV from D.200 to 250VDC
VAC
12 24 110
24 110 220/240
model L140
model H140
EFV from D.315 VAC 24 110 220/240 model H300
56
Funzionamento attuatore pneumatico: con sistema pignone-cremaliera che garantisce coppia costante, robustezza e contenimento delle dimensioni.
Alimentazione : aria compressa filtrata, pressione min 1 Bar - max 10 Bar.
Rack and pinion working system of the neumatical actuator to guarantee costant torque, strenght and reduced overall dimensions.
Air Supply: fi ltered, minimum pressure 1 Bar - max 10 Bar.
Single or double effect pneumatically actuated ball valvesValvole a sfera a comando pneumatico a semplice o doppio effetto
PBK
D mm D inch DN E H O R S Z T V T V Weigh (gr)Peso
16 3/8” 10 110 78 45 209 110 46 59 127 59 127 790
20 1/2” 15 110 78 45 209 110 46 59 127 59 127 790
25 3/4” 15 116 90 48 209 110 52 59 127 59 127 850
32 1” 25 126 104 52,5 209 110 60 59 127 59 127 950
40 1 1/4” 32 141 120 60 209 120 68 59 127 59 127 1100
50 1 1/2” 40 157 140 66 273 130 78 70 133 59 127 1690
63 2” 50 177 169 75 295 150 93 70 33 59 127 2150
75 2 1/2” 65 234 227 110 405 220 139 91 182 83 132 5500
90 3” 80 234 242 110 405 220 139 91 182 83 132 5650
110 4” 100 275 282 132,5 447 255 160 100 203 83 132 8200
57
PVC-u Actuated Valves / Valvole Attuate in PVC-u
D mm
D inch
DN E H O R S Z T V Weigh (gr)Peso
T V Weigh (gr)Peso
63-75 2 1/2” 65 192,5 165 110 104 392,5 48 120 216 6190 83 155 18x4 125/145 3340
90 3” 80 213 200 113 75 413 56 120 216 6460 83 155 18x8 160 3610
110 4” 100 233 220 123 77 433 56 120 216 6700 91 177 18x8 180 4400
125 5” 125 244 230 128 77 444 59 137 290 10810 120 216 18x8 190 7110
140 5” 125 264 251 139 87 464 60 137 290 11070 120 216 18x8 210 7370
160 6” 150 292 285 149 113 492 70 137 290 11840 120 216 18x8 240 8140
200 8” 200 345 273 180 135 592 71 172 368 20720 120 216 22x8 295 9920
225 8” 200 345 273 180 135 592 71 172 368 20720 120 216 22x8 295 9920
Funzionamento attuatore pneumatico: con sistema pignone-cremaliera che garantisce coppia costante, robustezza e contenimento delle dimensioni.
Alimentazione : aria compressa fitrata, pressione min 1 Bar - max 10 Bar.
Rack and pinion working system of the neumatical actuator to guarantee costant torque, strenght and reduced overall dimensions.
Air Supply: filtered, minimum pressure 1 Bar - max 10 Bar.
Single or double effect pneumatically actuated butterfly valves Valvole a farfalla a comando pneumatico a semplice o doppio effetto
PFV
58
EBK Electric scheme / EBK Schema elettrico
3
3
M
1
1
3
A
2
2
LN
VAC
12
3
BC
4
D
5
1
3
C
A
6
2
B
D
12
OPEN
CAMS
POSITIONINGOF THE
GNI
TC
EN
NO
C
RE
SU
EH
T R
OF
SN
OIT
SE
GG
US
NC
* MO : MANUAL OVERRIDE DISCONECTING SWITCH
GNI
TC
EN
NO
C
RO
TA
UT
CA
EH
T
REGULATOR
NCNC
COM
NO NO
COM
NC
OPENCLOSE
CLOSED
1
3
M
1
3
A
2
1
3
VDC
2
2
1
BC D
4 5
3
A
C
6
D
B
1
3
2
2
OPEN
POSITIONING
CAMSOF THE
GNI
TC
EN
NO
C
RO
TA
UT
CA
NC
* MO : MANUAL OVERRIDE DISCONECTING SWITCH
NC
REGULATOR
NC NO
COM
NONC
COM
OPEN
GNI
TC
EN
NO
CS
NOI
TS
EG
GU
SR
ES
U E
HT
RO
FE
HT
CLOSE
CLOSED
3
M
1
1
3
A
2
2
1
3
VDC
2
4
BC D
1
5
3
A
C
6
2
B
D
1
3
2
OPEN
CAMS
POSITIONINGOF THE
EH
TG
NIT
CE
NN
OC
RO
TA
UT
CA
NC
* MO : MANUAL OVERRIDE DISCONECTING SWITCH
REGULATOR
NCNC NO
COM
NO
COM
NC
SN
OIT
SE
GG
US
GNI
TC
EN
NO
C
RE
SU
EH
T R
OF
CLOSE
CLOSED
OPEN
* MO : MANUAL OVERRIDE DISCONECTING SWITCH
/4 20 Am /0 - .V 01
PD S
CO
NN
EC
TIN
G
AC
TUA
TOR
2
0
ROTALUGER
M
ACN
3
1
1
2 3
BCN
NI
2
/ N -
CO
NN
EC
TIN
G
FOR
TH
EU
SE
RS
UG
GE
ST
ION
STH
E
/ L +
CAV / CDV
2
3
1
3
NI PUT
2
UO PT UT
1
OC M
4
CCN
( ) TUO
65
DON CN ON
OC M
3
12
C
AB
SMAC
ISOP NINOIT GFO T HE
D
.V 01÷0 .soP ro .Am 02÷4 .soP
1
NI PUT -( /) O UTPUT ( -)
3
3
12
CLO DES O NEP
L20 H20 L55 H55/H140 L300 H300
Voltage VDC 12 24 110 12 24 110 12 24 110
Voltaggio VDA 24 110 220/240 24 110 220/240 24 110 220/240
Opening TorqueTempo di Manovra S/90° 25 20 25 20 66 60
Working TorqueCoppia di Manovra Nm 20 20 55 55/140 300 300
J2-H20/55/140/300 L20/55/140/300 VAC
J2-L20/55/140/300 H20/55/140/300 VDC VDC
J2-L20/55/140/300 H20/55/140/300 VDC ( 2 Wires )
J2-H20/55/140/300 H20/55/140/300
PVC-u Actuated Valves / Valvole Attuate in PVC-u
59
PVCu Valves / Valvole PVC-U
PVCu manual Ball Valves–Industrial / PVC-U Valvole a Sfera serie “Industria”
Double Union Ball Valve Plain Sockets / Valvola radiale con manicotti ad incollaggio metrici
Nominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
E B L Z H C PN Weight (GR)Peso
16 BDRBKD0160 BDRBKD016V 50 51 16 46 78 65 16 140
20 BDRBKD0200 BDRBKD020V 50 51 16 46 78 65 16 140
25 BDRBKD0250 BDRBKD025V 60 58 19 52 90 70 16 200
32 BDRBK1D0320 BDRBK1D032V 68 65 22 60 104 82 16 300
40 BDRBK1D0400 BDRBK1D040V 80 76 26 68 120 92 16 450
50 BDRBK1D0500 BDRBK1D050V 94 88 31 78 140 105 16 690
63 BDRBK1D0630 BDRBK1D063V 115 104 38 93 169 123 16 1150
75 BDRBKD0750 BDRBKD075V 168 137 44 139 227 168 10 3100
90 BDRBKD0900 BDRBKD090V 168 138 51 139 242 168 10 3250
110 BDRBKD1100 BDRBKD110V 210 166 61 160 282 190 10 5500
Double Union Ball Valve BSP Female Threaded Sockets / Valvola radiale con manicotti Filettati Femmina BSP
Nominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
E B L Z H C PN Weight (GR)Peso
3/8" BERBKE016A BERBKE016V 50 51 16 46 78 65 16 140
1/2" BERBKE020B BERBKE020V 50 51 16 46 78 65 16 140
3/4" BERBKE025C BERBKE025V 60 58 19 52 90 70 16 200
1" BERBK1E032D BERBK1E032V 68 65 22 60 104 82 16 300
11/4" BERBK1E040E BERBK1E040V 80 76 24 68 116 92 16 450
11/2" BERBK1E050F BERBK1E050V 94 88 24 78 126 105 16 690
2" BERBK1E063G BERBK1E063V 115 104 28 93 149 123 16 1150
21/2" BERBKE075H BERBKE075V 168 137 33 139 205 168 10 3050
3" BERBKE090I BERBKE090V 168 138 36 139 212 168 10 3200
4" BERBKE110L BERBKE110V 210 166 42 160 244 190 10 5400
Double Union Ball Valve Plain Sockets BS / Valvola radiale con manicotti ad incollaggio British Standard
Nominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
E B L Z H C PN Weight (GR)Peso
3/8" BARBKA0160 BARBKA016V 50 51 16 46 78 65 16 140
1/2" BARBKA0200 BARBKA020V 50 51 17 46 78 65 16 140
3/4" BARBKA0250 BARBKA025V 60 58 20 52 90 70 16 200
1" BARBK1A0320 BARBK1A032V 68 65 23 60 104 82 16 300
11/4" BARBK1A0400 BARBK1A040V 80 76 27 68 120 92 16 450
11/2" BARBK1A0500 BARBK1A050V 94 88 31 78 140 105 16 690
2" BARBK1A0630 BARBK1A0a63V 115 104 38 93 169 123 16 1150
21/2" BARBKA0750 BARBKA075V 168 137 44 139 227 168 10 3100
3" BARBKA0900 BARBKA090V 168 138 51 139 242 168 10 3250
4" BARBKA1100 BARBKA110V 210 166 63 160 282 190 10 5500
# Refer to metric equivalent
BK1DEPDM/FPM
BK1AEPDM/FPM
BK1EEPDM/FPM
1
1
2
2
A A
B B
SHEET
Edition "A"
Area:
Part Number:
Polypipe Italia S.r.l.Loc. Pianmercato 5C/5D16044 Monleone di Cicagna (GE)ItalyTel. 0039 0185 92399 r.a.Fax 0039 0185 92699www.polypipeitalia.com
PPPPoooollllyyyyppppiiiippppeeee IIIIttttaaaalllliiiiaaaa
All dimensions inmm unlessotherwise specificied
Designed dy:
Technical Dep.
Toll No:
1Drown Date:
12/2013Scale:
This information is for guidance purposes only and mustnot be reproduced in whole or in part without thepermission of Polypipe Italia.Note: The copyright in this drawing is the property ofPolypipe Italia, and neither the drawing nor any art ofit, nor any information contained therin, shall bereproduced or dislclosed to any third party other than forthe purpose of the use of Polypipe Italia. Copyright2011 Polypipe. All rights reserved.
Projection - third angleunless specified otherwise
WeigHt: (gr)
EFFAST
H
L LZ
C
E
B
D
1
1
2
2
A A
B B
SHEET
Edition "A"
Area:
Part Number:
Polypipe Italia S.r.l.Loc. Pianmercato 5C/5D16044 Monleone di Cicagna (GE)ItalyTel. 0039 0185 92399 r.a.Fax 0039 0185 92699www.polypipeitalia.com
PPPPoooollllyyyyppppiiiippppeeee IIIIttttaaaalllliiiiaaaa
All dimensions inmm unlessotherwise specificied
Designed dy:
Technical Dep.
Toll No:
1Drown Date:
12/2013Scale:
This information is for guidance purposes only and mustnot be reproduced in whole or in part without thepermission of Polypipe Italia.Note: The copyright in this drawing is the property ofPolypipe Italia, and neither the drawing nor any art ofit, nor any information contained therin, shall bereproduced or dislclosed to any third party other than forthe purpose of the use of Polypipe Italia. Copyright2011 Polypipe. All rights reserved.
Projection - third angleunless specified otherwise
WeigHt: (gr)
EFFAST
H
L LZ
C
E
B
D
1
1
2
2
A A
B B
SHEET
Edition "A"
Area:
Part Number:
Polypipe Italia S.r.l.Loc. Pianmercato 5C/5D16044 Monleone di Cicagna (GE)ItalyTel. 0039 0185 92399 r.a.Fax 0039 0185 92699www.polypipeitalia.com
PPPPoooollllyyyyppppiiiippppeeee IIIIttttaaaalllliiiiaaaa
All dimensions inmm unlessotherwise specificied
Designed dy:
Technical Dep.
Toll No:
1Drown Date:
12/2013Scale:
This information is for guidance purposes only and mustnot be reproduced in whole or in part without thepermission of Polypipe Italia.Note: The copyright in this drawing is the property ofPolypipe Italia, and neither the drawing nor any art ofit, nor any information contained therin, shall bereproduced or dislclosed to any third party other than forthe purpose of the use of Polypipe Italia. Copyright2011 Polypipe. All rights reserved.
Projection - third angleunless specified otherwise
WeigHt: (gr)
EFFAST
H
L LZ
C
E
B
D
PVC-u Actuated Valves / Valvole Attuate in PVC-u
60
PVCu manual Ball Valves–Industrial / PVC-U Valvole a Sfera serie “Industria”
Flanged Double Union Solvent Cement / PVC-U Valvola radiale flangiata
Nominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
DNNo
ForiI H E B C L/m ∆p=1bar Weight (GR)
Peso
20 BDRBKF0200 BDRBKF020V 15 4 65 130 95 51 65 190 300
25 BDRBKF0250 BDRBKF025V 20 4 75 150 105 58 70 380 430
32 BDRBKF0320 BDRBKF032V 25 4 85 160 115 65 82 700 620
40 BDRBKF0400 BDRBKF040V 32 4 100 180 140 76 92 1000 920
50 BDRBKF0500 BDRBKF050V 40 4 110 200 150 88 105 1700 1300
63 BDRBKF0630 BDRBKF063V 50 4 125 230 165 104 123 3200 2100
75 BDRBKF0750 BDRBKF075V 65 4 145 290 185 137 168 5000 4200
90 BDRBKF0900 BDRBKF090V 80 8 160 310 200 138 168 7000 4800
110 BDRBKF1100 BDRBKF110V 100 8 180 350 228 166 190 10000 7600
HDPE Spigots for Electrofusion of Butt Weld / Valvola radiale con manicotti in HDPE per saldatura per elettrofusione
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN Weight (GR)Peso
20 BDRBKP0200 50 51 67 46 180 65 16 140
25 BDRBKP0250 60 58 75 52 202 70 16 140
32 BDRBKP0320 68 65 95 60 250 82 16 200
40 BDRBKP0400 80 76 94 68 256 92 16 300
50 BDRBKP0500 94 88 94 78 266 105 16 450
63 BDRBKP0630 115 104 96 93 285 123 16 690
75 BDRBKP0750 168 137 109 139 357 168 10 1150
90 BDRBKP0900 168 138 121 139 381 168 10 3100
110 BDRBKP1100 210 166 128 160 416 190 10 3250
Double Union Ball Valve Metric / Valvola a sfera radiale con Manicotti Incollaggio Metrici
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
16 BDRBXD0160 50 51 16 46 78 65 16 S 140
20 BDRBXD0200 50 51 17 46 78 65 16 S 140
25 BDRBXD0250 60 58 20 52 90 70 16 S 200
32 BDRBXD0320 68 65 23 60 104 82 16 M 300
40 BDRBXD0400 80 76 27 68 120 92 16 M 450
50 BDRBXD0500 94 88 31 78 140 105 16 M 690
63 BDRBXD0630 115 104 38 93 169 123 16 M 1150
75 BDRBXD0750 168 137 44 139 227 168 10 M 3100
90 BDRBXD0900 168 138 51 139 242 168 10 M 3250
110 BDRBXD1100 210 166 63 160 282 190 10 M 5500
# Refer to metric equivalent
BKF
BKP
BXD
61
PVCu Valves / Valvole PVC-U
PVCu manual Ball Valves–Industrial / PVC-U Valvole a Sfera serie “Industria”
Double union, BSP, threaded / Valvola radiale manicotti filettati femmina
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
3/8” BERBXE016A 50 51 16 46 78 65 16 S 140
1/2” BERBXE020B 50 51 17 46 78 65 16 S 140
3/4” BERBXE025C 60 58 20 52 90 70 16 S 200
1” BERBXE032D 68 65 23 60 104 82 16 M 300
11/4” BERBXE040E 80 76 27 68 120 92 16 M 450
11/2” BERBXE050F 94 88 31 78 140 105 16 M 690
2” BERBXE063G 115 104 38 93 169 123 16 M 1150
21/2” BERBXE075H 168 137 44 139 227 168 10 M 3100
3” BERBXE090I 168 138 51 139 242 168 10 M 3250
4” BERBXE110L 210 166 63 160 282 190 10 M 5500
Double Union Ball Valve with Solvent Cement Sockets EPDM Seals / Valvola radiale con manicotti British Standard e guarnizioni in EPDM
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
3/8” BSPF BARBXA0160 50 51 16 46 78 65 16 S 140
1/2” BSPF BARBXA0200 50 51 17 46 78 65 16 S 140
3/4” BSPF BARBXA0250 60 58 20 52 90 70 16 S 200
1” BSPF BARBXA0320 68 65 23 60 104 82 16 M 300
11/4” BSPF BARBXA0400 80 76 27 68 120 92 16 M 450
11/2” BSPF BARBXA0500 94 88 31 78 140 105 16 M 690
2” BSPF BARBXA0630 115 104 38 93 169 123 16 M 1150
21/2” BSPF BARBXA0750 168 137 44 139 227 168 10 M 3100
3” BSPF BARBXA0900 168 138 51 139 242 168 10 M 3250
4” BSPF BARBXA1100 210 166 63 160 282 190 10 M 5500
Flanged Double Union Solvent Cement / Valvola radiale flangiata
Nominal SizeMisura nominale
CodeCodice
DNNo
ForiI H E B C L/m ∆p=1bar Weight (GR)
Peso
20 BXF0200 15 4 65 130 95 51 65 190 300
25 BXF0250 20 4 75 150 105 58 70 380 430
32 BXF0320 25 4 85 160 115 65 82 700 620
40 BXF0400 32 4 100 180 140 76 92 1000 920
50 BXF0500 40 4 110 200 150 88 105 1700 1300
63 BXF0630 50 4 125 230 165 104 123 3200 2100
75 BXF0750 65 4 145 290 185 137 168 5000 4200
90 BXF0900 80 8 160 310 200 138 168 7000 4800
110 BXF1100 100 8 180 350 228 166 190 10000 7600
# Refer to metric equivalent
BXF
BXA
BXE
62
PVCu manual Ball Valves–Industrial / PVC-U Valvole a Sfera serie “Industria”
HDPE Spigots for Electrofusion of Butt Weld / Valvola radiale con manicotti in HDPE per saldatura per elettrofusione
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN
20 BDRBXP0200 50 51 67 46 180 65 16
25 BDRBXP0250 60 58 75 52 202 70 16
32 BDRBXP0320 68 65 95 60 250 82 16
40 BDRBXP0400 80 76 94 68 256 92 16
50 BDRBXP0500 94 88 94 78 266 105 16
63 BDRBXP0630 115 104 96 93 285 123 16
75 BDRBXP0750 168 137 109 139 357 168 10
90 BDRBXP0900 168 138 121 139 381 168 10
110 BDRBXP1100 210 166 128 160 416 190 10
Single Union Metric / Valvola monoghiera con manicotti ad incollaggio metrici
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
20 BDRSXD0200 50 51 17 46 78 65 16 S 140
25 BDRSXD0250 60 58 20 52 90 70 16 S 200
32 BDRSXD0320 68 65 23 60 104 82 16 S 300
40 BDRSXD0400 80 76 27 68 120 92 16 M 450
50 BDRSXD0500 94 88 31 78 140 105 16 S 690
63 BDRSXD0630 115 104 38 93 169 123 16 M 1150
75 BDRSXD0750 168 137 44 139 227 168 10 M 3100
90 BDRSXD0900 168 138 51 139 242 168 10 M 3250
110 BDRSXD1100 210 166 63 160 282 190 10 M 5500
Single union, BSP threaded / Valvola monoghiera con manicotti filettati femmina
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
1/2” BERSXE020B 50 51 16 46 78 65 16 S 140
3/4” BERSXE025C 60 58 19 52 90 70 16 S 200
1” BERSXE032D 68 65 22 60 104 82 16 S 300
11/4” BERSXE040E 80 76 26 68 120 92 16 M 450
11/2” BERSXE050F 94 88 31 78 140 105 16 S 690
2” BERSXE063G 115 104 38 93 169 123 16 M 1150
21/2” BERSXE075H 168 137 44 139 227 168 10 M 3100
3” BERSXE090I 168 138 51 139 242 168 10 M 3250
4” BERSXE110L 210 166 61 160 282 190 10 M 5500
# Refer to metric equivalent
BXP
SXD
SXE
63
PVCu Valves / Valvole PVC-U
PVCu manual Ball Valves–Water / Valvole a Sfera Serie “Acqua”
Double Union Ball Valve Plain Sockets EPDM Seals / Valvola radiale con manicotti incollaggio British Standard e guarnizioni in EPDM
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
3/8" BARBVA0160 50 51 16 46 78 65 16 S 140
1/2" BARBVA0200 50 51 17 46 78 65 16 S 140
3/4" BARBVA0250 60 58 20 52 90 70 16 S 200
1" BARBVA0320 68 65 23 60 104 82 16 M 300
11/4" BARBVA0400 80 76 27 68 120 92 16 M 450
11/2" BARBVA0500 94 88 31 78 140 105 16 M 690
2" BARBVA0630 115 104 38 93 169 123 16 M 1150
21/2" BARBVA0750 168 137 44 139 227 168 10 M 3100
3" BARBVA0900 168 138 51 139 242 168 10 M 3250
4" BARBVA1100 210 166 63 160 282 190 10 M 5500
Double Union Ball Valve Plain Sockets EPDM Seals Metric / Valvola radiale con manicotti incollaggio metrici e guarnizioni in EPDM
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
16 BDRBVD0160 50 51 16 46 78 65 16 S 140
20 BDRBVD0200 50 51 16 46 78 65 16 S 140
25 BDRBVD0250 60 58 19 52 90 70 16 S 200
32 BDRBVD0320 68 65 22 60 104 82 16 M 300
40 BDRBVD0400 80 76 26 68 120 92 16 M 450
50 BDRBVD0500 94 88 31 78 140 105 16 M 690
63 BDRBVD0630 115 104 38 93 169 123 16 M 1150
75 BDRBVD0750 168 137 44 139 227 168 10 M 3100
90 BDRBVD0900 168 138 51 139 242 168 10 M 3250
110 BDRBVD1100 210 166 61 160 282 190 10 M 5500
Double Union Ball Valve BSP Female Threaded Sockets EPDM Seals / Valvola radiale con manicotti filettati femmina e guarnizioni in EPDM
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
3/8" BERBVE016A 50 51 16 46 78 65 16 S 140
1/2" BERBVE020B 60 58 19 52 90 70 16 S 140
3/4" BERBVE025C 68 65 22 60 104 82 16 S 200
1" BERBVE032D 80 76 26 68 120 92 16 M 300
11/4" BERBVE040E 94 88 31 78 140 105 16 M 450
11/2" BERBVE050F 115 104 38 93 169 123 16 M 690
2" BERBVE063G 168 137 44 139 227 168 10 M 1150
21/2" BERBVE075H 168 138 51 139 242 168 10 M 3050
3" BERBVE090I 210 166 61 160 282 190 10 M 3200
4" BERBVE110L 210 166 42 160 244 190 10 M 5400
Double Union ASTM / Valvola radiale con manicotti ASTM e guarnizioni in EPDM
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
20 BSRBVS0200 50 51 16 46 78 65 16 S 140
25 BSRBVS0250 60 58 19 52 90 70 16 S 200
32 BSRBVS0320 68 65 22 60 104 82 16 M 300
40 BSRBVS0400 80 76 26 68 120 92 16 M 450
50 BSRBVS0500 94 88 31 78 140 105 16 M 690
63 BSRBVS0630 115 104 38 93 169 123 16 M 1150
75 BSRBVS0750 168 137 44 139 227 168 10 M 3050
90 BSRBVS0900 168 138 51 139 242 168 10 M 3200
110 BSRBVS1100 210 166 61 160 282 190 10 M 5400
# Refer to metric equivalent
BVA
BVD
BVE
BVS
64
PVCu manual Ball Valves–Water / Valvole a Sfera Serie “Acqua”
Double Union NPT Threaded / Valvola radiale con manicotti filettati NPT e guarnizioni in EPDM
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
20 BNRBVN020B 50 51 16 46 78 65 16 S 140
25 BNRBVN025C 60 58 19 52 90 70 16 S 200
32 BNRBVN032D 68 65 22 60 104 82 16 M 300
40 BNRBVN040E 80 76 26 68 120 92 16 M 450
50 BNRBVN050F 94 88 31 78 140 105 16 M 690
63 BNRBVN063G 115 104 38 93 169 123 16 M 1150
75 BNRBVN075H 168 137 44 139 227 168 10 M 3050
90 BNRBVN090I 168 138 51 139 242 168 10 M 3200
110 BNRBVN110L 210 166 61 160 282 190 10 M 5400
Double Union JIS / Valvola radiale con manicotti JIS e guarnizioni in EPDM
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
20 BJRBVJ0200 50 51 16 46 78 65 16 S 140
25 BJRBVJ0250 60 58 19 52 90 70 16 S 200
32 BJRBVJ0320 68 65 22 60 104 82 16 M 300
40 BJRBVJ0400 80 76 26 68 120 92 16 M 450
50 BJRBVJ0500 94 88 31 78 140 105 16 M 690
63 BJRBVJ0630 115 104 38 93 169 123 16 M 1150
75 BJRBVJ0750 168 137 44 139 227 168 10 M 3050
90 BJRBVJ0900 168 138 51 139 242 168 10 M 3200
110 BJRBVJ1100 210 166 61 160 282 190 10 M 5400
Single union BS / Valvola monoghiera con manicotti British Standard a incollaggio Guarnizioni in EPDM
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
1/2" BARSVA0200 50 51 17 46 78 65 16 S 140
3/4" BARSVA0250 60 58 20 52 90 70 16 M 200
1" BARSVA0320 68 65 23 60 104 82 16 M 300
11/4" BARSVA0400 80 76 27 68 120 92 16 M 450
11/2" BARSVA0500 94 88 31 78 140 105 16 M 690
2" BARSVA0630 115 104 38 93 169 123 16 M 1150
21/2" BARSVA0750 168 137 44 139 227 168 10 M 3100
3" BARSVA0900 168 138 51 139 242 168 10 M 3250
4" BARSVA1100 210 166 63 160 282 190 10 M 5500
Single Union Ball Valve Plain Sockets EPDM Seals / Valvola monoghiera con manicotti metrici a incollaggio Guarnizioni in EPDM
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
20 BDRSVD0200 50 51 16 46 78 65 16 S 140
25 BDRSVD0250 60 58 19 52 90 70 16 M 200
32 BDRSVD0320 68 65 22 60 104 82 16 M 300
40 BDRSVD0400 80 76 26 68 120 92 16 M 450
50 BDRSVD0500 94 88 31 78 140 105 16 M 690
63 BDRSVD0630 115 104 38 93 169 123 16 M 1150
75 BDRSVD0750 168 137 44 139 227 168 10 M 3100
90 BDRSVD0900 168 138 51 139 242 168 10 M 3250
110 BDRSVD1100 210 166 61 160 282 190 10 M 5500
# Refer to metric equivalent
BVN
BVJ
SVA
SVD
65
PVCu Valves / Valvole PVC-U
PVCu manual Ball Valves–Water / Valvole a Sfera Serie “Acqua”
Single Union Ball Valve BSP Female Threaded Sockets EPDM Seals / Valvola monoghiera con attacchi filettati Femmina con guarnizioni in EPDM
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
1/2" BERSVE020B 50 51 16 46 78 65 16 S 140
3/4" BERSVE025C 60 58 19 52 90 70 16 M 200
1" BERSVE032D 68 65 22 60 104 82 16 M 300
11/4" BERSVE040E 80 76 24 68 116 92 16 M 450
11/2" BERSVE050F 94 88 24 78 126 105 16 M 690
2" BERSVE063G 115 104 28 93 149 123 16 M 1150
21/2" BERSVE075H 168 137 33 139 205 168 10 M 3050
3" BERSVE090I 168 138 36 139 212 168 10 M 3200
4" BERSVE110L 210 166 42 160 244 190 10 M 5400
Single union, BSP, threaded M-F / Valvola monoghiera con attacchi filettati maschio e femmina con guarnizioni in EPDM
Nominal SizeMisura nominale
CodeCodice
DN L Z H E B C PackImballo
Weight (GR)Peso
SVQ 20 x 1/2” BQRSVQ020B 15 16 55 71 50 51 65 S 140
25 x 3/4” BQRSVQ025C 20 19 61 80 60 58 70 S 200
32 x 1” BQRSVQ032D 25 22 68 90 68 65 82 M 300
40 x 11/4” BQRSVQ040E 32 24 84 108 80 76 92 M 450
50 x 11/2” BQRSVQ050F 40 24 97 121 94 88 105 M 690
63 x 2” BQRSVQ063G 50 28 119 147 115 104 123 M 1150
Single union, BSP, threaded M-F / Single union Ball Valve plain Socket/Compression joint - Valvola monoghiera con manicotti metrici ad incollaggio e attacco a compressione
Nominal SizeMisura nominale
CodeCodice
E B L Z H C PN PackImballo
Weight (GR)Peso
C
B
DN E
LZH
20 x 1/2” BERSGE020B 50 51 16 46 106 65 16 M 129
25 x 3/4” BERSGE025C 60 58 19 52 118 70 16 M 202
32 x 1” BERSGE032D 68 65 22 60 135 82 16 M 298
# Refer to metric equivalent
PVCu check valves / PVC-U Valvole di non ritornoMaximum working pressure for valves 16–63 (1/2”–2”) 16 bar (232 psi), for valves 75–110 (21/2”–4”) 10 bar (145 psi) at 20°C Pressione di esercizio ammissibile per valvole 16-63 (1/2”-2”) 16 bar (232 psi), 75-110 (2 ½”-4”) 10 bar (145 psi) a 20°C
Check Valve Plain Sockets with Stainless Steel Spring Seals BS / Valvola di non ritorno radiale con attacchi BS a incollaggio e molla in acciaio inox
Nominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
E Z H PackImballo
Weight (GR)Peso
1/2" CARCVA0200 CARCVA0200V 17 46 78 S 110
3/4" CARCVA0250 CARCVA0250V 20 52 90 S 180
1" CARCVA0320 CARCVA0320V 23 60 104 M 250
11/4" CARCVA0400 CARCVA0400V 27 68 120 M 380
11/2" CARCVA0500 CARCVA0500V 31 78 140 M 600
2" CARCVA0630 CARCVA0630V 38 93 169 M 1000
21/2" CARCVA0750 CARCVA0750V 44 139 227 M 2800
3" CARCVA0900 CARCVA0900V 51 139 242 M 3000
4” CARCVA1100 CARCVA1100V 61 160 282 M 5000
# Refer to metric equivalent
SVE
SGE
CVAEPDM/FPM
66
PVCu check valves / PVC-U Valvole di non ritornoMaximum working pressure for valves 16–63 (1/2”–2”) 16 bar (232 psi), for valves 75–110 (21/2”–4”) 10 bar (145 psi) at 20°C Pressione di esercizio ammissibile per valvole 16-63 (1/2”-2”) 16 bar (232 psi), 75-110 (2 ½”-4”) 10 bar (145 psi) a 20°C
Check Valve Plain Sockets with Stainless Steel Spring Seals Metric Valvola di non ritorno radiale con attacchi Metrici a incollaggio e molla in acciaio inox con Guarnizioni EPDMNominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
L Z H PackImballo
Weight (GR)Peso
20 CDRCVD0200 CDRCVD020V 16 46 78 S 110
25 CDRCVD0250 CDRCVD025V 19 52 90 S 180
32 CDRCVD0320 CDRCVD032V 22 60 104 M 250
40 CDRCVD0400 CDRCVD040V 26 68 120 M 380
50 CDRCVD0500 CDRCVD050V 31 78 140 M 600
63 CDRCVD0630 CDRCVD063V 38 93 169 M 1000
75 CDRCVD0750 CDRCVD075V 44 139 227 M 2800
90 CDRCVD0900 CDRCVD090V 51 139 242 M 3000
110 CDRCVD1100 CDRCVD110V 61 160 282 M 5000
Check Valve BSP Female Threaded Sockets with Stainless Steel Spring Seals BS Valvola di non ritorno radiale con attacchi filettati femmina e molla in acciaio inox con Guarnizioni EPDMNominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
L Z H PackImballo
Weight (GR)Peso
1/2" CERCVE020B CERCVE020V 16 46 78 S 110
3/4" CERCVE025C CERCVE025V 19 52 90 S 180
1" CERCVE032D CERCVE032V 22 60 104 M 250
11/4" CERCVE040E CERCVE040V 24 68 116 M 380
11/2" CERCVE050F CERCVE050V 24 78 126 M 600
2" CERCVE063G CERCVE063V 28 93 149 M 1000
21/2" CERCVE075H CERCVE075V 33 139 205 M 2800
3" CERCVE090I CERCVE090V 36 139 212 M 3000
4” CERCVE110L CERCVE110V 42 160 244 M 5000
Check Valve Plain Sockets with PTFE Coated Spring Seals BSValvola di non ritorno radiale con attacchi BS a incollaggio e molla rivestita in PTFE con Guarnizioni EPDMNominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
L Z H PackImballo
Weight (GR)Peso
1/2" CARCVAT0200 CARCVAT020V 17 46 78 S 110
3/4" CARCVAT0250 CARCVAT025V 20 52 90 S 180
1" CARCVAT0320 CARCVAT032V 23 60 104 M 250
11/4" CARCVAT0400 CARCVAT040V 27 68 120 M 380
11/2" CARCVAT0500 CARCVAT050V 31 78 140 M 600
2" CARCVAT0630 CARCVAT063V 38 93 169 M 1000
21/2" CARCVAT0750 CARCVAT075V 44 139 227 M 2800
3" CARCVAT0900 CARCVAT090V 51 139 242 M 3000
Check Valve Plain Sockets with PTFE Coated Spring Seals MetricValvola di non ritorno radiale con attacchi Metrici a incollaggio e molla rivestita in PTFE con Guarnizioni EPDMNominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
L Z H PackImballo
Weight (GR)Peso
20 CDRCVDT0200 CDRCVDT020V 16 46 78 S 110
25 CDRCVDT0250 CDRCVDT025V 19 52 90 S 180
32 CDRCVDT0320 CDRCVDT032V 22 60 104 M 250
40 CDRCVDT0400 CDRCVDT040V 26 68 120 M 380
50 CDRCVDT0500 CDRCVDT050V 31 78 140 M 600
63 CDRCVDT0630 CDRCVDT063V 38 93 169 M 1000
75 CDRCVDT0750 CDRCVDT075V 44 139 227 M 2800
90 CDRCVDT0900 CDRCVDT090V 51 139 242 M 3000
# Refer to metric equivalent
CVDEPDM/FPM
CVEEPDM/FPM
CVA-TEPDM/FPM
CVD-TEPDM/FPM
67
PVCu Valves / Valvole PVC-U
PVCu check valves / PVC-U Valvole di non ritornoMaximum working pressure for valves 16–63 (1/2”–2”) 16 bar (232 psi), for valves 75–110 (21/2”–4”) 10 bar (145 psi) at 20°C Pressione di esercizio ammissibile per valvole 16-63 (1/2”-2”) 16 bar (232 psi), 75-110 (2 ½”-4”) 10 bar (145 psi) a 20°C
Check Valve BSP Female Threaded Sockets with PTFE Coated Spring SealsValvola di non ritorno radiale con attacchi filettati femmina e molla rivestita in PTFE con Guarnizioni EPDMNominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
L Z H PackImballo
Weight (GR)Peso
1/2" CERCVET020B CERCVET020V 16 46 78 S 110
3/4" CERCVET025C CERCVET025V 19 52 90 S 180
1" CERCVET032D CERCVET032V 22 60 104 M 250
11/4" CERCVET040E CERCVET040V 24 68 116 M 380
11/2" CERCVET050F CERCVET050V 24 78 126 M 600
2" CERCVET063G CERCVET063V 28 93 149 M 1000
21/2" CERCVET075H CERCVET075V 33 139 205 M 2800
3" CERCVET090I CERCVET090V 36 139 212 M 3000
# Refer to metric equivalent
PVCu air release valves / PVC-U Valvole sfogo ariaMaximum working pressure for valves 16–63 (1/2”–2”) 16 bar (232 psi), for valves 75–110 (21/2”–4”) 10 bar (145 psi) at 20°CPressione di esercizio ammissibile per valvole 16-63 (1/2”-2”) 16 bar (232 psi), 75-110 (2 ½”-4”) 10 bar (145 psi) a 20°C
Air Release Valve Plain Sockets with EPDM Seals BS / Valvola sfogo aria radiale con manicotti a incollaggio BS con Guarnizioni EPDM
Nominal SizeMisura nominale
CodeCodice L Z H Weight (GR)
Peso
1/2" CARAVA0200 17 46 78 110
3/4" CARAVA0250 20 52 90 180
1" CARAVA0320 23 60 104 250
11/4" CARAVA0400 27 68 120 380
11/2" CARAVA0500 31 78 140 600
2" CARAVA0630 38 93 169 1000
21/2" CARAVA0750 44 139 227 2800
3" CARAVA0900 51 139 242 3000
4” CARAVA1100 61 160 282 5000
Air Release Valve Plain Sockets with EPDM Seals Metric / Valvola sfogo aria radiale con manicotti a incollaggio Metrici con Guarnizioni EPDM
Nominal SizeMisura nominale
CodeCodice L Z H Weight (GR)
Peso
20 CDRAVD0200 16 46 78 110
25 CDRAVD0250 19 52 90 180
32 CDRAVD0320 22 60 104 250
40 CDRAVD0400 26 68 120 380
50 CDRAVD0500 31 78 140 600
63 CDRAVD0630 38 93 169 1000
75 CDRAVD0750 44 139 227 2800
90 CDRAVD0900 51 139 242 3000
110 CDRAVD1100 61 160 282 5000
Air Release Valve BSP Female Threaded Sockets with EPDM Seals / Valvola sfogo aria radiale con manicotti filettati femmina con Guarnizioni EPDM
Nominal SizeMisura nominale
CodeCodice L Z H Weight (GR)
Peso
1/2" CERAVE020B 16 46 78 110
3/4" CERAVE025C 19 52 90 180
1" CERAVE032D 22 60 104 250
11/4" CERAVE040E 24 68 116 380
11/2" CERAVE050F 24 78 126 600
2" CERAVE063G 28 93 149 1000
21/2" CERAVE075H 33 139 205 2800
3" CERAVE090I 36 139 212 3000
4” CERAVE110L 42 160 244 5000
# Refer to metric equivalent
CVE-TEPDM/FPM
AVA
AVD
AVE
68
PVCu foot valves / Valvole di Fondo
Double union, metric solvent cementing / Valvola radiale di fondo con manicotti a incollaggio Metrici
Nominal SizeMisura nominale
CodeCodice
L Z H PackImballo
Weight (GR)Peso
20 CDRHVD0200 16 46 78 S 110
25 CDRHVD0250 19 52 90 S 180
32 CDRHVD0320 22 60 104 M 250
40 CDRHVD0400 26 68 120 M 380
50 CDRHVD0500 31 78 140 M 600
63 CDRHVD0630 38 93 169 M 1000
75 CDRHVD0750 44 139 227 M 2800
90 CDRHVD0900 51 139 242 M 3000
110 CDRHVD1100 61 160 282 M 5000
Double union, BSP, threaded / Valvola radiale di fondo con manicotti Filettati BSP
Nominal SizeMisura nominale
CodeCodice
L Z H PackImballo
Weight (GR)Peso
1/2” CERHVE020B 16 46 78 S 110
3/4” CERHVE025C 19 52 90 S 180
1” CERHVE032D 22 60 104 M 250
1 1/4” CERHVE040E 24 68 116 M 380
11/2” CERHVE050F 24 78 126 M 600
2” CERHVE063G 28 93 149 M 1000
21/2” CERHVE075H 33 139 205 M 2800
3” CERHVE090I 36 139 212 M 3000
4” CERHVE110L 42 160 244 M 5000
Double union, BS, solvent cementing / Valvola radiale di fondo con manicotti a incollaggio BS
Nominal SizeMisura nominale
CodeCodice
L Z H PackImballo
Weight (GR)Peso
1/2” CARHVA0200 17 46 78 S 110
3/4” CARHVA0250 20 52 90 S 180
1” CARHVA0320 23 60 104 M 250
11/4” CARHVA0400 27 68 120 M 380
11/2” CARHVA0500 31 78 140 M 600
2” CARHVA0630 38 93 169 M 1000
21/2” CARHVA0750 44 139 227 M 2800
3” CARHVA0900 51 139 242 M 3000
4” CARHVA1100 61 160 282 M 5000
Strainer (HVD - HVE) / Filtro (HVD – HVE)
Nominal SizeMisura nominale
CodeCodice
Weight (GR)Peso
1/2” CDRZVD0200 4
3/4” CDRZVD0250 7
1” CDRZVD0320 9
11/4” CDRZVD0400 14
11/2” CDRZVD0500 17
2” CDRZVD0630 28
21/2” CDRZVD0750 89
3” CDRZVD0900 110
4” CDRZVD1100 123
# Refer to metric equivalent
HVD
HVE
HVA
ZVD
69
PVCu Valves / Valvole PVC-U
PVCu in line strainers / Filtri in linea PVC-UMaximum working pressure for valves 6 bar (90 psi), at 20°CPressione di esercizio ammissibile per valvole 6 bar (90 psi), a 20°C
Ball check valve / Valvola di non ritorno a palla
Nominal SizeMisura nominale
CodeCodice
A mm B C D Weight (GR)Peso
1” CERCPE032D 26/34 207 114 65.5 500
11/4” CERCPE040E 33/42 143 114 65.5 400
11/2” CERCPE050F 40/49 154 135 80 1000
2” CERCPE063G 50/60 179 160 88.5 800
21/2” CERCPE075H 66/76 198 189 110 1600
3” CERCPE090I 80/90 276 225 133 2800
# Refer to metric equivalent
PVCu swing check valve / Valvole a Clapet
O rings EPDM / O’ring EPDM
Nominal SizeMisura nominale
CodeCodice
Inch DN C i S PN6 PN10 Nr. Dimension / Dimensioni PN Weight (GR)Peso
75 CDRCKD0750 2½” 65 46 145 20 80° 75° 4 16 x 120 10 302
90 CDRCKD0900 3” 80 58 160 20 80° 77° 4 16 x 120 10 392
110 CDRCKD1100 4” 100 74 190 23 79° 76° 8 16 x 120 10 541
140 CDRCKD1400 5” 125 94 210 25 80 76° 8 16 x 130 10 759
160 CDRCKD1600 6” 150 112 240 30 77 75° 8 20 x 160 6 1075
# Refer to metric equivalent
PVCU 3 WAY BALL VALVES / PVC-U VALVOLA A SFERA A 3 VIEMaximum working pressure: 10 bar (145 psi) at 20°C / Pressione di esercizio ammissibile 10 bar (145 psi) a 20°C
3 Way Ball Valve L Port O Rings Plain Ends / Valvola a Sfera a 3 Vie L con manicotti a incollaggio Metrico con O’ring EPDM/FPM
Nominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
G L L1 A Z t D H B Y C PN
25 BDRBTD025L BDRBTE025L 3/4” 120 126 20 70 81.5 51.5 63 60 16
32 BDRBTD032L BDRBTE032L 1” 200 206 120 127 22.5 70 81.5 51.5 63.5 60 16
50 BDRBTD050L BDRBTE050L 11/2” 261 267 162 171 31.5 101 107.5 73 85.5 81 16
63 BDRBTD063L BDRBTE063L 2” 296 302 181 193 38.5 121.5 116.5 85 96.5 90.5 16
# Refer to metric equivalent
CPE
CKD
BTD-L EPDM
BTE-L FPM
Bolts / Bulloniα
70
PVCU 3 WAY BALL VALVES / PVC-U VALVOLA A SFERA 3 VIE T, MANICOTTI METRICIMaximum working pressure: 10 bar (145 psi) at 20°C / Pressione di esercizio ammissibile 10 bar (145 psi) a 20°C
3 Way Ball Valve T Port O Rings Plain Ends / Valvola a Sfera a 3 Vie T con manicotti a incollaggio Metrico con O’ring EPDM/FPM
Nominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
D L L1 A Z t D H B Y C PN
25 BDRBTD025T BDRBTE025T 3/4” 120 126 20 70 81.5 51.5 63 60 16
32 BDRBTD032T BDRBTE032T 1” 200 206 120 127 22.5 70 81.5 51.5 63.5 60 16
50 BDRBTD050T BDRBTE050T 11/2” 261 267 162 171 31.5 101 107.5 73 85.5 81 16
63 BDRBTD063T BDRBTE063T 2” 296 302 181 193 38.5 121.5 116.5 85 96.5 90.5 16
# Refer to metric equivalent
PVCu butterfly valves–economy/industrial / Valvole a farfalla serie economica / industriaMaximum working pressure: 63—140mm (2”—5”): 10 bar (145 psi) at 20°CPressione di esercizio ammissibile: 63 – 140 (2”-5”): 10 bar (145 psi) a 20°C. D a160-315 (6”-8”) 6 bar (90 PSI) a 20°C
Butterfly Valve–Economy Hand Operated EPDM Seals / Valvola a farfalla manuale con O’ring EPDM
mm Inches CodeCodice DN A B C E S G f l m Weight (GR)
Peso
63-75 2-21/2" FDRFVD0750 50-65 2-2½ 129.5 165 110 27.5 45 10 18 125 228 1770
90 3" FDRFVD0900 80 3" 233 130 123 31 57 11 18 160 240 2050
110 4" FDRFVD1100 100 4" 253 152 143 31 58 11 18 180 240 2290
125 5” FDRFVD1250 125 5" 264 170 148 31 62 11 18 190 240 2700
140 5" FDRFVD1400 125 5" 284 185 159 31 63 11 18 210 240 2960
160 6" FDRFVD1600 150 6" 312 216 169 31 73 14 22 240 340 3730
200 8" FDRFVD2000 200-225 8" 370 273 200 31 83 14 22 295 340
225 10” FDRFVD2250 200 8" 370 273 200 31 83 14 22 295 340 5700
250 10” FDRFVD2500 250 10” 570 321 - - 108 - 22 350 340 9982
315 12” FDRFVD3150 315 12” 695 370 - - 131 - 22 400 340 22000
# Refer to metric equivalent
BTD-T EPDM
BTE-T FPM
FVD
PVCU 3 WAY BALL VALVES / PVC-U VALVOLA A SFERA 3 VIE L, MANICOTTI BSMaximum working pressure: 10 bar (145 psi) at 20°C / Pressione di esercizio ammissibile 10 bar (145 psi) a 20°C
3 Way Ball Valve L Port O Rings Plain Ends / Valvola a Sfera a 3 Vie L con Manicotti a Incollaggio BS
Nominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
G L L1 A Z t D H B Y C PN
25 BDRBTD025L BDRBTE025L 3/4” 120 126 20 70 81.5 51.5 63 60 16
32 BDRBTD032L BDRBTE032L 1” 200 206 120 127 22.5 70 81.5 51.5 63.5 60 16
50 BDRBTD050L BDRBTE050L 11/2” 261 267 162 171 31.5 101 107.5 73 85.5 81 16
63 BDRBTD063L BDRBTE063L 2” 296 302 181 193 38.5 121.5 116.5 85 96.5 90.5 16
# Refer to metric equivalent
BTA-L EPDM
BTE-L FPM
PVCu 3 way ball valves / PVC-u Valvola a sfera 3 vie T, manicotti BSMaximum working pressure: 10 bar (145 psi) at 20°C / Pressione di esercizio ammissibile 10 bar (145 psi) a 20°C
3 Way Ball Valve T Port Plain BS O Rings Plain Ends / Valvola a Sfera a 3 Vie T con Manicotti a Incollaggio BS
Nominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
D L L1 A Z t D H B Y C PN
3/4" BARBTA025T BARBTE025T 3/4" 120 126 20 70 81.5 51.5 63 60 16
1" BARBTA032T BARBTE032T 1" 200 206 120 127 22.5 70 81.5 51.5 63.5 60 16
11/2" BARBTA050T BARBTE050T 11/2" 261 267 162 171 31.5 101 107.5 73 85.5 81 16
2" BARBTA063T BARBTE063T 2" 296 302 181 193 38.5 121.5 116.5 85 96.5 90.5 16
# Refer to metric equivalent
BTA-T EPDM
BTE-TFPM
71
PVCu Valves / Valvole PVC-U
PVCu butterfly valves–economy/industrial / Valvole a farfalla serie economica / industriaMaximum working pressure: 63-140mm ( 2”-5”) 10 Bar (145PSI) at 20ºC and 160-315mm ( 6” and 8”) 6 Bar (90PSI) at 20ºCPressione di esercizio ammissibile: 63 – 140 (2”-5”): 10 bar (145 psi) a 20°C. D a160-315 (6”-8”) 6 bar (90 PSI) a 20°C
Butterfly Valve–Economy Hand Operated FPM Seals / Valvola a farfalla manuale con O’ring FPM
mm Inches CodeCodice DN A B C E S G f l m Weight (GR)
Peso
75 2-21/2" FDRFVD075V 50-65 2-2½ 129.5 165 110 27.5 45 10 18 125 228 1770
90 3" FDRFVD090V 80 3" 233 130 123 31 57 11 18 160 240 2050
110 4" FDRFVD110V 100 4" 253 152 143 31 58 11 18 180 240 2290
125 5” FDRFVD125V 125 5" 264 170 148 31 62 11 18 190 240 2700
140 5" FDRFVD140V 125 5" 284 185 159 31 63 11 18 210 240 2960
160 6" FDRFVD160V 150 6" 312 216 169 31 73 14 22 240 340 3730
200 8" FDRFVD200V 200-225 8" 370 273 200 31 83 14 22 295 340
225 10” FDRFVD225V 200 8" 370 273 200 31 83 14 22 295 340 5700
250 10” FDRFVD250V 250 10” 570 321 - - 108 - 22 350 340 9982
315 12” FDRFVD315V 315 12” 695 370 - - 131 - 22 400 340 22000
# Refer to metric equivalent
PVCu butterfly valves–economy/industrial / Valvole a farfalla serie economica / industriaMaximum working pressure: 63-140mm ( 2”-5”) 10 Bar (145PSI) at 20ºC and 160-315mm ( 6” and 8”) 6 Bar (90PSI) at 20ºCPressione di esercizio ammissibile: 63 – 140 (2”-5”): 10 bar (145 psi) a 20°C. D a160-315 (6”-8”) 6 bar (90 PSI) a 20°C
Butterfly Valve–Complete EPDM O rings / Valvola a farfalla assemblata con O’ring EPDM
mm Inches CodeCodice DN A C E S G L N Weight (GR)
Peso
75 21/2" FDRFVF0750 50-65 2-2½ 129.5 110 27.5 45 10 47 154 3000
90 3" FDRFVF0900 80 3" 233 123 31 57 11 56 169 4270
110 4" FDRFVF1100 100 4" 253 143 31 58 11 66 190 5000
125 5” FDRFVF1250 125 5" 264 148 31 62 11 78 218 6000
140 5" FDRFVF1400 125 5" 284 159 31 63 11 84 231 6800
160 6" FDRFVF1600 150 6" 312 169 31 73 14 92 257 8600
200 8" FDRFVF2000 200 8" 370 200 31 83 14 113 309 13600
225 10” FDRFVF2250 200 8" 370 200 31 83 14 126 335 14000
250 10” FDRFVF2500 250 10" 570 - - - - - 363 21235
315 12” FDRFVF3150 315 12” 695 - - - - - 482 42590
Butterfly Valve–Complete FPM O rings / Valvola a farfalla assemblata con O’ring FPM
mm Inches CodeCodice DN A C E S G L N Weight (GR)
Peso
75 21/2" FDRFVF063V 50-65 2-2½ 129.5 110 27.5 45 10 47 154 3000
90 3" FDRFVF090V 80 3" 233 123 31 57 11 56 169 4270
110 4" FDRFVF110V 100 4" 253 143 31 58 11 66 190 5000
125 5” FDRFVF125V 125 5" 264 148 31 62 11 78 218 6000
140 5" FDRFVF140V 125 5" 284 159 31 63 11 84 231 6800
160 6" FDRFVF160V 150 6" 312 169 31 73 14 92 257 8600
200 8" FDRFVF200V 200 8" 370 200 31 83 14 113 309 13600
225 10” FDRFVF225V 200 8" 370 200 31 83 14 126 335 14000
250 10” FDRFVF250V 250 10" 570 - - - - - 363 21235
315 12” FDRFVF315V 315 12” 695 - - - - - 482 42590
# Refer to metric equivalent
FVD-V
FVF
FVF-V
72
PVCu Electrically Actuated Double Union Ball Valves / PVC-U Valvola a sfera radiale con attuatore pneumatico(220–240 volt) (110 volt)
Electrically actuated double union ball valve–plain sockets EPDM sealsValvola a sfera radiale con manicotti ad incollaggio a comando elettrico – EBK guarnizioni in EPDMNominal SizeMisura nominale
Code / Codice12/24v
Code / Codice 85/240v D Weight (GR)
Peso
16 BDREBKJA0160 BDREBKYA0160 3/8” 1840
20 BDREBKJA0200 BDREBKYA0200 1/2” 1840
25 BDREBKJA0250 BDREBKYA0250 3/4” 1900
32 BDREBK1JA0320 BDREBK1YA0320 1” 1900
40 BDREBK1JA0400 BDREBK1YA0400 11/4” 2050
50 BDREBK1JA0500 BDREBK1YA0500 11/2” 2250
63 BDREBK1JA0630 BDREBK1YA0630 2” 2650
75 BDREBKJA0750 BDREBK0750 21/2” 5400
90 BDREBKJA0900 BDREBKYA0900 3“ 8000
110 BDREBKJA1100 BDREBKYA1100 4” 8000
# Refer to metric equivalent
PVCu Pneumatically Actuated Double Union Ball Valves Fail Safe ClosedValvola a Sfera Radiale Attuatore Pneumatico
Double Acting / Valvola a sfera radiale con manicotti a incollaggio Doppio Effetto
Nominal SizeMisura nominale
CodeCodice
D inch DN E H O R S Z Weight (GR)Peso
16 BDRPBK016D 3/8" 10 110 78 45 209 110 46 790
20 BDRPBK020D ½" 15 110 78 45 209 110 46 790
25 BDRPBK025D ¾" 20 116 90 48 209 110 52 850
32 BDRPBK032D 1" 25 126 104 52,5 209 110 60 950
40 BDRPBK040D 1¼" 32 141 120 60 209 120 68 1100
50 BDRPBK050D 1½" 40 157 140 66 273 130 78 1690
63 BDRPBK063D 2" 50 177 169 75 295 150 93 2150
75 BDRPBK075D 2½" 65 234 227 110 405 220 139 5500
90 BDRPBK090D 3" 80 234 242 110 405 220 139 5650
110 BDRPBK110D 4" 100 275 282 132.5 447 255 160 8200
Spring return / Valvola a sfera radiale con manicotti a incollaggio Semplice Effetto, ritorno a molla
Nominal SizeMisura nominale
CodeCodice
D inch DN E H O R S Z Weight (GR)Peso
16 BDRPBK016S 3/8" 10 110 78 45 209 110 46 790
20 BDRPBK020S ½" 15 110 78 45 209 110 46 790
25 BDRPBK025S ¾" 20 116 90 48 209 110 52 850
32 BDRPBK032S 1" 25 126 104 52,5 209 110 60 950
40 BDRPBK040S 1¼" 32 141 120 60 209 120 68 1100
50 BDRPBK050S 1½" 40 157 140 66 273 130 78 1690
63 BDRPBK063S 2" 50 177 169 75 295 150 93 2150
75 BDRPBK075S 2½" 65 234 227 110 405 220 139 5500
90 BDRPBK090S 3" 80 234 242 110 405 220 139 5650
110 BDRPBK110S 4" 100 275 282 132.5 447 255 160 8200
# Refer to metric equivalent
EBK
PBK-D
PBK-S
73
PVCu Valves / Valvole PVC-U
PVCu Pneumatically Actuated Double Union Ball Valves Fail Safe ClosedValvola a Sfera Radiale Attuatore Pneumatico
Actuation Kit / Kit per attuazione
CodeCodice
DescriptionDescrizione
BDRKITB10320 Nylon + PVC Support + Bolts
BDRKITB10400 Nylon + PVC Support + Bolts
BDRKITB10500 Nylon + PVC Support + Bolts
BDRKITB10630 Nylon + PVC Support + Bolts
# Refer to metric equivalent
PVCu Electrically Actuated Butterfly Valves / PVC-U Valvole a farfalla a comando elettrico
Electrically Actuated Butterfly Valve / Valvola a Farfalla a comando elettrico EFV
Nominal SizeMisura nominale
Code / Codice EPDM
Code / Codice FPM
DN A B C D R S T V H K Weight (GR)Peso
63-75 FDREFV0630 FDREFVYA0750 65 192.5 165 110 104 392,5 48 108 168 18 x 4 125/145 2890
90 FDREFV0900 FDREFVYA0900 80 213 200 113 75 413 56 108 168 18 x 8 160 3160
110 FDREFV1100 FDREFVYA1100 100 233 220 123 77 433 56 108 168 18 x 8 180 3400
125 FDREFV1250 FDREFVYA1250 125 244 230 128 77 444 59 108 168 18 x 8 190 3810
140 FDREFV1400 FDREFVYA1400 125 264 251 139 87 464 60 108 168 18 x 8 210 4070
160 FDREFV1600 FDREFVYA1600 150 292 285 149 113 492 70 108 168 18 x 8 240 4840
200-225 FDREFV2250 FDREFVYA2250 200 345 273 180 135 592 71 200 216 22 x 8 295 6920
250 FDREFV2500 225 503 321 755 108 214 235 22x12 350 15182
315 FDREFV3150 315 503 370 790 131 214 235 22x12 400 27200
# Refer to metric equivalent
PVCu Pneumatically Actuated Butterfly Valves / PVC-U Valvole a farfalla a comando pneumatico
Spring return / Valvola a farfalla a comando pneumatico – Semplice Effetto, ritorno a molla
Nominal SizeMisura nominale
CodeCodice
D inch DN A B C D R S T V Weight (GR)Peso
63-75 FDRPFV0750S 21/2” 65 192.5 165 110 104 392.5 48 120 216 3340
90 FDRPFV0900S 3” 80 213 200 113 75 413 56 120 216 3610
110 FDRPFV1100S 4” 100 233 220 123 77 433 56 120 216 4400
125 FDRPFV1250S 5” 125 244 230 128 77 444 59 137 290 7110
140 FDRPFV1400S 5” 125 264 251 139 87 464 60 137 290 7370
160 FDRPFV1600S 6” 150 292 285 149 113 492 70 137 290 8140
200-225 FDRPFV2000S 8” 200 345 273 180 135 592 71 172 368 9920
# Refer to metric equivalent
EFV
PFV-S
PVCu Electrically Actuated Double Union Ball Valves / PVC-U Valvola a sfera radiale con attuatore pneumatico(220–240 volt) (110 volt)
Electrically actuated double union ball valve–plain sockets EPDM sealsValvola a sfera radiale con manicotti ad incollaggio a comando elettrico – EBK guarnizioni in EPDMNominal SizeMisura nominale
Code / Codice12/24v
Code / Codice 85/240v D Weight (GR)
Peso
16 BDREBKJA0160 BDREBKYA0160 3/8” 1840
20 BDREBKJA0200 BDREBKYA0200 1/2” 1840
25 BDREBKJA0250 BDREBKYA0250 3/4” 1900
32 BDREBK1JA0320 BDREBK1YA0320 1” 1900
40 BDREBK1JA0400 BDREBK1YA0400 11/4” 2050
50 BDREBK1JA0500 BDREBK1YA0500 11/2” 2250
63 BDREBK1JA0630 BDREBK1YA0630 2” 2650
75 BDREBKJA0750 BDREBK0750 21/2” 5400
90 BDREBKJA0900 BDREBKYA0900 3“ 8000
110 BDREBKJA1100 BDREBKYA1100 4” 8000
# Refer to metric equivalent
PVCu Pneumatically Actuated Double Union Ball Valves Fail Safe ClosedValvola a Sfera Radiale Attuatore Pneumatico
Double Acting / Valvola a sfera radiale con manicotti a incollaggio Doppio Effetto
Nominal SizeMisura nominale
CodeCodice
D inch DN E H O R S Z Weight (GR)Peso
16 BDRPBK016D 3/8" 10 110 78 45 209 110 46 790
20 BDRPBK020D ½" 15 110 78 45 209 110 46 790
25 BDRPBK025D ¾" 20 116 90 48 209 110 52 850
32 BDRPBK032D 1" 25 126 104 52,5 209 110 60 950
40 BDRPBK040D 1¼" 32 141 120 60 209 120 68 1100
50 BDRPBK050D 1½" 40 157 140 66 273 130 78 1690
63 BDRPBK063D 2" 50 177 169 75 295 150 93 2150
75 BDRPBK075D 2½" 65 234 227 110 405 220 139 5500
90 BDRPBK090D 3" 80 234 242 110 405 220 139 5650
110 BDRPBK110D 4" 100 275 282 132.5 447 255 160 8200
Spring return / Valvola a sfera radiale con manicotti a incollaggio Semplice Effetto, ritorno a molla
Nominal SizeMisura nominale
CodeCodice
D inch DN E H O R S Z Weight (GR)Peso
16 BDRPBK016S 3/8" 10 110 78 45 209 110 46 790
20 BDRPBK020S ½" 15 110 78 45 209 110 46 790
25 BDRPBK025S ¾" 20 116 90 48 209 110 52 850
32 BDRPBK032S 1" 25 126 104 52,5 209 110 60 950
40 BDRPBK040S 1¼" 32 141 120 60 209 120 68 1100
50 BDRPBK050S 1½" 40 157 140 66 273 130 78 1690
63 BDRPBK063S 2" 50 177 169 75 295 150 93 2150
75 BDRPBK075S 2½" 65 234 227 110 405 220 139 5500
90 BDRPBK090S 3" 80 234 242 110 405 220 139 5650
110 BDRPBK110S 4" 100 275 282 132.5 447 255 160 8200
# Refer to metric equivalent
74
PVCu Pneumatically Actuated Butterfly Valves / PVC-U Valvole a farfalla a comando pneumatico
Double acting / Doppio Effetto
Nominal SizeMisura nominale
CodeCodice
D
63-75 FDRPFV0750D 21/2”
90 FDRPFV0900D 3”
110 FDRPFV1100D 4”
125 FDRPFV1250D 5”
140 FDRPFV1400D 5”
160 FDRPFV1600D 6”
200-225 FDRPFV2000D 8”
# Refer to metric equivalent
Diaphragm valves / Valvole a membrana
Diaphragm Valves Manually Operated / Valvole a membrana Manuale
Nominal SizeMisura nominale
CodeCodice
A A1 øB ød øD H1 R t LA
20 MDRMVD0200 81 94.0 70 25 60 31.0 G 1 1/2 15 116
25 MDRMVD0250 81 94.0 70 32 60 31.0 G 1 1/2 15 116
32 MDRMVD0320 139 155.0 139 40 83 42.5 G 2 1/4 21 154
40 MDRMVD0400 139 155.0 139 50 83 42.5 G 2 1/4 21 154
50 MDRMVD0500 142 158.0 139 63 103 52.5 G 2 3/4 26 182
63 MDRMVD0630
Diaphragm Valves Pneumatically Actuated / Valvole a membrana a comando pneumatico
Nominal SizeMisura nominale
CodeCodice
20 MDRMFD0200
25 MDRMFD0250
32 MDRMFD0320
40 MDRMFD0400
50 MDRMFD0500
63 MDRMFD0630
# Refer to metric equivalent
PFV-D
MVD
MFD
75
PVCu Valves / Valvole PVC-U
Diaphragm valves / Valvole a membrana
Angle Seat Globe Valves Plastic / Valvole a membrana a comando pneumatico a sede inclinata
Nominal SizeMisura nominale
CodeCodice
A A1 B ød øD H1 R t LA
20 MDRMID0200 135 33 105 25 60 31.0 G1 1/2 15 116
25 MDRMID0250 135 33 105 32 60 31.0 G1 1/2 15 116
32 MDRMID0320 222 79 151 40 83 42.5 G2 1/4 21 154
63 MDRMID0630
Diaphragm Valve Pneumatically Actuated / Valvole a membrana a comando pneumatico ad azione diretta
Nominal SizeMisura nominale
CodeCodice
DN C G H L Z Weight (GR)Peso
40 MDRMMD0400 32 38 1/4 73 204 150 1.100
50 MDRMMD0500 40 38 1/4 73 192 130 1.150
63 MDRMMD0630 50 45 1/4 80 224 148 1.700
1” x 11/4” MERMME032E
11/4” x 11/4” MERMME040E
# Refer to metric equivalent
MID
MMD-MME
76
ABS Fittings & ValvesRaccordi e Valvole in ABS
77
ABS
ABS Pipe SystemsABS (Acrylonitrile Butadiene Styrene) is highly rated as a
thermoplastic pipework system and is used in many applications
such as food and beverage processing as well as water and sewerage
treatment and many other industries.
ABS has good chemical resistance with high impact strength.
ABS is non toxic and conforms to the toxicological requirements of
the British Plastic Federation, British Industrial Biological Research
Association Code of Practice for food usage 45/5.
It also fulfils the EEC requirements for plastic materials in contact
with foodstuffs.
ABS systems are lightweight, rigid and easy to install using a solvent
cement.
ColourABS products are recognised by their light grey colour (RAL 7046).
Chemical ResistancePolypipe Effast ABS has good resistance to most diluted inorganic
acids, salts, animal fats and oils and organic acids. It is not resistant
to organic solvents, alcohol, petrol, acetic acid or vegetable oils.
Recommendations can be given by our Technical Department
regarding the resistance of ABS to specific chemicals.
StandardsIndividual products are in compliance with appropriate
British Standards:
Fittings (inch size) BS 5392 Part 1
Pipe (inch size) BS 5391
Threaded fittings BS 21, DIN 2999, ISO7
Solvent Cement BS 4346 Part 3
Imperial and Metric SizesThe following notes may be helpful to those unfamiliar with the
different ways of describing metric and imperial sizes when specifying
pipe or fittings.
When specifying Imperial pipe fittings and other components
reference is made to the nominal size of the pipe bore in inches and
fractions of an inch.
Metric Systems are specified by reference to the outside diameter of
the pipe expressed in millimetres.
As a general guide the following table gives a comparison between metric
and imperial sizes up to 8 inches. It is important to understand that metric
sizes are not simply inch sizes which have been converted into millimetres
and called metric. The actual equivalents are slightly different (except for
Imperial size 21/2 inches and metric size 75mm and 5 inches and 140mm
which happen to coincide exactly) and are not interchangeable.
Tubi e raccordi in ABSL’ABS (Acrilonitrile butadiene Stirene) è un materiale termoplastico
molto apprezzato nei sistemi di tubatura ed è usato in molte
applicazioni come nell’industria alimentare e della produzione di
bibite e acque, nelle reti fognarie e in molti altri campi.
L’ABS ha una buona resistenza chimica e un’ottima resistenza all’urto.
L’ABS non è tossico ed è conforme ai requisiti di della British Plastic
Federation, British Industrial Biological Research Association Code of
Pratice per uso con alimenti.
Soddisfa anche i requisiti della CEE per i materiali a contatto con
alimenti.
I sistemi tubo-raccordi in ABS sono leggeri, rigidi e facili da installare
con il sistema ad incollaggio.
ColoreI prodotti in ABS sono riconoscibili dal loro colore grigio chiaro (RAL 7046).
Resistenza chimicaL’ABS Polypipe Effast ha una buona resistenza a molti diluenti
inorganici, acidi, basi, grassi animali, oli e acidi organici. Non è molto
adatto ai solventi organici, alcool, idrocarburi, acido acetico o oli
vegetali. Il nostro ufficio Tecnico può fornire tutte le raccomandazioni
sulla resistenza chimica del sistema ABS alle diverse sostanze chimiche.
StandardsI prodotti sono in accordo con le seguenti normative
British Standard:
Raccordi (BS) BS 5392 Parte 1
Tubi (BS) BS 5391
Raccordi Filettati BS21, DIN 2999, ISO7
Colla BS 4346 Part 3
Misure British Standard e Metriche
Le note che seguono possono essere utili per coloro che hanno scarsa
familiarità con i diversi sistemi di misura (metrici o in pollici) usati
nelle specifiche dei tubi.
Quando il sistema di misura utilizzato è quello “British Standard” si fa
riferimento al diametro nominale interno (dei tubi) espresso in pollici
ed in frazioni di pollici.
I sistemi metrici fanno riferimento al diametro esterno dei tubi
espresso in millimetri.
Come linea guida generale, la tabella che segue fornisce un confronto fra
misure in pollici e metriche fino ad 8”. É importante sottolineare che le
misure metriche non derivano dalla semplice conversione delle misure in
pollici; ad eccezione della misura di 2” 1/2” (esattamente corrispondente
alla misura metrica di 75 mm) il sistema in pollici ed il sistema metrico non
sono intercambiabili; non c’è equivalenza fra i due sistemi.
WRAS ApprovalWater Regulations Advisory Scheme.
Approved product for potable waterApprovati WRASKite Mark Licence
Fittings No. KM 60042Kite Mark LicenceFittings No. KM 60042
ABS Fittings & ValvesRaccordi e Valvole in ABS
78
Temperature and PressureIt is suitable for use over a wide temperature range from
-40°C to +60°C at pressures up to 15 bar. Please consult the
temperature/pressure relationship chart for specific ratings. It is
important to remember that if the temperature is increased above
20°C then the pressure must be reduced.
ABS in sub-zero temperaturesABS Pipe systems are suitable for temperatures as low as
-40°C, however it is necessary as with any other pipeline to
take preventative measures to ensure the pipeline fluid does
not freeze, as freezing would cause subsequent damage to the
system.
Thermal expansionThe thermal coefficient of linear expansion for ABS is
10.1 x 10-5m/m.°C. It is necessary in certain situations to make
special provision for this expansion and contraction. Thermal
expansion of ABS is compared with other materials, in the
following chart.
Temperature e PressioniIl sistema ABS è adatto per essere impiegato in un range di
temperatura fra -40°C e +60°C alla pressione massima di 15
bar. Consultare a tale proposito il grafico della relazione fra
temperature/pressioni per l’uso corretto. È importante ricordare
che se la temperatura viene aumentata sopra i 20°C la pressione
deve essere ridotta.
ABS alle basse temperatureIl sistema ABS è adatto ad essere impiegato alle basse
temperature fino a -40°C, è comunque necessario prendere
precauzioni per non far gelare il fluido impiegato. Questo
potrebbe causare danni al sistema.
Dilatazione TermicaIl coefficiente lineare di dilatazione termica per l’ABS è 10.1 x
10-5 m/m°C. E’ necessario, per alcuni impieghi, prevedere le
corrette dilatazioni e contrazioni. La dilatazione termica dell’ABS
in comparazione con altri materiali è evidenziata nel seguente
grafico:
General Information Temperature range -40°C to +60°CSize rangeImperial Solvent weld 1/2” – 8”Threaded 1/2” – 4”
Informazioni generali Range di temperatura Da -40°C a +60°CDimensioniRaccordi ad incollaggio: 1/2” – 8”Raccordi filettati 1/2” – 4”
Acciaio dolce
Acciaio inox 18/8
Rame
PVC-U
ABS
Polipropilene
Imperial Sizes (inches) Metric Sizes (mm)
Nominal bore Pipe outside dia. Pipe outside dia. Nominal bore
3/8” 17.1 16 10
1/2” 21.4 20 15
3/4” 26.7 25 20
1” 33.6 32 25
11/4” 42.2 40 32
11/2” 48.3 50 40
2” 60.3 63 50
21/2” 75.2 75 65
3” 88.9 90 80
4” 114.3 110 100
5” 140.2 140 125
6” 168.3 160 150
8” 219.1 225 200
Misure in Pollici (inches) Misure Metriche (mm)
Diametro nominale Diam. esterno del tubo Diam. esterno del tubo Diametro nominale
3/8” 17.1 16 10
1/2” 21.4 20 15
3/4” 26.7 25 20
1” 33.6 32 25
11/4” 42.2 40 32
11/2” 48.3 50 40
2” 60.3 63 50
21/2” 75.2 75 65
3” 88.9 90 80
4” 114.3 110 100
5” 140.2 140 125
6” 168.3 160 150
8” 219.1 225 200
79
ABS
Pressure Ratings Fittings & Valves ImperialUnless otherwise indicated the pressure ratings are as follows
PRODUCT SIZE PRESSURE RATING
Fitting Solvent Cement 1/2” – 6” 15 bar (217psi)Fitting Solvent Cement 8” 9 bar (130psi)Fittings Threaded 3⁄8” – 4” 10 bar (145psi)Valves 3⁄8” – 2” 16 bar (232psi)Valves 21/2” – 4” 10 bar (145psi)
All pressure ratings are at 20°C
All threaded fittings are parallel thread unless otherwise stated.
ie: BSP Female and BSP Male are Parallel
BSPT = Tapered Thread
Pressione di esercizio ammissibile dei Raccordi e Valvole British Standard Se non diversamente specificato le pressioni massime di esercizio sono le seguenti:
PRODOTTI MISURE PRESSIONE NOMINALE
Raccordi ad incollaggio 1/2” – 6” 15 bar (217psi)Raccordi ad incollaggio 8” 9 bar (130psi)Raccordi filettati 3⁄8” – 4” 10 bar (145psi)Valvole 3⁄8” – 2” 16 bar (232psi)Valvole 21/2” – 4” 10 bar (145psi)
Tutti valori di pressione sono a 20°C
Tutti i raccordi filettati sono cilindrici se non diversamente specificato
Esempio: BSP maschio e BSP Femmina sono cilindrici
BSPT = Filettatura conica
Temperature & Pressure Relationship
Temp°C Class C Class D Class E
BAR PSI BAR PSI BAR PSI
0 9.0 130 12.0 173 15.0 217
20 9.0 130 12.0 173 15.0 217
30 8.1 117 10.8 155 13.5 195
35 7.2 104 9.6 138 12.0 173
40 6.3 91 8.4 121 10.5 152
45 5.4 78 7.2 104 9.0 130
50 4.0 58 5.4 78 6.7 97
55 2.7 39 3.6 52 4.5 65
60 1.3 19 1.8 26 2.2 32
Relazione fra Pressioni e Temperature
Temp°C Class C Class D Class E
BAR PSI BAR PSI BAR PSI
0 9.0 130 12.0 173 15.0 217
20 9.0 130 12.0 173 15.0 217
30 8.1 117 10.8 155 13.5 195
35 7.2 104 9.6 138 12.0 173
40 6.3 91 8.4 121 10.5 152
45 5.4 78 7.2 104 9.0 130
50 4.0 58 5.4 78 6.7 97
55 2.7 39 3.6 52 4.5 65
60 1.3 19 1.8 26 2.2 32
PRODUCT SIZE PRESSURE RATING
Fitting Solvent Cement 16–160 16 bar (232psi) Fitting Solvent Cement 200–225 10 bar (145psi)
Valves 20–63 16 bar (232psi) Valves 75–110 10 bar (145psi)All pressure ratings are at 20°C
PRODOTTI MISURE PRESSIONE NOMINALE
Raccordi ad incollaggio 16–160 16 bar (232psi) Raccordi ad incollaggio 200–225 10 bar (145psi) Valvole 20–63 16 bar (232psi) Valvole 75–110 10 bar (145psi)Tutti i valori di pressione sono a 20 ° C
Pressure Ratings Fittings & Valves MetricUnless otherwise indicated the pressure ratings are as follows
Pressione di esercizio ammissibile dei Raccordi e Valvole MetriciSe non diversamente specificato le pressioni massime di esercizio sono le seguenti:
80
Temperature and pressure relationship for ABS pipes Relazione fra temperatura e pressione nei tubi in ABS
Class C Class E
Temperature (°C) bar (psi) bar (psi)
–40 9.0 (130) 15.0 (217)
–20 9.0 (130) 15.0 (217)
0 9.0 (130) 15.0 (217)
20 9.0 (130) 15.0 (217)
30 8.1 (117) 13.5 (195)
40 6.3 (91) 10.5 (152)
50 4.5 (65) 7.5 (108)
60 2.7 (39) 4.5 (65)
Imperial and metric size informationInformazioni sulle misure British Standard e Metriche
Useful InformationThe following information may be helpful in understanding the
specification of metric and imperial sizes and pressure ratings when
selecting pipe.
When specifying imperial pipe, fittings and other components, reference
is made to the nominal size of the pipe bore in inches and fractions of an
inch. With metric systems, reference is made to the outside diameter and
is expressed in millimetres. It is important to note that with the exception
of 2½"/75mm and 5"/140mm the systems are not interchangeable.
Informazioni utiliLe seguenti informazioni possono essere utili per comprendere le
specifiche delle misure metriche e British Standard e le relative pressioni di
esercizio per scegliere le dimensioni dei tubi.
Quando si scelgono tubi, raccordi e altri componenti British Standard, il
riferimento è per la misura nominale dell’interno del tubo in pollici e frazioni
di pollici. Con le misure metriche il riferimento è per il diametro esterno
espresso in millimetri. E’ importante notare che con l’eccezione della misura
di 75mm/2”1/2” e 140mm/5” i due sistemi non sono intercambiabili.
Imperial sizes / British Standard Metric sizes / Misure Metriche
Nominal / Nominale Pipe / Tubo Pipe / Tubo Nominal / Nominale
bore (inches) outside diameter (mm) outside diameter (mm) bore (mm) Foro (pollici) diametro esterno diametro esterno Foro (pollici)
3/8" 17.1 16 10
½" 21.4 20 15
¾" 26.7 25 20
1" 33.6 32 25
1¼" 42.2 40 32
1½" 48.3 50 40
2" 60.3 63 50
2½" 75.2 75 65
3" 88.9 90 80
4" 114.3 110 100
5" 140.2 140 125
6" 168.3 160 150
8" 219.1 225 200
ABS pressure pipes 6m lengths BS plain endTubi in ABS lunghezza 6 mt
DescriptionDescrizione Product code
Codice prodotto
Pressure pipe class C / PN 9 / Tubo classe C / PN 9
1" TAAT0C0320
11/4" TAAT0C0400
11/2" TAAT0C0500
2" TAAT0C0630
21/2" TAAT0C0750
3" TAAT0C0900
4" TAAT0C1100
6" TAAT0C1600
8" TAAT0C2250
Pressure pipe class E / PN 15 / Tubo classe E / PN 15
1/2" TAAT0E0200
3/4" TAAT0E0250
1" TAAT0E0320
11/4" TAAT0E0400
11/2" TAAT0E0500
2" TAAT0E0630
3" TAAT0E0900
4" TAAT0E1100
Pressure pipe class T / PN 12 / Tubo classe T / PN 12
1/2" TAAT0T0200
3/4" TAAT0T0250
1" TAAT0T0320
11/4" TAAT0T0400
11/2" TAAT0T0500
2" TAAT0T0630
81
ABS
ABS solvent cement fittings BS / ABS Raccordi ad incollaggio British Standard BS* For backing rings and gaskets see Accessories section* Per le guarnizioni vedere la sezione Accessori
Elbow 90° Plain / Gomito 90°
Nominal SizeMisura Nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
1/2" RAAGOA0200 17 11 27 M 13
3/4" RAAGOA0250 20 14 33 M 20
1" - RAAGOA0320 23 17 41 M 35
11/4" RAAGOA0400 27 22 51 M 56
11/2" - RAAGOA0500 32 26 61 L 117
2" - RAAGOA0630 37 34 75 L 222
21/2" RAAGOA0750 44 39 90 L 301
3" - RAAGOA0900 52 45 107 L 509
4" RAAGOA1100 63 59 133 L 948
5" RAAGOA1400 79 68 164 L 1543
6" - RAAGOA1600 93 85 198 L 2961
8*" RAAGOA2250 116 116 258 L 6567
Elbow 45° Plain / Gomito 45°
Nominal SizeMisura Nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
1/2" RAAGYA0200 17 5 27 S 12
3/4" RAAGYA0250 20 6 33 M 18
1" - RAAGYA0320 23 8 41 M 31
11/4" RAAGYA0400 27 10 52 M 47
11/2" - RAAGYA0500 32 12 61 L 97
2" - RAAGYA0630 39 15 75 L 176
21/2" RAAGYA0750 44 18 90 L 231
3" RAAGYA0900 52 21 107 L 390
4" RAAGYA1100 63 25 133 L 649
6" RAAGYA1600 90 36 198 L 2306
8"* RAAGYA2250 112 52 253 L 3820
Socket Plain / Manicotto
Nominal SizeMisura Nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
1/2" RAAMAA0200 17 3 27 S 11
3/4" RAAMAA0250 20 3 33 M 16
1" - RAAMAA0320 23 3 41 M 25
11/4" RAAMAA0400 27 3 52 M 39
11/2" RAAMAA0500 32 3 61 L 74
2" - RAAMAA0630 37 3 75 L 132
21/2" RAAMAA0750 44 4 90 L 164
3" RAAMAA0900 52 5 107 L 283
4" RAAMAA1100 67 6 133 L 526
5" RAAMAA1400 76 8 164 L 833
6" RAAMAA1600 90 8 198 L 1294
8"* RAAMAA2250 120 10 253 L 3391
IIP - kiwa - NF - BSI
A-GOA
A-GYA
A-MAA
82
ABS solvent cement fittings BS / ABS Raccordi ad incollaggio British Standard BS* For backing rings and gaskets see Accessories section* Per le guarnizioni vedere la sezione Accessori
Tee 90° Plain / Raccordo T 90°
Nominal SizeMisura Nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
1/2" RAATIA0200 17 11 27 M 17
3/4" RAATIA0250 20 14 33 M 27
1" - RAATIA0320 23 17 41 M 50
11/4" RAATIA0400 27 21 52 M 79
11/2" - RAATIA0500 32 26 61 L 116
2" - RAATIA0630 37 33 75 L 284
21/2" RAATIA0750 44 39 90 L 394
3" - RAATIA0900 52 45 107 L 657
4" RAATIA1100 63 62 133 L 1131
5" RAATIA1400 76 71 164 L 2032
6" RAATIA1600 93 86 198 L 3755
8"* RAATIA2250 116 116 258 L 8453
Cap Plain / Calotta
Nominal SizeMisura Nominale
CodeCodice L H E Pack
ImballoWeight (GR)
Peso
1/2" RAACAA0200 17 37 27 S 9
3/4" RAACAA0250 20 31 33 S 12
1" RAACAA0320 23 35 41 S 21
11/4" RAACAA0400 27 42 52 M 30
11/2" RAACAA0500 32 47 61 M 59
2" RAACAA0630 39 48 75 M 104
21/2" RAACAA0750 44 59 90 M 137
3" RAACAA0900 52 81 107 L 235
4" RAACAA1100 63 99 133 L 397
6" RAACAA1600 90 132 191 L 1021
8"* RAACAA2250 119 165 255 L 2311
Bend 90° Short Radius Plain / Curva 90°
Nominal SizeMisura Nominale
CodeCodice L H E Pack
ImballoWeight (GR)
Peso
1/2" RAACUA0200 17 40 30 M 55
3/4" RAACUA0250 20 50 36 M 55
1" RAACUA0320 23 64 44 M 90
11/4" RAACUA0400 27 80 54 M 156
11/2" RAACUA0500 32 100 63 L 256
2" RAACUA0630 39 126 78 L 445
21/2" RAACUA0750 44 150 94 L 777
3" RAACUA0900 51 180 113 L 1361
IIP - kiwa - NF - BSI
A-TIA
A-CAA
A-CUA
83
ABS
ABS solvent cement fittings BS / ABS Raccordi ad incollaggio British Standard BS* For backing rings and gaskets see Accessories section* Per le guarnizioni vedere la sezione Accessori
Union Plain / Bocchettone
Nominal SizeMisura Nominale
CodeCodice L Z1 Z2 F E Pack
ImballoWeight (GR)
Peso
1/2" RAABOA0200 17 3 10 1" 42 S 31
3/4" RAABOA0250 20 3 10 11/4" 52 M 49
1" RAABOA0320 23 3 10 11/2" 59 M 67
11/4" RAABOA0400 27 3 12 2" 72 M 115
11/2" RAABOA0500 32 3 14 21/4" 79 M 164
2" RAABOA0630 39 3 18 23/4" 96 M 288
21/2"* RAABOA0750 44 3 18 31/2" 119 L 434
3"* RAABOA0900 52 5 18 4" 134 L 599
4"* RAABOA1100 63 5 18 5" 163 L 876
Cross 90° Plain / Raccordo a croce
Nominal SizeMisura Nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
1" RAACRA0320 23 17 42 M 110
11/2" RAACRA0500 31 26 61 M 270
2" RAACRA0630 38 33 75 M 510
Reducing Socket Plain / Riduzione lunga
Nominal SizeMisura Nominale
CodeCodice L1 L2 Z E1 E2 Pack
ImballoWeight (GR)
Peso
11/4" x 1" RAAMRA040D 27 23 5 51 42 M 49
11/2" x 11/4" RAAMRA050E 32 27 5 61 52 M 84
2" x 11/2" RAAMRA063F 39 32 5 75 62 M 155
4" x 3" RAAMRA110I 63 52 4 130 108 L 524
Stub Flange (Serrated Face) Plain / Collare per flange rigato
Nominal SizeMisura Nominale
CodeCodice L Z d S E Pack Weight (GR)
1/2" RAAQRA0200 17 3 27 6 34 S 8
1" RAAQRA0320 23 3 41 7 50 S 18
11/2" RAAQRA0500 32 3 61 8 73 M 50
2" RAAQRA0630 39 3 76 9 90 M 91
21/2" RAAQRA0750 44 3 90 10 106 L 118
3" RAAQRA0900 52 5 108 11 125 L 209
4" RAAQRA1100 63 5 134 12 155 L 330
5" RAAQRA1400 76 5 165 13 188 L 563
6" RAAQRA1600 90 6 197 14 218 L 816
8"* RAAQRA2250 119 7 248 19 274 L 1580
IIP - kiwa - NF - BSI
A-BOA
A-CRA
A-MRA
A-QRA
84
ABS solvent cement fittings BS / ABS Raccordi ad incollaggio British Standard BS* For backing rings and gaskets see Accessories section* Per le guarnizioni vedere la sezione Accessori
Reducing Bush Plain / Riduzione a incollaggio
Nominal SizeMisura Nominale
CodeCodice L1 L2 Z FIG Pack
ImballoWeight (GR)
Peso
A
B
3/4" x 1/2" RAARCA025B 20 17 3 A S 6
1" x 1/2" RAARCA032B 20 17 6 B S 16
1" x 3/4" RAARCA032C 23 20 3 A S 10
11/4" x 1" RAARCA040D 27 23 4 A S 20
11/2" x 3/4" RAARCA050C 32 20 12 B M 39
11/2" x 1" RAARCA050D 32 23 9 B M 42
11/2" x 11/4" RAARCA050E 32 27 5 A M 22
2" x 1" RAARCA063D 39 23 16 B M 69
2" x 11/4" RAARCA063E 39 27 12 B M 71
2" x 11/2" RAARCA063F 39 32 7 A M 54
21/2" x 11/2" RAARCA075F 45 31 14 B M 93
21/2" x 2" RAARCA075G 44 39 5 A M 95
3" x 11/2" RAARCA090F 52 32 20 B M 169
3" x 2" RAARCA090G 52 39 13 B M 143
3" x 21/2" RAARCA090H 52 44 8 A M 96
4" x 2" RAARCA110G 63 39 24 B M 336
4" x 3" RAARCA110I 63 52 11 A M 258
5" x 4" RAARCA140L 77 65 12 A M 415
6" x 4" RAARCA160L 90 63 27 B M 745
8" x 6"* RAARCA225O 118 91 27 B M 1559
IIP - kiwa - NF - BSI
ABS full face flanges (drilled) BS / ABS Flange forate British StandardFor gaskets see Accessories section / Per le guarnizioni vedi sezione accessori
Full Face Flange Drilled to BS 10 Table E Plain / Flangia fissa forata British Standard 10
Nominal SizeMisura Nominale
CodeCodice L Z E f I S HOLES
ForiPack
ImballoWeight (GR)
Peso
1" RAAFFA0320 23 4 115 14 83 16 4 S 145
11/2" RAAFFA0500 32 4 152 18 98 17 4 M 270
2" RAAFFA0630 38 4 165 18 115 20 4 M 380
3" RAAFFA0900 51 7 200 18 146 22 4 M 526
4" RAAFFA1100 61 5 220 18 178 23 8 L 663
Full Face Flange Drilled to BS 4504 NP10/16 Plain / Flangia fissa forata British Standard 4505
Nominal SizeMisura Nominale
CodeCodice L Z E f I S HOLES
ForiPack
ImballoWeight (GR)
Peso
1" RAAFNA0320 23 4 115 14 85 16 4 S 145
11/4" RAAFNA0400 27 4 142 18 100 17 4 M 220
11/2" RAAFNA0500 32 4 152 18 110 17 4 M 270
2" RAAFNA0630 38 4 165 18 125 20 4 M 380
21/2" RAAFNA0750 44 4 185 18 145 19 4 M 465
3" RAAFNA0900 51 7 200 18 160 22 8 M 524
4" RAAFNA1100 61 5 220 18 180 23 8 L 666
# Refer to metric equivalent
A-RCA
A-FFA
A-FNA
85
ABS
ABS blanking flanges BS / ABS Flange cieche* For gaskets see Accessories section* Per le guarnizioni consulta la sezione accessori
Blanking Flange Drilled to BS4504 NP10/16 / Flangia cieca Forata British Standard 4505
Nominal SizeMisura Nominale
CodeCodice E S I f HOLES Pack
ImballoWeight (GR)
Peso
2" RAAFCA0630 165 18 125 18 4 M 300
3" RAAFCA0900 200 20 160 18 8 M 524
4" RAAFCA1100 220 22 180 18 8 M 660
# Refer to metric equivalent
A-FCA
ABS adaptor fittings BS / ABS Raccordi adattatori British Standard* For gaskets see Accessories section* Per le guarnizioni consulta la sezione accessori
Elbow 90° Plain/BSP Female Threaded / Gomito 90° Incollaggio BS/filettatura femmina BSP
CodeCodice L1 L2 Z1 Z2 E Pack
ImballoWeight (GR)
Peso
1/2" 1/2" RCAGOC020B 17 15 11 12 28 S 16
3/4" 3/4" RCAGOC025C 20 16 14 17 34 M 28
1" 1" RCAGOC032D 23 19 17 20 42 M 49
11/4" 11/4" RCAGOC040E 27 21 21 27 51 M 76
11/2" 11/2" RCAGOC050F 32 21 26 37 61 L 163
2" 2" RCAGOC063G 39 26 33 46 75 L 308
3" 3" RCAGOC090I 51 35 47 66 106 L 549
Tee 90° Plain/BSP Female Threaded / Raccordo T 90° incollaggio BS/ Incollaggio BS/filettatura femmina BSP
CodeCodice L1 L2 Z1 Z2 E Pack
ImballoWeight (GR)
Peso
1/2" 1/2" RCATIC020B 17 15 11 12 28 M 25
3/4" 3/4" RCATIC025C 20 16 14 17 34 M 38
1" 1" RCATIC032D 23 19 17 20 42 M 69
11/4" 11/4" RCATIC040E 27 21 21 27 51 M 106
11/2" 11/2" RCATIC050F 32 21 26 37 61 L 213
2" 2" RCATIC063G 39 26 33 46 75 L 380
3" 3" RCATIC090I 51 36 47 66 106 L 674
Socket Plain/BSP Female Threaded / Manicotto Incollaggio BS/filettatura femmina BSP
CodeCodice L1 L2 Z E Pack
ImballoWeight (GR)
Peso
1/2" 1/2" RCAMAC020B 17 15 4 28 S 15
3/4" 3/4" RCAMAC025C 20 16 6 34 M 22
1" 1" RCAMAC032D 23 19 6 42 M 37
11/4" 11/4" RCAMAC040E 27 21 8 51 M 60
11/2" 11/2" RCAMAC050F 32 21 13 61 M 104
2" 2" RCAMAC063G 39 26 15 89 M 161
3" 3" RCAMAC090I 52 33 9 106 L 343
# Refer to metric equivalent
A-GOC
A-TIC
A-MAC
d x Rp (EN UNI 10226)Nominal SizeMisura Nominale
d x Rp (EN UNI 10226)Nominal SizeMisura Nominale
d x Rp (EN UNI 10226)Nominal SizeMisura Nominale
86
ABS adaptor fittings BS / ABS Raccordi adattatori British Standard* For gaskets see Accessories section* Per le guarnizioni consulta la sezione accessori
Adaptor Plain Male Spigot/BSP Female Threaded / Adattatore maschio incollaggio BS/Femmina filettata BSP
CodeCodice L L2 E Z Pack
ImballoWeight (GR)
Peso
1/2" 1/2" RCAAFC020B 17 15 28 24 S 19
3/4" 3/4" RCAAFC025C 20 16 34 27 M 27
1" 1" RCAAFC032D 23 19 42 30 M 43
11/4" 11/4" RCAAFC040E 27 21 51 36 M 68
11/2" 11/2" RCAAFC050F 32 21 58 41 M 73
2" 2" RCAAFC063G 39 25 72 48 M 115
Adaptor Female Plain/BSP Male Threaded / Adattatore femmina incollaggio BS/Femmina filettata BSP
CodeCodice L L2 L3 H O Pack
ImballoWeight (GR)
Peso
1/2" 1/2" RCAAMC020B 17 19 15 46 30 S 16
3/4" 3/4" RCAAMC025C 20 22 16 50 36 M 28
1" 1" RCAAMC032D 23 27 19 57 46 M 48
11/4" 11/4" RCAAMC040E 27 32 21 66 55 M 54
11/2" 11/2" RCAAMC050F 32 39 21 74 65 M 113
2" 2" RCAAMC063G 39 44 25 84 80 M 184
3" 3" RCAAMC090I 52 61 33 113 115 L 356
4" 4" RCAAMC110L 63 66 39 120 130 L 454
Reducing Bush Plain/BSP Female Threaded / Riduzione incollaggio BS/ Femmina filettata BSP
CodeCodice L D G Pack
ImballoWeight (GR)
Peso
1/2" x 3/8" 1/2" x 3/8" RCARCC020A 16 1/2" 3/8" S 2
3/4” x 1/2" 3/4” x 1/2" RCARCC025B 19 3/4" 1/2" S 5
1" x 3/4" 1" x 3/4" RCARCC032C 22 1" 3/4" S 9
Elbow 90° Plain/BSP Female Threaded with Stainless Reinforcing Ring / Gomito 90° incollaggio/Femmina filettata BSP con anello di rinforzo in Acciaio inox
CodeCodice L L2 Z1 Z2 E Pack
ImballoWeight (GR)
Peso
1/2" 1/2" RCAGOCR020B 17 15 11 12 28 M 20
3/4" 3/4" RCAGOCR025C 20 16 14 17 34 M 36
1" 1" RCAGOCR032D 23 19 17 20 42 M 61
11/4" 11/4" RCAGOCR040E 27 21 21 27 51 M 92
11/2" 11/2" RCAGOCR050F 32 21 26 37 61 L 183
2" 2" RCAGOCR063G 39 26 33 46 75 L 332
# Refer to metric equivalent
A-AFC
A-AMC
A-RCC
A-GOC
d x Rp (EN UNI 10226)Nominal SizeMisura Nominale
d x R (EN UNI 10226)Nominal SizeMisura Nominale
d x Rp (EN UNI 10226)Nominal SizeMisura Nominale
d x Rp (EN UNI 10226)Nominal SizeMisura Nominale
87
ABS
ABS adaptor fittings BS / ABS Raccordi adattatori British Standard* For gaskets see Accessories section* Per le guarnizioni consulta la sezione accessori
Tee 90° Plain/BSP Female Threaded Branch with Stainless Reinforcing Ring / Raccordo a T 90° incollaggio/Femmina filettata BSP con anello di rinforzo in Acciaio inox
CodeCodice L L2 Z1 Z2 E Pack
ImballoWeight (GR)
Peso
1/2" 1/2" RCATICR020B 17 15 11 12 28 1 29
3/4" 3/4" RCATICR025C 20 16 14 17 34 1 46
1" 1" RCATICR032D 23 19 17 20 42 1 81
11/4" 11/4" RCATICR040E 27 21 21 27 51 1 122
11/2" 11/2" RCATICR050F 32 21 26 37 61 1 233
2" 2" RCATICR063G 39 26 33 46 75 1 404
Socket Plain/BSP Female Threaded with Stainless Reinforcing Ring / Manicotto incollaggio/Femmina filettata BSP con anello di rinforzo in Acciaio inox
CodeCodice L L2 Z E Pack
ImballoWeight (GR)
Peso
1/2" 1/2" RCAMACR020B 17 15 4 28 1 19
3/4" 3/4" RCAMACR025C 20 16 6 34 1 30
1" 1" RCAMACR032D 23 19 6 42 1 49
11/4" 11/4" RCAMACR040E 27 21 8 51 1 76
11/2" 11/2" RCAMACR050F 32 21 13 61 1 124
2" 2" RCAMACR063G 39 26 15 89 1 185
Adaptor Plain Male Spigot/BSP Female Threaded with Stainless Reinforcing Ring / Adattatore maschio incollaggio BS/Femmina filettata BSP con anello di rinforzo in Acciaio inox
CodeCodice L L2 E Z Pack
ImballoWeight (GR)
Peso
1/2" 1/2" RCAAFCR020B 17 15 28 24 1 23
3/4" 3/4" RCAAFCR025C 20 16 34 27 1 35
1" 1" RCAAFCR032D 23 19 42 30 1 55
11/4" 11/4" RCAAFCR040E 27 21 51 36 1 84
11/2" 11/2" RCAAFCR050F 32 21 58 41 1 93
2" 2" RCAAFCR063G 39 25 72 48 1 139
# Refer to metric equivalent
A-TIC
A-MAC
A-AFC
d x Rp (EN UNI 10226)Nominal SizeMisura Nominale
d x Rp (EN UNI 10226)Nominal SizeMisura Nominale
d x Rp (EN UNI 10226)Nominal SizeMisura Nominale
88
ABS manual ball valves–industrial BS / ABS Valvole a Sfera Serie “Industria” British StandardNominal Pressure: Size up to 2” NP 16 bar (232 psi), size 2”1/2” and above NP 10 bar (145 psi)Pressione di esercizio ammissibile per valvole 1/2”-2” 16 bar (232 psi), 2 ½”-4” 10 bar (145 psi)
Double Union Ball Valve Plain Sockets Seals / Valvola a sfera radiale con manicotti a incollaggio British Standard
Nominal SizeMisura Nominale
Code / CodiceEPDM
Code / Codice FPM E B L Z H C Pack
ImballoWeight (GR)
Peso
3/8" BAABKA0160 BAABKA016V 50 51 16 46 78 65 16 112
1/2" BAABKA0200 BAABKA020V 50 51 17 46 78 65 16 112
3/4" BAABKA0250 BAABKA025V 60 58 20 52 90 70 16 160
1" BAABK1A0320 BAABKA032V 68 65 23 60 104 82 16 240
11/4" BAABKA0400 BAABKA040V 80 76 27 68 120 92 16 360
11/2" BAABK1A0500 BAABKA050V 94 88 31 78 140 105 16 552
2" BAABK1A0630 BAABKA063V 115 104 38 93 169 123 16 920
21/2" BAABKA0750 BAABKA075V 168 137 44 139 227 168 10 2480
3" BAABKA0900 BAABKA090V 168 138 51 139 242 168 10 2680
4" BAABKA1100 BAABKA110V 210 166 63 160 282 190 10 4400
# Refer to metric equivalent
ABS check valves BS / ABS Valvole di non ritornoMaximum working pressure for valves 16–63 (1/2”–2”) 16 bar (232 psi) / Pressione di esercizio ammissibile per valvole 1/2”-2” 16 bar (232 psi)
Check Valve Plain Sockets Stainless Steel Spring Seals / Valvola di non ritorno radiale con attacchi BS a incollaggio e molla in acciaio inox
Nominal SizeMisura Nominale
Code / CodiceEPDM
Code / Codice FPM L Z H Weight (GR)
Peso
1/2" CAACVA0200 CAACVA0200V 17 46 78 88
3/4" CAACVA0250 CAACVA0250V 20 52 90 144
1" CAACVA0320 CAACVA0320V 23 60 104 200
11/4" CAACVA0400 CAACVA0400V 27 68 120 304
11/2" CAACVA0500 CAACVA0500V 31 78 140 480
2" CAACVA0630 CAACVA0630V 38 93 169 800
Check Valve Plain Sockets PTFE Coated Spring EPDM Seals / Valvola di non ritorno radiale con attacchi BS a incollaggio e molla rivestita in PTFE con Guarnizioni EPDM
Nominal SizeMisura Nominale
CodeCodice L Z H Pack
ImballoWeight (GR)
Peso
3/8" CAACVAT0160 16 46 78 S 88
1/2" CAACVAT0200 17 46 78 S 88
3/4" CAACVAT0250 20 52 90 S 144
1" CAACVAT0320 23 60 104 M 200
11/4" CAACVAT0400 27 68 120 M 304
11/2" CAACVAT0500 31 78 140 M 480
2" CAACVAT0630 38 93 169 M 800
# Refer to metric equivalent
A-BK1AEPDM/FPM
A-CVAEPDM/FPM
A-CVA-T
1
1
2
2
A A
B B
SHEET
Edition "A"
Area:
Part Number:
Polypipe Italia S.r.l.Loc. Pianmercato 5C/5D16044 Monleone di Cicagna (GE)ItalyTel. 0039 0185 92399 r.a.Fax 0039 0185 92699www.polypipeitalia.com
PPPPoooollllyyyyppppiiiippppeeee IIIIttttaaaalllliiiiaaaa
All dimensions inmm unlessotherwise specificied
Designed dy:
Technical Dep.
Toll No:
1Drown Date:
12/2013Scale:
This information is for guidance purposes only and mustnot be reproduced in whole or in part without thepermission of Polypipe Italia.Note: The copyright in this drawing is the property ofPolypipe Italia, and neither the drawing nor any art ofit, nor any information contained therin, shall bereproduced or dislclosed to any third party other than forthe purpose of the use of Polypipe Italia. Copyright2011 Polypipe. All rights reserved.
Projection - third angleunless specified otherwise
WeigHt: (gr)
EFFAST
H
L LZ
C
E
B
D
89
ABS
ABS air release valves BS / ABS Valvole sfogo aria British StandardNP10/16 blanking flanges available, For gaskets see Accessories section / Disponibili flange cieche PN10/16, per le guarnizioni consultare la sezione Accessori
Air Release Valve Plain Sockets with Seals / Valvola sfogo aria radiale con manicotti incollaggio British Standard con Guarnizioni EPDM
Nominal SizeMisura Nominale
Code / CodiceEPDM
Code / Codice FPM L Z H Pack
ImballoWeight (GR)
Peso
3/8" CAAAVA0160 CAAAVA0160V 16 46 78 S 88
1/2" CAAAVA0200 CAAAVA0200V 17 46 78 S 88
3/4" CAAAVA0250 CAAAVA0250V 20 52 90 S 144
1" CAAAVA0320 CAAAVA0320V 23 60 104 M 200
11/4" CAAAVA0400 CAAAVA0400V 27 68 120 M 304
11/2" CAAAVA0500 CAAAVA0500V 31 78 140 M 480
2" CAAAVA0630 CAAAVA0630V 38 93 169 M 800
# Refer to metric equivalent
ABS Electrically Actuated Double Union Ball Valves BS / ABS Valvole a sfera radiali con manicotti incollaggio British Standard con attuatore elettrico(220 — 240 Volt) (110 Volt)
Plain Sockets EPDM Seals / Valvola a sfera radiale con manicotti ad incollaggio British Standard a comando elettrico guarnizioni in EPDM
Nominal SizeMisura Nominale
CodeCodice
Weight (GR)Peso
1/2" BAAEBKY0200 1840
3/4" BAAEBKY0250 1900
1" BAAEBKY0320 1900
11/4" BAAEBKY0400 2050
11/2" BAAEBKY0500 2250
2" BAAEBKY0630 2650
21/2" BAAEBKY0750 5400
3" BAAEBKY0900 8000
4" BAAEBKY1100 8000
# Refer to metric equivalent
ABS pneumatically actuated double union ball valves fail safe closed BS / ABS Valvola a sfera radiale con manicotti ad incollaggio British Standard a comando pneumatico – Doppio Effetto guarnizioni in EPDM
Plain Sockets EPDM Seals / Valvola a sfera radiale con manicotti ad incollaggio British Standard a comando pneumatico – Doppio Effetto guarnizioni in EPDM
Nominal SizeMisura Nominale
CodeCodice
1/2" BAAPBK0200
3/4" BAAPBK0250
1" BAAPBK0320
11/4" BAAPBK0400
11/2" BAAPBK0500
2" BAAPBK0630
21/2" BAAPBK0750
3" BAAPBK0900
4" BAAPBK1100
# Refer to metric equivalent
A-AVA
A-EBK
A-PBK
See Dimension at Pag. 52 / Vedi Dimensioni a Pag. 52
See Dimension at Pag. 56 / Vedi Dimensioni a Pag. 56
90
ABS Red Pipe & FittingsRaccordi e Tubi in ABS Rosso
91
ABS Red PipesFor dimensions and technical details see articles in ABS / Per le dimensioni e i dettagli tecnici vedi gil articoli in ABS
90o Bend / Curva 90°
Nominal SizeMisura Nominale
CodeCodice
PackImballo
Weight (GR)Peso
3/4" RAACUA025R M 50
45o Elbow / Gomito 45°
Nominal SizeMisura Nominale
CodeCodice
PackImballo
Weight (GR)Peso
3/4" RAAGYA025R M 30
Socket / Manicotto
Nominal SizeMisura Nominale
CodeCodice
PackImballo
Weight (GR)Peso
3/4" RAAMAA025R M 23
90o Tee / Raccordo a T 90°
Nominal SizeMisura Nominale
CodeCodice
PackImballo
Weight (GR)Peso
3/4" RAATIA025R M 24
Cap / Calotta
Nominal SizeMisura Nominale
CodeCodice
PackImballo
Weight (GR)Peso
3/4" RAACAA025R S 18
Union with O-ring / Bocchettone con 0’ring
Nominal SizeMisura Nominale
CodeCodice
PackImballo
Weight (GR)Peso
3/4" RAABOA025R M 18
ABS Red Pipes / Tubo
Nominal SizeMisura Nominale
CodeCodice
PackImballo
Weight (GR)Peso
3/4" TAAT16025R M 1000
# Refer to metric equivalent
CUA
GYA
MAA
TIA
CAA
BOA
TAAT
ABS Red Pipe & Fittings / Raccordi e Tubi in ABS Rosso
ABS Red Pipe & FittingsRaccordi e Tubi in ABS Rosso
92
PPH Fittings & ValvesRaccordi e Valvole in PPH
93
Polypropylene Pipe SystemsPolypipe Effast has developed a range of polypropylene valves and
fittings and will continue to increase the range of products.
Polypropylene pipe work systems are widely used in industrial
processing applications, because of its good characteristics.
Polypropylene offers good resistance to abrasion, good thermal
properties and is suitable for working at higher temperatures than
PVCu and ABS.
ColourPolypropylene material is beige-grey in colour.
Chemical ResistancePolypropylene has good chemical resistance. It is resistant to
acids, alkalis, salts and to a number of organic solvents.
StandardsIndividual products are in compliance with appropriate
British and European Standards:
ASTM D 4101-06 Polypropylene compounds according to
PP0110B56000 classification.
DIN 16962 PP-H fittings for socket and butt welding,
dimensions.
EN ISO 15494 Plastics piping systems in PP-H for Industrial
applications.
Pressure RatingMaximum 10 bar at 20°C unless otherwise stated.
PP-H in sub-zero temperaturesPP-H Pipe systems are suitable for temperatures as low as -10°C,
however it is necessary as with any other pipeline to take preventative
measures to ensure the pipeline fluid does not freeze, as freezing
would cause subsequent damage to the system.
Thermal expansionThe thermal coefficient of linear expansion for PP-H is
15 x 10-5m/m.°C
It is necessary in certain situations to make special provision for this
expansion and contraction. Thermal expansion of PP-H is compared
with other materials, in the following chart.
Sistema di tubazioni in PolipropilenePolypipe Effast ha sviluppato una gamma di valvole e raccordi in
polipropilene; una gamma che sarà ancora incrementata.
I sistemi in Polipropilene sono largamente usati nelle applicazioni
di tipo industriale che meglio sposano le buone caratteristiche di
questo materiale: buona resistenza meccanica, buone proprietà
termiche e maggiore resistenza alle alte temperature rispetto al
PVCu ed all’ABS.
ColoreIl colore del polipropilene è grigio - sabbia.
Resistenza ChimicaIl polipropilene ha una buona resistenza chimica.
Resiste agli acidi, ai prodotti alcalini, ai sali e a un certo numero
di solventi.
StandardsI prodotti ottenuti sono conformi alle norme Inglesi ed
Europee:
ASTM D 4101-06 Compound di polipropilene in accordo alla
classificazione PP0110B56000.
DIN 16962 Raccordi in PP-H per saldatura nel bicchiere e di
testa, dimensioni.
EN ISO 15494 Sistemi di componenti (Tubi, Raccordi e Valvole)
in PP-H per applicazioni industriali.
Pressione di EsercizioLa pressione massima è di 10 bar a 20°C se non indicato
diversamente.
PPH a temperature sotto lo zeroI sistemi in polipropilene possono resistere a temperature fino a
-10°C, condizioni nelle quali è comunque necessario prevenire il
congelamento dei fluidi trasportati mediante l’uso di antigelo
appropriati. Infatti, il congelamento dei fluidi trasportati potrebbe
danneggiare le tubazioni.
Dilatazione termicaIl coefficiente di dilatazione termica lineare del PPH è di 15 x 10-5 m/m C° .
In determinate condizioni è necessario utilizzare particolari
cautele per far fronte alle dilatazioni e contrazioni del materiale.
La dilatazione termica del PPH è confrontata con altri materiali
nella tabella che segue:
General Information Temperature range -10°C to +110°C
Informazioni Generali Range di temperatura da -10°C a +110°C
Polipropilene
Acciao dolce
Acciao Inossidabile 18/8
Rame
Polypropylene / Polipropilene
PPH Fittings & ValvesRaccordi e Valvole in PPH
94
Socket fusion welding / Polifusione nel Bicchiere
The Effast Polypropylene range is connected by socket fusion welding.Socket fusion welding in dimensions of 16mm to 110mm, however
special reinforcement collars will be required for 16mm joints.
The principle of socket fusion welding is constant however small
differences in technique may occur on machinery from different
suppliers. It is important to note that only like materials can be
joined.
Below are details of the socket fusion process and illustrations to
show the process.
During the process strict adherence to the safety protocols should
be given at all times.
Preparing the equipment.It is possible to use hand held socket fusion machines when joining
materials in dimensions from 20mm to 63mm, however a bench
top machine is preferred if any quantity of joints is required. The
equipment should be clean and in good working order before any
operation takes place. Careful attention should be given when
following the tool set up as shown in the machine protocols. After
the tool set up is completed the heater should be allowed to heat
for 10 to 15 minutes, until the joining tools have reached their
required temperature. A digital thermometer should be used to
check the temperature before welding commences. It should be
noted that during operation the welding area should be protected
from draughts, dust and adverse weather conditions likely to
corrupt the joint integrity.
Preparing the pipe and fittings.The pipe in all cases should be cut with a sharp set of pipe cutters
suitable for cutting plastic piping, as this will provide a square end
suitable for socket fusion welding. It is important to ensure both
the pipes and the fittings are clean and free from oil, water and
grit before heating takes place. The pipe is peeled to remove the
oxidised layer of material caused by UV radiation from the joint
area. After the pipe is peeled, both the interior of the fitting and
the peeled area of the pipe may be wiped with an alcohol wipe.
Ensure there are no scrapings or chips of material attached to the
pipe.
Technical Information.The socket fusion of PP requires temperatures between 250 and
270 degrees Celsius on the heating tool before joining can be
undertaken. Joining is determined by depth and shear pressure
as the two preheated parts are brought together, one inside the
other. The necessary times relevant to the joining process are;
heating time, change over time, fixing time and cooling time.
These are shown in the table.
Il polipropilene EFFAST è unito tramite sistema di Polifusione nel bicchiere.Il sistema di polifusione nel bicchiere interessa le dimensioni da
16 mm a 110 mm con la precisazione che per i diametri da 16 mm
speciali collari di rinforzo potranno essere necessari.
In linea di principio la saldatura a bicchiere segue sempre alle
stesse regole, anche se alcune piccole differenze potrebbero
manifestarsi nella tecnica di assemblaggio utilizzando saldatrici di
fornitori diversi. Occorre comunque sottolineare il fatto che solo
materiali simili possono essere saldati insieme.
Di seguito in questa sezione viene illustrato il processo di
polifusione nel bicchiere; nel corso del processo occorre rispettare
scrupolosamente i protocolli di sicurezza.
Fase di preparazione. Se occorre saldare dimensioni fra i 20 mm ed i 63 mm è possibile
usare macchine saldatrici manuali; comunque, una saldatrice
da banco è preferibile se una certa quantità di giunzioni è
necessaria. La saldatrice deve essere pulita ed in buono stato di
funzionamento prima di cominciare le operazioni. La massima
attenzione deve essere prestata nel seguire le istruzioni operative
della macchina saldatrice; in particolare, una volta completate le
operazioni preliminari, occorre lasciar riscaldare la saldatrice per
10 / 15 minuti fino a che la macchina raggiunge la temperatura
richiesta.
E’ consigliabile l’uso di un termometro digitale per controllare la
temperatura prima che la saldatura abbia inizio; inoltre, durante
tutta l’operazione di saldatura l’area interessata dalla saldatura
deve essere protetta da ogni elemento (dalla polvere alle avverse
condizioni atmosferiche) che possa inficiare il processo.
Preparazione dei tubi e dei raccordi.
I tubi devono essere tagliati utilizzando un set di taglia tubi
affilati ed idonei al taglio di materiale plastico; ciò renderà
possibile disporre di estremità ben definite, adatte alla saldatura.
É importante assicurarsi che sia i tubi che i raccordi siano puliti
e non contaminati da olio, acqua e sabbia nel momento in
cui la saldatura inizia. In quel momento i tubi sono levigati in
corrispondenza della zona da saldare così da rimuovere il sottile
strato di materiale ossidato dai raggi solari; successivamente, sia la
superficie levigata del tubo sia l’interno dei raccordi devono essere
puliti con uno straccio imbevuto di alcol. Occorre infine assicurarsi
che non vi sia alcun residuo attaccato ai tubi.
Informazioni Tecniche.La saldatura a bicchiere del Polipropilene richiede temperature
fra i 250 ed i 270 gradi Celsius (misurati sulla saldatrice) prima
che il processo di saldatura possa essere avviato mediante
accoppiamento delle due parti preriscaldate, una dentro l’altra. Il
95
Polypropylene / Polipropilene
The welding process.After the set up and preparation has been completed in line with
the machine instructions guide. The newly prepared pipes and
fittings can be introduces to the heat source ensuring that both
the pipe and the fitting are entered to the correct depth. They
are then allowed to heat for the pre determined time. A bead of
molten material should be visible forming on both the pipe and
the fitting as heating takes place. When the time has elapsed, the
pipe and fitting can be removed from the heat source. A change
over time is shown on the table, this should be adhered to. The
two parts should be joined together ensuring that the pipe is
entered to the stop point inside the fitting. The joint should be
held in position, and then allowed to cool in line with the correct
table of parameters. A uniform double weld bead should be visible
around the neck of the fitting, and a single weld bead should be
evident inside the fitting. Testing can take place 1 hour after the
last weld is complete.
processo di saldatura si compone quindi di alcune fasi consecutive:
tempo di riscaldamento, tempo di accoppiamento, tempo di
fissaggio ed incollaggio. Dette fasi successive sono indicate nella
tavola a piè di pagina.
Il processo di saldatura.Una volta che la saldatrice risulti pronta (avendo completato i
passaggi preliminari di funzionamento della macchina) i tubi ed
i raccordi preparati per essere uniti possono essere avvicinati alla
fonte di calore facendo molta attenzione a che tubi e raccordi
siano inseriti nella macchina alla corretta profondità. A questo
punto tubi e raccordi sono riscaldati per un periodo di tempo
predeterminato; un cordone di materiale fuso apparirà sulla
superficie dei tubi e dei raccordi mano a mano che il processo
avanza. Quando il tempo è trascorso, tubi e raccordi possono
essere rimossi dalla fonte di calore e le due parti possono essere
assemblate insieme avendo cura di inserire il tubo fino al punto di
battuta interno al raccordo.
L’insieme deve allora essere messo in opera per poi raffreddarsi
secondo il tempo richiesto dai corretti parametri. Un doppio
cordone uniforme di materiale fuso sarà visibile sul collo del tubo
mentre un singolo cordone di materiale fuso risulterà all’interno
del raccordo.
Trascorsa un’ora dalla saldatura sarà possibile avviare i test di
funzionamento.
Heating times for socket fusion joints in PP. (DVS 2207, part 11) / Tempo di riscaldamento per saldature a bicchierePipe od in mm
Diam. Tubo in mmMin wall thickness in mmMinimo Spessore in mm
Heating time in secsTempo di riscaldamento in secondi
Cooling time in minsTempo di raffeddamento in secondi
16 2.0 5
20 2.5 5 2
25 2.7 7
32 3.0 8
40 3.7 12 4
50 4.6 18
63 3.6 24
75 4.3 30 6
90 5.1 40
110 6.3 50 8
Socket fusion welding / Polifusione nel Bicchiere
96
Jointing methods / Metodi di giunzione
Jointing methods. The Effast Polypropylene range is jointed by socket fusion however there are two further jointing techniques.For reference only the images below detail the socket fusion and also butt fusion and electro fusion techniques.
Metodi di giunzione Il sistema Polipropilene di Effast è unito mediante saldatura a bicchiere, tuttavia ci sono altre due tecniche di giunzione.Solo per informazione le immagini seguenti illustrano la saldatura a bicchiere e anche le tecniche di saldatura di testa e di elettrosaldatura.
Socket fusionSaldatura a bicchiere
Butt fusionSaldatura di testa
Electro fusionElettrofusione
Individual parts / Elementi Individual parts / Elementi Individual parts / Elementi
Heating / Riscaldamento Heating / Riscaldamento Heating / Riscaldamento
Finished joint / Saldatura finita Finished joint / Saldatura finita Finished joint / Saldatura finita
Heating elementElemento riscaldante
Pipe or FittingTubo o raccordo
Pipe or FittingTubo o raccordo
Heating spigotTerminale riscaldante
Heating socketManicotto riscaldante
Heating elementElemento riscaldante
Pipe or FittingTubo o raccordo
Electro-fusion socketManicotto di saldatura
Pipe / tubo
Welding leadsSpinotti di saldatura
97
Polypropylene / Polipropilene
Polypropylene socket fusion fittings / Raccordi in Polipropilene fusione a bicchiere
Socket Fusion Elbow 90° Plain / Gomito 90° fusione a bicchiere
Nominal SizeMisura Nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
20 RHPGOH0200 16 11 29 S 17
25 RHPGOH0250 18 14 36 M 28
32 RHPGOH0320 20 18 43 M 45
40 RHPGOH0400 22 22 53 L 70
50 RHPGOH0500 25 27 66 L 130
63 RHPGOH0630 30 32 82 L 230
Socket Fusion Elbow 45° Plain / Gomito 45° fusione a bicchiere
Nominal SizeMisura Nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
20 RHPGYH0200 16 5 29 S 15
25 RHPGYH0250 18 6 36 M 24
32 RHPGYH0320 20 8 43 M 36
40 RHPGYH0400 22 10 53 M 58
50 RHPGYH0500 25 12 66 L 92
63 RHPGYH0630 30 14 82 L 170
Socket Fusion Tee 90° Plain / Raccordo a T 90° fusione a bicchiere
Nominal SizeMisura Nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
20 RHPTIH0200 16 11 29 M 20
25 RHPTIH0250 18 14 36 M 37
32 RHPTIH0320 20 18 43 M 58
40 RHPTIH0400 22 22 53 M 92
50 RHPTIH0500 25 27 66 L 146
63 RHPTIH0630 30 32 82 L 280
Socket Fusion Socket Fusion Socket Plain / Manicotto fusione a bicchiere
Nominal SizeMisura Nominale
CodeCodice L Z E Pack
ImballoWeight (GR)
Peso
20 RHPMAH0200 3 16 29 S 12
25 RHPMAH0250 4 18 36 M 18
32 RHPMAH0320 3 20 43 M 28
40 RHPMAH0400 4 22 53 M 42
50 RHPMAH0500 4 25 66 L 65
63 RHPMAH0630 4 30 82 L 104
# Refer to metric equivalent
GOH
GYH
TIH
MAH
98
Polypropylene socket fusion fittings / Raccordi in Polipropilene fusione a bicchiere
Socket Fusion Reducing Socket Plain / Riduzione lunga fusione a bicchiere
Nominal SizeMisura Nominale
CodeCodice L1 L2 Z E1 E2 Pack
ImballoWeight (GR)
Peso
25 x 20 RHPRLH025B 16 18 6 29 36 S 11
32 x 20 RHPRLH032B 16 20 6 29 43 S 15
32 x 25 RHPRLH032C 18 20 6 36 43 S 18
40 x 25 RHPRLH040C 18 22 10 36 53 M 23
40 x 32 RHPRLH040D 20 22 10 43 53 M 25
50 x 32 RHPRLH050D 20 25 12 43 66 M 48
50 x 40 RHPRLH050E 22 25 12 53 66 M 53
63 x 32 RHPRLH063D 20 30 18 43 82 M 71
63 x 40 RHPRLH063E 22 30 17 53 82 M 78
63 x 50 RHPRLH063F 25 30 13 66 82 M 80
Socket Fusion Cap Plain / Calotta fusione a bicchiere
Nominal SizeMisura Nominale
CodeCodice L H E Pack
ImballoWeight (GR)
Peso
20 RHPCAH0200 16 27 29 S 9
25 RHPCAH0250 18 30 36 S 13
32 RHPCAH0320 20 34 43 M 22
40 RHPCAH0400 22 38 53 M 33
50 RHPCAH0500 25 44 66 M 52
63 RHPCAH0630 30 51 82 M 86
Socket Fusion Stub Flange (Serrated) Plain / Collare per flange rigato fusione a bicchiere
Nominal SizeMisura Nominale
CodeCodice L Z d S E Pack
ImballoWeight (GR)
Peso
20 RHPQRH0200 16 3 27 6 34 S 7
25 RHPQRH0250 18 3 33 7 41 S 11
32 RHPQRH0320 20 3 41 7 51 S 15
40 RHPQRH0400 22 3 50 8 61 M 24
50 RHPQRH0500 25 3 61 8 73 M 34
63 RHPQRH0630 30 3 76 9 90 M 60
Socket Fusion Union Plain. Supplied with EPDM O ring–for FPM O ring see Accessories section / Bocchettone fusione a bicchiere con guarnizioni in EPDM o FPM. Vedi nella sezione accessori BOHNominal SizeMisura Nominale
CodeCodice L Z1 Z2 F E Pack
ImballoWeight (GR)
Peso
20 RHPBOH0200 16 3 11 1" 42 S 38
25 RHPBOH0250 18 3 13 11/4" 52 M 58
32 RHPBOH0320 20 3 15 11/2" 59 M 80
40 RHPBOH0400 22 7 16 2" 72 M 118
50 RHPBOH0500 25 3 26 21/4" 79 M 170
63 RHPBOH0630 30 11 25 23/4" 96 M 285
# Refer to metric equivalent
RLH
CAH
QRH
BOH
99
Polypropylene / Polipropilene
Threaded fittings PPH fiberglass reinforced / Raccordi Filettati in PPH caricato fibre vetro
Plug / Tappo
R (EN UNI 10226)Nominal SizeMisura Nominale
CodeCodice L H O Weight (GR)
Peso
1/2” RHPTAEH0200 15.0 29 24 10
3/4” RHPTAEH0250 16.3 30 30 15
1” RHPTAEH0320 19.1 33 36 25
11/4” RHPTAEH0400 21.4 39 46 40
11/2” RHPTAEH0500 21.4 39 50 45
2” RHPTAEH0630 25.7 43 65 80
Reducing Bush / Riduzione
R x Rp (EN UNI 10226)Nominal SizeMisura Nominale
CodeCodice L1 L2 Z O Weight (GR)
Peso
3/4”x 1/2” RHPRCEH025B 16.3 15.0 13.3 30 13
1”x 3/4” RHPRCEH032C 19.1 16.3 14.8 36 20
11/4”x 1” RHPRCEH040D 21.4 19.1 16.3 46 35
11/2”x 11/4” RHPRCEH050E 21.4 21.4 14.0 55 37
2”x 11/2” RHPRCEH063F 25.7 21.4 18.3 65 67
Reducing Nipple / Nipplo ridotto
R x R (EN UNI 10226)Nominal SizeMisura Nominale
CodeCodice L1 L2 H O Weight (GR)
Peso
3/4” x 1/2” RHPNREH025B 13.3 15.0 43 30 17
11/4” x 1” RHPNREH032C 19.1 16.3 47 36 26
11/4” x 1” RHPNREH040D 21.4 21.4 56 46 42
11/2” x 11/4” RHPNREH050E 21.4 21.4 58 50 48
2” x 11/2” RHPNREH063F 25.7 21.4 62 65 81
Nipple / Nipplo
R x R (EN UNI 10226)Nominal SizeMisura Nominale
CodeCodice L H O Weight (GR)
Peso
1/2” RHPNIEH0200 11 32 19 11
3/4” RHPNIEH0250 11 42 24 9
1” RHPNIEH0320 15 42 30 11
11/4” RHPNIEH0400 16 50 36 18
11/2” RHPNIEH0500 19 58 36 28
2” RHPNIEH0630 21 58 50 46
Adaptor Socket / Manicotto Adattatore
d x Rp (EN UNI 10226)Nominal SizeMisura Nominale
CodeCodice L1 L2 Z E O Weight (GR)
Peso
20 x 1/2” RHPMAT020B 16.5 15 6 28 32 15
25 x 3/4” RHPMAT025C 18.5 16 7 34 36 20
32 x 1” RHPMAT032D 20.5 19 7 43.5 46 32
40 x 11/4” RHPMAT040E 22.5 22 7 50 55 50
50 x 11/2” RHPMAT050F 25.5 22 9 60 65 80
63 x 2” RHPMAT063G 30.5 26 9 78 80 140
# Refer to metric equivalent
NREH
NIEH
MAT
TAEH
RCEH
100
Threaded fittings PPH fiberglass reinforced / Raccordi Filettati in PPH caricato fibre vetro
90° Elbow / Gomito 90°
d x Rp (EN UNI 10226)Nominal SizeMisura Nominale
CodeCodice L Z E Weight (GR)
Peso
1/2” RHPGOEH0200 16 11 29 17
3/4” RHPGOEH0250 18 14 36 28
1” RHPGOEH0320 20 18 43 45
11/4” RHPGOEH0400 22 22 53 70
11/2” RHPGOEH0500 25 27 66 130
2” RHPGOEH0630 30 32 82 230
90° Tee / Raccordo T 90°
d x Rp (EN UNI 10226)Nominal SizeMisura Nominale
CodeCodice L Z E Weight (GR)
Peso
1/2” RHPTIEH0200 16 11 29 20
3/4” RHPTIEH0250 18 14 36 37
1” RHPTIEH0320 20 18 43 58
11/4” RHPTIEH0400 22 22 53 92
11/2” RHPTIEH0500 25 27 66 146
2” RHPTIEH0630 30 32 82 280
Socket / Manicotto
d x Rp (EN UNI 10226)Nominal SizeMisura Nominale
CodeCodice Z L E Weight (GR)
Peso
1/2” RHPMAT0200 3 16.5 30.5 12
3/4” RHPMAT0250 3.5 18.5 36 18
1” RHPMAT0320 3 20.5 43.5 28
11/4” RHPMAT0400 4 22.5 53.5 42
11/2” RHPMAT0500 4 25.5 66 65
2” RHPMAT0630 4 30 82 104
Threaded Union with O-Ring with EPDM O ring can also beSupplied with FPM O ring / Bocchettone con guarnizioni EPDM. A richiesta può essere fornito con O’ring FPM
Nominal SizeMisura Nominale
CodeCodice L Z1 Z2 F E Weight (GR)
Peso
1/2” RHPBOEH0200 16 3 11 1” 42 38
3/4” RHPBOEH0250 18 3 13 11/4” 52 58
1” RHPBOEH0320 20 3 15 11/2” 59 80
11/4” RHPBOEH0400 22 7 16 2” 72 118
11/2” RHPBOEH0500 25 3 26 21/4” 79 170
2” RHPBOEH0630 30 11 25 23/4” 96 285
# Refer to metric equivalent
TIEH
MAT
BOEH
GOEH
101
Polypropylene / Polipropilene
Polypropylene industrial ball valves / Valvole a sfera serie Industria in PolipropilenePN = Maximum working pressure (bar) at 20°C. Nominal Pressure: 10 bar (145 psi) / Pressione di esercizio ammissibile per valvole 10 bar (145 psi)
Double union, metric Fusion Socket / Valvola radiale con manicotti fusione a bicchiere
Nominal SizeMisura Nominale
Code / CodiceEPDM
Code / CodiceFPM D Inch DN L Z H E B C L/m ∆p=1bar Weight (GR)
Peso
20 BHPBKH0200 BHPBKH020V 1/2” 15 20.5 61 102 65 65 82 700 200
25 BHPBKH0250 BHPBKH025V 3/4” 20 20.5 61 102 65 65 82 700 200
32 BHPBKH0320 BHPBKH032V 1” 25 20.5 61 102 65 65 82 700 200
40 BHPBKH0400 BHPBKH040V 1 1/4” 32 22.5 73 118 78 76 92 1000 300
50 BHPBKH0500 BHPBKH050V 1 1/2” 40 25.5 89 140 85 88 105 1700 490
63 BHPBKH0630 BHPBKH063V 2” 50 30 106 166 102 104 123 3200 820
Double union, BSP threaded / Valvola radiale con Manicotti filettati BSP
Nominal SizeMisura Nominale
Code / CodiceEPDM
Code / CodiceFPM D Inch DN L Z H E B C L/m ∆p=1bar Weight (GR)
Peso
20 BHPBKEH020B BHPBKEH020V 1/2” 15 20.5 61 102 65 65 82 700 200
25 BHPBKEH025C BHPBKEH025V 3/4” 20 20.5 61 102 65 65 82 700 200
32 BHPBKEH032D BHPBKEH032V 1” 25 20.5 61 102 65 65 82 700 200
40 BHPBKEH040E BHPBKEH040V 1 1/4” 32 22.5 73 118 78 76 92 1000 300
50 BHPBKEH050F BHPBKEH050V 1 1/2” 40 25.5 89 140 85 88 105 1700 490
63 BHPBKEH063G BHPBKEH063V 2” 50 30 106 166 102 104 123 3200 820
# Refer to metric equivalent
Polypropylene check valves / Valvole di non ritorno in PolipropileneFor dimensions see PVCu equivalent–PVCu Section. Nominal Pressure: 10 bar (145 psi) / Pressione di esercizio ammissibile per valvole 10 bar (145 psi)
Check Valve Fusion Sockets EPDM/FPM Seals / Valvola di non ritorno con manicotti fusione a bicchiere con O’ring in EPDM/FPM
Nominal SizeMisura Nominale
Code / CodiceEPDM
Code / CodiceFPM D Inch DN L Z H E L/m ∆p=1bar Weight (GR)
Peso
20 CHPCVH0200 CHPCVH020V 1/2” 15 20.5 61 102 65 700 170
25 CHPCVH0250 CHPCVH025V 3/4” 20 20.5 61 102 65 700 170
32 CHPCVH0320 CHPCVH032V 1” 25 20.5 61 102 65 700 170
40 CHPCVH0400 CHPCVH040V 1 1/4” 32 22.5 73 118 78 1000 250
50 CHPCVH0500 CHPCVH050V 1 1/2” 40 25.5 89 140 85 1700 425
63 CHPCVH0630 CHPCVH063V 2” 50 30 106 166 102 3200 710
Check Valve BSP Threaded EPDM/FPM Seals / Valvola di non ritorno con manicotti filettati BSP
Nominal SizeMisura Nominale
Code / CodiceEPDM
Code / CodiceFPM D Inch DN L Z H E L/m ∆p=1bar Weight (GR)
Peso
20 BSPF CHPCVEH020B CHPCVEH020V 1/2” 15 22 61 102 65 700 170
25 BSPF CHPCVEH025C CHPCVEH025V 3/4” 20 22 61 102 65 700 170
32 BSPF CHPCVEH032D CHPCVEH032V 1” 25 22 61 102 65 700 170
40 BSPF CHPCVEH040E CHPCVEH040V 1 1/4” 32 26 73 118 78 1000 250
50 BSPF CHPCVEH050F CHPCVEH050V 1 1/2” 40 31 89 140 85 1700 425
63 BSPF CHPCVEH063G CHPCVEH063V 2” 50 38 106 166 102 3200 710
# Refer to metric equivalent
BKHEPDM/FPM
BKEHEPDM/FPM
CVHEPDM/FPM
CVEHEPDM/FPM
1
1
2
2
A A
B B
SHEET
Edition "A"
Area:
Part Number:
Polypipe Italia S.r.l.Loc. Pianmercato 5C/5D16044 Monleone di Cicagna (GE)ItalyTel. 0039 0185 92399 r.a.Fax 0039 0185 92699www.polypipeitalia.com
PPPPoooollllyyyyppppiiiippppeeee IIIIttttaaaalllliiiiaaaa
All dimensions inmm unlessotherwise specificied
Designed dy:
Technical Dep.
Toll No:
1Drown Date:
12/2013Scale:
This information is for guidance purposes only and mustnot be reproduced in whole or in part without thepermission of Polypipe Italia.Note: The copyright in this drawing is the property ofPolypipe Italia, and neither the drawing nor any art ofit, nor any information contained therin, shall bereproduced or dislclosed to any third party other than forthe purpose of the use of Polypipe Italia. Copyright2011 Polypipe. All rights reserved.
Projection - third angleunless specified otherwise
WeigHt: (gr)
EFFAST
H
L LZ
C
E
B
D
1
1
2
2
A A
B B
SHEET
Edition "A"
Area:
Part Number:
Polypipe Italia S.r.l.Loc. Pianmercato 5C/5D16044 Monleone di Cicagna (GE)ItalyTel. 0039 0185 92399 r.a.Fax 0039 0185 92699www.polypipeitalia.com
PPPPoooollllyyyyppppiiiippppeeee IIIIttttaaaalllliiiiaaaa
All dimensions inmm unlessotherwise specificied
Designed dy:
Technical Dep.
Toll No:
1Drown Date:
12/2013Scale:
This information is for guidance purposes only and mustnot be reproduced in whole or in part without thepermission of Polypipe Italia.Note: The copyright in this drawing is the property ofPolypipe Italia, and neither the drawing nor any art ofit, nor any information contained therin, shall bereproduced or dislclosed to any third party other than forthe purpose of the use of Polypipe Italia. Copyright2011 Polypipe. All rights reserved.
Projection - third angleunless specified otherwise
WeigHt: (gr)
EFFAST
H
L LZ
C
E
B
D
102
Polypropylene pressure pipes / Tubi in Polipropilene
Pressure Pipe / Tubi per pressione
Nominal SizeMisura Nominale
CodeCodice sp. mm Weight (GR)
Peso
20 THPT100200 1.9
25 THPT100250 2.3
32 THPT100320 2.9
40 THPT100400 3.7
50 THPT100500 4.6
63 THPT100630 5.8
75 THPT100750 6.8
90 THPT100900 8.2
110 THPT101100 10.0
# Refer to metric equivalent
103
Accessories / Accessori
Solvent cement and PTFE tape / Nastro in Teflon (PTFE) raccomandato per sigillare filetti
PTFE Tape. Recommended for sealing threaded joints.
Size / Misura Code / Codice Weight (GR)Peso
12mm GGPTEF0120 10
Glue / Colla
Size / Misura Code / Codice
125ml PLUMEFF1250
250ml PLUMEFF2500
500ml PLUMEFF5000
1000ml PLUMEFF1000
Glue for Lagre Diameters / Colla per grandi diametri
Size / Misura Code / Codice
500ml PLUMBIGS0500
1000ml PLUMBIGS1000
Cleaner / Detergente
Size / Misura Code / Codice
1000ml PLUDET1000
# Refer to metric equivalent
Effast-Tite is a solution of polyvinyl in a mixture of solvents containing tetrahydrofuran to cement PVC pipes and fittings developed with a special solvent that evaporate fast. When flexible pipes are cemented respect one our of drying time, for immediate testing use maximum 3 bars after twenty minutes (up to 160 mm).For flexible pipe joint waiting at last 1 hourIt can be used with or without cleaner.
La colla Effast-Tite è una soluzione di polivinile in una miscela di solventi che contengono tetraidrofurano (TFH) per incollare tubi e raccordi in PVC sviluppata con un solvente speciale che evapora velocemente. Quando i tubi flessibili sono incollati aspettare un’ora(correggere da our a hour) per l’asciugatura. Per una prova immediata non usare più di 3 bar dopo 20 minuti (fino a 160 mm) Per incollaggi con tubi flessibili attendere almeno un’oraPuò essere usata con o senza detergente.
Large-Tite is developed with special solvents that evaporate slowly. Pressure testing after 24 h. (above 10°), do not use this solvent cement below 5°C, during the first 10 minutes do not charge mechanically.
Large-Tite è sviluppata con un solvente che evapora lentamente. Il test di pressione deve essere effettuato dopo 24 ore (sopra i 10°C), non usare questa colla sotto i 5°C, durante i primi 10 minuti non caricare meccanicamente.
Prepare surface of PVC pipes and fittings cleaning any residual dirt. Can be used with glue containing tetrahydrofuran.
Prepara le superfici dei tubi e dei raccordi in PVC pulendole da sporcizia residua. Può essere usato con colle che contengono tetraidrofurano (TFH).
104
PVC–Pipes PN 10 + PN 16 / Tubi in PVC PN10-PN16
d mm 20°C 30°C 40°C 50°C 60°C
16 80 70 50continuous support
20 90 80 60
25 95 85 65 55 40
32 105 90 70 60 45
40 120 110 90 70 55
50 140 130 110 85 65
63 150 140 120 95 70
75 165 155 135 110 80
90 180 170 150 125 95
110 200 190 170 145 115
125 210 200 185 160 125
140 225 215 195 170 140
160 240 230 210 185 155
200 255 240 225 200 170
225 270 260 240 215 185
PE–Pipes PN 10 / Tubi in PE PN10
d mm 20°C 30°C 40°C 50°C 60°C
20 75 70 65 65 60
25 80 80 75 70 65
32 90 90 85 80 75
40 100 100 95 90 85
50 115 110 105 100 95
63 130 125 120 115 105
75 140 135 130 125 115
90 155 150 145 135 130
110 170 165 160 150 140
125 185 175 170 160 150
140 195 185 180 170 155
160 210 200 190 180 170
200 235 220 210 200 186
225 250 235 220 210 200
225 270 260 240 215 185
PP–Pipes PN 10 / Tubi in PP PN10
d mm 20°C 30°C 40°C 50°C 60°C 80°C 100°C
16 75 70 70 65 65 55 40
20 80 75 70 70 65 60 45
25 85 85 85 80 75 70 50
32 100 95 95 90 85 75 55
40 110 110 105 100 95 85 60
50 125 120 115 110 105 90 70
63 140 135 130 125 120 105 80
75 155 150 145 135 130 115 85
90 165 165 155 150 145 125 95
110 185 180 175 165 160 140 105
125 200 190 185 180 170 150 110
140 210 205 195 190 180 155 115
160 225 225 210 200 190 165 125
180 240 240 225 215 200 170 130
200 250 250 235 225 215 185 135
225 265 260 250 240 230 200 145
PVDF–Pipes PN 10 / Tubi in PVDF PN10
d mm 20°C 30°C 40°C 50°C 60°C 80°C 100°C
16 85 80 75 70 65 60 55
20 95 90 80 75 70 65 60
25 100 95 90 85 80 75 70
32 110 100 95 90 85 80 75
40 125 115 110 100 95 90 80
50 140 130 120 115 110 100 95
63 150 140 130 120 115 105 100
75 165 155 140 130 125 115 110
90 180 165 155 145 135 125 120
110 200 185 175 160 150 140 130
125 210 195 185 170 160 150 140
140 225 210 195 180 170 160 150
160 240 225 210 195 185 170 160
200 255 240 225 210 200 185 175
225 270 255 240 225 215 200 190
Pipe hanger spacing for horizontal piping / Distanza fra portatubi per tubazioni orizzontali
105
Accessories / Accessori
Pipe clips, clamps and brackets / Fascette, Morsetti, portatubiCentral fixing hole 5.5mm diameter / Foro di fissaggio centrale diametro 5,5 millimetri
Pipe Bracket with Safety Clip / Portatubo con clip di sicurezza
Nominal SizeMisura Nominale
CodeCodice B H Pack
ImvalloWeight (GR)
Peso
50 RDRPTD0500 17 71 M 20
63 RDRPTD0630 18 84 M 25
75 RDRPTD0750 19 97 S 33
90 RDRPTD0900 20 113 S 49
110 RDRPTD1100 23 134 S 74
125 RDRPTD1250 25 145 S 95
140 RDRPTD1400 27 167 S 135
160 RDRPTD1600 S 340
# Refer to metric equivalent
PVCu and ABS valve spares / PVCu e ABS Parti di ricambio
PVCu Valve Nut / Ghiere per valvole in PVCu
Inches mm CodeCodice
1/2" 20 BDRGHI0200
3/4" 25 BDRGHI0250
1" 32 BDRGHI0320
11/4" 40 BDRGHI0400
11/2" 50 BDRGHI0500
2" 63 BDRGHI0630
3" 90 BDRGHI0900
4" 110 BDRGHI1100
PVCu Socket End Connectors Plain / Manicotti ad incollaggio in PVCu
Nominal SizeMisura Nominale
CodeCodice
3/8" BERMAN0160
1/2" BERMAN0200
3/4" BERMAN0250
1" BERMAN0320
11/4" BERMAN0400
11/2" BERMAN0500
2" BERMAN0630
21/2" BERMAN0750
3" BERMAN0900
4" BERMAN1100
# Refer to metric equivalent
GHI
MAN
PTD
106
PVCu and ABS valve spares / PVCu e ABS Parti di ricambio
Spring / Molla Teflonata
Inches mm Code / Codice
1/2" 20 CDRMOL0200
3/4" 25 CDRMOL0250
1" 32 CDRMOL0320
11/4" 40 CDRMOL0400
11/2" 50 CDRMOL0500
2" 63 CDRMOL0630
3" 75-90 CDRMOL0900
Spring / Molla Acciao Inox
Inches mm Code / Codice
1/2" 20 CDRMOX0200
3/4" 25 CDRMOX0250
1" 32 CDRMOX0320
11/4" 40 CDRMOX0400
11/2" 50 CDRMOX0500
2" 63 CDRMOX0630
3" 75-90 CDRMOX0900
HBN
KIT
CDR-MOL
CDR-MOX
Industrial and Economic Ball Valve Handle Red and Blue / Maniglie per Valvole Serie “Industria” e Serie “Acqua”
Inches mm Code BlueCodice Blu
Code RedCodice Rosso D (mm)
1/2" BDRHBN0200 BDRHAN0200 20
3/4" BDRHBN0250 BDRHAN0250 25
1" BDRHBN0320 BDRHAN0320 32
11/4" BDRHBN0400 BDRHAN0400 40
11/2" BDRHBN0500 BDRHAN0500 50
2" BDRHBN0630 BDRHAN0630 63
3" BDRHBN0900 BDRHAN0900 75-90
4" BDRHBN1100 BDRHAN1100 110
EPDM/FPM and PTFE Seal Kits for Industrial Ball Valves / EPDM/FPM kits di guarnizioni per Valvole serie “Industria”
Inches mm Code / Codice EPDM
Code / Codice FPM D (mm)
1/2" BDRKIT0200 BDRKIT020V 20
3/4" BDRKIT0250 BDRKIT025V 25
1" BDRKIT0320 BDRKIT032V 32
11/4" BDRKIT0400 BDRKIT040V 40
11/2" BDRKIT0500 BDRKIT050V 50
2" BDRKIT0630 BDRKIT063V 63
21/2" BDRKIT0750 BDRKIT075V 75
3" BDRKIT0900 BDRKIT090V 90
4" BDRKIT01100 BDRKIT0110V 110
# Refer to metric equivalent
107
Material selection
In order to select the most suitable material for a pipe system the
following factors need to be considered –
• The medium or fluid to be conveyed and its chemical composition
• Operating pressure
• Operating temperature
These factors are interlinked and only when all are addressed can
the correct material be selected.
There are a number of properties which are key to the suitability of
a material to fulfil the factors above.
General properties
Density
Is a measure of the mass of a given volume, polymers have the
lowest density of all classes of engineering materials.
Energy content
The amount of energy released during the combustion of the
substance. Polyolefines such as PE, PP and PB contain approximately
the same energy as heating oil at 44MJ/kg.
Recycle fraction
Usually represented by a number between 0 and 1 without units.
Higher fractions indicate materials which are likely to be recycled.
Thermoplastics can be recycled, polyethylene offers one of the
highest recyle factors of polymers at approximately 0.6.
Mechanical properties
Tensile
Tensile testing is performed by the elongation of a test specimen
until it breaks. Values obtained from the resulting curve of stress
against elongation include.
• Yield stress
• Percentage of elongation
• Modulus of elasticity
• Impact
Impact testing is performed to measure the ability of a material to
withstand impact. The use of a notched test is necessary to produce
a break in ductile materials.
Hardness
Testing the hardness of a material involves the application of a
defined load through a defined surface area. Dependent on the
type of test the resulting indentation or penetration is recorded as a
measure of the material hardness.
Scegliere il materiale
Per poter scegliere il miglior materiale per un sistema di tubazione i
seguenti fattori dovrebbero essere presi in considerazione:
• Il fluido che deve essere trasportato e la sua composizione chimica
• La pressione di esercizio
• La Temperatura di esercizio
Questi fattori sono collegati e solo quando tutti sono noti può
essere scelto il corretto materiale.
Ci sono una serie di proprietà che sono fondamentali per l’idoneità
di un materiale per soddisfare i fattori di cui sopra:
Proprietà Generali
Densità
É la misura di massa di un dato volume. I polimeri hanno la più
bassa densità di tutta la classe dei materiali tecnici.
Contenuto energetico
La quantità di energia rilasciata durante la combustione della
sostanza. Le poleolefine come il PE, il PP o il PB contengono circa la
stessa energia dell’olio da riscaldamento: 44 MJ/Kg.
Indice di riciclo
Normalmente è rappresentato da un numero compreso fra 0 e 1
senza unità di misura. Un alto indice indica che il materiale è adatto
al riciclo. I materiali termoplastici possono essere riciclati , il PE ha
uno dei più alti fattori di riciclo dei polimeri, pari a circa 0,6.
Proprietà meccaniche
Prova a trazione
Il test a trazione è effettuato su un provino per allungamento a
trazione fino a rottura. I valori ottenuti dalla curva di allungamento
e rottura includono:
• Carico di snervamento
• Percentuale di allungamento
• Modulo di elasticità
• Resilienza
Il test di resilienza è eseguito per misurare la capacità di un
materiale di resistere all’urto. L’uso di un provino preparato con un
intaglio è necessario per produrre la rottura nei materiali duttili.
Durezza
Il test della durezza di un materiale prevede l’applicazione di una
forza definita su una superficie nota. A seconda del tipo di test (a
penetrazione per es.) i risultati registrano la durezza del materiale.
Material selection / Scegliere il materiale
108
Thermal properties
Thermal expansion coefficient
The rate of expansion or contraction due to a change in
temperature differs between material types. Although the amount
of expansion per metre for each degree change in temperature
may appear small, the expansion of a long pipe length through a
moderate change in temperature can be significant. Where plastics
are to be joined to other materials consideration should be given
to the possible stresses within the connection due to different
coefficient values.
Thermal conductivity
Indication of the transfer of heat through the material. Higher
values indicate a material which allows the passage of heat more
readily. Lower values imply a better insulating material.
Electrical properties
Dielectric strength
The maximum electric field strength a material can intrinsically
withstand without failure of its insulating properties. Poor
conductors usually support electrostatic fields
Surface resistivity
The resistance to the flow of electrical current over the surface of
a material. Engineering plastics are inherently good insulators with
high surface resistance values of 1014 and above. Resistivity can be
reduced through the addition of conductive additives to the base
polymer.
The following is a list of abbreviations used in this catalogue:
ABS Acrylonitrile–Butadiene–Styrene
ASA American Standards Association
BSP British Standard Pipe (Thread)
DIN Deutsche Industrie Normen(German Industrial Standards)
EPDM Ethylene Propylene Rubber
FPM Fluorine Rubber (e.g. Viton)
GR Weight in grammes
ISO International Standardisation Organisation
NBR Nitrile Rubber
NP Nominal Pressure
PE Polyethylene
PP Polypropylene
PTFE Polytetrafluoroethylene (e.g. Teflon)
PVCu Unplasticised Polyvinyl Chloride
SP Standard Pack
PN Pressure Rating
La seguente è la lista di abbreviazioni usate in questo catalogo
ABS Acrilonitrile Butadiene Stirene
ASA Norma Americana
BSP Filettatura BSP
DIN Norma Tedesca
EPDM Gomma Etilenica
FPM Gomma fluorata (Viton)
GR Peso in grammi
ISO Organismo internazionale di Standards
NBR Gomma Nitrilica
NP Pressione nominale (PN)
PE Polietilene
PP Polipropilene
PTFE Politetrafluoroetilene (teflon)
PVCu Clorulo di Polivinile non plastificato
SP Imballo standard
PN Pressione di esercizio
Proprietà termiche
Coefficiente di dilatazione lineare
Il valore di dilatazione o contrazione varia al variare della
temperatura e dipende dal tipo di materiale. Sebbene il grado di
dilatazione per metro per ogni grado di variazione di temperatura
possa apparire piccolo, la dilatazione di un lungo tubo anche per
una piccola variazione di temperatura può essere significativa. Dove
i materiali plastici sono giunti ad altri materiali deve essere preso in
considerazione un possibile stress per la differenza del coefficiente
di dilatazione lineare.
Conducibilità termica
É la capacità di condurre calore di un materiale. Un alto valore
indica che il materiale permette il passaggio del calore più
rapidamente. Un basso valore indica un materiale con una buona
capacità di isolamento.
Proprietà elettriche
Rigidità dielettrica
É il valore limite di campo elettrico oltre il quale si produce
una scarica elettrica attraverso un materiale. Scarsi conduttori
normalmente sopportano campi elettrostatici.
Resistenza superficiale
La resistenza al passaggio di corrente elettrica attraverso la
superficie di un materiale. Tecnopolimeri sono intrinsecamente
buoni isolanti con un alto valore di resistenza superficiale di 1014 e
superiore. La resistenza può essere ridotta con l’aggiunta di additivi
a base polimerica.
109
Picture supplied courtesy of Sterling Hydrotec. Fotografia fornita gentilmente da Sterling Hydrotec.
Comparative properties of PVCu, ABS
Property PVCu-Rigid ABS High Impact
General
Composition (CH2-CH-CI)n (CH2-CH-CH2—CH-CN-C6H4)n
Density (Mg/m³) 1.35 to 1.55 1.03 to 1.07
Energy Content (Mj/kg) 85 to 106 85 to 120
Recycle Fraction 0.15 to 0.25 0.45 to 0.55
Mechanical
Young's Modulus of elasticity (GPa) 2.2 to 3.5 2.1 to 2.8
Elastic Limit (MPa) 35 to 52 40 to 45
Tensile Strength (MPa) 30 to 70 45 to 48
Compressive Strengh (MPa) 55 to 60 55 to 60
Ductility 0.1 to 3 0.06 to 0.07
Endurance Limit (MPa) 27 to 31.2 24 to 27
Fracture Toughness (MPa.m½) 1 to 2 2.3 to 2.6
Hardness Vickers 10.6 to 15.6 5.6 to 12.2
Poisson's Ratio 0.38 to 0.43 0.38 to 0.42
Thermal
Normal Service Temperature (°C) 0 to 60 -40 to 60
Thermal Expansion (mm/m.°C) 0.055 to 0.095 0.070 to 0.100
Specific Heat (J/kg.K) 1000 to 1100 1500 to 1510
Thermal Conductivity (W/m.K) 0.24 to 0.26 0.17 to 0.24
Electrical
Dielectric Constant 3.1 to 3.2 2.8 to 3.3
Resistivity (1013 ohm.m) 3.16 to 10 6.31 to 15.8
Comparazione fra le proprietà di PVCu, ABS.
Proprietà PVCu-Rigido ABS Resistenza Urto
Generali
Composizione (CH2-CH-CI)n (CH2-CH-CH2—CH-CN-C6H4)n
Densità (Mg/m³) 1.35 to 1.55 1.03 to 1.07
Potere calorifico (Mj/kg) 85 to 106 85 to 120
Indice di riciclo 0.15 to 0.25 0.45 to 0.55
Meccaniche
Modulo di elasticità (GPa) 2.2 to 3.5 2.1 to 2.8
Limite elastico (MPa) 35 to 52 40 to 45
Resistenza a trazione (MPa) 30 to 70 45 to 48
Resistenza a compressione (MPa) 55 to 60 55 to 60
Duttilità 0.1 to 3 0.06 to 0.07
Limite di resistenza (MPa) 27 to 31.2 24 to 27
Resistenza all’urto (MPa.m½) 1 to 2 2.3 to 2.6
Durezza Vickers 10.6 to 15.6 5.6 to 12.2
Coefficiente di Poisson 0.38 to 0.43 0.38 to 0.42
Termiche
Temperatura di esercizio (°C) 0 to 60 -40 to 60
Dilatazione Termica (mm/m.°C) 0.055 to 0.095 0.070 to 0.100
Calore specifico (J/kg.K) 1000 to 1100 1500 to 1510
Conducibilità termica (W/m.K) 0.24 to 0.26 0.17 to 0.24
Elettriche
Costante dielettrica 3.1 to 3.2 2.8 to 3.3
Resistività (1013 ohm.m) 3.16 to 10 6.31 to 15.8
Material selection / Scegliere il materiale
110
Temperature and pressure relationship for pipes, PVCu imperial / Relazione fra Temperatura e pressione per i sistemi di tubatura British Standard in PVCu
Class C Class D Class E
Temperature (°C) bar psi bar psi bar psi
0 9.0 130 12.0 174 15.0 217
20 9.0 130 12.0 174 15.0 217
30 8.1 117 10.8 156 13.5 195
35 7.2 104 9.6 139 12.0 174
40 6.3 91 8.4 121 10.5 152
45 5.4 78 7.2 104 9.0 130
50 4.0 58 5.4 78 6.7 97
55 2.7 39 3.6 52 4.5 65
60 1.3 18 1.8 26 2.2 31
Temperature and pressure relationship for pipes, ABS imperial / Relazione fra Temperatura e pressione per i sistemi di tubatura British Standard in ABS
Class C Class D Class E
Temperature (°C) bar psi bar psi bar psi
-40 9.0 130 12.0 174 15.0 217
-20 9.0 130 12.0 174 15.0 217
0 9.0 130 12.0 174 15.0 217
20 9.0 130 12.0 174 15.0 217
30 8.1 117 11.3 163 13.5 195
40 6.3 91 8.5 123 10.5 152
50 4.5 65 6.3 91 7.5 108
60 2.7 39 3.8 55 4.5 65
Temperature and pressure relationship for pipes, PVCu metricRelazione fra Temperatura e pressione per i sistemi di tubatura Metrici in PVCu
Pipe pressure rating (bar)
Temperature (°C) PN10 PN16
0 10.0 16.0
20 10.0 16.0
30 8.0 12.8
35 7.1 11.8
40 6.4 10.2
45 5.1 8.2
50 4.4 7.0
55 3.3 5.2
60 2.6 4.1
Temperature and pressure relationship for pipes, PP-H metric (PN10)Relazione fra Temperatura e pressione per i sistemi di tubatura Metrici in PPH (PN10)
Pipe pressure rating (bar)
Temperature (°C) 50 Years 25 Years 10 Years 1 Year
20 10.0 10.6 11.0 12.3
40 6.2 6.6 6.9 8.0
60 3.8 4.1 4.3 5.2
80 – 1.6 2.0 3.5
95 – – 0.9 2.3
110 – – – 1.6
111
Selection of pipeline systems / La scelta del sistema di tubazione
Pipeline system selection
Pipeline system selection is usually based on a number
of parameters: -
• The effect of working conditions such as pressure, temperature
and the fluid carried.
• Flow rate of the fluid usually governs the pipe size.
La scelta del sistema di tubazione
La scelta del sistema di tubazioni è solitamente basata su alcuni
parametri:
• L’effetto sulle condizioni di esercizio a ogni pressione,
temperatura e il tipo di fluido trasportato
• La portata del fluido di solito determina il diametro del tubo.
PVCu (imperial sizes) pressure ratings– fittings, valves and pipesPVCU (British Standard) valore di pressione di raccordi, valvole e tubi
ProductProdotto
Size–inchesMisura in pollici
Pressure rating at 20°CPressione di esercizio a 20°C
psi bar
Fittings / Raccordi
Solvent cementAd incollaggio
½–6 217 15
8,10 and 12 130 9
Threaded / Filettati 3/8–4 145 10
Union / Bocchettoni½–2½ 174 12
3–4 145 10
Flange Blanks / Flange cieche
1–2 232 16
2½–4 145 10
5–6 87 6
Valves / Valvole
Ball / Sfera3/8–2 232 16
2½–4 145 10
3 Way ball Sfere a 3 vie ¾–2 145 10
Diaphragm / Membrana ½–2 145 10
Butterfly / Farfalla 3–5 145 10
6 87 6
Knife gate / A Coltello 1½–4 36 2.5
Check / Di non ritorno3/8–2 232 16
2½–3 145 10
Wafer check / Clapet2–6 145 10
8 87 6
Pipes / Tubi
Class E ½–6 217 15
Class D 1¼–6 174 12
Class C 2–12 130 9
Class TThreading and machining only
3/8– 2 174 12
PVCu (metric sizes) pressure ratings– fittings, valves and pipesPVCU (Metrici) valore di pressione di raccordi, valvole e tubi
ProductProdotto
Size–inchesMisura in pollici
Pressure rating at 20°CPressione di esercizio a 20°C
psi bar
Fittings / Raccordi
Solvent cementAd incollaggio
16–160 16 232
200–315 10 145
Metric solvent x BSP adaptorAdattatori Metrico/BS
16 x ³/8" - 110–4" 10 145
Valves / Valvole
Ball / Sfera16–63 16 232
75–110 10 145
Diaphragm / Membrana 20–63 10 145
Butterfly / Farfalla 90–140 10 145
160 6 87
Check / Non ritorno16–63 16 232
75–90 10 145
Pipes / Tubi
PN rated Pressione Nominale 16–315 10 and 16 145 and 232
PP-H (metric sizes) pressure ratings– fittings, valves and pipesPPH (Metrici) valore di pressione di raccordi, valvole e tubi
ProductProdotto
Size–inchesMisura in pollici
Pressure rating at 20°CPressione di esercizio a 20°C
psi bar
Fittings / Raccordi
Socket fusionSaldatura a bicchiere 16–110 10 145
Valves / Valvole
Ball union end/ socket fusionSfera incollaggio/saldatura a bicchiere
20–63 (½"- 2") 10 145
Ball union end / threaded BSPSfera incollaggio/terminale filettato (½"–2") 10 145
Butterfly / Farfalla
90–140(3"–5") 10 145
160–225(6"–8") 6 87
Check / Di non ritorno 20–63(½"–2") 10 145
Pipes
PN ratedPressione Nominale 16–110 10 145
112
ProductProdotto
Size–inchesMisura in pollici
Pressure rating at 20°CPressione di esercizio a 20°C
psi bar
Fittings / Raccordi
Solvent cementAd incollaggio
½–4 217 15
5–6 174 12
8 145 10
Threaded BSPFilettati 3/8–3 145 10
Union / Bocchettoni½–2½ 174 12
3–4 145 10
Flange Blanks / Flange Cieche
1–2 232 16
2½–4 145 10
5–6 87 6
ABS (imperial sizes) pressure ratings– fittings, valves and pipes / ABS (British Satandard) valore di pressione di raccordi, valvole e tubi
ProductProdotto
Size–inchesMisura in pollici
Pressure rating at 20°CPressione di esercizio a 20°C
psi bar
Valves / Valvole
Ball / Sfera
3/8–2(16–63mm)
232 16
2½–4(75–110mm) 145 10
Check / Di non nritorno
3/8–2(16–63mm)
232 16
2½–3(75–90mm) 145 10
Pipes / Tubi
Class E 3/8–4 217 15
Class D 6 174 12
Class C 1–8 130 9
Class TThreading and machining only
3/8–2 174 12
Valve selectionValve selection is based upon a number of key parameters: -
• The primary valve body material is selected along with the
material best suited for the pipe system.
• Thereafter valve selection will depend on the properties of the
conveyed medium and the valve characteristics themselves, as
shown in table.
• The compatibility of the seal material to the conveyed medium
within the known operating parameters must be confirmed,
which can be determined by reference to the valve seal
behaviour in table.
• Additionally, valves have another important characteristic
known as torque rating which is very important in actuated
applications.
Scelta delle valvoleLa scelta della valvola è basata su alcuni parametri chiave:
• La scelta del materiale del corpo della valvola deve essere fatta
in base al materiale più usato nel sistema di tubazione
• Successivamente la scelta sarà determinata dalle proprietà del
fluido trasportato come mostrato nella tabella che segue.
• La compatibilità del materiale delle guarnizioni con le condizioni
del fluido trasportato deve essere confermata, essa può essere
determinata dai dati mostrati in tabella
• In aggiunta le valvole devo no avere un’altra importante valore
conosciuto come forza di torsione che è molto importante nelle
applicazioni con attuatori.
Valve selection / Scelta delle valvole
Valve featuresCaratteristichedelle valvole
Ball valveValvole a sfera
Butterfly valveValvole a farfalla
Diaphragm valveValvole a membrana
Standard sealGuarnizioni standard EPDM, FPM EPDM, FPM EPDM
Flow / Portata Full Restricted Restricted
Flow adjustmentRegolazione della portata
Limited, not positive
Good, positive
Good, positive
Frictional pressure lossPerdite di carico Low Medium High
Behaviour water hammerComportamento ai colpi di ariete
Fair Limited Limited
Valve seal behaviour / Comportamento delle guarnizioni delle valvole
Seal featuresCaratteristichedelle guarnizioni
Ball valveValvole a sfera
Butterfly valveValvole a farfalla
Diaphragm valveValvole a membrana
Liquid, particle freeLiquido, non inquinato Good Good Good
Liquid, particulate or crystal formingLiquido con residui o formazioni cristalline
Limited, needs regular cleaning
Good, but needs occasional cleaning Good
Liquid, viscousLiquidi viscosi Good Limited Limited
GasesGas Good Good Limited
For more information regarding the selection of valves for actuation and the relevant torque figures, please ask for a copy of the full Effast Technical Catalogue.Per maggiori informazioni riguardo la scelta delle valvole con attuatori e le relative caratteristiche di torsione, consultare il catalogo Effast dedicato.
113
Storage, handling and installation / Stoccaggio, movimentazione e installazione
Introduction
One of the key parts of a successful installation comes from the
way that plastic pipes and components are stored and handled.
This chapter deals with the installation of plastic pipeline systems
and describes the methods for preserving structural integrity and
compensating for thermal expansion.
Storage and handling
Pipe is often stored directly on the ground or supported in racks or
pallets and the following conditions should be observed: -
• Ensure that the ground surface is level and cleared of debris to
prevent the pipes from becoming bent, scored and damaged.
• Pipes should never be stacked more than 6 layers high and in
hot climates this should be restricted to 4 layers. Large bore
pipes should not be stacked greater than 1 metre high, thus
avoiding ovality due to heat and pressure.
• Pipes of different diameters and wall thickness should be
stacked separately. If this is not practical the larger diameter and
thicker walled pipes should be stored at the bottom of the stack.
• Pipe racks should be constructed to provide full support to each
pipe layer. Side supports should be at least 100mm wide and be
placed at regular intervals of 1.2 metres along the pipe length.
• Narrow straps to support the pipe stack should be avoided.
• Pipes can be stored in palletised stacks as long as the pallets and
not the pipes support the stack weight and pallets should be
stacked no more than 3 pallets high for short periods only.
• Pipes and fittings stored for an extended period of time should
be protected from direct sunlight to avoid UV degradation.
Fittings should be stored using a method that allows air
circulation such as porous hessian sacks, boxes or on shelves.
The whole purpose of correct handling is to avoid damage to
pipes and should encompass loading, transit and unloading of the
pipes. The following guidelines should be addressed when
handling pipes: -
• Pipes should be loaded and unloaded manually without
dragging them over the ground, as this causes damage.
However if handling pallets of pipe by forklift ensure that
the forks do not cause damage.
• Flatbed vehicles should be used to distribute pipe loads and the
largest diameter pipe should be loaded first with the smaller
pipe loaded on top or nested inside to avoid damage. Do not
drop pipes off the vehicle when off loading but handle and
stack them correctly.
Installation of plastic pipes
Thermoplastics expand and contract to a far greater extent than
metals and the following sketch provides a comparison between
some metals and plastics: -
Introduzione
Una delle componenti più importanti per una perfetta installazione è
senza dubbio il modo in cui i vari componenti sono stoccati e
movimentati.
Questo capitolo tratta dell’installazione dei sistemi di tubazioni in
materiale plastico e descrive i metodi per preservare l’integrità
strutturale compensando la dilatazione termica.
Stoccaggio e movimentazione
Il tubo è spesso conservato a terra o raccolto in fasci o pallets e
deve osservare le seguenti condizioni:
• Assicurarsi che la superficie del terreno sia piana e pulita da detriti
per evitare che il tubo possa piegarsi, segnarsi o danneggiarsi.
• Il tubo non dovrebbe mai essere impilato con più di 6 strati, 4 se il
clima è caldo. I grandi diametri dovrebbero essere impilati con cura
per evitare eventuali ovalizzazioni dovute al calore o alla pressione.
• Tubi di differenti diametri e diversi spessori dovrebbero essere
impilati separatamente. Se questo non fosse possibile i grandi diametri
e i tubi con maggior spessore dovrebbero essere posti in basso.
• I supporti per lo stoccaggio dei tubi dovrebbero essere costruiti
in modo da sorreggere ogni livello di tubo. I supporti laterali
dovrebbero essere almeno di 1 mt di larghezza e posti a intervalli
regolari di 1.2 mt nel senso della lunghezza del tubo.
• Cinghie strette per sorreggere le pile dovrebbero essere evitate.
• I tubi possono essere stoccati in pile pallettizzate, ma in modo
che i tubi non debbano sopportare il peso dei pallets, al massimo
possono essere impilati 3 pallets per brevi periodi.
• I tubi e i raccordi che sono conservati per un lungo periodo devono
essere protetti dalla luce diretta del sole per evitare che i raggi UV li
possano danneggiare. I raccordi dovrebbero essere conservati in
modo che ci sia circolazione d’aria, in scaffali, sacchi di iuta o scatole.
La ragione della corretta movimentazione è evitare che tubi e
raccordi possano essere danneggiati durante il carico, il trasporto
e lo scarico. Le seguenti linee guida dovrebbero indirizzare
l’utilizzatore verso la corretta movimentazione:
• I tubi dovrebbero essere caricati e scaricati manualmente, per
evitare danni non dovrebbero essere trascinati sul terreno, nel
caso lo scarico avvenga tramite muletti assicurarsi che le forche
non possano danneggiare i tubi.
• I tubi dovrebbero essere caricati su veicoli con pianali idonei con
quelli di maggior diametro caricati per primi. Maneggiare i tubi
con cura evitando di farli cadere dal veicolo quando vengono
scaricati per non danneggiarli.
Installazione di tubazioni plasticheI materiali termoplastici subiscono dilatazioni e contrazioni in
maniera molto maggiore rispetto ai metalli e il seguente grafico
compara alcuni materiali plastici e metallici.
114
There are two factors to consider when calculating expansion or
contraction in pipes: -
• Environmental temperature (external temperature) at which
the pipe will stabilise prior to installation.
• Fluid temperature (internal temperature) which is the
operational temperature of the pipeline system.
The change in length due to thermal expansion or contraction in a
pipeline system is determined by the following formula: -
Where ∆L Expansion (∆Le) or contraction (∆Lc) in mm
∆T Difference in temperature between the installation and the
operating temperatures in °C (=T operate–T install)
L Length of pipe when installed δCoefficient of expansion
Ci sono due fattori da considerare quando si calcolano la
dilatazione e la contrazione dei tubi:
• La temperatura ambientale (temperatura esterna) alla quale il
tubo sarà esposto prima della installazione
• La temperatura del fluido (temperatura interna) pari alla
temperatura di esercizio del linea di tubazione
La differenza di lunghezza determinata dalla dilatazione o
contrazione termica in una tubazione è determinata dalla
seguente formula:
Dove:
∆L = Dilatazione (∆Le) o contrazione (∆Lc) in mm
∆T = Differenza di Temperatura fra l’installazione e la temperatura di esercizio in °C.
( Tesercizio – Tinstallazione)
L = Lunghezza del tubo all’installazione
∂ = coefficiente di dilatazione termica
Comparison of thermal expansion of plastics and metals
Confronto di dilatazione termica della plastica e metalli
Acciaio dolce
Acciaio inox
Rame
PVCu
ABS
115
Storage, handling and installation / Stoccaggio, movimentazione e installazione
Solution / Soluzione
Step / FasiOperating temperature (oC) / Temperatura di esercizio
30 8
Calculate temperature difference / Calcolare la differenza di temperatura∆T (=T operate–T install)
= 30–10
= +20°C
= 8–10
= -2°C*
Calculate change in length due to expansion and contractionCalcolare la differenza di lunghezza dovuta alla dilatazione e alla contrazione
∆L = ∆T x L x δ(δ = 0.078 for PVCu)
= 20 x 30 x 0.078
= 46.8mm
= -2 x 30 x 0.078
= -4.68mm*
Select length of flexible arm or compensatorPrevedere la lunghezza della parte libera o della compensazione
Take the greater value (change in length) regardless of whether it is due to expansion or contraction that can accommodate the maximum movement.In this case ∆L = 46.8mm
Prendere il valore maggiore (differenza in lunghezza) indipendentemente dal fatto che sia dovuta alla dilatazione o alla contrazione che può provocare il massimo movimento.In questo caso ∆L = 46.8 mm
For example PVCu will expand 0.078mm per metre for every 1°C raised in mid-wall temperature above the installation temperature.
Per esempio PVCu si dilaterà 0,078 mm per metro per ogni grado centigrado di incremento della temperatura oltre la temperatura di installazione.
Please note that the temperature difference is the difference between the installation temperature and the working temperature, in degrees Celsius (°C).
la differenza di temperatura è la differenza fra la temperatura di installazione e la temperatura di esercizio in gradi Celsius (°C)
Coefficient of linear expansion for thermoplastics (δ) / Coefficiente di dilatazione lineare materiali termoplastici
Thermoplastic materialMateriali termoplastici
Coefficient δ (10-5m/m°C)Coefficiente
Length/temperature equivalent (mm/m°C)Lunghezza/temperatura equivalente
PVCu 7.8 0.078
ABS 10.1 0.101
PP 15.0 0.150
PE 20.0 0.200
* Please note a (-) minus value represents the difference in temperature (it is not a subzero) and hence it causes a contraction of the length of the pipe.
Notare che il segno meno rappresenta la differenza di temperatura (non è sottozero) e quindi causa una diminuzione della lunghezza del tubo.
Worked exampleFind the expansion and contraction on a 4” diameter PVCu pipe system installed at 10°C, where the maximum and minimum operating temperatures are 30°C and 8°C respectively and the overall length of the installation is 30m.
EsempioTrovare la dilatazione e la contrazione di una tubazione in PVCu del diametro di 4” installato a 10°C, che lavora alle temperature di esercizio minima di 8°C e massima di 30°C della lunghezza di 30 mt.
Calculated expansion for 1 metre length pipe / Calcolo della dilatazione per ogni metro di tubo
Temperature difference (°C)Differenza della temperatura (°C)
Expansion (mm) / Dilatazione (mm) CommentNotePVCu ABS
1 0.078 0.101
2 0.156 0.202
3 0.234 0.303
For the temperature range not on the chart add the factorsPer le temperature non comprese in questa tabella procedere come segue:4 0.312 0.404
5 0.390 0.505
6 0.468 0.606
7 0.546 0.707 i.e.For PVCu @ 37°Ces. per PVCu a 37°C
8 0.624 0.808
9 0.702 0.909 20°C = 1.560mm
10 0.780 1.010 +17°C = 1.326mm
11 0.858 1.111
12 0.936 1.212 37°C = 2.886mm
13 1.014 1.313
14 1.092 1.414
15 1.170 1.515
16 1.248 1.616
17 1.326 1.717
18 1.404 1.818
19 1.482 1.919
20 1.560 2.020
116
• Full support of the pipeline can be achieved by running along
suitable channel and restraining it from lateral movement.
• Totale supporto alla tubazione può essere ottenuto facendola
scorrere in una canalina e limitandone i movimenti laterali
• Pipelines which are suspended have to be supported by brackets
spaced at predetermined intervals (see the following tables).
• Le tubazioni che devono essere sospese possono essere sostenute
da staffe posizionate a intervalli regolari (vedi la seguente tabella)
• Limiting Rings PVCu and ABS: These can be made by cutting a
small length (dissecting 1/3rd of the circumference) of class ‘C’
or 10 bar pipe of the same outside diameter of the carrier pipe.
The remaining segment can be sprung open and then solvent
welded into place on the carrier pipe.
• Fascette in PVCu e ABS: possono essere ottenute con un tubo tagliato di sezione pari a 1/3 della circonferenza di Classe C o
PN10 dello stesso diametro esterno del tubo da fissare. La
sezione ad anello aperta così ottenuta può essere incollata sul
tubo da sostenere.
Supports, brackets and limiting rings Staffe, portatubi e fascette di contenimento
Plastic pipe systems support and bracketing
Plastic pipe systems require regular support which can vary
according to pipe material, size and wall dimension of the pipe,
the weight (density) of the liquid carried and the temperature of
the pipe wall. There are three types of mechanism which support
or restrain pipe movement: Restrained within a channel;
supported with clips or brackets at predetermined intervals and
limiting rings to restrict axial movement.
Supporti e portatubi per tubazioni
Le tubazioni plastiche richiedono regolari supporti che possono
variare con il tipo di materiale del tubo, la dimensione e lo
spessore, il peso (la densità) del liquido trasportato e la
temperatura delle pareti del tubo. Ci sono tre modi che possono
essere utilizzati per fissare i tubi:
• Contenere in una canalina
• Fissare con portatubi o staffe a determinati intervalli
• Circondare con fascette per limitare il movimento assiale
117
Staffe
Le staffe per i tubi devono essere di diametro leggermente più
grande del diametro esterno del tubo che devono sostenere per
permettere movimenti lineari di dilatazione e contrazione.
Dovrebbero essere lisce per evitare che creino danneggiamento
alla superficie del tubo.
Le tabelle sono basate sul tubi di classe E (15 bar) per le misure
British standard e PN 16 per le misure metriche.
Per tubi con PN minore lo spazio deve essere minore, calcolato
come segue:
• Classe D (12 bar) o PN12 -> x 0,75
• Classe C (9 bar) o PN10 -> x 0,62
Brackets
Pipe brackets need to be made with the inside diameter of the
bracket marginally larger than the pipe outer diameter. This allows
free lineal movement of the pipe and avoids inhibiting expansion
or contraction. They should also be smooth, to avoid damage to
the outer surface of the pipe.
Tables are based on class E pipe (15 bar) or the PN16 metric rating.
For pipes of a lower rating the spacing will be closer, derate as
follows: -
• Class D (12 bar) and PN12 rated pipe x 0.75
• Class C (9 bar) and PN10 rated pipe x 0.62
Loose brackets–axial movement is required without constraint / Staffe libere – movimenti assiali liberi
A loose bracket allows axial movement.
Una staffa libera permette movimenti assiali
A sliding bracket allows movement along a flat
supporting surface.
Una staffa scorrevole permette movimenti lungo una superficie di appoggio piana
Hanging bracket allows radial and axial
movement.
Una staffa agganciata permette movimento radiali ed assiali
Fixed brackets–axial movement constrained or controlled / Staffe fisse movimenti assiali controllati o impediti
A bracket on either side prevents axial
movement.
Una staffa bloccata da entrambi i lati previene i movimenti assiali
A bracket between two pipe sockets or
limiting rings prevents axial movement.
Una staffa fra due manicotti o collari previene movimenti assiali
A bracket to control pipe movement in
one direction.
Una staffa per controllare il movimento del tubo in una direzione
Storage, handling and installation / Stoccaggio, movimentazione e installazione
118
Bracket spacing for gases and liquids PVCu PN 16 metric pipe and class E (15 bar) imperial pipe / Distanza fra staffe per tubo in PVCu PN16 o classe E (15bar) per trasporto di liquidi e gas
Pipe size / Diametro del tubo Bracket spacing in metres / Distanza delle staffe in metri
mm inch 20°C 30°C 40°C 50°C 60°C
16 3/8 0.80 0.70 0.50 * *
20 ½ 0.90 0.80 0.60 * *
25 ¾ 1.00 0.90 0.70 0.55 0.40
32 1 1.10 0.95 0.75 0.60 0.45
40 1¼ 1.20 1.10 0.90 0.70 0.55
50 1½ 1.30 1.20 1.00 0.80 0.60
63 2 1.40 1.30 1.10 0.90 0.65
75 2½ 1.50 1.40 1.20 1.00 0.70
90 3 1.60 1.50 1.30 1.20 0.85
110 4 1.90 1.80 1.60 1.30 1.10
125 - 2.10 2.00 1.85 1.60 1.25
140 5 2.20 2.10 1.90 1.65 1.35
160 6 2.30 2.20 2.00 1.75 1.50
225 8 2.60 2.45 2.30 2.00 1.75
250 – 2.80 2.70 2.55 2.20 1.95
280 10 3.20 3.00 2.85 2.50 2.15
315 12 3.60 3.40 3.20 2.80 2.45
Bracket spacing for gases and liquids–ABS class E pipe (15 bar) / Distanza fra staffe per tubo in ABS classe E (15bar) per trasporto di liquidi e gas
Pipe size / Diametro del tubo Bracket spacing in metres / Distanza delle staffe in metri
inch 20°C 30°C 40°C 50°C 60°C
3/8 0.80 0.75 0.65 0.60 0.50
½ 0.90 0.80 0.75 0.65 0.55
¾ 1.00 0.95 0.85 0.75 0.70
1 1.10 1.00 0.95 0.80 0.75
1¼ 1.20 1.10 1.00 0.90 0.80
1½ 1.25 1.20 1.10 0.95 0.85
2 1.40 1.30 1.20 1.00 0.90
2½ 1.50 1.35 1.25 1.15 1.00
3 1.60 1.45 1.35 1.20 1.05
4 1.80 1.65 1.55 1.35 1.20
5 2.00 1.80 1.70 1.50 1.30
6 2.10 1.90 1.80 1.60 1.40
8 2.30 2.10 1.90 1.70 1.50
* Implies full support requirement. / * Richiesto supporto continuo
Bracket spacing for gases and liquids–polypropylene metric 10 bar rated pipe / Distanza fra staffe per tubo in PP 10bar per trasporto di liquidi e gas
Pipe size / Diametro del tubo Bracket spacing in metres / Distanza delle staffe in metri
mm 20°C 40°C 60°C 80°C 100°C
16 0.74 0.68 0.63 0.54 0.39
20 0.79 0.69 0.64 0.59 0.44
25 0.84 0.82 0.74 0.69 0.49
32 0.99 0.94 0.84 0.74 0.54
40 1.05 1.03 0.94 0.84 0.59
50 1.20 1.14 1.04 0.89 0.69
63 1.38 1.29 1.18 1.04 0.79
75 1.53 1.43 1.28 1.13 0.84
90 1.63 1.53 1.43 1.23 0.93
110 1.84 1.73 1.58 1.38 1.04
119
Storage, handling and installation / Stoccaggio, movimentazione e installazione
The Z dimensionThe following steps should be undertaken in preparation for a pipeline installation: -
• Prepare a basic sketch of the pipeline system, including fittings.
• Enter the dimensions of the pipes and fittings and the centre to centre measurement of each section either by measuring on site or from the engineer’s drawings.
• Calculate the cut length of each piece of pipe between fittings to enable correct overall assembled length of section as follows:
L = M–Z1–Z2
Where L Cut length of pipe
M Centre to centre length between fittings
Z1–Z2 Linear Dimensions of fittings
La quota “Z”Per preparare una tubazione le seguenti azioni dovrebbero essere eseguite:
• Preparare un disegno di massima della tubazione, inclusi i raccordi
• Quotare le dimensioni del tubo e dei raccordi e misurare ogni sezione da centro a centro o mediante disegni esecutivi o sul sito
• Calcolare la lunghezza a cui tagliare ogni sezione di tubo fra i raccordi per permettere un corretto assemblaggio come segue:
L = M–Z1–Z2
Dove: L = lunghezza del tubo tagliato
M = Distanza fra i raccordi misurata dal centro
Z1-Z2 = Quote caratteristiche dei raccordi
As an example, the installation notes for a PVCu pipe would appear as follows: -M centre to centre = 1200mmLess Z1 flange = 4mmLess Z2 bend = 80mm - 84mmL cut length pipe = 1116mm
Il calcolo da eseguire per l’installatore dovrebbe seguire l’esempio: M = da centro a centro = 1200mmMeno Z1 flangia = 4mmMeno Z2 curva = 80mm - 84mmL = Lunghezza del tubo da tagliare = 1116mm
Z dimension / Quota “Z”
Jointing methods for Plastic pipe systemsThis deals with the four key methods of joining plastic pipes and the selection of a jointing method is dependent on the pipe material and its characteristics.Table below is a guide to the selection of the type of joint which can be used for the particular pipe material.
Metodi di giunzione per sistemi di tubatura in materiale plasticoCi sono quattro metodi principali per la giunzione di tubature in materiale plastico, la scelta dipende dal tipo di materiale del tubo e dalle sue caratteristiche.Lo schema sotto è una guida per la scelta del tipo di giunzione che può essere usata per un particolare tipo di tubo.
4 = Suitable 8 = Not suitable 4 = Indicato 8 = Non indicato
Thermoplastic jointing methods / Metodi di giunzione termoplastici
Method / Metodo PVCu Thermoplastic material ABS / ABS PP and PE / PP e PE
Solvent cement / Incollaggio 4 4 8
Mechanical / Meccanica 4 4 4
Fusion / Fusione 8 8 4
Compression / Compressione 4 4 4
Solvent cement is formulated to chemically solvate the surfaces of pipes and fittings, so that when they are pushed together the softened surfaces intermix and cure into a hard, strong and leak-free joint.Materials welded this way must be alike, i.e. PVCu to PVCu and ABS to ABS. Not PVCu to ABS or vice versa.
La colla è formulata chimicamente per saldare le superfici di tubo e raccordi, così quando vengono messi a contatto la colla indurisce fino a far diventare la giunzione solida ed esente da perdite.
Fusion jointing involves heating the two components to be joined, so that the fusion/melt temperature on each surface is reached simultaneously. The two melted surfaces are then brought together at a pressure designed to produce a homogenous joint when cooled. The resulting joint will have an equivalent strength and pressure rating as the original pipe. Contact Polypipe for further details.
La saldatura a fusione scalda i due componenti che devono essere uniti, in modo che la temperatura di fusione venga raggiunta contemporaneamente. Le due superfici fuse sono quindi unite con una pressione indicata per produrre una giunzione omogenea durante il successivo raffreddamento. La giunzione risultante avrà la stessa durezza e resistenza a pressione del materiale del tubo. Contattate Polypipe per maggiori dettagli
Compression jointing consists of compressing a rubber ring between the inner wall of the fitting and the outer wall of the pipe to be jointed. Compression joints can be used to connect different types of pipe, both plastic and metal. As long as the correct fitting is selected, taking into account the outside diameters of the different types of pipe work, then a satisfactory joint can be made. Note: Compression joints are designed primarily for use on water pipelines.Contact Polypipe for further details.
La giunzione a compressione consiste nella compressione di un anello di gomma fra la parete interna del raccordo a la parete esterna del tubo che devono essere uniti. Questo tipo di giunzione può essere usato per differenti tipi di tubo, sia plastici che metallici. Affinchè il corretto modo di assemblaggio venga eseguito tenere conto dei differenti diametri esterni dei tubi che vengono giuntati. Nota: la giunzione a compressione è indicata principalmente per tubazioni ad adduzione di acqua. Contattate Polypipe per maggiori dettagli.
This method uses threads and flanges to connect the different parts of pipeline systems. Questo metodo è usato per flange e raccordi filettati per unire insieme le diverse parti del sistema.
120
PVCu and ABS solvent jointing procedure / Procedura per incollaggio di PVC e ABS
Procedure / Procedura Equipment / Attrezzatura
Important information:
Informazione importante:
• Always use Personal Protective Equipment–gloves and eye protection• Usare sempre i dispositivi di protezione individuale quali guanti e occhiali protettivi
• Always carry out work in a well ventilated area• Eseguire il lavoro sempre in un’aria ventilata
• Always refer to Material Safety Data Sheets• Fare riferimento sempre alle schede di sicurezza dei materiali
• Dispose of waste responsibly• Smaltire i rifiuti responsabilmente
• Failure to follow the jointing procedure may invalidate any warranties given• Non seguire la procedura di incollaggio può pregiudicare la garanzia del prodotto
1. Cut the pipe at right angles to its axis and to the required length. Deburr the cut end of the pipe with a sharp knife or scraper.
1. Tagliare il tubo ad angolo retto rispetto al proprio asse alla lunghezza richiesta. Sbavare le estremità del tubo con un coltello o attrezzo adatto.
• Pipe cutterTagliatubi
• SawSeghetto
• Scraper or knifeColtello o sbavatore
2. Chamfer the leading edge of the pipe at approximately 15° to 30°. This will prevent the solvent cement being wiped from both the pipe and fitting when mated together and will also help to build up a ring of solvent around the chamfer, thus ensuring a proper seal.
2. Smussare l’estremità del tubo con un angolo fra i 15° e i 30°. Questo eviterà che la colla venga asportata dalle superfici di tubo e raccordo quando vengono accoppiati creando uno strato di colla sullo smusso che renderà l’accoppiamento a tenuta stagna.
• Chamfering toolUtensile smussature
• Fine disc angle grinder, file or abrasive paper 80–100 grit
Disco abrasivo angolare o carta abrasiva 80/100
Pipe size / Diametro del tubo
3/8” (16mm)
½”–1½” (20–50mm)
2”–8” (63–225mm)
Chamfer Size (mm) / smusso (mm)
2
3–4
5–6
3. Mark the pipe back from the chamfered end to a length equal to the socket depth plus 5mm. This mark will act as a visual indicator to show that the pipe is fully inserted into the socket.
3. Marcare il terminale del tubo smussato ad una lunghezza uguale all’imbutitura del raccordo più 5mm. Questo segno sarà da guida per controllare che il raccordo sia stato inserito fino a completo accoppiamento.
• Marker penPennarello
4. Roughen the pipe surface (up to the indicator mark) and the inside of the socket with abrasive cloth or paper. Do not roughen the pipe and fitting to the extent that the clearance between them is noticeably increased.
4.Carteggiare la superficie del tubo fino al segno e l’interno del manicotto del raccordo con carta abrasiva. Non carteggiare in eccesso perché la distanza fra tubo e raccordo potrebbe diventare eccessiva.
• Abrasive paper/cloth 80–100 gritCarta o disco abrasivo 80/100
5. Clean the inner surface of the socket and the surface of the pipe up to the mark using a lint free cloth or absorbent paper dampened with Effast solvent cleaner.
5. Pulire la superficie interna del manicotto del raccordo e la superficie del tubo fino al segno usando uno tessuto o carta assorbente imbevuta di Detergente Effast
• Lint free cloth or absorbent paperCarta assorbente o tessuto
• Effast solvent cleanerDetergente Effast
121
Methods of jointing / Metodi di giunzione
PVCu and ABS solvent jointing procedure–continued / Procedura per incollaggio di PVC e ABS (continua)
Procedure / Procedura Equipment / Attrezzatura
Select the correct solvent cement, PVCu to PVCu, ABS to ABS. (failure to use the recommended solvent cement may invalidate any warranties given)Apply the cement straight from the tin an d ensure all relevant surfaces are covered.
Selezionare la corretta colla per la giunzione fra PVCu-PVCu o ABS-ABS (usare colle non raccomandate può invalidare la garanzia del prodotto). Applicare un sottile strato di colla e assicurarsi che tutte le superfici siano coperte.
Read the instructions on the tin.Avoid using excessive amounts of solvent cement.Leggere le istruzioni sulla confezione della colla. Evitare di usare una quantità eccessiva di colla.
• Effast PVCu cementEffast PVCu Colla
• Effast ABS cementEffast ABS Colla
• Brush (half the diameter of the socket)Spazzola (metà del diametro del manicotti)
Push fittings/pipe together without twisting and ensure that they are aligned and fully engaged (the indicator mark should be in line with the edge ofthe socket) then hold the assembly for a short time as specified.Accoppiare il tubo e il raccordo senza torsioni e assicurarsi che siano allineati, per verificare che il tubo abbia raggiunto il fondo del manicotto controllare il segno fatto in precedenza. Attendere il tempo indicato per il completo assemblaggio.
Pipe Size / Misura
3/8”–2” (16mm–63mm)2½”–4” (75–119mm)5”–8” (140–225mm)10”–12” (250–315mm)
Holding Time / Tempo di attesa(minutes / minuti)
½¾12
Recommended joints per litre of Effast cement / Incollaggi raccomandati per litro di colla Effast
Pipe size / Diametro del tubo Thermoplastic material / Materiale termoplastico
inch mm PVCu ABS
3/8–1 16–32 300 400
1¼–2 40–63 120 175
2½–3 75–90 50 70
4 110 30 45
5 140 20 30
6 160 15 25
8 200–225 8 15
10 250–280 3 4
12 315 3 4
Joints are normally made in temperatures between 5–25°C and in dry conditions, damp or wet conditions can adversely effect the solvent jointing procedure. The maximum time before the cement is too dry for jointing is approximately 3 minutes. In hot weather this time is reduced. The joint must be made whilst the cement is still wet.At temperatures below 5°C the curing time will be considerably increased.
Gli incollaggi sono normalmente fatti a temperature fra i 5 e i 25°C e in condizioni di asciutto, sporcizia o umidità possono avere effetti negativi sulla procedura di incollaggio. Il tempo minimo prima che la colla diventi troppo secca è 3 min, ma questo tempo si può ridurre se il clima è caldo. L’incollaggio deve essere fatto quando la colla è ancora umida.A Temperature sotto 5°C il tempo deve essere aumentato.
When the joint is made, an O-ring of cement is formed between the pipe chamfer and the internal socket wall. This ring helps to ensure seal integrity. A bead of cement will show around the external junction of the pipe and fitting, this should be wiped off leaving the outer part of the joint clean. Do not disturb for at least 10–15 minutes to ensure that the weld integrity is maintained. After this period, the assembly can be carefully handled, prepared for further jointing or left for the recommended curingtime which is:Up to 8” (225mm) ambient temperature constantly above 5°C After 8 hours The joint will have
cured enough to withstand the working pressure. After 24 hours The pipe system can be fully pressure tested.
Quando l’incollaggio è stato fatto un anello di colla si sarà formato fra lo smusso del tubo e la parete interna del manicotto del raccordo. Questo anello assicura l’integrità della tenuta. Un eccesso di colla all’esterno della giunzione fra tubo e raccordo dovrà essere asportata, lasciando la parte pulita. Non caricare per almeno 10-15 min in maniera da assicurare che l’integrità della giunzione si assicurata. Dopo questo periodo l’insieme può essere preparato per successive giunzioni o lasciato riposare per completare la polimerizzazione. Il tempo di riposo è:Fino a 8” (225 mm) con temperatura ambiente costantemente sopra i 5°C: Dopo 8 ore la giunzione sarà pronta per resistere alla pressione di esercizio Dopo 24 ore il sistema può essere testata alla massima pressione
The number of operators:For joints of up to 2½” (75mm) 1 person is required, from 3” (90mm) up to 6” (160mm) 2 persons are needed, for 8” (225mm) and above 3 people are required.Pipe work should be ventilated during the joining and curing processes. Never seal a pipe system which has been newly jointed as the trapped vapours can cause damage. Positive ventilation with a small air blower is recommended to purge systems with multiple joints.
Numero di operatori richiesti per le operazioni di incollaggio:Per giunzioni fino a 2”1/2” (75 mm) è richiesta una persona, da 3” (90mm) sono necessarie 2 persone, per 8” (225 mm) e superiori sono richieste 3 persone.Il luogo di lavoro deve essere ventilato durante le operazioni di incollaggio e il processo di polimerizzazione. Non sigillare mai una tubazione che è stata appena incollata, i vapori potrebbero causare danni all’impianto. Un impianto di ventilazione con soffio d’aria è raccomandato per depurare i sistemi con incollaggi multipli.
6.
6.
7.
7.
122
Important points
• Heavy equipment should be supported independently from the
pipeline. i.e. valves, strainers, etc.
• Pipe clips should be made to allow linear expansion of the
pipeline and if lined the lining should be of a material
compatible with the pipeline.
• Mastics, intumescent mastics, adhesive tapes and labels should
not be used (as many degrade plastics), unless manufacturers
provide documents of adhesive or mastic compatibility.
• Insulation must be considered very carefully, as a number of
foam rubber insulation products and their adhesives may not
be compatible with plastic pipes.
Adhesives should only be used to bond the foam edges
together and should never be used to bond the insulation to
the pipeline. Refer to manufacturers for compatibility data. For
example, compatible insulations are fibre wools (Rockwool),
polystyrene, etc.
• Trace heating tapes: Don’t use tapes covered with plasticized
PVC as this can react with thermoplastic pipes. Tapes with
sheaths made from woven wire, polyester or silicone rubber are
acceptable.
• Oils: A number of synthetic oils are not suitable for use with
plastic pipelines. Oils such as esters, organic phosphates and
polyalkylene glycols should be avoided.
• Health and safety: Solvent cement and cleaning fluid give off
vapours that are dangerous to health. During jointing the work
place must be well ventilated.
Solvent jointing, “Do Nots”
• Make joints in rain or wet conditions.
• Use dirty brushes or cleaning rags.
• Use the same brushes with different solvent cements.
• Dilute or thin solvent cements with cleaner.
• Leave solvent cement tins open as the contents will evaporate
and the cement performance will be reduced.
• Use near naked lights or smoke whilst jointing as solvents are
highly flammable.
• Make joints in a confined space as solvents emit hazardous vapours.
Mechanical jointing procedure–threaded fittings–plastic to plastic
An extensive range of threaded fittings are available, mostly
parallel threaded but some tapered. Thread compatibility is an
essential aspect of jointing. For jointing such parts follow
these steps: -
1. Select compatible thread i.e. Parallel to Parallel, never Parallel
to taper or vice versa.
È importante ricordare che
• Parti pesanti dovrebbero essere fissate in maniera indipendente
dalla linea di tubazione, per esempio; valvole, filtri, etc.
• I portatubi dovrebbero essere in grado di permettere la
dilatazione lineare della linea di tubazione e se è coibentata, la
coibentazione dovrebbe essere di materiale compatibile con la
linea di tubazione
• Mastici, nastri adesivi ed etichette adesive non dovrebbero
essere usati (potrebbero intaccare la plastica) se non
espressamente indicati come compatibili dal produttore.
• L’isolamento dovrebbe essere considerato con molta
attenzione, molte schiume isolanti potrebbero non essere
compatibili con il materiale plastico. Gli adesivi dovrebbero
essere usati solo a contatto con la schiuma isolante e non per
incollare l’isolante alla tubazione. Consultare il fabbricante per
la compatibilità degli isolanti. Isolanti compatibili sono per
esempio lana di roccia, polistirene, etc.
• Fasce riscaldanti: non usare fasce riscaldanti coperte con PVC
plastificato,potrebbero reagire a contatto con il tubo di
materiale termoplastico. Fasce con guaine di tessuto, poliestere,
o gomma siliconica sono accettabili.
• Oli: Alcuni oli sintetici non sono utilizzabili per le linee di tubo
in materiale plastico. Oli come esteri, organici, fosfati e glicoli
polivalenti dovrebbero essere evitati.
• Salute e sicurezza: La colla e il detergente sprigionano vapori
che possono essere dannosi per la salute. Durante l’incollaggio
l’ambiente deve essere ventilato.
Incollaggi – Cose da evitare
• Eseguire incollaggi sotto la pioggia o con presenza di umidità
• Usare pennelli o stracci sporchi
• Usare lo stesso pennello per colle differenti
• Diluire la colla con il detergente
• Lasciare la confezione della colla aperta, il solvente evaporerà e
l’effetto della colla sarà ridotto
• Usare la colla vicino a fonti di calore o in presenza di fiamme
libere, è altamente infiammabile
• Eseguire incollaggi in uno spazio chiuso, la colla può generare
vapori pericolosi.
Procedura per Accoppiamento Meccanico di raccordi filettati plastica-plasticaUn’ampia gamma di raccordi filettati è disponibile, la maggior
parte con filettatura cilindrica, ma alcuni con filettatura conica. La
compatibilità fra i filetti è un aspetto molto importante per
l’accoppiamento. Per accoppiare ogni parte, seguire i seguenti
punti:
123
Methods of jointing / Metodi di giunzione
2. Use PTFE tape to seal the joint. If sealant pastes are used they
must be compatible with the plastic components.
3. Hand tighten and if necessary tighten further to a maximum of
1/4 turn using a strap wrench.
PVCu class 7 and ABS class T pipes, sizes 3⁄8”up to 2” are
manufactured with a thick wall to enable threads to be cut.
Flanges–plastic to plastic/metal
Flanges are suitable for joining metals or rubbers to plastics.
Jointing such parts follow these steps: -
1. Ensure flanges are parallel, close to each other and allow a gap
for the gasket.
2. Insert gasket, ensure that the bolt holes are aligned.
3. Use flat washers between bolt head, the nut and the flange.
1. Scegliere filettature compatibili, per esempio Cilindrica-
Cilindrica, mai clindrica-conica
2. Usare il nastro PTFE (teflon) per sigillare l’accoppiamento, se si
usano sigillanti in pasta questi devono essere compatibili con i
componenti plastici
3. Stringere a mano e, se necessario, stringere ancora per un ¼ di
giro con una chiave a nastro
I tubi in PVCu classe 7 e ABS classe T, misure 3/8” fino a 2” sono
prodotti con uno spessore di parete che permette la filettatura.
Flange in plastica /plastica-metallo
Flange sono disponibili per unire metallo o gomma alla plastica.
Per le unioni seguire i seguenti punti:
1. Controllare che le flange siano parallele, vicine una all’altra e
che abbiamo uno spazio che permetta inserimento della
guarnizione.
2. Inserire la guarnizione, assicurarsi che i fori di fissaggio siano
allineati
3. Usare rondelle piane frai i fori di fissaggio,le flange e i
manicotti.
Flange joint / Accoppiamento di flange Composite unions–metal to plastics union joint CompositeAccoppiamento misto metallo plastica
NOTE: If metal thread is used in conjunction with a plastic thread then the temperature should not vary by more than 5°C.
NOTA:se la filettatura metallica è usata in accoppiamento con una filettatura in plastica la temperatura non dovrebbe variare di più di 5°C
Rubber GasketGuarnizione di gomma
FlangeFlangia
Plastic Female AdaptorGuarnizione di gomma
Metal AdaptorAdattatore Metallico
Gasket / GuarnizioneMetal Union Nut / Ghiera metallica
124
DIN 8077/8078 PP-H (metric) pipe dimensions / DIN 8077/8078 PPH Dimensioni dei tubi (metrici)
Diameter (mm) / Diametro (mm) Wall thickness (mm) / Spessore (mm)
Outside diameterDiametro esterno
Mean outside diameterSpessore medio 6 bar 10 bar
Minimum Maximum Min Max Min Max
16 16 16.3 – – 2.0 2.4
20 20 20.3 1.8 2.2 2.5 3.0
25 25 25.3 1.8 2.2 2.7 3.2
32 32 32.3 2.0 2.4 3.0 3.5
40 40 40.4 2.3 2.8 3.7 4.3
50 50 50.5 2.9 3.4 4.6 5.3
63 63 63.6 3.6 4.2 5.8 6.6
75 75 75.7 4.3 5.0 6.9 7.8
90 90 90.9 5.1 5.9 8.2 9.3
110 110 111.0 6.3 7.2 10.0 11.2
EN1452 part 2 PVCu (metric) pipe dimensions / EN 1452 part 2 PVCu dimensione dei tubi (metrici)
Outside diameter (mm)Diametro esterno (mm)
Average wall thickness (mm) / Spessore medio (mm)
6 bar 10 bar 16 bar
16
20 1.5
25 1.9
32 1.6 2.4
40 1.9 3.0
50 1.5 2.4 3.7
63 1.9 3.0 4.7
75 2.2 3.6 5.6
90 2.7 4.3 6.7
110 2.7 4.2 6.6
125 3.1 4.8 7.4
140 3.5 5.4 8.3
160 4.0 6.2 9.5
180 4.4 6.9 10.7
200 4.9 7.7 11.9
225 5.5 8.6 13.4
250 6.2 9.6 14.8
280 6.9 10.7 16.6
315 7.7 12.1 18.7
Safety factor c = 2.5 / Fattore di sicurezza c = 2.5
Safety factor c = 2 / Fattore di sicurezza c = 2
125
DIN 8061 PVCu (metric) pipe dimensionsDIN 8061 PVCu dimensione dei tubi (metrici)
DIN 8063 PVCu (metric) fitting dimensionsDIN 8063 PVCu dimensione dei raccordi (metrici)
Diameter (mm) / Diametro (mm) Average wall thickness (mm) / Spessore medio Diameter (mm) / Diametro (mm)
Outside diameterDiametro esterno
Mean outside diameter Spessore medio 6 bar 10 bar 16 bar Nominal size
Misura nominale
Mean socket internal diameter at midpoint of socket depthDiametro interno manicotto preso nel punto medio di profondità
Minimum Maximum Minimum Maximum
16 16 16.2 – – 1.2 16 16.1 16.3
20 20 20.2 – – 1.5 20 20.1 20.3
25 25 25.2 – 1.5 1.9 25 25.1 25.3
32 32 32.2 – 1.8 2.4 30 32.1 32.3
40 40 40.2 1.8 1.9 3.0 40 40.1 40.3
50 50 50.2 1.8 2.4 3.7 50 50.1 50.3
63 63 63.2 1.9 3.0 4.7 63 63.1 63.3
75 75 75.3 2.2 3.6 5.6 75 75.1 75.3
90 90 90.3 2.7 4.3 6.7 90 90.1 90.3
110 110 110.3 3.2 5.3 8.2 110 110.1 110.4
125 125 125.3 3.7 6.0 9.3 125 125.1 125.4
140 140 140.4 4.1 6.7 10.4 140 140.2 140.5
160 160 160.4 4.7 7.7 11.9 160 160.2 160.5
180 180 180.4 5.3 8.6 13.4 180 180.3 180.6
200 200 200.4 5.9 9.6 14.9 200 200.3 200.8
225 225 225.5 6.6 10.8 16.7 225 – –
250 250 250.5 7.3 11.9 18.6 250 – –
280 280 280.6 8.2 13.4 20.8 280 – –
315 315 315.6 9.2 15.0 23.4 315 – –
BS 3505 PVCu (imperial) pipe dimensions / BS 3505 PVCu dimensione tubi (British Standard)
BS 4346 part 1 PVCu (imperial) fitting dimensionsBS 4346 part 1 dimensione dei
raccordi (British Standard)
Diameter / Diametro Wall thickness (mm) / Spessore (mm) Diameter (mm)Diametro (mm)
Nominal size
(inch)Misura
nominale(pollici)
Mean outside
diameter (mm)Diametro
medio esterno(mm)
Individual outside
diameter (mm)Scostamento
diametro esterno (mm)
Class C9.0 bar
Class D12.0 bar
Class E15.0 bar
Class 712.0 bar
Mean socket internal diameter at midpoint
of socket depthDiametro interno
manicotto preso nel punto medio di profondità
AverageMedia
IndividualScostamento
AverageMedia
IndividualScostamento
AverageMedia
IndividualScostamento
AverageMedia
Min Max Min Max Min Max Min Max Min Max Min Max
3/8” 17.0 17.3 17.0 17.3 – – – – – – 1.9 1.5 1.9 – 17.1 17.3
½” 21.2 21.5 21.2 21.5 – – – – – – 2.1 1.7 2.1 4.0 21.3 21.5
¾” 26.6 26.9 26.6 26.9 – – – – – – 2.5 1.9 2.5 4.2 26.7 26.9
1” 33.4 33.7 33.3 33.8 – – – – – – 2.7 2.2 2.7 4.8 33.5 33.7
1¼” 42.1 42.4 42.0 42.5 – – – 2.7 2.2 2.7 3.2 2.7 3.2 5.2 42.2 42.4
1½” 48.1 48.4 48.0 48.5 – – – 3.0 2.5 3.0 3.7 3.1 3.7 5.5 48.2 48.4
2” 60.2 60.5 60.0 60.7 3.0 2.5 3.0 3.7 3.1 3.7 4.5 3.9 4.5 5.9 60.3 60.5
2½* 75.0 75.3 75.0 75.3 3.6 – – – – – 5.6 – – – 75.1 75.3
3” 88.7 89.1 88.4 89.4 4.1 3.5 4.1 5.3 4.6 5.3 6.5 5.7 6.6 – 88.8 89.1
4” 114.1 114.5 113.7 114.9 5.2 4.5 5.2 6.8 6.0 6.9 8.3 7.3 8.4 – 114.2 114.5
5* 140.0 140.4 139.4 141.0 6.3 5.5 6.4 8.3 7.3 8.4 10.1 9.0 10.4 – 140.1 140.4
6” 168.0 168.5 167.4 169.1 7.5 6.6 7.6 9.9 8.8 10.2 12.1 10.8 12.5 – 168.2 168.5
8” 218.8 219.4 218.0 220.2 8.8 7.8 9.0 11.6 10.3 11.9 14.1 12.6 14.5 – 219 219.4
10” 272.6 273.4 271.6 274.4 10.9 9.7 11.2 14.3 12.8 14.8 17.5 15.7 18.1 – – –
12” 323.4 324.3 322.2 325.5 12.9 11.5 13.3 17.0 15.2 17.5 20.8 18.7 21.6 – – –
NOTE: All PVCu ball valve imperial socket ends are manufactured in accordance with BS 4346 part 1 for mean socket internal diameter. The mean outside diameter of a pipe is arrived at either by taking the average of any two outside diameter measurements when measured at right angles to each other or by measuring with a circumference tape. * Sizes 2½” and 5” are not British Standard sizes but the equivalent metric size. They have been included for continuity of size only.
Nota: Tutti i manicotti delle valvole a sfera British Standard sono prodotti in accordo con la BS 4346 part 1 per i diametri medi interni. Il diametro medio esterno dei tubi è calcolato prendendo la media delle misurazioni in due punti qualsiasi del diametro esterno misurato perpendicolarmente o con un nastro di misura. * Le misure 2”1/2” e 5” non son British Standard ma equivalenti metrici. Sono state incluse solo per completezza.
Pipe and fittings dimensions / Dimensioni Tubi e Raccordi
126
BS 5391 ABS (imperial) pipe dimensions / BS 5391 ABS dimensione tubi (British Standard)
BS 5392 part 1 ABS (imperial) fitting dimensionsBS 5392 part 1 dimensione
dei raccordi (British Standard)
Diameter / Diametro Wall thickness (mm) / Spessore (mm)
Minimum socket depth (mm)
Profonditàminima
manicotto(mm)
Mean socket internal diameter (mm)
Diametro internomedio manicotto (mm)Nom
size (inch)
Mis.nom.
(pollici)
Meanoutside
diameter (mm)Diametro
medio esterno(mm)
Individual outside
diameter (mm)Scostamento
diametro esterno (mm)
Class B6.0 bar
Class C9.0 bar
Class D12.0 bar
Class E15.0 bar
Class T12.0 bar
RootFondo
MouthBocca
Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
3/8 17.0 17.3 17.0 17.3 – – – – – – 1.6 1.8 3.4 3.6 14.5 16.9 17.3 17.1 17.3
½ 21.2 21.5 21.2 21.5 – – – – – – 1.9 2.1 3.5 3.7 16.5 21.1 21.4 21.3 21.5
¾ 26.6 26.9 26.6 26.9 – – – – – – 2.4 2.6 3.5 3.7 19.5 26.4 26.8 26.7 26.9
1 33.4 33.7 33.4 33.7 – – 1.9 2.1 2.5 2.7 3.0 3.3 4.2 4.5 22.5 33.2 33.6 33.5 33.7
1¼ 42.1 42.4 42.0 42.4 – – 2.4 2.6 3.1 3.4 3.8 4.1 5.1 5.5 27.0 47.9 42.3 42.2 42.5
1½ 48.1 48.4 48.0 48.5 – – 2.7 3.0 3.6 3.9 4.4 4.7 5.8 6.2 30.0 47.9 48.3 48.2 48.6
2 60.2 60.5 60.0 60.7 – – 3.4 3.7 4.5 4.9 5.4 5.8 7.0 7.4 36.0 60.0 60.4 60.3 60.7
2½ 75.0 75.3 75.0 75.3 – – 3.6 – – – 5.6 – – – Refer to metric equivalent
3 88.7 89.1 88.4 89.4 – – 5.0 5.3 6.5 6.9 8.0 8.5 – – 50.5 88.5 88.9 89.0 89.3
4 114.1 114.5 113.7 114.9 – – 6.4 6.9 8.4 8.9 10.3 10.9 – – 63.0 113.9 114.3 114.4 114.8
5 140.0 140.4 140.0 140.4 – – 6.7 – – – 10.4 – – – Refer to metric equivalent
6 168.0 168.5 167.4 169.1 6.1 6.4 9.4 10.4 12.3 13.3 – – – – 90.0 167.8 168.3 168.4 168.8
8 218.8 219.4 218.1 220.2 8.4 8.8 12.2 13.2 – – – – – – 115.5 218.7 219.1 219.3 219.9
NOTE: All ABS ball valve imperial socket ends are manufactured in accordance with BS 5392 part 1 for mean socket internal diameter. The mean outside diameter is arrived at either by taking the average of any two outside diameter measurements when measured at right angles to each other or by measuring with a circumference tape.
Nota: Tutti i manicotti delle valvole a sfera British Standard sono prodotti in accordo con la BS 4346 part 1 per i diametri medi interni. Il diametro medio esterno dei tubi è calcolato prendendo la media delle misurazioni in due punti qualsiasi del diametro esterno misurato perpendicolarmente o con un nastro di misura.
127
Guide to chemical resistance / Guida alla resistenza chimica
Guide to chemical resistance
The use of thermoplastic pipe systems within the domestic and
industrial markets is now widespread. Thermoplastics have not
only replaced traditional materials such as steel, ductile iron and
copper within the water industry, but have also replaced expensive
lined metal and glass systems within the chemical industries.
Because of this diversity of use, it is essential that the most
suitable plastic material is matched to its proposed application.
This section will provide a guide to compatible material selection.
The information within this section has been collated from tests
carried out by both national and international standards
organisations (ISO) as well as tests performed by independent test
houses. The tests were based on the use of pure chemicals. For
mixed chemicals, we would advise that pilot tests should be
undertaken in order to ascertain the resistance of the material
under these circumstances.
Chemical resistance classifications
The chemical resistance section should only be looked on as a
general guide. Changes to the composition, concentrations or
working conditions under which chemicals are used, can alter the
resistance of the material.
Guida alla resistenza chimica
L’uso di sistemi di tubature in materiale termoplastico per usi
domestici e industriali è ora molto diffuso. I materiali termoplastici
non solo hanno sostituito i materiali tradizionali come l’acciaio, la
ghisa e il rame nel trasporto dell’acqua, ma hanno anche sostituito
materiali coibentanti e vetro per l’industria chimica. La causa di
questi differenti usi è principalmente che per ogni impiego è
abbinabile un appropriato materiale termoplastico.
Questo capitolo fornisce una guida alla compatibilità chimica dei
materiali. Le informazioni contenute in questa sezione sono state
raccolte da tests eseguiti da molte organizzazioni internazionali di
standardizzazione (ISO) e anche da laboratori indipendenti.
I test sono basati sull’uso di prodotti chimici puri. Per miscele di
prodotti, dobbiamo avvisare che test particolari dovrebbero essere
eseguiti per accertare la resistenza dei materiali in date
circostanze.
Classificazione delle resistenze chimiche
La sezione della resistenza chimica dovrebbe essere consultata
come semplice guida. Cambi di composizione, concentrazione o
condizioni di esercizio ai quali i composti chimici possono essere
usati potrebbero alterare la resistenza chimica dei materiali.
Terminology for chemical resistance tables
Symbol/term Description
+ Resistant
0 Conditionally resistant
– Not resistant
"Blank" Where section is blank there is no test data available
Technical grade Technically pure
SaturatedMedia has reached its maximum absorption in water
at ambient temperature, which is the point where there can be no further absorption.
Aqueous A solution below maximum absorption, expressed as a percentage (%) of saturation (concentration)
Suspension Insoluble or partially soluble solid carried in an aqueous base normally prepared at ambient temperature
CommercialProprietaryIndustrial
Self explanatory, grades of chemical named brands in general use
Terminologia per tavole di resistenza chimica
Simboli Descrizione
+ Resistente
0 Resistente con riserva
– Non resistente
"Blank" Non sono disponibili dati al riguardo dove la sezione è vuota
Technical grade Tecnicamente puro
Saturazioneil punto di massimo assorbimento di acqua
alla temperatura ambiente raggiunto dal composto, il punto in cui non c’è più assorbimento di acqua
Aqueous Una soluzione sotto il punto di massimo assorbimento, espresso in % di saturazione (concentrazione)
Sospensione Prodotto insolubile o parzialmente solubile, parte solida in base acquosa normalmente preparata a temperatura ambiente
CommercialProprietaryIndustrial
brand generalmente usato come Nome chimico
128
Pipe joints: solvent cement
ABS pipe joints, made with “Effast” ABS solvent cement, are
classed as resistant as the material itself. PVCu pipe joints, made
with “Effast” PVCu solvent cement, are normally classed as
resistant as the material. However the following chemicals and
their concentrations are the exception.
Media Concentration
Hydrochloric acid, HCL 25% and above
Hydrofluoric acid, HF All concentrations
Nitric acid, HNO3 20% and above
Sulphuric acid, H2SO4 70% and above
Joints in contact with the above acids can only be classed as being
conditionally resistant. To make joints classed as resistant, “Dytex”
solvent cement made by “Henkel” or an equivalent should be
used.
Pipe joints: fusion
Fusion joints are regarded as generally having the same chemical
resistance as the material itself. However the jointing process can
leave a certain amount of residual stress within the joint.
Seals and seat materials
The working life of seals and seat materials is often different from
that of the pipe system and greatly dependent on the working
conditions involved.
The following table outlines their general resistance.
Incollaggio di tubi: Colla
La colla per ABS e quella per PVCu “Effast” sono normalmente
classificate come resistente a tutti i materiali. In ogni caso i
seguenti prodotti possono essere eccezioni:
Concentrazione media
AcidoIdrocloridrico, HCL 25% e superiore
Acido fluoridrico HF Tutte le concentrazioni
Acido Nitrico Hno3 20% e superiore
Acido Solforico H2so4 70% e superiore
Incollaggi a contatto con gli acidi sopra descritti possono essere
considerati come “parzialmente resistenti” Per eseguire incollaggi
classificati come “resistenti” usare colla “Dytex” prodotta da
“Henkel” o una colla equivalente.
Incollaggio: fusione
Le giunzioni a fusione hanno generalmente le stesse resistenze
chimiche del materiale con cui sono fatte. In ogni caso il processo
di fusione può lasciare nel punto di fusione uno stress residuo.
Guarnizioni e tenute
La durata di una guarnizione o del materiale di una tenuta
dipende spesso dalle condizioni di lavoro del sistema di
tubazione.
La tabella che segue fornisce le linee guide generali
Seal and seat material
Material type Resistance
EPDM–Ethylene Propylene RubberSatisfactory resistance to most
aggressive chemicals, not suitable for oils or fat
FPM–Fluorine Rubber The most resistant of theelastomers to solvents
NBR–Nitrile Rubber Not resistant to oxidisingagents, but resists petrol and oils
PTFE–Polytetrafluoroethylene Resists all the chemicals shown in tables
Guarnizioni e materiali di tenuta
Tipo di materiale Resistenza
EPDM Gomma Etilene-PpropileneResistenza soddisfacente
ai più aggressivi prodotti chimici, non adatta ad oli o grassi
FPM Gomma fluorata La più resistente degli elastomeri agli agenti chimici
NBR Gomma nitrilica Non resistente agli agenti ossidanti, ma resistente agli oli e ai prodotti petrolchimici
PTFE polytetrafluoroetilene Resistente a tutti i prodotti chimici mostrati in tabella
129
Material °C ConcentrationPVCu ABS EPDM FPM
20 40 60 20 40 60 80 20 40 60 80 20 60 80 100 120
Acetaldehyde technically pure – – + 0 – 0 –
40%, aqueous solution 0 – – + + + + + 0 0
Acetic Acid technically pure, 0 – – 0 –
glacial 10% aqueous + + 0 + 0 – + + 0 0 –
Acetic Acid Anhydride technically pure – – 0 –
Acetone technically pure – – + + + –
Acrylonitrile technically pure – – + + 0 0 –
Adipic Acid saturated, aqueous + + 0 – + + + + +
Alcoholic Spirits app. 40% ethyl alcohol + – + +
Allyl Alcohol 96% 0 – – 0 0 0 0 –
Aluminium Chloride saturated + + + + + + 0 + + + + + + + +
Aluminium Sulphate cold saturated, aqueous + + + + + + 0 + + + + + +
Ammonia gaseous, tech. pure + + + – + +
Ammonium Acetate aqueous, all – + + + 0 + +
Ammonium Hydrogen Fluoride 50%, aqueous + + 0 – + +
Ammonium Compounds: See Sodium
Amyl Acetate technically pure – – 0 –
Amyl Alcohol technically pure + + 0 – + + + 0
Aniline technically pure – – – 0 0
Aniline Hydrochloride aqueous, saturated + 0 – + + + + 0 –
Antimony Trichloride 90%, aqueous + + – + +
Aqua Regia + 0 – – 0
Arsenic Acid 80%, aqueous + + 0 + + + 0 + + + + + + + +
Barium Hydroxide aqueous, saturated + + 0 + + + 0 + + + + + + +
Barium Salts aqueous, all + + + + + + 0 + + + + + + +
Beef Tallow Emulsion, Sulphonated usual commercial + – +
Beer usual commercial + + + + + + 0 + +
Benzaldehyde aqueous, saturated – – + + + + +
Benzene technically pure – – – +
Benzine free of lead and aromatic compounds + + + – – + +
Benzoic Acid aqueous, all + + 0 + + 0 – – + + + 0
Benzyl Alcohol technically pure 0 – + 0
Bleaching Lye 12.5% active chlorine aqueous + + 0 0 + +
Borax aqueous, all + + 0 0 + + + + + + +
Boric Acid aqueous, all + + 0 + + + 0 + + + + + + + +
Brine, Sea Water + + 0 + + + + + + + + + + + +
Bromine, Liquid technically pure – – – +
Butadiene technically pure + – – 0
Butane technically pure + + – +
Butanediol aqueous, 10% + 0 – + + + + +
Butanol technically pure + + 0 – + + + + 0
Butyl Acetate technically pure – – + – 0 –
Butyl Phenol, P–Tertiary technically pure 0 – – – 0
Butylene Glycol technically pure + + 0 + + + 0 + + + + 0
Butylene Liquid technically pure + – 0 +
Butyric Acid technically pure + – 0 0
Calcium Bisulphate cold saturated, aqueous + + + + + +
Calcium Chloride saturated, aqueous, all + + 0 + + + 0 + + + + + + + +
Calcium Hydroxide aqueous, saturated + + + + + + 0 + + + + + + + +
Calcium Hypochlorite cold saturated, aqueous + + + + – + + + + + +
Calcium Nitrate 50%, aqueous + + + + + 0 + + + + + +
Carbon Dioxide (Carbonic Acid) technically pure, moist + + 0 + + + 0 + + + + + + +
Carbon Disulphide technically pure – – – +
Carbon Tetrachloride technically pure – – – + +
Caustic Soda Solution up to 40%, aqueous + + 0 + + + 0 + + + 0 –
(Sodium Hydroxide) up to 50%, aqueous + + + + + + 0 + + 0 –
Chloral Hydrate technically pure – – 0 0
Chloric Acid 10%, aqueous + + 0 – + + + –
Chlorine moist, 97% gaseous 0 – 0 +
anhydrous, tech. 0 – 0 +
= No Data – = Not Recommended 0 = Conditionally Resistant + = Resistant
Guide to chemical resistance / Guida alla resistenza chimica
130
Material °C ConcentrationPVCu ABS EPDM FPM
20 40 60 20 40 60 80 20 40 60 80 20 60 80 100 120
Chlorine pure liquid, technically pure – – – 0
Chlorine Water saturated 0 0 0 0 0 0
Chloroacetic Acid, Mono 50%, aqueous + + – 0 –
Chloroenzene technically pure – – – –
Chloroethanol technically pure – – 0 –
Chloroform technically pure – – – 0
Chlorosulphonic Acid technically pure 0 – – –
Chrome Alum (Chromium Potassium Sulphate) cold saturated, aqueous + + + + + + 0 + + + + + + + +
Chrome Acid all, aqueous + – 0 + 0
Cider + + + + +
Citric Acid 10% aqueous + + 0 + + + 0 + + + + +
Copper Salts all, aqueous + + 0 + + + 0 + + + + + + +
Corn Oil technically pure 0 0 0 – + +
Cresol cold saturated, aqueous 0 – – +
Crotonic Aldehyde technically pure – – + +
Cyclohexane technically pure – – – +
Cyclohexanol technically pure + + + – – +
Cyclohexanone technically pure – – 0 –
Detergents (Washing Powders) usual washing lathers + + 0 – + + + + +
Dextrine (Starch Gum) usual commercial + + + + + + 0 + + + + +
Dibutyl Ether technically pure – – – + 0
Dibutyl Phthlate technically pure – – 0 0
Dibutyl Sebacate technically pure – – + +
Dichloroacetic Acid technically pure + + 0 – + + + 0 –
Dichloroacetic Acid Methtl Esher technically pure – – + + 0 –
Dichlorobenzene technically pure – – – +
Dichloroethylene technically pure – – – 0
Diesel Oil + + 0 – +
Diethylamine technically pure 0 – 0
Di-Isobutyl Ketone technically pure – – 0 –
Dimethyl Formamide technically pure – – 0 +
Dimethylamine technically pure 0 – 0 –
Ethyl Acetate technically pure – – 0 0 0 –
Ethyl Alcohol technically pure, 96% + + 0 – + + + + 0 0
Ethyl Alcohol + Acetic Acid fermentation mixture + + 0 – + + 0 0 0 0
Ethyl Benzene technically pure – – – 0
Ethyl Chloride technically pure – – – 0
Ethyl Ether technically pure – – – –
Ethylene Chloride technically pure – – 0 0 – + 0
Ethylene Diamine technically pure 0 – + + + 0 –
Ethylene Glycol technically pure + + + + + + 0 + + + + + 0
Ethylene Oxide technically pure, liquid – – 0 –
Fatty Acids >C6 technically pure + + + – – +
Fatty Alcohol Sulphonates aqueous + + 0 – + + + + +
Ferric Chloride saturated + + + – + + + 0 + + + + +
Ferric Nitrate saturated + + + + 0 – + + 0 – + + + + +
Ferrous Sulphate + + + + + + 0 + + + + + + + + +
Fluosilicic Acid 32%, aqueous + + + + + + 0 0 0 – –
Formaldehyde 40%, aqueous + + + + + 0 + + + + +
Formamide technically pure – – + 0
Formic Acid technically pure + 0 – – + + + 0 –
Fruit Juices + + + + + + 0 + + + + + + + + +
Fuel Oil + 0 0 – + +
Furfuryl Alcohol technically pure – – 0 –
Gelatine all, aqueous + + + + + 0 + + +
Glucose all, aqueous + + 0 + + + 0 + + + + + + + +
Glycerine technically pure + + + + + 0 + + + 0 + 0 –
Glycocoll 10%, aqueous + + + + + +
Glycolic Acid 37%, aqueous + + + + +
Heptane technically pure + + – – + +
= No Data – = Not Recommended 0 = Conditionally Resistant + = Resistant
131
Guide to chemical resistance / Guida alla resistenza chimica
Material °C ConcentrationPVCu ABS EPDM FPM
20 40 60 20 40 60 80 20 40 60 80 20 60 80 100 120
Hexane technically pure + + – – + +
Hydrazine Hydrate aqueous + – + +
Hydrobromic Acid 50%, aqueous + + + + + + + 0 – + + 0 –
Hydrochloric Acid up to 10%, aqueous + + 0 + + 0 – + + + + + + +
up to 36%, aqueous + + 0 – + 0 – + –
Hydrocyanic Acid technically pure + + 0 + + + 0 +
Hydrofluoric Acid up to 10%, aqueous + 0 0 + + – + 0
40%, aqueous + – – +
70%, aqueous + – – +
Hydrogen technically pure + + + + + + 0 + + + + + + + +
Hydrogen Chloride tech. pure, gaseous + + 0 – + + + + +
Hydrogen Peroxide 3%, aqueous + + 0 + + + 0 – + –
30%, aqueous + + – 0 – + 0 –
90%, aqueous – 0 0
Hydrogen Sulphide technically pure + + + + + 0 – + 0 –
Iodine Solution 6.5% iodine in ethanol – – + +
Iron Salts all, aqueous + + 0 + + + + + + + + + +
Iso-Octane technically pure + – – +
Isopropyl Alcohol technically pure + – + + + 0 + + 0
Isopropyl Ether technically pure – – – –
Lactic Acid 10%, aqueous + 0 – + 0 – 0 0 0 – + 0 0
Lanolin technically pure + 0 + + + 0 0 – + +
Lead Acetate aqueous, saturated + + + + + + 0 + + + + +
Linseed Oil technically pure + + 0 + 0 – + +
Lubricating Oils + + + 0 – + + 0 –
Magnesium Salts all, aqueous + + 0 + + + + + + + + + +
Maleic Acid cold saturated, aqueous + + 0 + 0 – + + –
Mercury pure + + + + + + + + + +
Mercury Salts cold, saturated, aqueous + + 0 + + + + + +
Methane (Natural Gas) technically pure + + – +
Methanol all + + 0 – + + + 0 0
Methyl Acetate technically pure – – 0 –
Methyl Amine 32%, aqueous 0 – + +
Methyl Bromide technically pure – – – 0
Methyl Chloride technically pure – – 0 –
Methylene Chloride technically pure – – – 0
Methyl Ethyl Ketone technically pure – – + 0 –
Milk + + + + + + 0 + +
Molasses + + 0 + + 0 + + + + + + +
Monochloroacetic Acid Ethyl Ester technically pure 0 – + 0
Monochloroacetic Acid Methyl Ester technically pure 0 – + 0
Morpholin technically pure – – 0 +
Naphthalene technically pure – – – + +
Nickel Salts cold saturated, aqueous + + 0 + + + – + + + + + + + +
Nitric Acid 5%, aqueous + + + + 0 – + + 0 + 0 –
up to 40%, aqueous + + 0 – + + 0 + + 0
65%, aqueous 0 0 – – – + –
Nitrobenzene technically pure – – – 0
Nitroluene (O-, M-, P-) technically pure – – – 0 –
Nitrous Gases diluted, moist, anhydrous + 0 0 + + 0 + +
Oleic Acid technically pure + + + + 0 – – + –
Olive Oil + + + + – + + +
Oxalic Acid cold saturated, aqueous + + + + + 0 0 0 – + 0 –
Oxygen technically pure + + + + + + – + + + + + + + + +
Ozone cold saturated, aqueous + + – + 0 – + –
Palmitic Acid technically pure + – 0 – + –
Palm Oil, Palm Nut Oil + – + 0 – + +
Paraffin Emulsions usual comm., aqueous + + – – + + +
Paraffin Oil + + 0 + + + 0 – + + 0
Perchloric Acid 10%, aqueous + + 0 + + + + + 0 + + 0
= No Data – = Not Recommended 0 = Conditionally Resistant + = Resistant
132
Material °C ConcentrationPVCu ABS EPDM FPM
20 40 60 20 40 60 80 20 40 60 80 20 60 80 100 120
Perchloric Acid 70%, aqueous 0 – + + + 0 + + 0
Perchloroethylene (Tetrachloroethylene) technically pure – – – + +
Petroleum technically pure + – – + 0
Petroleum Ether technically pure + + + – – + 0
Petroleum Jelly technically pure 0 – – – + + + + +
Phenol up to 90%, aqueous 0 – – + –
Phenylhydrazine technically pure – – 0 + 0
Phenylhydrazine Hydrochloride aqueous 0 – + + 0 + 0 –
Phosgene gaseous, technically pure + 0 0 – + + + + 0
Phosphoric Acid 85%, aqueous + + + + + 0 – + + + 0 + + + 0
Phosphorous Pentoxide technically pure + + + + + + + + +
Photographic Developer usual commercial + + 0 + + 0 + + +
Photographic Emulsion + + + + + + +
Photographic Fixer usual commercial + + 0 + + 0 + + +
Phthalic Acid saturated, aqueous + 0 – – + + 0 –
Picric Acid 1%, aqueous + – + + 0 + + 0
Potash (Potassium Carbonate) cold saturated, aqueous + + + + + 0 + + +
Potassium Permanganate cold saturated, aqueous + + 0 – + + + + + +
Potassium Compounds: See Sodium
Propane technically pure, liquid + + – +
Propanol, N- And Iso- technically pure + 0 0 – + + + + +
Propionic Acid 50%, Aqueous + + 0 – + + + + 0
Propylene Glycol technically pure + + + 0 + + + + 0
Propylene Oxide technically pure 0 – + –
Pyridine technically pure – – + 0 – 0 –
Silicone Oil + 0 – + 0 – + +
Silver Salts cold saturated, aqueous + + 0 + + + 0 + + + + +
Soap Solution all, aqueous + + 0 + + + 0 + + + + +
Sodium Acetate all, aqueous + + + + 0 + + + 0 + + 0
Sodium Benzoate cold saturated, aqueous + + 0 – + + + 0 + + 0
Sodium Bicarbonate cold saturated, aqueous + + + + + + + + + +
Sodium Bisulphate 10%, aqueous + + 0 + + + 0 + + + +
Sodium Bisulphite all, aqueous + 0 – + + + 0 + + + 0 0 –
Sodium Bromate all, aqueous + 0 + + + 0 + + + + +
Sodium Bromide all, aqueous + + 0 + + + 0 + + + + + +
Sodium Carbonate (Soda) cold saturated, aqueous + + + + + + 0 + + + + + +
Sodium Chlorate all, aqueous + + 0 + + + 0 + + + 0 + + +
Sodium Chloride all, aqueous + + 0 + + + 0 + + + + + + + +
Sodium Chlorite diluted, aqueous 0 + + + + +
Sodium Chromate 10%, aqueous + + 0 + + + 0 + + + + +
Sodium Disulphate all, aqueous + + 0 + + + + +
Sodium Dithionite (Hyposulphite) up to 10%, aqueous + + 0 + + + + +
Sodium Fluoride cold saturated, aqueous + + + + + 0 + + + + +
Sodium Hydroxide See Caustic Soda
Sodium Hypochlorite aqueous (12.5% active) + + 0 – + +
Sodium Iodide all, aqueous + + 0 + + + 0 + + + + +
Sodium Nitrate cold saturated, aqueous + + 0 + + + + + + +
Sodium Nitrite cold saturated, aqueous + + + + 0 + + + + +
Sodium Oxalate cold saturated, aqueous + + 0 + +
Sodium Persulphate cold saturated, aqueous + + 0 + + + + + + + +
Sodium Phosphate cold saturated, aqueous + + 0 + – + + + + +
Sodium Silicate all, aqueous + + 0 + + + 0 + + + + +
Sodium Sulphate cold saturated, aqueous + + 0 + + + 0 + + 0 + + +
Sodium Sulphide cold saturated, aqueous + + 0 + + + 0 + + + –
Sodium Sulphite cold saturated, aqueous + + 0 + + + + + + +
Sodium Thiosulphate cold saturated, aqueous + + 0 + – + + + + +
Spirits (Brandy) usual commercial + + + – + + + + + + 0
Stannous Chloride cold saturated, aqueous + 0 0 + + + 0 – + +
Starch Solution all, aqueous + + + + + + + + + +
Stearic Acid technically pure + + + + + + + 0 + 0
= No Data – = Not Recommended 0 = Conditionally Resistant + = Resistant
133
Guide to chemical resistance / Guida alla resistenza chimica
Material °C ConcentrationPVCu ABS EPDM FPM
20 40 60 20 40 60 80 20 40 60 80 20 60 80 100 120
Succinic Acid all, aqueous + + + + + + + + +
Sugar Syrup usual commercial + + 0 + + + 0 + + + + + + +
Sulphur technically pure 0 – – – + + +
Sulphur Dioxide all, moist, + + 0 – + + 0 – + –
technically pure, liquid – – 0 0
Sulphur Trioxide – – – +
Sulphuric Acid up to 30%, aqueous + + 0 + + 0 0 + + + 0 + + 0 –
up to 50%, aqueous + + + + 0 – + + 0 – + + 0
up to 80%, aqueous + + + – + 0 – + 0 –
up to 90%, aqueous + + – 0 – +
up to 96%, aqueous + + 0 – – +
Sulphurous Acid saturated, aqueous + + 0 – + 0 – + 0 –
Tallow technically pure + + + + + + + + + +
Tannic Acid all, aqueous + + + + +
Tartaric Acid all, aqueous + + 0 + + + 0 – + +
Tetrachloroethane technically pure – – – 0
Tetraethyl Lead technically pure + – 0 +
Tetrahydrofurane technically pure – – – –
Thionyl Chloride technically pure – – – –
Toluene technically pure – – – 0 –
Tributylphosphate technically pure – – + –
Trichloroethylene technically pure – – – +
Trichloroacetic Acid 50%, aqueous + 0 – 0 –
Trichloroethane (Methylchloroform) technically pure – – – +
1,2,2-Trifluoroethane (Freon 113) technically pure + + – +
Tricesyl Phosphate technically pure – – – –
Triethanolamine technically pure 0 – – +
Triethylamine technically pure + –
Trioctyl Phosphate technically pure – – – –
Turpentine Oil technically pure + 0 – – + +
Urea + + 0 – + + + + +
Urine + + 0 + + + + + + +
Vegetable Oils And Fats + 0 + + – + +
Vinegar + + + + + + 0 + 0 – 0 –
Vinyl Acetate – + + 0 – + +
Vinyl Chloride – – 0 +
Waste Gases, Alkaline + + + – + + + + + + 0 –
Waste Gases Containing:
- Carbon Oxides all + + + + + + + + + + +
- Hydrochloric Acid all + + + + + + 0 + + + +
- Hydrogen Fluoride traces + + + + + 0 + + +
- Nitrous Gases traces + + + + + + 0 + + + 0
- Sulphur Dioxide traces + + + + + + + + + +
- Sulphur Trioxide traces + + + + + + 0 + + +
- Sulphuric Acid all + + + + + + 0 + + +
Water, Condensed + + 0 + + + – + + 0 + + +
Water, Distilled, De-Ionised + + + + + + – + + 0 – + + + + +
Water, Drinking + + + + + + – + + 0 + + + +
Wax Alcohol technically pure + + + – – + +
Wetting Agents up to 5%, aqueous + + 0 + + +
Wines, Red And White usual commercial + + + + 0 + +
Wine Vinegar usual commercial + + + + + + 0 0 –
Yeast all, aqueous + + + + + +
Xylene technically pure – – – + –
Zinc Salts all, aqueous + + 0 + + + + + + +
= No Data – = Not Recommended 0 = Conditionally Resistant + = Resistant
The data in the tables is based on information from the raw material suppliers, gained using direct contact between the chemical and the unprocessed raw material. The resistance of any of the finished products against these media has not been verified. There is no given or intended legally binding assurance of material properties or of suitability for a specific purpose. Materials must be tested under actual service conditions to determine the suitability for a specific application.
134
Volumetric rate of flow (liquid)
litre litre per minute l/min cubic metre per hour m3/h cubic foot per hour ft3/h cubic foot per minute
ft3/muk gallon per minute uk
gal/minus gallon per minute us
gal/min us barrel/d
1 60 3.6001 127.136 2.1189 13.1986 15.8508 543.456
0.0167 1 0.0600 2.1189 0.3532 0.22 0.2642 9.0576
0.2778 16.6666 1 35.3147 0.5886 3.6662 4.4029 150.956
0.0079 0.4719 0.0283 1 0.1067 0.1038 0.1247 4.2746
0.4719 28.316 1.6990 60 1 6.2288 7.4805 256.475
0.0758 4.546 0.2728 9.6326 0.1605 1 1.201 41.1754
0.0631 3.7853 0.2271 8.0208 0.1337 0.8327 1 4.2857
0.0018 0.1104 0.0066 0.2339 0.0039 0.0243 0.0292 1
Pressure and liquid head
kilogram force per square centimetre
pound force per square inch
foot of water inch of water metre of water centimetre of mercury inch of mercury
a bar b kgf/cm2 c lbf/in2 d atm e ft h2o in h2o m h2 cm hg in hg f mm hg
1 1.0197 14.5038 0.9869 33.4553 401.463 10.1972 75.0062 29.530 29.530
0.9807 1 14.2233 0.9878 32.8084 393.701 10 73.556 28.959 28.959
0.0689 0.0703 1 0.0609 2.3067 27.68 0.7031 5.1715 2.036 2.036
1.0133 1.0332 14.6959 1 33.889 406.782 10.3323 76.0 29.9213 29.9213
0.0299 0.0305 0.4335 0.0295 1 12 0.3048 2.242 0.8827 0.8827
0.0025 0.0025 0.0361 0.0025 0.0833 1 0.0254 0.1868 0.0734 0.0734
0.0981 0.1000 1.422 0.0968 3.2808 39.3701 1 7.3556 2.896 2.896
0.0133 0.0136 0.1934 0.0132 0.4461 5.3524 0.136 1 0.3937 0.3937
0.0339 0.0345 0.4911 0.0334 1.133 13.5951 0.3453 2.54 1 1
0.0013 0.0014 0.0193 0.0013 0.446 0.5352 0.0136 0.1 0.0394 0.0394
a1 bar = 105N/m2 b Technical (metric) atmosphere (at) c Often denoted non-technically as psi d International standard atmosphere e At density 1g/cm3 f Also known as torr
Dimesions of flanges (mm)
flange size bs4504 pn6 bs4504 pn10 bs4504 pn16inch n.b.mm nominal pcd od bolt no bolts pcd od bolt no bolts pcd od bolt no bolts1/2” 20 15 55 80 M10 4 65 95 M12 4 65 95 M12 43/4” 25 20 65 90 M10 4 75 105 M12 4 75 105 M12 41” 32 25 75 100 M10 4 85 115 M12 4 85 115 M12 4
11/4” 40 32 90 120 M12 4 100 140 M16 4 100 140 M16 411/2” 50 40 100 130 M12 4 110 150 M16 4 110 150 M16 4
2” 63 50 110 140 M12 4 125 165 M16 4 125 165 M16 421/2” 75 65 130 160 M12 4 145 185 M16 4 145 185 M16 4
3” 90 80 150 190 M16 4 160 200 M16 8 160 200 M16 84” 110 100 170 210 M16 4 180 220 M16 8 180 220 M16 85” 140 125 200 240 M16 8 210 240 M16 8 210 240 M16 86” 160 150 225 265 M16 8 240 285 M20 8 240 285 M20 88” 225 200 280 320 M16 8 295 340 M20 8 295 340 M20 1210” 280 250 335 375 M16 12 350 395 M20 12 355 405 M24 1212” 315 300 395 440 M20 12 400 445 M20 12 410 460 M24 12
flange size bs10 table d bs10 table e asa 150inch n.b.mm nominal pcd od bolt no bolts pcd od bolt no bolts pcd od bolt no bolts1/2” 20 15 67 95 1/2” 4 67 95 1/2” 4 67 95 1/2” 43/4” 25 20 73 102 1/2” 4 73 102 1/2” 4 73 102 1/2” 41” 32 25 83 114 1/2” 4 83 114 1/2” 4 83 114 1/2” 4
11/4” 40 32 87 121 1/2” 4 87 121 1/2” 4 87 121 1/2” 411/2” 50 40 98 133 1/2” 4 98 133 1/2” 4 98 133 1/2” 4
2” 63 50 114 152 5⁄8” 4 114 152 5⁄8” 4 114 152 5⁄8” 421/2” 75 65 127 165 5⁄8” 4 127 165 5⁄8” 4 127 165 5⁄8” 4
3” 90 80 146 184 5⁄8” 4 146 184 5⁄8” 4 146 184 5⁄8” 44” 110 100 178 216 5⁄8” 4 178 216 5⁄8” 4 178 216 5⁄8” 45” 140 125 210 254 5⁄8” 8 210 254 5⁄8” 8 210 254 5⁄8” 86” 160 150 235 279 5⁄8” 8 235 279 5⁄8” 8 235 279 5⁄8” 88” 225 200 292 337 5⁄8” 8 292 337 5⁄8” 8 292 337 5⁄8” 8
10” 280 250 356 406 3/4” 8 356 406 3/4” 8 356 406 3/4” 812” 315 300 406 457 3/4” 12 406 457 3/4” 12 406 457 3/4” 12
135
IMPORTANT NOTICEThis Document has been prepared as a guide only. Data, discussion and conclusions developed herein are for information only and are not intended for use without independent substantiation. Potential users should apply the information at their own discretion.
Information in this publication must not be reproduced in whole or in part without the permission of Polypipe. The contents are given in good faith and no warranty is given or implied in respect of such information. Polypipe reserve the right to amend this specification without prior notice and all transactions are subject to our standard Conditions of Sale. and are registered Trademarks of Polypipe. All Polypipe products are protected by Design Right under CDPA 1988. Copyright © 2014 Polypipe. All rights reserved.
AVVISO IMPORTANTE:Questo documento è stato redatto solo come guida. I dati e le conclusioni sviluppati nel presente catalogo sono indicative e nonimplicano nessuna responsabilità da parte di Polypipe. L’utente deve usare le informazioni a propria discrezione.
Le informazioni contenute in questo catalogo non possono essere riprodotte senza l’autorizzazione di Polypipe. Tutti i contenuti sono forniti in buona fede, ma non implicano nessun impegno da parte di Polypipe. Polypipe si riserva il diritto di apportare modifiche senza preavviso. Tutte le transazioni sono soggette alle nostre Condizioni Generali di Vendita.
e sono marchi registrati da Polypipe. Tutti i prodotti Polypipe sono protetti dal Design Right under CDPA 1988. Copyright © 2014 Polypipe. Tutti i diritti riservati.
Thermo Plastic Pressure Pipe Systems
Polypipe Italia S.r.l.Loc. Pianmercato 5C-5D
16044 Monleone di Cicagna (GE)
Italy
Tel: +39 0185 92 399
Fax: +39 0185 92 699
www.polypipeitalia.com
www.polypipeitalia.com