THERMASHIELD POLYOLEFIN FOAM INSULATION

PHYSICALLY CROSS—LINKED

CLOSED CELL

POLYOLEFIN

INSULATION

POLYOLEFIN INSULATION

FEATURES

Page 2

THERMASHIELD the new advanced technology of physical cross linked polyolefin

foam insulation with its added irradiation process which increased the thermal

conductivity and enhance insulation properties. Thermashield proves as an All-in-

one insulation and its built in Acrylic Adhesive system that provides an easy

install feature in which other adhesives and supports are now unnecessary. The

fine ergonomics and advanced features make it a one of a kind material. In this

modern world today, all you need is a thermal shield, and its called ― THERMASHIELD‖

1. Easy to Install & Cost Efficient - Thermashield does not require any additional chemicals on the installation process.

2. Noise Reduction - Thermashield also has the ability to reduce noise. It

also acts as a sound insulation due to its closed-cell structure and an

excellent dampening of vibrations.

3. Fire Repellant - Thermashield gives a fully fire repellant body in which its chemical compound stops the spread of fire just within a second.

4. Fibre free - Does not emit fibres in installation or service.

5. CFC and HCFC FREE - Environment Friendly does not contain any CFCs, and HCFCs, which can damage the ozone in the atmosphere; As-

bestos free, and be classified as not classifiable as to carcinogenicity to

humans .

PRODUCT CHARACTERISTICS

Page 3

Thermashield is the original “All in One” flexible thermal insulation made from physically cross linked closed

cell polyolefin foam, factory fused to a reinforced 45micron aluminium foil and backed with a specially

developed acrylic tissue interlayer adhesive system. Designed for value and proven to perform, Thermashield

products offer outstanding thermal insulation properties and effective condensation control.

1. PHYSICALLY (Irradiation) Crosslinked – Engineered cell size

and density for outstanding thermal performance.

Thermal Conductivity – 0.032 W/mK (@21ᵒ C meant temp, 50-70% R.H)

Physical ( irradiation) cross linking utilises an electron beam process

that is clean and precise. Cell size affects thermal conductivity and

hence thermal performance. Thermashield insulation provides much

better thermal as well as physical properties than ordinary chemically

cross linked and elastomeric foams.

2. Negligible vapour permeability and water absorption for effective

condensation control.

Permeance : 3.3 X 10 -4 g/M.N.s

Permeability : 8.19 X10-15 Kg/Pa.s.m (0.029 mg.m/N.h)

Permeability Resistance Factor : μ> 20,000

Vapour diffusion into the insulation material is one of the major

causes of condensation. The subsequent spreading of water after

condensation can reduce the insulation capacity of a material by as

much as 50%. Due to its closed cell structure and additional alumi-

num foil facing, Thermashield is classified under British Standards, as a

vapour barrier itself. This ensures effective condensation prevention,

often associated with vapour permeability through the insulation, the

closed cell structure prevents absorption and stops the spread of wa-

ter.

3. Extensive Fire and Smoke testing.

All fire and smoke tests are certified by independent accredited

laboratories.

Thermashield™ insulation has been extensively tested to major

national and international standards, including Australian, British, UL,

American, European, and ISO Standards. Thermashield™ products

are also approved and listed by several national bodies such as PSB

( Singapore), HK Fire Services Bureau, as well as BOMBA ( Malaysia),

Dubai Municipality, Qatar Divil Defence and Bahrain Civil Defence.

Thermashield meets the NFPA 90A and NFPA 90B standards.

Page 4

4. Reinforced pure aluminium foil facing

Thermashield is supplied with factory applied reinforced aluminium

foil facing. The 45micron aluminum foil with the strong reinforcement

weave offers superior physical protection to the insulation.

No additional coatings or protection is required.

5. INNOVATIVE BUILT-IN ADHESSIVE SYSTEM

THERMASHIELD has made a breakthrough in polyolefin foam

insulation with its built-in adhesive system. Third party adhesives are

no longer needed for installing this product. It has an acrylic

substance at its back covered by a protective layer of paper. The

installers just have to peel the back cover and plot on surface. This

feature gives a perfect leveling of the insulation without the

unnecessary voids that we can hardly notice in ordinary foam

insulations. This affects the time and effort and gives a perfect finish

for the job.

6. Acrylic tissue adhesive system

The acrylic tissue interlayer adhesive system is designed to perform in

a variety of extreme conditions. The tissue interlayer system is

specially developed to ensure foolproof application. It is designed to

be re-positionable at the installation stage before permanently

curing to the steel duct. Unlike direct coated systems, this ensures

proper installation without damage to the insulation caused by

repeated alignment of the insulation to the duct.

7. Faster installation

The “All-in-One” system enables fast and easy installation thus

providing significant installation cost savings and a superior job finish.

No additional vapour barriers , coatings or mechanical fasteners are

required.

Page 5

MAIN APPLICATION

1. Wall and Roofing

Insulation

2. Pipe Insulation

3. Duct Insulation

4. Under-slab Insulation

5. Raised Floor Insulation

6. Tank Insulation

Page 6

PIPE INSULATION

A preformed closed cell physically crosslinked polyolefin foam tube insulation with

reinforced foil facing for steel and copper pipes.

PRODUCT DESCRIPTION

Complete closed cell, physically crosslinked foam pipe insulation

Heat bonded factory applied reinforced aluminum foil.

Pre-slit for faster installation

Flexible, tough and durable

Excellent compression resistance due to its crosslinked foam structure

Superior insulating properties compared to other flexible closed cell foams.

Very high vapour diffusion resistance Class 1 Vapour Retarder under ASHRAE

2009

No cladding required for internal application

Premium performance pipe insulation offering lower

installation costs and maximum energy savings

Page 7

SIZE AVAILABILITY

TECHNICAL DATA

Inch mm 15 20 25 38 50

½ 21.4 * * * * *

¾ 27.0 * * * * *

1 34.1 * * * * *

1 ¼ 42.9 * * * * *

1 ½ 48.4 * * * * *

2 60.3 * * * * *

2 ½ 73.0 * * * * *

3 88.9 * * * * *

3 ½ 101.6 * * * * *

4 114.3 * * * * *

5 141.3 * * * * *

6 168.3 * * * * *

7 193.7 * * * * *

8 219.1 * * * * *

9 244.5 * * * * *

10 273.1 * * * * *

12 323.9 * * * * *

14 355.6 * * * * *

16 381.0 * * * * *

18 406.4 * * * * *

Wall Thickness

IMC BUILDING #23 MANHATTAN ST., CUBAO, QUEZON CITY

WEBSITE: www.igros.asia

www.igrosmarketing.com

TEL NOS: (632) 410-3770 / 410-2988 / 411–4883

FAX NOS: (632) 414-8893/ 411-5870

EMAIL: imcs23@yahoo.com