The World Leader in Sheet Pile Connectors

The World Leader in Sheet Pile Connectors

PileProGroup.com

To place your order or for more information, dial toll-free nationwide: 866.666.7453 or +1.603.481.1881 or PileProGroup.comDelivery of the most typical connectors can be made to most US and EU destinations within 1 - 4 days.

O-Pile® in action

Innovation is the driving force behind our unique array of sheet pile products, which include:

· Patented PilePro® connectors

· O-Pile,® a versatile, efficient, and cost-effective steel-retaining wall/support system

· WADIT,® a proven interlock sealant

· iSheetPile,® an online, easy-to-use, yet sophisticated software program that gives the foundation construction industry the ability to professionally research sheet pile systems

Sold Thru Isheetpile LLC in North America:P.O. Box 591Holderness, NH 03245

T: 866.666.7453 or +1.603.481.1881F: 866.626.7453


The Leader in Innovative Sheet Pile Connectors

PilePro offers a line of modular sheet pile connectors that enable distributors to offer the end user an off-the-shelf and ready-to-install component. PilePro connectors effectively render fabricating corners and other connection processes in sheet piling projects a relic of the past.

Predictable, Quantifiable Retaining Wall System for All Soil Conditions

O-Pile is a dynamic, cost-effective contiguous pipe-to-pipe system that allows you to drive predictably into pure rock, if necessary, as well as dial-in your corrosion and bending moment needs separately. O-Pile is versatile and readily available, as you can use your local pipe plant or supply — no need to bring the majority of the steel from Luxembourg, anymore. Go to www.O-Pile.com to configure your system.

The Proven Sheet Pile Interlock Sealant

A purpose-built and globally proven sheet piling interlock sealant, WADIT (short for WASSERDICHT, German for waterproof) is an environmentally friendly sealant that was developed to deliver robust water-stopping protection. WADIT is available for use anywhere with any type of SSP systems, including Z sheet piles, O-Pile, and combined SSP.

The Only Online Comparative Marketplace for Sheet Pile

iSheetPile is a groundbreaking online tool compare and/or configure any readily available SSP systems in a given market via their bending moment capacity in order to get the most efficient use of steel for your application.


PilePro Quick Connector Guide

For AZ/Hoesch

ANY-Z®

V 20™

V 20 T™

V 20 TS™

For PZ/PZC

ANY-Z®

PZ 90®

PZ Tee®

PZT-S

Colt

Cobra

Joker®

Bullhead®

For Cold Formed

ANY-Z®

CF 90™

CF Tee™

For Z Sheet Pile

For AZ/Hoesch

V 20 weld-on™

For PZ/PZC

BBS-M/F

WOM®/WOF®

WOM-XL®/WOF-XL®

WOM-XXL®/WOF-XXL®

For Combined Sheet Pile

O-Pile: DTH

WOM-S®/WOF-S®

For Pipe to Pipe

WOM®/WOF®

WOM-XL®/WOF-XL®

WOM-XXL®/WOF-XXL®

For O-Pile


PilePro Quick Connector Guide

Less Expensive Weld On

SWC 30™

SWC 60™

SWC 90™

For PS31 & PS27.5

Long Lasting Connection

SWC 30A™

SWC 30B™

SWC 60A™

SWC 60B™

SWC 90A™

SWC 90B™

SWC 120™

Less Expensive Weld-On

SWC 30™

SWC 60™

SWC 90™

Flat Sheet Pile

120 Flat Sheet Pile

For Flat Sheet Pile

ANY-ZTruly a universal connector, ANY-Z is ideal for contractors who work with all types of sheet pile, including: AZ/Hoesch, PZ and PZC, and cold formed. ANY-Z offers most 2 way corner connections needed and creates endless corner, junction and transition pile configurations between different types of sheet pile.

V 20 TPerfect connector for the contractor who uses both AZ/ Hoesch type sheet pile, for reuse or permanent applications. Likely the only corner connector you’ll ever need, as it can do all types of two way corners and three way tee’s as well.

Connector Spotlight

V 20 T being used as an Omega connector.

V 20 T being used as a V 20 connector.

knock-out

this circle is at exactly 0,0with 0.25" radius

dimensions �exibility examples

Notes:

2014-09-09 : document created2014-09-10 : �rst omega-type examples roughed-in2014-09-22 : �xed incorrect angles (some were swapped) added �ex, example drawings for "Omega" con�gurations

lines, colors, �lls, etc:US/EU:Dimension text style

~~

Note, angle text style

angle label text style

n°

for knock-outs:Note, angle text style

V20T

�exibility (omega) examples (omega) examples (omega U-Pile)

90°

25°

35°

35° 25°

2.4"60mm

~~

0.8"20mm

~~

1.3"33mm

~~

35° 25°

60° 60°

60° 60°

25°

35°

35° 25°

knock-out


dimensions flexibility examples

Notes:

2014-09-09 : document created2014-09-10 : first omega-type examples roughed-in2014-09-22 : fixed incorrect angles (some were swapped) added flex, example drawings for "Omega" configurations2014-09-25 : added split-color on omega flex illustrations2014-10-02 : added split-color flex variation for v20-part of connector2014-12-18 : changed top interlock on flex to be claw instead of hook2014-12-18 : changed example for same "2014-12-31 : added new omega config

lines, colors, fills, etc:US/EU:Dimension text style

~~



n°


V20T

examples (omega) examples (omega U-Pile)

90°

25°

35°

35° 25°

2.4"60mm

~~

0.8"20mm

~~

1.3"33mm

~~

35° 25°

1To place your order or for more information, dial toll-free nationwide: 866.666.7453 or +1.603.481.1881 or PileProGroup.comDelivery of the most typical connectors can be made to most US and EU destinations within 1 - 4 days.

PilePro is the world’s only full line connector manufacturer for the steel sheet pile industry. PilePro manufactures corners and connectors for all type sof sheet pile used around the world. The connectors are made to highly stringent standards that form precise, seamless connections between steel sheet pile and other support systems, such as H-Beam, I-Beam and pipes/tubes as King piles.

These connectors are often modular in nature and come to the contractor or end user as a “ready-to-install” component. In addition to ready stock in our main markets, PilePro also offers specialty made-to-order connectors that form high value engineering solutions.

PilePro connectors have effectively rendered fabricating corners and other connection processes in steel piling construction projects a relic of the past. For today’s foundation and port construction projects, PilePro connectors give the design engineers, contractors and project owners a cost-effective, readily available engineered solution that increases efficiency, ease of installation, and increases the strength of their retaining system.

PilePro connectors are produced with the highest quality control standards. Every product utilizes advanced computer aided manufacturing technologies which are then measured again by hand prior to shipment. This process ensures that all dimensions are within precision tolerances to perfectly match the appropriate sheet piling section.

PilePro engineered connectors replace the antiquated process of cutting and welding sheet pile into different corner configurations.

In addition to having the highest quality control standards, PilePro connectors are rapidly emerging as the “go to” product in port, island, cofferdam and other construction projects around the world.

For updated technical data and current specifications, please see website: pilepro.com.

Reliable Less corrosion risk than fabrication: PilePro corner connectors offer a one-piece construction that does not rely on a single vertical weld seam. There is never a risk of “unzipping” at the corner or junction pile.

PilePro connectors are interlocked and attached to the sheet piling; thus, single unit integrity of the steel wall unit is always maintained.

Durability: PilePro corner connectors are stronger and more durable than other alternatives

FlexibleDesign: Precise engineering and superior design means PilePro connectors have greater flexibility within the interlock – typically a 20° to 30° of swing versus the 2° to 5° of swing found in most sheet pile interlocks.

Less expense: PilePro connectors provide superior cornering and connection solutions on a Customary Quick Delivery (CQD) basis through an efficient logistics network, products maybe delivered directly to the job site.

About PilePro®

This illustration of V 20 highlights the greater flexibility of PilePro

connectors; V 20 offers contractors a 2-way connection with angles up to 20° to 160.°


FastEasy transport: PilePro connectors are easily and efficiently transported with minimal risk of damage. Contrast that, with fabricated corners that cost more, weight more and are prone to handling damage.

No delay: PilePro connectors enable the user to immediately build sheet wall configurations without the traditional fabrication process.

Less inventory: Modular corners and connectors allow distributors and contractors to greatly lower their inventory, PilePro maintains a large stock of connectors that can be ordered on a CDQ basis in a wide range of angles and lengths, thus eliminating the need for large standing inventories.

PilePro connectors are easier to drive and extract so that construction time is reduced

About PilePro

Most PilePro products are available for quick turn-around delivery to your project site.Some restrictions apply.

Order must be received by 9am on previous day and delivery is next business day.

Application Examples

Joker

O-Pile

SWC 90 & SWC 120

CF Tee

V 20

PZ 90

AK: 5-15 daysHI: 14-28 days

Some restrictions apply.

1-4 Day Delivery


About PilePro

For Z Sheet Pile

THE DRIVING LINE: In the flexibility and system illustrations for each connector the DRIVING LINE is denoted in RED. Also, every single “hero” shot (the white image in the upper left corner) shows the connectors from left-to-right as they would appear in a driving line; the sheet-pile (or beam or pipe or...) comes in from the left, then the connector happens, then the driving line proceeds from there.


For AZ/Hoesch

DimensionsFlexibility

ANY-Z®

For additional details and CAD files visit pilepro.com/anyz

WORKS WITH: AZ 12-770, AZ 13, AZ 13-770, AZ 14-770, AZ 17, AZ 17-700, AZ 18, AZ 18-700, AZ 19, AZ 19-700, AZ 24-700, AZ 25, AZ 26, AZ 26-700, AZ 28, AZ 28-700, AZ 36-700N, AZ 38-700N, AZ 40-700N, AZ 42-700N, AZ 44-700N, AZ 46, AZ 46-700N, AZ 48, AZ 50, EZ80, EZ88, EZ95, H 1807, H 2507, H 2607, H 2707, H 2807, H 3907, MSZ18 312, MSZ18 340, MSZ18 350, MSZ18 375, MSZ18 406, MSZ19 340, MSZ19 350, MSZ19 375, MSZ19 406, PZ 22, PZ 27, PZ 35, PZ 40, PZC 13, PZC 14, PZC 18, PZC 19, PZC 25, PZC 26, PZC 28, SKZ 20, SKZ 22, SKZ 23, SKZ 24, SKZ 25, SKZ 31, SKZ 33, SKZ 34, SKZ 36, SKZ 38, XZ100, XZ105, XZ85, XZ90, XZ95

WEIGHT: ~ 14.6 lb/ft ~ 21.7 kg/m

TYPICAL STEEL GRADE: ASTM A572 Gr. 50/S355GP or higher.

USES:

• 2-way connections with angles up to 20°-160° for AZ/Hoesch, PZ/PZC, PZC 37, PZC 39, PZC 41 and most Cold Formed

• Also transitions any combination of the above mentioned sheet piles

knock-out



Notes:

2014-09-22 : document created2014-12-18 : changed one hook in flex, example to claw, as per v20


~~



n°


ANY-Z

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°

knock-out



Notes:



~~



n°


ANY-Z

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°

knock-out



Notes:



~~



n°


ANY-Z

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°

knock-out



Notes:



~~



n°


ANY-Z

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°


For AZ/Hoesch

ANY-Z(continued)

knock-out



Notes:



~~



n°


ANY-Z

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°

knock-out



Notes:



~~



n°


ANY-Z

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°


For AZ/Hoesch


PilePro.com 6To place your order or for more information, dial toll-free nationwide: (866) 666.7453 ext. 1 or +1-512-243-1228 or sales @pilepro.comDelivery of the most typical corner piles can be made to most US and EU destinations within 2 - 4 days.

For AZ/Hoesch


For additional details and CAD files visit pilepro.com/v20

WORKS WITH: AZ 12-770, AZ 13, AZ 13-770, AZ 14-770, AZ 17, AZ 17-700, AZ 18, AZ 18-700, AZ 19, AZ 19-700, AZ 24-700, AZ 25, AZ 26, AZ 26-700, AZ 28, AZ 28-700, AZ 36-700N, AZ 38-700N, AZ 40-700N, AZ 42-700N, AZ 44-700N, AZ 46, AZ 46-700N, AZ 48, AZ 50, EZ80, EZ88, EZ95, H 1807, H 2507, H 2607, H 2707, H 2807, H 3907, MSZ18 312, MSZ18 340, MSZ18 350, MSZ18 375, MSZ18 406, MSZ19 340, MSZ19 350, MSZ19 375, MSZ19 406, SKZ 20, SKZ 22, SKZ 23, SKZ 24, SKZ 25, SKZ 31, SKZ 33, SKZ 34, SKZ 36, SKZ 38, XZ100, XZ105, XZ85, XZ90, XZ95

WEIGHT: ~ 8.9 lb/ft ~13.2 kg/m

TYPICAL STEEL GRADES: ASTM Grade 50/60, ASTM A690 MARINER® steel Other steel grades available upon request.

USE:

• 2-way connections with angles up to 20°-160° for AZ/Hoesch, PZ/PZC and most Cold Formed.

V 20™

knock-out



Notes:

2014-09-08 : document created2014-09-22 : �xed incorrect angles (one was swapped)


~~



n°


V20

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°

knock-out



Notes:



~~



n°


V20

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°

knock-out



Notes:



~~



n°


V20

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°

knock-out



Notes:



~~



n°


V20

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°

For additional details and CAD files visit pilepro.com/v20


WEIGHT: ~ 8.9 lb/ft


USE:

• 2-way connections with angles up to 20°-160° for AZ/Hoesch and most Cold Formed.

knock-out



Notes:

2014-09-08 : document created2014-09-22 : fixed incorrect angles (one was swapped)2014-12-18 : changed top interlock on flex to be claw instead of hook2014-12-18 : changed example for same "


~~



n°


V20

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°

knock-out



Notes:



~~



n°


V20

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°

knock-out



Notes:



~~



n°


V20

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°

V 20™


For AZ/Hoesch

Dimensions

knock-out



Notes:

2014-09-09 : document created2014-09-10 : first omega-type examples roughed-in2014-09-22 : fixed incorrect angles (some were swapped) added flex, example drawings for "Omega" configurations2014-09-25 : added split-color on omega flex illustrations2014-10-02 : added split-color flex variation for v20-part of connector2014-12-18 : changed top interlock on flex to be claw instead of hook2014-12-18 : changed example for same "2014-12-31 : added new omega config


~~



n°


V20T

examples (omega) examples (omega U-Pile)

90°

25°

35°

35° 25°

2.4"60mm

~~

0.8"20mm

~~

1.3"33mm

~~

35° 25°

Flexibility

For additional details and CAD files visit pilepro.com/v20_t


WEIGHT: ~ 12.2 lb/ft


USES:

• 2-way connections with angles up to 20°-160° for AZ/Hoesch and most Cold Formed

• Omega corner

• 3-way flexible connections with direction changing

NOTE: PRODUCT COVERS 90% OF AZ/HOESCH CONNECTOR NEEDS

V 20 T™

knock-out



Notes:

2014-09-09 : document created2014-09-10 : first omega-type examples roughed-in2014-09-22 : fixed incorrect angles (some were swapped) added flex, example drawings for "Omega" configurations2014-09-25 : added split-color on omega flex illustrations2014-10-02 : added split-color flex variation for v20-part of connector2014-12-18 : changed top interlock on flex to be claw instead of hook2014-12-18 : changed example for same "


~~



n°


V20T

flexibility (omega) examples (omega) examples (omega U-Pile)

90°

25°

35°

35° 25°

2.4"60mm

~~

0.8"20mm

~~

1.3"33mm

~~

35° 25°

60° 60°

60° 60°

25°

35°

35° 25°

knock-out



Notes:



~~



n°


V20T


90°

25°

35°

35° 25°

2.4"60mm

~~

0.8"20mm

~~

1.3"33mm

~~

35° 25°

60° 60°

60° 60°

25°

35°

35° 25°

knock-out



Notes:



~~



n°


V20T


90°

25°

35°

35° 25°

2.4"60mm

~~

0.8"20mm

~~

1.3"33mm

~~

35° 25°

60° 60°

60° 60°

25°

35°

35° 25°

knock-out

this circle is at exactly 0,0w

ith 0.25" radius

dimensions

flexibilityexam

ples

Notes:

2014-09-09 : document created

2014-09-10 : first omega-type exam

ples roughed-in2014-09-22 : fixed incorrect angles (som

e were sw

apped) added flex, exam

ple drawings for "O

mega" configurations

2014-09-25 : added split-color on omega flex illustrations

2014-10-02 : added split-color flex variation for v20-part of connector2014-12-18 : changed top interlock on flex to be claw

instead of hook2014-12-18 : changed exam

ple for same "

2014-12-31 : added new om

ega config

lines, colors, fills, etc:U

S/EU:

Dim

ension text style

~~


angle lab

el text style

n°

for knock-outs:N

ote, angle text style

V20T

examples (om

ega)exam

ples (omega U

-Pile)

90°

25°

35°

35°25°

2.4"60m

m~~

0.8"20m

m~~

1.3"33m

m~~

35°25°


For AZ/Hoesch


PilePro.com 9To place your order or for more information, dial toll-free nationwide: (866) 666.7453 ext. 1 or +1-512-243-1228 or sales @pilepro.comDelivery of the most typical corner piles can be made to most US and EU destinations within 2 - 4 days.

For AZ/Hoesch


For additional details and CAD files visit pilepro.com/v20ts



TYPICAL STEEL GRADES: ASTM A572 Gr. 50/60 ASTM A690 Other steel grades available upon request.

USES:

• 2-way connections with angles up to 20°-160° for AZ/Hoesch, PZ/PZC and most Cold Formed


V 20 TS

knock-out



Notes:

2014-09-09 : document created2014-09-22 : �xed incorrect angles (one was swapped, one pivoted)


~~



n°


V20TS

2.4"60mm

~~

0.8"20mm

~~

1.6"42mm

~~

2.1"55mm

~~

25°

35°

25°

35°

90°

25°35°

knock-out



Notes:



~~



n°


V20TS

2.4"60mm

~~

0.8"20mm

~~

1.6"42mm

~~

2.1"55mm

~~

25°

35°

25°

35°

90°

25°35°

knock-out



Notes:



~~



n°


V20TS

2.4"60mm

~~

0.8"20mm

~~

1.6"42mm

~~

2.1"55mm

~~

25°

35°

25°

35°

90°

25°35°

knock-out



Notes:



~~



n°


V20TS

2.4"60mm

~~

0.8"20mm

~~

1.6"42mm

~~

2.1"55mm

~~

25°

35°

25°

35°

90°

25°35°

For additional details and CAD files visit pilepro.com/v20_ts


WEIGHT: ~ 14.7 lb/ft


USES:

• 2-way connections with angles up to 20°-160° for AZ/Hoesch and most Cold Formed


V 20 TS™

knock-out



Notes:

2014-09-09 : document created2014-09-22 : fixed incorrect angles (one was swapped, one pivoted)2014-12-18 : changed top interlock on flex to be claw instead of hook2014-12-18 : changed example for same "


~~



n°


V20TS

2.4"60mm

~~

0.8"20mm

~~

1.6"42mm

~~

2.1"55mm

~~

25°

35°

25°

35°

90°

25°35°

knock-out



Notes:



~~



n°


V20TS

2.4"60mm

~~

0.8"20mm

~~

1.6"42mm

~~

2.1"55mm

~~

25°

35°

25°

35°

90°

25°35°

knock-out



Notes:



~~



n°


V20TS

2.4"60mm

~~

0.8"20mm

~~

1.6"42mm

~~

2.1"55mm

~~

25°

35°

25°

35°

90°

25°35°


For PZ/PZC


90°90°

90° 90°

90°

90°

No pair for Any-z

{ { { {paired spread




ANY-Z®

For additional details and CAD files visit pilepro.com/anyz

USES:

• 2-way connections with angles up to 20°-160° for AZ/Hoesch, PZ/PZC, PZC 37, PZC 39, PZC 41 and most Cold Formed

• Also transitions any combination of the above mentioned sheet piles

knock-out



Notes:



~~



n°


ANY-Z

90°

±20°

±20°

2.2"55mm

1.4"36mm

~~

~~

knock-out



Notes:



~~



n°


ANY-Z

90°

±20°

±20°

2.2"55mm

1.4"36mm

~~

~~

knock-out



Notes:



~~



n°


ANY-Z

90°

±20°

±20°

2.2"55mm

1.4"36mm

~~

~~

knock-out



Notes:



~~



n°


ANY-Z

90°

±20°

±20°

2.2"55mm

1.4"36mm

~~

~~


For PZ/PZC

For additional details: pilepro.com/anyz

Any-Z®

ANY-Z(continued)

knock-out



Notes:



~~



n°


ANY-Z

90°

1.9"60mm

~~

0.8"20mm

~~ 25°

35°

25°35°


For PZ/PZC


For additional details and CAD files visit pilepro.com/pz90

WORKS WITH: PZ 22, PZ 27, PZ 35, PZ 40, PZC 13, PZC 14, PZC 18, PZC 19, PZC 25, PZC 26, PZC 28, PZC 37, PZC 39, PZC 41



USE:

• 2-way connections with angles up to 50°-130°

PZ 90®

knock-out



Notes:



~~



n°


PZ90

90°

±20°

±20°

workingpoint

0.6"14mm

1.7"44mm

0.6"14mm

~~

~~

~~knock-out



Notes:



~~



n°


PZ90

90°

±20°

±20°

workingpoint

0.6"14mm

1.7"44mm

0.6"14mm

~~

~~

~~

knock-out



Notes:



~~



n°


PZ90

90°

±20°

±20°

workingpoint

0.6"14mm

1.7"44mm

0.6"14mm

~~

~~

~~

knock-out



Notes:



~~



n°


PZ90

90°

±20°

±20°

workingpoint

0.6"14mm

1.7"44mm

0.6"14mm

~~

~~

~~


For PZ/PZC


For additional details and CAD files visit pilepro.com/pztee




USES:


• 3-way connection with (+/- 40° flexibility)

• 4-way connection with 2 PZ Tee connectors

PZ Tee®

knock-out



Notes:



~~



n°


PZ Tee

±20°

±20°

90°90°

workingpoint

0.6"14mm

1.7"43mm

0.6"14mm

1.0"26mm

±20°

~~ ~~~~

~~

knock-out



Notes:



~~



n°


PZ Tee

±20°

±20°

90°90°

workingpoint

0.6"14mm

1.7"43mm

0.6"14mm

1.0"26mm

±20°

~~ ~~~~

~~

knock-out



Notes:



~~



n°


PZ Tee

±20°

±20°

90°90°

workingpoint

0.6"14mm

1.7"43mm

0.6"14mm

1.0"26mm

±20°

~~ ~~~~

~~

knock-out



Notes:



~~



n°


PZ Tee

±20°

±20°

90°90°

workingpoint

0.6"14mm

1.7"43mm

0.6"14mm

1.0"26mm

±20°

~~ ~~~~

~~


For PZ/PZC


For additional details and CAD files visit pilepro.com/pzts




USES:


• 3-way connection with (+/- 40° flexibility)

PZT-S

knock-out



Notes:



~~



n°


PZTS

±20°

±20°

±20°

90°90°

1.3"32mm

1.6"40mm

~~

~~knock-out



Notes:



~~



n°


PZTS

±20°

±20°

±20°

90°90°

1.3"32mm

1.6"40mm

~~

~~

knock-out



Notes:



~~



n°


PZTS

±20°

±20°

±20°

90°90°

1.3"32mm

1.6"40mm

~~

~~

knock-out



Notes:



~~



n°


PZTS

±20°

±20°

±20°

90°90°

1.3"32mm

1.6"40mm

~~

~~


For PZ/PZC


For additional details and CAD files visit pilepro.com/colt




USE:

• 2-way connection offering 45° corners with a flex from 95° to 175°

Colt

knock-out



Notes:



~~



n°


Colt

0.8"21mm

workingpoint

1.5"38mm

2.1"53mm

0.7"17mm

±20°

±20°

45°

~~ ~~

~~

~~

knock-out



Notes:



~~



n°


Colt

0.8"21mm

workingpoint

1.5"38mm

2.1"53mm

0.7"17mm

±20°

±20°

45°

~~ ~~

~~

~~

knock-out



Notes:



~~



n°


Colt

0.8"21mm

workingpoint

1.5"38mm

2.1"53mm

0.7"17mm

±20°

±20°

45°

~~ ~~

~~

~~

knock-out



Notes:



~~



n°


Colt

0.8"21mm

workingpoint

1.5"38mm

2.1"53mm

0.7"17mm

±20°

±20°

45°

~~ ~~

~~

~~


For PZ/PZC


For additional details and CAD files visit pilepro.com/cobra




USE:

• 2-way connection offering 135° corners with a flex from 5° to 85°

Cobra

knock-out



Notes:



~~



n°


Cobra

135°

±20°

±20°

workingpoint

1.9"49mm

2.7"70mm

1.9"48mm

~~

~~

~~

knock-out



Notes:



~~



n°


Cobra

135°

±20°

±20°

workingpoint

1.9"49mm

2.7"70mm

1.9"48mm

~~

~~

~~

knock-out



Notes:



~~



n°


Cobra

135°

±20°

±20°

workingpoint

1.9"49mm

2.7"70mm

1.9"48mm

~~

~~

~~

knock-out



Notes:



~~



n°


Cobra

135°

±20°

±20°

workingpoint

1.9"49mm

2.7"70mm

1.9"48mm

~~

~~

~~


For PZ/PZC


For additional details and CAD files visit pilepro.com/joker




USES:

• 3-way “T” connection

• 90° connection with angles up to 50°-130°

Joker®

knock-out



Notes:



~~



n°


Joker

±20°

±20°

±20°

1.1"29mm

1.3"32mm

0.6"15mm

workingpoint

90°90°

~~

~~

~~

knock-out



Notes:



~~



n°


Joker

±20°

±20°

±20°

1.1"29mm

1.3"32mm

0.6"15mm

workingpoint

90°90°

~~

~~

~~

knock-out



Notes:



~~



n°


Joker

±20°

±20°

±20°

1.1"29mm

1.3"32mm

0.6"15mm

workingpoint

90°90°

~~

~~

~~

knock-out



Notes:



~~



n°


Joker

±20°

±20°

±20°

1.1"29mm

1.3"32mm

0.6"15mm

workingpoint

90°90°

~~

~~

~~


For PZ/PZC


For additional details and CAD files visit pilepro.com/bullhead




Uses:

• 3-way “T” connection

• 90° connection with angles up to 50°-130°

Bullhead®

knock-out



Notes:



~~



n°


Bullead

90°

90°

20° 10°

±20°

1.7"44mm

~~ 3.5"88mm

~~

0.6"14mm

~~ 0.6"14mm

~~

workingpoint

20° 10°

knock-out



Notes:



~~



n°


Bullead

90°

90°

20° 10°

±20°

1.7"44mm

~~ 3.5"88mm

~~

0.6"14mm

~~ 0.6"14mm

~~

workingpoint

20° 10°

knock-out



Notes:



~~



n°


Bullead

90°

90°

20° 10°

±20°

1.7"44mm

~~ 3.5"88mm

~~

0.6"14mm

~~ 0.6"14mm

~~

workingpoint

20° 10°

knock-out



Notes:



~~



n°


Bullead

90°

90°

20° 10°

±20°

1.7"44mm

~~ 3.5"88mm

~~

0.6"14mm

~~ 0.6"14mm

~~

workingpoint

20° 10°


For Cold Formed

Dimensions Flexibility

WORKS WITH: AZ 12-770, AZ 13, AZ 13-770, AZ 14-770, AZ 17, AZ 17-700, AZ 18, AZ 18-700, AZ 19, AZ 19-700, AZ 24-700, AZ 25, AZ 26, AZ 26-700, AZ 28, AZ 28-700, AZ 36-700N, AZ 38-700N, AZ 40-700N, AZ 42-700N, AZ 44-700N, AZ 46, AZ 46-700N, AZ 48, AZ 50, EZ80, EZ88, EZ95, H 1807, H 2507, H 2607, H 2707, H 2807, H 3907, MSZ18 312, MSZ18 340, MSZ18 350, MSZ18 375, MSZ18 406, MSZ19 340, MSZ19 350, MSZ19 375, MSZ19 406, PZ 22, PZ 27, PZ 35, PZ 40, PZC 13, PZC 14, PZC 18, PZC 19, PZC 25, PZC 26, PZC 28, SKZ 20, SKZ 22, SKZ 23, SKZ 24, SKZ 25, SKZ 31, SKZ 33, SKZ 34, SKZ 36, SKZ 38, XZ100, XZ105, XZ85, XZ90, XZ95, PZC 37, PZC 39, PZC 41



USES:

• 2-way connections with angles up to 20°-160° for AZ/Hoesch, PZ/PZC and most Cold Formed


ANY-Z®

For additional details and “works with” list, visit pilepro.com/anyz

knock-out



Notes:

2014-10-03 : document created2014-10-06 : dims and �ex changed to re�ect mandatory starting angle (ala V20 drawings for CF)


~~



n°


ANY-Z

varies by sheet

varies by sheet

90°

5° - 10°necessary

~~

varies by sheet

5° - 10°necessary

~~varies by sheet

knock-out



Notes:



~~



n°


ANY-Z

varies by sheet

varies by sheet

90°

5° - 10°necessary

~~

varies by sheet

5° - 10°necessary

~~varies by sheet

knock-out



Notes:



~~



n°


ANY-Z

varies by sheet

varies by sheet

90°

5° - 10°necessary

~~

varies by sheet

5° - 10°necessary

~~varies by sheet

knock-out



Notes:



~~



n°


ANY-Z

varies by sheet

varies by sheet

90°

5° - 10°necessary

~~

varies by sheet

5° - 10°necessary

~~varies by sheet


For Cold Formed

ANY-Z(continued)

knock-out



Notes:



~~



n°


ANY-Z

varies by sheet

varies by sheet

90°

5° - 10°necessary

~~

varies by sheet

5° - 10°necessary

~~varies by sheet

knock-out



Notes:



~~



n°


ANY-Z

varies by sheet

varies by sheet

90°

5° - 10°necessary

~~

varies by sheet

5° - 10°necessary

~~varies by sheet


For Cold Formed

Dimensions

For additional details and CAD files visit pilepro.com/cfc90

WORKS WITH: EZ80, EZ88, EZ95, JZ112, MSZ18 312, MSZ18 340, MSZ18 350, MSZ18 375, MSZ18 406, MSZ19 340, MSZ19 350, MSZ19 375, MSZ19 406, PAZ-CF 4460, PAZ-CF 4470, PAZ-CF 5460, PAZ-CF 5470, PAZ-CF 5480, PAZ-CF 5560, PAZ-CF 5570, PAZ-CF 5580, SCZ 14, SCZ 16, SCZ 17, SCZ 18, SCZ 19, SCZ 21, SCZ 22, SCZ 23, SCZ 25, SCZ 26, SCZ 29, SCZ 30, SKZ 20, SKZ 22, SKZ 23, SKZ 24, SKZ 25, SKZ 31, SKZ 33, SKZ 34, SKZ 36, SKZ 38, XZ100, XZ105, XZ85, XZ90, XZ95, Z 55, Z 60, Z 65, Z 70, Z 75



USE:

• 2-way connections with angles up to 20°-160° for most Cold Formed shapes

CF 90™

1.1"28mm

~~

2.2"56mm

~~

2.2—2.7"55—68mm

~~

0.4—1.0"10—24mm

~~

1.9"47mm

~~

1.7"43mm

~~ 1.7"43mm

~~1.7"44mm

~~ 1.7"44mm

~~

1.1"28mm

~~

2.2"56mm

~~

3.1"79mm

~~

2.2—2.6"55—66mm

~~

2.2—2.6"55—66mm

~~90°

90°90°

90°

CFC90 Large CFT Large CF Large

90°

90°


For Cold Formed

Dimensions

For additional details and CAD files visit pilepro.com/cft

FITS: EZ80, EZ88, EZ95, JZ112, MSZ18 312, MSZ18 340, MSZ18 350, MSZ18 375, MSZ18 406, MSZ19 340, MSZ19 350, MSZ19 375, MSZ19 406, PAZ-CF 4460, PAZ-CF 4470, PAZ-CF 5460, PAZ-CF 5470, PAZ-CF 5480, PAZ-CF 5560, PAZ-CF 5570, PAZ-CF 5580, SCZ 14, SCZ 16, SCZ 17, SCZ 18, SCZ 19, SCZ 21, SCZ 22, SCZ 23, SCZ 25, SCZ 26, SCZ 29, SCZ 30, SKZ 20, SKZ 22, SKZ 23, SKZ 24, SKZ 25, SKZ 31, SKZ 33, SKZ 34, SKZ 36, SKZ 38, XZ100, XZ105, XZ85, XZ90, XZ95, Z 55, Z 60, Z 65, Z 70, Z 75



USES:

• 3-way T-connection

• 90° connection with angles up to 20°-160° for most Cold Formed shapes

CF Tee™

1.1"28mm

~~

2.2"56mm

~~

2.2—2.7"55—68mm

~~

0.4—1.0"10—24mm

~~

1.9"47mm

~~

1.7"43mm

~~ 1.7"43mm

~~1.7"44mm

~~ 1.7"44mm

~~

1.1"28mm

~~

2.2"56mm

~~

3.1"79mm

~~

2.2—2.6"55—66mm

~~

2.2—2.6"55—66mm

~~

90°90°

90°

90°

CFC90 Large CFT Large CF Large

90°

90°


For Combined Sheet Pile



Flexibility Dimensions

knock-out



Notes:


lines, colors, fills, etc:JP:Dimension text style

~~



n°


V20 weld-on

Interlock distancesdepend on sheet-pile

77mm~~

a

b

50°

10°

V 20 weld-on™

For additional details and “works with” list, visit pilepro.com/v20_weldon

USE:

• For increased rotational flexibility with a Larssen connection to pipe

WORKS WITH: Pipe AZ 12-770, AZ 13, AZ 13-770, AZ 14-770, AZ 17, AZ 17-700, AZ 18, AZ 18-700, AZ 19, AZ 19-700, AZ 24-700, AZ 25, AZ 26, AZ 26-700, AZ 28, AZ 28-700, AZ 36-700N, AZ 38-700N, AZ 40-700N, AZ 42-700N, AZ 44-700N, AZ 46, AZ 46-700N, AZ 48, AZ 50, EZ80, EZ88, EZ95, H 1807, H 2507, H 2607, H 2707, H 2807, H 3907, MSZ18 312, MSZ18 340, MSZ18 350, MSZ18 375, MSZ18 406, MSZ19 340, MSZ19 350, MSZ19 375, MSZ19 406, SKZ 20, SKZ 22, SKZ 23, SKZ 24, SKZ 25, SKZ 31, SKZ 33, SKZ 34, SKZ 36, SKZ 38, XZ100, XZ105, XZ85, XZ90, XZ95

WEIGHT: ~ 8.9 lb/ft


For Combined Sheet Piles: Pipe + AZ/Hoesch

knock-out



Notes:


lines, colors, fills, etc:JP:Dimension text style

~~



n°


V20 weld-on


77mm~~

a

b

50°

10°

knock-out



Notes:



~~



n°


V20 weld-on


77mm~~

a

b

c

d

knock-out



Notes:



~~



n°


V20 weld-on


77mm~~

a

b

c

d


Dimensions

Flexibility

For Combined Sheet Piles: Beam + PZ/PZC

For additional details and CAD files visit pilepro.com/bbsm or pilepro.com/bbsf

FITS: PZ 22, PZ 27, PZ 35, PZ 40, PZC 13, PZC 14, PZC 18, PZC 19, PZC 25, PZC 26, PZC 28 PZC 37, PZC 39, PZC 41


USE:

• For combined sheet pile walls using wide-flanged shapes.

NOTE: WELD-ON BOTH SIDES OFFERS SECURE CONNECTION, WHILE INCREASING STRENGTH AND CORROSION RESISTANCE

BBS-M/F

knock-out



Notes:

2014-09-25 : document created2014-10-02 : replaced BBS with 2-leg version2014-12-18 : changed text w/r/t variable distance, broke flex into two pieces


~~



n°


BBS

±20°±20°

1.2"30mm

~~0.8"20mm

~~

variablewith

beam

knock-out



Notes:



~~



n°


BBS

±20°±20°

1.2"30mm

~~0.8"20mm

~~

variablewith

beam

knock-out



Notes:



~~



n°


BBS

±20°±20°

1.2"30mm

~~0.8"20mm

~~

variablewith

beam

knock-out



Notes:



~~



n°


BBS

±20°±20°

1.2"30mm

~~0.8"20mm

~~

variablewith

beam

knock-out



Notes:



~~



n°


BBS

±20°±20°

1.2"30mm

~~0.8"20mm

~~

variablewith

beam




For additional details and CAD files visit pilepro.com/wom or pilepro.com/wof

FITS: PZ/PZC, pipe


WOM WEIGHT: ~ 4.4 lb/ft ~ 6.5 kg/m

WOF WEIGHT: ~ 5.6 lb/ft ~ 8.3 kg/m


USE:

* Uncoupled WOM/WOF are used to create combi-wall systems using PZ or PZC.

Combined Width � 62 mm (2.4")

Connector Thicknes � 10 mm (.39")

WOM®/WOF®

knock-out


dimensions exibility examples

Notes:


lines, colors, s, etc:US/EU:Dimension text style

~~



n°


WOM / WOF

±20°

±20°

1.0"26mm

~~ 1.4"36mm

~~

2.4"62mm

~~

knock-out



Notes:



~~



n°


WOM / WOF

±20°

±20°

1.0"26mm

~~ 1.4"36mm

~~

2.4"62mm

~~

knock-out



Notes:



~~



n°


WOM / WOF

±20°

±20°

1.0"26mm

~~ 1.4"36mm

~~

2.4"62mm

~~

knock-out



Notes:



~~



n°


WOM / WOF

±20°

±20°

1.0"26mm

~~ 1.4"36mm

~~

2.4"62mm

~~

knock-out



Notes:



~~



n°


WOM / WOF

±20°

±20°

1.0"26mm

~~ 1.4"36mm

~~

2.4"62mm

~~




For additional details and CAD files visit pilepro.com/womxl or pilepro.com/wofxl

FITS: PZ/PZC, pipe


WOM XL WEIGHT: ~ 8.5 lb/ft ~ 12.7 kg/m

WOF XL WEIGHT: ~ 12.0 lb/ft ~ 17.8 kg/m


USE:

• Uncoupled WOM-XL/WOF-XL are used to create combi-wall systems using PZ or PZC.


Connector Thicknes � 12 mm (.47") Also available in 10 mm (.39")

WOM-XL®/WOF-XL®

knock-out



Notes:

2014-09-25 : document created2014-10-06 : pipe-to-pipe example added


~~



n°


WOM-XL / WOF-XL

±20°

±20°

3.5"88mm

~~ 3.6"92mm

~~

knock-out



Notes:



~~



n°


WOM-XL / WOF-XL

±20°

±20°

3.5"88mm

~~ 3.6"92mm

~~knock-out



Notes:



~~



n°


WOM-XL / WOF-XL

±20°

±20°

3.5"88mm

~~ 3.6"92mm

~~

knock-out



Notes:



~~



n°


WOM-XL / WOF-XL

±20°

±20°

3.5"88mm

~~ 3.6"92mm

~~

knock-out



Notes:



~~



n°


WOM-XL / WOF-XL

±20°

±20°

3.5"88mm

~~ 3.6"92mm

~~

knock-out



Notes:



~~



n°


WOM-XL / WOF-XL

±20°

±20°

3.5"88mm

~~ 3.6"92mm

~~

knock-out



Notes:



~~



n°


WOM-XL / WOF-XL

±20°

±20°

3.5"88mm

~~ 3.6"92mm

~~




For additional details and CAD files visit pilepro.com/womxxl or pilepro.com/wofxxl

FITS: PZ/PZC, pipe


WOM-XXL WEIGHT: ~ 12.4 lb/ft ~ 18.5 kg/m

WOF-XXL WEIGHT: ~ 15.8 lb/ft ~ 23.5 kg/m


USE:

• Uncoupled WOM-XXL/WOF-XXL are used to create combi-wall systems using PZ or PZC.



WOM-XXL®/WOF-XXL®

knock-out



Notes:



~~



n°


WOM-XXL / WOF-XXL

±20°

±20°

5.8"148mm

~~ 6.0"152mm

~~knock-out



Notes:



~~



n°


WOM-XXL / WOF-XXL

±20°

±20°

5.8"148mm

~~ 6.0"152mm

~~

knock-out



Notes:



~~



n°


WOM-XXL / WOF-XXL

±20°

±20°

5.8"148mm

~~ 6.0"152mm

~~

knock-out



Notes:



~~



n°


WOM-XXL / WOF-XXL

±20°

±20°

5.8"148mm

~~ 6.0"152mm

~~

knock-out



Notes:



~~



n°


WOM-XXL / WOF-XXL

±20°

±20°

5.8"148mm

~~ 6.0"152mm

~~

knock-out



Notes:



~~



n°


WOM-XXL / WOF-XXL

±20°

±20°

5.8"148mm

~~ 6.0"152mm

~~


For O-Pile®




For O-Pile: DTH

For additional details and CAD files visit pilepro.com/woms or pilepro.com/wofs

FITS: Pipe

WOM-S WEIGHT: ~ 2.4 lb/ft ~ 3.8 kg/m

WOF-S WEIGHT: ~ 7.5 lb/ft ~ 11.2 kg/m


USE:

• For O-Pile and O-Pile: DTH systems using Down the Hole drilling; the only SSP systems that can be driven through solid rock.



Interlock Strength = 19.5 kips/inch (3418 kN/m)

WOM-S®/WOF-S®

knock-out



Notes:

2014-09-25 : document created2014-10-02 : replaced wom/wof with wom-s /wof-s, but name remains wom/wof2014-10-06 : added pipe-to-z-sheet drawing example


~~



n°


WOM / WOF

±20° ±20°

2.4"62mm

~~

±20°

knock-out



Notes:



~~



n°


WOM / WOF

±20° ±20°

2.4"62mm

~~

±20°

knock-out



Notes:



~~



n°


WOM / WOF

±20° ±20°

2.4"62mm

~~

±20°

knock-out



Notes:



~~



n°


WOM / WOF

±20° ±20°

2.4"62mm

~~

±20°



For O-Pile

For additional details and CAD files visit pilepro.com/wom or pilepro.com/wof

FITS: Pipe

WOM WEIGHT: ~ 4.4 lb/ft ~ 6.5 kg/m

WOF WEIGHT: ~ 5.6 lb/ft ~ 8.3 kg/m


USE:

• WOM/WOF are coupled together to create O-Pile systems.




WOM®/WOF®

knock-out



Notes:



~~



n°


WOM / WOF

2.4"62mm

~~ ±20°

knock-out



Notes:



~~



n°


WOM / WOF

2.4"62mm

~~ ±20°

knock-out



Notes:



~~



n°


WOM / WOF

2.4"62mm

~~ ±20°

knock-out



Notes:



~~



n°


WOM / WOF

2.4"62mm

~~ ±20°



For O-Pile

For additional details and CAD files visit pilepro.com/womxl or pilepro.com/wofxl

FITS: Pipe

WOM-XL WEIGHT: ~ 8.5 lb/ft ~ 12.7 kg/m

WOF-XL WEIGHT: ~ 12.0 lb/ft ~ 17.8 kg/m


USE:

• WOM-XL/WOF-XL are coupled together to create O-Pile systems.




WOM-XL®/WOF-XL®

knock-out



Notes:


lines, colors, �lls, etc:JP:Dimension text style

~~



n°


WOM / WOF 180mm @9mm

±20°

180mm

9mm

knock-out



Notes:



~~



n°



±20°

180mm

9mm

knock-out



Notes:



~~



n°



±20°

180mm

9mm

knock-out



Notes:



~~



n°



±20°

180mm

9mm



For O-Pile

For additional details and CAD files visit pilepro.com/womxxl or pilepro.com/wofxxl

FITS: Pipe

WOM-XXL WEIGHT: ~ 12.4 lb/ft ~ 18.5 kg/m

WOF-XXL WEIGHT: ~ 15.8 lb/ft ~ 23.5 kg/m


USE:

• WOM-XXL/WOF-XXL are coupled together to create O-Pile systems.




WOM-XXL®/WOF-XXL®

knock-out



Notes:



~~



n°


WOM / WOF XXL @12mm

±20°

300mm

knock-out



Notes:



~~



n°


WOM / WOF XXL @12mm

±20°

300mm

knock-out



Notes:



~~



n°


WOM / WOF XXL @12mm

±20°

300mm

knock-out



Notes:



~~



n°


WOM / WOF XXL @12mm

±20°

300mm


About PilePro

For Flat Sheet Pile



30A 30B 60A 60B

90A 90Bswc

For Flat Sheet Pile


For additional details, visit pilepro.com/swc30a

WORKS WITH: PS 27.5, PS 31



USE:

• For 30° Y-connections, offers long lasting connection, due to the fact there is no structural weld

NOTE: DESIGN SHOWN MADE TO FIT PS31 AND PS27.5 (SIMILAR CONNECTORS AVAILABLE FOR OTHER FLAT SHEET PILE TYPES, PLEASE INQUIRE)

SWC 30A™

30°

30°

60°

60°90°

90°

115°

130°

115°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°


30A 30B 60A 60B

90A 90Bswc

For Flat Sheet Pile


For additional details, visit pilepro.com/swc30b




USE:



SWC 30B™

30°

30°

60°

60°90°

90°

115°

130°

115°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°


30A 30B 60A 60B

90A 90Bswc

For Flat Sheet Pile






USE:



SWC 60A™

30°

30°

60°

60°90°

90°

115°

130°

115°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°


30A 30B 60A 60B

90A 90Bswc

For Flat Sheet Pile






USE:



SWC 60B™

30°

30°

60°

60°90°

90°

115°

130°

115°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°


30A 30B 60A 60B

90A 90Bswc

For Flat Sheet Pile






USE:



SWC 90A™

30°

30°

60°

60°90°

90°

115°

130°

115°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°


30A 30B 60A 60B

90A 90Bswc

For Flat Sheet Pile






USE:



SWC 90B™

30°

30°

60°

60°90°

90°

115°

130°

115°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°


For Flat Sheet Pile


For additional details, visit pilepro.com/swc120


WEIGHT: ~ 38.29 lb/ft ~ XXXX


USE:

• For 120° Y-corners in circular cells, offers long lasting connection, due to the fact there is no structural weld


SWC 120™

knock-out



Notes:



~~



n°


SWC120

120°

120°

120°

1.9"49mm

~~

±10°

±10°

±10°

knock-out



Notes:



~~



n°


SWC120

120°

120°

120°

1.9"49mm

~~

±10°

±10°

±10°

knock-out



Notes:



~~



n°


SWC120

120°

120°

120°

1.9"49mm

~~

±10°

±10°

±10°

knock-out



Notes:



~~



n°


SWC120

120°

120°

120°

1.9"49mm

~~

±10°

±10°

±10°


For Flat Sheet Pile



FITS: Design shown made to fit PS 27.5 and PS 31 manufactured by Gerdau; for other sheet pile manufacturers, please inquire.



USE:

• For 30° connections, welding required


SWC 30™

115°

130°

115°

60°

30° 60°

2.1"54mm

~~

±10°

workingpoint

3.7"94mm

~~

4.2"108mm

~~

1.9"49mm

~~

±10°

workingpoint

1.1"28mm

~~

2.2"56mm

~~

30 60

2.1"54mm

~~

±10°

workingpoint

3.7"94mm

~~

4.2"108mm

~~

1.9"49mm

~~

±10°

workingpoint

1.1"28mm

~~

2.2"56mm

~~

30 60


For Flat Sheet Pile






USE:



SWC 60™

115°

130°

115°

60°

30° 60°

2.1"54mm

~~

±10°

workingpoint

3.7"94mm

~~

4.2"108mm

~~

1.9"49mm

~~

±10°

workingpoint

1.1"28mm

~~

2.2"56mm

~~

30 60

2.1"54mm

~~

±10°

workingpoint

3.7"94mm

~~

4.2"108mm

~~

1.9"49mm

~~

±10°

workingpoint

1.1"28mm

~~

2.2"56mm

~~

30 60


30A 30B 60A 60B

90A 90Bswc

For Flat Sheet Pile


For additional details, visit pilepro.com/swc




USE:



SWC 90™

30°

30°

60°

60°90°

90°

115°

130°

115°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°


For Flat Sheet Pile

Flexibility

For additional details, visit pilepro.com/120flat

30A 30B 60A 60B

90A 90Bswc




USE:

• For 120° Y-junction without a welded connection


120 Flat Sheet Pile

30°

30°

60°

60°90°

90°

115°

130°

115°

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

workingpoint

4.7"119mm

~~

4.0"102mm

~~2.2"56mm

~~

±10° ±10°

±10°

30A 30B 60A 60B

90A 90B swc

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

3.6"91mm

~~

2.9"74mm

~~

±10° ±10°

±10°

±10° ±10°

±10°

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

3.0"76mm

~~

2.9"74mm

~~

0.9"23mm

~~2.0"51mm

~~

4.0"102mm

~~

1.7"43mm

~~

6.5"164mm

~~1.9"49mm

~~

workingpoint 1.0"

24mm~~

1.9"49mm

~~

1.7"43mm

~~

±10°

1.6"40mm

~~

±10° ±10°

±10°


Installation Guides

For Z Sheet PileFor AZ/Hoesch

ANY-Z, V 20, V 20 T, V 20 TS

1. Please review the proper interlocking examples that are listed.2. Thread the connector into the interlock while the sheet pile is

out of the ground.3. Adjust the connector to the appropriate position.4. Tack or spot-weld the connector in place. Typically, a ~250mm

(~10") weld attaching the connector to the sheet pile to the top is sufficient.

5. Drive/extract the sheet pile (with the connector attached) as you would normally.

For PZ/PZC

ANY-Z, PZ 90, PZ Tee, PZT-S, Colt, Cobra, Joker, Bullhead



(~10”) weld attaching the connector to the sheet pile to the top is sufficient.


For Cold Formed

ANY-Z, CF 90, CF Tee





INTERLOCKING GUIDE

For Combined Sheet Pile BBS-M/F

1. The beams are delivered with the connectors already attached.2. First, install the king piles (beams) as you would in any

combined sheet pile wall application.3. Grasp the sheet piling and thread between the already installed beams.4. All welding seams are a minimum ~6mm (~0.25”).5. Both sides have a continuous minimum tip and toe welding

of ~500mm (~20").6. Both sides are tack welded in the free length between tip and

toe welding with ~200mm/m (~8"/yd). The distance from seam to seam is ~800mm (~31.5") or less.

7. In salt water, the water side is continuously welded on the whole pile length. Follow the instructions above for the reverse side of the pile, if it is not in contact with salt water.

V 20 weld-on, WOM/WOF, WOM-XL/WOF-XL, WOM-XXL/WOF-XXL

1. The pipes are delivered with the connectors already attached.2. First, install the king piles (pipes) as you would in any

combined sheet pile wall application. 3. Grasp the sheet piling and thread between the already

installed pipe piles.4. Increase flexibility in the middle interlocks of the sheet piles,

combined with the swing of the connectors, to enable easier threading of the intermediate sheet piling.

5. All welding seams are a minimum ~6mm (~0.25").6. Both sides have a continuous minimum tip and toe welding of

~500mm (~20").7. Both sides are tack welded in the free length between tip and

toe welding with 200mm/m (8"/yd). The distance from seam to seam is ~800mm (~31.5") or less.

8. In salt water, the water side is continuously welded on the whole pile length. Follow the instructions above for the reverse side of the pile, if it is not in contact with salt water.

For Flat Sheet PileFor All Flat Sheet Pile





INTERLOCKING GUIDE

GOOD BAD GOOD BAD

bns

cold

�at

larssen

pipe

GOOD BAD GOOD BAD

bns

cold

�at

larssen

pipe

Proper Use

GOOD BAD GOOD BAD

bns

cold

�at

larssen

pipe

Improper Use

GOOD BAD GOOD BAD

bns

cold

�at

larssen

pipe

GOOD BAD GOOD BAD

bns

cold

�at

larssen

pipe

Improper Use

Documents

The World Leader in Sheet Pile Connectors