A quality machine built with quality componentsand supported by a local qualified distributor. 1 888 209 4344

Affordable and simple with more standardfeatures than any other fully automaticoverhead (rotary tower) pallet wrapper.

We invite you to go online atwww.cousinspackaging.com for moreinformation or call your local distributor.

EXCLUSIVELY FROM

THE ULTRAModel 4100-35-FA Fully Automatic

Overhead (Rotary Arm) Series

Choose a frame that fits your production situation.

All frame styles include the easy to maintain clamp, cut and wipe device.ALL ELECTRIC…there is no need for installing air lines or noisy compressors.

Wall or Post Mount Rear Mount – Lag To Floor U Shaped Free-Standing3 leg – Free-Standing

For more information contact:1 888 209 4344 www.cousinspackaging.com

ULTRA DESIGN FEATURES/SPECIFICATIONS

CONTROLS:PANASONIC PLC with Touchscreen Operator InterfacePower Off – On – Reset switch & Power On indicator lightAuto Wrap Cycle Start/PauseCycle Pause for applying top sheetsReinforce Wrap control for mid-wrappingEmergency Stop buttonFilm tension (Force-to-Load) controlSeparate film carriage raise & lower speed controlsVariable rotary arm speed controlTriple beam automatic load height detection sensor for dark or shiny loadsSeparate 1 to 12 revolution top & bottom wrap controlSelectable Reduced Bottom Film Force parameter for wrapping bottom of loadA – B – C wrap program selector with capability to inputand store unique wrapping parameters for each programPendant start/stop push-button station for remote operator control –optional lanyard or wireless remote control availableStack-light beacon indicates run, clear or fault conditionsRotary arm and film carriage elevator dynamic brakingNEMA 12 control panel enclosure3 Year Warranty on Components

FILM CARRIAGE:Super Rapid Thread II ™ 20” capacity pre-stretch film carriageSafety Door with auto power cut-off switch Special Film Threading Device – Uniquely orientates the sticky sideof the film against the pre-stretch rollers and the inside on the load. 1/2 HP DC variable speed motor33% to 313% fixed stretch capabilityCarriage Descent Safety Shut-Off DeviceSuperior film-to-roller contact areaLifetime warranty on pre-stretch rollers

ARM/TOWER DESIGN:Double flange bearing support systemTwin V-belt drive pulleys with belt tensioner1-12 RPM rotational speed c/w soft start acceleration1/2 HP DC variable speed motor Dust tight slip ring assemblyFinal revolution deceleration and positive stop alignmentHeavy Duty Formed/Structural SteelElectro-static powder coated paint finish5 Year Warranty on Steel Fabrications

AUTOMATION FEATURES:Electro-mechanically actuated film clamp mechanismElectro-mechanically actuated film tail cut/wiper arm mechanismNi-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle

LOAD CAPACITY:Unlimited load weight50” L x 50” W x 86” H maximum load size24” L x 24” W x 24” H minimum load sizeNOTE: Larger load size options are available