© 2013, DPI. Trimble and the Globe & Triangle logo are trademarks of Trimble Navigation Limited, registered in the United States and in other countries. All other trademarks are the property of their respective owners.

The Trimble® S3 Total Station – An Affordable Solution that Provides Everything You Need for Effi cient Surveying.

Whether you need to equip a new crew, replace older gear or start a new offi ce, the Trimble® S3 Robotic Total Station solution is all you need to conduct effi cient surveying projects. Built on proven Trimble technologies, the S3 is designed to provide the functionality you need at a price you can afford.

State-of-the-art Controller – Trimble’s TSC3® controller optimized for Trimble Access™ fi eld software (included in the robotic solution) streamlines everyday surveying work and reduces the number of peripheral devices you need.

MagDrive™ Electro-magnetic Technology – the S3’s highly reliable servo drives have fewer moving parts for enhanced dependability and reduced servicing requirements.

High Capacity Battery with Intelligent Charger – the S3 runs for six hours in Robotic mode on one internal integrated lithium-ion battery, with no cable needed. The all-in-one battery charger allows you to recharge your total station and GPS/GNSS system batteries simultaneously.

Direct Refl ex (DR) Technology – Trimble’s unique DR technology enables measurements without a prism on almost any type of surface, including hard-to-reach targets in dangerous or unsafe

locations. Overhead cables, tunnels, bridges, quarry faces, stockpiles, buildings, and elevations can all be measured quickly, easily, and safely.

Coaxial Optics, EDM, Tracker, Laser Pointer – the optics in the Trimble S3 are made by Carl Zeiss, and are fully coaxial for measurement confi dence and reliability.

Integrated Surveying™ – the S3 provides a foundation you can build on, including access to Trimble’s Integrated Surveying (I.S.) solutions. I.S. allows you to seamlessly integrate complementary technologies on the job site, such as Trimble GPS/GNSS and optical measurements. Trimble’s fi eld and offi ce software combine and manage all the data, making it easy to take advantage of the best that each technology has to offer. Combine the Trimble S3 with Trimble’s GNSS receivers to create a Trimble I.S. Rover and start reaping the productivity gains from Integrated Surveying.

The survey professionals at Duncan-Parnell are ready to help you improve your surveying effi ciency with a Trimble solution that fi ts your needs and budget. For nearly 70 years, our name has been synonymous with the best surveying products and service in the region. Call us today.

YOUR TRIMBLE SURVEY CONNECTION

IN THE CAROLINAS, GEORGIA & VIRGINIA duncan-parnell.com

Summer 2013

Technology Update: Trimble’s Integrated GNSS Survey Receivers Now Offer Increased Functionality.

With the release of the R10 GNSS system, Trimble also introduced improved technology for its core line of integrated GNSS survey receivers, including the Trimble® R4, Trimble R6 and Trimble R8. The updates include increased satellite tracking and Real Time Kinematic (RTK) performance. These improvements modernize each of these products with added functionality, fl exibility and capability, as well as providing more options for surveyors.

Check out the technical details at: blog.duncan-parnell.com/?p=448

NEW! NIST Traceable Calibrations Now Available from Duncan-Parnell.Duncan-Parnell is now offi cially licensed to provide NIST traceable calibrations on optical instruments, (total stations, theodolites, transits and auto levels), GPS receivers (RTK systems), and lasers (pipe, slope and level). NIST (National Institute of Standards and Technology) is the nationally- recognized standards organization in the U.S. Under NIST standards, all calibration processes are documented and performed in accordance with ISO 17025 guidelines, to ensure that the original manufacturer’s specifi cations for accuracy are met.

Why You Should Calibrate to NIST Standards• An ISO17025 accredited calibration is accepted by

government agencies such as the NRC (NQA1), EPA, DoD. Many private industry entities also require regular equipment calibration with NIST traceability.

• Our certifi cates of calibration provide complete details of the calibration parameters, in addition to NIST and international traceability.

• Our certifi cates meet “court admissible” requirements.

YOUR TRIMBLE SURVEY CONNECTION

IN THE CAROLINAS, GEORGIA & VIRGINIA For More Information Call

Trimble AccessSync is Now FREE with a Valid Trimble Access Software Maintenance Agreement.Trimble® Access™ fi eld software is designed to support your everyday work, including topographic surveys, staking, control and more. Trimble Access for General Survey supports the full range of Trimble GNSS and optical sensors, plus robotic radio connections. Plus, it offers a familiar easy-to-use interface to help ensure a short learning-curve.

AccessSync securely synchronizes fi eld and offi ce fi les between the fi eld data collector and the Trimble Connected Community portal for your offi ce team. You can set AccessSync to continu-ously post and receive job fi les for always-on connections with the offi ce. With AccessSync, the offi ce staff can perform initial quality assurance checks before the team leaves the site, and start work sooner on creating client deliverables.

A Revolutionary, Cost-Effective & Versatile Scanning Solution.The Trimble® TX5 3D laser scanner is ideal for a wide variety of applications including surveying, building information modeling (BIM), industrial facilities, reverse engineering, tunneling, crime scenes and more.

Compact and Lightweight – smallest and lightest scanner available for enhanced mobility

Effi cient – quickly capture high resolution data

Economical – no large initial investment; perfect for entry into 3D laser scanning

Easy to Use – clear and concise touch screen interface and intuitive onboard software makes it quick and easy to get started

Learn more at http://bit.ly/18R1hzf

Toll Free: 1-800-353-7392 duncan-parnell.com

PRESORTEDSTANDARD

U.S. POSTAGE PAIDPERMIT #1157

CHARLOTTE NC

Duncan-Parnell, Inc.900 S. McDowell St.Charlotte, NC 28204

Summer 2013

YOUR TRIMBLE SURVEY CONNECTION IN THE CAROLINAS AND GEORGIA duncan-parnell.com

In This Issue• The Afforable Trimble® S3 Total Station

• New Functionality for Trimble GNSS Receivers

• NIST Traceable Calibrations

• Trimble TX5 3D Laser Scanner

• Trimble Access™ Now FREE with a Valid Software Maintenance Agreement

• Revolutionary Trimble R10 GNSS Receiver

The NEW Trimble® R10 GNSS Receiver – Productivity Beyond GNSS.The fi rst of its kind, the new Trimble® R10 GNSS System is designed to help you work more effectively. With powerful new technologies like Trimble HD-GNSS, Trimble SurePoint™, and Trimble xFill™ integrated into a new design, this powerful system ensures you can collect more accurate data faster and easier, no matter the job.

• The smallest and lightest receiver in its class

• Cutting edge Trimble HD-GNSS processing engine

• Automatic point measurement and traceable tilt values using Trimble SurePoint technology for enhanced quality assurance

• Electronic bubble so you can focus in one place

• Trimble xFill technology provides RTK coverage during connection outages

• Powerful 440 channel solution with Trimble 360 technology advanced satellite tracking

• Pair with Trimble Access™ and the TSC3 controller for the most powerful solution on the market

See it yourself at trimble.com/R10showcase