The Traditionalcustomdining.jonathancharlesfurniture.com/pdf/CDP... · Jonathan Charles’ account (trade only), if assistance is needed, please contact your sales representative

The TraditionalDining Table CreaTor

123

2FolloW THe STePS

anD Fill oUT THe ForM

4aFTer SUbMiTTing YoUr inQUirY,

geT DraWing & PriCe in 72 WorKing HoUrS

72

5SenD aPProVal oF

DraWing & Po

7YoU aPProVe

THe FiniSH SaMPle

6JonaTHan CHarleS MaKeS

a MaSTer FiniSH SaMPle

8We ProDUCe

YoUr Table & SHiP

3FaX/SCan or SUbMiT YoUr inQUirY online

3. lead-time: approximately 17 weeks from receipt of your approval sample panel, the production will not begin without your sample approved.

4. The price is valid within 60 days, after that period a new inquiry should be submitted.

1. For all inquiries/orders, you must use your own Jonathan Charles’ account (trade only), if assistance is needed, please contact your sales representative.

2. a 100% deposit and signed drawing are required when the official Po is submitted.

DiSClaiMer:

An 8 step process to complete your unique tAbleaPPlY To boTH TraDiTional anD TranSiTional & MoDern STYle

1geT a DigiTal broCHUre

or ViSiT oUr WebSiTe

wwwor


3www.customdining.jonathancharles.com

FiXeD tops

Please choose your option and enter the reference code here.Thank you! Reference code e.g. (ST1)

FiXeD SQUare (SH1)

l

FiXeD roUnD (SH2)

(has lazy susan option)

Ø

FiXeD oVal (SH3)

l

W

FiXeD reCTangUlar (SH4)

l

W

1.1 enter your customer’s name or project here.1.2 Select a style (ST) Formal traditional style (ST1) or country style (ST2)

Ø = Diameter, L = Length, W = Width

please check! ( ) cm incH

project nAme & style (st)

sHApe (sH) & Dimensions2 3

1

Follow tHe steps From 1 to 10.SiMPlY enTer THe reFerenCe CoDe in THe rigHT HanD ColUMn.

iF CHooSe FiXeD ToP, PleaSe go To STeP 5.1

Enterreferencecode here


● The length of a round-to-oval table is determined by the width of the leaf.● If you chose round-to-round (SH5) type, the moulding when leaves are closed, will be automatically standard type.

● roUnD-To-oVal (DroP-in) (SH7)

Ø (closed)

reCTangUlar (DraW leaF) (SH10)

● roUnD-To-roUnD (DroP-in) (SH5)

Ø (closed)

reCTangUlar (SelF-SToring) (SH8)

l

W

(closed)

FolD oVer SQUare (SH11)

l (open)

● roUnD-To-oVal (SelF-SToring) (SH6)

Ø (closed)

reCTangUlar (DroP-in) (SH9)

l

W

(closed) l

W

(closed)

FolD oVer reCTangUlar (SH12)

l

W

(open)

sHApe (sH) & DimensionswitH eXtensions2 3



4.1 select leAF siZe (ls)

You have selected the leaf type in step 2. now select the leaf size and the number of leaves.

if you want another leaf size, simply note your inquiry on the summary page.

leAF siZe 22” (56 cm) 24” (61 cm) 26” (66 cm) 28” (71 cm)

coDe lS1 lS2 lS3 lS4

DroP-in leaF (l2)

leaf size

SelF-SToring leaF (l3)

leaf size

● DraW-leaF (l4)

leaf size

For sHApes: sH6-sH10

● Draw-leaf (L4) leaf size is limited of 24 inches max.

leAF siZe & number oF leAves (l)4

● For storing leave, we offer you a storage cabinet.

For sHApes: sH5

DroP-in leaF (l5)

leaf size

DiAmeter Ø (inch or cm) number oF leAves & bAses leAF siZe coDes

FroM To

D 36” D 91 cm

D 52”D 132 cm

4 leaVeS & 1 baSe

10” (25 cm) lS5

D 54”D 137 cm

D 58”D 147 cm

6 leaVeS & 1 baSe

12” (30 cm) lS6

D 60”D 152 cm

D 64”D 162.5 cm

8 leaVeS & 1 baSe

14” (36 cm) lS7

D 66”D 168 cm

D 70”D 178 cm

8 leaVeS & 1 baSe

16” (41 cm) lS8

FolD oVer (l6)

For sHApes: sH11-sH12

number oF leAves & bAses leAF siZe coDes

2 leaVeS & 1 baSe Width leaf size = ½ Width of table lS9


leAF siZe & number oF leAves (l)4.2 select number oF leAves For sHApe sH8 / sH9 (ln)

lengTH (inch) lengTH (cm)nUMber oF

leaVeS & baSeS CoDeSFroM To FroM To

Width 44”l 80”

Width 50”l 146”

Width 112 cml 203 cm


1 leaF/2 baSeS ln1

Width 46”l 80”

Width 50”l 144”



2 leaVeS/2 baSeS ln2

Width 52”l 146”

Width 56”l 246”




Width 58”l 200”

Width 62”l 274”


Width 157.5 cm l 696 cm


Width 64”l 276”

Width 70” l 360”


Width 178 cm l 914 cm


4



GooD to know

below Are A Few GuiDelines tHAt Help you to cAlculAte tHe lenGtH oF your DininG tAble AnD tHe number oF cHAirs tHAt Fit ArounD it.

basic information:• We use a 22” side chair plus 5” space (= 27”) to calculate the number of chairs as shown in the formulas below.• 1 Leaf = 2 chairs (not applicable for round-to-round leaf)• Side = Side chair• Arm = Armchair

5”

22”

For rounD-to-ovAl sHApes: sH6, sH7HoW To CalCUlaTe THe DiaMeTer FroM CloSeD To oPen?

[DiaMeTer closed] + [leaf size] = [length open]

HoW To CalCUlaTe THe nUMber oF CHairS?

[DiaMeTer] x [3.14/27”] + [2 SiDeS] = number of chairs (oPen)

+ =

For rounD sHApes: sH2, sH5HoW To CalCUlaTe THe DiaMeTer FroM CloSeD To oPen?

[DiaMeTer closed] + [leaf size x 2] = [DiaMeTer open]


[DiaMeTer] x [3.14/27”] = number of chairs

Ø

openop

en

For squAre AnD rectAnGulAr sHApes: sH1, sH4, sH8, sH9, sH10HoW To CalCUlaTe THe lengTH oPen For SH8, SH9?

[length closed] + [leaf size x number of leaves] = [length open]


[length/27”] x [2] + [2 SiDeS] + [2 arMS] = number of chairs (oPen)

HoW To CalCUlaTe THe lengTH oPen For SH10?

[length closed] + [leaf size x number of leaves] = [length open]


[length/27”] x [2] + [4 SiDeS] + [2 arMS] = number of chairs (oPen)

+ =

+ =


For shapes: SH1 to SH9

baSe (b33)

H7

H8H3

baSe (b1)


H4

H7


H7

baSe (b6)

baSe (b34)


H3H4

H5


baSe (b2)

H3

H7 H8

baSe (b19)

For shapes: SH1 To SH7

H7H8

baSe (b5)

H3

H4

H5


baSe (b26)

H4



baSe (b4)

H5

H4H3

For shapes:SH1 to SH9

baSe (b24)

H3

H4

H5


For shapes: SH1, SH4

baSe (b41)


baSe (b3)

H6H5


baSe (b22)

H7

H3


baSe (b8)

For shapes:SH3, SH4, SH8 to SH12

baSe (b13)


baSe (b9)


baSe (b14)


baSe (b10)


baSe (b15)


baSe (b11)


baSe (b16)


baSe (b7)

For shapes:SH3, SH4, SH10

baSe (b12)


FormAl bAse options

country bAse options

bAses (b)5.1 SeleCT THe baSe oF YoUr Dining Table




Post gilding (H3)Post bracket gilding (H4)Foot gilding (H5)Pedestal gilding (H6)leg gilding (H7)Post Moulding (H8)

baSe (b35)


baSe (b18)


baSe (b21)


baSe (b25)


baSe (b17)


baSe (b23)


● Top dimension is limited to 32-72 inches only.

gilded highlighting is available in silver or gold and applicable on many areas of a base, therefore you can select multiple options. all formal bases are marked with “H” to show you where it is applicable.

country bAse options


HiGHliGHts (H)5.2 SeleCT gilDing on a ForMal baSe

H6

H7

H8H3

H4

H5

baSe (b20)


baSe (b37)


●


FormAl wooD FinisHes6.1 wooD (w)

SeleCT THe WooD FiniSH

● No top detail can be used with W35.

Fin-MaH-02-1

MeDiUM anTiQUe MaHoganY (W1)

Fin-Sae-01

SanToS roSeWooD SaTin (W18)

eboniSeD(W23)

Fin-Pai-20

iVorY(W37)

Fin-MHP-15

Fin-CrW-02

MeDiUM CroTCH WalnUT (W2)

Fin-zeb-02

MeDiUM zebrano(W19)

DarK CroTCH WalnUT (W24)

Fin-CrW-03

MeDiUM WaXeD MaHoganY (W38)

Fin-MaH-02-14

Fin-SaT-02-1

MeDiUM SaTinWooD (W3)

Fin-Mae-01

FaUX MaCaSSar ebonY(W20)

DarK aMeriCan CroTCH WalnUT (W25)

Fin-CrW-05

Fin-MaH-04-1

anTiQUe MaHoganY broWn - HigH lUSTre (W12)

Fin-Wal-07

ligHT WalnUT MaSUr birCH (W21)

CaliSTa(W35)

●

Fin-Sae-05

Fin-Sae-03-1

DarK SanToS roSeWooD (W13)

Fin-Dal-01-1

ligHT Daniella(W22)

ebonizeD blaCK (W36)

Fin-Pai-129

Due to printinG process tHe colours sHown in tHis cAtAloGue mAy vAry From tHe ActuAl FinisH.



● W8, W15, W16 are not applicable with T9, T10, T11, T12, T13, T14. ● W4, W17 are not applicable with T13, T14.● W26, W29, W31, W32 are only applicable with T9, T10, T11, T12, T14, T22.

country wooD FinisHes6.1 wooD (w)

SeleCT THe WooD FiniSH

country pAinteD FinisHes

Country painted finishes are not applicable for the following top types: T9, T10, T11, T12, T13, T14.

6.1 wooD (w)SeleCT THe WooD FiniSH

PainTeD HoneY blaCK DiSTreSSeD (W9)

Fin-Pai-16

PainTeD oFF-WHiTe (W10)

Fin-Pai-17

PainTeD CoUnTrY Sage (W11)

Fin-Pai-15

PainTeD greY WeaTHereD (W14)

Fin-Pai-25

Fin-oaK-03

DarK broWn TUDor oaK(W4)●

MaCaSSar ebonY(W28)

Fin-aMa-01-1

ligHT argenTinian WalnUT (W15)

●

Fin-oFr-01

Fin-Wal-01-1

ligHT WalnUT (W5)

anTiQUe DarK greY (W29)

●

Fin-Pai-81-2

ligHT rUSTiC bUrr oaK (W16)●

Fin-lbU-01-4

Fin-Wal-02-1

MeDiUM WalnUT (W6)

CoUnTrY FarMHoUSe WalnUT (W31)

●

Fin-Wal-16

TUDor oaK broWn(W17)

●

Fin-oaK-06-1

Fin-Wal-03

DarK WalnUT(W7)

rUSTiC greY aCaCia (W32)

●

Fin-Pai-80-1

liMeD aCaCia(W26)

●

Fin-Pai-66

Fin-Fig-02

MeDiUM FigUreD WalnUT (W8)

●

ligHT naTUral oaK (W27)

Fin-oaK-13


FormAl top options, inlAys & borDers6.2 top DetAil (t)

iF no ToP DeTail, PleaSe ForWarD To STeP 7

STring 1 (T2)

34 m

m [1

¼”]

SanToS (T6)

34 m

m [1

¼”]

CHain linK (T16)

85 m

m [3

¼”]

Herringbone (T20)

85 m

m [3

¼”]

STring 2 (T3)

40 m

[1 ½

”]SaTinWooD 3 (T7)

40 m

m [1

½”]

ornaMenTal (T21)

85 m

m [3

¼”]

Floral (T17)

85 m

m [3

¼”]

SaTinWooD 1 (T4)

76m

m [3

”]

Floral (T8)

82 m

m [3

¼”]

Floral MoP (T23)

85 m

m [3

¼”]

SeaWeeD (T18)85

mm

[3 ¼

”]

roPe TWiST (T15)

85 m

m [3

¼”]

SaTinWooD 2 (T5)

88 m

m [3

½”]

Floral Veneer& MoP (T24)

85 m

m [3

¼”]

boXWooD (T19)

82 m

m [3

¼”]

Due to printinG process tHe colours sHown in tHis cAtAloGue mAy vAry From tHe ActuAl FinisH.



ParQUeT SQUare (T10)

raTTan (bD2)

MaiSonarY (T11)

FreTWorK (bD3)

ParQUeT (T22)

PlanK (T9)

anTiQUe Mirror (bD1)

ParQUeTrY (T13)

eTCHeD glaSS (bD5)

DoVe Tail (T12)

CreaM SHagreen (bD4)

country top options

FormAl bAse DetAil options

6.2

6.3

top DetAil (t)

bAse DetAil (bD)

iF no ToP DeTail, PleaSe ForWarD To STeP 7

iF CHoiCe THiS STeP, PleaSe SKiP To STeP 7

SaWn DiSTreSSeD (T14)

blaCK leaTHer (bD6)


● Not applicable with an apron.● M1, M2, M6, M14 are not applicable with SH11, SH12.● M2, M3, M4, M5, M7, M8, M9, M10, M11, M12, M13 are not applicable with W29, W31, W32.

7.1 moulDinG (m)SeleCT THe MoUlDing

MoUlDing (M1)

26 m

m

1”

21 mm1”

●

MoUlDing (M4)

26 m

m

1”

21 mm1”

●

19 m

m

¾”

21 mm 1”

MoUlDing (M7)●

MoUlDing (M13)

26 m

m

1”

21 mm1”

●

80 m

m

3 ¼

”

MoUlDing (M10)●●

26 m

m

1”

21 mm1”

MoUlDing (M3)●

50 m

m

2”

MoUlDing (M12)●●

MoUlDing (M16)

90 m

m

3 ½

”

●

MoUlDing (M9)

44 m

m

1 ¾

”

●

62 m

m

2 ½

”

MoUlDing (M6)●●

MoUlDing (M2)

21 mm1”

26 m

m

1”

●●

MoUlDing (M11)

60 m

m

2 ¼

”

●●

MoUlDing (M14)

48 m

m

1 ¾

”

●●

MoUlDing (M8)26

mm

1”

●26

mm

1”

21 mm1”

MoUlDing (M5)●



H2

H9

add a luxurious eye-catching detail to your dining table by using gold or silver leaf on the moulding.

● A4, A6, A11 are not applicable with W29, W31, W32.

ToP eDge MoUlDing (H2)aPron eDge MoUlDing (H9)

7.2 Apron (A)SeleCT THe aPron

7.3 HiGHliGHts (H)SeleCT gilDing on eDge MoUlDing

● A8, A9 are not applicable with SH11, SH12.

aPron (a1)

76 m

m3”

aPron (a7)

52 m

m2”

aPron (a10)

76 m

m3”

aPron (a4)

76 m

m3”

● aPron (a5)

76 m

m3”

aPron (a2)

76 m

m3”

aPron (a11)

76 m

m3”

●

aPron (a8)34

mm

1 ¼

”

●

aPron (a3)

76 m

m3”

aPron (a6)

61 m

m2

½”

●

aPron (a9)

34 m

m1

¼”

●


a finish sample will be sent to you for approval, after you have confirmed your Purchase order.40 and 80 sheen are Jonathan Charles’ standard sheens.

● 20 Satin: Country Painted Finishes Only.

20 (S1) - SaTin

40 (S2) - JC SaTin

60 (S3) - HigH SHeen

80 (S4) - JC HigH SHeen

This step is not applicable with SH11, SH12.

● C2, C6 are not applicable with W29, W31, W32.

8 corner sHApe (c)SeleCT THe Corner SHaPe

9 sHeen (s)SeleCT THe SHeen oF YoUr Dining Table

SHaPe 7 (C7)

SHaPe 3 (C3)SHaPe 1 (C1)

SHaPe 5 (C5)

SHaPe 4 (C4) SHaPe 2 (C2)●

SHaPe 6 (C6)●

●



Multiple choices are possible.The table below shows you which technique is available for formal and country style, as well as the levels of distressing of each technique.

Light = less distressed on the surface. Heavy = very distressed on the surface. If no distressing or antiquing is required, please do not tick any of the selections on the form.

When we refer to dIsTressIng at Jonathan Charles, we refer to the physical application of a variety of different marks or lines on the surface and edges to replicate the natural knocks that an item endures over years of use. dIsTressIng TeCHnIques are applied with stones, chains and other tools. AnTIquIng on the other hand is applied with stains and glazes using brushes and cloth during the finishing process. examples of this are faint water marks or ink spots, shading at the edges or flecks of stain placed randomly over the surface. Both distressing and antiquing can be applied in light, medium or heavy.

TECHNIQUESFORMAL COUNTRY

LIgHT MedIuM HeAVY LIgHT MedIuM HeAVY

DIST

RESS

ING

d1 rOunded edge

d2 CrACKIng/

sPLITTIng

d3 WOOd WOrMs

d4 IndenT

d5 sTOne MArK

d6 CHAIn MArK

AN

TIQUI

NG

AT1 sPLATTer

AT2 sHAdIng

DISTRESSING (D) & ANTIQUING (AT) TECHNIQUES10 seLeCT THe dIsTressIng And/Or AnTIquIng TeCHnIques & THe dIsTressIng LeVeL.


lAZy susAn DiAmeter Ø (incH or cm) lAZy susAn (incH or cm)

From To From To

D 40” D 102 cm

D 110”D 279 cm

D 16” D 41 cm

D 64”D 163 cm

based on your table dimension we suggest the following lazy susan options.

Lazy susan is only avalaible for fixed round shape (SH2).

11 lAZy susAn (lZ)SeleCT THe lazY SUSan



Please re-enter all reference code selections in the boxes below, once you have completed the steps.Tear off this page to fax or scan and email to us. See the relevant contact address for your country on the back cover.

STEP 1.1 Re-enter project name here

steps

8 C

9 S

10

FormAl country

D1 l M H

D2 l l M H

D3 l l M H

D4 l M l M H

D5 l M M H

D6 l M M H

aT1 l M H l M H

aT2 l M H l M H

11 lz

DiS

TreS

Sin

ga

nTiQ

Uin

g

steps

1 1.2 ST

2 SH

3

Ø

l

W

4lS

ln

55.1 b

5.2 H

66.1 W

6.2 T

7

7.1 M

7.2 a

7.3 H

Circle INCH or CM OPEN or CLOSED

INCH/CM | OPEN/CLOSED

INCH/CM



Multiple choicespossible.

Enter referencecode here

Enter referencecode here Circle L M H

if you have multiple choices in 5.2, please enter codes as shown: H1, 2, 3, 4, 5, 6, 7

l = light, M = Medium, H = Heavy

if you have any comments or queries, please clearly note them belowYour name

account #

Your sales rep

Company name

Phone #

e-mail

address

zip code Po box

enter your inFormAtion & senD us your comments

summAry

Scan code to view the website

A must HAve tool wHen presentinG to your customers

trADe only - reGister to Get stArteD!To get started, you must login. With Trade access you will have access to JC’s main web catalogue and the table creator. once you have applied for Trade access our sales representative will approve you within 24 hours.

CreaTe online

we HAve lAiD out 10 steps For you.eAcH step incluDes A reFerence coDe, e.G st 1.

Select the option you wish

note the reference code in the marked area

Fill in all the steps on the summary page

Fill in your contact information and any special comments

Finally tear off and send the summary sheet to us by email or fax

Can’t find the options you want listed?

Please feel free to send us the information and an image or sketch of your custom creation!

2

3

4

5

1

CreaTe oFFline

geT a DigiTal broCHUre & geT STarTeD!



www.customdining.jonathancharles.com

ConTaCT US

USa & CanaDaT +1 252 446 3266 | F +1 252 977 [email protected]

eUroPe T +44 114 245 2777 | F +44 114 245 6411 [email protected]

oTHer CoUnTrieS [email protected]

The Transitional & ModernDining Table CreaTor

Welcome to the Dining table Programme

as the world of home furnishing has evolved in recent years individuality and customization have become key components as consumers look to define their own style and distinguish their homes. The home has become an extension of the consumer’s personality and reflects their style and values. recognizing this evolution and seeing an increase in custom requests from our customers, Jonathan Sowter, Ceo, started to work on the concept of providing a framework that would allow our customers to build custom dining tables from established styles, shapes, moldings, trims and finishes. Within a matter of months The Custom Dining Program was born. Starting originally with formal traditional styles it has quickly grown to include country and transitional styles as well. The Custom Dining Creator®, as we call our web-based software, allows our customers to build their table on-line with a whole range of possible combinations of taken from existing Jonathan Charles options.

reaction time and information is key, which is why when the customer completes the web-based custom dining form, we immediately provide a guide price and approximate lead-time*. We even allow the customer to upload a photo or sketch if they cannot quite find what they are looking for in our list of options and within 48 hours the customer will receive a drawing of their table.

There are other custom dining programs in the market but none with the breadth of choice and possible permutations offered at Jonathan Charles. Combining the customer’s creativity and our craftsmanship the Jonathan Charles Custom Dining Program will result in beautiful unique dining tables and satisfied end buyers.

it’s all in the Detail... it’s all about your style...it’s custom Dining creator®

*lead time is updated weekly and is counted from the receipt of your approved sample panel, the production will not begin without your sample approved. This time frame can range from 10 - 18 weeks depending on capacity.



123

2FolloW THe STePS

anD Fill oUT THe ForM

4aFTer SUbMiTTing YoUr inQUirY,

geT DraWing & PriCe in 72 WorKing HoUrS

72

5SenD aPProVal oF

DraWing & Po

7YoU aPProVe

THe FiniSH SaMPle

6JonaTHan CHarleS MaKeS

a MaSTer FiniSH SaMPle

8We ProDUCe

YoUr Table & SHiP

3FaX/SCan or SUbMiT YoUr inQUirY online

3. lead-time: approximately 17 weeks from receipt of your approval sample panel, the production will not begin without your sample approved.

4. The price is valid within 60 days, after that period a new inquiry should be submitted.

1. For all inquiries/orders, you must use your own Jonathan Charles’ account (trade only), if assistance is needed, please contact your sales representative.

2. a 100% deposit and signed drawing are required when the official Po is submitted.

DiSClaiMer:

an 8 steP Process to comPlete your unique tableaPPlY To boTH TraDiTional anD TranSiTional & MoDern STYle

1geT a DigiTal broCHUre

or ViSiT oUr WebSiTe

wwwor

base toP material inDeX(all finishes are available as shown)

leaTHer (bT7)

laCQUer (bT8)

SHagreen (bT5)

Marble (bT6)

eTCHeD barSS (bT1)

egloMiSe glaSS (bT2)

WooD inlaY (bT3)

eggSHell (bT4)



Finish inDeX(all finishes are available as shown)

WooD Finishes

Fin–SaT-02-1

MeDiUM SaTinWooD (W3)

Fin-Wal-02-1

MeDiUM WalnUT (W6)

Fin-Wal-01-1

ligHT WalnUT (W5)

Fin–oaK-03

DarK broWn TUDor oaK (W4)

Fin–MaH-02-1

MeDiUM anTiQUe MaHoganY (W1)

Fin-CrW-02

MeDiUM CroTCH WalnUT (W2)

Fin–MaH-04-1

anTiQUe MaHoganY broWn (W12)

Fin-lbU-01-4

ligHT rUSTiC bUrr oaK (W16)

Fin-oFr-01

ligHT argenTinian WalnUT (W15)

Fin-Sae-03-1

DarK SanToS roSeWooD (W13)

Fin-Wal-03

DarK WalnUT (W7)

Fin-Fig-02

MeDiUM FigUreD WalnUT (W8)

Fin-Zeb-02

MeDiUM Zebrano(W19)

Fin-Dal-01-1

ligHT Daniella(W22)

Fin-Wal-07

ligHT WalnUT MaSUr birCH (W21)

Fin-Mae-01

FaUX MaCaSSar ebonY (W20)

Fin-oaK-06-1

TUDor oaK broWn(W17)

Fin-Sae-01

SanToS roSeWooD SaTin (W18)

Fin-CrW-05

DarK aMeriCan CroTCH WalnUT (W25)

Fin-aMa-01-1

MaCaSSar ebonY (W28)

Fin-oaK-13

ligHT naTUral oaK (W27)

Fin-Pai-66

liMeD aCaCia(W26)

Fin-Pai-20

eboniSeD(W23)

Fin-CrW-03

DarK CroTCH WalnUT (W24)

Fin-Wal-16

CoUnTrY FarMHoUSe WalnUT (W31)

Fin-gSY-01

CHaMPagne(W34)

Fin-beC-01-2

PaloMa(W33)

Fin-Pai-80-1

rUSTiC greY aCaCia (W32)

Fin-Pai-81-2

anTiQUe DarK greY (W29)

Fin-Wal-20-2

ManHaTTan WalnUT (W30)

Fin-Sae-05

CaliSTa(W35)

Fin-Pai-129

eboniZeD blaCK (W36)

Fin-MHP-15

iVorY(W37)

Fin-MaH-02-14

MeDiUM WaXeD MaHoganY (W38)


PainteD Finishes

Fin-Pai-16

PainTeD HoneY blaCKDiSTreSSeD (W9)

Fin-Pai-17

PainTeD oFF-WHiTe(W10)

Fin-Pai-15

PainTeD CoUnTrY greY(W11)

lacquer Finishes

laCQUer 7(lQ7)

Fin-laC-02-1

laCQUer 13(lQ13)

Fin-Pai-47-1

laCQUer 8(lQ8)

Fin-laC-08-1

laCQUer 9(lQ9)

Fin-Pai-40-1

laCQUer 11(lQ11)

Fin-Pai-44-1

laCQUer 10(lQ10)

Fin-Pai-41-1

laCQUer 12(lQ12)

Fin-Pai-46-1

laCQUer 6(lQ6)

Fin-laC-05-1 Fin-laC-07-1 Fin-laC-06-1 Fin-laC-09-1 Fin-laC-03-1 Fin-laC-04-1

laCQUer 1(lQ1)

laCQUer 2(lQ2)

laCQUer 3(lQ3)

laCQUer 4(lQ4)

laCQUer 5(lQ5)

WooD inlay oPtions

Fin-MaH-14-2

bleaCHeD MaHoganY (WI1)

Fin-aMa-02-1

MaCaSSar ebonY HigH lUSTre (WI2)

Fin-ne-01-1

TroPiCal WalnUT CroTCH (WI3)

Fin-Wal-22-1

langKaWi naTUral WalnUT (WI4)



eggshell oPtions

Fin-Sgi-e017

WHiTe SMoKe eggSHell (e1)

Fin-Sgi-e040

MiDnigHT eggSHell (e2)

Fin-Sgi-e064

DarK CreaM eggSHell (e3)

Fin-Sgi-e097

laTTe on inVerTeD broWn eggSHell (e4)

Fin-Sgi-e096

greY on inVerTeD broWn eggSHell (e5)

shagreen oPtions

Fin-SHa-02

anTHraCiTe SHagreen (Sg1)

Fin-SHa-03

green SHagreen (Sg2)

Fin-SHa-09

Teal SHagreen (Sg3)

Fin-SHa-14

anTiQUe iVorY SHagreen (Sg4)

Fin-SHa-22-2

HaMilTon WHiTe SHagreen (Sg5)

leather oPtions

Fin-lea-51-Sb

HaVen leaTHer (le1)

Fin-lea-01-Sb

ligHT anTiQUe CHeSTnUT leaTHer (le2)

Fin-lea-05-Sb

ParliaMenT reD leaTHer (le3)

Fin-lea-07-Sb

MeDiUM engliSH librarY green leaTHer (le4)

Fin-lea-09-Sb

anTiQUe CaViar blaCK leaTHer (le5)

marble oPtions

Fin-Mar-07-1

blaCK & WHiTe SWirl Marble (Ma1)

Fin-Mar-13-1

green naPolY Marble (Ma2)

Fin-Mar-14-1

green onYX Marble (Ma3)

Fin-Mar-29-1

WHiTe CalCUTTa Marble (Ma4)


Fin-Pai-04-1 Fin-Pai-05-2

gilDing highlights oPtionsgolD leaF

(gi1)SilVer leaF

(gi2)

Fin-egl-01 Fin-egl-07Fin-egl-06

glass oPtionsegloMiSe glaSS

(gl2) anTiQUeD glaSS

(gl3) Plain glaSS

(gl1)

stainless steel oPtions

Fin-bra-22-1

braSS FiniSH STeel (SS2)

Fin-STP-25

bronZe STainleSS STeel (SS3)

Fin-STP-01-1

PoliSHeD STainleSS STeel (SS1)

brass oPtions

Fin-niK-01

niCKel(br2)

Fin-bra-04-2

bronZe(br3)

Fin-bra-09-1

braSS(br1)

iron oPtions

Fin-Pai-21

gilDeD iron(ir1)

Fin-Pai-26-1

SilVer iron(ir2)

Fin-Pai-39-1

bronZe iron(ir3)

MUlTi ironS(ir4)




For shaPe: sh5Diameter Ø (inch or cm) number oF

leaVes & bases leaF siZe coDesFrom to

D 36” D 91 CM

D 52”D 132 CM

4 leaVeS & 1 baSe

10” (25 CM) lS5

D 54”D 137 CM

D 58”D 147 CM

6 leaVeS & 1 baSe

12” (30 CM) lS6

D 60”D 152 CM

D 64”D 162.5 CM

8 leaVeS & 1 baSe

14” (36 CM) lS7

D 66”D 168 CM

D 70”D 178 CM

8 leaVeS & 1 baSe

16” (41 CM) lS8

select leaF siZe (ls)You have selected the leaf type in step shape. now select the leaf size and the number of leaves. if you want another leaf size, simply note your inquiry on the summary page.

select number oF leaVes For shaPe sh9 (ln)

leaF siZe & number oF leaVes (l)

length (inch) length (cm) number oF leaVes & bases coDes

From to From to

WiDTH 44”l 80”

WiDTH 50”l 146”

WiDTH 112 CMl 203 CM


1 leaF/2 baSeS

ln1

WiDTH 46”l 80”

WiDTH 50”l 144”



2 leaVeS/2 baSeS

ln2

WiDTH 52”l 146”

WiDTH 56”l 246”



2 leaVeS/3 baSeS

ln3

WiDTH 58”l 200”

WiDTH 62”l 274”


WiDTH 157.5 CM l 696 CM

3 leaVeS/4 baSeS

ln4

WiDTH 64”l 276”

WiDTH 70” l 360”


WiDTH 178 CM l 914 CM

4 leaVeS/5 baSeS

ln5

For shaPes: sh7, sh9 leaF siZe coDes

22” (56 CM) lS1

24” (61 CM) lS2

26” (66 CM) lS3

28” (71 CM) lS4

DroP-in leaF (l2)

DroP- in leaF (l5)

● For storing leave, we offer you a storage cabinet.

gooD to knoW

beloW are a FeW guiDelines that helP you to calculate the length oF your Dining table anD the number oF chairs that Fit arounD it.

basic information:• We use a 22” side chair plus 5” space (= 27”) to calculate the number of chairs as shown in the formulas below.• 1 Leaf = 2 chairs (not applicable for round-to-round leaf)• Side = Side chair• Arm = Armchair

5”

22”

For rounD-to-oVal shaPes: sh7How to calculate the diameter from closed to open?

[DiaMeTer closed] + [leaf size] = [length open]

How to calculate the number of chairs?

[DiaMeTer] x [3.14/27”] + [2 SiDeS] = number of chairs (oPen)

+ =

For rounD shaPes: sh2, sh5How to calculate the diameter from closed to open?

[DiaMeTer closed] + [leaf size x 2] = [DiaMeTer open]


[DiaMeTer] x [3.14/27”] = number of chairs

Ø

openop

en

For square anD rectangular shaPes: sh9How to calculate the length open for SH9?

[lengTH CloSeD] + [leaF SiZe X nUMber oF leaVeS] = [lengTH oPen]


[lengTH/27”] X [2] + [2 SiDeS] + [2 arMS] = nUMber oF CHairS (oPen)

+ =

To see the Jonathan Charles’ chair gallery, please visit www.jonathancharles.com



Contemporary styled circular centre table, the top and pedestal veneered in decorative hyedua woods with distinct geometric grain, mounted with sleek brass details.

A

B

C

as seen # 494953name hyedua Wood circular centre table

Dimensions 40 x 40 x 30 inches(W x D x H) 101.6 x 101.6 x 76.2 cmtoP & base Finish A + B Daniella light Finish (Fin-Dal-01-1)trim Finish C brass brown light (Fin-bra-09-1)sheen 40 JC Satin

customiZe your selection

1. shaPe

2. Dimension CHooSe YoUrS

3. toP & baseFinish a + b

a

b

4. trim Finish

C

5. moulDing

MoUlDing (M11) MoUlDing (M12)

6. corner

7. sheen•20 •40 60 •80 •20 SaTin (CoUnTrY PainTeD FiniSHeS onlY) •40 JC SaTin

•80 JC HigH SHeen

8. laDy susan

(lQ8)

(lQ4) (lQ7)(lQ6)(lQ5)

(W28)(W24) (W26)(W25)(W20)(W19) (W22)(W21)(W15) (W18)(W17)(W16) (W23) (W27)

(W14)(W10) (W12)(W11)(W6)(W5) (W8)(W7)(W1) (W4)(W3)(W2) (W9) (W13)

(lQ3)(W34)(W33) (lQ1)(W35)(W29) (W32)(W31)(W30) (lQ2)

FiXeD SQUare (SH1)

FiXeD roUnD (SH2)

FiXeD oVal (SH3)


baSe onlY (b27)

SHaPe 1 (C1) SHaPe 3 (C2) SHaPe 3 (C3) SHaPe 4 (C4) SHaPe 5 (C5) SHaPe 7 (C7)

DiaMeTer Ø (inCH or CM) laZY SUSan (inCH or CM)

D 40”D 102 CM

D 110”D 279 CM

D 16” D 41 CM

D 64”D 163 CM

braSS (br1) niCKel (br2) bronZe (br3)

A

B

Italian classically inspired 42 inches round breakfast table, the clean lines with gilded finish and antiqued mirrored top set above tapering iron legs.

as seen # 494067name italian gilded breakfast table

Dimensions 42 x 42 x 30 ¼ inches(W x D x H) 106.6 x 106.6 x 76.7 cmbase Finish B gilded iron (Fin-Pai-21)toP Finish A glass antiqued Mirror (Fin-egl-07)


1. shaPe


3. base Finish

b gilDeD iron (ir1) SilVer iron (ir2) bronZe iron (ir3)

4. toP Finish

a

5. moulDing

MoUlDing (M15)

6. corner

FiXeD SQUare (SH1)

FiXeD roUnD (SH2)

FiXeD oVal (SH3)


baSe onlY (b36)

(gl3)(gl2)(gl1)(lQ8)

(lQ4) (lQ7)(lQ6)(lQ5)

(W28)(W24) (W26)(W25)(W20)(W19) (W22)(W21)(W15) (W18)(W17)(W16) (W23) (W27)

(W14)(W10) (W12)(W11)(W6)(W5) (W8)(W7)(W1) (W4)(W3)(W2) (W9) (W13)

(lQ3)(W34)(W33) (lQ1)(W35)(W29) (W32)(W31)(W30) (lQ2)

SHaPe 1 (C1) SHaPe 3 (C3) SHaPe 4 (C4) SHaPe 5 (C5) SHaPe 7 (C7)



as seen # 494566name stepped gilded circular dining table

Dimensions 48 x 48 x 30 inches(W x D x H) 122 x 122 x 76.2 cmbase Finish B ebonised (Fin-Pai-20)toP Finish A Plain glassPost gilDing H3 antique gold-leaf light (Fin-Pai-04-1)

Circular black rub-through lacquer and gilded dining table with a glass top, the recessed centre creating a sense of depth and a contemporary feel. Inspired by Modernist designs of the 1930’s. Available without glass top - 494825.

a

B

H3


1. shaPe

2. Dimension CHooSe YoUrS (The glass thickness is 19mm max. Glass top dimension is limited to 32-72 inches only)

3. base Finish

b

4. toP Finish

a(gl1)

5. Post gilDing

H3 golD leaF (gi1) SilVer leaF (gi2)

6. corner

FiXeD SQUare (SH1)

FiXeD roUnD (SH2)

FiXeD oVal (SH3)


baSe onlY (b32)


(lQ8)

(lQ4) (lQ7)(lQ6)(lQ5)

(W28)(W24) (W26)(W25)(W20)(W19) (W22)(W21)(W15) (W18)(W17)(W16) (W23) (W27)

(W14)(W10) (W12)(W11)(W6)(W5) (W8)(W7)(W1) (W4)(W3)(W2) (W9) (W13)

(lQ3)(W34)(W33) (lQ1)(W35)(W29) (W32)(W31)(W30) (lQ2)

B

A

Contemporary wrought iron centre table with distressed gilded finish and hand painted gold borders to the églomisé glass circular top and undertier. Available in Bronze, Gold & Silver.

as seen # 494960name transitional gilded centre table

Dimensions 48 x 48 x 30 inches(W x D x H) 122 x 122 x 76.2 cmbase Finish B gilded iron (Fin-Pai-21)toP Finish A eglomise (Fin-egl-04)


1. shaPe


3. base Finish


4. toP Finish

a

5. corner

(gl3)(gl2)(gl1)(lQ8)

(lQ4) (lQ7)(lQ6)(lQ5)

(W28)(W24) (W26)(W25)(W20)(W19) (W22)(W21)(W15) (W18)(W17)(W16) (W23) (W27)

(W14)(W10) (W12)(W11)(W6)(W5) (W8)(W7)(W1) (W4)(W3)(W2) (W9) (W13)

(lQ3)(W34)(W33) (lQ1)(W35)(W29) (W32)(W31)(W30) (lQ2)


FiXeD SQUare (SH1)

FiXeD roUnD (SH2)

FiXeD oVal (SH3)


baSe onlY (b28)



B

A

A

as seen # 494574name art Deco high lustre round Dining table

Dimensions 54 x 54 x 30 inches(W x D x H) 137.2 x 137.2 x 76.2 cmbase Finish B ebonised (Fin-Pai-20)toP Finish A Santos rosewood High lustre (Fin-Sae-02)sheen 80 JC High Sheen

Art Deco style round dining table in a high lustre santos rosewood finish with ebonised legs.


1. shaPe


3. toP & base Finish a + b

a

b

4. moulDing MoUlDing (M10)

5. corner


•80 JC HigH SHeen

7. laDy susan

● If you have selected the leaf type (drop-in), please select the leaf size and the number of leaves (page 10). If you would like another leaf size, simply note your inquiry on the summary page.

FiXeD SQUare (SH1)

FiXeD roUnD (SH2)

FiXeD oVal (SH3)


roUnD-To-roUnD(DroP-in) (SH5)

roUnD-To-oVal(DroP-in) (SH7)

reCTangUlar(DroP-in) (SH9)

baSe onlY (b30)

(lQ8)

(lQ4) (lQ7)(lQ6)(lQ5)

(W28)(W24) (W26)(W25)(W20)(W19) (W22)(W21)(W15) (W18)(W17)(W16) (W23) (W27)

(W14)(W10) (W12)(W11)(W6)(W5) (W8)(W7)(W1) (W4)(W3)(W2) (W9) (W13)

(lQ3)(W34)(W33) (lQ1)(W35)(W29) (W32)(W31)(W30) (lQ2)


D 40”D 102 CM

D 110”D 279 CM

D 16” D 41 CM

D 64”D 163 CM


A

B

Contemporary styled dining table with an antiqued gilded frame of undulating intersecting threads to form an open column, topped with a plain glass circular top.

as seen # 494568name interlaced gilded & glass Dining table

Dimensions 48 x 48 x 30 inches(W x D x H) 122 x 122 x 76.5 cmbase Finish B gilded iron (Fin-Pai-21)toP Finish A Plain glass


1. shaPe


3. base Finish


4. toP Finish

a(gl1)

5. corner

FiXeD SQUare (SH1)

FiXeD roUnD (SH2)

FiXeD oVal (SH3)


baSe onlY (b29)




B

A

A

as seen # 494777name hyedua circular Dining table

Dimensions 72 x 72 x 30 inches(W x D x H) 183 x 183 x 76 cmtoP & base Finish A + B Daniella light Finish (Fin-Dal-01-1)sheen 40 JC Satin

Contemporary styled circular dining table with in-built lazy susan, veneered in decorative hyedua with a raised brass inlay detail, set on elegant curved supports terminating in brass caps.


1. shaPe



a

b

4. moulDing

5. corner


•80 JC HigH SHeen

7. laDy susan

(lQ8)

(lQ4) (lQ7)(lQ6)(lQ5)

(W28)(W24) (W26)(W25)(W20)(W19) (W22)(W21)(W15) (W18)(W17)(W16) (W23) (W27)

(W14)(W10) (W12)(W11)(W6)(W5) (W8)(W7)(W1) (W4)(W3)(W2) (W9) (W13)

(lQ3)(W34)(W33) (lQ1)(W35)(W29) (W32)(W31)(W30) (lQ2)


D 40”D 102 CM

D 110”D 279 CM

D 16” D 41 CM

D 64”D 163 CM

SHaPe 1 (C1) SHaPe 3 (C2) SHaPe 3 (C3) SHaPe 4 (C4) SHaPe 5 (C5) SHaPe 5 (C6) SHaPe 7 (C7)

FiXeD SQUare (SH1)

FiXeD roUnD (SH2)

FiXeD oVal (SH3)


roUnD-To-roUnD(DroP-in) (SH5)

roUnD-To-oVal(DroP-in) (SH7)


baSe onlY (b31)

MoUlDing (M11) MoUlDing (M12)


B

A

Contemporary round dining table with a lightly distressed top in Camden Walnut, standing on a pedestal column with geometric triangle shape details.

as seen # 495387name contemporary round Dining table

Dimensions 60 x 60 x 30 inches(W x D x H) 152.4 x 152.4 x 76.5 cmtoP & base Finish A + B

Camden Walnut (Fin-Wal-18-1)


1. shaPe



a

b

4. moulDing(M17)

5. corner

6. sheen•20 •40 60 •80 •20 CoUnTrY PainTeD FiniSHeS •40 JC DeFaUlT SaTin SHeen

•80 JC DeFaUlT HigH SHeen

7. laDy susan

FiXeD SQUare (SH1)

FiXeD roUnD (SH2)

FiXeD oVal (SH3)


roUnD-To-roUnD (DroP-in) (SH5)

roUnD-To-oVal (DroP-in) (SH7)


baSe onlY (b40)

(lQ8)

(lQ4) (lQ7)(lQ6)(lQ5)

(W28)(W24) (W26)(W25)(W20)(W19) (W22)(W21)(W15) (W18)(W17)(W16) (W23) (W27)

(W14)(W10) (W12)(W11)(W6)(W5) (W8)(W7)(W1) (W4)(W3)(W2) (W9) (W13)

(lQ3)(W34)(W33) (lQ1)(W35)(W29) (W32)(W31)(W30) (lQ2)


D 40”D 102 CM

D 110”D 279 CM

D 16” D 41 CM

D 64”D 163 CM





A

B

Glass top dining table with a stainless steel base and a fine feather inlaid top.

as seen # 495346name Feather inlay glass top Dining table

Dimensions 60 x 60 x 30 ¼ inches(W x D x H) 152.5 x 152.5 x 76.6 cmbase Finish B Polished Stainless Steel High Sheen

(Fin-STP-01-1)toP Finish A Plain glass


1. shaPe


3. base Finish

b niCKel (br2)

4. toP Finish

a(gl1)

5. corner

FiXeD SQUare (SH1)

FiXeD roUnD (SH2)

FiXeD oVal (SH3)


baSe onlY (b38)


Multi metals of all colors intersect into a classic plaid to for the base of a glass top centre table.

as seen # 495403name multi metal round Plaid centre table

Dimensions 42 x 42 x 30 inches(W x D x H) 106.6 x 106.6 x 76.2 cmbase Finish B light antique Silver (Fin-Pai-26-1)toP Finish A Plain glass


1. shaPe


3. base Finish

b MUlTi ironS (ir4)

4. toP Finish

a(gl1)

5. corner

A

B

FiXeD SQUare (SH1)

FiXeD roUnD (SH2)

FiXeD oVal (SH3)


baSe onlY (b39)




A geometric metal base with a beautiful chinoiserie etched brass top detail that can be seen through the plain glass top.

as seen # 500347name Fusion chinoiserie antique etched brass

Dining table

Dimensions 48 x 48 x 30 inches(W x D x H) 122 x 122 x 76.2 cmbase Finish B brass Stainless Steel (Fin-bra-22-1)base toP Detail C antique etched brass (Fin-bra-62-1)toP Finish A Plain glass


1. shaPe


3. base toP material C

4. base Finish

5. base toP Detail C

6. toP Finish

a(gl1)

7. cornerSHaPe 1 (C1) SHaPe 3 (C3) SHaPe 4 (C4) SHaPe 5 (C5) SHaPe 7 (C7)

(bT8)(bT6) (bT7)(bT5)(bT1) (bT3)(bT2) (bT4)

(Wi1) (Wi3)(Wi2) (Wi4) (Ma1) (Ma3)(Ma2) (Ma4)

(e5)(e1) (e3)(e2) (e4) (le5)(le1) (le3)(le2) (le4)

(Sg5)(Sg1) (Sg3)(Sg2) (Sg4) (lQ13)(lQ9) (lQ11)(lQ10) (lQ12)

PoliSHeD STainleSS STeel (SS1) braSS FiniSH STeel (SS2) bronZe STainleSS STeel (SS3)b

● If your selection is from BT3 to BT8, please choose base top detail in the next step

bt3

bt4

bt5

FiXeD SQUare (SH1)

FiXeD roUnD (SH2)

FiXeD oVal (SH3)


baSe onlY (b42)

bt6

bt7

bt8

A

B

C

●


b

a

stePs enter reference code or circle below

1 SH/b

2 inch/cm

3 ir

4 W/lQ/gl

# 494566 5 C

b

a


1 SH/b

2 inch/cm

3 ir

4 gl

# 494568 5 C

a

b


1 SH/b

2 inch/cm

3 W/lQ

4 gl

5 gi

# 494566 6 C

b

a


1 SH/b

2 inch/cm

3 ir

4 W/lQ/gl

5 M

# 494067 6 C

summaryPlease re-enter all reference code selections in the boxes below, once you have completed the steps.

Tear off this page to fax or scan and email to us.

b

a

a


1 SH/b

2 inch/cm

3a W/lQ

b W/lQ

4 M

5 C

6 20 40 60 80

# 494574 7 lZ inch/cm

b

a


1 SH/b

2 inch/cm

3a W/lQ

b W/lQ

4 M

5 C

6 20 40 60 80

# 494777 7 lZ inch/cm

b

a


1 SH/b

2 inch/cm

3 br

4 gl

# 495346 5 C

a

b

C


1 SH/b

2 inch/cm

3 bT

4 SS

5 Wi/e/Sg/Ma/le/lQ

6 gl

# 500347 7 C

b

a


1 SH/b

2 inch/cm

3 ir

4 gl

# 495403 5 C

a

b

C

STePS enter reference code or circle below

1 SH/b

2 inch/cm

3a W/lQ

b W/lQ

4 br

5 M

6 C

7 20 40 60 80

# 494953 8 lZ inch/cm

b

a

STePS enter reference code or circle below

1 SH/b

2 inch/cm

3a W/lQ

b W/lQ

4 M

5 C

6 20 40 60 80

# 495387 7 lZ inch/cm

if you have multiple choices in step 1 (shape), please enter codes as shown: SH1, 2, 3, 4, 5, 7, 9.... or base only b29, 31, 32, 33,...

With the goal to satisfy our customers, we are expanding the transitional custom dining program to bring you more choices. We invite you to recommend new shapes, veneers, bases which you desire to have in your transitional dining table. all requests or comments, please send email to:

contact

usa & canaDaT +1 252 446 3266 | F +1 252 977 [email protected]

euroPeT +44 114 245 2777 | F +44 114 245 6411 [email protected]

other [email protected]



enter your inFormation & senD us your comments

YoUr naMe

CoMPanY naMe

aCCoUnT #

YoUr SaleS reP

PHone #

e-Mail

aDDreSS

ZiP CoDe

Po boX

if you have any comments or queries, please clearly note them below:

Scan code to view the website

a must haVe tool When Presenting to your customers

traDe only - register to get starteD!To get started, you must login. With Trade access you will have access to JC’s main web catalogue and the table creator. once you have applied for Trade access our sales representative will approve you within 24 hours.

CreaTe online

We haVe laiD out 10 stePs For you.each steP incluDes a reFerence coDe, e.g st 1.

Select the option you wish

note the reference code in the marked area

Fill in all the steps on the summary page

Fill in your contact information and any special comments

Finally tear off and send the summary sheet to us by email or fax

Can’t find the options you want listed?

Please feel free to send us the information and an image or sketch of your custom creation!

2

3

4

5

1

CreaTe oFFline

geT a DigiTal broCHUre & geT STarTeD!



www.customdining. jonathancharles.com

ConTaCT US

USa & CanaDaT +1 252 446 3266 | F +1 252 977 [email protected]

eUroPe T +44 114 245 2777 | F +44 114 245 6411 [email protected]

oTHer CoUnTrieS [email protected]

Documents

The Traditionalcustomdining.jonathancharlesfurniture.com/pdf/CDP... · Jonathan Charles’ account (trade only), if assistance is needed, please contact your sales representative