• The SmartDispenser™ comes ready to integrate with a AND AD4212B-102 Analytical Weighing Sensor.

AirFree Platform. Closed-Loop Process Control

• Perform a capabilities study with the weighting sensor before production and use the data to find the target weight and +/- tolerances of the SmartDispenser™ with your assembly fluid.

• Dispense a full syringe allowing the SmartDispenser™ to automatically record weights.

• The statistical mean of the data is your target weight.

• The statistical standard deviation is your +/- tolerance.

• The SmartDispenser™ authorized administrator activates the scale feature and inputs the target weight and +/- tolerance percentage into the dispenser program.

• Dispense onto the scale allowing the SmartDispenser™ to read the dispense weight after each dispense. If dispense is out of tolerance a warning message appears stopping the SD until cleared.

• Actual weight dispensed and number of stops are recorded in an Excel spreadsheet for post production statistical analysis and costing.

• Reports can be accessed by any authorized SD administrator worldwide.

AirFree Platform. Closed-Loop Process Control

Production Data in Excel• 24, 7 day and 30 day machine cycles (one fluid dispense)

• All programs stored in the SmartDispenser™

• The program used for the last 500 dispenses verifying the proper program was used.