TC

L 4

31R

TCL 431R Radial Tracked

Conveyer

Heavy duty 1.8 metre (5.9ft) tracks for site movement

1000mm (39”) wide incline belt - 31metre (101ft) length conveyor

Heavy duty radial undercar-riage

Impact centre rollers at feed point

CAT 75.4 kw Diesel hydraulic engine for tracks and conveyor belt

Hydraulic raised/lowered tail section for varied feed in heights

Hydraulic raised/lowered incline conveyor and head section

Hydraulic folding head section for ease of transport

THE POWER TO MOVE MATERIALS

Hexagonal feedboot (Optional bolt in liners) 1.8metre (5.9ft) - 400mm Shoe Tracks

Internal hydraulic wheel drives (Radial) 31m (101ft) Heavy duty lattice conveyor design

TC

L 4

31 R

THE POWER TO MOVE MATERIALS +44 (0)28 8225 1100 info@telestack.com www.telestack.com

Larger stockpile potential over a standard non radial unit

Typical set up time under 10 minutes

Multifunctional unit for feeding Telestack equipment, stockpiling, barge-loading and reclaiming

Production rates of up to 400tph

Hydraulic tail section height adjustment, whilst at the same time maintaining head drum height, ensuring maximum stockpile capacity.

Eliminate double handling of material.

Fully mobile independent unit electric motor driven (Dual Power Optional)

TYPICAL APPLICATIONS

Stockpiling from secondary crushers and screeners

Stockpiling crushed stone, mineral ores, sand and gravel

Building stockpile in ware-houses

Loading vessels / barges

Feeding auxiliary Telestack equipment

Feeding fixed equipment

Discharging onto overland conveyor systems

Mobile reclaim hopper for stacker/re-claimer belt

Stockpiling construction and demolition waste, top soil, coal, grain etc

KEY BENEFITS