THE PHAROS LED BOLLARD

The Pharos LED Bollard

Developments in LED technology enable far more flexibility and creativity for lighting within street furniture than was previously possible. The Pharos LED bollard product allows designers to integrate lighting that enhances the surroundings and promotes a safe atmosphere across parks and campus environments. The lower level lighting offered by the Pharos LED bollard works as an enhancement to traditional street lighting.

Ideally suited for lighting paths, pedestrian walkways and parks, integrated LED lighting in bollards can work as an architectural feature, enhancing available space as well as lighting the way.

The Pharos range of LED bollards offers ‘fit and forget’ reliability that can last several decades. The luminaires are IP66 LEDSAFE, with a sealed optic and an integral internal driver, delivering reliability and protection against the elements for the whole lifetime of the product. Designed to be extremely robust and vandal resistant, the Pharos boasts IK10 impact resistance, meaning that both the luminaires and the bollards themselves will resist minor bumps to major impacts. For high risk areas, the Pharos can be further enhanced with embellishments affording additional vandal resistance.

A further benefit of the Pharos is the ease of customisation. Whilst the original product looks great and works extremely well, embellishments such as a brushed stainless steel finish with bespoke laser cut logos can be easily added. 8 LEDs totalling 11 watts are encased in each bollard offering extremely clear and clean white lighting around the whole bollard.

As the Pharos range comes from Urbis Schréder, the global leader in LED lighting solutions, with a track record built over more than 35 years, you can be assured that your lighting solution will combine great design and high levels of reliability for many years to come.

Urbis Schréder – lighting the future.

Key Features and Product Advantages

• IP66 LEDSAFE® sealed head (optic) assembly with integral LED driver

• IK10 impact resistance and real-world vandal resistant design

• UV stable polycarbonate protector with option for diffused or transparent finish

• Can give both a decorative and functional aesthetic with just a few changes in material, finish and embellishments

• Embellishments can be either:

> Decorative, e.g. brushed stainless steel with bespoke laser-cut logo or design etc

> Functional e.g. additional vandal resistance, or as a

light mask/shield

• 8 LED 11W optic with symmetric and asymmetric variants

• Asymmetric variant with Lensoflex®2 optics designed to maximise performance and spacing whilst minimising glare

> Photometry designed to achieve S and P lighting classes from (BS EN 13201-2:2003)

> Example: When positioned at the edge of a 2m wide footpath, a 12.5m spacing is achievable when lighting to class S3/P3

> A larger spacing can be achieved with various set-back distances from the path edge

• Symmetric version with diffused protector designed for way-marking and lighting parks and gardens. This configuration will also give good vertical illuminance on pedestrian walkways and cycle paths

• Wide ambient operating temperature range -40°C to +55°C @ 350mA

270

100

0

224

300

3

00

350

220 PCD

GROUND LEVEL

FLANGE MOUNTED ROOT MOUNTED

PHOTOMETRY

TYPICAL RESULT AT 12.5M SPACING

REAL WORLD VANDAL RESISTANCE

Although the bollard is rated to IK10, it has also been designed and tested for ‘real world’ vandal resistance. The robust construction method and shatterproof polycarbonate protector ensures that the Pharos bollard can withstand almost anything!

PHAROS BOLLARD ASYMMETRIC CLEAR PROTECTOR MATRIX 356012

PHAROS BOLLARD SYMMETRIC DIFFUSED PROTECTOR MATRIX 356004

Isolux Diagram Polar Diagram

Isolux Diagram Polar Diagram

12.5m

2m

LIGHTING LEVELS ACHIEVED IS AS FOLLOWS: Lighting Class P3

Path Width 2m 3m

Eav 8.62 7.32

Emin 1.59 1.73

LIGHTING LEVELS

min

av

LED BOLLARD - OPTIC MOUNTING SYSTEM

Sealed optic assembly is integrated into the bollard base from above and tightened through the door, leaving no external visible fixings.

The head mounting system allows full 360° of adjustability, so the orientation and therefore light distribution can be finely tuned on site.

Welded internal mounting ring

Mounting bar

APPLICATIONS

• Parks and gardens

• Cycle paths

• Pedestrian walkways

• Industrial walkways

• Entrances

• Parking areas

• Way-finding and markers

• Vehicular access restriction

KEY FEATURES

• Distinctive design

• High performance LED photometry

• Low glare

• Low power

• Low maintenance

• On-site adjustability

• Robust, vandal resistant design

• Ingress protection – IP66

• Impact resistance – IK10

• Available in various colours

OPTIC ASSEMBLY

The bollard optic assembly is constructed of cast aluminium, and has been designed to give as short a thermal path as possible from the LEDs to the surrounding air. This ensures the LEDs are kept as cool as possible, optimising their performance ensuring long life and high LED lumen maintenance.

FUTUREPROOF

The optic assembly is serviceable, but can also be easily replaced by unbolting it through the bollard door. This means the bollard optic can be upgraded in the future without disturbing the groundworks.

LEDSAFE®

To maximize the reliability of the LEDs, the optic is sealed to IP66. This ensures that the photometric performance is maintained over time.

Optic tightness level: IP66Impact resistance: IK10Nominal voltage: 230V – 50HzElectrical insulation class: I (Class II available on request)Power consumption @ 350mA: 11WColour temperature (Standard): Neutral White Weight: 22kgUMSUG code 41 0011 0000 100Colour (standard): AKZO grey 900Surge protection: 10kVOperating temp range: -40°C to +55°C @350mA

TECHNICAL SPECIFICATION

Mount Type Protector Distribution Order code

ROOTCLEAR

ASYM PHAROS 1SYM PHAROS 2

FROSTEDASYM PHAROS 3SYM PHAROS 4

FLANGECLEAR

ASYM PHAROS 5SYM PHAROS 6

FROSTEDASYM PHAROS 7SYM PHAROS 8

STANDARD OPTIONS TABLE

(Class I, Neutral White, AKZO Grey 900 without embellishments)

270

100

0

224

300

3

00

350

220 PCD

GROUND LEVEL

FLANGE MOUNTED ROOT MOUNTED

MOUNTING OPTIONS

PHOTOMETRIC LIGHT ENGINE

• 8 LED 11W with symmetric and asymmetric variants

• Asymmetric variant with Lensoflex®2 optics designed to maximise performance and spacing whist minimising glare.

> Photometry designed to achieve S and P lighting classes from (BS EN 13201-2:2003)

> Example: When positioned at the edge of a 2m wide footpath, a 12.5m spacing is achievable when lighting to class S3/P3

> A larger spacing can be achieved with various set-back distances from the path edge.

• Symmetric version with diffused protector designed for way-marking, and lighting parks and gardens. This configuration will also give good vertical illuminance on pedestrian walkways and cycle paths.

Other options available on request - please enquire

Powder coated galvanised steel base with flush fitting door, flange and root mounting options available as standard.

Copy

righ

t © U

rbis

Sch

réde

r Ltd

201

4. T

he in

form

atio

n, d

escr

ipti

ons

and

illus

trat

ions

her

ein

are

of o

nly

an in

dica

tive

nat

ure.

Due

to a

dvan

ced

deve

lopm

ents

, we

may

requ

ire

to a

lter

the

char

acte

rist

ics

of o

ur p

rodu

cts

wit

hout

no

tice

. As

thes

e m

ay p

rese

nt d

iffer

ent c

hara

cter

isti

cs a

ccor

ding

to th

e re

quir

emen

ts o

f ind

ivid

ual c

ount

ries

, we

invi

te y

ou to

con

sult

us.

Urbis Schréder Ltd

Sapphire House | Lime Tree Way

Hampshire International Business Park | Chineham

Basingstoke | RG24 8GG

T +44 (0) 1256 354446 | F +44 (0) 1256 841314

E sales@urbis-schreder.com | W www.urbis-schreder.com

THE PHAROS LED BOLLARD

06/1

5