WORKSHOP EQUIPMENT

THE OPTIMUM SOLUTION

ww

w.c

hri

s-m

arin

e.co

m

SUPERIOR ENGINE CARE SOLUTIONS FOR WORKSHOPS

CONTENTS

The Optimum Solution for WorkshopsChris-Marine® & IOP Marine offer our diesel or gas-engine service customers complete machine and test solutions for their workshops, giving you the opportunity of fully equipping and servicing your diesel or gas-engine machine maintenance system by one global supplier.

We are continuously developing new solutions, products and specialist services worldwide to support equipment for small, medium and large workshops.

Application Area Product 2-stroke 4-stroke

Cleaning Equipment

Spray Washing Machines SWM X X

Ultrasonic Cleaners USC 4600 X X

Spindles & Seat Maintenance

Valve spindle grinding BSP 30 X

Valve seat & recess machining VRL X

Valve seat machining VSL X

Working Rig WR X X

Valve seat removal MPI X

Cylinder Liner Maintenance

Loosening of bolts HPU X X

Wear edge removal VKS X

Honing or deglazing HON X X

Wave grinding WGM X

Surface roughness measurement SRM X X

Sealing Surface Maintenance

Sealing surface grinding CPM X

Sealing surface grinding CPL X

Sealing surface machining PSL X

Fuel Injector Testing

Fuel injector test unit VPA X X

Universal valve holder UVH X

Electronic injector testing MPT X

Fuel Pump Maintenance

Fuel pump testing FPT X

Fuel pump grinding FPG X

Training and Education TSA X X

Approved & Recommended by

major engine designers:

CLEANING EQUIPMENT

Superior Engine Parts Cleaning

HEAVY DUTY SPRAY WASHING - SWM

The Ultrasonic cleaning system offers a solution to the cleaning requirements of both power generation and marine industries.

With the patented frequency sweep maximizes the ultrasonic efficiency, and helps to reduce the cleaning time, thus saving both time and money as a result of the fast and efficient cleaning.

Suitable for cleaning of engine parts such as:• heat exchangers• intercoolers• valve spindles• fuel injectors

Front loading single stage aqua spray washers for aqueous cleaning of small and medium sized components, when a single stage heated cleaning process is enough to fulfill the cleanliness requirements.

The spray wash machines provide excellent cleaning results thanks to a smart design used together with high spray pressures and liquid flow rates achieved by the built in pump.

The spray system rotates around a fixed load giving a perfect cleaning result together with a very easy loading- and unloading system.

As an extra feature, the SWM can be used for heating up engine parts, e.g. covers before welding, heat shrinking etc.

PATENTED TECHNOLOGY FOR MAXIMUM ULTRASONIC EFFICIENCY

In order to work effectively on engine parts, they need to be thoroughly cleaned to remove scale, oil deposits and rust.

To meet the increasing need for suitable washing solutions, IOP Marine & Chris-Marine have introduced both single stage aqua spray washers for overall cleaning of engine parts as well as advanced ultrasonic cleaners that will reach every orifice.

ULTRASONIC 4600

Suitable for cleaning of: • pistons • cylinder heads • valve spindles • fuel injectors

Today’s diesel engines are exposed to significant loads, and it is therefore im-portant that the valves and valve seats’ sealing surfaces are carefully rectified to provide a tight seal.

At Chris-Marine, our continuous cooperation with companies such as MAN and Wärtsilä results in customized solutions that ensure quality performance for both large and small workshops.

Designed for the grinding of valves and valve seats on high and medium-speed diesel engines, the valve grinding machines are easy to use and features anti-vibration mountings as well as a self-centering systemt to ensure that both valves and valve seats can be easily set up and maintained to the finest ground tolerances with minimal material removal. The machines can be supplied with multiple angles customized for different engine types.

The BSP is an electrically driven machine for grinding of valve spin-dles on high and medium speed diesel engines.

The machine is available in semi- or fully automatic versions and comes delivered with precision settings for required grinding angles and can also be adjusted by the operator.

Optimize valve seats and spindles

PRECISE GRINDING OF VALVES AND SEATS

AUTOMATIC VALVE SPINDLE GRINDING - BSP 30

SPINDLES & SEATS

SPINDLES & SEATS

COMBINED MACHINING - VRLA combined machine for in-situ machining of valve seats and seat recesses on medium speed diesel engines.• Time saving on site machining.• Precision machining of seat locations.• Unique tool for optimal cost-efficiency.• Compact machine fits most cylinder heads.

The working rig comes in 8 configurations, ranging in capacity from 300 kgs all the way up to 2600 kgs so as to be useful for all sizes and shapes of exhaust valve cages and cylinder covers.

The WR is safe and efficient with a self locking turning gear and facilitates a multitude of maintenance operations, particularly when operating a valve seat grinding machine.

The WR can be turned 360o and enables you to perform easy and safe overhauls.

REMOVE VALVE SEATS WITH THE MPI

We recommend the MPI (Multi Purpose Induction heat-ing tool) for easy removal of valve seats.

The MPI unit generates heat directly in metal objects.It is very precise and there is no open flame with noxious gasses, soot or heat loss to the surroundings.

For use in several different applications

FACILITATE OVERHAUL WORK WITH THE WORKING RIG

IN-SITU MACHINING - VSL

For in-situ machining of valve seats• Up to 6 times faster than traditional grinding machines• Delivered with preset angles for absolute accuracy• Simple to use• Eliminates the risk of mistakes

Restore cylinder liner condition to engine makers specifications

The operating conditions of marine propulsion engines frequently result in increased liner wear and seized and broken piston rings, however cylinder liner surface imper-fections caused in this environment can be rectified and prevented by regular honing.

By using Chris-Marine’s specially designed equipment, you can significantly reduce your customers’ cyliner liner wear and thereby increase the service life of both liners and piston rings.

Typically, the customer should be offered honing of their liners during piston ring replacement, and other cases of dissambling the engine.

BENEFITS OF LINER MAINTENANCE

Major problems of ovality and scuffing at the upper part in the liners can be rectified by regular honing.

The honing machine, HON S, generates a criss-cross surface pattern consistent with the engine builders’ recommendations, thus considerably improving the “wearing-in” of new piston rings and markedly reducing the lub-oil consumption.

CLEVER INVESTMENT

When investing in a cylinder liner maintenance machine from Chris-Marine, we will guide you towards the correct honing heads and shafts, the different ceramic stones for coarse and plate honing and the correct gearbox for you to achieve the optimal cross pattern, as well as all other necesessary accessories for the specified engine models.

Furthermore, we can offer your engineers training, so they can perform honing according to engine makers specifications.

CYLINDER LINER MAINTENANCE

Step-by-Step procedure for cylinder liner maintenance

LOOSEN THE BOLTS WITH HPUBy using our reliable Hydraulic Power Units (HPU) with hoses and couplings you will loosen the stud bolts fast, efficiently and in a safe way.The HPUs are available in workshop editions up to 3000 bar.

HONE OR DEGLAZE TO RESTORE THE LINER - HONUse the deglazing and honing machine HON S or X to improve the liner geometry restoring the circular shape and perfect running condition in accordance with the engine makers specification.

VERIFY CORRECT SURFACE PROFILE WITH SRMDuring the honing operation, we strongly recommend our Surface Roughness Measuring device to measure the liner in order for you to be well aware of the condition during and after the operation.

By using the device frequently, you will avoid removing more material than needed, and know when you have achieved the correct surface profile according to the engine manufacturer’s specification.

Recording can be used for documentation towards your customer in the service report.

REMOVE WEAR EDGES WITH VKSFor safe and fast removal of wear edges, we recommend the portable wear edge milling machine VKS that shortens piston pulling time and saves piston rings and liner.

CREATE A SUPERIOR SURFACE WITH WGMThis machine has been specifically developed to provide cylinder liners with a tribologically superior surface known as wavecut pattern, allowing for better lubrication and reduced attrition.

Due to the mounting adapters on top of the machine it is self-centering, highly stable and accurate.

CYLINDER LINER MAINTENANCE

The honing rig fits all workshops and has been specifically developed for honing cylinder liners out of the engine. It has a robust and compact design and provides the optimal platform for the honing of cylinder liners.

For workshop use, we recommend using the automatic stroke and honing rig.

HONING RIG

SEALING SURFACES

Eliminate Troublesome water & gas leaksWater and gas leakages can be repaired with the our surface grinding equipment which can restore the sealing surface according to the engine makers’ specifications.

The machines are versatile and flexible for surfaces that require the highest pre-cision. They are portable allowing for cost savings by in-situ grinding, and are easy to use.

For grinding of sealing surfaces between cylinder head and cylinder liner and between cylinder liner and engine frame on slow and medium bore diesel engines.

The air motor driven CPM machine is ideal for in-situ grinding and milling of cylinder heads, liners and engine blocks.

SEALING SURFACE GRINDING - CPLFor grinding of sealing surfaces between cylinder head and cylinder liner and between cylinder liner and engine frame on small and medium bore diesel engines.

The manually driven CPL machine will bring about great savings from in-situ grinding and milling of cylin-der heads, liners and engine blocks.

The machine can also be used for grinding of sealing surface between piston crown and piston skirt.

SEALING SURFACE GRINDING - CPM

SEALING SURFACE MACHINING - PSL

For machining of sealing surfaces between cylinder head and cylinder liner as well between cylinder head and engine frame on small bore diesel engines.

• Easily operated by one man• For onboard and on shore workshops• Operating range up to 260 mm bore diameter• Versatile• Fast and accurate• Designed for both inside and outside machining• Stepless adjustable feed and machining speed• Electrically driven

Injector maintenance with documentation for your customersOverhaul your customers’ fuel injectors according to engine builders’ specifications! Due to a long cooperation with all major engine makers, IOP Marine injector testing equip-ment provides the OEM solution to optimize injector performance.

PATENTED SAFE-TEST TECHNOLOGYThe IOP Marine Injector SafeTest technology developed for correct testing of slide-valve fuel injectors has evolved into a new generation of digital fuel injector testers designed for easier and more efficient maintenance of 2- and 4-stroke engine fuel injectors.

The guiding system ensures a much easier way to verify details critical to the actual injector performance and documents the performance of the overhauled injector.

FUEL INJECTOR TEST UNIT - VPA• Touch panel for easy and fast operation• Step-by-step test procedure allows testing of all 2- and 4-stroke fuel valves, incl. MAN Diesel slide valves.• Pre-set required values to be more operator independent• Max. and min. values to determine whether an injector passed or failed the test.• Built in printer minimizing the risk of errors by ensuring full documentation• Test reports stored in permanent memory or transferred to PC via USB. The information can therefore be used electronically as documentation.

FREESTANDING VALVE HOLDER - UVHUser-friendly freestanding Universal Valve Holder with 5 operating positions and adapters for fuel injectors in all common 4-stroke injectors.

ELECTRONIC INJECTOR TESTING - MPT

The MPT is a fuel injector test rig accessory that enables testing and activation of electronic fuel injectors / pilot valves in larger 2- and 4-stroke engines

INJECTOR TESTING

Ensure Optimal Fuel Pump Performance

ADVANCED FUEL PUMP TESTING - FPT

• Pneumatic test method - does not require a large setup.• Accurate, reproducible and well documented determination of pump condition.• Automated test sequence for each pump type.• No disassembly necessary before testing.• No cleaning necessary after testing.• Data reports generated automatically, available in MS Excel format for further processing.• Pump manufacturer independent.• Adapters can be made for most 4-stroke engine fuel-pumps.

HIGH QUALITY FUEL PUMP GRINDING - FPG

The Chris-Marine FPG-type grinding machine is to be used for grinding of fuel system parts like pump heads, needle housings and fuel valve bodies for high and medium speed diesels engines.

• Air-driven precision grinding spindle.• Time-saving, as no lapping is required • Fine feed adjustment for grinding.• Diamond dresser mounted on machine.• Grinding wheel for all types of surface materials.• Cooling water system included.

Due to its sturdy design and incorporated features, a high quality grinding result is achieved quickly.

PUMP PERFORMANCE

The Fuel Pump Tester is designed to measure and determine wear condition of fuel pumps on 4-stroke engines and compare it with existing performance data.

The computerized test unit is operated from the included PC with an application specifically made to process the data required for testing. For each known fuel pump a “recipe” is available in the test application in which each combination of bottom/side positions is predefined.

Optimum Training in your WorkshopThe international diesel engine service team, TSA, consist of skilled marine engineers with solid experience and knowledge in diesel engine repair and maintenance.

The mobile service crew delivers first class training and service jobs in workshops, onboard ships, at power stations and in shipyards independent of location. In our own workshops, the crew perform recondition of used and damaged engine parts for both 2- and 4-stroke engines.

Choose TSA because we are:

•Fast

•Reliable

•Performqualitywork

Training courses can be conducted at the Chris-Marine service centres around the world or at the customer’s own premises.

Authentic engine parts are used so that the most efficient working methods can be established. When you buy Chris-Marine/IOP Marine equipment our service crew can come to your facility and train your workshop crew while doing a job for one of your customers, and thereby provide your engineers with live training.

Training at MAN PrimeServ Hong Kong © MAN PrimeServ

TRAINING

SWEDENChris-Marine ABStenyxegatan 3PO Box 9025SE-200 39 MalmöTel: +46 - 40 671 2600Fax: +46 - 40 671 2699info@chris-marine.com

DENMARKIOP Marine A/SEngager 7DK-2605 BrøndbyTel: +45 - 4498 3833Fax: +45- 4498 1125contact@iopmarine.dk

SINGAPOREChris-Marine (S) Pte. Ltd.46 Lokyang Way, JurongSingapore 628646Tel: +65 - 6268 8611Fax: +65 - 6264 3932chrism@chris-marine.com.sg

P.R. OF CHINAChris-Marine Trading (Shanghai) Co,. Ltd.Room 311, No.1 Building,No.288 Wu Hua Road, Shanghai 200086Tel: +86 - 21 6575 9331Fax: +86 - 21 6575 9552info.cn@chris-marine.com

INDIAChris-Marine Rep Office IndiaHouse no.70, Cosmos TownTrimurty Nagar, Ring RoadNagpur-440022State: Maharashtra; IndiaTel/Fax No. +91 712 2242719info.in@chris-marine.com

ECUADORAmazonas 14-192 y pasaje 2,San Rafael, Quito Ecuador, South America. Tel.no: +593 979 000 379 info.ec@chris-marine.com

JAPANIOP & Chris-Marine Japan OfficeKobe Kokusai Kaikan 22 Fl.,8-1-6 Goko-doriChuo-ku, Kobe, 651-0087Tel: +81 - 78 570 5642Fax: +81 - 78 570 5601info.jp@chris-marine.com

H03

4-14

27/E

SOLUTIONS FOR THE FUTUREFor five decades we have designed, manufactured and sold maintenance machines for diesel engines. Today these machines are world-renowned for being operator friendly and of high quality. Now and since the 1960's, quality, reliability and usability remain to be our key trademarks.

We are constantly growing and are represented with offices worldwide and well-equipped workshops in Singapore, Shanghai, Bahamas and Denmark.A close cooperation with local agents also helps us to serve our customers independent of their location.

WELL EDUCATED AND DEDICATED STAFF120 well educated men and women worldwide are working toimprove our products and services. They are constantly increasingthe quality, and are the hallmarks of Chris-Marine® and IOP Marine.

THE OPTIMUM SOLUTION FOR WORKSHOPS