1
6-1/8" 10-7/8" 6-3/4" 2 1/4" 12 1/2 " 5-1/4" 5-1/2" 8-3/4" NOTE: Max counter thickness is 3". Hot Side Water Supply Inlet Tube Flexible Outlet Tube Flexible Vent Tube 1/4" Incoming Water Supply The Next Necessity Submittal Sheet Job Specifications Specifications Sample Specification WDT513-16C-83-10 Hot Only – Dispenses near-boiling 200°F water • Graceful high-arching spout swivels for greater convenience and stylish integrated lever provides a dramatic look • Hot lever automatically shuts off • Durable all brass faucet construction 5-Year In-Home Limited Warranty* • For use with InSinkErator Hot Water Tank and F-1000S Filtration System Available in these designer finishes: white, biscuit, French gold, satin nickel, polished nickel, chrome, brushed chrome, mocha bronze, oil rubbed bronze, matte black, gloss black, classic oil-rubbed bronze and brushed bronze • Unit not for commercial/industrial use Instant hot water dispenser(s) shall be InSinkErator Model F-GN1100 with 2/3-gallon hot water tank, adjustable temperature from 160°F to 210°F and instant, self-closing hot valve. Warranty: 5-year parts and in-home service. * The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit. Valve Shipping Weight Instant, self-closing Required Hole Diameter Approximately 1 -1/4" – 1 -1/2" standard sink hole 4.0 lbs. Minimum 3-1/4" required from sink hole center to backsplash Printed in USA Our finest line of instant hot water dispensers for use with our Hot Water Tank for filtered near-boiling 200°F water Tank with filter sold separately (HWT-F1000S) Instant Hot Water Dispensers F-GN1100 Dimensions 1-800-558-5700 USA www.insinkerator.com The Emerson logo is a trademark and a service mark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. ©2016 InSinkErator, InSinkErator ® is a business unit of Emerson Electric Co. All Rights Reserved. 1-800-558-5700 Canada www.insinkerator.ca We Come To You ® Complies with California Lead Plumbing Law Certified to NSF/ANSI 372 0.25% lead

The Next Necessity - InSinkErator · The Emerson logo is a trademark and a service mark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: The Next Necessity - InSinkErator · The Emerson logo is a trademark and a service mark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications

6-1/8"

10-7/8"

6-3/4"

2 1/4"

12 1/2"

5-1/4"

5-1/2"8-3/4"

NOTE: Max counter thickness is 3".

Hot SideWater Supply

Inlet TubeFlexibleOutlet TubeFlexible Vent Tube1/4" IncomingWater Supply

The Next Necessity™

Submittal Sheet

Job Specifications

Specifications

Sample Specification

WDT513-16C-83-10

• Hot Only – Dispenses near-boiling 200°F water

• Graceful high-arching spout swivels for greater convenience and stylish integrated lever provides a dramatic look

• Hot lever automatically shuts off

• Durable all brass faucet construction

• 5-Year In-Home Limited Warranty*

• For use with InSinkErator Hot Water Tank and F-1000S Filtration System

• Available in these designer finishes: white, biscuit, French gold, satin nickel, polished nickel, chrome, brushed chrome, mocha bronze, oil rubbed bronze, matte black, gloss black, classic oil-rubbed bronze and brushed bronze

• Unit not for commercial/industrial use

Instant hot water dispenser(s) shall be InSinkErator Model F-GN1100 with 2/3-gallon hot water tank, adjustable temperature from 160°F to 210°F and instant, self-closing hot valve.

Warranty:5-year parts and in-home service.

* The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit.

Valve

Shipping Weight

Instant, self-closing

RequiredHole Diameter

Approximately

1 -1/4" – 1 -1/2"standard sink hole

4.0 lbs.

Minimum 3-1/4" requiredfrom sink hole centerto backsplash

Printed in USA

Our finest line of instant hot water dispensers for use with our Hot Water Tank for filtered near-boiling 200°F waterTank with filter sold separately (HWT-F1000S)

Instant Hot Water Dispensers

F-GN1100

Dimensions

1-800-558-5700USA

www.insinkerator.com The Emerson logo is a trademark and a service mark of Emerson Electric Co.

InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the

right to change or discontinue models.

©2016 InSinkErator, InSinkErator® is a business unit of Emerson Electric Co. All Rights Reserved.

1-800-558-5700Canada

www.insinkerator.ca

We Come To You®

Complies with California Lead Plumbing Law

Certified toNSF/ANSI 372≤ 0.25% lead