The New Paradigm

When electronically charged the transformer that is integrated into the device applies a high voltage to the electrode plates thereby generating plasma.

The plasmaNorm module containing the Plasma Reactor when electronically charged, removes odours caused by cooking in a domestic kitchen.

The PLASMA UNIT

The Breakthrough for Residential Applications ORIGINATING from the Space and Military Industry, the plasmaNorm technology was further developed for the elimination of odours in restaurant and food processing industries. In many European cities it is necessary to install plasma units in restaurants and food establishments that will handle up to 60,000 cubic metres per hour so the residents are not subjected to unhealthy odours and pollutants.

Plasma Reactor Directly situated above the fan are the electrode plates. The transformer integrated into the device applies a high voltage to the electrode plates thereby generating plasma. The plasma occurs as a result of the extended supply of energy to the gaseous air. When contaminated air passes through an electromagnetic field created by plasmaNorm, the micro or non-thermal reaction causes oxidation of odour molecules changing them into oxygen and carbon dioxide.

Now in kitchens that cannot be vented to the outside atmosphere in apartment buildings or when the kitchen is in the centre of the house, a rangehood with a plasma unit in it will clear the air of all the by-products of cooking so all of those offensive odours are removed from the atmosphere.

plasmaNorm plasma air purification technology Rangecraft uses the revolutionary plasmaNorm plasma air purification technology to effectively and permanently remove the by-products of cooking. Originating from the need for clean air in space travel, the plasmaNorm technology was developed for the effective elimination of odours. How does it work?There are three basic forms of matter:• gas• liquid• solidThe fourth form of matter – Plasma• can only be achieved by adding energy• a plasma state of matter also generates free

electrons and ionized atoms.

Plasma is the state of matter similar to gasin which a certain portion of particles areionized. The plasmaNorm system inducesthe state in plasma cells by introducingan electromagnetic field to gas. Gas particles inside the system then become highly charged and react with the organic molecules created from cooking to convert them into oxygen and carbon dioxide.

plasmaNorm Process

Grease Filter Carbon FilterPlasma Chemical Reaction

O2

H2O

Barrier discharge spilt molecules

H2O H2O

O2

Vapour

plasmaNorm Function Scheme

CxHy CO2Odour molecules, spores, bacteria, viruses, germs, etc.

plasmaNorm system three stages of extraction

1. Filtration – through the standard stainless steel grease filter.

2. Plasma – odour molecules undergo a cold combustion process by reacting with plasma. These molecules are oxidized and then decomposed into oxygen, carbon dioxide and water molecules.

3. Activated Carbon – resultant molecules then pass through activated carbon filtration. The plasma effect triggers a charcoal regenerating reaction resulting in a prolonged lifecycle of the filter for up to 5 years.

Ground breaking technologyplasmaNorm is the only specialist provider of air solutions that guarantees to remove odours permanently. The revolutionary plasmaNorm filter contains atmospheric, normal-pressure plasma. It clears the air of cooking odours, solvents and fine particles, with built-in air sterilization. As a filter of intake, ambient or exhaust air, plasmaNorm has undergone long-term, real-life operational testing in the catering and food industries.

How plasmaNorm worksParticles and dust are pre-filtered; the pollutant gases subsequently oxidise through ‘cold combustion’ in atmospheric, normal-pressure plasma. Odour molecules are decomposed at the molecular level. Non-combusted compounds become caught in an activated carbon storage system. The activated carbon, located downstream, acts as a storage reactor that continually regenerates itself by means of plasma flow and, for example, converts ozone back into atmospheric oxygen.

The benefits to everyone Now for people living in apartments that cannot exhaust the kitchen odours effectively or have a recirculating rangehood that does not clear the air and are left with unpleasant odours, the plasma unit offers a positive solution. Residences that are classified by the national trust, state or local council regulations can put a effective rangehood that will allow them to enjoy all the different cuisines offered today. Large apartments with difficult body corporate’s now can avoid the arguments and delays that most experience.

Photo courtesy of Complete Kitchens

Rangecraft specificationsAdvice on usage and installation.

Fan is an AC centrifugal type forward curved, dual inlet with housing.

High speed 750 cubic metres per hour (210 litres per second).

Low speed 150 cubic metres per hour (40 litres per second).

Motor - 194 Watt.

Outlet - 150mm diameter.

Duct Size - 150mm diameter minimum.

Duct type must be rigid.

Do not use flexible ducting as this can reduce airflow by up to 50%.

Ducting used must be non-flammable.

Plasma unit can be attached to the outlet of the motor in the rangehood or can be located away from the hood up to 6 metres. The connection from the hood to the plasma unit must be rigid ducting of 150mm diameter.

Air outlet from plasma unit must be at least 400 square centimetres through the top of the cupboards or the front of the cupboards. Return air must come back into the room with the hood in it. This is necessary to ensure all the residual odours are removed.

The Rangecraft rangehoods are made to be incorporated in kitchens where ducting cannot be installed to the outside atmosphere.

They will do the job over all standard electric, gas and induction hotplates from 60cm to 120cm wide.

Important note is that they do not have the capacity to do the job over indoor barbecues, high speed gas burners or hotplates with a heat output rating over 40 mega joule.

Always check with a representative from Condari P/L if there is any doubt about the hood doing a satisfactory job.

When finished cooking the rangehood can be turned to a low speed and any residual odours from the food preparation will be cleared in about 30 minutes.

RDR-900

RDL-300 RDL-600 RDL-900

150mm dia.

Maximum6 metres

CeilingCeiling

150mm diameter

Maximum6 metres

RDR-450

Rangecraftducting pieces

available

The models available are listed below and the drawings are on the following pages in this leaflet.

All these rangehoods are made of stainless steel.

RPSO 60 - 1T Slide out 60cm rangehoodRPSO 90 - 1T Slide out 90cm rangehood

RPCP 60 - 1T Compact style 60cm rangehoodRPCP 90 - 1T Compact style 90cm rangehood

RPUC 60 - 1T Under cupboard 60cm rangehoodRPUC 90 - 1T Under cupboard 90cm rangehood

RPWP 60 - 1T 60cm rangehood over inductionRPWP 100 - 1T 100cm rangehood over induction

RPEP 60 - 1T 60cm rangehood over inductionRPEP 100 - 1T 100cm rangehood over induction

In many existing kitchens there is a need to get rid of offensive odours and it may be necessary to design a special rangehood to suit the existing kitchen cupboards. This is a special service provided by Condari P/L and also for the installation.

RPSO 60 - 1 Concealed slide out hood

MODEL BODY WIDTH FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE

RPSO 60-1 600mm 515mm 1 - 1 514mm x 177mm

Plasma unit may be mounted up to 6 metres from rangehood. Electrical connection is by a 10 Amp power lead with a 3 pin plug.

Model Body Width Fanbox Width No Lights Light Centres No Filters Filter Size RPSO 60-1 600mm 515mm 1 - 1 514mm x 177mm

Electrical Connection is to be at the Junction Box Inside the Rangehood

RPSORPSO Specification Sheet

Concealed Slide Out Hood

02.05.2014

RANGECRAFTRANGEHOODS

RPSO 60-1

Plasma unit may be mountedup to 6 metres from rangehood.

276

600

515

395

120

Power Entry

38

17020

897

221

MODEL BODY WIDTH FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE

RPSO 90-1 900mm 515mm 2 320mm 2 407mm x 177mm

Plasma unit may be mounted up to 6 metres from rangehood. Electrical connection is by a 10 Amp power lead with a 3 pin plug.

RPSO 90 - 1 Concealed slide out hoodRANGECRAFT

RANGEHOODS RPSORPSO Specification Sheet

Concealed Slide Out Hood

RPSO 90-1

Plasma unit may be mountedup to 6 metres from rangehood.

Electrical Connection is to be at the Junction Box Inside the Rangehood

02.05.2014

17020

38

276

120

900

515

395

Model Body Width Fanbox Width No Lights Light Centres No Filters Filter SizeRPSO 90-1 900mm 515mm 2 320mm 2 407mm x 177mm

PowerEntry

897

221

RPCP 60 - 1 Stainless steel fascia with concealed motorbox

MODEL BODY WIDTH FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE

RPCP 60-1 600mm 435mm 1 - 2 272mm x 355mm

Plasma unit may be mounted up to 6 metres from rangehood. Electrical connection is to be at the Junction Box inside the rangehood.

Model Body Width Fanbox Width No Lights Light Centres No Filters Filter size RPCP 60-1 600mm 435mm 1 - 2 272mm x 355mm

Electrical Connection is to be at the Junction Box Inside the Rangehood

RPCPRPCP Specification Sheet

Stainless Steel FasciaWith Concealed Motorbox

02.05.2014

RANGECRAFTRANGEHOODS

RPCP 60-1

510

280

Power Entry

Plasma unit may be mountedup to 6 metres from rangehood.

600 100

415

435

946

221

MODEL BODY WIDTH FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE

RPCP 90-1 900mm 435mm 2 525mm 2 422mm x 355mm

Plasma unit may be mounted up to 6 metres from rangehood. Electrical connection is to be at the Junction Box inside the rangehood.

RPCP 90 - 1 Stainless steel fascia with concealed motorboxRANGECRAFT

RANGEHOODS RPCPRPCP Specification Sheet

Stainless Steel FasciaWith Concealed Motorbox

RPCP 90-1

Plasma unit may be mountedup to 6 metres from rangehood.

Electrical Connection is to be at the Junction Box Inside the Rangehood

02.05.2014

Model Body Width Fanbox Width No Lights Light Centres No Filters Filter SizeRPCP 90-1 900mm 435mm 2 525mm 2 422mm x 355mm

900

435

100

415

280

510

Power Entry

946

221

RPUC 60 - 1 Concealed cupboard hood

MODEL BODY WIDTH FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE

RPUC 60-1 600mm 580mm 1 - 2 269mm x 250mm

Plasma unit may be mounted up to 6 metres from rangehood. Electrical connection is by a 10 Amp power lead with a 3 pin plug.

Model Body Width Fanbox Width No Lights Light Centres No Filters Filter Size RPUC 60-1 600mm 580mm 1 - 2 269mm x 250mm

Electrical Connection is to be at the Junction Box Inside the Rangehood.

RPUCRPUC Specification Sheet

RPUC 60-1

Concealed Cupboard Hood

02.05.2014

Power Entry

Plasma unit may be mountedup to 6 metres from rangehood.

RANGECRAFTRANGEHOODS

600

12

360

580

280

240

12

892

221

MODEL BODY WIDTH FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE

RPUC 90-1 900mm 880mm 2 770mm 2 340mm x 260mm

Plasma unit may be mounted up to 6 metres from rangehood. Electrical connection is by a 10 Amp power lead with a 3 pin plug.

RPUC 90 - 1 Concealed cupboard hood

RPUC Specification SheetRANGECRAFTRANGEHOODS RPUC Concealed Cupboard Hood

Model Body Width Fanbox Width No Lights Light Centres No Filters Filter SizeRPUC 90-1 900mm 880mm 2 770mm 2 340mm X 260mm

RPUC 90-1

Power Entry

Plasma unit may be mountedup to 6 metres from rangehood.

Electrical Connection is to be at the Junction Box Inside the Rangehood.

02.05.2014

900

880

360

12

280240

892

221

12

RPWP 60 - 1 Over induction

MODEL BODY WIDTH FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE

RPWP 60-1 600mm 565mm 2 300mm 2 272mm x 272mm

Plasma unit may be mounted up to 6 metres from rangehood. Must be installed 750mm above induction hotplate. Electrical connection is by a 10 Amp power lead with a 3 pin plug.

Model Body Width Fanbox Width No Lights Light Centres No Filters Filter Size RPWP 60-1 600mm 565mm 2 300mm 2 272mm x 272mm

Electrical Connection is to be at the Junction Box Inside the Rangehood.

RPWPRPWP Specification Sheet

RPWP 60-1

Over induction

02.05.2014

Power Entry

Plasma unit may be mountedup to 6 metres from rangehood.

RANGECRAFTRANGEHOODS

221

982

12

290

330

600

565

450

12

MODEL BODY WIDTH FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE

RPWP 100-1 1000mm 980mm 2 480mm 2 479mm x 260mm

Plasma unit may be mounted up to 6 metres from rangehood. Must be installed 750mm above induction hotplate. Electrical connection is by a 10 Amp power lead with a 3 pin plug.

RPWP 100 - 1 Over inductionRPWP Specification SheetRANGECRAFT

RANGEHOODS RPWP Over induction

Model Body Width Fanbox Width No Lights Light Centres No Filters Filter SizeRPWP 100-1 1000mm 880mm 2 480mm 2 479mm X 260mm

RPWP 100-1

Power Entry

Plasma unit may be mountedup to 6 metres from rangehood.

Electrical Connection is to be at the Junction Box Inside the Rangehood.

02.05.2014

982

221

12

290330

1000

980

450

12.0

RPEP 60 - 1 Over induction

MODEL BODY WIDTH FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE

RPEP 60-1 600mm 565mm 2 300mm 2 272mm x 272mm

Plasma unit may be mounted up to 6 metres from rangehood. Can be installed 600mm above induction hotplate. Electrical connection is by a 10 Amp power lead with a 3 pin plug.

Model Body Width Fanbox Width No Lights Light Centres No Filters Filter Size RPEP 60-1 600mm 565mm 2 300mm 2 272mm x 272mm

Electrical Connection is to be at the Junction Box Inside the Rangehood.

RPEPRPEP Specification Sheet

RPEP 60-1

Over induction

17.04.2014

Plasma unit may be mountedup to 6 metres from rangehood.

RANGECRAFTRANGEHOODS

12

290

330

1102

221

600

565

570

Power Entry

MODEL BODY WIDTH FANBOX WIDTH LED LIGHTS LIGHT CENTRES NO FILTERS FILTER SIZE

RPEP 100-1 1000mm 980mm 2 480mm 2 479mm x 260mm

Plasma unit may be mounted up to 6 metres from rangehood. Can be installed 600mm above induction hotplate. Electrical connection is by a 10 Amp power lead with a 3 pin plug.

RPEP 100 - 1 Over inductionRPEP Specification SheetRANGECRAFT

RANGEHOODS RPEP Over induction

Model Body Width Fanbox Width No Lights Light Centres No Filters Filter SizeRPEP 100-1 1000mm 880mm 2 480mm 2 479mm X 260mm

RPEP 100-1

Plasma unit may be mountedup to 6 metres from rangehood.

Electrical Connection is to be at the Junction Box Inside the Rangehood.

02.05.2014

330

290

12

1102

221

1000

980

570

12

Power Entry

CONDARI Rangehoods made in Ringwood 3134QASAIR Reserves the right to change specification without notice. ® is a registered trademark.

PTY LTD

DISTRIBUTED IN AUSTRALIA BY CONDARI PTY LTDTel: 1300 360 563HEAD OFFICEVIC Tel: +61 3 9482 7088 Fax: +61 3 9482 7011Email: sales@condari.com.auWebsite: www.condari.com.au

YOUR DISTRIBUTORS

NSW/ACT Phone: 02 9316 4599 Fax: 02 9316 9299 Email: salesnsw@qasair.com.auQLD Phone: 07 3423 3503 Fax: 07 3282 9122 Email: salesqld@qasair.com.auSA/NT Phone: 1300 360 563 Fax: 03 9482 7011 Email: salessa@qasair.com.auTAS Phone: 1300 360 563 Fax: 03 9482 7011 Email: sales@qasair.com.auWA Phone: 08 9242 5387 Fax: 08 9201 0887 Email: saleswa@qasair.com.au

N e w Z e a l a n d Kitchen Appliance Specialist Ltd320 Manchester StreetChristchurch, New Zealand Tel: +64 3379 0360 Fax: +64 3365 5623

Kouzina Appliances 155 The Strand Parnell, Auckland, New ZealandTel: +64 9 377 7822 Fax: +64 9 377 7824 Email: sales@kouzina.co.nz

S i n g a p o reEldric Marketing Pte Ltd176 Orchard Rd#05-03 CentrepointSingapore 238843Tel: +65 6369 1188 Fax: +65 6733 8133

5 Pereira Rd#02-01 Asiawide Industrial BuildingSingapore 368025Tel: +65 6743 8388 Fax: +65 6743 0202

Printed in Melbourne Australia 06/14

www.qasair.com.au www.condari.com.au