Upload
others
View
6
Download
1
Embed Size (px)
Citation preview
THE MECHANICAL & DURABILITY PERFORMANCE
OF CONCRETE CONTAINING WASTE CONCRETE
ASH AS CEMENT REPLACEMENT MATERIALS
AHMAD HADRI BIN HUSAIN
UNIVERSITI SAINS MALAYSIA
2015
THE MECHANICAL & DURABILITY PERFORMANCE
OF CONCRETE CONTAINING WASTE CONCRETE
ASH AS CEMENT REPLACEMENT MATERIALS
By
AHMAD HADRI BIN HUSAIN
Thesis submitted in fulfillment of the requirements for the
degree of master of sciences
September 2015
ii
ACKNOWLEDGEMENTS
Bismillahirrahmanirrahim. In the name of Allah, The Most Merciful, I would like to
express my deepest gratitude towards Allah S.W.T for the grace and help me to
finally finish my research study. I would like to acknowledge and express my
appreciation to my supervisor Dr. Noor Faisal Abas for the invaluable guidance, his
inspiration and patience in making this research complete. I am very thankful for his
help from the beginning of my study until to my last words of dissertation. Also, I
am giving specials acknowledgement goes towards the funding of my Msc study, the
Ministry Of High Education Of Malaysia and also to financial support for this
research granted by Universiti Sains Malaysia (203/PPBGN/6711258)
Besides that, my sincere thanks go to all members of the staff of School of
Housing, Building and Planning (HBP), USM with help and sharing me their
knowledge to me during this study. This thankful also goes to the technical staff for
the co-operation and personal assistance in making this research possible. A special
gratitude to all my friends that help me during my study at USM. Others than that,
this thankful also is given to another staff from School of Biology, USM for their
involvement in providing test facilities.
My sincere indebtedness and gratitude to my loving parents Mr Husain bin
Mohamed and Mrs. Angidah binti Daud, my brothers and sisters, and my family for
their encouragement and infinite love. Thank you for all the sorrow and happiness
that we have shared.
iii
TABLE OF CONTENTS
Page
ACKNOWLEDGEMENTS ii
TABLE OF CONTENT iii
LIST OF TABLES vii
LIST OF FIGURES viii
LIST OF ABBREVIATIONS xi
LIST OF PUBLICATION xiii
ABSTRAK xiv
ABSTRACT xv
CHAPTER 1 INTRODUCTION
1.1 Background Of The Study 1
1.2 Problem Statements 5
1.3 Aim And Objective 7
1.4 Scope And Limitation Of Study 7
1.5 Significant Of Research Study 8
CHAPTER 2 LITERETURE REVIEW
2.1 Introduction 9
2.2 Definitions Of Waste Concrete 10
2.3 Type Cement Replacement 15
2.3.1 Fly Ash 16
2.3.2 Metakaolin 17
2.3.3 Ground Granulated Blast-
Furnace Slag (GGBF)
18
iv
2.3.4 Limestone 19
2.3.5 Rice Husk 21
2.3.6 Condensed Silica Fume 22
2.4 Impact Of Recycled Concrete Into New
Concrete
23
2.4.1 Compressive Strength 23
2.4.2 Porosity 26
2.4.3 Water Absorption 28
2.4.4 Permeability 29
2.4.5 Depth Of Carbonation 30
2.5 Effect Of Cement Replacement 31
2.5.1 Workability 32
2.5.2 Strength 32
2.5.3 Durability 36
2.6 Concrete Admixtures 38
2.6.1 Dispersing Admixture 40
2.6.2 Accelerating Admixture 42
2.6.3 Retarding Admixtures 43
2.6.4 Air-Entraining Admixture 43
2.7 Chapter Summary 44
CHAPTER 3 RESEARCH METHODOLOGY
3.1 Introduction 45
3.2 Characteristic Of Materials Used 46
3.2.1 Cement 46
3.2.2 Waste Concrete Ash 49
3.2.3 Fine Aggregate 53
3.2.4 Coarse Aggregate 55
3.2.5 Water 56
3.3.6 Superplasticizer 56
3.3.7 Admixture 57
v
3.3.7.1 Silica Fume 57
3.3.7.2 Sodium Silicate With Sodium Hydroxide 58
3.3.7.3 Styrene Butadiene (SBR) 59
3.3 Experimental Program 60
3.4 Developing And Formulation Mix Design 63
3.5 Preparation Of Specimens 69
3.6 Curing Condition 71
3. 7 Engineering Performance 72
3.7.1 Slump Test 72
3.7.2 Concrete Density 73
3.7.3 Compressive Strength 75
3.7.4 Flexural Strength 76
3.7.5 Ultrasonic Pulse Velocity (UPV) 78
3.8 Durability Performance 80
3.8.1 Permeability 80
3.8.2 Water Absorption 83
3.8.3 Porosity 85
3.8.4 Depth Of Carbonation 87
3.8.5 Microstructure Images 88
CHAPTER 4 TRIAL MIXES PERFORMANCE OF CONCRETE
CONTAINING WASTE CONCRETE ASH
4.1 Introduction 89
4.2 Concrete Density 91
4.3 Compressive Strength 93
4.4 Conclusion 97
CHAPTER 5 MECHANICAL PERFORMANCE & DURABILITY OF
CONCRETE CONTAINING WASTE CONCRETE ASH AS CEMENT
REPALCEMENT MATERIALS
5.1 Introduction 99
5.2 Mechanical Performance 99
vi
5.2.1 Slumps Test 99
5.2.2 Concrete Density 102
5.2.3 Ultrasonic Pulse Velocity (UPV) 107
5.2.4 Compressive Strength 112
5.2.5 Flexural Strength 117
5.3 Durability Performance 121
5.3.1 Permeability 121
5.3.2 Water Absorption 125
5.3.3 Porosity 130
5.3.4 Depth Of Carbonation 134
5.3.5 Microstructure Images 138
CHAPTER 6 CONCLUSIONS AND RECOMMENDATIONS FOR
FURTHER RESEARCH
6.1 Main Conclusions 150
6.2 Effect Of Difference Type Waste Concrete And Concrete
Admixture Used To Produce A New Concrete
151
6.3 Effect Of Differences Waste Concrete Ash For Normal Grade
Concrete
153
6.4 Effect Of Differences Waste Concrete Ash For High Strength
Concrete
157
6.5 Recommendations For Further Research 160
6.6 Implication and Application 161
REFERENCES 162
APPENDIX A 171
APPENDIX B 173
APPENDIX C 174
vii
LIST OF TABLES
Page
Table 3.1 Composition Of Cement (Provide By Cement Industries
Of Malaysia Berhad (CIMA)
46
Table 3.2 Type And Characteristic Of Cement Compound (Provide
By Cement Industries Of Malaysia Berhad (CIMA))
48
Table 3.3 Sieve Analysis 53
Table 3.4 Grading Limits Of Fine Aggregate 55
Table 3.5 Specification Sodium Silicate Liquid 58
Table 3.6 Schedule Of Test Programe 62
Table 3.7 Approximate Compressive Strength (N/Mm2) Of
Concrete Mixes Made With Water/Cement Ration 0.5
66
Table 3.8 Mix Proportions Of All Trial Mixes 68
Table 3.9 Mix Proportions Of All Mixes 70
Table 3.10 Suggested Pulse Velocity Rating For Conrete 79
Table 4.1 Slump Test Result For All Specimens 90
Table 4.2 Compressive Strength Of Trial Mix Specimens 94
Table 5.1 Concrete Density Of All Specimens 102
Table 5.2 Ultrasonic Pulse Velocity Of All Specimens 108
Table 5.3 Compressive Strength Of All Specimens 112
Table 5.4 Flexural Strength Of All Specimens. 117
Table 5.5 Intrinsic Permeability Of All Specimens 121
Table 5.6 Average Result Of Water Absorption Test For All
Specimens
126
Table 5.7 Porosity Of All Specimens 131
Table 5.8 Depth Of Carbonation Of All Specimens 135
viii
LIST OF FIGURES
Page
Figure 2.1 The Solution To Disposal Waste Conrete 11
Figure 2.2 Chronological Development of Concrete 38
Figure 3.1 The Process Of Waste Concrete Ash 51
Figure 3.2 Concrete Crushing Machine 51
Figure 3.3 Ball Mill Machine 52
Figure 3.4 Sieving Process 52
Figure 3.5 Particle Size Distribution Of Fine Aggregate (Maximum And
Minimum Value Obtained From Grading Limits Of Doe Mix
Design Procedure, Zone 2)
54
Figure 3.6 Densified Silica Fume 57
Figure 3.7 Flow Chart Of Experimental Program 61
Figure 3.8 Curing Process 71
Figure 3.9 Slump Equipment 73
Figure 3.10 Electronic Balance For Density Test 74
Figure 3.11 Gotech Compression Testing Machine 75
Figure 3.12 Flexural Strength Testing Machine 77
Figure 3.13 PUNDIT Instrument 79
Figure 3.14 Arrangement Of Transducers During UPV Testing 79
Figure 3.15 Illustration For Extraction Of Permeability Sample From A
Prism
82
Figure 3.16 Cylinder Samples During Water Absorption 84
Figure 3.17 Apparatus For Porosity Test By Vacuum Saturation Method 86
Figure 3.18 Sample Of Carbonation Test 88
Figure 4.1 Average Bulk Density For All Specimens 91
Figure 4.2 Result Of Compressive Strength For Trial Mix Design 94
ix
Figure 5.1 Slumps Test 100
Figure 5.2 Concrete Density Of WCA As Cement Replacement Concrete
Grade 25 Versus Age
103
Figure 5.3 Concrete Density Of WCA As Cement Replacement Concrete
Grade 50 Versus Age
104
Figure 5.4 Ultrasonic Pulse Velocity Of Concrete Grade 25 Versus
Period
109
Figure 5.5 Ultrasonic Pulse Velocity Of Concrete Grade 50 Versus
Period
110
Figure 5.6 Compressive Strength Of Specimen Concrete Grade 25
Versus Time (Days)
113
Figure 5.7 Compressive Strength Of Specimen Concrete Grade 50
Versus Time (Days)
114
Figure 5.8 Flexural Strength Of Specimens Grade 25 118
Figure 5.9 Flexural Strength Of Specimens Grade 50 119
Figure 5.10 Intrinsic Permeability Of Specimens Grade 25 Versus Days 122
Figure 5.11 Intrinsic Permeability Of Specimens Grade 50 Versus Days 123
Figure 5.12
The Percentage Of Water Absorption For Specimens To The
Ages For Specimen’s Grade 25
126
Figure 5.13 The Percentage Of Water Absorption For Specimens To The
Ages For Specimen’s Grade 50
128
Figure 5.14 The Percentages Of Porosity For Specimens Grade 25 Versus
The Age
131
Figure 5.15 The Percentages Of Porosity For Specimens Grade 50 Versus
The Age
132
x
Figure 5.16 Depth Of Carbonation Of Specimen’s Grade 25 Versus Age 135
Figure 5.17 Depth Of Carbonation Of Specimen’s Grade 50 Versus Age 136
Figure 5.18 SEM Image Of Sample 25R0 At 500x Magnification 139
Figure 5.19 SEM Image Of Sample 25R0 At 1000x Magnification 139
Figure 5.20 SEM Image Of Sample 25R10 At 500x Magnification 140
Figure 5.21 SEM Image Of Sample 25R10 At 1000x Magnification 141
Figure 5.22 SEM Image Of Sample 25R40 At 500x Magnification 142
Figure 5.23 SEM Image Of Sample 25R40 At 1000x Magnification 143
Figure 5.24 SEM Image Of Sample 50R10 At 500x Magnification 145
Figure 5.25 SEM Image Of Sample 50R10 At 1000x Magnification 145
Figure 5.26 SEM Image Of Sample 50R40 At 500x Magnification 147
Figure 5.27 SEM Image Of Sample 50R40 At 1000x Magnification 147
xi
LIST OF ABBREVIATIONS
WCA Waste Concrete Ash
OPC Ordinary Portland Cement
HSC High Strength Concrete
NSC Normal Strength Concrete
NaOH Sodium Hydroxide
SP Superplasticizer
SEM Scanning Electron Microscopy
UPV Ultrasonic Pulse Velocity
LOI Loss On Ignition
RHA Rise Husk Ash
HRM High Reactivity Metakolin
BS British Standards
MS Malaysian Standard
xii
LIST OF PUBLICATION
Ahmad Hadri Husain, Noor Faisal Abas, (2015). The Implantation Of Waste
Concrete Ash As Partial Cement Replacement Materials In Concrete.
Australian Journal Of Basic And Applied Sciences. AJBAS-0007
Ahmad Hadri Husain, (2014). The Mechanical Performance Of Waste Concrete Ash
As Cement Replacement Materials In Concrete. In Proceeding Of The
International Conference On Science, Engineering And Built Environment
(ICSEBS 2014)
xiii
PRESTASI MEKANIKAL & KETAHANAN KONKRIT
MENGANDUNGI DEBUAN SISA KONKRIT SEBAGAI BAHAN
PENGGANTI SIMEN
ABSTRAK
Penggunaan konkrit adalah penting dalam industri pembinaan dan ia menjadi
bahan binaan yang paling penting dan utama digunakan di seluruh dunia. Kajian ini
membentangkan kajian eksperimen mengenai pengaruh perbezaan peratusan debuan
sisa konkrit sebagai bahan pengganti simen untuk membentuk konkrit baru.
Keputusan eksperimen akan dinilai berdasarkan prestasi mekanikal dan ketahanan
konkrit. Untuk meningkatkan kualiti konkrit penggantian simen, bahan tambah
konkrit ditambah ke dalam konkrit sisa debuan. Kadar penggunaan campuran sisa
debuan konkrit adalah antara 5% hingga 40% dan peratusan optimum bahan “Silica
Fume” sebagai bahan tambahan konkrit. Semua spesimen melalui proses
pengawetan air dan diuji pada umur 7, 14, 28, 90 dan 180 hari. Berdasarkan kajian
ini, ia mendedahkan bahawa peningkatan peratusan sisa konkrit abu akan
mengurangkan kualiti konkrit. Berdasarkan penemuan yang diperolehi, peratusan
optimum sisa debuan konkrit yang digunakan adalah 10%. Walaubagaimana pun,
kekuatan mampatan diperolehi adalah rendah apabila penambahan peratusan WCA
ke dalam konkrit. Kehadiran bahan tambah konkrit akan membantu mengembalikan
kekuatan dan ketahanan konkrit
xiv
THE MECHANICAL & DURABILITY PERFORMANCE OF
CONCRETE CONTAINING WASTE CONCRETE ASH AS
CEMENT REPLACEMENT MATERIALS
ABSTRACT
The use of concrete is important in the construction industry and it became
the most important and major construction materials use all over the world. This
research presents an experimental study of the influences of different percentage
waste concrete ash used as cement replacement materials to form a new concrete.
The results of the experiment were evaluated based on mechanical and durability
performance of concrete. To improve the quality of cement replacement concrete,
concrete admixture was added to work with waste concrete ash. The mix
proportioning of waste concrete ash uses were between 5% to 40% and Silica Fume
was used as an admixture. All specimens were cured by water curing process and it
was tested at the age of 7, 14, 28, 90 and 180 days. Based on this study, it revealed
that increasing a percentage of waste concrete ash reduces the quality of concrete. It
was found that, the optimum percentage of waste concrete ash used in cement
replacement is 10%. However, the compressive strength will be reduced when more
percentage of WCA were added. The presence of concrete admixture helps to restore
the strength and durability of concrete
1
CHAPTER 1
INTRODUCTION
1.1 Background of the study
The increasing rate of development and construction industry does not only
boost demand on concrete but it also makes concrete one of the major contributors to
construction waste. Every development project which involves construction and
demolition inevitably increases the construction waste which needs a place to be
disposed of. RILEM Committee (2004) reported that waste concrete at the United
Kingdom is estimated at 30 million tonnes/year, which is of 500kg/person/year.
Meanwhile, the construction waste in Malaysia at years 2013 is 22 million tons. The
construction waste has obviously become a major cause for concern among
communities of developed countries. In developing countries like Malaysia, waste
products from construction industry are not being taken seriously because almost all
construction activities in Malaysia are based on build concept. However, concerns
about construction waste among Malaysians have grown in recent years. Thus, the
Malaysian government has started to promote a new concept of construction i.e.,
green building campaign to reduce construction waste nationwide.
Concrete is the most important and major construction material which is used
universally. It is widely used in almost every type of construction among others,
building, infrastructure and structures which are used to protect from rough
environment and other developments. It became an important material in
construction industry based on its strength of being able to support higher load and
2
its durability against the environment compared to the other material. On the other
hand, the usage of concrete for developmental purposes is double the usage of other
material such as wood, glass and steel. Concrete is a manufactured product which
consists of raw material such as cement, sand, aggregate and some admixture to
improve the characteristic of concrete. High demand for concrete increases the use of
raw materials in the mixture of concrete.
Cement is one of the raw materials that is used in concrete mix and acts as a
binder between sand and aggregate. However, it has been criticized by some
researchers on green environment grounds. This criticism was levelled based on the
production of Portland cement which caused greenhouse emission: a phenomenon
which contributes to global warming. According to some researchers, the production
of a tonne of Portland cement generates about one tonne of carbon dioxide (CO2) to
the atmosphere and it is of 5% of global CO2 emission. (Nuruddin etc al, 2010).
Annually, global production of Portland cement accounts for 1.35 billion tonnes of
greenhouse emission. (Malhotra, 2002; Hardjito, 2004).
Various studies have been carried out to minimize the dependence on cement
by replacing or adding an admixture into concrete which is called as pozolanic
material and geopolymer. There are a few materials which are used to reduce the
dependency on cement such as silica fume, fly ash, rice-husk, slag, clay, etc. By
using these alternative materials to replace cement, it will affect the durability and
strength of concrete. Besides, another factor in choosing the material to replace
cement is availability, the application to the end user and cost. These materials also
have a binder characteristic compared to concrete but in low CO2 emissions and they
are environmental-friendly.
3
The reduction of cement in the concrete-mix will help to reduce the
dependency on cement, which contributes to the global warming. However, the
waste concrete is another problem that is being faced by the environment because
waste concrete requires a suitable landfill for it to be disposed of. To date, the only
available solutions to minimize the construction waste are by recycling and reusing.
Conventionally, waste concrete from demolished buildings will be disposed of at
designated landfill areas, however, it is not a good solution to dump the waste
concrete though because it increases the number of landfill areas. In most developed
countries, the waste concrete are being reused and recycled as an aggregate
replacement to other construction projects such as highways and other structures.
Many studies have been reported in the literature on recycled concrete aggregate
being used in producing another new concrete. For instance, Myle Nguyen James,
Wonchang Choi, et al (2011) studied about the “Use Recycled Concrete Aggregate
(RCA)” and Fly Ash (FA) revealed that recycled RCA of up to 25% and FA of up to
15% do not create a significant effect on concrete and its strength is almost the same
as concrete with natural aggregate. The report from The Cement Sustainability
Initiative revealed that by using 40%-50% of waste concrete and other pozolanic
material to replace cement can reach 20-40MPa strength of concrete. Concisely, the
waste concrete can be recycled into another new concrete which helps minimizing
the landfill areas. It provides an economical and environmental benefit by reducing
the cost for new cement while reducing a CO2 emission at the same time.
4
The waste concrete can be used in production of new concrete but the quality
of it is less compared to conventional materials. This is because of the quality of
waste concrete is relatively lower compared to conventional material. For example,
in reusing waste concrete to replace cement, the silica element in waste concrete is
less compared to the conventional cement. On the other hand, the characteristics of
waste concrete are: higher water absorption, high rapid chloride ion permeability,
and lower compression strength and it changes the strength and the durability of
concrete. (Report Cement Concrete and Aggregate Australia, 2008). To improve a
lack of recycled concrete, an admixture or geopolymer can be added to improve the
concrete and produce a concrete that has the same strength and durability with
normal concrete.
Generally, construction waste is one of problems that have been faced in the
construction industries. The problem has always been of designating a suitable place
to dispose of construction waste. The best solutions to handle the waste materials are
by recycling and reusing them to produce another product. In the present study, the
waste concrete is being recycled to be used as cement replacement materials. The
waste concrete can help reduce the consumption of cement and contribute to
reducing CO2 emissions that disrupt the environment as well as reducing landfill
waste.
5
1.2 Problem Statement
Acceleration of municipal, especially in both developing and developed
countries produces a lot of construction waste and increases the demand for raw
materials such as cement, sand and natural aggregate. The recycle and reuse
construction waste can help to reduce the demand of the raw materials in
construction industry. Almost all waste from construction and demolition of
buildings can be reused and recycled to produce a new product. However, there is a
lack of implementation in reusing and recycling the construction waste because it is
difficult to produce reused product that comes from tonnes of construction waste. In
order to maximise the reused material from construction waste, an effective plan
should be drafted to identify how and what part or materials from construction waste
and demolition project can be reused. By identifying which one of the construction
waste are useful to be recycled and reused, the construction waste can be minimised
and thus reduce the landfill areas.
Another major challenge in reusing the construction waste is the
environment. In the present study, a waste concrete from new projects or demolition
projects were used as replacement cement base to produce a new and fresh concrete.
Based on previous research and report reviewed, recycled concrete has higher water
absorption, higher rapid chloride ion permeability, and lower compression strength
compared to normal concrete without recycled concrete. (J.M. Khatib, 2004; Report
Cement Concrete and Aggregate Australia, 2008). From the aforementioned report, it
was found that by using recycled concrete in new concrete reduced the strength and
durability compared to the concrete using a conventional material (natural material).
With the surrounding environment, the concrete that is produced using waste
concrete will fail unless the quality of it is of the same with the natural concrete that
6
is made from the conventional material. The new design mix should be produced to
optimize the usage of recycled concrete without compromising the strength and
durability of concrete that is being exposed to the environment.
The production of concrete using waste concrete materials to achieve same
quality with conventional concrete is possible. Concrete admixture used in fresh
concrete can increase the durability and strength. However, not all admixtures are
suitable to be used and affected to increase durability and strength of concrete
especially concrete that containing waste concrete. Different characteristics between
waste concrete and conventional material are the major problem to identify a suitable
admixture. It requires further research to identify a suitable admixture that can
increase the durability and strength of concrete from the recycled concrete.
7
1.3 Aims and Objectives
The aim of this study was to recycle the waste concrete by replacing a cement
base on a new concrete. The fresh concrete produced were using less quantity of
cement content by replacement cement to waste concrete ash (WCA). Therefore, the
objectives of this study are to:
a) Determine the optimum percentage of waste concrete ash to replace cement
content.
b) Explore the strength of concrete with cement replacement from waste
concrete ash.
c) Identify the suitable admixture that can be used with cement replacement to
gain the strength and durability of concrete.
1.4 Scope And Limitation Of Study
The scope of the project study is to produce the design mix for concrete using
the waste concrete ash as cement replacement. In order to ensure the quality of
concrete, the concrete was tested based on its strength and durability factors. Few
concrete admixtures were used in trial mix design to determine the best admixture
and they were selected. The design was divided into two types of concrete namely
low strength concrete (normal concrete) and high strength concrete (HSC). The
purpose was to ensure that a recycled concrete was capable of being used in
construction projects in Malaysia. The percentages of waste concrete ash as cement
replacement were conducted within the range of 5% - 40% from the quantity of
cement content. These concrete were tested by mechanical and durability properties
after it been cure in water tanks.
8
1.5 Significant Of Research Study
Production of construction waste can be a major concern to environment
because it needs a place to be disposed of. In Malaysia, the construction waste is not
a major concern of its society yet but, it will be in years to come. The proper
planning and solutions should be thought about to ensure this problem is resolved
before it becomes worse for the country in the future. The purpose of this study was
to produce an alternative solution to reduce the construction waste while reducing
dependence on a raw material such as cement. Cement is the most important material
in construction industry and the demand for this material has always been increasing.
Meanwhile, the source for the production of cement comes from the lime stone and
with a rising demand for cement will contribute to a large volume of lime stone
consumption.
This study was conducted by recycling waste concrete to replace the
cement content without reducing the strength and quality of concrete. The optimum
design on quantity of waste concrete needs to be defined to ensure the recycled
concrete as replacement cement can be used in construction industry. Hence, proper
plans should be made to reduce the construction waste.
9
CHAPTER 2
LITERATURE REVIEW
2.1 Introduction
In this chapter, the topic that should first be highlighted is waste concrete
being reused and recycled to form a new-end product. Concrete is the most common
material which is used in construction industry because it has characteristics such as
better strength and durability. The production of concrete is estimated that roughly
25 billion tonnes of concrete are manufactured globally each year and twice as much
concrete is used in construction around the world compared to other materials like
steel and timber. What follows next is, the criteria of recycling a vast concrete is
further discussed to identify the characteristics of waste concrete.
The following discussion in this chapter is to determine the important factors
needed to be considered to use the cement replacement materials. In designing a
concrete mix, the change of any materials causes a change of the mix’s
characteristics. For instance, the change may affect the characteristics of concrete in
terms of mechanical performances and durability. Thus, it is important to identify the
effect of cement replacement to ensure the end product will have same quality to
conventional concrete. In this chapter, a few roles of cement replacement in other
contexts will be reviewed to ensure to produce a perfect design mix in containing
waste concrete ash as cement replacement materials. The last part of this chapter is
the summary of a thorough review of literature and it highlights the gap identified in
relation to the application of recycled vast waste concrete as cement replacement.
Also, through this gap, a conceptual framework for the study has been developed.
10
2.2 Definitions of waste concrete
Concrete is the most common material which is widely used in construction
industries. In fact, concrete is the mostly produced waste material in the industry
compared to other materials like timber, steel, plastic and aluminium. Based on a
report by The World Business Council for Sustainable Development (WBCSD)
entitled “Report The Cement Sustainability Initiative (Recycling Concrete)”, it is
about 1,300 million tonnes of waste are generated in Europe each year, of which
about 40% or 510 million tonnes are construction and demolition waste. However,
the impact of concrete is bigger in developing countries such as China and India:
they are now producing and using 50% of the world concrete, their waste generation
is also significant for development. The increase of waste concrete becomes a global
issue and because of that, many countries have recycling schemes for Construction
and Demolition Waste (C&DW) concrete such as the Netherlands, Japan, Belgium,
Germany and other developed countries. For developing countries like Malaysia,
waste concrete are put in landfill sites.
There are interesting facts about waste concrete, which are recycling concrete
is not a new and has always been an element in construction. Based on the report of
The Cement Sustainability Initiative (Recycling Concrete), since early Roman time,
construction material have been recycled and reused. Research on the properties of
recycled concrete began in the 1940s. However, it is hard to find any data because
the collection is not systematic and there is no specific data on waste concrete
produced by most countries. In general, most developing countries use the data about
waste that are disposed of in designated landfill areas and it is different from
developed countries which use a vast concrete to produce a reusable aggregate from
crushing concrete. As technology has crept into the ways of crushing concrete and
11
considering the fact that it is relatively inexpensive these days, it is therefore possible
for any country to recycle waste concrete. With the wealth of research findings, both
developed and developing countries can enlarge their scope in recycling waste
concrete.
Concrete is an excellent material in construction because it is durable and
energy efficient. Even though it is a perfect material, waste is always generated due
to human beings always wanting changes. Waste concrete is able to be reused in its
original form and it also can be recycled by means of a process of crushing and
sieving to turn it into smaller blocks or aggregate for use as new product. Concrete is
made from coarse aggregate, fine aggregate, cement and other added mixture if
necessary. It binds with water as an activation agent to cement. It can be recycled in
3 stages which are: a returned concrete (fresh and wet concrete) that mostly comes
in excess in concrete truck, waste produced at a pre-cast production facility and lastly
waste from construction and demolition (in the form of hardened concrete). The
options for managing waste concrete can be considered diagrammatically:
Figure 2.1: The Solution To Disposal Waste Concrete
Returned / Waste
Concrete
Land Fill Disposal
Dry RecyclingRaw Material For Cement
Plants
Wet Reclaiming Or
Recycling
Others Concrete Products
12
Based on the diagram above, most of waste concrete are being disposed of at
landfill areas because it is the easiest solution for managing waste concrete to date.
For dry recycling and raw material for cement plants, it involved another process
before it can be used to new product and it is basically a process that crushes a vast
concrete to be used as recycled aggregate. Wet reclaiming or recycling is a process
that involves a wet concrete by washing it before concrete becomes dry and
hardened. This procedure is normally used when there are excessive concrete left in
the truck and sometimes, wasted concrete are used to make pre-cast concrete blocks
that can be used on site or sold. Finally, waste concrete can be reused from another
concrete product such as a block by cutting into smaller sizes and it produces less
environmental impact compared to other processes. The limited market available is
the biggest problem in this process.
A few initiatives are taken to recycle and reuse waste concrete. Waste
concrete can be used as coarse aggregate, fine aggregate or as blocks (cut-down
form). Coarse and fine aggregate that come from waste concrete (old concrete) are
called as recycled aggregate. Consumption of concrete in construction industries is
larger and it is included with raw material which is used in making concrete. Mostly,
the concrete mix involves a ratio of raw material in the order of 1:2:4 (cement: fine
aggregated: coarse aggregate). So, it shows that fine and coarse aggregate are the
largest raw materials needed in making concrete and because of that, recycled fine
and coarse aggregate is commonly used for recycling waste concrete. The criteria to
recycle and reuse of waste concrete are based on the quality of the end product of
waste concrete such as the use of recycled aggregate from waste concrete. Generally,
there are two types of quality for recycled aggregate which are low and higher
quality. The lowest quality of recycled aggregate is used in structure with low load
13
impact and road construction as road base. However, higher quality recycled
aggregate is used as replacement aggregate in normal concrete. There are few
qualities of recycled aggregate: it is based on the quality of the original product and
the degree of processing and sorting of waste concrete. The quality of recycled
aggregate is based on its characteristics and strength. Any contamination with other
material affects the quality of recycled aggregate.
Most countries in managing to recycle and reuse waste concrete, use it in
three types of form namely coarse aggregate, fine aggregate and reused in original
form. In form as coarse aggregate, generally waste concrete is used for road sub-base
application and concrete. A research has been carried out by the Federal Highway
Administration of United States about application of coarse aggregate and found that
the recycled concrete specified to an agreed quality and composition in the sub-base
and base layers can allow the thickness of these layers to be reduced due to the good
bearing properties of the materials. (Lohja Rudus, 2000). This theory supported the
use of waste concrete as a base and sub-base the unbound cementation material in
recycled aggregate was found to have a bonding that was superior to that were from
fines in virgin aggregate such as the strength and a very good construction base for
new pavement.
However, there are common misperceptions about the use of recycled coarse
aggregate from waste concrete should not be used in structural concrete. This
misperception can be changed by promoting the use of recycled aggregate with
proper guidelines and effective regulations. In a developed country, a research has
been carried out recently to promote the use of recycled aggregate and a few
guidelines were provided with. A study by the National Ready Mixed Concrete
Association (NRMCA) in the U.S.A has concluded that up to 10% of recycled
14
concrete aggregate is suitable as a replacement for virgin aggregate for most
applications including structural concrete. (Obla, et al, 2007). It is different from
another study that which was carried out in the United Kingdom, in which the
recycled concrete aggregate can be used up to 20% including structural concrete
(Dhir and Paine, 2007) and in Australia, guidelines stated up to 30% without any
noticeable difference in workability and strength compared with natural aggregate.
(Clarks, Australia’s Guide to Environmentally Sustainable Homes). Based on study
in Australia, a well graded, good quality of recycled concrete aggregate with no
greater than 0.5% brick content had the potential for use in a wide range of
applications. (CISRO, 2007). From another study, a recycled concrete aggregate
could be incorporated into 30-40 MPa concrete exposed to normal environment, but
with some penalties in mix adjustment, permeability and shrinkage properties.
(Dumitru, et al, 1999).
Besides, the waste concrete can also be used as recycled fine aggregate that
will replace the natural sand. However, this may affect the mix in terms of its
workability, strength and shrinkage. These problems occur because recycled fine
aggregate has higher water absorption that could increase the risk of settlement and
dry shrinkage cracking. Based on the study from the U.S.A, recycled fine aggregate
are as good as fill for sub-grade corrections as they can act as a drying agent when
mixed with sub-grade soil. (FHWA, 2004). Recycled fine aggregate can be used in
sub-base or any other applications in aggregate use. It gives alternative resources in
sand washes that are extracted from river or sea.
15
Reuse waste concrete in original form, or cutting into smaller blocks are the
most effective solutions in recycling because there are less processes involved and
less environmental impact generated. However, the markets of this product are
limited and only a few countries use this method in recycling waste concrete. Few
parts of demolishing buildings like slab or beam can be reused by dismantling and
reusing it in another building.
2.3 Type of Cement Replacement.
The rapid increase in development has resulted in the need for building
materials and because of that, proper studies with reliable findings are required to
reduce dependence on natural resources. That is why there is a replacement of
cement work to replace part or the entire cement in concrete. There are a variety of
materials used to replace cement in concrete and they come from special materials
which are natural, industrial waste or recycled materials. Each uses a replacement
material and has different properties from each other, but the nature of the
characteristics that must replace cement is pozzolans reaction. Pozzolanic materials
do not harden in themselves when mixed with water but, when finely ground and in
the presence of water, they react at normal ambient temperature with dissolved
calcium hydroxide (Ca(OH)2) to form strength-developing calcium silicate and
calcium aluminates compounds. (BS EN 97-7:2000,)
It is these properties which are required to function as a binder in concrete
and can increase the strength of concrete. A definition taken from "Pozzolanic and
Cementitious Materials" by Malhotra and Mehta (1996) showed that, a "pozzolan" is
defined as "a siliceous or siliceous and aluminous material, which in itself possesses
little or no cementing property, but will in a finely divided form and in the presence
16
of moisture - chemically react with calcium hydroxide at ordinary temperatures to
form compounds possessing cementitious properties.". Because of that, most of the
reaction in replacement of cement with pozzolans reactions to improve in terms of
compressive strength of concrete and its durability. There are few cement
replacements that are used in concrete which are:
2.3.1 Fly ash
Fly ash is an artificial pozzolan mostly known and results from the
combustion of pulverized coal in electric power plants. Glassy amorphous spherical
particles are the active pozzolanic fly ash. It is important that the coal burned at a
relatively low temperature. At higher temperatures, it turns into crystal glass
particles, rendering them useless as pozzolans. Fly ash is 66-68% glass, on average.
There are two types of fly ash in the industry: Class F fly ash readily reacts with lime
(produced when Portland cement hydrates) and alkali to form cementation
compounds. In addition, for another type of fly ash is Class C, it may also exhibit a
hydraulic drive (cementing) properties. The differences between this fly ash are a
concrete made with Type C fly ash (opposite to Type F) has higher early strengths
because it contains its own lime. Therefore, this allows pozzolanic activity to begin
earlier. At later ages, Type C behaves very much like Type F - yielding higher
strengths than conventional concrete at 56 and 90 days.
Standard percent fly ash utilization in cement replacement varies with the
type of fly ash and based on the standard (ACI Committee 211 2008), fly ash
replacement level of 15-25% is recommended for high-strength concrete. From
numerous reports showed, the substitution of 50% of cement in the binder system
with unprocessed High Calcium Fly Ash resulted in lower early compressive
17
strength (25% and 7.5% lower when comparing to control at 7 and 28 days,
respectively), but final strength was increased 12% at ages of 365 days. ( Anastasiou,
et al, 2014). However, a study by Fereshteh Alsadat Sabet (2013) found replacing
cement with 10% and 20% fly ash also raised the 28-day compressive strength from
62 for control mix to 67 and 80.5 MPa, respectively. Enhancement of compressive
strength of the mixes containing fly ash could be due to filling of the voids between
cement grains by smaller particles of fly ash and also to pozzolanic reactivity of it..
Based on their studies, by replacing cement with fly ash, either type of fly ash that is
used it may increase and improve the durability and the strength of concrete.
2.3.2 Metakaolin
Another material that is used for replacement cement is metakaolin which is
manufactured pozzolan materials and produced by thermal processing of purified
kaolinitic clay. Metakaolin is one of pozzolanic materials which have a size of
average particle less than 2μm and a specific gravity of about 2.5. Metakaolin
admixtures enhance microstructure mainly results from micro aggregate filling and
the pozzolanic effect, fine particles bridge the gaps between cement particles,
hydration products, matrix and aggregates, so pore structure becomes denser as well
as ITZ. (Ping Duan, et al, 2013). The process to make metakaolin by high purity
kaolin clay is heated using thermal activation control to dehydroxylate hydrous
kaolin particles without causing recrystallization structure. The end result is almost
100% reactive pozzolan, which may chemically combine with calcium hydroxide to
form additional cementation products. However, its reaction depends on the purity
metakaolin and kaolin thermal processing conditions. Reactivity metakaolin has been
associated with the content penta-coordinated aluminium ions which are formed
during the dehydroxylation process.
18
There are few studies that have been conducted regarding the use of this
material to replace the cement content and the results of the study showed that with
suitable replacement level, metakaolin inclusion significantly enhanced the
compressive strength within the first 14 days up to 27%. It seems that 10%
metakaolin can be considered as a suitable replacement regarding to the economic
efficiency, fresh and hardened properties of metakaolin concrete. ( Rahmat
Madandoust, & S. Yasin Mousavi, 2012). Among other properties available on
metakaolin is because of the white colour, it does not darken the concrete. Because
of that, it can be used for colour matching and design applications on buildings or
other structures to show artistic value.
2.3.3 Ground Granulated Blast-Furnace Slag (GGBF)
Ground granulated blast-furnace slag is an industrial waste material resulting
from the molten iron furnace slag that was cool using a water-quenching process. In
concrete mixtures, GGBF slag exhibits both characteristics needed in concrete which
is pozzolanic and cementation properties. It contains the same chemical components
as Portland cement, but the amount in each may however differ. As the features of
this material are finely granular, crystal formation by these materials is limited and it
is very cementitious in nature causing mix of cement and GGBF slag, this also
causes it to hydrate like ordinary cement. However, concrete made by GGBF slag are
slow sets compared to the normal concrete made from ordinary cement and it sets
time to these concrete depending on the percentage of GGBF slag in mix. two major
uses of GGBS are in the production of quality-improved slag cement, namely
19
Portland Blastfurnace cement (PBFC) and high-slag blast-furnace cement (HSBFC),
with GGBS content typically in range of 30 to 70%; and in the production of ready-
mixed or site-batched durable concrete.
There are publications by Susanto Teng, et al (2013), about the properties of
high strength concrete incorporating ultra fine Ground Granulated Blast-furnace
Slag. The result showed that the Ultra fine Ground Granulated Blast-furnace Slag
(UFGGBS) used in this study has a large surface area, and thus, more of it is
available for hydration and pozzolanic reactions. With the inclusion of UFGGBS into
the concrete, it is possible to obtain a consistent mix, as the UFGGBS improves the
workability and consistency of fresh concrete.
2.3.4 Limestone
Materials that are often used in replacement of cement in concrete production
are limestone. The chemical properties for limestone mainly consist of calcium
carbonate (CaCO3), which reacts with the tricalcium aluminate (C3A) Portland
cement to form calcium carboaluminate (CCA). The use of limestone in the mix
concrete has been investigated for many years and because of that, there are
standards for the use of this material. According to BS EN 197-1:2000, type II
cements (CEMII/A-LL 32,5/42,5) may contain various materials as their main
constituents in percentages ranging from 6% to 35%. However, the use of limestone
in mix concrete may affect the mechanical and durability performance of concrete.
There is a recommendation based on Lafarge product i.e., an established cement
supplier in the market that replacement amount ranges between 6% and 20%.
20
Another study was conducted to focus on binary and composite of limestone
in concrete. The findings revealed that the compressive strength of the binary
Portland cement and limestone concrete decreased when increasing the Portland
cement replacement level. Based on these results, strength loss was more pronounced
when the replacement level of Portland cement by limestone was higher than 15%
replacement. In environmental concept, the binary and composite cements
significantly contributes to reducing the embodied CO2 emissions compared with
Portland cement. (Mohammed Seddik Meddah, et al, 2013). Through various studies
conducted, it showed that limestone earn significant potential to replace the use of
cement in concrete
21
2.3.5 Rice Husk
Rice husk ash is a waste product resulting from industrial and agricultural
waste. This material is a product resulting from the manufacture husk rice. In
milling, about 78% of rice production is heavy, broken rice and bran. But the
remaining 22% is rice husk. The original use of this husk is used as fuel for the rice
mills to generate steam for the parboiling process. But the use of these fuels produces
large amounts of ash that has no useful immediate applications and usually dumped
into waterways causing pollution and water pollution. The properties of this husk
contains about 75% organic volatile matter and the balance 25% of the weight of this
husk is converted into ash during the firing process, known as rice husk ash (RHA).
RHA in turn contains around 85% - 90% amorphous silica.
From other studies, the chemical composition of RHA depends on
temperature and burning time, but the variations in the components are not
significant. The ash from open-field burning (or from non-controlled combustion in
industrial furnaces) usually contains a higher proportion of non-reactive silica
minerals such as cristobalite and tridymite, and it should be ground into very fine
particles to develop pozzolanic activity. (Gemma Rodríguez de Sensale, 2010).
22
2.3.6 Condensed silica fume
Most material which is used to replace cement content is based on pozzolon
material. An alternative material which is a highly pozzolon is condensed silica
fume. Condensed Silica Fume is also known as micro silica, and it is the product of
surplus high-purity quartz with coal in electric furnaces in the production of silicon,
SiO and ferrosilicon alloys. Besides, it also arises from the production side other
silicon alloys such as ferrochromium, Ferromanganese, ferromagnesium, and
calcium silicon. Combination use of silica fume with others cementations materials
results in reduced water demand compared to mixes containing silica fume. Using
ternary mixes it is also possible to reduce water demand compared to the control
concrete. (Ali Reza Bagheri, et al, 2012). The typical particle size of silica fume is
around 0.1 –0.5 mm and the nitrogen BET surface is 20,000 m2/kg. Once in the
century before the mid-1970s, silica fume was released into the air and then
concerned for the environment due to the accumulation and burial of silica fume,
steps have been taken to use it economically desirable in many applications. In
theory, using condensed silica fume into mix may increase compressive strength,
bond strength, and abrasion resistance; reduce permeability; and therefore helps in
protecting reinforcing steel from corrosion.
There were some studies about replacement cement using silica fume and the
result was observed based on strength and durability performance of concrete
containing silica fume. From this study, concrete with silica fume had consistently
higher compressive strength than the normal concrete. There was a systematic
increase in compressive strength with the increase in silica fume content in concrete
23
at different water/ cement ratios. The utilizations of silica fume led to an
improvement in early age mechanical properties (Erhan Güneyisi, et al, 2012). In
other studies, it was reported that compressive strength of silica-fume concrete was
significantly improved the concrete. The optimal replacement level is 7.5–10% for
silica fume and utilizing pozzolans is more effective in enhancing the durability of
concrete than lowering w/c ratio. (Mahdi Valipou, et al, 2013)
2.4 Impact of Recycled Concrete into New Concrete
Recycling a waste concrete into a new concrete will affect the concrete
situation in terms of load capacity and durability. Many studies have been conducted
especially in developed countries indicating that the use of waste concrete to new
concrete will affect and alter the ability of the concrete. There are a few effects that
mostly been highlighted in the use waste concrete into new concrete:
2.4.1 Compressive Strength
The compressive strength is the most significant factor used in testing the
ability of concrete and it became a benchmark in design a concrete. Most studies
revealed that the uses of waste concrete into new concrete are definitely changing the
compressive strength of concrete. Research conducted in Malaysia revealed that an
increase in a percentage of recycled aggregate of the normal aggregate will decrease
the compressive strength. For this study, the researcher used recycled aggregate from
waste concrete as replacement natural aggregate in different percentage of
replacement from 0 % to 100 % and different water-cement (w/c) ratio from the
range 0.4 to 0.6. The result shows that, increasing percentage of recycled aggregate
24
will decrease the compressive strength up to 43%, however, the strength will
increase due to lowering the water-cement (w/c) ratio. (Suraya Hani Adnan,et al;
2007)
Theory on recycling waste concrete is quite similar to other studies about the
use of waste concrete as replacement raw materials in concrete mix. In other
research, there are 3 different recycled aggregates being used which are RG I for
recycled coarse aggregate having a specific gravity of 2.53 and a water absorption of
1.9%, RG III for recycled coarse aggregate having a specific gravity of 2.4 and a
water absorption of 6.2%, and RS II for recycled fine aggregate having a specific
gravity of 2.36 and a water absorption of 5.4%. The percentages of replacement are
in the range 30 % to 100% or replacement natural aggregate. The result shows that,
compressive strength of concrete using recycled coarse aggregate with lower
absorption (RG I) was similar to that of the control specimen. However, compressive
strength of concrete containing both higher absorption fine and coarse aggregates,
RS II or RG III, was 60 to 80% of the control specimen at early ages of 1 and 3 days
and slightly improved with the increase of age. It can be conclude that, the
compressive strength of the recycled aggregate increased due to the age and the
increase percentage of replacement recycled aggregate will affect the decrease of the
compressive strength. (Keun-Hyeok Yang, et al; 2008).
There are studies about the influence in strength of waste concrete before it is
recycled due to a percentage of replacement in new concrete. A study are conducted
with three different concrete grades (40 MPa, 60 MPa and 100 MPa) where crushed
concretes were used as coarse recycled aggregate concrete for high performance
concrete production. According to these studies, recycled aggregate concrete which
is made from waste concrete grade 40 can be used to produce high strength concrete