The Lubricity Test - X-REV ZeroFriction Engine Oil Test.pdf · 23 ¾The Lubricity test clearly demonstrates that Xrev ZeroFriction TM Metal Treatment Formula is at least 3-4 times

The Lubricity Test

2

X r e v Z e r o F r I c t I o n TM

3-in-1 Anti-Friction Metal Treatment Formula

Smoother. Quieter.M o r e P o w e r.

1. Proprietary Anti-Friction Metal Treatment Formula which bonds molecularly to the metal surfaces inside the engine, coating thepiston and chamber;

2. Superior additive package of detergents, dispersants, buffers, solvents, corrosion inhibitors, viscosity index improvers & emergency lubricants to clean and protect the engine; and

3. Premium Performance Fully Synthetic Base Oil which maintains itsmulti-grade viscosity even under extreme conditions

3

Step 1

“Lubricity” refers to the effectiveness of a lubricant to reduce friction. The Lubricity Test, therefore, is a comparative test of various brands of engine lubricants to determine which is the most effective friction modifier.

Xrev ZeroFrictionTM Formula

4

Step 2

The Lubricity Testing Equipment basically comprise of a rotatingbearing (driven by an electric motor), which is in direct contact with a stationary bearing. The pressure at the point of contact between the two bearing is controlled by stacking metal plates (each weighing approximately 1.5 lbs).


Electric Motor

Rotating Bearing

Stationary Bearing

Stack for loadingmetal plates

Lubricity Testing Equipment

5

Step 3

3 different brands of lubricants were tested : Brands A & B, both of which are the leading brands of engine oil locally, and the Xrev ZeroFrictionTM Metal Treatment Formula.


6

Step 4

Brand A was the first to be tested. The lubricant was applied liberally over the rotating bearing.


7

Step 5

The device is then switched on, causing the rotating bearing to rotate.


8

Step 6

The metal plates are then added one at a time. With 3plates on the stack, the rotating bearing seized up.


3 metal plates

9

Step 7

The rotating bearing seized up and stopped rotating.


Rotating Bearing Seized up

10

Step 8

The stationary bearing was then removed from the device and examined.


11

Step 9

The result was that quite a large depression was made on the stationary bearing (Brand A).


Brand A

12

Step 10

The test was repeated with oil from Brand B.


13

Step 11

This time, when the device was switched on, and the metal plates were added, one at a time, the rotating bearing seized up when the 4th metal plate was placed on the stack.


4 metal plates

14

Step 12

The rotating bearing seized up and stopped rotating with the addition of the 4th metal plate.


Rotating Bearing Seized up

15

Step 13

The stationary bearing was removed from the device and examined.


Stationary Bearing

16

Step 14

The size of the depression on the stationary bearing (using Brand B lubricant) was slightly smaller compared to the previous test (using Brand A lubricant).


Brand B

17

Step 15

Finally, the test was repeated with Xrev ZeroFrictionTM

Metal Treatment Formula.


18

Step 16

With the device switched on, the metal plates were continually added until all 12 metal plates were placed on the stack – and the rotating bearing was still rotating! Simply Amazing!


19

Step 17

The stationary bearing was then removed from the device and examined.


20

Step 18

Unlike the previous tests, there wasn’t a depression – only a slight nick just visible to the naked eye!


21

Step 19

In this side-by-side comparison, it is clear that the bearing on the extreme right (testing Xrev ZeroFrictionTM Formula) suffered the least friction during the test even with all 12 metal plates load on the testing device (compared to 3-4 metal plates in the same tests for Brands A & B respectively).


B XREVA

22

Step 19

Xrev ZeroFrictionTM Formula is able to withstand at least 3-4 times the load compared to the other brands tested. This means that it is 3-4 times more effective in reducing friction.


02468

1012141618

1 2 3

A B

Xrev

Zero

Fric

tion

Lubricant Brands Tested

Load (lbs)

0

2468

1012141618

23

The Lubricity test clearly demonstrates that Xrev ZeroFrictionTM

Metal Treatment Formula is at least 3-4 times more effective in reducing friction in your engine.

Creates a molecular bond to the metal surfaces inside the engine, providing a protective coating on the piston and chamber, eliminating any metal-to-metal contact

Significantly reduces friction and heat

Delivers a smoother and quieter acceleration, with more power released to the wheels.







Documents

The Lubricity Test - X-REV ZeroFriction Engine Oil Test.pdf · 23 ¾The Lubricity test clearly demonstrates that Xrev ZeroFriction TM Metal Treatment Formula is at least 3-4 times