Embed Size (px)
Citation preview
1
Taiwan Fuel Cell Partnership
Taiwan Institute of Economic Research
2020.10
The Introduction of Fuel Cell Industrial
Development in Taiwan
Meg J. C. Lin, Ph.D.
2
Outline
1. The Introduction of TIER WEEE Research Group
2. Taiwan Fuel Cell Partnership (TFCP)
3. Fuel Cell Industrial Development in Taiwan
2
About TIER◼ The Taiwan Institute of Economic Research (TIER) was established on September 1, 1976 by Dr. Chen-Fu
Koo as the first private independent think tank in Taiwan. The main purpose of the institute is to activelyengage in research on domestic and foreign macroeconomics and industrial economics in order toprovide consultation to the government and enterprises and to promote Taiwan’s economicdevelopment.
◼ For the past 40 years, TIER successfully built its professional reputation among other think tanks in Taiwan.Research reports, industrial consultations, economic forecasts, and various publications produced by theinstitute are highly acclaimed.
◼ TIER actively participates in dealing with international affairs and this enables it to gain a solidunderstanding of global trends, to provide forward-looking analysis with a global perspective, and toformulate optimal policy alternatives for both businesses and the government.
◼ The TIER Research Division I is dedicated to research in renewable energy, especially bio-fuel (bio-ethanoland bio-diesel), offshore wind energy, and other new energy sources.
3
經濟能源環境政策評估模型
3E Model
燃料電池Fuel Cell
深層地熱發電Geothermal
淨煤封存技術IGCC+CCS
技術經濟分析Techno-
Economic
生命週期評估Life Cycle
Introduction of TIER WEEE Group
Taiwan Institute of Economic Research (TIER) is the first privately funded, independent research institute in Taiwan. Research Division I is specialized in macroeconomics, energy
research, industrial analysis, and financial regulation.
Division I WEEE Group
生質能Biomass
風力發電Wind Energy
智慧電網Smart Grid
低碳城市Low Carbon
Society
綠色載具Green Vehicle
太陽光電Photovoltaics
精緻碳材Carbon Material
水資源Water Resource
海流發電Ocean Energy
◆ New Energy Industrial Promotion◆ Econometric Model Analysis◆ Sustainable Water Resource
3
High Power Device
Application And
Research Alliance
Taiwan Organic
Photovoltaic Industrial
Research Associations
Taiwan Fuel Cell
Partnership
Taiwan Smart Grid
Industrial Association
Taiwan Small &
Medium
Wind Turbine
Association
Taiwan Biomass
Energy
Industrial Association
Taiwan Association
for
Superior Service
Brands
Taiwan Carbon Material
Industrial Association
Taiwan Renewable
Industry Promote
Association
Taiwan Strategic
Institute for
Environment and
Resources (TSI)
Taiwan Industrial
Competitiveness
Promotion Association
Taiwan Green Energy
Boat
Industry Association
Taiwan Health Care
Industry Alliance
Taiwan Aerospace
Additive Manufacturing
Industry Association
Aerospace Technology
and Industry
Innovation Platform
Taiwan Renewable
Energy Certification
Association
Taipei Fuel Cell
FoundationIoT Technology
Innovation Platform
Industrial Integrations and Promotion Platforms
Taiwan Fuel Cell Partnership
◼ To develop knowledge and application of fuel cell in society.◼ To promote fuel cell research and development, as well as
business opportunities in Taiwan.◼ To establish a good foundation and environment for the
development of fuel cell technology in Taiwan.◼ To promote the diversification of fuel cell technology and
industry as well as the development of efficient businessprocesses.
◼ Continue to promote the importance of fuel cell technology and industry within all industries in Taiwan.
◼ Total 44 members.
⚫ Website：http://www.tfci.org.tw/
⚫ Fanpage 6
7Fuel Cell Demonstration Site in Taiwan
7
◼NCC’s Project of Subsidies - fuel cell for disaster-resistant information communication platform for backup power.◼Actual setting cases: TIER has assisted the whole station to complete 11 cases.
National United University2016； 26kW
National Taitung University2017；26kW
National Chung Cheng University2016； 25kW
Community center in Wuliao2017； 20kW
Department of Sports, Taipei City Government2015； 20kW
Community center in Shuangxi Dist. 2017； 20kW
National Dong Hwa University2017；25kW
National Taiwan Ocean University2018； 20kW
National Sun Yat-sen University2018；22kW
Fuel Cell Demonstration Sites by TIER
a source of information：GTPO Website, 2015; Toplus Website, 2017; TIER
8
Lala Mount Visitor Center2018；15kW
Huafan University 2019；15kW
9
◼ Since 2018, our research team has assisted the local government with the establishments of fuel cells for backup power system. As of2020, the research team had already installed fuel cells for backup power system in 5 places, including smart communities in NewTaipei, 235 Environment and Green Energy Educational Center in Chiayi County , Heyao cultural park in Taoyuan City, Kuihui villageoffice room in Taoyuan City. Our team keeps approaching other places for the establishment.
2018, Taipei Boer Community in New Taipei City (5kW)
2018, 235 Environment and Green Energy Education Center in Chiayi County (5kW)
2019, Heyao cultural parkin Taoyuan City (5kW)
2019, Kuihui village office room in Taoyuan City (5kW)
Rural AreasEducational Center
Buildings
Cultural Park
2018, Fengjingcuifeng Community in New Taipei City (5kW)
Buildings
Fuel Cell Demonstration Sites by TIER
10
原材料(上游)
電池組件(中游)
系統應用(下游)
周邊產品
10
原材料(上游)
電池組件(中游)
系統應用(下游)
周邊產品
雙極板 電池組 系統 氫氣供應 系統周邊零組件
亞太 工研院 工研院 高力熱處理 三福氣體 高力熱處理
恩良 中科院 台電 恆昌精密 聯華氣體 康舒
順德 核研所 光騰光電 安華機電 亞東氣體 保來得
禾新 光騰光電 亞太 億鴻系統 台灣中油 亞太
鼎旭 博研 博研 協同能源 甲醇供應 宏進
碳布、碳紙 鼎佳 核研所 碩禾 伊默克 台達電
碳能科技 中興電工 美菲德 車測中心 李長榮公司 漢鐘精機
觸媒 亞太 鼎佳 富堡能源 甲醇燃料罐 光洋應用
碧氫科技 新力 中興電工 聯合再生 奇鋐 元寧
重組器 繼茂 光陽 恩柏科技 儲氫合金罐
工研院 順德 群翌 聯盛數位 漢氫科技
碧氫科技 九豪 新力能源 鐙鋒綠能 博研
高力熱處理 璞真能源 亞洲氫能 亞太
中興電工 膜電極組 錫力科技 旭陽科技
俊鼎 揚志 漢氫科技
臺禹科機 光騰光電 加百裕
信通 亞太 能碩
律勝科技
Fuel Cell and Hydrogen Supply Chain in Taiwan
11
Company
Chung HsinElectric &
MachineryToplus Energy M-Field M-Field HiPower
Product
ISCCE, AMSI/CSA FC-1
Telcordia GR-63-CORE seismic Zone4
ISO 9001:2008ITRI TAF ukac-MRA
ULCSA, UL UL CSA
Fuel Methanol HydrogenHydrogen,
Sodium BorohydrideMethanol,Natural Gas
Methanol
Stationary Fuel Cell Power Systems
location：UK Telecom Towertime：2010~2012
location：Canada NRCtime：2012.4~now
location：Canada Torontotime：2012.5~now
美菲德
location：China(5kW)time：2011.11~now
location：China (5kW)time：2013.3~now
鼎佳能源
location：China (5kW)time：2013.9~now
Location: Africatime: 2017~now
Stationary Fuel Cell Power Systems- Overseas Cases
12
中興電工
Transport Applications
APFCT BOYAMKYMCO YC Synergy
13
Aeon
Cell phone charger1W
•Electric output ：20 W-60 W•Dimensions ：L 20cm x W 11.6cm x H 25.6m •Mass： 2.0kg
•Electric output ：1W-8W•Dimensions ：L 14.3 x W 9.0x H 2.6 cm3
•Mass： 320g
Portable generators20W
Portable Fuel Cell Products
DMFC Power generator20~60W
DMFC Power generator8W
•Electric output ：20 W-60 W•Dimensions ：L 42cm x W 18cm x H 23cm (20W)•Mass： 3.3kg
•Electric output ：8W•Dimensions ：L 24 x W 23 x H 25 cm3
14
•PEMFC drone•Maximum load capacity: 30kg
UAV
Conclusions and Discussion Taiwan is the world's top producers in the machine tool industry. Quality and reliability of products,
comprehensive supply chains, and cross-domain integration are all of our most significant advantages.
Through vertical and horizontal integration, Taiwan's green industry could provide a set of totalsolutions, such as solar and wind energy, fuel cell, energy storage, and customized powermanagement systems.
In terms of geographical location, Taiwan is the heart of Asia and has actively legislated for the high-tech industries, propelling the countries to prosperity from a relatively recent agrarian base.
The engineering industry in Taiwan provides not only fast and high-quality products but also protectsinternational fuel cell firms' intellectual properties from being pirated. Despite the fact that theTaiwanese market is relatively small compared to Europe, it is still a valuable manufacturing site forinnovative products.
Taiwan Fuel Cell Partnership (TFCP) is an international cooperation platform between Taiwan, Franceand EU:
◼ The French Hydrogen Plan 2018-2020, the France Relance 2021-2023
◼ Collaborative project for innovative hydrogen technologies by IPCEI.
◼ Collaborative project by FCH JU (The three members of the FCH JU are the European Commission, fuel cell andhydrogen industries represented by Hydrogen Europe and the research community represented by theResearch Grouping N.ERGHY.)
Thank you for your attention!
Taiwan Fuel Cell Partnership (TFCP)http://www.tfci.org.tw/
16
Meg J. C. Lin, Ph.D.TEL:886-2-2586-5000 Ext.866E-mail:[email protected]
Taiwan has a mature and complete fuel cell industry chain, providing internationalmanufacturers with excellent quality and affordable (cost down) fuel cell products andrelated key components.
Taiwan's AcBel is the only business offeringan electrical management system to the US'sBloom Energy.
Bloom Energy’s 100 kW SOFC Generator- Kaori is the main Hotbox supplier for 100 kW SOFC system.
Plus Mental Tech is an interconnect coating manufacturer. 5years ago, it invested in FC manufacture. It is currentlyBloom Energy's main supplier.
Porite manufactures SOFC interconnect plate. Itsupplies Bloom Energy.
17
Kaori Heat Treatment CO., LTD.
◼Materials: Inconel (600/625) and stainless steel (SUS 304/310/316)◼ Temperature range: 60~70°C to 900~950°C
Brazed plate heat exchanger
Key manufacturer's major products
Hydrogen Fuel Cell PowerSystem -CHP System
◼ Stack: PEMFC ◼ Power output: 3~5 kW◼ Elect. efficiency: >30%◼ Hot water: 55℃
18
CeTech Co., Ltd.
◼The CeTech Gas Diffusion Layer (GDL) is speciallydeveloped as a carbon fiber paper and carbon fiber clothfor PEMFC and DMFC fuel cell applications.
Yangtze Energy
Technologies, Inc.
◼ With the ability of MEA formulation developing and MEA manufacturing, Yangtze can provide fuel cell membrane electrode assembly (MEA) technology transfer and package production plant export such as roll-to-roll CCM production and automatic 7-layer MEA assembly with guaranteed MEA performance.
◼ 10,000 m2/year MEA production line
◼ 30,000 m2/year MEA production line
◼ 50,000 m2/year MEA production line
◼ We also offer paid customized samples production for batches of 100-2,000 pieces MEAs.
Carbon Paper MEA
19
Plus Metal Tech Co. SDI Corporation
◼ High precision stamping technology.
◼ SDI in-house metal forming and anti-corrosion film coating process.
◼ 10 times bending depth by progressive stamping.
Mass production for SOFC Interconnect coating
◼Services✓ Fully automatic mass production✓ Quality inspection and coating analysis
◼Capacity✓9 million parts/ year
◼Coating material ✓ Perovskite and spinel structural materials.
TS-High velocity
oxygen flame spray
TS-Plasma spray TS-Spray & fusion
TS-Arc spray Hardfacing-
Open ARCHardfacing-
Submerge
SDI Metallic Bipolar Plate for PEMFC
Metal Bipolar
Plate
Precision Stamping
TechnologyFuel Cell Stack
Laser Welding Technology
Nano Coating TechnologySilicone Injection Sealing
20
Leadtech International
Co.
◼ Leadtech Co. works on the design and development of precision stamping dies.
Auto industry Industrial field Connectors
3C stamped parts Cold forgedparts
Fine Blanking
Deep drawing
In die riveting
Uni-Calsonic Co.
◼ Car、Motorcycle & ATV Engine Cooling System
◼ Cooling System for Green Energy and Electronics Industry
Metal stamping productionAluminum cooling parts
LEATEC Fine Ceramics
Co., LtdIntegrated Plasma Inc.
◼ IPI has a strong R&D team focus on local scrubbers, ammonia reformer.
◼ Ammonia Reformer
✓ No need to move cylinder as hydrogen can be produced
in site
✓ Zero carbon emission in the process
✓ Hydrogen can be produced
consecutively 110 L/m ~ 225L/m
✓ Energy conservation through the
new type heating method
✓ Only around 6 KW power
consumption at the first 30 mins
after power-on
✓ Less than 1 KW power consumption
during the subsequent operation
✓ Can be applied to all the relevant processes those need
hydrogen
◼ The professional manufacturer of fine ceramic substrates
✓ Alumina substrate
✓ Aluminum nitride substrate
✓ High reflective alumina and ZTA substrate
✓ Transparent optical ceramic
✓ Dry press parts: cavity and core
◼ Development of SOFC cell and stack/module
technology
Ceramics Technology for SOFC Single Cells and Stacks
Ammonia Reformer
22
YC Synergy Co.,Ltd
23
Hephas Energy
Co., Ltd.◼ YC SYNERGY was founded in 2012 by a group of
expert in energy industry. We have long history indeveloping hydrogen and fuel cell technology andother application around it.
◼ Performance:
-Maritime fuel cell systems
-Distributed power station applications
◼ Certification:
-ISO 16750 compliance
-China national automobile fuel cell system
standard (GB)
Fuel Cell Expert
General Optics
Corporation
24
Hydrogen generator Hydrogen Modules
Delivery rate 20cc/min Operating pressure＜
0.5bar Power demand DC 24V Water consumption＜
15W Water demand＞
1MΩ‧cm Size 160*190*65mm Weight 950g
Purity of gas 99.99% H2 Output pressure(Max.)
5bar H2 Delivery rate 100c.c./min Water consumption
0.12c.c./min Size(LxWxH)
450x150x300mm Weight 11.7Kg Pressure protector, Anti-
tilting device, switch-on detector, inner hydrogen leak detector
◼ Green Hydrotec, Inc. (GHT) has the world's leadingtechnology of converting methanol to hydrogen for theon-site production of >99.9999% hydrogen requiresonly 40 min cold start for long time steady operationover 29,000hr. The GHT onsite production of hydrogenhas been widely used in Taiwan, PRC and Japan to helpusers reduce dispensing cost of 40-60%.
◼ The GHT generators has a capacity of 5, 10, 15, 20, 25,35 and 50NMh of >99.9999% hydrogen and can becomposed to 5-300NMh for various applications. A20NMh hydrogen generator is very compact in a bookcase and a 100NMh facility can be installed in a 20ftcontainer.
Green Hydrotec, Inc.
High purity hydrogen generatorMobile hydrogen generator
Linde Lienhwa
Industrial Gases Co.
Ltd.
→ Pipeline
→ Bulk
→ On-site distribution
→ Cylinder
Linde Lienhwa is a recognized leader in:
→ Safety
→ Reliable supply
→ Innovative technology
→ On-time project delivery
→ Sustainability performance
Supply Mode:
Hanbell Precise
Machinery Co., Ltd.
Semi-Hermetic Screw Compressor
Centrifugal Compressor
Air Screw Compressor
Industrial Technology
Research Institute
Natural-gas-fueled SOFC
Renewable Energy and Fuel
Cell Combined System
Taiwan Power
Company
◼ Founded in 1946.
◼ Installed capacity (2018)
✓ Taipower system 44.51 GW
(Taipower-owned 33.16 GW)
✓ Power generated and
purchased: 283.91 GWh
26
Domestic 1kW FC System verified in lab
Metal bipolar plate
Hydrogen station
Domestic FC R&D
Institute of Nuclear
Energy Research
CPC Corporation, Taiwan
Green Technology
Research Institute
27
(1) Fabrication of the broad-temperature-range ceramic substrate supported solid oxide fuel cells by tape casting-screen printing processes and metal supported cells by plasma spraying techniques.
(2) Automation of the stack assembling processes and design of new stack models and parts to integrate into the INER-III SOFC system.
(3) Development of the thermally self-sustained 5 kW SOFC power generator and balance-of-plant (BOP) components in a compact structure, designated as the INER-III system.
(4) Manufacture of fuel reforming catalysts of a conversion rate higher than 95% with the innovative invention of ring-shape and honeycomb shaped carriers.
Nature Gas type Micro Fuel Processor
For 1 kW PEMFC For 5 kW SOFC
