Silica – it’s more than just dust!j

The health hazards of silica (quartz) in construction work

Division of Occupational Safety & Health (DOSH)

Purpose of this trainingThe purpose of this training is to alert your employees to the The purpose of this training is to alert your employees to the serious health hazards of silica dust. The DOSH hazard communication regulations require training employees exposed to hazardous chemicals and dusts including silica. g

DOSH also regulates employee exposure to silica by setting a “permissible exposure limit” for silica in the air which cannot be exceeded If this limit is exceeded employers are required to exceeded. If this limit is exceeded, employers are required to control employee exposure by reducing dust levels or providing respirators.

Silica exposure can occur during sandblasting grinding or Silica exposure can occur during sandblasting, grinding or cutting concrete or bricks, rock drilling, and sand and gravel operations.

1

How to Use this PowerPoint Program

• Users with PowerPoint can download, edit, and use the program for training with a laptop and multimedia projector multimedia projector.

• Additional information is found in the Notes section of this presentation. You can read the text in quotations, or use your own words.

• If you want to print out this program, the PDF file uses less computer memory and prints faster.

2

Silica – What topics will be covered

What is silica?

What are its health hazards?What are its health hazards?

What are the human exposure limits?

Where is it used or found in construction?

How can it be controlled?

What about respirators?

What is Silica?Silica is Quartz

Quartz (silica) is found naturally Quartz (silica) is found naturally in almost all rock, sand and soil.

It is also found in concrete products and bricks.

It is sometimes found in It is sometimes found in sandblasting (abrasive blasting) grit and is called “silica sand”.

4

Silica Health HazardsInhaled silica dust scars the lungs

A lung disease called “silicosis” is caused by breathing of dust containing silicacontaining silica.

The dust causes “fibrosis” or scar The dust causes fibrosis or scar tissue formation in the lungs.

This reduces the lung’s ability to extract oxygen from the air.

There is no cure.5

Silica Health HazardsWhat are the symptoms of silicosis?

Early stages go unnoticed.

Continued exposure results in Continued exposure results in shortness of breath during exercise.

Prolonged high exposure can lead to extreme shortness of breath, chest pain, respiratory failure and death.

6

Silica Health HazardsOther Health Effects

Susceptibility to other lung diseases and infections such as tuberculosistuberculosis.

Acute silicosis may develop after Acute silicosis may develop after very short periods of high exposure.

Chronic silicosis develops after many years of lower levels of many years of lower levels of exposure.

7

Silica Exposure LimitsIs there a safe limit for silica?

I th i 100

The safest amount of silica in the air is zero.

In the air – 100 micrograms per cubic meter

This is the legal limit set by L & I - DOSH.

The legal limit is called a “permissible exposure li it” “PEL”limit” or “PEL”.

This limit is for

Rule-of–thumb: if dust containing silica is visible in the air, it’s almost always This limit is for

respirable (fine) dust.

, yover the permissible limit.

8

Silica Exposure in ConstructionSilica is found in many construction jobs

Ab i bl ti ( d bl ti )• Abrasive blasting (sand blasting)• Rock drilling• Concrete & masonry building construction• Concrete & masonry building construction• Earthwork and rock crushing• Masonry or concrete building demolitionMasonry or concrete building demolition• Road construction and repair

9

Silica Exposure - SandblastingSilica Exposure Sandblasting

Sandblasting with silica sand creates extremely high levels of silica dusthigh levels of silica dust.

Sandblasting on concrete with any kind of grit with any kind of grit produces high levels of silica dust.

Sandblasting alwaysrequires the use of a

He needs an abrasive blasting respirator!q

respirator.

10

Silica Exposure – Rock Drilling

Rock drilling without Rock drilling without water produces large amounts of dust.

Drilling without water

Your actual exposure will depend on the wind, where pyou stand and if you use water to control the dust.

11

Drilling with water

Silica Exposure in ConstructionConcrete Work

J k h i Power sandingJack-hammering Power sanding

Generates moderate to heavy amounts of dust Generates heavy

amounts of dust

12

Silica Exposure –Concrete Highway work

Drilling concrete pavement dry

Generates moderate amounts of dust

13

Silica Exposure – concrete cutting p gwithout water

Generates large amounts of dust

14

Silica Exposure – brick and cinder pblock cutting

With t tWithout waterWith water

Generates moderate to heavy amounts of dust without water.

15

Silica Exposure - Tuckpointing

Generates heavy amounts of dust without water

16

Silica Exposure – cutting idi i h concrete siding with power saws

On some new construction, a ,lightweight concrete siding (hardiplank) is being used.

Cutting this siding with a ith t t power saw without water or

ventilation can result in silica overexposure.

17

Our Worksite Silica ExposureOur Worksite Silica Exposure

Y b d ili d i h f ll i j b You may be exposed to silica during the following job activities and/or locations:

18

The Risk of Silica Exposure

When dust is controlled exposures are low

The Risk of Silica Exposure

When dust is controlled, exposures are low.

When dust is uncontrolled exposures are When dust is uncontrolled, exposures are high.

Many exposures are for short time periods, but at very high concentrations.

Short, high exposure can still exceed i ibl li it d l dpermissible limits and cause lung damage.

19

Silica dust exposure can be controlled by use of water or exhaust ventilation

Using water to cut concrete Using water to cut concrete and bricks

Concrete sander with exhaust ventilation

20

Silica Exposure Control - Sandblasting

The best control is to not ili duse silica sand.

Substitutes include garnet, Substitutes include garnet, glass beads, aluminum oxide, or iron oxide.

If silica sand is used, keep other workers away from area.

If workers must be in the th ill d t

21

area, they will need to wear respirators too.

Silica Exposure Control

Avoid dry sweeping and use of compressed air on concreteon concrete

Both these activities can stir up large amounts of dust Both these activities can stir up large amounts of dust. Use a vacuum with high efficiency filters when possible.

22

Our Worksite control measuresOur Worksite control measures

h l dWater or exhaust ventilation is required on the following jobs or tasks:

23

Silica and Use of RespiratorsRespirators must be used if silica dust can’t be

controlled with water or ventilation

oreither

Air-purifying respirator with dust cartridge

Supplied air respiratorg

24

Sandblasting Respirators(Abrasive blasting hoods)

Sandblasting with silica sand requires a full sandblasting requires a full sandblasting hood.

The sandblaster helper will also need a respirator. Nearby p yemployees may need respirators, also.

25

Our worksite respirator requirementsp q

Respirators are required for the following jobs or tasks:Respirators are required for the following jobs or tasks:

26

Respirators Must Fit Properlyp p y

Respirators must fit properly to prevent leaks around the to prevent leaks around the edges.

Fit-testing must be done Fit-testing must be done before first wearing a respirator.

Beards are not allowed when wearing a respirator.wearing a respirator.

28

Employees using respirators must be trained

Training is required by DOSH for anyone who wears a respirator.

If you don’t know how to use a respirator properly, you may think your you may think your respirator is providing protection when it is not.

27

Silica in ConstructionSilica in Construction

The next slides are optional quiz questions

Silica in Construction Quiz

Question 1

Where is siica found?

a) In polluted air in big cities.

b) In concrete, bricks and sand.

c) In certain chemicals.

Silica in Construction Quiz

Question 2

Why is dust containing silica so dangerous?

a) Because it can cause permanent damage to the lungs.

b) It can make it hard to see.

c) It can get in your eyes and damage them.

Silica in Construction - QuizQ

Question 3

Why must you be clean-shaven to wear some respirators?

a) The respirator will slide off a beard.

b) We want a clean-cut look in this company.

c) Some respirators will leak even with short stubble.

d) Beards interfere with breathing through a respirator.