The EDiS Idea

Always ahead in IndustrialDistribution 25 yearswww.edis.eu

The EDiS Idea

Always ahead in IndustrialDistribution 25 years

2 3



Aims Members

The peopleA team of open minded experts, well-trained and aware of

how important it is to keep up with changes, requirements of

markets and uses who are more and more sophisticated and

demanding.

The forming of such men is followed by EDiS which prepares

them and constantly keeps them up to date to make them the

ideal partners of their own customers.

The productsTechnical articles, hoses and couplings, rubber and plastic

materials, safety products: a large variety of supplies characte-

rised by quality and competitive prices. The EDiS products are

a safe investment owing to the continuous research of the best

supplying sources. The constant selection of the innovative

proposals, the presence of warehouses in various European

countries and a deep distribution of products are three other

main points in the EDiS cooperation.

The marketThe aims of EDiS are to know each market to interprete their

specific requirements, to anticipate the customers‘ necessities

thanks to the exchange of partners and updating of products.

Such aims are reached through a continuous monitoring, made

by its members, about the evolution of customers‘ necessities

in the different markets. The growth of group members will

gradually cover all Europe and each member will operate in his

own area.

The membersAustria – Haberkorn GmbH 4

Denmark – S&K GROUP A/S 6

Germany – Jäger Group 8

Germany – REIFF Technische Produkte GmbH 10

Italy – CENIgomma s.r.l. 12

Netherlands – Imbema Group 14

Norway – TESS as 16

Poland – Tubes International Sp. z.o.o. 18

Spain – Comercial Gasso S.A. 20

Sweden – Lundgrens Sverige AB 22

4 5

Product lines

Facts

Always ahead in IndustrialDistribution


Company ManagementEDiS Management Representative Dr. Wolfgang Blum (Wolfurt)

EDiS Coordinator Mag. Sybille Gruber (Wolfurt)

Delegates to the EDiS expert groups Hydraulic Hoses & Fluid Power Gerhard Plasser (Wolfurt) Industrial Hoses Georg Kirschner (Vienna) Rubber Sheeting & Moulded Parts Thomas Samsinger (Vienna)

n Established in 1932

n Family owned

n Strategic business units:

n Industry

n Construction

n Special product lines

n Austria‘s largest technical retailer

n Leading player in Eastern Europe (CEE)

n Multispecialist – from personal protective equipment, divers technical products to lubricants

n Innovative logistic services and e-business solutions

Company ProfileTurnover Austria ~ 227 Mio EURO Group ~ 327 Mio EURO

Employees Austria ~ 800 Group ~ 1300

Average stock value Austria ~ 35 Mio EURO

Branches Austria, Bulgaria, Croatia, Czech Republic, Hungary, Serbia, Slovenia, Switzerland

Company AddressHaberkorn GmbH, Wolfurt

Telephone +43 | 5574 695 0 Telefax +43 | 5574 695 99 Address Hohe Brücke A-6961 Wolfurt Internet www.haberkorn.com E-Mail [email protected]

Haberkorn GmbH, Vienna

Telephone +43 | 1 74074 0 Telefax +43 | 1 74074 99 Address Modecenterstraße 7 A-1030 Wien Internet www.haberkorn.com E-Mail [email protected]

Safety products

Technical products

Building products

Hoses and fittings

Connecting elements/ components

Hydraulics

Power transmission

Profile and Conveyor technology

Lubricants

Austria Austria

6 7

Product lines

Facts



Sørensen & Kofoed A/S: Hydraulics

Hoses & Couplings Rubber Sheets & Mats

Instruments Lifting Equipment

Transmissions Seals

BS Specialslanger A/S: Metal Hoses Pneumatics

Cable Protection

Linatex A/S: Technical plastics

Rubber Composite materials

In house productionSørensen & Kofoed A/S:

Hydraulic hoses Rubber parts

Gaskets

BS Specialslanger A/S: Hydraulic hoses

Steel hoses

Linatex A/S: Technical Plastic parts

Composite parts

Denmark Denmark

Company ManagementEDiS Management Representative Flemming Søeborg Sørensen

EDiS Coordinator Claus Nielsen

Delegates to the EDiS expert groups Hydraulic Hoses & Fluid Power Kasper Høier Nielsen, Flemming Johansen Industrial Hoses Flemming Johansen Metal Hoses Niels Lorentzen, Henrik Christensen Rubber Sheeting & Moulded Parts Flemming Johansen

Company ProfileSince 1960 supplier of technical quality products for shipyards, agriculture, offshore, auto, pharma-ceutical, oil, cargo and silo industries, ventilation, building industries, chemicals, fish and food industries

Employees ~ 100 Storeroom ~ 20.000 m2

Average stock value S&K GROUP total ~ 5,5 Mio EURO

Linatex A/S, Herlev www.linatex.dk | [email protected]

Company AddressS&K GROUP A/S

Telephone +45 | 44 92 10 88 Telefax +45 | 44 92 22 66 Address Smedeholm 7 – 9 DK-2730 Herlev Denmark Internet www.skg.dk E-Mail [email protected]

Branches/ Subsidiaries Sorensen & Kofoed A/S www.skdk.dk | [email protected]

BS Specialslanger A/S, Glostrup www.bssp.dk | [email protected]

n Established 1960

n Family owned

n More than 300 resellers

n More than 800 outlets

n Certificates and approvals: Sørensen & Kofoed A/S: MED Certified Foodstuff Regulation EC 1935/2004 Linatex A/S: DS/EN ISO 9001:2008 Foodstuff Regulation EC 1935/2004 Achilles JQS Achilles Power and Tech BS Specialslanger A/S: Lloyd`s Register of shipping Deutscher Verein des Gas- und Wasserfaches PED AT743 – CE 97/23/EEC Foodstuff Regulation EC 1935/2004 ATEX Germanischer Lloyd Det Norske Veritas (DNV) Bureau Veritas

8 9

Product lines

Facts



Germany Germany

Company ProfileKey figures of Jäger Industrial Products Branch

Turnover ~ 203 Mio EURO including approx. 10 Mio EURO industrial supplies

Employees ~ 1.000

Average stock value ~ 17 Mio EURO

Subsidiaries/Affiliate companies

Jäger Gummi und Kunststoff GmbH, Hanover and 9 other locations in Germany

Jäger Automobil -Technik GmbH

Jäger Umwelt -Technik GmbH

Company AddressJäger Gummi und Kunststoff GmbH

Telephone +49 | 511 53 58 0 Telefax +49 | 511 55 33 94

Address Bissendorfer Str. 6 D-30625 Hannover Germany

Internet www.jaeger-gk.de E-Mail [email protected]

Main product segments:

Fluid technology

Molded Parts in rubber and plastics

Hoses

Vibration Control

Gasket technology

Power transmission and conveyer belt service

Company ManagementEDiS Management Representative Dr. Ing. Andreas Jäger Hans-Ulrich von Tippelskirch

EDiS Coordinator Hans-Ulrich von Tippelskirch

Delegates to the EDiS expert groups Industrial Hoses & Metal Hoses Ann-Christin Beck Rubber Sheetings & Moulded parts Thomas v. d. Wardt

n Founded in 1942 by Arnold Jäger sen. as Arnold Jäger – rubber products, asbestos, industrial and mining supplies, later Gummi-Jäger

n 2007 the company is reorganized as Jäger Gummi und Kunststoff GmbH. The divisions automotive technology and environmental technology are spin off as independent companies.

n Jäger Group: 23 locations in 8 countries, incl. 6 production sites:

n Production of Single-and multi- component molded rubber parts

n Production of single-and multi- component profiles

n Focus branches:

n Mechanical Engineering

n Renewable Energy

n Agricultural Engineering

n Automotive

n Envirotech

n Exploration Technology

10 11

Product lines

Facts



Germany Germany

Company ProfileKey Figures of REIFF Technical Products Divison

Turnover ~ 142 Mio EURO

Employees ~ 375 Average stock value ~ 27 Mio EURO

Branches Offenburg, Singen, Chemnitz, Leipzig, Eschborn, Odenthal

Subsidiaries Kremer, Wächtersbach Roller s.á.r.l., Ehlerange, Luxemburg Roller Belgium, Fleurus

Roller-Picha sprl, Herstal, Belgium REIFF Technical Products, Shanghai/ China Roller Maroc SARL, Casablanca

Company AddressREIFF Technische Produkte GmbH

Telephone +49 | 7121 323 0 Telefax +49 | 7121 323 346 Address Tübinger Str. 2-6

D-72762 Reutlingen Germany

Internet www.reiff-tp.de E-Mail [email protected]

Main product segments:

Fluid technology

Molded Parts in rubber and plastics

Hoses

Vibration Control

Gasket technology

Power transmission and conveyer belt service

Company ManagementEDiS Management Representative Hubert Reiff

EDiS Coordinator Alfred Zimmerer

Delegates to the EDiS expert groups Hydraulic Hoses & Fluid Power Markus Walter Industrial Hoses Fredy Burghardt Rubber Sheetings & Moulded Parts Jürgen Millich

n Germany‘s largest technical retailer

n competent partner for initial equipment and equipment supply requirements with a comprehensive product range

n 18,000 square metre warehouse

n over 140,000 standard products, professional processing and the delivery of complete subassemblies

n range of 55,000 products in total in the REIFF Technische Produkte online shop

n cutting edge logistics

n top-notch service

n high quality standards

n optimal merchandise availability, prompt information and worldwide product procurement

12 13

Product lines



Italy Italy

Company ProfileTurnover ~ 30 Mio EURO

Employees ~ 100


Organisation ArroWeld Italia SPA Cenigomma SRL Technology System SRL and more than 140 affiliated companies in Italy

Company AddressCenigomma s.r.l. (member of ARROWELD ITALIA s.p.a. Group)


Address Strada dell‘Alpo 26 I-37136 Verona Italy

Internet www.cenigomma.com E-Mail [email protected]

Hoses and fittings

Rubber and plastic sheeting

Safety material

Gardening and agricultural material

Company ManagementEDiS Management Representative Mirco Gasparotto

EDiS Coordinator Andrea Recchia, Silvano Calgaro

Delegates to the EDiS expert groups Industrial Hoses Giulio Grilenzoni Rubber Sheeting Giulio Grilenzoni PPE Giulio Grilenzoni

14 15

Product lines

Facts



Netherlands Netherlands

Company ProfileIf a specific situation requires a different soluti-on Imbema has the contacts and/or facilities to modify these products. A completely equipped production and assembly workshop, as well as different testing facilities and engineering depart-ment are available for that purpose. In addition to these unique properties, thanks to the longterm experience in high-value industrial and hydraulic hoses, couplings, lubricants and accessories and synthetic materials Imbema is an indispensable partner for every buyer and engineer within the (offshore) industry.

Uptime is up to you. Imbema offers you advice and products in your specific field of interest customized the way you need it to increase your uptime. Imbema is located in the Netherlands, Belgium, Germany and Indonesia.

Turnover ~ 60 Mio EURO (all Imbema compa-nies)

Employees ~ 200 (all Imbema Companies) Average stock value ~ 10 Mio EURO

Company AddressImbema Group

Telephone +31 | 23 517 24 24 Telefax +31 | 23 53 299 15 Address P.O. Box 160

NL- 2000 AD Haarlem Netherlands

Internet www.imbemagroep.com E-Mail [email protected]

Hoses and Couplings

Lubricants

Surface Treatment

Personal Protection Equipment

Anti-corrosion systems

Gas - Water and Energy mete-ring

analysis detection

Building Materials

Road Construction materials

Sports and Leisure materials

Body Construction

Cargo Tracking and Securing systems

Tools

Hydraulics

Pneumatics

Power Drives

Company ManagementEDiS Management Representative Alexander Bloemers

EDiS Coordinator Diana Adriaanse

Delegates to the EDiS expert groups Hydraulic Hoses & Fluid Power Steven Smit Industrial Hoses Erik Toet Metal Hoses Jan Staal Rubber Sheetings Jeroen Dechering Young Executives Alexander Bloemers

Our customers command:

n high quality to reduce downtime

n increasing reliability

n easy maintenance

n high durability

n reducing health, safety and environmental risks

Partners:

n IVG

n Mann tek

n Klaw

n OPW

n Dantec

n Alfagomma

n Lubrication Engineers

n Perma

n Sundström

Markets:

n Gas, water, energy

n Offshore, maritime, process industry

n Building & infrastructure

n Trade & industry

n Mobility

Subsidiaries

Imbema Belgium – Erpe-Mere, Belgium Imbema Cleton – Vlaardingen, Netherlands/ Erpe-Mere, Belgium Imbema SMT – Haarlem, Netherlands / Kornwestheim, Germany Imbema Denso – Haarlem, Netherlands / Erpe-Mere, Belgium Imbema Controls – Haarlem, Netherlands Imbema Rhiwa – Nieuwerkerk a/d Ijssel, Netherlands / Erpe-Mere, Belgium SBS Security & Safety Products – Nieuwerkerk a/d IJssel, Netherlands Safeload International – Nieuwerkerk a/d IJssel, Netherlands Shipment Integrity Solutions – Nieuwerkerk a/d IJssel, Netherlands Unishore – Den Helder, Netherlands Imbema Pacific Indonesia – Surabaya & Jakarta, Indonesia

16 17

Product lines

Facts



Norway Norway

n TESS has solved problems for the industry since 1968

n TESS by far the largest hose supplier in Norway

n Higher sales volume than no. 2, 3 and no. 4 accumulated

n TESS outlets at more than 115 locations in Norway with approved hose workshops + Aberdeen, Esbjerg, Houston, Brazil, Singapore

n TESS makes more than 800.000 deliveries yearly

n WW Hose management service program

n Technical division for hydraulics, welding and subsea

n Strategic management and coor-dination of the industry`s greatest program for service located in Drammen, close to Oslo

n QA-system according to NS-EN ISO 9001-2008

n HSE-system according to NS-EN ISO 14001:2004 and SN-BSOHSAS 18001-2007

n Registered name and trademark

n TESS, member of EDiS, NAHAD, ISA, NOSCA, Subsea Valley and Tradebrooker

n TESS know JIT, e-commerce, Partnering and Integrated supply (Partnershop and Partnerstock)

n Welding distributor and power center no. 1 in Norway

n Training for hose masters and certified hose assembler at TESS Academy

Company ProfileTurnover ~ 338 Mio EURO (all TESS companies)

Employees ~ 1000 (all TESS Companies in Norway

and international)


Branches More than 115 service centers all over Norway Norway, 1 in Aberdeen, 2 in Denmark (Frederikshavn and Esbjerg), 2 in Brazil (Rio/Niteroi and Macaè), 1 in Houston and 1 in Singapore.

Company AddressTESS as


Address P.O. Box 1540 N-3007 Drammen Norway

Internet www.tess.no E-Mail [email protected]

Hoses; fittings and related services

General mechanical and hydraulic assembly

Hydraulic components and systems

Metal Hoses

Hose Reels

Welding equipment and related services

TESS Hose Management system (THM)

Maintenance, repair and operation products (MROP)

PPE and HSE products

Utility stations

Subsea assemblies

Company ManagementEDiS Management Representative Erik Jølberg

EDiS Coordinator Ansgar Karlsen

Young Executives Forum Ken Morten Steen, Tomas Elton Haug

Delegates to the EDiS expert groups Partnershop Roar Kleven, Knut Jolberg Hydraulic Hoses & Fluid Power Lars-Otto Fredriksen, Arild Johansen Industrial Hoses Gunnar Kristensen Metal Hoses Geir Solberg, Stefan Johnsen PPE Kjetil Green

WWW.GNIZTREKLAME.NO

18 19

Product lines

Facts



Poland Poland


Employees ~ 350


Branches Poland, Czech Republic, Kazhakhstan, Russia, Slovakia, Ukraine

Company AddressTubes International Sp. z o.o.

Telephone +48 | 61 653 02 22 Telefax +48 | 61 653 02 20 Address Ul. Bystra 15 A

PL-61 – 366 Poznań Poland

Internet www.tubes-international.com E-Mail [email protected]

Sale of hoses and fittings to the industry

Production of industrial hose solutions

Production of hydraulic hose solutions

Production of reloading hose solutions

Production of fittings according to customer specification

Technical consulting

24H service

Machine and equipment maintenance

Customer trainings

Hoses and compensators

Couplings vales and clamps

High pressure

Special applications including instrumentation, measuring sets,

cleaning & washing

Industrial pneumatics

Machines and accessories

Company ManagementEDiS Management Representative Karol Semba

EDiS Coordinator Paweł Szeszuła

Delegates to the EDiS expert groups Hydraulic Hoses & Fluid Power Marcin Horban Industrial Hoses Paweł Szeszuła, Przemysław Majer Metal Hoses Krzysztof Kazimierczak

Certificates:

n DNV Management Certificate ISO: 9001:2008

n CE marking according 97/23/WE Pressure Equipment Directive

n NATO Commercial and Government Entity

n ISO 3834-2:2007 welding procedures

20 21

Product lines

Facts



Spain Spain

Company ProfileTurnover ~ 24,9 Mio EURO

Employees ~ 87


Branches Barcelona, Tarragona, Madrid, Bilbao/Spain; Lisbon/Portugal

Company AddressComercial Gasso S.A.


Address Polígono Industrial Can Calderón Calle Múrcia, 35 E-08830 Sant Boi de Llobregat/ Barcelona Spain

Internet www.gasso.com E-Mail [email protected]

Hoses & fittings

Production & assembling of Composite Hoses

Production of Loading arms

Production of Folding stairs & Platforms

Production of Breakaways couplings

Turnkey installations

Company ManagementEDiS Management Representative Xavier Gasso & Ignasi Gasso

EDiS Coordinator Jordi Rodriguez

Delegates to the EDiS expert groups Hydraulic Hoses & Fluid Power Guillermo Vicente Industrial Hoses Jordi Rodriguez Metal Hoses Jordi Gasso

n Established in 1862

n Family owned

n More than 10.000 square meters warehouse

n The largest hose supplier in Spain & Portugal

n Own engineering division for Gasso manufactured products

n Production lines of composite hoses, loading arms and fittings

n QA-System according EN ISO 9001:2008

22 23

Product lines

Facts



Sweden Sweden


Employees ~ 105

Average stock value ~ 6,4 Mio EURO

Branches Göteborg, Göteborg/Hisingen, Helsingborg, Malmö, Stockholm, Skellefteå och Luleå

Company AddressLundgrens Sverige AB

Telephone +46 | 31 84 03 90 Telefax +46 | 31 25 77 08 Address Datavägen 27, P.O. Box 9114

S-40093 Gothenburg Sweden

Internet www.lundgrenssverige.se E-Mail [email protected]

Flow Technology

Hoses

Couplings and clamps

Hydraulic

Industrial rubber

Rubber sheeting

Mats

Profile

Adhesives

Sealants

Transmissions

Technical seals

Services

In our punching and cutting workshops, we manufacture

custom made products

Within flow technology we assemble and tests the pressure

and we perform service on hoses

Company ManagementEDiS Management Representative Staffan Johansson

EDiS Coordinator Staffan Johansson

Delegates to the EDiS expert groups Hydraulic Hoses & Fluid Power Peter Good Industrial Hoses Kjell Johansson Metal Hoses Bo Wijkander Rubber Sheeting & Moulded Parts Kjell Johansson

n Sweden‘s largest distributor of hose and industrial products

n The widest range

n 65 years of experience

n With solid expertise and innovation we pursue value-adding technology trading company that develops and improves the customer‘s processes and products

n Since 2007, we are a part of the industrial group Beijer Tech

24 25



President

2019 – 2021 Staffan Johansson c/o Lundgrens, Sweden

Past Presidents

2016 – 2019 Robert Bloemers c/o Imbema Group, Netherlands

2013 – 2015 Karol Semba c/o Tubes International, Poland

2011 – 2012 Erik Jølberg c/o TESS, Norway

2009 – 2010 Hubert Reiff c/o REIFF, Germany

2007 – 2008 Dr.-Ing. Andreas Jäger c/o Jäger Group, Germany

2005 – 2006 Hans Jacobsen c/o Lundgrens Sverige AB, Sweden

2003 – 2004 Xavier Gassó c/o Comercial Gasso S.A., Spain

2001 – 2002 Dr. Wolfgang Blum c/o Haberkorn Group, Austria

1999 – 2000 Flemming Sørensen c/o S&K GROUP A/S, Denmark

1997 – 1998 Erik Jølberg c/o TESS, Norway

1995 – 1996 Ruud J.M. Vogelaar c/o Cleton Meijer, The Netherlands

1991 – 1994 Hubert Reiff c/o REIFF, Germany

Administrator

since 2002 Alberto Boldrin c/o Cenigomma S.R.L., Italy

2000 – 2001 Mirco Gasparotto c/o Cenigomma S.R.L., Italy

1997 – 1999 Ruud J.M. Vogelaar c/o Cleton Meijer, The Netherlands

1991 – 1996 Dr. Gabriele Brighenti c/o Cenigomma S.R.L., Italy

Bank Banca Popolare di Verona Agenzia di Quinzano – 37125 VERONA ABI: 05188; CAB: 11728; CIN: D SWIFT Code: VRBPIT2V162; Account nr.: 21090

Administration Advantages for suppliers

n The official language of EDiS is English

n All quotations to be made in EURO

n EDiS negotiate contracts on behalf of all partners. Orders shall be invoiced directly

n The purchase power of the members are more than 365 millions EURO per year

An EDiS partner should fulfill the following requirements according to EDiS Declaration of Intent § 3:

n From the supplying industry independent trading company

n Leading in his product range and territory

n Very good reputation

n The main product assortment should be in line with the other partners

n Corporate spirit has to be part of the company‘s philosophy

n Warehousing, stocks, customer service, quality guarantee, sales organisation and management should be well-developed

n The activities of the cooperation should be considered confidential and partly secret

n The partner shall not make misuse of confidential information and/or know-how of cooperative subjects

How to become a partner?Nice to know

26 27



Participant Management Representative

Member Industrial Hoses

Member Metal Hoses

Member Hydraulic Hoses

Member Rubber Sheetings

Member PPE

Austria, Haberkorn GmbH Phone: +43 | 5574 695 0 Fax: +43 | 5574 695 99

Dr. Wolfgang Blum Georg Kirschner Gerhard Plasser (Wolfurt) Thomas Samsinger (Vienna)

Denmark, S&K GROUP A/S Phone: +45 | 44 92 10 88 Fax: +45 | 44 92 22 66

Flemming Søeborg Sørensen Flemming Johansen Niels Lorentzen Henrik Christensen

Kasper Høier Nielsen Flemming Johansen

Flemming Johansen

Germany, Jäger Group Phone: +49 | 511 53 580 Fax: +49 | 511 55 33 94

Dr. Andreas Jäger Hans-Ulrich von Tippelskirch

Ann-Christin Beck Ann-Christin Beck Ann-Christin Beck Thomas v. d. Wardt

Germany, Reiff Phone: +49 | 7121 323 0 Fax: +49 | 7121 323 346

Hubert Reiff Fredy Burghardt David Denys

Markus Walter David Denys

Jürgen Millich

Italy, Cenigomma s.r.l. Phone: +39 | 045 82 83 711 Fax: +39 | 045 82 00 799

Mirco Gasparotto Andrea Recchia, Silvano Calgaro Giulio Grilenzoni Giulio Grilenzoni

Netherlands, Imbema Group Phone: +31 | 10 434 5922 Fax: +31 | 10 460 1904

Ron C. van Loon Erik Toet Jan Staal Steven Smit Jeroen Dechering Jean-Paul Suis

Norway, TESS as Phone: +47 | 32 84 40 00 Fax: +47 | 32 84 40 01

Erik Jølberg Gunnar Kristensen Geir Solberg Stefan Johnsen

Lars-Otto Fredriksen Arild Johansen

Kjetil Green

Poland, Tubes International Sp. z o.o. Phone: +48 | 61 653 02 38 Fax: +48 | 61 653 02 22

Karol Semba Paweł Szeszuła Przemysław Majer

Krzysztof Kazimierczak Marcin Horba´n

Spain, Comercial Gasso S.A. Phone: +34 | 93 65 29 800 Fax: +34 | 93 65 29 804

Xavier Gassó Ignasi Gassó

Jordi Rodriguez Jordi Gasso Guillermo Vicente Jordi Gasso

Sweden, Lundgrens Sverige AB Phone: +46 | 31 84 03 90 Fax: +46 | 31 25 77 08

Kjell Johansson Kjell Johansson Bo Wijkander Peter Good Kjell Johansson

Who‘s who in EDiS?

28 29



Haberkorn GmbH A-6961 Wolfurt

S&K GROUP A/S DK-2730 Herlev

Jäger Group D-30625 Hannover

REIFF Technische Produkte GmbH D-72762 Reutlingen

Cenigomma s.r.l. I-37136 Verona

Imbema Group NL-3130 AB Vlaardingen

Tess as N-3007 Drammen

Tubes International Sp. z o.o. PL-61 – 366 Poznań

Comercial Gasso S.A. E-08830 Barcelona

Lundgrens Sverige AB S-40093 Gothenburg

Edition August 2019

EDiS-GroupPresident: Staffan Johansson

CENI gomma

Industrial Hoses

Rubber Sheeting

PPE

Italy

Gasso

Industrial Hoses

Metal Hoses

Hydraulic Hoses

Spain

Haberkorn

Industrial Hoses

Hydraulic Hoses

Rubber Sheeting

Austria

Imbema Group

Industrial Hoses

Metal Hoses

Hydraulic Hoses

Holland

Young Executives

Group

Jäger

Industrial Hoses

Hydraulic Hoses

Rubber Sheeting

PPE

Germany North

Lundgrens

Industrial Hoses

Metal Hoses

Hydraulic Hoses

Rubber Sheeting

Sweden

SKG

Industrial Hoses

Metal Hoses

Hydraulic Hoses

Rubber Sheeting

PPE

Denmark

Young Executives

Group

REIFF TP

Industrial Hoses

Hydraulic Hoses

Rubber Sheeting

PPE

Germany South

Young Executives

Group

TESS

Industrial Hoses

Metal Hoses

Hydraulic Hoses

PPE

Norway

Young Executives

Group

Tubes Internation.

Industrial Hoses

Metal Hoses

Hydraulic Hoses

Poland

Young Executives

Group


www.edis.eu

The EDiS Idea


Documents

The EDiS Idea