Embed Size (px)
Citation preview
European Exhaust & Catalyst
....the driving force behind vehicle emissions
www.eurocats.co.uk
EEC was founded in 1997 by John Clark after vehicle manufacturers began installing catalytic converters as standard in the early 1990s. John was already a well established
ensured
Since this time EEC has grown to become one of the largest manufacturers of Type approved and Standard catalysts for the UK and European automotive aftermarket and caters for the needs of a nationwide customer base as well as customers in Europe and beyond. EEC
and complies with all European type approval legislation. To meet our customer needs, EEC has expanded it’s portfolio of products which include both cordierite and
high performance sports catalysts, a comprehensive range
EEC have invested in obtaining the highest level of Type
we deliver the best possible product but also adhere to the best possible environmental practices.
Supporting our customer needsEEC recognises that its trading success depends on being able to supply a wide range of high quality catalytic converters and associated products through a well supported network of independent distributors and motor factors. Our Business Development Managers can help you grow your catalytic converter Business by providing
Who are we?
manufactures and stocks over 5,000 direct �t catalysts
the success of EEC.�gure in the Automotive Exhaust Industry and his experience and wealth of knowledge
Approval certi�cation so you can trust that not only will
of direct �t Lambda Sensors, pre-cat Front pipes, �exiblecouplings, pipe connectors, Exhausts, brake pads and discs, �tting kits and the industry unique EEC DPF reset tool.
Silicon Carbide Diesel Particulate �lters, universal and
speci�c statistics to help you plan. sta� training to increase con�dence and knowledge, stock Management guidance, plus useful industry and company
Emissions Training Programme includes:
•
Highly experienced Technical trainer
•
The importance of the exhaust system
•
How a catalytic converter works
•
• All about DPFs
•
•
Demonstrations of the EEC DPF
regeneration toolFault �nding using a 4 gas analyser
Fault �nding and regenerating a DPF
European Exhaust & Catalyst Ltd www.eurocats.co.uk
Located near Portsmouth, England – Denmead is the
distribution base for European Exhaust and Catalyst Group of companies. Our dedicated teams for UK sales, Technical and Export are based here – along with Administration, Finance and Purchasing.
Centrally located near Derby, England, the Hilton site was acquired in 2005 to meet our expansion needs and allows us to extend our manufacturing and distribution capabilities. In addition, all inbound materials are received here allowing the other facilities to draw down stock to suit their requirements. Hilton is the sole distribution outlet for our exhaust and brake pad products. Our manufacturing sites maintain ISO 9001:2008
quality product in order to protect the customer from defect. Our philosophy on continuous improvement throughout the
Revcoat Technologies www.revcoat.co.uk
Situated in Waterlooville, England - Revcoat is positioned to provide catalyst solutions to a wide variety of markets on a
capabilities span from small catalysts used for appliance applications and small stationary combustion engines to automotive catalyst and large industrial units used for large volume exhaust treatment. As one of the only coating plants in the UK, Revcoat allows EEC to go that one step further to providing the very latest products, including a wide range of
Clean Air Technology www.cleanairtech.co.uk
With constant pressure to recycle and with the escalating price of precious metals EEC established Clean Air Technology (CAT) based near Portsmouth. This enabled us to complete our ‘cradle to grave’ manufacturing process. CAT is designed to reclaim old core catalysts to reuse the precious metal and other components that still remain within the catalyst. By implementing this process and
both our customers and addresses the issues raised about the Automotive industry and the environment. Operating out of the Revcoat site CAT will organise regular collections from any site nationwide and will pay cash for the old core received. Just another string to EEC’s bow.
Prolazer Components www.plcomponents.com
Based in Stone, England – Prolazer Components is our dedicated precision engineering facility servicing internal and external customers with high precision, cost e�ective solutions to satisfy individual requirement. Operating from over 18,000ft 2 Prolazer Components boasts an impressive array of state the art machinery to complement our laser cutting and CNC machining capabilities enabling us to service sectors including Automotive, Construction, Agricultural & Yellow Goods and Medical as well as providing solutions for individual bespoke commissions. With the ability to undertake projects
from concept to completion, our highly skilled engineering team has the capability to meet the needs of the most discerning customer.
Easiparts www.easiparts.co.uk
Operating from Glasgow, Scotland - Easiparts o�ers distribution to the whole of our Scottish market, holding a full range of EEC catalysts and over 4000 exhaust references in its 12,000 sq ft unit. With this level of stock and
a delivery schedule of up to 6 times a day, customers can
EEC Group of companiesThe EEC Group of Companies operate from over 100,000 sq.ft. throughout the United Kingdom and employ over 100 highly-skilled and hard-working sta�.
Head O�ce and main manufacturing, development and
o�ering a free collection service nationwide CAT bene�ts
con�dently secure business when buying from Easiparts.
Diesel Particulate �lters.
wordwide basis. Certi�ed with ISO 9001: 2008, our coating
certi�cation ensuring conformity of production resulting in
business intensi�es our focus on progression.
con�dently secure business when buying from Easiparts.
At EEC we take enormous pride in our work and fully understand the importance of close attention todetail in all areas of the business.
Our team is our most valuable resource and the main reason for our success. To give you an insight into how we operate and who to contact should you have an Enquiry, please browse the following members of our management team.
Latest product information visit www.eurocats.co.uk
Director of Operations
Managing Director
Paul [email protected]
Financial Controller
Andy [email protected]
Director of Sales
Duncan [email protected]
Director
The EECManagement Team
We currently export to:
• Eire• France• Germany• Holland• Italy• Spain• Denmark• Sweden• Finland• Hungary• Slovenia• Romania• Cyprus
• Greece• Turkey• UAE• India• Australia• Poland• Portugal• Croatia• South Africa• Slovakia• Latvia• Jersey• Guernsey
EEC has been exporting to Europe and beyond for over 14 years through our network of distributors and is actively looking to expand further.
In addition to Type Approved catalytic converters, we can o�er universal converters, front pipes, lambda sensors and brake pads – visit www.eurocats.co.uk for more detailed product information.
We use reliable, well established shipping companies to ensure your deliveries arrive safely and on time.
Please contact our dedicated Export Team on +44 (0) 239 224 5307or send an email to [email protected] so we can fully appraise your requirements and tailor a package that suits your needs.
Trade - Exportughugh
• Standard Catalytic Converters• Type Approved Catalytic Converters
• SCR catalysts• Cordierite Diesel Particulate Filters
• Silicon Carbide (SIC) Diesel Particulate Filters
• Pre cat Front Pipes• Lambda sensors
• Flexible Couplings• Brake Pads
• Brake Discs
• Pipe Connectors• DPF Diagnostic tool
• Exhausts• Comprehensive Catalyst Fitting kits
EEC Product RangeAt EEC we manufacture over 8000 parts for 62 vehicle manufacturers, creating over 40,000 di�erent
To complement our range of catalytic converters we manufacture an increasing range of stainless steel front
applications across our products ranges. EEC manufactures all of our Standard and Type ApprovedCatalytic Converters and Diesel Particulate Filters in the UK.
pipes, flexible couplings, pipe connectors and a comprehensive range of ‘Click Fit’ lambda sensors.
Our Promise to youNext day service available in the UK, 2 to 3 days in Europe2 year warranty on all catalytic converter, DPF* and exhaust products Dedicated sales and technical teams for UK and Export customers
at the right timeA friendly, dedicated Business Development Manager to take careof stock profiles, marketing and part movement analysis, for you Flexible payment termsMarketing support through marketing funds, trade shows, workouts, flyers and marketing POS materials. Loyal supply to you and not your customer baseRegular reviews of part movement to make sure you’re aware of what sells
Regular stock re-profiling to ensure the right stock on your shelf
*warranty does not cover blocked filters
••••
•
••
••
Using our 40 years of experience in the exhaust and catalytic converter business EEC have sourced from and made strategicalliances with a number of continental exhaust manufacturers.
To further enhance our technical and forward thinking service to our customer base we can now offer the, industry unique,DPF reset tool. This tool allows the garage workshop to carry out service and maintenance tasks on the majority of DPF vehicles.
Using close business relationships across the globe EEC also offer an expanding range of quality Brake Pads and Discs, sourced from the leading manufacturers in that market.
EEC Manufacturing CapabilityLaser Cutting
A brace of Trumph CNC Laser cutting machines enable the precise cutting of materials up to 20mm in thickness to a tolerance of +/- 0.10mm. A team of skilled draughtsmen have the capability to design and engineer components for almost any application, as well as translate customer drawings to provide exceptional solutions quickly.
CNC Turning
CNC machines from XYZ and Mori Seiki enable our highly skilled technicians to produce a diverse range of products to exacting tolerances. Optimised cycle times enable us to considerably shorten lead times and dramatically
CNC Machining Centre
A bank of numerically controlled milling machines accompany our XYZ Mini Mill CNC machining centre, allowing us to machine an amazing range of complex,
meticulously to maintain high standards of quality, productivity and cost e�ectiveness.
Tube Manipulation
Our equipment list consists of 6 CNC benders from Addison, Herber and YLM. Incorporating both empty and mandrel capability as tight as 1D; where constant diameters can be guaranteed throughout the manipulated tube. A substantial array of ancillary machines ensures the
Metal Tube Spinning
The Miic metal spinning machine is used to produce a
cost e�ectively.
Welding Capability
Technically skilled manual welders accompany Automated robot systems from Comau and semi automated weld
of product. Our manual welders are periodically tested to ensure weld integrity and skill base is satisfactorily high.
Call our sales team now: +44 (0)23 9224 5300 Export : +44 (0)23 9224 5307
high quality products. Quali�ed machinists work
variety of pro�les to suit individual applications quickly and
Lathe systems to provide �rst class quality and functionality
repeatability of any customer end �nish speci�cation.
increase �exibility in order to delight the customer.
Quick & Easy Ordering Methods:By Phone, fax or email or view our full range on TecDoc or visit www.eurocats.co.uk
UK SalesTel: 023 9224 5300
Fax: 023 9224 5310
Email: [email protected]
Export SalesTel: +44 (0)23 9224 5307
Fax: +44 (0)23 9224 5310
Email: [email protected]
Visit our website for:
• Detailed product information• Search over 40,000 applications by part or X-Ref •
• New applications added every 2 weeks•
Quality CAD drawings of every product
All the information you need is online 24/7 at:
Technical speci�cations, such as product dimensions
www.eurocats.co.uk
Technical Support Tel: +44 (0)23 9224 5424
eurocats eec_cat eurocats
....the driving force behind vehicle emissions
European Exhaust & Catalyst
Catalyseurs, échappements, pipes emissions, plaquettes de frein, sondes lambda, kits de montage
Catalizzatori, silenziatori, tubi anteriori, pastiglie freno, sensori di lambda, corredi adatti
Catalizadores, silenciadores, pipas delanteras, pastillas de freno,sensores de la lambda, kits apropiados
Katalysatoren, auspu�, �am rohren, bremsbeläge, lambda sondes,installationssätze
Catalisadores, escapes, tubos colector, pastilhas, sensor oxegeneo,kit montage
Katalysators, uitlaten, voorpijpen, remblokken, lambda sondes, montage kits
European Exhaust & Catalyst LtdUnits 2 & 3 Parklands Industrial Estate, Forest Road, Denmead, Hampshire PO7 6TJ United Kingdom
Email: [email protected]
