Product NewsTHE DRAG SPECIALTIES FEBRUARY 2019

1 +49 (0) 6501 96 95 -2000 • partseurope.eu

PRO PIPE 2-INTO-1 EXHAUST SYSTEMS• Includes tuned length stepped headers

with a highly efficient merge collector that feeds into the stepped 41/2” megaphone design

• Complete with header and collector heat shields, as well as a shield over the first step of the megaphone muffler body

• CNC-machined chrome-plated billet end cap

• Flat plane mounting panel for 12 mm O2 sensors; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM

• Available in chrome or matte black finishNOTE: Not for Softail models with

Heritage-style saddlebags.

PART # DESCRIPTIONFOR 18-19 FLFB/ FXBR MODELS1800-2384 Black1800-2383 Chrome

SLASH-CUT MUFFLERS• Classic slash-cut styling• Boosts horsepower and torque• Removable dB reducer• SAE J2825 Sound Level Compliant• Sold in pairs

PART # DESCRIPTIONFOR 18-19 FXBB, FXLR, FXBR, FLFB, FLSL MODELS1801-13511 Black ceramic1801-13542 Black ceramic1801-13521 Chrome1801-13552 ChromeFOR 18-19 FLHC, FLDE MODELS1801-13531 Chrome1801-13562 Chrome1 With catalytic converters.2 Race only.

1801-1354

1801-1356

1800-2384

1800-2383

2 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

FEBRUARY 2019

WHOLE HOG 900 WATT AMP/ SPEAKER KIT • Complete 900 watt/6 speaker kit• Designed to work with factory

charging system – no upgrade required

• Includes fairing speakers, rear speakers, and 6,5” speakers with adapters for the fairing lower glove boxes

• Speaker adapters for fairing lower glove boxes give simple access to factory coolant tank

• Main portion of lower speaker adapter is gloss black to match factory inner fairing

• Includes Wild Boar Audio amp with special mounting plate (see note)

• All amps fit inside fairing, are bolt-in and 100% plug-and-play

• Amplifiers feature R.E.M.I.T Technology for excellent FM reception from a Class D amp

• Kit comes complete with all wiring and hardware to complete the installation

Note: A radio reflash may be required for best performance.

Note: Requires removal of CB module, if equipped.

PART # DESCRIPTION4405-0534 For 14-19 FLHTK/ FLHTCUTG models

LOWER SPEAKER AMP KIT • Features a plug-and-play, 300-watt

2-channel amplifier• Wild Boar Audio 6,5” 4-ohm speakers• R.E.M.I.T. technology for excellent FM

reception from a Class D amp• Includes side plate to mount amp

inside fairing• Includes adapters to properly mount

speakers in lowers• Easily added to bikes with Wild Boar Ultra

Kit (PART #4405-0499) already installedNOTE: A radio reflash may be required.NOTE: Requires removal of CB module

on FLH models (if equipped).

PART # DESCRIPTION4405-0533 For 14-19 FLHTK models

HOGTUNESHogtunes audio products are designed first and foremost for motorcyclists! All of their products are designed to deliver the ultimate listening experience when on the bike. From a long-distance cruise to cranking out the tunes at a local bike night, Hogtunes products has the audio setup that is right for you and your bike. And every product is manufactured to the highest quality standards so it will perform for years down the road.

3 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

FEBRUARY 2019

PERFORMANCE SERIES 200W AUDIO KITS• Kit includes 200W amplifier and two

7,5” waterproof fairing speakers• Speakers feature 140W max power, 100W RMS and

2-ohm impedance• Amplifier is a 2-channel at 100W each, 200W total • Amp mounts into custom bracket system with slots to relocate

two feature modules such as CB, MP3, or satellite radio• Amp measures 61/2” x 43/4” x 13/4”

PERFORMANCE SERIES 200W AMP KIT• Full-range class D amplifier• Fully shielded from AM and FM radio interference• 2 channels at 100W RMS per channel (200W total)• Plug-n-play wiring harness• Amplifier measures 61/2” X 43/4” x 13/4”

PART # DESCRIPTION4405-0525 For 06-13 FLHX/ FLHT

PART # DESCRIPTION4405-0526 For 06-13 FLTR

PART # DESCRIPTION4405-0524 For 98-13 FLHT/ FLHX/ FLTR

4405-0526

4405-0525

4405-0525

4 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

FEBRUARY 2019

EXFIL-48 BACKPACK• Designed by riders, for riders and packed with

moto-centric features• Bottom outside pouch folds out to reveal

two rugged zipper compartments and wrench pockets

• Vertical compression straps keep things from bouncing around, secure the bag to luggage racks and can be used to add a bedroll or jacket to the outside of the bag

• Two large internal pockets that can be rolled up when not in use to increase interior volume

• Main interior compartment has a padded laptop sleeve with elastic retainers

• Top outer pouch has a fleece-lined pocket for delicate objects like glasses or a phone

• Center compression straps cinch to reduce bulk and shifting while riding

• Holds up to 48 355ml (12 US fluid ounce) cans

• Features ventilated mesh material over molded Bio-Foam inserts to allow for airflow

• Bottom portion of the bag is PVC-coated for water-resistance and easier clean up

• Constructed from 1600-denier/ PVC outer shell with high-viz orange interior lining

• Dimensions: 29 cm W x 25,5 cm D x 45,5 cm T (111/2” x 10” x 18”)

LUGGAGE RACK FOR COBRA SISSY BARS• Bolt-on a strong and good looking luggage rack to

an existing Cobra sissy bar• Rack platform is made from sturdy steel and

designed to bolt-on in minutes• Available in chrome or black powder-coat finish

DETACHABLE SQUARE BACKREST KITS• A detachable backrest offers the best of both

worlds for your passenger• The convenience of a comfortable back

support for your passenger, with the ability to quickly remove

• Each is bike-specific and arrives with mounting hardware, bar, and pad

• Does NOT require the relocation of turn signals

• Optional luggage rack bolts directly to backrest see the 2019 Parts Europe FatBook catalog

• Available in chrome and black

PART # DESCRIPTIONFOR 18-19 FLFB/ FLFBS/ FXBR/ FXBRS MODELS1510-0415 Chrome1510-0416 Black

PART # DESCRIPTIONFOR 18-19 FLSB1501-0621 35,5 cm (14”) Chrome1501-0622 35,5 cm (14”) Black

1501-0621

1501-0622

1510-0415

1510-0416

PART # DESCRIPTION3517-0450 Exfil-48 backpack

5 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

FEBRUARY 2019

AIRHAWK BIGSEAT™ BACKREST SOLO SEAT• This is the next generation of the renowned Danny Gray Big Seat• Seat has two inflatable air cells in the driver’s portion• The Airhawk’s Comfort Seating System is now integrated into the seat• The results are the custom design and production capabilities of Danny Gray

with Airhawk’s clinician-approved Dry Floatation® technology• Airhawk’s patented system eliminates painful pressure points and is fully

customizable to each rider’s contour• Now, riders can enjoy the same benefits they’ve always known of Airhawk but

have them built into a revolutionary seat• With this patent-pending design, riders can also appreciate continuous

airflow through the seat, reducing heat build-up and keeping them cool and dry; no hot seat

• An integrated pump and relief valve make it possible to adjust the air pressure while seated

• Optional pillion pad and backrests (sold separately, see 2019 Parts Europe FatBook) provide additional comfort for any length ride

• Small backrests measure 23 cm W x 12,5 cm T (9” x 5”); large backrests measure 25,5 cm W x 20,5 cm T (10” x 8”)

SPEEDCRADLE™ SOLO SEAT• Designed for added stability and control in high-speed situations, heavy

crosswinds and turbulent environments• Seat pushes you down and forward approximately 51 mm (2”)• Pronounced rise at the seat tip helps to lock rider in saddle to mitigate torso

torque and loss of control

STEP-UP LS SEATS• Saddlemen has collaborated with top freestyle performers to create the new

T-sport inspired step-up lattice stitch (LS) seats• Infuse old-school lattice stitch retro styling with a modern twist• High lumbar keeps the rider locked into the seat• Feature Saddlemen’s Ultra-Foam which is formulated to provide a perfect

balance of rigidity and user compliance with integrated GelCore™ technology• Black or brown whisper-grain SaddleHyde™ covers• Installs easily with all necessary mounting hardware and instructions included

WIDE TRIPPER™ SOLO FRONT AND REAR SEATS• Seat design lets you ride low and still be comfortable• Cut narrow at nose for better ground reach• Detailed stitch work in the highly durable black, synthetic glove leather cover• Fully adjustable driver backrest is easily removable without tools• Marine-grade fiberglass baseplate

PART # DESCRIPTIONFOR 08-19 FLHT/ FLHR/ FLHX/ FLTR0801-1150 Double diamond stitch w/ charcoal gray thread

PART # DESCRIPTIONFOR 08-19 FLHT/ FLHR/ FLTR/ FLHX0801-1149 Double diamond stitch

PART # DESCRIPTIONFOR 04-05 FXD (EXCEPT FXDWG)0803-0607 Black0803-0608 Brown

PART # DESCRIPTIONFOR 18-19 FLDE/ FLHC0802-1078 Front w/ driver backrest; 32 cm (12,5”) W0802-1101 Rear; 25,5 cm (10”) W

0802-1078

0803-0607

0803-0608

0802-1101

6 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

FEBRUARY 2019

PREDATOR SEATS• Select seats have Solar-reflective leather in the seating area and automotive-

grade vinyl on the sides; patented process reduces surface temperature by as much as 14 °C (25 °F) for a cooler seat, higher durability and longer life over conventional leather or vinyl

• Custom-molded polyurethane foam for maximum comfort and styling• 5 mm (3/16”) ABS thermoformed seat base for a perfect fit• Rubber bumpers and fully carpeted bottom to protect paint• Fit with all Drag and most H-D sissy bars• Include all mounting hardware

SOLENOID END COVER/ STARTER BUTTONS• Constructed from aluminum with a chrome finish• Replaces the solenoid end cover and

includes mounting screws• Fits most 91-17 OEM and aftermarket

starter motors

38 MM (11/2”) “BIG” BUFFALO BARS• Handlebars for the “biggest fattest” look• Feature a full 38 mm (11/2”) diameter in the

clamping area (except T-Bars)• Custom bends for the ultimate in comfort• Slotted and notched for Throttle-By-

Wire applications• Designed for use with 96 and newer style

controls and master cylinders• Optional gauge mounts are available

separately for T-Bars; see the 2019 Parts Europe FatBook

NOTE: Accept heated grips and hydraulic clutch.

FENDER SKINS• Feature leather perimeters with a finished edge• Felt liner to protect paint• Include black zinc washer and screw to complete installation• Hugs fender perfectly• Designed to match Drag Specialties solo seats• Will work with most OEM and accessory solo seats

PART # DESCRIPTIONFOR 18-19 FXFB (72 CM L OVERALL X 30,5 CM W FRONT X 15 CM W REAR) (281/4” X 12” X 6”) 0802-11301 Smooth0802-11312 Smooth1 Automotive-grade vinyl.2 Solar-reflective leather.

PART # DESCRIPTION

2110-0978For 1,0, 2,0, 2,4 and 2,6kW starters

2110-0979 For 1,2 and 1,4kW starters2110-0980 For 1,6 and 1,8kW starters

CHROME DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACKFOR 96-19 MODELS (EXCEPT BELOW)0601-4325 30,5 cm (12”) Zero T-Bar 30,5 cm (12”) 63,5 cm (25”) 21,5 cm (8,5”) 0 cm (0”)0601-4326 35,5 cm (14”) Zero T-Bar 35,5 cm (14”) 63,5 cm (25”) 21,5 cm (8,5”) 0 cm (0”)FOR 15-19 FLTRX/ FLTRU0601-4324 25,5 cm (10”) T-Bar 25,5 cm (10”) 79 cm (31”) 21,5 cm (8,5”) 20,5 cm (8”)

PART # DESCRIPTIONFOR 18-19 SOFTAILS (35,5 CM L X 16,5 CM W) (14” X 61/4”)1405-0279 W/ smooth automotive-grade vinyl center1405-0280 W/ embossed faux gator leather center1405-0281 W/ flame stitch automotive-grade vinyl center

0601-4324

0601-4325

0802-1131

1405-0280

1405-0281

1405-0279

2110-0980

7 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

FEBRUARY 2019

V80 LONG-BLOCK ENGINE• Stock-height basic engine is a direct

bolt-in replacement for aging 80” H-D Big Twin Evolution engines

• Compatible with EFI• Does not include carb or ignition; use

stock or aftermarket carburetor and air cleaner

• 508 cam• Forged rocker arms

• 585 valve springs• 8,4:1 flat top cast pistons• S&S standard oil pump• S&S performance

replacement heads• 31/2” x 41/4” bore and stroke• Wrinkle black finish

CLARITY CAM COVERS• Allows for viewing of the internal moving engine components• CNC-machined from billet aluminum• Hardware included• Available with chrome, Contrast Cut™ and Black Ops™ finishes The RSD Clarity Cam Covers contain two pre-installed Lexan® polycarbonate

windows. These windows are very resistant to almost everything a motorcycle will be exposed to. However, extra care and preparation must be taken when

installing the cam cover near the exhaust system. The Lexan® polycarbonate windows must be at least 5/16” away from the exhaust pipe to insure the temperature does not exceed the capabilities of the Lexan®. Additional clearance is recommended to preserve the optical clarity of the Lexan® window as well as reducing the amount of heat introduced to the engine from the exhaust. Take measurements when installing the exhaust system and make sure that the exhaust NEVER contacts the Lexan® windows, bolts or the aluminum cam cover. Lexan® is very durable but it must be treated just like any plastic and cannot come into contact with the exhaust pipes. The Lexan® windows, just like any plastic, will melt if in direct contact with the exhaust pipe. If the Lexan® windows have less than adequate clearance premature discoloration, cracking or melting may occur causing severe failure and/or possible injury to the rider. RSD recommends the use of “high pipes” or exhaust that runs above the cam cover, which eliminates any potential exhaust contact.

TECHNICAL GUIDELINES FOR CLARITY CAM COVER:1. There must be at least 5/16” between the exhaust and

the Lexan® windows, bolts and cover.2. Absolutely no contact between the Lexan® windows,

bolts or aluminum cam cover. 3. Do not use brake cleaner, acetone or any harsh chemicals during installation.4. Use Plexus cleaner for cleaning. If any other cleaners are used,

read the label to verify compatibility with Lexan®.

V111 COMPLETE ENGINE• Complete engine includes ignition and Super E carburetor with teardrop air cleaner• Short stroke produces less vibration and longer engine life• Includes piston cooling jets and large cooling fins to increase cooling efficiency• HVHP (High Volume High Pressure) oil pump• 9,8:1 compression ratio• S&S 585 cam and lightweight single coil valve springs minimize valve train noise• S&S forged rocker arms• S&S Super Stock™ ignition system• Shorter than stock height engine makes installation easy• Natural finish engine includes chrome-plated rocker covers, air cleaner cover, oil

pump, gear cover, tappet blocks and pushrod tubes• Gloss black finish engine includes gloss black rocker covers, air cleaner cover, oil

pump, gear cover, tappet blocks and pushrod tubes

PART # DESCRIPTION

0901-0230 For 70-99 custom Big Twin chassis, with alternator-style primary

PART # DESCRIPTIONFOR 17-19 M-EIGHT MODELS0940-1729 Contrast Cut0940-1730 Chrome0940-1731 Black Ops

PART # DESCRIPTIONFOR 84-99 EVOLUTION BIG TWIN CHASSIS W/ CARBURETED ENGINE0901-0228 Natural finish0901-0229 Gloss black finish

0901-0228

0901-0229

CLARITY HYDRAULIC CLUTCH ACTUATORS• CNC-machined from

billet aluminum• Available in Black Ops™, Contrast

Cut™ and chrome finishes• Requires a master cylinder with

an 11/16” bore and requires custom hydraulic line (not included)

PART # DESCRIPTIONFOR 17-19 FLHT/ FLHR/ FLHX/ FLTRX MODELS1105-0230 Contrast Cut1105-0231 Chrome1105-0232 Black Ops

1105-0230

1105-0231

1105-0232

0940-17310940-1729 0940-1730

8 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

FEBRUARY 2019

TRACKER™ SERIES PISTON KITS• Forged piston crown with generous valve

pockets for big valves and cams• Precision-fit rings selected for each

application for ultimate sealing• Force-fed pin oiling provides

enhanced lubrication of the piston pin• Pressure seal groove reduces

ring lifting and power loss• ArmorGlide® skirt coating

reduces friction, providing quieter operation and improving scuff resistance

• Valued-packaged with two pistons, rings, piston pins and circlips

FINNED STARTER END ACCENTS• Cast-aluminum

construction, chrome or satin black and machined finishes

• Hassle-free tool-less installation using high-temp, automotive-grade 3M® VHB™ adhesive tape

• Styled to match the complete line of Kuryakyn Finned accessories

FINNED STARTER COVERS• Direct bolt-on replacement for the plain stock

Twin Cam starter end cover with classic finned styling• Cast from quality A380 aluminum• Available in chrome or satin black

and machined finishes• Looks great with Finned Transmission Cover Accents

and Finned Timing Covers, both sold separately

PART # DESCRIPTIONFOR 12-17 TWIN CAM 103 AND 07-13 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) VM-RING PACKAGE (10,5:1 COMP.)0903-15651 Std.0903-15661 0,010” 0903-15671 0,020” FOR 99-06 TWIN CAM 88 BORED TO 95 CU. IN. VM-RING PACKAGE (9,5:1 COMP.)0903-15581 Std.0903-15591 0,010”0903-15601 0,020”FOR 99-06 TWIN CAM 88 BORED TO 95 CU. IN. VM-RING PACKAGE (10,5:1 COMP.)0903-15611 Std.0903-15621 0,010”0903-15631 0,020”FOR 99-06 TWIN CAM 88/95 BORED TO 97 CU. IN. VM-RING PACKAGE (10,5:1 COMP.)0903-15641 Std.FOR 84-99 EVOLUTION 1340CC 80 CU. IN (FLAT TOP) X-RING PACKAGE (8,5:1 COMPRESSION/9,5:1 COMPRESSION W/ SCREAMIN’ EAGLE HEADS)0903-1576 Std.0903-1577 0,010”0903-1578 0,020”0903-1579 0,030”

PART # DESCRIPTIONFOR 84-99 EVOLUTION 1340CC 80 CU. IN (DOMED TOP) X-RING PACKAGE (10:1 COMPRESSION)0903-1580 Std.0903-1581 0,010”0903-1582 0,020”0903-1583 0,030”FOR 86-19 883 XL BORED TO 1200CC (REVERSE DOME) (9,5:1 COMP.) X-RING PACKAGE0903-15682 Std.0903-15692 0,010”0903-15702 0,020”0903-15712 0,030”FOR 86-19 883 XL BORED TO 1200CC (REVERSE DOME) (10:1 COMP.) X-RING PACKAGE0903-15722 Std. 0903-15732 0,010” 0903-15742 0,020” 0903-15752 0,030” 1 Requires Screamin’ Eagle module on fuel-injected models. 2 08-19 models will require the use of 1200cc cylinders.

PART # DESCRIPTIONFOR 17-19 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU AND H-D FL TRIKES2110-0947 Chrome2110-0948 Satin black and machined

PART # DESCRIPTIONFOR ALL 99-17 TWIN CAM MODELS2110-0949 Chrome2110-0950 Satin black and machined

2110-0948

2110-0947

2110-0950

2110-0949

9 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

FEBRUARY 2019

12-POINT CASE BOLT KIT• Quality 12-point hardened stainless steel bolts with a “SHOW”

corrosion-resistant finish• Feature precision-rolled threads for optimum engagement, to prevent galling

and promote more consistent torque loading• Wide underhead flange design provides even load distribution for optimum

sealing of surfaces – preventing leaks• Top engine builders demand quality fasteners! Secure your engine

with complete confidence• Eliminates thread problems associated with chromed hardware• Tensile strength rated @ 170.000 psi; superior and stronger than OEM and

stronger than grade 8 fasteners• Manufactured by ARP® to Feuling’s® exact specifications• Includes 14 case bolts and moly assembly lubricant for installation

51 MM (2”) FORK-MOUNTED LED DRIVING LIGHTS• Super-bright 3000 lumen output per light• Pure white light rated at 6000 Kelvin• Waterproof black light housings• Lights turn with steering for added visibility• Sold in pairs• Mounting hardware included

STATIC SEQUENTIAL SIGNAL MODULES• Allows three separate LED

lights installed on the rear of the bike to flash sequentially

• LEDs will also perform brake and running light functions

• Includes color-coded replacement rear fender harness and installation instructions

• Built-in load-equalizer prevents rapid flashing

• Static sequential flashing: When the turn signal button is pressed, the first LED will light up followed by the second and third before all three shut off and the sequence starts again

PART # DESCRIPTION2401-1055 For 18-19 Softail

PART # DESCRIPTION2001-1820 For 99-13 FLHT/ FLHX/ FLHR/ FLTRX/ FLTRU/ FLHXXX2001-1821 For 14-19 FLHT/ FLHX/ FLHR/ FLTRX/ FLTRU/ FLRT

PART # DESCRIPTIONSTATIC MODULES

2050-0304 For 97-13 HD models, 99-03 XL (except FXCW, 10-13 FLHX, FLTR)

2050-0305 For 10-13 FLHX/ FLTR Street and Road Glide models only2050-0306 For 09-13 FLH/ FLTRSE

STAR SERIES HANDGUARD LED TURN SIGNAL KIT • Super bright LED lights• White running light, amber turn signal• Works with OEM turn signals• Four wire installation• Use optional plug-n-play wire harnesses in place of stock turn signals• Requires Star Series handguards and mount kit (sold separately);

see the 2019 Parts Europe FatBook

PART # DESCRIPTIONFOR STAR SERIES HANDGUARDS 2020-1701 LED turn signal kit2040-2286 Plug-n-play wire harness for 14-19 FLHX/ FLTRX

2040-2287 Plug-n-play wire harness for 04-13 FLTR, 07-17 FXD (except FXDL/S)

Shown installed on handguard

2001-1821

2001-1820

2020-1701

2050-0304

10 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

FEBRUARY 2019

PROFILE 21” FRONT FENDER • Medium-length curvaceous design wraps tire perfectly• Stamped from one-piece 14-gauge steel• Direct bolt-on black anodized spacers included

LOW PROFILE REAR AXLE/ ADJUSTER KITS• Kit contains rear axle,

axle adjusters and safety E-clip

• Constructed of 304 stainless steel with machine finish

• 25 mm axle diameter• Easy to adjust with

laser-etched settings

39/49 PRO SHORT STEEL FRONT FENDERS• Unique design allows a 3,50” x 21” wheel with a 120/70-21” tire in a 39 mm

narrow glide fork or a 49 mm mid glide fork for an amazing look• Direct bolt-on black anodized billet bracket makes installation a snap• Stamped from 14-gauge steel

PART # DESCRIPTION1401-0689 For 18-19 FXBB/ FXLR, 06-17 FXDB/ FXDL/ FXDLS

PART # DESCRIPTIONFOR 09-19 FLHT/ FLHR/ FLTR/ FLHX MODELS0214-1761 Black anodized 0214-1763 Gold anodized0214-1762 Red anodized

PART # DESCRIPTION

1401-0688For 18-19 FXBB/ FXLR, 06-17 FXDB/ FXDL/ FXDLS w/ Mid Glide 49 mm forks

1401-0690 For 99-05 Dyna, 88-19 XL w/ Narrow Glide 39 mm forks

0214-1762

0214-17610214-1763

1401-0690

11 +49 (0) 6501 96 95 -2000 • partseurope.eu

Product NewsTHE DRAG SPECIALTIES

FEBRUARY 2019

TWIN RAIL MINI FLOORBOARDS• The perfect blend of

versatility, stylishness and comfort

• Multiple mounting points and splined peg adapters allow for maximum adjustability

• Can be used as passenger floorboards, highway pegs, or driver floorboards

• Seamlessly complements OEM styling

• Male mounts included• Sold in pairs

TWIN RAIL FOOTRESTS• Larger than footpegs but smaller than

floorboards, these footrests are perfectly sized

• Adjustable positioning for maximum comfort and clean style

• No modification required• Easy bolt-on installation• Sold in pairsNOTE: See the 2019 Parts Europe

FatBook for an explanation of footpeg mount styles.

PART # DESCRIPTION1621-0893 Chrome

PART # DESCRIPTION1621-0894 Black

PART # DESCRIPTIONCHROME1620-1861 W/o mounts1620-1862 W/ male mounts1620-1863 W/ M-Eight Softail driver mounts

PART # DESCRIPTIONBLACK1620-1864 W/o mounts1620-1865 W/ male mounts1620-1866 W/ M-Eight Softail driver mounts

1621-0894

1620-18611620-1863

1620-1865

1621-0893