The best of two worldsSwedish engineering is a quality trademark you can trust. When combined with high quality solar cells from Taiwan, in the PPAM Onyxium, high yields are reached with good ther-mal properties at low installation costs. PPAM Onyxium is produced using only high quality raw materials from leading suppliers. PPAM Onyxium is ideal for residential buildings, on facades, rooftops and large scale solar power systems.

PPAM Onyxium 350Glass-Glass

FlexibilityThe frameless glass-glass panel gives vast possibi-lities of applications, such as integrated in car-port roofing, green-house or other frame-less installa-tions.

Quality & WarrantyThe quality is assured by several quality control check points and tested prior to delivery. A final test is conducted in a solar tester, where the modules are tested under Standard Test Conditions (STC 1000W/m², AM 1.5, 25°C). Every modules test data is stored in our database with a unique serial number.

PPAM.se offer a product warranty of 12 years and a 30 year performance warranty for 80 % power output on all standard products. We are certified in accordance with:EN IEC 61215 (design qualification and type approval)EN IEC 61730 (safety qualification)SS-EN ISO 9001:2008 (Quality Management System)

PPAM uses high effi-ciency solar cells with substantially higher low-light performance and best thermal pro-perties. Integration of monitoring, safety, optimization and/or long strings available in integrated junction box.

info@ppam.se PPAM Solkraft013-39 20 40 ppam.se

75%

80%

85%

90%

95%

100%

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30YEAR

Power warranty

Electric properties.(STC 1000W/m2, 25°C, AM1.5)

info@ppam.se PPAM Solkraft013-39 20 40 ppam.se

0123456789

10

0 20 40 60

Cur

rent

[A]

Voltage [V]

IV-curve @ 25°C module temp.

1000W/m2

800 W/m2

600 W/m2

400 W/m2

200 W/m2

Physical properties

PPAM.SE Sweden AB reserves the right to make specification changes without prior notice. Please contact your nearest supplier/distributor or visit our website to obtain the latest specification sheet.

0123456789

10

0 20 40 60

Cur

rent

[A]

Voltage [V]

IV-curve@ amb, temp 25°C, U-value 29W/m²K

1000W/m², 52°C

800 W/m², 46°C

600 W/m², 41°C

400 W/m², 36°C

200 W/m², 30°C

PID-FREE UL-CCIC test report: 12CA63536

ModelMax. Power [Pmax]Open circuit Voltage [Voc]Max. Pow. Voltage [Vmpp]Short Circ.Current [Isc]Max. Pow. Current [Impp] Power ToleranceModule Efficiency

PPAM-Onyxium glass-glass350 Wp47,2V38,6 V9,61 A9,07 A0/+3%17,8%

CelltypeCell dimensionsCells/diodes per moduleFrameMaximum System VoltageModule WeightModule DimensionsTested temp. conditionsMax load

Monocrystalline 156x156mm72/3None1000 V25kg1979x 992 x 6mm-40°C to +85°C550 kg/m² front only (snow) 245 kg/m² back & front (wind)

NOCTVoltage Temp. CoefficientCurrent Temp. CoefficentPower Temp. Coefficent

45 °C-0.30%/K+0.06 %/K-0,39%/K