2
autop Maschinenbau GmbH Sandkampstr. 90 D-48432 Rheine Tel. ++49(0)5971/8602-02 Fax ++49(0)5971/8602-25 E-Mail: [email protected] www.autop.de autop lifts with manufacturers‘ approval The electro-hydraulic autop lifts are single, twin or 4-ram inground lifts with capacities from 3.0 up to 6.5 t on a high level of quality and innovative solutions for applications in the check-in, repair, maintenance and body shop as well as for test, MOT and wheel alignment. Especially our very complete range of swivel arm lifts offers a professional lifting of the complete range of vehicles of the company group. The advanced quality of the autop lifts is clearly visible on the products: Constructed and manufactured corresponding to EN 1493 Innovative superstructures Alarm system Bearing/guiding elements made out of a special alloy Cylinders hard chromed 30 µ Flexible synchronization / safety device Quality galvanizing Aggregate with suboil motor ecological oil Company certified DIN EN ISO 9001:2008 autop also grants a warranty of 5 years after date of despatch on the high pressure seal, on the bearing and on the synchronization device. The autop - range The key to your success! ...a company of the STENHØJ-group! autop lifts with manufacturers‘ approval autop Quattrolift Hydraulic 4-ram inground lift with 5 t capacity and a platform length of 5.50 m, for appli- cation in the reception as well as repair and wheel alignment. The precision of this lifts corresponds to the wheel-alignment requests of the car manu- facturers. This 4-ram lift has a high level of stabiliy and the well-proven components assure a very low cost of maintenance. An optional jacking beam can be used for the lifting of vehicles with difficult subconstructions. autop Biglift Solid transporter lift with 6.5 t capacity, for repair and maintenance as well as for body repair.: The perfect lift for the transporter generation, safe and perfect almost for vehicles with large wheel distances. The Biglift is available as platform lift and as swivel arm lift with piston distances of 1350 mm and 2150 mm autop Acessories: The autop range includes many useful accessories and complementary products such as: Power modules various lifting pads rubber blocks etc. autop grants 5 years of warranty after delivery: on piston sealings, guiding elements and synchronization device. 4.50 F 550 Wheel alignment VAS 6344 4.60 F 550 VAS 6734 powermodule 311 A 2.65 Saaa 145 VAS 6424 2.65 Saaa 230 VAS 6424 BS

The autop - rangeautop lifts with manufacturers‘ approval autop lifts with manufacturers‘ approval autop Sololift Hydraulic centre ram inground lift with 3.5 t capacity in a compact

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

  • autop Maschinenbau GmbHSandkampstr. 90D-48432 Rheine

    Tel. ++49(0)5971/8602-02Fax ++49(0)5971/8602-25

    E-Mail: [email protected]

    autop lifts with manufacturers‘ approval

    The electro-hydraulic autop lifts are single, twin or 4-ram inground lifts with capacities from 3.0 up to 6.5 t on a high level of quality and innovative solutions for applications in the check-in, repair, maintenance and body shop as well as for test, MOT and wheel alignment.

    Especially our very complete range of swivel arm lifts offers a professional lifting of the complete range of vehicles of the company group.

    The advanced quality of the autop lifts is clearly visible on the products: • ConstructedandmanufacturedcorrespondingtoEN1493• Innovativesuperstructures• Alarmsystem• Bearing/guidingelementsmadeoutofaspecialalloy• Cylindershardchromed30µ• Flexiblesynchronization/safetydevice• Qualitygalvanizing• Aggregatewithsuboilmotorecologicaloil• CompanycertifiedDINENISO9001:2008

    autop also grants a warranty of 5 years after date of despatch on the high pressure seal,onthebearingandonthesynchronizationdevice.

    The autop - rangeThe key to your success!

    ...acompanyoftheSTENHØJ-group!

    autop lifts with manufacturers‘ approval

    autop Quattrolift Hydraulic4-ramingroundliftwith5tcapacityandaplatformlengthof5.50m,forappli-cation in the reception as well as repair and wheel alignment. The precision of this lifts corresponds to the wheel-alignment requests of the car manu-facturers.

    This 4-ram lift has a high level of stabiliy and the well-proven components assure a very lowcostofmaintenance.Anoptionaljackingbeamcanbeusedfortheliftingofvehicleswith difficult subconstructions.

    autop BigliftSolid transporter lift with 6.5 t capacity, for repair and maintenance as well as for body repair.:

    The perfect lift for the transporter generation, safe and perfect almost for vehicles with large wheel distances.TheBigliftisavailableas• platform lift and as• swivel arm lift with piston distances of 1350 mm and 2150 mm

    autop Acessories:The autop range includes many useful accessories and complementary products such as:• Power modules• various lifting pads• rubber blocks• etc.

    autop grants 5 years of warranty after delivery: on piston sealings, guidingelementsandsynchronizationdevice.

    4.50F550WheelalignmentVAS6344

    4.60F550VAS6734

    powermodule311A

    2.65Saaa145VAS6424

    2.65Saaa230VAS6424BS

  • autop lifts with manufacturers‘ approval

    autop lifts with manufacturers‘ approval

    autop SololiftHydrauliccentreramingroundliftwith3.5tcapacityinacompactconstructionforbody-repair, repair and maintenance as well as for car washing.

    autop MasterliftHydraulictwin-ramingroundliftsforcheck-in,repairandbodyrepairaswellasfortestand MOT and with capacities of 3.0 or 3.5 t.

    Comfortableandsolidhydrauliccarliftsforaquickandprofessionallifting.

    The great choice of different lifting pads offers a high lifting comfort, even for cars with very difficult lifting points.

    autop CargoliftHydraulictwin-ramingroundliftwith5tcapacityforcheck-in,repair,maintenanceanddiagnostic.

    This lifts can be used from private cars up to commercial vehicles, which offers a full time utilization.

    autop ProfiliftHydraulictwin-ramingroundliftwith4tcapacityforreception,repair,maintenanceandMOT.TheProfiliftischaracterizedbythesolidconstructionwithcylinderdimensionsof140 x 9,5 mm. The energy supply is protected inside of the cylinder.

    autop Masterlift Combi Hydraulicdoubletwin-ramingroundliftwith3.5tcapacityforapplicationsinthecheck-in-, repair and maintenance- and diagnostic areas.Amulti-functionalplatformlift,combinedwiththeswivelarmliftSaavVANfornearlyallapplications in th ecar workshop.

    The most flexible workstation.

    1.35 Fv Uni

    2.35CombiCheck-in

    2.40F460VAS5248

    2.50F480VAS5252

    2.50Saav145VAS5250

    1.35Pv160-220xyVAS5243

    1.35SaSchwenkarmVAS5242

    2.35Pv160-220xyVAS5246

    2.35Saa135VAS5244/S

    2.35Saa2305244/B

    2.35Saav135VanBAS5245

    2.30Sav230VAS5247

    2.35SaavCombiVanVAS5249