the a-tick - fs94

  • Upload
    john-wu

  • View
    217

  • Download
    0

Embed Size (px)

Citation preview

  • 8/12/2019 the a-tick - fs94

    1/2

    CANBERRA

    Purple Building Benjamin OfficesChan StreetBelconnen ACT 2617PO Box 78Belconnen ACT 2616T: 02 6219 5555F: 02 6219 5200

    MELBOURNELevel 44, Melbourne Central Tower360 Elizabeth StreetMelbourne VIC 3000PO Box 13112 Law CourtsMelbourne VIC 8010T: 03 9963 6800

    F: 03 9963 6899

    SYDNEYLevel 15, Tower 1 Darling Park201 Sussex StreetSydney NSW 2000PO Box Q500Queen Victoria Building NSW 1230T: 02 9334 7700F: 02 9334 7799

    FS 94 February 2010 1 of 2

    The A-TickInformation for consumers

    What is the A-Tick mark?

    The A-Tick is a compliance mark produced by

    the Australian Communications and Media

    Authority (the ACMA) for telecommunications

    items. It gives consumers confidence that a

    telecommunications item meets the safety and

    technical standards set by the ACMA.

    What does the A-Tick look like?

    N###

    The A-Tick compliance label consists of the

    A-Tick mark and a supplier code number issued

    by the ACMA or some other form of supplier

    identification.

    What does the A-Tick mean?

    The A-Tick indicates that an item is compliant

    with the mandatory technical standards and can

    legally be connected to a telecommunications

    network. The A-Tick compliance label will appear

    on items such as fixed and mobile phones,

    answering machines, facsimile machines and

    modems.

    Do all consumer telecommunications itemshave to have an A-Tick?

    Telecommunications items must have an A-Tick

    or display a compliance label of a previous

    labelling scheme such as the Telecom

    Authorisation or AUSTEL permit. Items without

    an A-Tick or the previously accepted labels may

    be unsafe and cause harm if connected to the

    telecommunications network.

    You should also be aware that it is illegal to

    connect telecommunications items that do not

    carry the A-Tick compliance label and that

    penalties can be imposed.

    Where do I find the A-Tick ontelecommunications items?

    Generally, the A-Tick is on the base or at the

    back of an item. With mobile phones, it may be

    necessary to remove the battery from the phone

    to see the A-Tick mark. Laptop and desktop

    computers operated with removable PC modemcards may carry the A-Tick mark on the card

    rather than on the computer itself. Consideration

    is being given to items incorporating displays

    displaying the A-Tick on its screen. Contact the

    ACMA for further information.

    Does the A-Tick apply to all electricalproducts?

    No. The A-Tick only applies to

    telecommunications items.

    How do manufacturers or importers makeuse of the A-Tick?

    Manufacturers and importers, after seeking

    permission, may use the A-Tick symbol on their

    telecommunications items to show that their item

    is compliant with the mandatory technical

    standards and can be legally connected to the

    network.

    My fax has an AUSTEL permit number onit. Is this okay?

    Yes. The AUSTEL permit number was part of aprevious labelling scheme. This scheme stopped

    in June 1997. Items with this permit number can

    still be connected to the telecommunications

    network.

    My telephone has a Telecom Australiaauthorisation number on it. Is this okay?

    Yes. The Telecom Australia authorisation

    number was part of a previous labelling scheme.

    This scheme stopped in June 1989. Items with

    this authorisation number can still be connected

    to the telecommunications network.

  • 8/12/2019 the a-tick - fs94

    2/2

    FS 94 February 2010 2 of 2

    What do I do if I find a telecommunicationsitem without a compliance mark?

    Don't buy it. Tell the ACMA its make and model

    details and the location of the shop where you

    saw it and don't connect the item to the

    telecommunications network. RememberNoTick, no thanks.

    What is the C-Tick?

    The C-Tick is the compliance mark that applies

    to electrical and electronic products (including

    radios). Further details on the C-Tickare on the

    ACMA website.

    What are the recognised forms for labellingtelecommunications items?

    CANBERRA

    Purple Building Benjamin OfficesChan StreetBelconnen ACT 2617PO Box 78Belconnen ACT 2616T: 02 6219 5555F: 02 6219 5200

    MELBOURNELevel 44, Melbourne Central Tower360 Elizabeth StreetMelbourne VIC 3000PO Box 13112 Law CourtsMelbourne VIC 8010T: 03 9963 6800

    F: 03 9963 6899

    SYDNEYLevel 15, Tower 1 Darling Park201 Sussex StreetSydney NSW 2000PO Box Q500Queen Victoria Building NSW 1230T: 02 9334 7700F: 02 9334 7799

    Telecom Australia

    Authorisation No.

    C87/23A/999

    TELECOM Authorisation

    used on items authorised by

    Telecom (Telstra) up to June

    1989.

    AUSTEL PERMIT

    A93/23A/999

    AUSTEL Permit used on

    items permitted by AUSTEL

    from July 1989 to March 1996.

    N####

    C-TICK and AUSTEL permit

    number used on items

    approved from April 1996 to

    June 1997.

    N####

    The A-TICK and Supplier

    Identification have been used

    on items since July 1997.

    More information

    More information about theA-Tickis on the

    ACMA websiteor you can email the ACMA

    Standards Section at

    [email protected]

    Please note: this document is intended as a guide only andshould not be relied on as legal advice or regarded as asubstitute for legal advice in individual cases.

    http://www.acma.gov.au/WEB/STANDARD/pc=PC_2796http://www.acma.gov.au/http://www.acma.gov.au/WEB/STANDARD/pc=PC_2796http://www.acma.gov.au/mailto:%[email protected]:%[email protected]://www.acma.gov.au/http://www.acma.gov.au/WEB/STANDARD/pc=PC_2796http://www.acma.gov.au/http://www.acma.gov.au/WEB/STANDARD/pc=PC_2796