T&G Flooring

Technical Data

Kronofloor T&G flooring is suitable for a wide range of flooring applications including

floating and joisted floors.

Kronofloor is available in grade P5 with a tongue and groove profile on all four sides, P5 is available in two thickness’

18mm and 22mm.

KC/QUAL/DOC/0024 - 18/04/11

KRONOFLOOR - GENERAL PROPERTIES:

Thickness (sanded) EN 324-1 mm +/ - 0.3

Length & width EN 324-1 mm ± 2

Squareness tolerance EN 324-2 mm/m 2

Formaldehyde Class E1 EN 120 mg/100g 8≤

Moisture Content EN 322 % 5 to 13

PROPERTY TEST METHOD UNIT SPECIFICATION (EN 312)

Page 1 of 2

EN 323 kg/m2 >15 1 layer of 22mm P5

EN 323 kg/m2 >25 2 layers of 18mm P5

PROPERTY APPLICATION TEST METHOD UNIT REQUIREMENT

Sound

Insulation

Internal joisted floors,

within a single house

Internal joisted floors,

between apartments

KRONOFLOOR ACHIEVES THE REQUIREMENTS OF THE CONSTRUCTION PRODUCTS DIRECTIVE 89/106/EC

TO COMPLY WITH THE BUILDING

REGULATIONS PART E, USE:

KRONOSPAN T&G FLOORING SIZES:

18, 22mm

THICKNESS Size

2400 x 600

T&G PROFILE

For full fitting instructions please refer to theworking with guidelines in packs or atwww.kronospan.co.uk

Kronofloor

Technical Data KC/QUAL/DOC/0024 - 14/12/10

Page 2 of 2

KRONOFLOOR SPECIFIC PROPERTIES:

KRONOFLOOR ACHIEVES THE REQUIREMENTS OF THE CONSTRUCTION PRODUCTS DIRECTIVE 89/106/EC

Internal Bond

Swelling in thickness, 24hr

Bending Strength

MOE

IB after Cyclic test

Swelling in thickness after Cyclic test

PROPERTY TEST METHOD UNIT P5 18MM P5 22MM

EN 319

EN 317

EN 310

EN 310

EN 321

EN 321

N/mm²

N/mm²

N/mm²

N/mm²

%

%

0.45

10

2400

0.22

16

12

0.4

10

2150

0.20

11

14

Kronofloor P5

TYPE MM NORMAL USE MAX UDL PROFILE

18

Domestic

1.4

2.7

450

400

2400 x 600

GENERAL PROPERTIES

KN/m²MAX CL

KNMAXIMUM

JOIST SPACINGSTYLE DIMENSIONS BOARDS/

PACK

Domestic

Non-Domestic22

1.5TG4SEF

METIMP

862440 x 1220 40

1.52.5

1.4 600 TG4

TG4

SEF

SEF

METIMP

2400 x 6002440 x 1220

7032