TEXT AS OUTLINES

MASTER CATALOG | VOL 5

1

YOUR CHOICE

YOURGEAR

YOUR CHOICE

YOURGEAR

Fly ClosureHook & Loop withCompression SnapOuter, Zipper Innerwhen integrated beltis chosen. Many otherclosures availablewithout belt option.

VELOCITYDesigned for Rapid Response.

Escape/Ladder BeltOptional · For superior comfort; makes suspenders optional. Belt is protected from excessive wear by an outer shell material channel.

32

Valor combines traditional fit with ergonomic design for a lightweight bunker gear alternative assuring fire-fighters are able to move freely and fast. Ultra FlexWing Expanded Back combined with pleated FlexElbows and FlexKnees provide continuous comfort for those extended periods of fire fighting. Engineered with minimal seams for maximum durability.

Also available for Proximity Aircraft Rescue Fire Fighting. Ask for the Vector Lite series.

YOU choose your pocket sizes, locations, reinforcements or linings. Tell us which accessories, trim configuration and closures fit your department’s needs. If you don’t see the option that you are looking for... just ask for it.

YOUR CHOICE

YOURGEAR

YOUR CHOICE

YOURGEAR

VALORMove Freely. Respond Quickly.

Garments are pictured with popular options.

Nomex® BartackReinforcementsCoat & Trousers Double row bartacks providesuperior strength at the garmentstress points

Nomex® Triple StitchedPrimary seams, coat & trousersEnsures maximum durability.

Coat and Trouser images are shown with NFPA NY application style.

Multiple Closure OptionsThe pictured coat features Hook & Loop/Zipper system.

28” inseamstandard,customized in1” increments

FlexKneesPleats on either side ofeach knee along withcorresponding liner darts

Nomex® Triple StitchingPrimary seams for coat & trousers are triple needle, felled seams ensuring maximum durability.

Ultra FlexWing Expanded BackOuter Shell and Inner LinerEnhances range of motion

Your Choice CoatsAvailable in lengths from 29 to 45 inches.

Fly ClosureHook & dee outer, hook & loop inner. Many otherclosures available.

Your ChoiceTrouser BackChoose waist high with a35” coat, semi-high with a32” coat or high back witha 29” coat.

VALOR SERIES: UL certified to meet or exceed current edition of NFPA 1971 Standard.

All coats available with or without throat tab.

54

Vanguard maximizes traditional fit styling with first class quality and attention to detail. Now including a FlexWing Expanded Back, pleated FlexElbows and pleated FlexKnees. Choose a short style coat with a high back trouser and you have the lightest combination of gear available. Engineered with minimal seams for maximum durability.

Also available for Proximity Aircraft Rescue Fire Fighting. Ask for the Vector series.

YOU choose your pocket sizes, locations, reinforcements or linings. Tell us which accessories, trim configuration and closures fit your departments’ needs. If you don’t see the option that you are looking for... just ask for it.YOUR CHOICE

YOURGEAR

YOUR CHOICE

YOURGEAR

Yoc StrapDrag rescue device is standard on all NFPA compliant Veridian Structural and Proximity coats.

Nomex® BartackReinforcementsCoat & TrousersDouble row bartacks provide superior strength at the garment stress points

Your ChoiceTrouser BackChoose waist high with a 35” coat, semi-high with a 32” coat or high back with a 29” coat.

Nomex® Triple StitchedPrimary seams, coat & trousersEnsures maximum durability.

FlexWing Expanded BackOuter Shell and Inner LinerEnhances range of motion

FlexKneesPleats on either side of each knee along with corresponding liner darts

Multiple Closure OptionsThe pictured coat features Hook & Loop/Zipper system.

Comfort Collar Available with Nomex® knit liner.

Your Choice CoatsAvailable in lengths from 29 to 45 inches.

Fly ClosureHook & Loop with Compression Snap Outer, when integrated belt is chosen. · Many other closures available without belt option.

28” inseam standard, customized in 1” increments

Garments are pictured with popular options.

VANGUARDUnmatched Performance.

New Padded Reinforced Knee with Multi- Directional Flex Technology See p14 for details

VANGUARD SERIES: UL certified to meet or exceed current edition of NFPA 1971 Standard.

76

MATERIAL OPTIONS• 6.5 oz. TenCate Defender M™ • 6 oz. TenCate Brigade™ with Nomex®

Dual-Certified NFPA 1951/1977

Veridian’s Tech Rescue Utility gear delivers the flexibility and freedom of movement that rescue and extrication work demands without having to jeopardize your structural gear. Roomy design elements coupled with reinforced elbows and padded reinforced knees create an exceptionally durable and comfortable set of gear. Veridian Tech Rescue Utility series gear is made in the USA making prompt shipment for custom sizes and features a reality.

TECH RESCUE UTILITY SERIES: UL certified to meet or exceed current editions of NFPA 1951/1977 Standards.

TECH RESCUE UTILITY

Heavyweight Protection. Lightweight Comfort.

Garments are pictured with popular options.

Seamless Underarm Bellows & FlexWing Expanded BackEnhances range of motion

Poly Coated Kevlar® Reinforced Elbows

Semi Bellows Pockets

Utility Belt Loops & Elastic WaistComfortable standardwaist features

Poly Coated Kevlar®

Padded ReinforcedKnees

Zippered LegExpansions

Left Chest RadioPocketwith a mic tab

Cuff AdjustersCoat & Trousers

Rear Hip Pocket

Wide Backloop won’t gap when you bend

30” inseamstandard,customized in1” increments

As shown: TenCate Defender M™ 1951/1977 dual certified

Center Bellow Pockets

Front Slash Pockets

98

Seamless UnderarmBellows & a FlexWingExpanded BackEnhances range of motion

Semi BellowsPockets

Utility Belt Loops & Elastic WaistComfortable standardwaist features

Zippered LegExpansions

Left Chest RadioPocketwith a mic tab

Cuff AdjustersCoat & Trousers

Rear HipPatch Pocket

30” inseamstandard,customized in1” increments

Garments are pictured with popular options.

Veridian’s Wildland Gear provides serious protection in a comfortable, two piece, lightweight package. Designed to work as hard as you do without slowing you down. As with all Veridian gear, our Wildland series is made in the USA making prompt shipment for custom sizes and features a reality.

WILDLANDComfortable, Yet Rugged.

WILDLAND SERIES: UL certified to meet or exceed current edition of NFPA 1977 Standard.

Wildland Gloves See Page 13

Front Slash PocketsMATERIAL OPTIONS

Certified NFPA 1977 • 7 oz. TenCate Tecasafe® Plus• 9 oz. Westex Indura® cotton• 7.25 oz. TenCate Advance®

Dual-Certified NFPA 1951/1977 • 6.5 oz. TenCate Defender M™• 6 oz. TenCate Brigade™

with Nomex®

1110

680 Series EZ Adjust Padded H Back Button Free SuspendersSimply pull down on the EZ round rings to tighten, flip up the tab to release. 4 point Velcro and self material tab attachment. Available in White, Red or Black.

VV-525H-W-W for Waist-High Trouser, 44” length

VV-525H-S-W for Semi-High Back Trouser, 42.5” length

580 Series X Back Elastic Suspenders2” wide leather ends. Adjustable length with brass slides. 8 point attachment.

VB-580X-W-R For Waist-High Trouser 41” length

VB-580X-S-R For Semi-High Back Trouser 37” length

525 Series EZ Adjust Padded SuspendersSimply pull down on the EZ round rings to tighten, flip up the tab to release. 8 point attachment.Available in White, Red or Black.

PBI 20% PBI80% Rayon VPR-PBIAvailable in tan

P84 40% P8455% Lenzing5% Kevlar® Rib KnitVPR-P84 Available in gold

Nomex® 100% Nomex® Rib KnitVPR-NX Available in white

VIPER HOODSSUSPENDERS

Nomex®/Lensing20% Nomex®80% Lenzing Rib KnitVPR-NXLN · whiteVPR-NXLN-BH · black heatherVPR-NXLN-PK · pink

X Back VB-525X-W-W for Waist-High Trouser, 52” length

VB-525X-S-W For Semi-High Back Trouser, 37” length

H Back VB-525H-W-W for Waist-High Trouser, 47” length

VB-525H-S-W for Semi-High Back Trouser, 42” length

Additional styles available. Customizable sizes available upon request. Contact sales for options.

Tagless DesignImprinted warning label replaces a sewn-in tag.

VIPER HOODS: UL certified to meet or exceed current edition of NFPA 1971 Standard.

1312

FIRE ARMOR GLOVE GLOVES

• One-piece back shell made of ultra flexible 100% FR Para Aramid knit fleece

• Engineered with Nomex®/Kevlar® thermal liner on back of hand for superior thermal protection; Modacrylic on palm of hand for superior comfort and dexterity

• 100% water proof, viral/chemical penetration resistance and blood borne pathogen protection

• Five separate curved form fitting forchettes for maximum finger dexterity

• Exclusive breathable adhesive ensures liner/barrier is fully bonded. Liner will NOT pull out

• One-piece palm cowhide suede leather stays soft when wet with low water absorption

• Wristlet Style: 4” Black Nomex® wristlet with leather pull patch and hang-up loop

• Cadet sizing available

A true three-dimensional structural firefighting glove with curved finger design and inset thumb.

Fire Hog · Structural Firefighting Gloves• Cowhide suede leather stays soft and provides low water absorption when soaked repeatedly

• Non-restrictive knuckle band provides an extra layer of protection in high abrasion area

• Smooth grain cowhide leather back

• Extra layer of suede leather sewn in the thumb/palm interface provides extra grip and extended wear

• FR Modacrylic liner provides smooth feel

• Strong and breathable adhesive bonds glove layers Liner will NOT pull out

• Wristlet Style: 4” black Nomex® wristlet with leather pull patch

Wildland · Firefighting Glove• Flame, heat, cut, & puncture resistant, cowhide suede leather• Black leather palm on glove wear surface; glove back in gold leather 4” long double layer knit

Kevlar® wristlet with leather pull patch on palm side• Low-impact on hand dexterity; enhancement of grip ability under dry & wet conditions• UL certified to meet or exceed current edition of NFPA 1977 Standard

Gauntlet Style Shown – Wristlet Style Also Available

Also Available in Gold/Black

Gauntlet style shown – Wristlet style also available

Wristlet shown – Gauntlet style also available

Fire Pro II · Structural Firefighting Gloves• Flame and heat resistant cowhide suede leather for overall heat protection• Full sock FR Modacrylic liner• Wristlet Style: 4” Black Nomex® wristlet with leather pull patch• Gauntlet style has a 2 inch all leather cuff sewn at top of glove

ALL STRUCTURAL GLOVES: UL certified to meet or exceed current edition of NFPA 1971 Standard.

Veridian gloves are made from all USA manufactured materials and produced in the USA with a highly skilled work force.

• Pyrotect breathable moisture barrier is featured in all Veridian structural gloves: Fire Armor, Fire Hog & Fire Pro II

• A 3 mil barrier that is 100% waterproof, viral/chemical penetration resistant and protects against blood borne pathogens

• Extends full-length of the glove for complete protection

1514

POCKETSPockets are available lined or reinforced with moisture barrier, self material, leather, Kevlar®, or poly coated Kevlar®. Bellows and Semi-Bellows pockets can be ordered in a divided style for multiple interior compartments. Pockets located on lower hem of coat include reflective trim.

Tool Pocketwith internal Kevlar® pocket dividers

Center Bellows w/Hand WarmerAlso available withoutHand Warmer

Bellows w/ HandWarmerAlso available withoutHand Warmer

Semi-BellowsAvailable with HandWarmer

Hand Warmer Patch T-Flap Radio

Radio Patch Utility

Face Mask Gunn2 interior pouches– only available w/ 5” or 6.5” storm flap

Bail-Out PocketKevlar® lined w/ handbrake cradle

Thermal padding is available with reinforcement options:

Possible reinforcement materials are poly-coated Kevlar®, leather, or self material

Coat and trouser cuffs are available with the same reinforcement materials

Trouser cuffs can be optionally angled to ensure that they are not subject to wear and tear from the boot heel

Individual padded diamond pockets allow complete flexibility & unmatched performance

Poly-coated Kevlar® for superior performance, in black, gold, or gray

Optional inner knee padding pocket for added comfort & protection

Available in a Replaceable Knee Frame

Padded Reinforced Knee with Multi-Directional Flex Technology

Like our pockets, Veridian accessories can be customized to fit your needs. Pictured here are popular accessories. Don’t see what you want? Contact your sales representative to discuss how we can provide the unique options that you require.

Flashlight Snap/StrapSurvivor

SL90 Flashlight Holder

Flashlight Pass Tab/StrapSunlance

Mic Tab

Utility Loop

Pass TabSturdy leather tabencased in selfmaterial

Snap Hook

Dee Ring

Heavy Duty or Multipurpose Clip

Glove Strap Belt LoopsSet of 5 belt loops at trouser waist

Side Take Up Straps

Postman Slide Take Up Straps

Replaceable Knee Framewith padded knee reinforcement

Inner Knee Pocket w/Pad

Zipper Leg Expansion

Exterior Harness Loopswith Hook & Loop/Compression Snap closure for easy and secure harness installation

Integrated Belt2” wide Kevlar® webbing w/ side-release buckle, encased in the trousers; elastic back; suspenders can still be used

Internal Class II Harness also available as an external option with harness loops

ACCESSORIES

REINFORCEMENTS

Wristlets are available in white or black Nomex®, or natural yellow Kevlar®.

8” Thumbthru wristlet

4” Thumbtab wristlet

4” Wristlet

Doublewristlet

Escape/Ladder Beltwith Hook & Dee Ring

REFLECTIVE

1716

IMPORTANT:Your Veridian coat and/or trouser sizing will be more accurate if you take extra care with measurements. The following list of measurements are necessary for both men’s and women’s garments.

Coats:1. Chest size: Measure loosely over clothing around the fullest part of the chest with the arms at rest. For individuals with broad shoulders, muscular arms and/or back, an additional over the arm-chest measure is extremely helpful. Again, measure loosely over fullest part of chest with arms at rest. Round up both measurements to nearest even size.

2. Sleeve length: You should expect that Veridian’s standard sleeve length per size would fit a vast majority of fire fighters. Otherwise, with arms straight down to side, measure from the base of the back of the neck, over the shoulder and down the arm to the base of the thumb.

Trousers:3. Waist: Measure around waist, over any clothing that would be worn under trousers. Typical men’s measurement will be taken just above pant waist, or belt.

3a. Stomach: Please include measurement around stomach for high back trousers.

4. Inseam: Standard inseam lengths are available in one inch increments. Inseam length should be shorter than regular trouser inseam to prevent damage to cuffs. Measure from the crotch down the inside of the leg to the bottom of the ankle bone.

5. (Female) Hip: Measure around the fullest part of the hip area.

Coat (Outer/Inner)• Hook & Loop/Zipper

• Hook & Loop/Snap Hook & Dee with Compression Snap (Chicago Style)

• Hook & Loop/Snap Hook (Phoenix Style)

• Snap Hook & Dee/Hook & Loop

• Snap Hook & Dee/Compression Snap

CLOSURES

FITTING AND MEASUREMENT GUIDE

Comfort Trim, Lime Yellow & Red Orange 3M™ Scotchlite™ Reflective Material

3” Striped Reflexite®

Decoration · 3.5” American Flag Nomex® or Nomex® Subdued · 3.5” Canadian Flag Nomex®

Letter PatchesLetters are available in 2” or 3” and in Lime Yellow, Red Orange or Reflexite®. Patches are available to customer’s specified size and location. Letter application choices include:

RemovableSnap Letter Patch,Name Tail Patch(with or withouttrim), Velcro LetterPatch.

Sewn OnSewn Letter Patch,Direct Lettering,Sew On TaperedTail Patch (with orwithout trim).

NFPA Basic

Trim Styles - Coats Trousers

NFPA w/High Visibility

New York

New York w/High Visibility

NFPA Basic

Vertical Side

Reflective Trim Materials

Triple Trim, Lime Yellow & Red Orange 3M™ Scotchlite™ Reflective Material

Solid Trim, Lime Yellow & Red Orange 3M™ Scotchlite™ Reflective Material

3” and 2” Solid Reflexite®

Trouser (Outer/Inner)• Snap Hook & Dee/Hook & Loop

• Snap Hook & Dee/Compression Snap

• Snap Hook & Dee with Hoop & Loop/Zipper

• Hook & Loop with Compression Snap/Zipper [Optional integrated belt with this closure]

For an acuurate fit for your custom Veridian gear, use Veridian’s measuring guide. www.veridian.net

FITTING GUIDE