Testing Capability & Price List - Standard Group · Regular Service : 4 Working Days - Regular Price Express Service : 3 ... ISO 17025 Certified by NABL ... AATCC 107 ISO 105 E01

Testing Capability & Price List

IMPORTANT INFORMATION FOR CUSTOMER

1.

Testing Services Available (Time excluding sample s pickup and report hard copy delivery):

Regular Service : 4 Working Days - Regular Price Express Service : 3 Working Day - 30% Surcharge Emergency Service : 2 Working Day - 60% Surcharge Shuttle Service : 1 Working Day - 100% Surcharge

Express, Emergency & Shuttle Service depend s on the capability and limited for some selected test properties. Please contact laboratory before submission.

2. A working day normally commences at 9 a. m. Test requisitions received after 2 p.m. will be entertained as submission s of the following day.

Laboratory is open 7 days a week except Public Holidays.

3. Where the lab test request covering several tests requiring different speeds of service, the final test report will not be issued until all tests are comple ted. However, verbal test result for the completed test can be given upon request.

4. Standards, requirements and regulations of the destined countries will be the basis for our testing and analysis.

5. There is a minimum charge of US$10 per report issued.

6. Tested samples will be retained for a working period of 6 months only.

7. Quantity discount is available on contract basis, subject to agreed minimum volume.

8. To ‘Stop’ or ‘Hold’ any request, applicant need to inform laboratory by written communication within 1 st working day.

9. In case of Subcontracted test properties (LabTEX services need to send some other laboratory), service turn around ti me will be 7-10 days.

10. All prices mentioned in this book exclusive of VAT

11. Payment for the requested test items should be cleared before delivery of the report.

12. Report courier inside Bangladesh is free of cost.

13. labTEX services preserves the righ t to change the conditions and testing fees without prior notice.

14. General Sample Requirement: Fabric : 2 Square yards / Sample and Garments : 2 garments / Sample

PLEASE CONTACT WITH US FOR YOUR INQUIRY

Name Designation Mobile Number E-mail

Mr. Mir Tofazzal Hossain Manager – Laboratory +88-0171-2186844 [email protected]

Mr. Shuvasish Barua Asst. Manager – Laboratory +88-0183-0062764 [email protected]

Page 1 of 7 Update: 09-03-2010

Corporate member MemberOrganizational Member Corporate member

labTEX Services, CET, Industrial Plot # 1, Block-E, Avenue-1 (Kalshi), Mirpur-11, Dhaka-1216, Phone: 880-2-8010120, 8057052, Ext.: 5198, 5199, Dir: 805 1271 Fax: +880-2-9000244, E-mail: [email protected], web: www.labtex.com.bd

ISO 17025 Certified by NABL

+88-0192-2785614 [email protected] Syed Bulbul Ahmed BD Officer


A. DIMENSIONAL STABILITY (SHRINKAGE) & RELATED TEST Srl.#

Test Properties Test Method US/Canada

Test Method EU/Others

Price (US$)

1. gnihsaW ot ytilibatS lanoisnemiD a. Fabric Shrinkage (i) 1 Wash AATCC 135 BS EN 25077

BS EN ISO 6330 ISO5077

15 82 “ sehsaW 3 )ii( 04 “ sehsaW 5 )iii(

b. Garment Shrinkage (i) 1 Wash AATCC 150 BSEN 25077

BS EN ISO 6330 ISO5077

17 13 “ sehsaW 3 )ii( 44 “ sehsaW 5 )iii(

2. hsaw dnaH lautcA ot ytilibatS lanoisnemiD

51 hsaw 1 )i( cirbaF .a 82 hsaw 3 )ii( 71 hsaw 1 )i( tnemraG .b 13 hsaw 3 )ii( 6 elcyC hsaW lanoitiddA hcaE

3. Dimensional Stability to Commercial Dry-cleaning i) Fabric Commercial Process 22 ii) Garment Commercial Process 24

51 elcyC gninaelc yrD lanoitiddA hcaE

4. Dimensional Stability to Steam (Wira) – Fabric BS4323: 1979 ISO 3005 : 1978

15 - Garment 17

5. Dimensional Stability to Steam Ironing By Domestic Iron/Industrial Steam Iron 13

6. Appearance After Laundering Fabric - 1 Wash 20 With CF to Actual Laundering - 3 Wash 33

Garment- 1 Wash 22 63 hsaW 3 -

7. Appearance After Hand wash Fabric - 1 Hand washing 20

- 3 Hand washing 33 Garment - 1 Hand washing 22

63 gnihsaw dnaH 3 -

8. Appearance After 1 Commercial Dry cleaning - (i) Fabric 27 (ii) Garment 29

9. Dimensional Stability to Washing + Appearance- Fabric -1 Wash AATCC 135 BS EN 25077

BS EN 26330 ISO 5077 ISO 6330

20 33 “ hsaW 3 22 051 CCTAA hsaW 1-tnemraG - 63 “ hsaW 3-

10. Appearance after crease resistance Fabric - 1 Wash AATCC 88C ISO 7769 : 2006 20

- 3 Wash “ - 33 22 6002 : 9677 OSI 341 CCTAA hsaW 1 -stnemraG 63 - “ hsaW 3 -






Srl.#



Price (US$)

11. 7 gninorI tnemraG hcaE

12. Appearance after Steam Pressing Iron By Domestic Iron/Industrial Steam Iron 13

13. Dimensional Stability to Steam Press (Commercial Process) (i) Fabric 15

(ii) Garment 17

14. Spirality (Distortion) - Degree & % Method a. After 1 Wash AATCC 179 Related Measuring Scale

20 23 hsaW 3 retfA .b

15. Smoothness of Fabric / Seams AATCC 124, 88B 25






B. COLOURFASTNESS TEST Srl.#



Price (US$)

16. Washing - a) Washing Temperature: 30°C/85°F - 60°C/ 140°F

AATCC 61 No. 1A, 2A

ISO 105-C10 : 2006 ISO 105 C06 : 1994 Test A-C/ISO 105 C05/BS 1006 C01-

C03, CAN/CGSB-4.2 No. 19.1

10 21 F°041 / C°06 revO :erutarepmeT gnihsaW )b

17. 21 01C-501 OSI adoS dna paoS ro paoS htiw gnihsaW

18. Rubbing / Crocking - (i) Original

AATCC 8/116 BS EN ISO

105 X12 :2002 , CAN/CGSB-4.2

No. 22

9 61 hsaW 1 dna lanigirO )ii(

19. 51 CCTAA noitaripsreP ISO 105 E04/BS

1006 E04/DIN 54020

15

20. 51 06135 NID avilaS

21. Saliva and Perspiration 35 LMBG & 8210.1 25

22. Water (Static Wetting)

- With Self-staining AATCC 107 ISO 105 E01

BS 1006 E01 10

23. -501 OSI NE SB 261 CCTAA retaW )looP( detanirolhC

E03 : 1997 15

24. / 20E 501 OSI 601 CCTAA retaW aeS

BS 1006 E02 10

25. 7OE 501 OSI 401 CCTAA gnittopS retaW

BS 1606 E07 8

26. dohteM esuoH-nI hcaelB enirolhC 10

27. dohteM esuoH-nI hcaelB enirolhC noN 10

28. Dry cleaning (with assessment on staining of solution) AATCC 132 ISO 105 D01: 1993 BS EN ISO 105-D01

13

29. 7 gninorI dnaH

30. esuoH-nI gniwolleY cilonehP

Method ISO 105 –X18 22

31. 71 dohteM esuoH-nI ytilibaruD tnirP

32. 51 )srh 84( 361 CCTAA refsnarT eyD 33. Ozone 1st Cycle

AATCC 109 ISO 105G03, BSEN ISO105G03

25 2nd 51 elcyC






C. FABRIC/GARMENT PERFORMANCE TESTSrl.#



Price (US$)

34. Tensile Strength (i) Grab Method ASTM D5034 BS EN ISO 13934-2 15 (ii) Strip Method ASTM D5035 BS EN ISO 13934-1 15

35. Tear Strength a. Elmendorf Method ASTM D1424 EN ISO 13937-1 15

1622D MTSA dohteM eugnoT .b BS EN ISO 13937-2 BS EN ISO 13937-4 BS EN ISO 13937-3

15

36. 3861D MTSA )maeS reP( htgnertS maeS BS EN ISO 13936-1

/ISO 13935-2 12

37. Peel Bond Strength/ Bonding Strength of Laminated

Fabrics ASTM D 2724 AATCC 136

BS EN ISO 11339:2005/BS

5350 Part C12/JIS L 1089

12

38. 3861D MTSA )maeS reP( ytilibahctertS maeS

(Mod) BS 3320 (Mod) 12

39. Garment Seam Strength (per garment)- Upto 3 to 6 Seam 18

73 revO & maeS 9 otpU -

40. 434D MTSA egappilS maeS BS EN ISO 13936-1 , 2 & 3 : 2004

15

41. 51 5991 : 2602 OSI 6522D MTSA htgnertS daerhT elgniS

42. 51 9891:2-2391 sB 6522D MTSA htgnertS pooL

43. Abrasion Resistance (Martindale) - First 10000 rubs ASTM D 4966 ISO 12947-1,2,3 15

5 sbur 00001 fo trap ro rehto yrevE

44. 2-54921 OSI 0794D MTSA )eladnitraM( ecnatsiseR gnilliP SN 198525

17

45. ,1185SB sruoH 5 otpU – )ICI( ecnatsiseR gnilliP BSEN ISO 12945-1

17 52 srh 01 tneuqesbuS -

46. Water Repellency - (Spray Test) a. As Received AATCC 22 ISO 4920 15

33 gnihsaW 3 retfA & erofeB .b 13 gninaelC yrD 1 retfA & erofeB .c

47. 18 CCTAA detcartxE retaW fo Hp ISO 3071/

EN 1413 (With KCL)18

48. 51 62 CCTAA tseT gniegA

49. Stretch & Recovery / Stretch Properties ASTM D2594 (Knit)

ASTM D3107(Woven)BS EN 14704-1 20






D. FABRIC CONSTRUCTION ANALYSIS Srl.#



Price (US$)

50. Woven Fabric count (Threads per Unit Length) ASTM D3775 ISO 7211/2 BS EN 1049-2:1994

12

51. 51 8891:1445 SB 7883D MTSA )ytisneD hctitS( tnuoc cirbaF tinK

52. Yarn Size / Yarn Count - Woven or Knit (per yarn) ASTM D1059,

D1907 ISO 7211/5 BS 2865

12

53. Fabric Type / Type of Weave a. Simple Structure 10

54. 4773D MTSA htdiW cirbaF

ASTM D3887 Sec 10

ISO 3932 7

55. 6773D MTSA aera tinu reP - thgieW cirbaF BS 2471, ISO 3801 12

56. Skew or Bow a. After 1 Wash ASTM D3882 20

b. After 3 Wash 32 E. GARMENT ACCESSORIES TEST Srl.#



Price (US$)

57. 01 6002 : 4803 SB 1602D MTSA )noitces rep( htgnertS reppiZ Zipper Strength (Full package excluding reciprocating test) ASTM D2061 50

58. Strength of Velcro Tape Sheer & Peeling 12

59. Impact Resistance of Buttons (for 10 pieces) i) For 10 Pieces ASTM D5171 BS 4162 : 1983 15 Each additional 10 Pieces 10

60. Button Strength Per max. 5 sets of same type In-House Method 12

5 htgnertS panS 5 lanoitidda hcaE

61. Button Tension Test Per max. 5 sets of same type 16 CFR Part 1500 51-53 Part F 12 Each additional 5 Snap Strength 5

62. Snap Tension Test Per max. 5 sets of same type 16 CFR Part 1500 51-53 12

Each additional 5 Snap Strength 5

63. Snap Torque Test Per max. 5 sets of same type 16 CFR Part 1500 51-53 12 Each additional 5 Snap Strength 5

64. Snap Attachment Strength Per max. 5 sets of same type ASTM 4846 /

SAFQ 12

Each additional 5 Snap Strength 5

65. Snap/Unsnapping Force - per max. 5 sets of same type ASTM 4846 / SAFQ

12 Each Additional 5 Snap Strength 5






F. COMPOSITION TEST Srl.#



Price (US$)

66. Qualitative Analysis ( Microscopic Method ) AATCC 20 ISO 1833, BS4407 15

67. Quantitative Analysis a. Mechanical Method/Chemical Method (upto 2 Common Fiber)

AATCC 20A ASTM D629

BS 4407 ISO 1833 ISO 5088

15 7 rebiF lanoitidda hcaE

b. By Microscopic Method (i) Natural Cellulosic Fiber (Cotton, Linen)

15

2 Cellulosic Fiber Blend (Cotton & Viscose, Linen & Viscose) 100 05 looW )ii(

G. TEXTILE ANALYTICAL TEST Srl.#



Price (US$)

68. 81 dohtem tset esuoh-nI kcehC topS – edyhedlamroF 211 CCTAA tseT esaeleR – edyhedlamroF ISO 14184-1/ISO

14184-2/EN ISO 14184-1/EN ISO 14184-2/JIS L

1041

50

69. 81 dohtem tset esuoh-nI tseT topS lekciN

H. OTHER TEST Srl.#



Price (US$)

70. Farnsworth-Munsell 100 Hue Test & Ishihari Colour Vision Test

90 for 3Person Group

71. Metal Detection Test (For each 1000 Pcs Garments) 100





Documents

Testing Capability & Price List - Standard Group · Regular Service : 4 Working Days - Regular Price Express Service : 3 ... ISO 17025 Certified by NABL ... AATCC 107 ISO 105 E01