Test1 Communicating Over the Network NOUTOT

  • Upload
    yrfly

  • View
    215

  • Download
    0

Embed Size (px)

DESCRIPTION

Test1 Communicating Over the Network NOUTOT

Citation preview

SEMESTER 1 MODULE 1

Test 1 Communicating over the Network I1.

What are the 3 primary types of media used in modern networks? (chose three)Modem; Metallic wires within cables; Bit; Glass or plastic fibers (fiber optic cable); Wireless transmission; Server; Protocol.

What device is considered an intermediary device?

file server; IP phone; printer; switch; laptop.

What device is considered an intermediary device?

file server; laptop; printer; router; IP phone.

What device is considered an intermediary device?

file server; wireless access points; IP phone; laptop; printer

2.What is the PDU for the Internet Layer?

Segment; Frame; Bits; Packet; Header; Transport.

What is the Transport Layer PDU?

Bits; Segment; Frame; Packet; Header; Transport.

What is the PDU for the Network Acces layer?Data; Frame; Packet; Header; Transport.

What is the PDU for the Network layer?Frame; Packet; Header; Transport; Data

3.Which layer encapsulates the segment into packets?

Physical; Data link; Network; Transport; Network Access.

The form that a piece of data takes at any layer is called:

Corruption of a frame during transmission

Data reassembled at the destinationProtocol Data Unit (PDU)

Retransmitted packets due to lost communication

Which layer encapsulates the segment into packets?

Physical; Internet; Data link; Transport; Network Access.

Which statements correctly identify the role of intermediary devices in the network? (Choose three.)

initiate data communications

retime and retransmit data signals

originate the flow of data

manage data flows

final termination point for data flowdetermine pathways for data

4.

What is the layer 2 address called?MAC address; IP address; BIT address; BYTES address;

What is the layer 3 address called?MAC address; IP address; BIT address; BYTES address;

What is the layer 2 address called?IP address; MAC address; BIT address; BYTES address;

What is the layer 3 address called?MAC address; BIT address; BYTES address; IP address.

5.

What are the two primary models used when describing networking?TCP/IP; OSI; TCP; IEEE; IP4; Network.

What are the two primary models used when describing networking?TCP/IP; TCP; Internet; IP4; MAC; Network; OSI.

What are the two primary models used when describing networking?TCP/IP; TCP; Internet; OSI; IP4; Network.

What are the two primary models used when describing networking?TCP; ISO; Internet; IP6; Network; OSI; TCP/IP.

6.

How many bits make up an IPv4 address?24; 32; 64; 128; 33; 255; 4.

How many bits make up an IPv4 address?4; 1028; 24; 32; 64; 128; 256.

How many bytes make up an IPv4 address?256; 4; 32; 64; 128; 10; 2056.

How many bytes make up an IPv4 address?1024; 8; 32; 64; 4; 128; 10.

7.Convert the binary number 10010001 to decimal.135; 157; 160; 145; 159

Convert the binary number 11111000 to decimal.235; 260; 245; 250; 248;

Convert the binary number 10101011 to decimal.281; 171; 170; 169; 181.

Convert the binary number 11111110 to decimal.234; 230; 256; 128;254

8.

Convert the decimal number 212 to binary.

11000100; 11000101; 11000110; 11010100; 11100100.

Convert the decimal number 220 to binary.

11000 00; 11000100; 11011100; 11000100; 11100100

Convert the decimal number 243 to binary.

11000001; 11100101; 11000101; 11100101; 11110011.

Convert the decimal number 211 to binary.

11000101; 11100101; 11000101; 11010011; 111001111

9.Define segmentation of messages:

Process used to interleave the pieces of separate conversations together on the network.

Division of the data stream into smaller pieces.

What are two functions of encapsulation? (Choose two.)

tracks delay between end devices

enables consistent network paths for communication

allows modification of the original data before transmission

identifies pieces of data as part of the same communication

ensures that data pieces can be directed to the correct receiving end device

Which characteristic correctly refers to multiplexing?Manage data flows

Originate data flowProcess used to interleave the pieces of separate conversations together on the networkRetime and retransmit data signals

Determine pathways for data

What is an intranetwork?

A private connection of LANs and WANs that belongs to an organization, and is designed to be accessible only by the organization's members, employees, or others with authorizationA global mesh of interconnected networks (internetworks) meets these human communication needs

10.What is the largest number that can be held in one octet (8 bits)?254; 256; 128; 255; 512;1024

What is the largest number that can be held 4 bits?9; 17; 4; 15; 16; 255.

What is the largest number that can be held 6 bits?31; 15; 64; 61; 255; 63.

What is the largest number that can be held 5 bits?5; 30; 63; 30; 31;255

11.Which two layers of the OSI model have the same functions as the TCP/IP model Network Access Layer? (Choose two.)

Physical; Network; Transport; Data Link; Session

What is the proper order of the layers of the OSI model from the highest layer to the lowest layer?

physical, network, application, data link, presentation, session, transport

application, physical, session, transport, network, data link, presentation

application, presentation, physical, session, data link, transport, network

application, presentation, session, transport, network, data link, physical

presentation, data link, session, transport, network, physical, application

What are characteristic of a WAN?initiate data exchanges

connect LANs in geographically separated locations.

may upload data to servers

listen for requests from servers

What is the proper order of the layers of the OSI model from the highest layer to the lowest layer?

physical, network, application, data link, presentation, session, transport

application, physical, session, transport, network, data link, presentationapplication, presentation, session, transport, network, data link, physical

application, presentation, physical, session, data link, transport, network

application, presentation, transport, session, network, data link, physical

12.Refer to the exhibit. "Cell A" at IP address 10.0.0.34 has established an IP session with "IP Phone 1" at IP address 172.16.1.103. Based upon the graphic, which device type best describes the function of wireless device "Cell A?"

the destination device

an end device

an intermediate device

a media device

Refer to the exhibit. Which networking term describes the data interleaving process represented in the graphic?

piping

PDU

streaming

multiplexing

encapsulation

Refer to the exhibit. Which term correctly identifies the device type that is included in the area B?

source

end

transfer

intermediary

Refer to the exhibit. Which three labels correctly identify the network types for the network segments that are shown? (Choose three.)

Network A LAN; Network A -- WAN ; Network B -- WAN ; Network C -- LAN ;Network B MAN; Network C WAN;