Industrial LCD Monitor Series

Design Verification Test Report

PANEL6172 (Ver. A3)

Rev : A1.0

Release Date : 03/Feb/2005 Test Engineer : Ric Lu

Reviewed : Jason Wu

PREPARE BY: AXIOMTEK CO., LTD

5F. 2, LANE 235, PAO CHIAO ROAD,

HSIH TIEN, TAIPEI HSIEN, TAIWAN, R.O.C.

TEL : 886-2-29174550

FAX: 886-2-29147454

Table of Contents

RELEASE HISTORY..............................................................................................................................1

SUMMARY OF DVT RESULTS ...........................................................................................................2

CHAPTER 1 FUNCTION TESTING ...................................................................................................1

I. BASIC FUNCTION......................................................................................................................................1 II. OSD CONTROL FUNCTION.......................................................................................................................1

CHAPTER 2 VIDEO CHIPSET COMPATIBILITY TESTING .......................................................3

CHAPTER 3 TOUCHSCREEN COMPATIBILITY TESTING .......................................................4

I. CPU CARD & MAINBOARD COMPATIBILITY TEST..................................................................................4 II. OS(OPERATING SYSTEM) COMPATIBILITY TEST.....................................................................................5

CHAPTER 4 RELIABILITY ................................................................................................................6

I. OPERATING TEMPERATURE AND HUMIDITY TEST...................................................................................6 II. TEMPERATURE/THERMAL PROFILE TEST..............................................................................................10

CHAPTER 5 VIBRATION TESTING ...............................................................................................12

I. EUT TEST ....................................................................................................................................................13 II. TEST EQUIPMENT .......................................................................................................................................13 III. TEST CONDITION.......................................................................................................................................13 IV. TEST CRITERIA .........................................................................................................................................14 V. TEST RESULT..............................................................................................................................................14

CHAPTER 6 DROP TESTING ...........................................................................................................17

I. EUT TEST ....................................................................................................................................................17 II. TEST EQUIPMENT .......................................................................................................................................17 III. TEST STANDARD & METHOD....................................................................................................................17 IV. PACKING CONDITION................................................................................................................................17 V. DROPPING CONDITION ...............................................................................................................................17 VI. TEST CRITERIA .........................................................................................................................................18 VII. TEST RESULT...........................................................................................................................................18

APPENDIX1：APPROVDE PROBLEM SUMMARY .......................................................................1

Release History

Report Version : A1.0 1. New product(First Edition)

Test Report

P6172 Ver. A3 2

Summary Of DVT Results

Test Item Description Test Result

Function testing PASS

Video Chipset Compatibility testing PASS

TouchScreen Compatibilty testing PASS

Reliability Include

(1).Temp/Humidity test

(2).Temp/Thermal measure

PASS

Vibration test PASS

Drop test PASS

Note:Product meeting the DVT requirement should not have any “Fatal” or “Serious” problem

remaining opened.

Test Report

P6172 Ver. A3 1

CHAPTER 1 Function Testing

I. Basic Function

NUM Approve Item Test Result

PASS FAIL N/A Remark

1 DC-IN CON(+12V)

2 VGA-IN(D-Sub 15Pin)

3 Power LED

4 Power Switch

5 Touch Screen (D-Sub 9Pin)

II. OSD Control Function

A. OSD Control Button

NUM Approve Item Test Result

PASS FAIL N/A Remark

1 Menu Button

2 SEL+Button

3 SEL-Button

4 Menu Exit B.Monitor Control Function

NUM Approve Item Test Result

PASS FAIL N/A Remark

1 RRIGHTNESS

2 CONTRAST

3 PHASE

4 CLOCK

5 H-POSITION

6 V-POSITION

7 COLOR TEMPERATURE

8 LANGUAGE

Test Report

P6172 Ver. A3 2

9 OSD DURATION

10 RESET C.COLOR TEMPERATURE

NUM Approve Item Test Result

PASS FAIL N/A Remark

1 65000°K

2 7500°K

3 9300°K

4 R：50

5 G：50

6 B：50

D.LANGUAGE

NUM Approve Item Test Result

PASS FAIL N/A Remark

1 ENGLISH

2 FRANCAIS

3 DEUTSCH

4 ESPANOL

5 ITALIANO

6 Traditional Chinese

7 Simple Chinese

8 Japanese

Test Report

P6172 Ver. A3 3

CHAPTER 2 Video Chipset Compatibility Testing

Vender Chipset Chip part NumberTest Result

PASS FAIL N/A Remark

C&T 69000 SBC82630

SMI SM712G4 SBC82400

Rage XL SBC81871 ATI

MobilityRadeon M6 SBC81821

NS GX1(Integrated) SBC84510

815E(Integrated) SBC8168

845GV SBC81822

855GM SBC83810

855GM SBC81870

865G SBC81826

Intel

865G SBC81827

Twister SBC81613

Twister SBC82610

Twister SBC82631

S3

Twister SBC83675

AXIOMTEK

VIA VT8601T SBC81610

ELSA NVIDLA Geforce2 MX-400

GIGABYTE SIS SIS 651 GA-8S1MLH

ASUS Intel 815E(Integrated) CUSL2 Note：All models are tested under Windows XP pro or DOS (QA+ 5.64) A. Start OS，open windows，move windows，shutdown windows B. Test all Resolution

Test Report

P6172 Ver. A3 4

CHAPTER 3 Touchscreen Compatibility Testing

I. CPU Card & Mainboard Compatibility Test

Vender Model Test Result

PASS FAIL N/A Remark

SBC82630

SBC81871

SBC81821

SBC84510

SBC8168

SBC81822

SBC83810

SBC81870

SBC81826

SBC81827

SBC81613

SBC82610

SBC82631

SBC83675

AXIOMTEK

SBC81610

CUSL2

P4S8X

ASUS

P4B-533

EPX 8RDA+

GIGAByte GA-8SIMLH

VIA P4PB Note：All models are tested under Windows XP pro

Test Report

P6172 Ver. A3 5

II. OS(Operating System) Compatibility Test

O.S Version Result Status

MS-Windows98-SE 4.10.2222 PASS Function

MS-Windows Me 4.90.300 PASS Function

Ms-Windows NT V4.01(SP6A) PASS Function

Ms-Windows

Professional 2000

5.00.2195(SP4) PASS Function

Ms-Windows-XP

Professional

2002 (SP2) PASS Function

Ms-Windows-Server

2003 Enterprise

2003 PASS Function

Red Hat Linux V.9.0 N/A

Test Report

P6172 Ver. A3 6

CHAPTER 4 Reliability

I. Operating Temperature and Humidity Test

System Configuration:

Item Description Item Description

Model P6172 Ver. A3 System Board

SBC83810 Rev. A2

DRAM Transcend 256MB DDR 333 (SAMSUNG K4H560838D-TCB3)

System BIOS

A12.1F.0

HDD Seagate ST340014A (40GB) Keyboard ACER 101 key

Mouse Logitech M-CAA43 Power

Supply

Seasonic SS-300FS

Test Equipment

Temperature & Humidity Chamber

KING SON INSTRUMENT TECH Co., LTD

Model：THS-D4C-150

S/N：2361

Date of Calibration：07/July/2004

Test Ambience Temperature：19℃ ~ 27℃

Humidity：54 ~ 64 % (RH)

Test Condition

Condition (1)： Temperature：-5℃ ~ 45℃ Humidity：40% (RH) Condition (2)：Temperature：40℃ Humidity：90% (RH)

Run HCT 10.0 under Windows XP pro

Test Report

P6172 Ver. A3 7

Condition (1)

Condition (2)

Number of Cycle

Temperature

-5℃

45℃

Time

1 Hr

11Hr

Humidity

10%RH

40%RH 1Hr

No Humidity

/ /

Time

25℃

1Hr

11Hr

Temperature

40℃

Time

1 Hr

11Hr

Humidity

10%RH

90%RH 1Hr 5Hr

1Hr5Hr Time

25℃

1Hr

11Hr

Test Report

P6172 Ver. A3 8

P6172 (Ver. A3) with Elo Touch Screen： Condition (1)：2 cycles (Total Time:48 hours)

Condition (2)：2 cycles (Total Time:48 hours) Test Criteria

During and after the test: 1. Electrical Function: (1) The system must function normal 2.Appearance and mechanical function: (1)No mold speckle. (2)No unclear letter,broken line. (3)No letters or symbols on cabinet are missing (4)No stiffness or squeak for buttons when pressed (5)No warp or rust for metal parts

Test Result

■ PASS Electrical function and appearance&mechanical function were normal.:.

□ FAIL : __________________________________________________________

Figure 4-1: P6172 (Ver. A3) Operating Temp/Humidity test

Test Report

P6172 Ver. A3 9

Figure 4-2: P6172 (Ver. A3) Operating Temp/Humidity test

Test Report

P6172 Ver. A3 10

II. Temperature/Thermal profile Test

System Configuration

Item Description Item Description

Model P6172 Ver. A3 System Board

SBC83810 Rev. A2

DRAM Transcend 256MB DDR 333 (SAMSUNG K4H560838D-

TCB3)

System BIOS A12.1F.0

HDD Seagate ST340014A (40GB) Keyboard ACER 101 key

Mouse Logitech M-CAA43 Power

Supply

Seasonic SS-300FS

Test Equipment:

Temperature & Humidity Chamber

KING SON INSTRUMENT TECH Co., LTD

Model：THS-D4C-150

S/N：2361

Date of Calibration：07/July/2004

Temperature Record

YOKOGAWA Model:UR1800 Date of Calibration： 19/Feb/2004

Test Condition: Chamber Temp：40℃ Test program:Speedy under Windos XP pro Time：24 hrs. Dynamic Burn-In

Test Criteria The measured temperature for each point must meet the components spec.

Test Report

P6172 Ver. A3 11

Test Result:

Item Temperature(40℃)

Air temp for L1 (A / D board) point # 01 61.8

Tcase for C2 (A / D board) 68.9

Tcase for C3 (A / D board) 63.3

Tcase for U2 (APL1084)(A / D board) 67.0

Tcase for Novatek NT68521EF (A / D board) (Add Heat sink)

78.7

Tcase for Novatek WT68F63L (A / D board) 64.2

Tcase for point # 02 46.0

Tcase for Q4 (Inverter) 71.0

Tcase for Q7 (Inverter) 72.1

Tcase for Adapter 48

Tcase for 2J46 (Touch controller) 48.8

Air temp for point # 03 50.8

Air temp for point # 04 46.4

Tcase for point # 05 61.0

Air temp for point # 06 68.0

Air temp for point #07 42.7

Air temp for point #08 43.7 ■ PASS: The PANEL6172 Ver. A3 meets the profile test

Test Report

12

Point #08

Point #02

Point #05

Point #01

Point #06

P

Figure 4-3 : P6172 Ver. A3 Interior view & Measure point

Figure 4-4 : Temperature / Thermal profile test

CHAPTER 5 Vibration Testing

Point #04

Point #03

Point #07

6172 Ver. A3

Test Report

P6172 Ver. A3 13

I. EUT Test

Model: P6172 Ver. A3 with ELO Touch Screen

II. Test Equipment

Vibration Simulator System

KING DESIGN Co., LTD

Model: KD-9363EM-300F2K-30N80

S/N: 9Y103059387

Date of Calibration: 19/July/2004

III. Test Condition

Vibration Mode: Random Vibration PSD(Power spectral density) break point :

Frequency(Hz) PSD Level (G2/Hz) 5 0.016

200 0.016 500 0.00258

Overall Level Grms : 2.25 Grms Direction: X, Y, Z Axis Test Time: 1 hour for each Axis

5Hz 200Hz

0.016

500Hz

PSD Level(G2/Hz)

Frequency Herztz

0.00258

-6dB/Oct

Overall Level Grms :2.25 Grms

Test Report

P6172 Ver. A3 14

Front Panel

X axis

Z axis

Y axis

Top

IV. Test Criteria

After the test： 1. Electrical Function：

Test all function and boot to OS (Windows XP professional) 2. Appearance and mechanical function：

(1) The EUT should not suffer permanent deformation or fracture. (2) No fixed part or assembly shall be loosening (3) No moving or movable part of an assembly should become free or sluggish in the testing

process (4) No movable part should shift in setting ,position or adjustment.

V. Test Result

■PASS: Electrical function and appearance&mechanical function were normal.

□FAIL :

Test Report

P6172 Ver. A3 15

Figure 5-1: P6172 Ver. A3 Package Vibration test for Y axis

Figure 5-2: P6172 Ver. A3 Package Vibration test for X axis

Test Report

P6172 Ver. A3 16

Figure 5-3: P6172 Ver. A3 Package Vibraiton test for Z axis

Test Report

P6172 Ver. A3 17

CHAPTER 6 Drop Testing

I. EUT Test

Model: P6172 Ver.A3 with ELO Touch Screen

II. Test Equipment

Drop Simulator System

KING DESIGN Co., LTD

Model: KD128

S/N: 9V103059487

III. Test Standard & Method

Federal Standard 101C Method 5007.1 Testing procedure B&C

IV. Packing Condition

Weight: 10.93Kg

Dimension: 61cm x 56 cm x 21 cm

V. Dropping Condition

Height: 76cm

Dropping direction: 10 directions (1 corner, 3 edges, 6 faces)

Test Report

P6172 Ver. A3 18

1: Top 6: Far end

2: Right side

3: Buttom5: Near end

4: Left side

Packaging drop sequence of the total 10 times dropping test:

1. The 2-5-3Corner 6. The Right side face

2. The 2-3 Edge 7. The Bottom face

3. The 2-5 Edge 8. The Top face

4. The 3-5 Edge 9. The Near end face

5. The Left side face 10. The Far end face

VI. Test Criteria

After the test: 1. Electrical Function:Test all function 2.Appearance and mechanical function: (1) No scratch. (2) No dent (3) No crack (4) No mold speckle. (5) No warp for metal parts (6) No slack(e.g. screw loose (7) No fixed part or assembly shall be loosening (8) No moving or movable part of an assembly should become free or sluggish in the testing process (9) No movable part should shift in setting ,position or adjustment. (10) No severe cracks to cushion (11) No severe damage to carton box

VII. Test Result

■PASS: Electrical function and appearance&mechanical function were normal.

□FAIL :

Test Report

P6172 Ver. A3 19

Figure 6-1: P6172 Ver. A3 Package Dropping Test for the 2-5-3 Corner

Figure 6-2: P6172 Ver. A3 Package Dropping Test for the 2-3 Edge

Test Report

P6172 Ver. A3 20

Figure 6-3: P6172 Ver. A3 Package Droping Test for the buttom face

Test Report

P6172 Ver. A3 1

APPENDIX1：Approvde Problem Summary

Revised Date：27/Jan/2005 Model Name：P6172 Hardware Revision： BIOS Revision： Test Engineer：Ric Lu Problem

ID Problem

level Problem Status

Operating System

Problem Description Problem Solution