Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
Wireless Controlled Door with Key
Solution family: Interior/Exterior door solutionsSolution group: Single-Steel/Wood-Self Closing-Access Control
Description
TESA ASSA ABLOY solution for double-controlDoor by Wall Reader - the reader operates onthe electromechanical lock, which monitors bothsides of the Door.
Motorized lock for Monitoring signals and Firesignals.
Typical application markets
For all kinds of buildings, particularly Hospitals, Hotels, Offices, Institutional Buildings, Stations, Airports and Leisure Spots
SMARTair™ wall reader, Standard: ISO14025, EN 15804 (EPD-ASA-20150166-IBA1-EN)
ABLOY EL 561 electromechanical lock,Standards: EN 179, EN 1125, EN 1634, EN14846
Patented security cylinder, TESA's TX80,Standard: EN 1303
Handle with rose, TESA's SENA series, AISI316 quality, Use Category: 3, Standard:EN1906
ASSA ABLOY Cam-Motion® DC 500 doorcloser and guide, Standard: EN1154,DDA/CEN PR 15894, EN 15804 (EPD-ASA-20130275-IBC1-EN)
Doorstop
Hardware set
Exterior
Interior
EB1-MT-F-C-ES15_ENSet ID:Version: 1
https://www.tesa.esTESA ASSA ABLOYTel: +34 91 6785565
ASSA ABLOY, the global leader in door opening solutions
SMARTair™ wired wall readers with RFID reader are suitable for automated doors, turnstiles, barriers, elevators or any access in which the locking or blocking element is an automatism. The wall reader incorporates a relay and a control unit which manages both the reader and the relay.
SMARTair™ Wall ReaderPro Wireless Online
Technical data - SMARTair™ Wall reader
Traffic volume High
Exterior usage IP55 (Wall reader)Up to 85% humidity-20°C to + 80°C (Wall reader)-10ºC to + 80ºC (Relay board)
Hardware compatibility and installation
To be combined with electromechanical devices to unlock the door (e.g. electric strike plates, electromagnetic locks or escape routes) Cabling needed
Power supply Cabled 12-24 VAC – VDC: powered through relay boardMax power consumption (reader + relay board): 500mA @ 12V / 250mA @ 24V
Multi- authentication
No
Status information
Door position (door sensor not included)Request to exitTamper
Certifications CE (EMC, R&TTE)ROHS, REACH, WEE
RFID technologies
HID iCLASS® MIFARE Classic and UltralightSKIDATADESFire
Upgradability SMARTair™ Wall readers* can be upgradeable from Standalone > Offline / Update On Card > Wireless Online by:· Adding RF module· Firmware upgrade
* R4 circuit required.
MURALMURAL R4
25
77
121
25
77
121
Reader Module · Reading distance: 2-4 cm read/write distance with
standard RFID credentials.· Emergency opening: Jack connection is available
to connect the portable programmer and emergency kit.
· RFID reader with LED (green/red) and sound buzzer for different warning signals: access authorized or denied, etc.
Control Unit· Upgradeable firmware.· Non-volatile memory. The wall reader can be
programmed to operate in 2 modes: · Normal mode: 1500 users and 600 events.· High traffic door: unlimited number of users
filtered into 48 groups (permissions). Stores 1000 events.
· Real-time clock and calendar: · 14 time zones with 5 time periods (week days
and holidays selectable).· State tables: configure 20 changes of operating
modes in a door per day (switch door from lock to unlock).
· Yearly calendar: is updated every month automatically by the wireless system.
· Automatic DST: Daylight Saving Time change. Updated with calendar.
· Maintains clock/calendar for 96h without power supply (internal batttery shall be previously charged within 1 day).
· Operating modes:· Standard: Default operating mode. No
access until valid credential presented, then allows to open the door for 4-10 seconds (configurable).
· Standard ADA: Standard with double opening time.
· Passage mode: door is always in open mode (configured by time zones or by authorized user after double badging).
· Double user: Two valid credentials needed to open de door.
· First user: door in standard mode until first valid user enters, then will remain in passage mode (until closed by authorized user or automatically by time zone, state tables).
RF Module · 868MHz or 915MHz selectable in field.· 30 configurable channels:
· From 868,00 to 875,25 in steps of 0,25Mhz each channel.
· From 915,00 to 922,25 in steps of 0,25Mhz each channel.
· Auto-link with communication Hubs (easy setup).· Upgradeable firmware.
Electronic Technical Characteristics
LECTOR MURAL R4
The relay board is the ideal complement for wall readers when it is necessary to manage an electrically controlled locking element from a single point, deciding for each user which elements must be activated. Encrypted communication between reader & relay board, no manipulation on the wiring between these devices can open the door. · Box & mounting:
· Relay board is supplied in a box that allows surface mounting.
· The electric board can be mounted in DIN rails (DIN rail enclosure not included). Tamper switch must be overridden or added separately.
· The two relays SMARTair™ board is a new generation product with following connections:
· Connector for reader.· Power supply connector.· Door position (sensor not included): Intrusion
or door left open will be reported. · Push Button: Request to exit.· Tamper alarm against relay board
manipulation: tamper included in the board.· 2 output relays:
· Relay 1 commands the electromechanical lock (not included).
· Relay 2 can be used for other purposes. This relay functionality is configured by software or the dip switch on the board.
· Configuration Dip switch. It can be configured from the Management Software of by this Dip.
· Other type of relay boards available for wall readers, can be acquired as spare part:
· Simple 1 relay board with reduced size.· 8 output relay board: typically used in
elevators. 5 of this elevator boards can be connected in serial (40 output relays).
Relay Board
CAJA 2 RELES
36120,5
105,5
SMARTair™ Relay Board.
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.
www.assaabloy.com
Talleres de Escoriaza S.A.U.Barrio de ventas 3520305 IrunGipuzkoa · EspañaT: +34 943 669 100F: +34 943 633 [email protected]/smartair
TESA is the leading Spanish manufacturer and supplier of locking solutions and access control technology for the residential and institutional markets. TESA has a wide and complete range of products including panic exit devices, cylinders, security locks, knobs and handles, door closers, access control solutions with electronic cylinders, electromechanical and electromagnetic solutions and armoured doors. TESA exports to markets such as Latin America, Middle East, Europe, Asia Pacific and the North African countries.
SMARTair™ is a powerful access control system that offers an intelligent, yet simple, step up from keys. SMARTair™ is the cost-effective alternative to a full high-security system. SMARTair™ contactless, smart card technology is easily incorporated into existing systems, with multiple management solutions. No bells, whistles, or wires, just sleek, reliable security.
We
rese
rve
the
right
to m
ake
tech
nica
l mod
ifica
tions
. Ver
sion
: TES
A SM
ARTa
ir™ Te
chni
cal I
nfor
mat
ion
06 2
016
ENG
An ASSA ABLOY Group brand
ABLOY® EL460, EL461, EL560, EL561Europrofile handle controlled locks
ABLOY® Europrofile locks offer intelligent solution for medium traffic doors. Locks can be installed with long plates or roses.
Europrofile handle controlled locks
ABLOY® Europrofile locks offer intelligent solution for medium traffic doors. Locks can be installed with long plates or roses.
Convenience, High security, High durability - Europrofile handle controlled locks
FUNCTIONHandle controlled locks can be set to function as fail locked or as fail unlocked. In the fail locked setting, the lock can be opened by controlled handle when power is on, and it can not be opened by controlled handle, when power is off. In the fail unlocked setting, the electrical function is the opposite.
ABLOY® EL560 and ABLOY® EL460 Only outside handle is electrically controlled. The lock can always be opened by inside handle. Mechanical opening by cylinder is always possible.
ABLOY® EL561 and ABLOY® EL461Both inside and outside handles are electrically controlled. Mechanical opening by cylinder or thumbturn is always possible.
EN STANDARDSEN 179:2008 Exit EN 1125:2008 Panic exitEN 1634-1 Fire resistanceEN 61000-6-1:2007 EMCEN 61000-6-3:2007 EMCEN 12209:2004 Mechanical resistance
LOCAL STANDARDS NEN 5089:1995 SKG, mechanical strength and burglary resistance
GOST-R
STANDARDS
STANDARD DELIVERYStandard delivery includes:
- Lock case with opening direction 4 or 2,4- Fixing screws- Spindle adapters- Lock case manual
Please specify when ordering:- Lock type- Backset- Forend- Strike plate- Split spindle EA288 or EA289 (EL460 and EL560)
OPENING DIRECTIONS (HANDINGS)
ABLOY® DIN
1 Right inwards Left inwards2 Left inwards Right inwards 3 Left outwards Left outwards4 Right outwards Right outwards
4
3
2
1
APPLICATIONSThe locks are recommended to be used in the interior doors of business premises, public buildings, hospitals, educational premises etc. Typical applications are the doors of:
- Offices- Meeting rooms - Storage rooms - Technical maintenance rooms- Consulting rooms- Fire doors (medium traffic)
ABLOY® EL560 and ABLOY® EL561 are used in wooden and metal doors. ABLOY® EL460 and ABLOY® EL461 are used in narrow profile doors. EL560 or EL460 with split spindle is chosen, when exit by handle is needed. EL561 or EL461 is used, when both access and exit are electrically controlled. Handle controlled locks are best suited in medium traffic doors. The locks can be electrically controlled by access control system or by a remote control system such as timer, keypad or push button. The locks can be used both in exit and fire rated doors (EN). The locks are not suitable for use with door automatics.
Also available:
- Microswitch locks EL360 for wooden and metal doors EL260 for narrow profile doors
- Mechanical locks EL160 for wooden and metal doors EL060 for narrow profile doors
Also available lock cases for Swiss cylinder (RZ):- EL562 (split spindle), EL563 (through spindle) for
wooden and metal doors- EL462 (split spindle), EL463 (through spindle) for narrow profile doors- EL362 microswitch lock for wooden and metal doors- EL262 microswitch lock for narrow profile doors- EL162 mechanical lock for wooden and metal doors- EL062 mechanical lock for narrow profile doors
locks can be electrically controlled by access control system or by a remote control system such as timer, keypad or push button. The locks can be used both in exit and fire rated doors (EN). The locks are not suitable for use with door automatics.
Also available:
Also available lock cases for Swiss cylinder (RZ):
Max
45 Max 4
5
Max 7
Operating voltage: 12 – 24 V DC STAB (-10%, +15%)Current: Max. 0.55 A (12V DC), 0.27 A (24V DC) Idle 0.24 A (12V DC), 0.11 A (24V DC)Microswitches: Max. 0.5 A 30 V AC/DC resist, 10 WOperating temperature: -20°C - +60°CBolt throw: 20 mm (deadbolt), 10 mm (double action bolt)Backset: 55, 60, 65, 80, 100 mm (EL560, EL561) 30, 35, 40, 45 mm (EL460, EL461)Forend: 20, 24 mm (EL560, EL561) 24, 28 mm (EL460, EL461)Spindle: 9 mm (8 mm with spindle adapters)Settable functions: Mechanical functions: - Handing of trigger bolt - Electrically controlled side (EL560, EL460) Electrical function: - Fail locked / Fail unlockedMonitoring outputs: Bolt deadlocked Bolt inside the lock case Trigger bolt in Handle used Cylinder used Cable sabotage
TECHNICAL DETAILS
CONTROL PRINCIPLE AND AVAILABLE MONITORING OUTPUTS
CAM ANGLE
*) For further information, please contact Abloy Architectural Hardware.**) Handing must be defined.
DOOR ENVIRONMENT
Wooden and metal doors
Door closer
Door closer
Narrow profile doors
Leave some extra cable on both sides of the lead cover
Leave some extra cable on both sides of the lead cover
Ø 10 mm drilling for cable
Ø 15 mm pipe to lead cable inside the profile
Ø 20 mm pipes to lead cable inside the wall
Ø 20 mm pipes to lead cable inside the wall
CYLINDERS, FITTINGS AND ACCESSORIES (Please order separately)
ABLOY PROTEC
ABLOY DISKLOCK PRO
EUROPROFILE DIN CYLINDERFITTINGS
CABLESSPLIT SPINDLES
LEAD COVERS
STRIKE PLATES
SingleCY321NCY331N CY321D
Double CY322NCY332N
CY322DEA218 (6m)EA219 (10m)
EA288 (8mm)EA289 (9mm)
ABLOY®*)IKON Ruko
BEZAULT others
EA280EA281
EA321**)EA322EA323**)EA324EA325EA326EA327EA328EA329EA330EA331EA332**)
Single with thumbturn
CY323NCY333N CY323D
*) Not microswitch or mechanical locks**) Not mechanical locks
+–
12V DC (-10%) - 24V DC (+15%) STAB. *)**)
LOCKED / OPEN *)**)(POTENTIAL FREE CONTROL)
CYLINDER USEHANDLE DOWN
BOLT OUT
COMMON FOR BOLT OUT
TRIGGER BOLT IN
BOLT INCOMMON FOR BOLT IN /TRIGGER BOLT IN
SABOTAGE LOOP
MO
NIT
OR
ING
OU
TPU
TS **
)COMMON FOR HANDLE DOWN / CYLINDER USE
ABLOY NOVEL
CY321UCY331U
CY322UCY332U
CY323UCY333U
Oy
ABLOYEA321
152
170
20
2 8
ABLOYEA323
232
250
202
25,1
EA321**)
EA326
EA331
EA322
EA327
EA332**)
EA323**)
EA328
EA324
EA329
EA325
EA330
**) Handing must be defined
STRIKE PLATES
3530
022
10
20
6 8
10.5
20.5
9176
10.5
25
24 / 28
3
20
45 / 50 / 55 / 60
30 / 35 / 40 / 45
2521
.5
92 (P
Z) /
94 (R
Z)8.5
5.58
8
152217
4.5 x 2
8 / 9
5.5
101
1239
3032
254
EL560-MITTA-31.08.10
168.
566
.5
38
98/
38
21.5
8
R7
3
20 / 24
35
20
6
8
10
235
22
35
6 x 2
80 / 1005 / 60 / 65 /88 / 93 / 98 / 113 / 133
6 x 2
63
72 (
PZ
) /
74 (
RZ
)16.5
8
57
3515
ABLOY® EL460, EL461
ABLOY® EL560, EL561
DIMENSIONS
5
Abloy OyWahlforssinkatu 20P.O.Box 108FI-80101 JOENSUUFINLANDTel. +358 20 599 2501Fax +358 20 599 2209
www.abloy.com
An ASSA ABLOY Group brand
Abloy Oy is one of the leading manufacturers of locks, locking systems and architectural hardware and the world’s leading developer of products in the field of electromechanical locking technology.
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.
PANIC EXIT DEVICES INSTALLATION ACCORDING TO EN 1125The following locks and push bars are approved to be installed together in an panic exit door to conform EN 1125. The push bars can be installed for example with above mentioned outside fittings (Table EN 179) to conform EN 1125.
The safety features of this product are essential to its compliance with EN 1125. No modification of any kind, other than those described in the installation manual, are permitted.
EN179 and EN1125 standards are comformed, when the above mentioned lock is installed with ABLOY® strike plates listed in this brochure.
This document may not be used in the installation of a lock. Drilling and wiring diagrams and installation instructions are included in the installation manual, which is included in each lock case package.
We reserve the right to make alterations to the products described in this leaflet.
EMERGENCY EXIT DEVICES ACCORDING TO EN 179The following locks and handles are approved to be installed together in an emergency exit door to conform EN 179.
The safety features of this product are essential to its compliance with EN 179. No modification of any kind, other than those described in the installation manual, are permitted.
Profile door locks
EL460
EL260EL060
Wooden and metaldoor locks
EL560
EL360EL160
IKONDO 20.15.02
e.g. S6B3, S6B6
e.g. S6B8
IKONDO 20.15.02
e.g. S326, S426, S4K3
e.g. S4K6
FSBDO 20.03.01, DO 20.03.02
1016, 1023, 1056, 1070, 1080, 1088, 1090, 1117, 1118, 1119, 1137, 1146, 1155, 1160, 1161, 1162, 1177, 1178, 1191, 0612,0616, 0617, 0619, 0625, 0627, 0628, 0646, 0662, 0665, 0680, 0681, 0682, 0688
HEWIDO 20.13.01, DO 20.13.02
111, 111.23, 114.23GK, 131, 132, 111X, 113X, 114X, 161X, 163X, 171X, 112X, 165X, 166X
HEWIDO 30.10
SAPEXDO 20.32.01DO 20.32.02
e.g. 60-00819
SAPEXDO 20.32.01DO 20.32.02
e.g. 60-0419, 60-0319
ABLOY®
DO 20.33.01DO 20.33.02
e.g. ABLOY® INOXI 3-19/013
PZ+BL
ABLOY® INOXI 3-19/013/120 PZ+BL
ABLOY®
DO 20.33.01DO 20.33.02
e.g. ABLOY® INOXI 3-19/012
PZ+BL
ABLOY® INOXI 3-19/012/120 PZ+BL
Profile door locks
EL460, EL260, EL060
EL462, EL262, EL062
Wooden and metaldoor locks
EL560, EL360, EL160
EL562, EL362, EL162
effeffDO 30.04
8000-00-1100 (-), 8000-10-1100 (PZ)
8000-00-1100 (-), 8000-11-1100 (RZ)
effeffDO 30.04
8000-00-1100 (-), 8000-20-1100 (PZ)
8000-00-1100 (-), 8000-21-1100 (RZ)
JPMDO 30.05
NORMA 990000-XX-0A990100-XX-0A990001-XX-0A990101-XX-0A991000-XX-0A991100-XX-0A991001-XX-0A991101-XX-0A
TESADO 30.06
TESADO 30.06
8801
046
2/2
011
200
0 kp
l S
uom
en P
aino
tuot
e, J
oens
uu
UNIVERSAL SERIE19709G9xx
HEWI PS 160XA 400
42 TESA catalogue | Cylinders
High security cylinder TX80
» Type: Patented dimple key with security sensor.
» NO. of rows: 2
» NO. of pins: 8
» Technology: Tumbler regular.
» Permutation level: Grade 6.
» Corrosion resistance: Grade B
» Anti pick cylinder lock (High resistance.)
» Bump proof system.
» Drill protection grade 2.
» Lifespan: 100,000 test cycles.
» Key copies protected with security card.
» Clutch of double security.
» 5 patented keys made of nickel silver.
» Conform to EN-1303 regulation.
» Master key systems: High capability using side pins and multi
profile key ways.
Options
» Finishes: Brass / Nickel.
» Cam: DIN R15 and R13.
» Formats available: Key different, mater keyed, key alike and
specific codes.
» Wide measurement and profile range.
» Colour points to differentiate master key levels.
Master key systems
The patented character of the system will let the owner control,
in every moment, the key copies thanks to the property card
provided with each cylinder or master key suite.
Tx80 cylinders have been designed according to the highest
quality protection systems. It is a model in constant evolution
that incorporates the most advanced security developments
(bumping, picking…etc). A design thought to offer to the user
the higher security grade in all its extension.
Technical data
Characteristics
Security Masterkeying
In the same way as the main models included in the catalogue,
TX80 is certified according to the European standard regulation.
European standard regulation
» Use TESA lubricant to lengthen the maximum lifespan of the
cylinder.
» TESA recomends to the user of the TX80 to keep the property
card in a safe and secure location. Only by presenting this card,
can one obtain key and cylinder copies.
» For safety reasons, when you install a new cylinder, remember
that once installed, it should not project more than 1mm.
Recommendations
1 6 0 1 0 B 6 0
Key re
sistan
ce
(Grade 0-1
)
Lifesp
an(G
rade 4-6
)
Door m
ass
(Not ap
plie
d in
cylinder)
Fire
resistan
ce(G
rade 0-1
)
Safety of the people
(Not ap
plie
d in
cyliders)
Corrosion and tem
peratu
re
resistan
ce(G
rade 0-A
-B-C
)
Key re
late
d secu
rity
(Grade 1 to 6)
Attac
k re
sistan
ce(G
rade 0 to 2)
*Note; with the shield E700 the attack resistance rise to the level 2.
D
Cylinders | TESA catalogue 43
High security cylinder TX80
Double european. L A B Cam = 15 mm Finish Cam = 15 mm Finish
60 30 30 TX85 30 30 L Brass TX85 30 30 N Nickel
65 30 35 TX85 30 35 L Brass TX85 30 35 N Nickel
70 30 40 TX85 30 40 L Brass TX85 30 40 N Nickel
70 35 35 TX85 35 35 L Brass TX85 35 35 N Nickel
75 30 45 TX85 30 45 L Brass TX85 30 45 N Nickel
75 35 40 TX85 35 40 L Brass TX85 35 40 N Nickel
80 30 50 TX85 30 50 L Brass TX85 30 50 N Nickel
80 35 45 TX85 35 45 L Brass TX85 35 45 N Nickel
80 40 40 TX85 40 40 L Brass TX85 40 40 N Nickel
85 35 50 TX85 35 50 L Brass TX85 35 50 N Nickel
90 30 60 TX85 30 60 L Brass TX85 30 60 N Nickel
90 35 55 TX85 35 55 L Brass TX85 35 55 N Nickel
90 40 50 TX85 40 50 L Brass TX85 40 50 N Nickel
90 45 45 TX85 45 45 L Brass TX85 45 45 N Nickel
100 30 70 TX85 30 70 L Brass TX85 30 70 N Nickel
100 40 60 TX85 40 60 L Brass TX85 40 60 N Nickel
100 50 50 TX85 50 50 L Brass TX85 50 50 N Nickel
110 30 80 TX85 30 80 L Brass TX85 30 80 N Nickel
110 50 60 TX85 50 60 L Brass TX85 50 60 N Nickel
120 30 90 TX85 30 90 L Brass TX85 30 90 N Nickel
120 40 80 TX85 40 80 L Brass TX85 40 80 N Nickel
120 60 60 TX85 60 60 L Brass TX85 60 60 N Nickel
130 30 100 TX85 31 00 L Brass TX85 31 00 N Nickel
140 40 100 TX85 41 00 L Brass TX85 41 00 N Nickel
150 50 100 TX85 51 00 L Brass TX85 51 00 N Nickel
160 60 100 TX85 61 00 L Brass TX85 61 00 N Nickel
Single european L A B Cam = 15 mm Finish Cam = 15 mm Finish
40 30 10 TX85 30 10 L Brass TX85 30 10 N Nickel
45 35 10 TX85 35 10 L Brass TX85 35 10 N Nickel
50 40 10 TX85 40 10 L Brass TX85 40 10 N Nickel
60 50 10 TX85 50 10 L Brass TX85 50 10 N Nickel
70 60 10 TX85 60 10 L Brass TX85 60 10 N Nickel
80 70 10 TX85 70 10 L Brass TX85 70 10 N Nickel
90 80 10 TX85 80 10 L Brass TX85 80 10 N Nickel
100 90 10 TX85 90 10 L Brass TX85 90 10 N Nickel
Knob european L A B Cam = 15 mm Finish Cam = 15 mm Finish
60 30 30 TX8B 30 30 L Brass TX8B 30 30 N Nickel
65 30 35 TX8B 30 35 L Brass TX8B 30 35 N Nickel
70 35 35 TX8B 35 35 L Brass TX8B 35 35 N Nickel
70 40 30 TX8B 40 30 L Brass TX8B 40 30 N Nickel
80 30 50 TX8B 30 50 L Brass TX8B 30 50 N Nickel
80 40 40 TX8B 40 40 L Brass TX8B 40 40 N Nickel
85 35 50 TX8B 35 50 L Brass TX8B 35 50 N Nickel
90 30 30 TX8BTB3030L Latón TX8BTB3030N Níquel
90 35 30 TX8BTB3530L Latón TX8BTB3530N Níquel
European with assistant function L A B Cam = 15 mm Finish Cam = 15 mm Finish
60 30 30 TX85 30 30 LLIM Brass TX85 30 30 NLIM Nickel
70 30 40 TX85 30 40 LLIM Brass TX85 30 40 NLIM Nickel
70 35 35 TX85 35 35 LLIM Brass TX85 35 35 NLIM Nickel
80 40 40 TX85 40 40 LLIM Brass TX85 40 40 NLIM Nickel
90 40 50 TX85 40 50 LLIM Brass TX85 40 50 NLIM Nickel
90 45 45 TX85 45 45 LLIM Brass TX85 45 45 NLIM Nickel
European profile
Patented
12 units.
These cylinders are provided with 4 owner keys and one for the assistant.
Both side A and B includes the function.
* To process “master keyed” and “cylinders alike” orders add either AM or KA in each part number, respectively.
** The butler system lets operate with the key from the outside even if knob is blocked. Is a solution thought for schools, geriatrics..
etc.
SYST EM* *
BUTL ER
BT
A B
L
10 AL
A B
L
L
A B
22 TESA catalogue | Handles
Institutional stainless AISI 316L handle
Sena AISI 316LThe pack with a rosette includes
» A set of handles with an internal plate and a cover, 1 8x105
mm spindle, 2 recoil springs, 4 coach screws, 2 bolts and an
Allen key.
The pack with a long plate includes
» A set of handles with an internal plate and a cover, a 8x105
mm spindle, 2 recoil springs, 4 coach screws, 2 bolts and an
Allen key.
» Rectangular plate also available
The pack with a squared plate includes
» A set of handles with a 1’5 mm-thick internal plate and a
cover, a 8x105 mm spindle, 2 recoil springs, 5 floating through
bolts, 5 screws, 2 bolts and an Allen key.
Functions
» Entrance: keyhole at 85, 72, 70 and 47 mm.
» Privacy: deadbolt at 85, 72, 70 and 47 mm.
» Passage.
Rosette Product code Finishes
Rosette MS5R800 IS16 (includes through bolts)
Rosette MMTFR800 IS16 1/2 Fixed knob + CUADRAE
Rosette MSTFR800IS16 1/2 Fixed knob + CUADRAE
+ 1/2 Sena
Rosette MTF5R800IS16 Double Fixed knob
+ 2 CUADRAE
Long plate Product code Finishes
Passage MS5L800 IS16 (no through bolts included)
Rectangular MS5LR800 IS16 (no through bolts included)
Cylinder at 47 mm MS0L847 IS16 (no through bolts included)
Cylinder at 70 mm MS0L870 IS16 (no through bolts included)
Cylinder at 72 mm MS0L872 IS16 (no through bolts included)
Cylinder at 85 mm MS0L885 IS16 (no through bolts included)
Deadbolt at 47 mm MSEL847 IS16 (no through bolts included)
Deadbolt at 70 mm MSEL870 IS16 (no through bolts included)
Deadbolt at72 mm MSEL872 IS16 (no through bolts included)
Deadbolt at 85 mm MSEL885 IS16 (no through bolts included)
Square plate Product code Finishes
Pasagge MS5C800 IS16 (includes through bolts)
Cylinder at 47 mm MS0C847 IS16 (includes through bolts)
Cylinder at 70 mm MS0C870 IS16 (includes through bolts)
Cylinder at 72 mm MS0C872 IS16 (includes through bolts)
Cylinder at 85 mm MS0C885 IS16 (includes through bolts)
Deadbolt at 47 mm MS3C847 IS16 (includes through bolts)
Deadbolt at 70 mm MS3C870 IS16 (includes through bolts)
Deadbolt at 72 mm MS3C872 IS16 (includes through bolts)
Deadbolt at 85 mm MS3C885 IS16 (includes through bolts)
215
45 8
62
55
135
180 1,5
G
Handles | TESA catalogue 31
Institutional stainless AISI 316L handlecomplements
Key holes
Blank
The pack includes:
» A set with support pieces and
covers.
» 4 coach screws.
Finish
» IS16
The pack includes:
» A set with support pieces and
covers.
» 4 coach screws.
Finish
» IS16
Product code Finish
MB0RBOM IS16
Product code Finish
MB0R000 IS16
Thumb turnsThe pack includes:
» A set with support pieces and
covers.
» 4 coach screws.
Finish
» IS16
Product code Finish
MB0REME IS16
76 Door closers
Cam-Motion® guide rail system
DC500
88,5 23,5 100
270
485
505
43
38
10
3
57
64
39 ( 32)
23
(20
,5)
ASSA ABLOY DC500
· Door closer with Cam-Motion® technology and
height-adjustable guide rail G195 or standard guide
rail G193
· Fulfils barrier-free building requirements (DDA / CEN
TR 15894)
· Certified in compliance with EN 1154, size 1-4
· Suitable for fire and smoke protection doors
· For single action doors up to 1100 mm wide
· Can be used in four installation types: hinge and
non-hinge sides in standard and frame installation
Characteristics DC500
· Can be used with integrated concealed mounting
plate, suitable for fire and smoke protection doors
· Can be used for left and right-handed doors
· Axis continuously height adjustable up to 14 mm
· Closing speed, latching speed and backcheck adjus-
table via front facing regulating valves
· Thermodynamic valves for consistent performance
· Variable adjustable closing force
· Opening angle up to 170°
· Effective backcheck and latching speed range adjus-
table
· Large range of applications
· Standard colours: silver EV1; white, similar to
RAL9016; brown, similar to RAL8014; black, similar
to RAL9005, stainless steel
· Customised finishes available on request
Characteristics for guide rail G195
· Height-adjustable by 2 mm for tolerance
· Concealed fastening screws
· Installation dimensions: see diagram
Characteristics of standard guide rail G193
· Without protective cover
· Visible fastening screws
· Installation dimensions: see diagram (dimensions in
brackets)
13
8 41 1
13 41162-CPD-0629 EN 1154:1996+A1:2002
Abloy OYPO Box 10880101 Joensuu,Finland
Door closer with Cam-Motion® technology and guide
rail
77 Door closers
Cam-Motion® guide rail system
DC500
Project planners - Extensive range of uses: Fire and smoke protection doors as well as standard doors- Modern design- Compact design- Fulfils barrier-free building requirements (DDA / CEN TR 15894)- Same dimensions and design with and without mounting plate
Builders - One drilling template overall- Adjustable to nearly all door and frame types- Quick and easy installation- Quickly and easily adjustable- Suitable for left and right handed doors for standard and frame mounting on hinge and non-hinge side
Trade - Reduced inventory costs due to modular product range- One single product suitable for a large variety of mounting positions- Complementary accessories available for the whole product range
User - Largely unaffected by temperature fluctuations thanks to thermodynamic valves- Easier door opening and improved accessibility due to reapidly decreasing torque
Our service for you: here
you can see the indivi-
dual advantages of our
door closer models for
your respective field of
business.
You can find the
complete specifica-
tions on the Internet
at: www.assaabloy.de,
under „Service“ in the
support section.
The advantages at a glance
Technical attributes
Customer segment Advantages
Specifications for DC500
ASSA ABLOY Door Closer DC500 with Cam-Motion®
technology and guide rail in compliance with EN 1154
· Closing power continuously adjustable, EN size 1-4,
for doors up to 1100 mm wide
· Closing speed, latching speed and backcheck conti-
nuously adjustable
· Can be used with integrated concealed mounting
plate, suitable for fire and smoke protection doors
· CE approved
· 14 mm height adjustable arm system for ease of
fitting
· Standard and frame mounting on hinge and non-
hinge side of the door
· Suitable for left and right handed doors
Accessories:
Standard guide rail
G193
Height-adjustable gui-
de rail G195
Mounting plate A120
Mounting plate A130
for guide rail G193
and G195
Angle bracket A104
for guide rail G193
Mechanical opening
damper A153
Mechanical hold-open
device A152 (not for
fire and smoke pro-
tection doors)
Glass door shoe A166
Colour:
Silver EV1
White, similar to
RAL9016
Brown, similar to
RAL8014
Black, similar to
RAL9005
Stainless steel
Customised finish
Variable adjustable closing force EN 1-4
Door width up to 1100 mm
Fire and smoke protection yes
DIN door swing directions left / right handed
Standard and frame installation yes
Closing speed Variable between 170°-10°
Latching speed Variable between 10°-0°
Backcheck Variable above 75°
Opening angle hinge side ca. 170°
Opening angle non-hinge side ca. 120°
Weight 2.7 kg
Height 64 mm
Depth 57 mm
Width 270 mm
Certified in compliance with EN 1154
CE marking for building products yes
Technical attributes
78 Door closers
Cam-Motion® guide rail system
DC500
Dimensional drawings
371,5
605
10
3
68
,5
Space required on doors
for standard installation
on hinge side
Left handed shown in diagramRight handed is the re-verse
13max.
15
43
38
213,5
43
485110
100
15
38
Installation dimensions
for direct standard
mounting on hinge side
Left handed shown in diagramRight handed is the re-verse
110 485
142 160
16
4265
Installation dimensions
with mounting plate for
standard mounting on
hinge side
In compliance with EN 1154, Supplement 1, or for doors where direct mounting is not possible. Left handed shown in diagramRight handed is the re-verse
43
485110
100
11
38
213,5Installation dimensions
for direct frame moun-
ting on hinge side
Closer on hinge side of door frame.Left handed shown in diagramRight handed is the re-verse
110 485
142 160
65
16
11
Installation dimensions
with mounting plate for
frame mounting on hinge
side
Closer on hinge side of door frame. For doors where direct mounting is not possible.Left handed shown in diagramRight handed is the re-verse
79 Door closers
Cam-Motion® guide rail system
DC500
Dimensional drawings
110 485
100176,5
113
8
43
Installation dimensions
for direct standard
mounting non hinge side
Right handed door
shown in diagram
Left handed door is the
reverse
16
105 160
110 485
1165
Installation dimensions
with mounting plate for
standard mounting non
hinge side
For doors where direct
mounting is not possible
Right handed door
shown in diagram
Left handed door is the
reverse
110 485
100
43
213,5
1538
Installation dimensions
when mounted directly
onto the frame non-
hinge side
Closer on non-hinge side
of door frame
Right handed door
shown in diagram
Left handed door is the
reverse
16 42
142 160
65
110 485
Installation dimensions
with mounting plate for
frame mounting non-
hinge side
Closer on non-hinge side
of door frame. For doors
where direct mounting is
not possible.
Right handed door
shown in diagram
Left handed door is the
reverse
80 Door closers
Cam-Motion® guide rail system
DC500
Accessories
ISO 15065-5
7
6,5
16
33
,51
6183
56
160
Mounting plate A120
For mounting with dril-
ling template acc. to EN
1154 Supplement 1 and
for universal use
42
16
65
10
505
485
71
3
30
Mounting plate A130
For guide rail G193 and
G195
42
16
52
71
3
65
( )
10 485
505
242,5 242,5
15
23
9
Angle bracket A104
Only for standard guide
rail G193
65
8
15
23
81
16
R4
A
A
16020,8
210
6,5
33
,5 16
16
56
Replacement plate A124
For renovation applica-
tions
Ø
Ø
6,5
90
°
11
4
A-A
270
67
Glass door shoe A166
For mounting the door
closer on the all-glass
door leaf.
10max.
81 Door closers
Cam-Motion® guide rail system
DC500
Accessories and order placement information
Stainless steel full cover
For DC500 and DC700
Stainless steel design cover
For DC500 and DC700
Hold-open device A152
Mechanical hold-open device for doors which sometimes need to be secured in the
open position.
Simple fitting into guide rail G193 and G195.
Hold-open angle max. 130°
Adjustable hold-open force
Not approved for use on fire and smoke protection doors.
Opening damper A153
Helps to prevent the door and door handle from hitting a return wall.
Simple fitting into guide rail.
Opening damper continuously adjustable up to an opening angle of max. 130°.
Does not replace a door stop.
Description Order no.
DC500, EN size 1-4, silver EV1
DC500, EN size 1-4, white, similar to RAL9016
DC500, EN size 1-4, brown, similar to RAL8014
DC500, EN size 1-4, black, similar to RAL9005
DC500, EN size 1-4, stainless steel, ASSA ABLOY design
DC500, EN size 1-4, stainless steel full cover
DC500, EN size 1-4, customised finish
Guide rail G193, silver EV1
Guide rail G193, white, similar to RAL9016
Guide rail G193, brown, similar to RAL8014
Guide rail G193, black, similar to RAL9005
Guide rail G195, silver EV1
Guide rail G195, white, similar to RAL9016
Guide rail G195, brown, similar to RAL8014
Guide rail G195, black, similar to RAL9005
Guide rail G195, stainless steel
Description Order no.
Guide rail G195, bespoke finish
Mounting plate A120, galvanised
Replacement�plate�A124,�galvanised
Mounting plate A130, silver EV1
Mounting plate A130, white, similar to RAL9016
Mounting plate A130, brown, similar to RAL8014
Mounting plate A130, black, similar to RAL9005
Mounting plate A130, customised finish
Mounting plate A136, non-hinge�side,�for�Gui-de�Rail�G193�and�G195,�40�mm,�silver�EV1
Glass door shoe A166, silver EV1
Angle bracket A104, silver EV1
Angle bracket A104, RAL9016 white
Angle bracket A104, brown, similar to RAL8014
Angle bracket A104, black, similar to RAL9005
Hold-open device A152
Opening damper A153
42 TESA catalogue | Handles
Accessories - Institutional stainless AISI 304Stopper
The pack includes:
» Rubber plug with fixing screws.
Finish
» IS304
The pack includes:
» Rubber plug with fixing screws.
Finish
» IS304
The pack includes:
» Rubber plug with fixing screws.
Finish
» IS304
The pack includes:
» Rubber plug with fixing screws.
Finish
» IS304
Product code Finishes
TOPINOX45IS IS-
Product code Finishes
TOPINOX4320IS IS-
Product code Finishes
TOPERCHAIS IS-
Product code Finishes
TOPINOXRIS IS-
Half-dome door stopper ø45
Wall door stopper Coath hook w/ rubber buffer
Full-dome door stopper
30
45
30
615
16
46 19
84
7
11
66
6
20
9.1X 90°
19
50
24
13.7
20
35
16
3.0
68 9
ASSA ABLOY, the global leader in door opening solutions
Communication HubPro Wireless Online
· Communication hubs are the nexus between the management software server and the Pro Wireless Online devices, which allows:
· Automatic access plan modifications.· Real- time audit trail.· Inmediate cancellation of lost credentials.· Remote opening.
· Bi-directional communication allows for direct control of doors, and active warnings with maximum flexibility.
· SMARTair™ Hubs do not require their own wiring as they are connected to the existing TCP/IP network.
· PoE connection allows the Hubs to be powered directly from the communications network.
· Each Hub can manage up to 30 access points (doors, barriers, lifts, etc.) at a distance of 30m, which again positively impacts the cost effectiveness of the system.
· Certificates: · CE (EMC, R&TTE).· ROHS, REACH, WEE.
140
120
60
59.9970
164.9
144.9
36
Electronic Technical Features Installation recommendationMain control· Encrypted wireless radio frequency
communication.· Secure end-to-end encryption:
· TCP/IP SSL encrypted communication between server & communication Hubs.
· 868 MHz or 915 MHz radio communication with door devices, with AES128 encryption.
· Power, 2 ways:· 12-24 DC: max consumption 1A @12DC (0,5A
@24 VDC).· PoE: directly from the network cable (switches
must also be PoE). IEEE802.3af compliant.· Ethernet communication: RJ45 connector for TCP/
IP. UTP CAT5 cable recommended. · Upgradeable firmware.· Non-volatile event memory· Autolink of wireless devices with the Hub to allow
a quick and easy set up· Manual link that allows to assign and/or reassign
wireless devices to the various Hubs with no need of being physically at the door.
RF module· 868MHz or 915MHz selectable in field.· 30 configurable channels:
· From 868,00 to 875,25 in steps of 0,25Mhz each channel.
· From 915,00 to 922,25 in steps of 0,25Mhz each channel.
Mechanical Technical features· ABS plastic.· RAL 7035· Dimensiones: 144,9 (L) x 164,9 (W) x 36 (D) mm.
Environmental performance· Hubs shall be installed in the inside part of the
building. · Temperature range: 0ºC - 60°C.· Humidity: 10-90%. Vapour and humidity may
affect wireless signal.
Recommended Communication Hub position The following picture shows the recommended location where the SMARTair™ communication Hub should be installed. It should be on the wall, halfway up the ground in a vertical position, and the RF module (antenna) oriented in horizontal.
Other recommendations to install the Communication Hub correctly:· Do not install a Hub in outer walls. · Do not install a Hub near metallic elements, such
as grids or structure cables.· Avoid any mirrors between the Hubs and the
wireless devices. Mirrors reflect the signal and do not cross them.
· Avoid installing Hubs where there is a possibility to have more than two walls between it and the wireless devices to communicate with.
· Avoid having microwaves within a distance of 5 meters to the Hub.
· When installing a Hub consider the RF modules of the devices are in the inside part of the door and in the wall readers these are in the outside part.
· Do not install any Hub in metallic doors when possible.
Antenna