TERMINAL BLOCKS - CONTA-CLIP - Homecontaclipinc.com/fileadmin/_migrated/content_uploads/Cat_Conta_Strips_eco__.pdf · 3 CONTA-STRIPS –Without Wire Protector •Flat Base •Colors:

TERMINAL BLOCKS

CONTA-CLIP INC.

CONTA-CLIP, Inc. (732) 564-07052

Electrical Ratings: CSA/US 300V/20A 300V/30A 300V/30AIEC 450V/24A 450V/32A 450V/41A Temperature Rating C (F) -30 to 100°C (-22 to 212°F) -30 to 100°C (-22 to 212°F) -30 to 100°C (-22 to 212°F)Insulating Stripping Length mm (in.) 5.0 (0.20) 6.0 (0.24) 7.0 (0.26) Tightening Torque Nm (lbf.-in.) 0.4 (3.54) 0.5 (4.43) 0.5 (4.43)Screw Hole Diameter mm (in.) 2.8 (0.11) 3.5 (0.14) 3.5 (0.14) Mounting Hole Diameter mm (in.) 2.8 (0.11) 3.2 (0.13) 3.6 (0.14)

CONTA-STRIPS – Without Wire Protector• Flat Base• Colors: Translucent or Black• Side Wire Entry• Housing Material: Polyamide 6• Terminal Body/Screws: Nickel Plated Brass/Galvanized Steel• Temperature Rating: -22 to 212°F

Type/Wire Size mm2 CCIEKB 2.5 mm2 CCIEKB 4.0 mm2 CCIEKB 6.0 mm2

Wire Size AWG AWG 22-12 AWG 22-10 AWG 22-10

Ordering Information Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. No. of Poles Translucent Black Translucent Black Translucent Black

2 55410.0 55410.1 55421.0 55421.1 55432.0 55432.1 3 55411.0 55411.1 55422.0 55422.1 55433.0 55433.1 4 55412.0 55412.1 55423.0 55423.1 55434.0 55434.1 5 55413.0 55413.1 55424.0 55424.1 55435.0 55435.1 6 55414.0 55414.1 55425.0 55425.1 55436.0 55436.1 7 55415.0 55415.1 55426.0 55426.1 55437.0 55437.1 8 55416.0 55416.1 55427.0 55427.1 55438.0 55438.1 9 55417.0 55417.1 55428.0 55428.1 55439.0 55439.1 10 55418.0 55418.1 55429.0 55429.1 55440.0 55440.1 11 55419.0 55419.1 55430.0 55430.1 55441.0 55441.1 12 55420.0 55420.1 55431.0 55431.1 55442.0 55442.1

Width-W Width-W Width-W Width-WNo. of Poles mm (in.) mm (in.) mm (in.)

2 13.5 (0.53) 16.5 (0.65) 16.8 (0.66) 3 21.5 (0.85) 26.5 (1.04) 26.8 (1.06)4 29.5 (1.16) 36.5 (1.44) 36.8 (1.45)5 37.5 (1.48) 46.5 (1.83) 46.8 (1.84)6 45.5 (1.79) 56.5 (2.22) 56.8 (2.24)7 53.5 (2.11) 66.5 (2.62) 66.8 (2.63)8 61.5 (2.42) 76.5 (3.01) 76.8 (3.02) 9 69.5 (2.74) 86.5 (3.41) 86.8 (3.42)10 77.5 (3.05) 96.5 (3.80) 96.8 (3.81)11 85.5 (3.34) 106.5 (4.19) 106.8 (4.20)12 93.5 (3.68) 116.5 (4.59) 116.8 (4.60)

Std.Pk.10010010010050505050505050

Std.Pk.10010010010050505050505050

Std.Pk.10010010010050505050252525

www.contaclipinc.com 3

CONTA-STRIPS – Without Wire Protector• Flat Base• Colors: Translucent or Black• Side Wire Entry• Housing Material: Polyamide 6• Terminal Body/Screws: Nickel Plated Brass/Galvanized Steel• Temperature Rating: -22 to 212°F

Type/Wire Size mm2 CCIEKB 10.0 mm2 CCIEKB 16.0mm2

Wire Size AWG AWG 20-8 AWG 14-6

Ordering Information Cat. No. Cat. No. Cat. No. Cat. No.No. of Poles Translucent Black Translucent Black

2 55445.0 55445.1 55456.0 55456.13 55446.0 55446.1 55457.0 55457.14 55447.0 55447.1 55458.0 55458.15 55448.0 55448.1 55459.0 55459.16 55449.0 55449.1 55460.0 55460.17 55450.0 55450.1 55461.0 55461.18 55451.0 55451.1 55462.0 55462.19 55452.0 55452.1 55463.0 55463.110 55453.0 55453.1 55464.0 55464.111 55454.0 55454.1 55465.0 55465.112 55455.0 55455.1 55466.0 55466.1

Width-W Width-W Width-WNo. of Poles mm (in.) mm (in.)

2 19.75 (0.78) 25.8 (1.02)3 31.75 (1.25) 40.8 (1.61)4 43.75 (1.72) 55.8 (2.20)5 55.75 (2.19) 70.8 (2.79)6 67.75 (2.67) 85.8 (3.38)7 79.75 (3.14) 100.8 (3.97)8 91.75 (3.61) 115.8 (4.56)9 103.75 (4.08) 130.8 (5.15)10 115.75 (4.56) 145.8 (5.74)11 127.75 (5.03) 160.8 (6.33)12 139.75 (5.50) 175.8 (6.92)

Electrical Ratings:CSA/US 300V/50A 300V/55AIEC 450V/57A 450V/76ATemperature Rating C (F) -30 to 100°C (-22 to 212°F) -30 to 100°C (-22 to 212°F)Insulating Stripping Length mm (in.) 7.5 (0.30) 9.5 (0.37)Tightening Torque Nm (lbf.-in.) 0.8 (7.10) 1.2 (10.6)Screw Hole Diameter mm (in.) 3.6 (0.14) 5.1 (0.20)Mounting Hole Diameter mm (in.) 4.3 (0.17) 6.0 (0.24)

Std.Pk.10010010010050505050252525

Std.Pk.5050505025252525101010

CONTA-CLIP, Inc. (732) 564-07054

Electrical Ratings: CSA/US 300V/20A 300V/30A 300V/30AIEC 450V/24A 450V/32A 450V/41ATemperature Rating C (F) -30 to 100°C (-22 to 212°F) -30 to 100°C (-22 to 212°F) -30 to 100°C (-22 to 212°F)Insulating Stripping Length mm (in.) 5.0 (0.20) 6.0 (0.24) 7.0 (0.28)Tightening Torque Nm (lbf.-in.) 0.4 (3.54) 0.5 (4.43) 0.5 (4.43)Screw Hole Diameter mm (in.) 2.8 (0.11) 3.5 (0.14) 3.5 (0.14)Mounting Hole Diameter mm (in.) 2.8 (0.11) 3.2 (0.13) 3.6 (0.14)

Type/Wire Size mm2 CCIEKBWP 2.5 mm2 CCIEKBWP 4.0 mm2 CCIEKBWP 6.0 mm2



2 13.5 (0.53) 16.5 (0.65) 16.8 (0.66) 3 21.5 (0.85) 26.5 (1.04) 26.8 (1.06)4 29.5 (1.16) 36.5 (1.44) 36.8 (1.45)5 37.5 (1.48) 46.5 (1.83) 46.8 (1.84)6 45.5 (1.79) 56.5 (2.22) 56.8 (2.24)7 53.5 (2.11) 66.5 (2.62) 66.8 (2.63)8 61.5 (2.42) 76.5 (3.01) 76.8 (3.02)9 69.5 (2.74) 86.5 (3.41) 86.8 (3.42)10 77.5 (3.05) 96.5 (3.80) 96.8 (3.81)11 85.5 (3.34) 106.5 (4.19) 106.8 (4.20)12 93.5 (3.68) 116.5 (4.59) 116.8 (4.60)

Ordering Information Cat. No. Cat. No. Cat. No.No. of Poles Translucent Translucent Translucent

2 55470.0 55500.0 55520.03 55471.0 55501.0 55521.04 55472.0 55502.0 55522.05 55473.0 55503.0 55523.06 55474.0 55504.0 55524.07 55475.0 55505.0 55525.08 55476.0 55506.0 55526.09 55477.0 55507.0 55527.010 55478.0 55508.0 55528.011 55479.0 55509.0 55529.012 55480.0 55510.0 55530.0

CONTA-STRIPS – With Wire Protector• Flat Base• Color: Translucent • Side Wire Entry• Housing Material: Polyamide 6• Terminal Body/Screws: Nickel Plated Brass/Galvanized Steel• Temperature Rating: -22 to 212°F• Wire Protector: Stainless Steel

WireProtector

Std.Pk.10010010010050505050505050

Std.Pk.10010010010050505050505050

Std.Pk.10010010010050505050252525


Type/Wire Size mm2 CCIEKBWP 10.0 mm2 CCIEKBWP 16.0mm2

Wire Size AWG AWG 20-8 AWG 14-6

Width-W Width-W Width-WNo. of Poles mm (in.) mm (in.)

2 19.75 (0.78) 25.8 (1.02)3 31.75 (1.25) 40.8 (1.61)4 43.75 (1.72) 55.8 (2.20)5 55.75 (2.19) 70.8 (2.79)6 67.75 (2.67) 85.8 (3.38)7 79.75 (3.14) 100.8 (3.97)8 91.75 (3.61) 115.8 (4.56)9 103.75 (4.08) 130.8 (5.15)10 115.75 (4.56) 145.8 (5.74)11 127.75 (5.03) 160.8 (6.33)12 139.75 (5.50) 175.8 (6.92)

Electrical Ratings:CSA/US 300V/50A 300V/55AIEC 450V/57A 450V/76ATemperature Rating C (F) -30 to 100°C (-22 to 212°F) -30 to 100°C (-22 to 212°F)Insulating Stripping Length mm (in.) 7.5 (0.30) 9.5 (0.37)Tightening Torque Nm (lbf.-in.) 0.8 (7.10) 1.2 (10.6)Screw Hole Diameter mm (in.) 3.6 (0.14) 5.1 (0.20)Mounting Hole Diameter mm (in.) 4.3 (0.17) 6.0 (0.24)

Ordering Information Cat. No. Cat. No.No. of Poles Translucent Translucent

2 55540.0 55560.03 55541.0 55561.04 55542.0 55562.05 55543.0 55563.06 55544.0 55564.07 55545.0 55565.08 55546.0 55566.09 55547.0 55567.010 55548.0 55568.011 55549.0 55569.012 55550.0 55570.0

CONTA-STRIPS – With Wire Protector• Flat Base• Color: Translucent • Side Wire Entry• Housing Material: Polyamide 6• Terminal Body/Screws: Nickel Plated Brass/Galvanized Steel• Temperature Rating: -22 to 212°F• Wire Protector: Stainless Steel

WireProtector

Std.Pk.10010010010050505050252525

Std.Pk.5050505025252525101010

Type/Wire Size mm2 CCIEKBSF 2.5 mm2 CCIEKBSF 6.0 mm2 CCIEKBSF 10.0 mm2


CONTA-CLIP, Inc. (732) 564-07056

CONTA-STRIPS – Without Wire Protector Standoff-Feet• Standoff-Feet• Color: Translucent • Side Wire Entry• Housing Material: Polyamide 6• Terminal Body/Screws: Nickel Plated Brass/Galvanized Steel• Temperature Rating: -22 to 212°F

Electrical Ratings: CSA/US 600V/20A 600V/30A 600V/50AIEC 450V/24A 450V/41A 450V/57ATemperature Rating C (F) -30 to 100°C (-22 to 212°F) -30 to 100°C (-22 to 212°F) -30 to 100°C (-22 to 212°F)Insulating Stripping Length mm (in.) 5.0 (0.20) 7.0 (0.28 7.5 (0.30)Tightening Torque Nm (lbf.-in.) 0.4 (3.54) 0.5 (4.43) 0.8 (7.10)Screw Hole Diameter mm (in.) 2.8 (0.11) 3.5 (0.14) 3.6 (0.14)Mounting Hole Diameter mm (in.) 2.8 (0.11) 3.6 (0.14) 4.3 (0.17)


2 13.5 (0.53) 16.8 (0.66) 19.75 (0.78)3 21.5 (0.85) 26.8 (1.06) 31.75 (1.25)4 29.5 (1.16) 36.8 (1.45) 43.75 (1.72)5 37.5 (1.48) 46.8 (1.84) 55.75 (2.19)6 45.5 (1.79) 56.8 (2.24) 67.75 (2.67)7 53.5 (2.11) 66.8 (2.63) 79.75 (3.14)8 61.5 (2.42) 76.8 (3.02) 91.75 (3.61)9 69.5 (2.74) 86.8 (3.42) 103.75 (4.08)10 77.5 (3.05) 96.8 (3.81) 115.75 (4.56)11 85.5 (3.34) 106.8 (4.20) 127.75 (5.03)12 93.5 (3.68) 116.8 (4.60) 139.75 (5.50)


2 55580.0 55600.0 55620.03 55581.0 55601.0 55621.04 55582.0 55602.0 55622.05 55583.0 55603.0 55623.06 55584.0 55604.0 55624.07 55585.0 55605.0 55625.08 55586.0 55606.0 55626.09 55487.0 55607.0 55627.010 55588.0 55608.0 55628.011 55589.0 55609.0 55629.012 55590.0 55610.0 55630.0

Std.Pk.10010010010050505050505050

Std.Pk.10010010010050505050505050

Std.Pk.10010010010050505050252525

Type/Wire Size mm2 CCIEKBSF 2.5 mm2 CCIEKBSF 6.0 mm2 CCIEKBSF 10.0 mm2



CONTA-STRIPS – With Wire Protector Standoff-Feet• Standoff-Feet• Color: Translucent • Side Wire Entry• Housing Material: Polyamide 6• Terminal Body/Screws: Nickel Plated Brass/Galvanized Steel• Temperature Rating: -22 to 212°F• Wire Protector: Stainless Steel

Electrical Ratings: CSA/US 600V/20A 600V/30A 600V/50AIEC 450V/24A 450V/41A 450V/57ATemperature Rating C (F) -30 to 100°C (-22 to 212°F) -30 to 100°C (-22 to 212°F) -30 to 100°C (-22 to 212°F)Insulating Stripping Length mm (in.) 5.0 (0.20) 7.0 (0.28 7.5 (0.30)Tightening Torque Nm (lbf.-in.) 0.4 (3.54) 0.5 (4.43) 0.8 (7.10)Screw Hole Diameter mm (in.) 2.8 (0.11) 3.5 (0.14) 3.6 (0.14)Mounting Hole Diameter mm (in.) 2.8 (0.11) 3.6 (0.14) 4.3 (0.17)


2 13.5 (0.53) 16.8 (0.66) 19.75 (0.78)3 21.5 (0.85) 26.8 (1.06) 31.75 (1.25)4 29.5 (1.16) 36.8 (1.45) 43.75 (1.72)5 37.5 (1.48) 46.8 (1.84) 55.75 (2.19)6 45.5 (1.79) 56.8 (2.24) 67.75 (2.67)7 53.5 (2.11) 66.8 (2.63) 79.75 (3.14)8 61.5 (2.42) 76.8 (3.02) 91.75 (3.61)9 69.5 (2.74) 86.8 (3.42) 103.75 (4.08)10 77.5 (3.05) 96.8 (3.81) 115.75 (4.56)11 85.5 (3.34) 106.8 (4.20) 127.75 (5.03)12 93.5 (3.68) 116.8 (4.60) 139.75 (5.50)


2 55640.0 55660.0 55680.03 55641.0 55661.0 55681.04 55642.0 55662.0 55682.05 55643.0 55663.0 55683.06 55644.0 55664.0 55684.07 55645.0 55665.0 55685.08 55646.0 55666.0 55686.09 55647.0 55667.0 55687.010 55648.0 55668.0 55688.011 55649.0 55669.0 55699.012 55650.0 55670.0 55690.0

Std.Pk.10010010010050505050505050

Std.Pk.10010010010050505050505050

Std.Pk.10010010010050505050252525

Type/Wire Size mm2 CCIEKB 2.5 mm2 CCIEKB 4.0 mm2 CCIEKB 10.0 mm2


CONTA-CLIP, Inc. (732) 564-07058

Pluggable CONTA-STRIPS – Without Wire Protector• Flat Base• Color: Translucent or Black• Side Wire Entry• Housing Material: Polyamide 6• Terminal Body/Screws: Nickel Plated Brass/Galvanized Steel• Temperature Rating: -22 to 212°F

Electrical Ratings: IEC 450V/24A 450V/32A 450V/41ATemperature Rating C (F) -30 to 100°C (-22 to 212°F) -30 to 100°C (-22 to 212°F) -30 to 100°C (-22 to 212°F)Insulating Stripping Length mm (in.) 5.0 (0.20) 6.0 (0.24) 7.5 (0.30)Tightening Torque Nm (lbf.-in.) 0.4 (3.54) 0.5 (4.43) 0.8 (7.10)Screw Hole Diameter mm (in.) 2.8 (0.11) 3.5 (0.14) 3.6 (0.14)Mounting Hole Diameter mm (in.) 2.8 (0.11) 3.2 (0.13) 4.3 (0.17)


2 13.5 (0.53) 16.5 (0.65) 19.75 (0.78)3 21.5 (0.85) 26.5 (1.04) 31.75 (1.25)4 29.5 (1.16) 36.5 (1.44) 43.75 (1.72)5 37.5 (1.48) 46.5 (1.83) 55.75 (2.19)6 45.5 (1.79) 56.5 (2.22) 67.75 (2.67)7 53.5 (2.11) 66.5 (2.62) 79.75 (3.14)8 61.5 (2.42) 76.5 (3.01) 91.75 (3.61)9 69.5 (2.74) 86.5 (3.41) 103.75 (4.08)10 77.5 (3.05) 96.5 (3.80) 115.75 (4.56)11 85.5 (3.34) 106.5 (4.19) 127.75 (5.03)12 93.5 (3.68) 116.5 (4.59) 139.75 (5.50)

Ordering Information Cat. No. Cat. No. Cat. No.No. of Poles Translucent Black Black

2 55700.0 55720.1 55740.13 55701.0 55721.1 55741.14 55702.0 55722.1 55742.15 55703.0 55723.1 55743.16 55704.0 55724.1 55744.17 55705.0 55725.1 55745.18 55706.0 55726.1 55746.19 55707.0 55727.1 55747.110 55708.0 55728.1 55748.111 55709.0 55729.1 55749.112 55710.0 55730.1 55750.1

Std.Pk.2525252520202020101010

Std.Pk.2525252520202020101010

Std.Pk.2525252520202020101010


High Temperature Ceramic Terminal BlocksWith and Without Wire Protector• Temperature Rating: -20 to 350°C (-4 to 660°F)• Body Material: Enameled Porcelain• Terminal Body: Nickel Plated Brass• Terminal Screws: Galvanized Steel• Tubular Screw Clamp

Item # Wire Size No. of Voltage V Ampere A Dimensions in mmAWG Poles IEC Rating IEC Rating A B C D a d K G Screws

1 22-12 2 450 24 18 15 16 - 10 2.8 4.6 2.8 M2.62 22-12 3 450 24 28 15 16 10 10 2.8 4.6 2.8 M2.63 22-10 2 450 32 20 17 17 - 11.5 3.1 7 3.5 M3 4 22-10 3 450 32 32 17 17 12 11.5 3.1 7 3.5 M35 22-8 2 450 41 21 17 17.5 - 12 3.6 6.5 3.4 M36 22-10 3 450 41 33 17 17.5 12 12 .6 6.5 3.4 M37 20-10 2 450 57 23 20 20 - 13 4.2 8.5 3.6 M3.58 20-8 3 450 57 36 20 20 13 13 4.2 8.5 3.6 M3.59 14-6 2 450 76 29 24 24 - 16.5 6 11 4.4 M410 14-6 3 450 76 46 24 24 16.5 16.5 6 11 4.4 M4

Catalog Number Catalog Number Item Number Without Wire Protector With Wire Protector

1 55760.1 55770.12 55761.1 55771.13 55762.1 55772.14 55763.1 55773.15 55764.1 55774.16 55765.1 55775.17 55766.1 55776.18 55767.1 55777.19 55768.1 55778.110 55769.1 55779.1

All dimensions are in mm –to convert to inches divide by 25.4Ceramic Body dimensions are ± 10%

Std.Pk.200200200200200200200200200200

CONTA-CLIP, Inc. (732) 564-070510

Terms & ConditionsGENERAL

No additions or modifications to the Terms and Conditions of Sale herein shall be binding upon CONTA-CLIP, Inc. unless authorized in writing by an Officer of CONTA-CLIP, Inc.

The conditions and provisions herein constitute and are essential portions of thisagreement. No prior agreement, oral or in writing, shall have validity, force or effectwhatever unless incorporated herein. Should any provision or condition or Buyer’sorder conflict with any provision herein contained, the provisions of this agreementshall prevail and be binding. The rights and obligations under this agreement shall begoverned by the Laws of the State of NJ. Errors and omissions by Seller may becorrected by Seller, if any, all or a part of one or more of the terms and conditions ofthis agreement should be declared illegal by any court of law, such part or such termor terms be considered deleted from this agreement, the remaining to be unaffectedand in full force and effect.

ORDER ACCEPTANCE

All customer orders will be in written form and are subject to acceptance by anauthorized individual of CONTA-CLIP, Inc. in Belle Mead, NJ. Typographical and othererrors made in quotations, order entry and acknowledgements are subject tocorrection. The minimum order is $100 net.

PRICES AND CONDITIONS

All prices are based on CONTA-CLIP, Inc.’s current Price List and are those in effectat the time of shipment. CONTA-CLIP, Inc. reserves the right to change prices at anytime without prior notification. All quotations must be confirmed in writing and arevalid for (30) days from the date of quotation, unless otherwise specified and must besigned by individuals authorized to make quotations. Unless otherwise stated on thequotation, prices are FOB Belle Mead, NJ. Prices exclude sales, use, excise, or other taxes which arise out of the sale. When applicable and required, such taxes will be added to the sale price.

TAXES

The Purchaser shall provide CONTA-CLIP, Inc. with a Resale Tax Certificate for thepurchased goods. If purchased items are not for resale, the Purchaser will beresponsible to pay all applicable sales, use, excise or similar taxes charged.

SHIPMENT AND FREIGHT

The shipment method and routing will be defined by the Purchaser on the purchaseorder. If instructions are not provided, CONTA-CLIP, Inc. will choose the shipmentmethod based upon the best way. All shipments will be sent prepaid with theshipping charges added to Purchaser’s invoice, unless otherwise directed by thePurchaser on the purchase order or provided for by a separate agreement betweenthe parties.

DELIVERIES

Delivery dates given on a quotation or in an order acknowledgement are based upongood faith estimates and are not guaranteed by CONTA-CLIP, Inc. CONTA-CLIP, Inc.shall not be liable for delays in delivery or in performance due to causes beyond itscontrol including transportation and customs delays, acts of God, acts of thePurchaser, acts of civil or military authority, fires, strikes or other labor disturbances,war, riot or national disasters.

In the event of such delay the promised date or performance shall be extended for aperiod equal to the time lost by reason of the delay. All stock items, unless reservedspecifically for a customer, are subject to prior sale.

PAYMENT TERMS

Payment is due within (30) days from the invoice date. In the event of referral to anattorney or agency for collection of a delinquent account, a collection fee of 10% ofthe overdue amount plus interest charges of one and one half percent per month will be due.

ORDER CANCELLATION

Orders placed by the Purchaser may be cancelled by the Purchaser with CONTA-CLIP, Inc’s written consent subject to assessment of a cancellation charge based on any costs incurred by CONTA-CLIP, Inc. in relation to production,processing and transportation of the cancelled order.

CLAIMS

Purchaser claims of shortages or deductions for erroneous charges must be madewithin (10) business days of Purchaser’s receipt of ordered product or such claimswill not be allowed.

RETURN GOODS

Any product returned to CONTA-CLIP, Inc. by the Purchaser will be accepted only ifthe following conditions are met:

All products returned to CONTA-CLIP, Inc. must be accompanied with a ReturnedMaterial Authorization Number obtained from CONTA-CLIP, Inc. No returnedproduct will be accepted without the Returned Material Authorization Numberclearly marked and visible on each carton.

All returned product is subject to inspection by CONTA-CLIP, Inc. This material mustconform to current catalog descriptions and be in resaleable condition.

Custom made, specially designed, obsolete products or those products designated as non-returnable in the current price list are not returnable for credit.All returned material is to be shipped freight prepaid. No “freight collect” shipmentswill be accepted.

The credit amount will be calculated on a last invoice basis. In the event that theoriginal invoice cannot be found, credit will be issued based on prices reflected inthe price list from two years back.

A restocking charge will apply to any returned product and the percentage will be determined by CONTA-CLIP, Inc. No restocking charge will apply to productdeemed nonconforming.

Any nonconforming product returned under warranty by Purchaser will be repairedor replaced at no charge for labor or parts if deemed deficient by CONTA-CLIP, Inc.provided the return complies with the following requirements:

a. Purchaser must submit a written claim to CONTA-CLIP, Inc. describing the specific nature of the relevant details relating to the nonconformance. Purchaser must not return nonconforming product to CONTA-CLIP, Inc. until a Returned Material Authorization Number has been requested by the Purchase and issued by CONTA-CLIP, Inc.

b. A return on nonconforming product must be made by Purchaser within (10) business days after the issuance date of the Returned Material Authorization.

c. Failure to satisfy any of these requirements for nonconforming products could result in a warranty claim as provided for under Limited Warranty to be disallowed.

Should any product returned to CONTA-CLIP, Inc. not meet the prescribed require-ments as defined herein under Returned Goods (10.), CONTA-CLIP, Inc. reservesthe right to either refuse receipt of returned product or to send back any returnedproduct which was already received at the Purchaser’s expense.

LIMITED WARRANTY

CONTA-CLIP, Inc. warrants to the Purchaser that the products purchased will be of merchantable quality and free from defects of material and workmanship and will be of kind and quality designated or so specified in the contract. This warrantyshall only apply to defects appearing within one year from the date of the CONTA-CLIP, Inc. invoice, with the exception of tools which will carry a six monthwarranty. CONTA-CLIP, Inc. will not be liable for any modification to its products by the purchaser.

Satisfaction of this warranty will be limited to (a) the replacement of the product byCONTA-CLIP, Inc. or (b) repair or modification of the product by CONTA-CLIP, Inc.or (c) issuance of a credit for the nonconforming products delivered under the orderinvolved. Rights under this warranty are available only if CONTA-CLIP, Inc. isnotified promptly in writing of the alleged nonconformance and CONTA-CLIP, Inc.’sexamination of the product discloses that the nonconformance was not due tomisuse, improper installation, improper operation, improper maintenance,alteration, modification, accident or unusual degradation of the equipment or partsdue to physical environments in excess of the limits.

There are no warranties which extend beyond this provision. This warranty is in lieuof all other warranties whether expressed, implied or statutory including impliedwarranties of merchantability or fitness. The Buyer acknowledges that we are notrelying on the seller’s skill or judgment to select or furnish goods suitable for anyparticular purpose. This warranty extends only to the purchaser from CONTA-CLIP,Inc. or its authorized distributor.

We reserve the right to correct errors, omissions and make revisions without notice.

At CONTA-CLIP we do our best to ensure that all information in this catalog isaccurate. However, we cannot be held responsible for errors in this catalog. We reserve the right to make changes to technical specifications and productslisted in this catalog. All product recommendations are based on our knowledgeand experience with the products listed in this catalog or on data sheets. It is the customer’s responsibility to ensure the suitability of our products for eachparticular application.


Literature Request FormPlease Fax Back to (732)564-0706

Please check the box to the right of the product you would like literature on:

Name Title

Company

Address

City/State/Zip

Country

Phone Fax

E-mail

Conta Strips PB Board Terminal Blocks

DIN RAIL Terminal Blocks

Cord Grips Enclosures Interface Modules

Mini Cable Trays Tools Ferrules

Cut Here

400 Apgar Drive, Suite DSomerset, NJ 08873

Phone 732-564-0705Fax 732-564-0706

[email protected]

© Copyright, CONTA-CLIP 2013 Rev. 12/13 Printed in USA

CONTA-CONNECT CONTA-ELECTRONICS CONTA-CON

Documents

TERMINAL BLOCKS - CONTA-CLIP - Homecontaclipinc.com/fileadmin/_migrated/content_uploads/Cat_Conta_Strips_eco__.pdf · 3 CONTA-STRIPS –Without Wire Protector •Flat Base •Colors: