42
NATIONAL PRODUCTIVITY COUNCIL(NPC) Dr. Ambedkar Institute of Productivity, (Under Ministry of Commerce & Industry, Government of India) No.6, Aavin Dairy Road, Ambattur Industrial Estate (North), Ambattur, Chennai – 600 098. Ph : +91-44-26251808, 26255216, Fax :+91-44-26254904 Email : [email protected] TENDER DOCUMENT VOLUME – III PRICE BID COMPOSITE CONTRACT FOR CIVIL, INTERIOR, ELECTRICAL AND MODULAR WORKS IN GROUND FLOOR OF MAIN BUILDING AT NPC, AMBATTUR, CHENNAI FOR LIBRARY, CLASS ROOM ETC., ARCHITECT M/s. NANDA & ASSOCIATES, NO 36,GROUND FL00R, JANAKIRAM COLONY MAIN ROAD, ARUMBAKKAM, CHENNAI - 600 106 .PHONE : 044(23637420) Email: [email protected]

TENDER DOCUMENT - · PDF fileProviding and laying in position machine batched and ... With out door frame Single door 32mm Flush door ... making arrangement for fixing of

  • Upload
    phamnhi

  • View
    214

  • Download
    1

Embed Size (px)

Citation preview

NATIONAL PRODUCTIVITY COUNCIL(NPC) Dr. Ambedkar Institute of Productivity, (Under Ministry of Commerce & Industry, Government of India) No.6, Aavin Dairy Road, Ambattur Industrial Estate (North), Ambattur, Chennai – 600 098. Ph : +91-44-26251808, 26255216, Fax :+91-44-26254904 Email : [email protected]

TENDER DOCUMENT

VOLUME – III PRICE BID

COMPOSITE CONTRACT FOR CIVIL, INTERIOR, ELECTRICAL AND

MODULAR WORKS IN GROUND FLOOR OF MAIN BUILDING AT NPC, AMBATTUR, CHENNAI FOR LIBRARY, CLASS ROOM ETC.,

ARCHITECT M/s. NANDA & ASSOCIATES,

NO 36,GROUND FL00R, JANAKIRAM COLONY MAIN ROAD, ARUMBAKKAM, CHENNAI - 600 106 .PHONE : 044(23637420) Email: [email protected]

 

S No NATURE OF WORK AMOUNT IN Rs.

I Civil worksII Plumbing worksIII Interior worksIV Electrical works,NetworkingV Broughtout Items - Modular & FurnitureVI Buyback ItemsVII Unforseen Items

GRAND TOTAL - (Inclusive of Taxes) in Rs :

PROJECT : PROPOSED COMPOSITE CONTRACT FOR CIVIL, INTERIOR, ELECTRICAL AND MODULAR WORKS IN GROUND FLOOR OF MAIN BUILDING AT NPC, AMBATTUR, CHENNAI FOR LIBRARY, CLASS ROOM ETC.,

(Rupees

CLIENT : NATIONAL PRODUCTIVITY COUNCIL AT AMBATTUR,CHENNAI.

SUBJECT : ALL VERTICALS GROUND FLOOR ESTIMATE SUMMARY - MAIN BUILDING

Client : National Productivity Council, Ambattur,Chennai. 1 of 41 Architect : M/S  Nanda & Associates,Chennai.

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

I Civil worksA Preparatory works

1.0

Breaking and Demolising the existing building or astructure obstructed inside the foundatrion or open asper the insturction of engineer in charge. The worksinvoled to demolish and remove the rubbish take awayfrom the site and dump it away to the recommendedarea that govt insisted.The rates inclusive of allmachineries ,labour,leading,lifting and transportcharges.(Demolition and breaking the exisitingwalls / concrete works / Floorings etc.. as per thenew designs.)

1.1 Demolishing RCC Cum 0.50

PROJECT : PROPOSED COMPOSITE CONTRACT FOR CIVIL, INTERIOR, ELECTRICAL AND MODULAR WORKS IN GROUND FLOOR OF MAIN BUILDING AT NPC, AMBATTUR, CHENNAI FOR LIBRARY, CLASS ROOM ETC.,

CLIENT : NATIONAL PRODUCTIVITY COUNCIL AT AMBATTUR,CHENNAI.

SUBJECT : MAIN BUILDING - GROUND FLOOR CIVIL BOQNote : (1) . The Quoted Rates Should be Inclusive of All taxes

(2) . The Rtaes Quoted in Figure and Words Whichever is less will only be considered for tender analysis.

(3) . Overwriting in rates should be avoided.

(4) . Corrections in rates should be attested by the bidder or by their authorized signatory.

Client : M/S National Productivity Council,Chennai 2 of 41 Architect M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

1.2 Breaking and demolition of existing Brick walls Cum 14.04

1.3 Dismantling Doors and Windows (above 3 SqM) Nos 11.00

1.4 Breaking and demolition of existing floorings & walltiles Sqm 648.58

1.5 Removal of exisitng Electrcial wires, sockets,conduits, Fittings L/S

1.6 Removal of existing Plumbing lines and drainageslines , Fittings L/S

B Anti Termite Work

2.0

Diluting and injecting chemical for Anti TermiteTreatment for Below Foundation ,Basement levelBelow PCC Building all-round with approvedchemical. Rates inclusive of supply mixing, applyingwith necessary safety precautions.

sqm 50.00

Client : M/S National Productivity Council,Chennai 3 of 41 Architect M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

C Reinforced Cement Concrete

3.0

Providing and laying in position machine batched andmachine mixed design mix M-25 grade cementconcrete for reinforced cement concrete work, usingcement content as per approved design mix, includingpumping of concrete to site of laying and It includesthe cost of centering, shuttering, finishing admixturesin recommended proportions as per IS: 9103 toaccelerate, retard setting of concrete, improveworkability without impairing strength and durabilityas per direction of Engineer-in-charge. (Excludingreinforcement)

3.1All works above plinth level up to floor V level.

cum 0.50

D Steel Reinforcement

4.0Steel reinforcement for R.C.C. work includingstraightening, cutting, bending, placing in position Kg 34.10

Client : M/S National Productivity Council,Chennai 4 of 41 Architect M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

E Super Structure Works

5.0

Brick work with common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 insuperstructure above plinth level up to floor V level inall shapes and sizes in : Cement mortar 1:6 (1 cement :6 coarse sand)

cum 3.40

6.0

Half brick masonry with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 insuperstructure with Cement mortar 1:3 (1 cement :3coarse sand) above plinth level up to floor V level.And Extra for providing and placing in position 2Nos. 6mm dia. M.S. bars at every third course of halfbrick masonry.

sqm 16.50

F Plastering Works

7.0 12 mm cement plaster of mix : 1:4 (1 cement: 4 finesand) -Internal walls sqm 194.94

Client : M/S National Productivity Council,Chennai 5 of 41 Architect M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

G Flooring & Daddoing

8.0

Providing and fixing 18mm thick gang saw cutmirror polished premoulded and prepolished)machine cut Granite of any colour and shade for kitchen platforms,Staircase steps vanity counters,window sills , facias and similar locations of requiredsize of approved shade, colour and texture laid over20mm thick base cement mortar 1:4 (1 cement : 4coarse sand) with joints treated with white cement,mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing toedges to give high gloss finish etc. complete at alllevels.The Rates inclusive of Skirting Basic rate forGranite is Rs. 2200/- per Sqm.

sqm 20.29

8.1 Commen Area Granite works sqm 186.08

8.2 Toilet Flooring Granite work sqm 25.10

Client : M/S National Productivity Council,Chennai 6 of 41 Architect M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

9.0

Providing and fixing 25mm thick gang saw cutDouble side polished premoulded and prepolished)machine cut Granite of any colour and shade forUrinals intermeditent of required size of approvedshade, colour and texture laid over 20mm thick basecement mortar 1:4 (1 cement : 4 coarse sand) withjoints treated with white cement, mixed with matchingpigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high glossfinish etc. complete at all levels.The Rates inclusive ofSkirting Basic rate for Granite is Rs. 3000/- perSqm.

Sqm 2.16

Client : M/S National Productivity Council,Chennai 7 of 41 Architect M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

10.0

Providing and fixing 10mm thick Granite tiles gangsaw cut mirror polished premoulded and prepolished)machine cut Granite of any colour and shade for Toilet dadoing, facias and similar locations ofrequired size of approved shade, colour and texturelaid over 20mm thick base cement mortar 1:4 (1cement : 4 coarse sand) with joints treated with whitecement, mixed with matching pigment, epoxy touchups, including rubbing, curing, moulding andpolishing to edges to give high gloss finish etc.complete at all levels.The Rates inclusive of SkirtingBasic rate for Granite is Rs. 1500/- per Sqm.

sqm 105.39

Client : M/S National Productivity Council,Chennai 8 of 41 Architect M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

11.0

Providing and laying vitrified floor tiles Size of Tile600x600 mm in (thickness to be specified by themanufacturer) for with water absorption's less than0.08%and conforming to IS : 15622 of approved makein all colours and shades, laid on 20mm thick cementmortar 1:4 (1 cement : 4 coarse sand) includinggrouting the joints with white cement and matchingpigments etc., The Rates inclusive of Skirtingcomplete. Basic rate for Tile is Rs. 800/- per Sqm

sqm 302.53

H Joinery works

12.0

Supplying and Providing a double door with 2ndquality Teakwood frame 125mm x 75mm andShutters made with 32 mm Flush doors withcombination of 3mm BST veneer fininsh and 1mmlaminate.And alround the shutters fix the TW beedingwith 5mm thick, fixing of 6mm thick clear glasshaving opening of size of 400mm x 1800mm withBrass Hinges handles Automatic door closer,Magnetic Catcher,safty chain and godrej 7 levers lockwith Key, door stopper, tower bolts etc… complete .

12.1 1500mm x 2100mm Sqm 3.15

Client : M/S National Productivity Council,Chennai 9 of 41 Architect M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

13.0

Supplying and Providing of Good quality Padakwood frame (100mm x 75mm) ,Shutters made with32mm Flush door with 1mm laminate on both sidesincluding alround TW beeding with 5mm thick ,SSHinges handles, Magnetic Catcher,and godrej Morticelock, door stopper, tower bolts etc… complete .

13.1 900mm x 2100mm Sqm 7.56

14.0Supplying and Providing of PVC door frame andshutters with Hinges, handles, lock, tower bolts etc…complete .

14.1 750mm x 2100mm Sqm 7.88

15.0Flush door with 1mm laminate on both sidesincluding alround TW beeding with 5mm thick ,SSHinges handles, Magnetic Catcher,and godrej Mortice

Sqm 15.12

16.0

With out door frame Single door 32mm Flush doorwith 1mm laminate on both sides including alroundTW beeding with 5mm thick ,SS Hinges handles,Magnetic Catcher,and godrej Mortice lock, doorstopper, tower bolts etc… complete .

Sqm 2.52

Client : M/S National Productivity Council,Chennai 10 of 41 Architect M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

UPVC windows Factory Made: (Double Glazing)

17.0

UPVC windows & Ventilators - Providing and Fixing,uPVC factory made, white colourcasement/Fixed/Openaple window and door made ofextruded profiles. Profiles of frames and sash will bemitered cut and fusion welded at all corners includingdrilling of holes for fixing hardware and drainage ofwater etc., making arrangement for fixing ofhardware, EPDM gasket, 1.2 ± 0.2mm thickgalvanised steel profile to be inserted in requiredprofile, frame will be fixed to the wall with 8 mm x100 mm long fasteners, all complete as per directionof Engineer-in-charge. The Rates inclusive of 6mmwith Double Glazing, hardware hinges and fitting etc.

Sqm 64.80

Client : M/S National Productivity Council,Chennai 11 of 41 Architect M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

18.0

UPVC Ventilater size : 900mm x 600mmUPVC windows & Ventilators - Providing and Fixing, uPVC factory made, white colour casement/Fixed/Openaple window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per direction of Engineer-in-charge. The Rates inclusive of 6mm Glazing, hardware hinges and fitting etc.

Sqm 3.78

Client : M/S National Productivity Council,Chennai 12 of 41 Architect M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

I Ornamental Metal works

19.0

Window Grills - Structural steel work riveted, boltedor welded in built up sections, trusses and framedwork, including cutting, hoisting, fixing in positionand applying a priming coat of approved steel primerall complete:

Kg 60.53

20.0 SKY LIGHT WORK - PEB STRUCTURALWORKS

Design, Fabrication and Erection of Primary Steel Structures - as per above mentioned specifications, dimensions and design standards. For shed size as per drawing

Design, Fabrication and Erection of Secondary Steel Structures - (Purling & Grits) - as per above mentioned specifications, dimensions and design standards.

Design, Fabrication and Erection of Sag & Bracing Rods - (Including Primary and Secondary Framing, foundation bolts, fasteners etc) - as per above mentioned specifications, dimensions and design standards.

Client : M/S National Productivity Council,Chennai 13 of 41 Architect M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

Supply and Fixing of 0.47mm thick,AZ 150 and 550 Mpa, Bare Galvalume, Roofing Sheets

Supply and Fixing of 0.47mm thick,AZ 150 and 550Mpa,Colour Coated Galvalume,Sides Cladding sheets 2.5 Mtr

Supply and Fixing of 0.47mm thick,AZ 150 and 550 Mpa,Bare Galvalume,Profile Ridge Sqm 63.00

Supply and Fixing of 0.47mm thick,AZ 150 and 550 Mpa,Colour Coated Galvalume,Eave Gutter

Supply and Fixing of 0.47mm thick,AZ 150 and 550Mpa,Colour Coated Galvalume,Downtake Pipes

Supply & Fixing of 0.47mm thk, AZ 150, and 550 MPa, Color Coated Galvalume - ROOFING ACCESSORIES (Flashings, Corner trims, etc)

Sub Total - Civil works

Client : M/S National Productivity Council,Chennai 14 of 41 Architect M/S Nanda & Associates,Chennai

S.No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

II PLUMBING WORKSPART - A SOIL, WASTE AND VENT PIPELINES

21.0Supplying and fixing approved makeU PVC pipes and specials equivalent make including cutting pipes, fixing to walls or brackets using MS clamps, making joints using solvent cement solution, using ring seal couplers on size of pipes of fully sizes cutting walls or concrete surface, making grooves in masonry to conceal the pipes, restoring damaged portions with CM 1:4 and jelly, to their original condition, conducting leak test, fixing and removing temporary scaffolding, conveying dismantled debris and disposal of debris away from the size etc. complete.

Note : (1) . The Quoted Rates Should be Inclusive of All taxes

CLIENT : NATIONAL PRODUCTIVITY COUNCIL AT AMBATTUR,CHENNAI.PROJECT : PROPOSED COMPOSITE CONTRACT FOR CIVIL, INTERIOR, ELECTRICAL AND MODULAR WORKS IN GROUND FLOOR OF MAIN BUILDING AT NPC, AMBATTUR, CHENNAI FOR LIBRARY, CLASS ROOM ETC.,

SUBJECT : ADMIN BLOCK - GROUND FLOOR PLUMBING BOQ

(2) . The Rtaes Quoted in Figure and Words Whichever is less will only be considered for tender analysis.

(3) . Overwriting in rates should be avoided.

(4) . Corrections in rates should be attested by the bidder or by their authorized signatory.

Client : M/S National Productivity Council,Chennai 15 of 41 Architect M/S Nanda & Associates,Chennai

S.No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

21.1 40mm dia. 6kg class pipes. Rmt 22.0021.2 75mm dia. 6kg class pipes. Rmt 45.0021.3 110mm dia. 6kg class pipes. Rmt 15.0021.4 110mm dia 6kg class pipe for rain water harvesting

PVC Pipe of ISI mark making good and original condition

Rmt 15.00

22.0 Supplying and laying metel floor traps fabricated out of 110mm dia 6kg Class PVC pipes with inlet and outlets from 40mm upto 75mm, including providing water seal, fixing to a perfect level, laying cement concrete in 1:3:6 mix using 20mm size coarse graded aggregate, providing 150x150mm size SS grating with frame alround, at 4mm below finished floor level making holes in masonry or concrete cutting surfaces, conveying all dismantled portions and clearing the site, making leak proof joints and testing etc., complete and as directed.

Each 20.00

23.0Providing and laying cement concrete in 1:4:8 mix using 10mm to 12mm chips aggregate including fixing and removing temporary supports to side etc., complete for PVC pipe work laid above sunken slab and to locations wherever required.

Rmt 10.00

Client : M/S National Productivity Council,Chennai 16 of 41 Architect M/S Nanda & Associates,Chennai

S.No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

24.0

Supply & fixing In position 150 x 100 mm square mouth 'P' or 'S' trap stoneware Gully trap 'A' grade with cast iron gratings of size 300 x 300 mm with air tight cover with frames of size 300 x 300 mm at bottom & top respectively with necessary earth work excativation , laid over a bed of brickjelly including necessary brick work & plastering & including dismantling masonary wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the gullytrap & giving connections to the stoneware sewerline etc., complete complying with standard specification .( The stone ware gully trap should be got approved by the executive Engineer before use on works).

Each 4.00

Client : M/S National Productivity Council,Chennai 17 of 41 Architect M/S Nanda & Associates,Chennai

S.No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

25.0

Construction of brick masonry inspection Chamber with air tight manhole Cover heavey duty with two screening arrangement with second sort table moulded brick in cement morter 1;5( 1 cement ; 5 sand) for valves with pre cast cement concrete 75mm thick 1;2;4; with 100 mm square opening including centering,shuttering and reinforcement for 1;2;4 mix ( 1 cement ; 2 sand 4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1;5;10 ( 1 cement : 5 sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with 12mm thick cement mortar 1:3 ( 1 cement : 3 sand) finished with a floating coat of neat cemenet complete as per standard design.

Each 2.00

Total for Part - A RS.

Client : M/S National Productivity Council,Chennai 18 of 41 Architect M/S Nanda & Associates,Chennai

S.No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

PART - B WATER SUPPLY26.0

Supplying and fixing approved make Sch 80 CPVC pipes with upvc pipe specials such as tees, elbows, couplings nipples, flanges, etc. including cutting, threading, cutting chassing in walls and concealing the pipes in wall wherever laid inside the toilet complete with making holes in walls, floors, slabs, etc. earthwork excavation, back filling to consolidation, redoing the distrubed portions, testing and commissioing complete as directed.

26.1 20mm dia cpvc pipe Rmt 30.0026.2 25mm dia cpvc pipe Rmt 60.0026.3 32mm dia cpvc pipe Rmt 20.0027.0

Supplying and fixing RB/CIMBERIO MAKE brass ball valve of approved make with ISI make including fixing in position, making holes, restoring the damaged portions to original position and applying jointing compound at threaded ends and testing etc. complete as directed.

27.1 25 mm ball valve Each 10.0027.2 32 mm ball valve Each 4.00

Client : M/S National Productivity Council,Chennai 19 of 41 Architect M/S Nanda & Associates,Chennai

S.No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

28.0 Supplying and fixing 15mm CP pillar cock longneck for wash basin.Make : Jaquar FLR 5021 Each 16.00

29.0Supplying and fixing 15mm CP inlet valve with CP connection (Angle valve) Make : Jaquar- FLR 5053N

Each 20.00

30.0Supplying and fixing 15mm CP health faucet with flexible hose 1.0mtr with stand. Make: Jaquar ALD IVY - 583.

Each 12.00

31.0Supplying and fixing M.S. Pre-fabricated bracketswith necessary 'U' clamps and bolt nuts groutingwalls with necessary cm and jelly etc. complete

Soil waste and Wash water pipe line supports in thewalls. Kgs 5.00

Total for Part - BGRAND TOTAL-PART A+B

Client : M/S National Productivity Council,Chennai 20 of 41 Architect M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

III INTERIOR WORK

A FALSE CELING

32.0

Gypsym ceiling - Providing and fixing suspendedgypboard false ceiling, which includes providing &fixing GI perimeter channels of size 27mm, 0.5mm thickhaving one flange of 20mm & another flange of 30mmalong with perimeter of the ceiling, screws fixed to brickwall / partitions with the help of rawl plugs & screws.Then suspending GI intermediate channels of size45mm, 0.9mm thick with two flanges of 15mm eachfrom the soffit at 1200mm centers with steel GI hangerof which 25mm, 0.5mm thick fixed to soffit with GIcleat & steel expansion fastners.

sqm 256.71

(3) . Overwriting in rates should be avoided.

(4) . Corrections in rates should be attested by the bidder or by their authorized signatory.

CLIENT : NATIONAL PRODUCTIVITY COUNCIL AT AMBATTUR,CHENNAI.

PROJECT : PROPOSED COMPOSITE CONTRACT FOR CIVIL, INTERIOR, ELECTRICAL AND MODULAR WORKS IN GROUND FLOOR OF MAIN BUILDING AT NPC, AMBATTUR, CHENNAI FOR LIBRARY, CLASS ROOM ETC.,

SUBJECT : ADMIN BLOCK - GROUND FLOOR INTERIOR BOQNote : (1) . The Quoted Rates Should be Inclusive of All taxes

(2) . The Rtaes Quoted in Figure and Words Whichever is less will only be considered for tender analysis.

Client : M/S National Productivity Council,Chennai 21 of 41 Architect : M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

Ceiling section of 0.5mm thickness having knurledwedge of 51.5mm and two flanges of 25mm each withleafs of 10.5mm are then fixed to the intermediatechannel with the help of connecting clips and indirection perpendicular to the intermediate channel at450mm centers. 12.5mmtapered edge gypboard is thenscrewed fixed to ceiling section with 25mm dry wallscrews at 230mm centers screw fixing will be donemechanically either with screw driver or drillingmachine with suitable attachment. Finally the taperedand squared edges of the boards are jointed at finished togive a flushed finish with requisite jointing compound,paper tapes, finished and premier suitable for Gypsumplaster boards. The entire work shall be finished as perinstructions of the Architect. No extra cost shall beentertained in completing the job in all respect. Theceiling to be finished with 2 coats of approved colour ofplastic emulsion paint over a primer coat.

Client : M/S National Productivity Council,Chennai 22 of 41 Architect : M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

Grid Ceiling

33.0

Providing and fixing in true horizontal level false ceilinggrid of Prelude exposed 24 mm grid system with 15mmmanufactured by Approved Make by Architect.Usinghot dipped chemically cleaned capping prefinished inbaked polyster galvanized steel section exposed surfacepaint wall angle of size 3000 x 19 x 19mm used in theperiphery of the ceiling fixed to the wall partition RCcolumn band walls with the help of screw at 600mmC/C. main runner of size 3000x15x32mm suspended at a1200mm C/C by using 2mm/3mm dia GI wire hangersecurely fixed to the structural soffit of RC slab by using6mm anchor fastener at every 1200mm (max) and1200mm long cross tee of size 15 x 32mm to beinterlocked between in main runner at 600mm C/C.(max) to form a grid of 1200 x 600mm.long cross tee ofsize 15 x 32 fixed In between 1200 mm long cross teefor forming a grid of 600 x 600mm. Finally layingArmstrong Lay - in Fine fissured 99 Board edge Ceilingwith Perforated (standard) tile of Trulok Edgemanufactured by M/s Armstrong world Industries Ltd(or) Equivalent.

33.1 Director head,meeting,DDG and ,waiting room Sqm 37.44

Client : M/S National Productivity Council,Chennai 23 of 41 Architect : M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

DOORSPartitons Door

34.0

Supply & fixing of flush door made of 900 x 2100mmTW frame and Shutters with 1mm laminate on both sidesand provision of Vision Panel having a size as per in thedrawing or 300mm x 1500mm alround the glassopenings provide with 12mm x 25mm teak woodbeading, . S.S. Hinges and 450mm High , 22mm DiaS.S. Handles, and stopper of approved make and model.Frame in 75mm x 60mm seasoned Teakwood sectionfinished as per drawing.

34.1 DOOR-1 Sqm 7.56PARTITION

35.0

Full Height Partiton - Providing and fixing of fullheight partitions of up to height of 2.7m from Finishedfloor level made of 60mm x 60mm salwood frame workfinished with 2 coats of termite resistant coating (to beapproved by architect) with vertical member at 10’6”,level 8’0” level 4’0” level & floor level. The framework to be cladded on both sides with 8mm thick WaterProof commercial plywood and finished with 1 mmthick decorative laminate on all exposed surfaces.

sqm 32.41

Client : M/S National Productivity Council,Chennai 24 of 41 Architect : M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

Roller Blinds

36.0

Providing and fixing roller blinds with 38mm OD rollformed and lock seamed steel of 0.5mm thicknesssuitably protected against corrosion. Chain drive unitshall be of high engineering grade moulded plastic withsteel support pin enclosed in a plastic housing andinserted into the control tube end. it shall be driven by aball chain pulley attached to a specially designed clutchmechanism, forming a continuous loop. Control Ballchain shall be composed of braided nylon cord (2mmdia.) with high engineering grade plastic beads of 4.5mmdiameter mounted co-axially on the cord with a pitch of6.2 mm (C-T-C). It is used for raising or lowering theshade. Bottom rail shall be aluminum tube, anodizedwith a diameter of 20mm and thickness of 0.5mm.

sqm 68.00

The return end cap bracket shall incorporate a snapspring design to facilitate easy installation and removalfor maintenance activities. The bracket shall be finishedwith a flush mounting cover on each side providing anaesthetic finish. The clutch should mount flush to theface of the bracket, which minimizes the light gapbetween the shade and the window frame. by nylon plugand screw as per approved design and directions of theArchitect.

Client : M/S National Productivity Council,Chennai 25 of 41 Architect : M/S Nanda & Associates,Chennai

S No DESCRIPTION OF WORKS UNIT QTY Rate/ Unit [ Figures]

Rate/ Unit [ Words]

AMOUNT IN Rs.

Extrerior Facia workPainting

37.0

Preparing the surfaces of Plastered walls and ceilingsurfaces providing and applying two or more coats ofapproved Plastic Emulsion paint.Over 2 coat of Puttyand One coat of Primer at all levels includingscaffolding if required, etc. complete.

sqm 899.30

38.0

Preparing the surfaces of Plastered walls and RCCsurfaces providing and applying approved Quality ofTexture Over that 2 coat of emulsion with 1 coatprimer at all levels including scaffolding if required, etc.complete.

sqm 35.75

39.0Synthetic enamel painting works in wooden & Steelsurfaces. 2 coats of approved color and shade over a coatof primer with wooden/ Metal paste putty.

sqm 118.04

40.0

Preparing the surfaces of Existing & plastered externalwalls and existing surfaces to scrap and clean,providing and applying two coats of approved color andshade. Exterior paint of approved make over a coat ofprimer including scaffolding,and removing thescaffolding, Old surfaces

sqm 540.17

GRAND TOTAL - Interior works

Client : M/S National Productivity Council,Chennai 26 of 41 Architect : M/S Nanda & Associates,Chennai

ITEM NO DESCRIPTION UNIT QTY Rate/ Unit

[ Figures]Rate/ Unit [ Words]

AMOUNT IN Rs.

IV ELECTRICALS WORKSWIRINGMCCB, MCB & DB'S

41.0

Supplying and fixing following way prewiredTP&N MCB distribution board of steel sheet for415 volts on surface/ recess complete with loosewire box, terminal connectors for all incoming andoutgoing circuits, duly prewired with suitable sizeFR PVC insulated copper conductor up to terminalblocks, tinned copper bus bar, neutral link, earthbar, din bar, detachable gland plate,interconnections, powder painted includingearthing etc. as required.(But without MCB/RCCB/ Isolator)

(2) . The Rtaes Quoted in Figure and Words Whichever is less will only be considered for tender analysis.

(3) . Overwriting in rates should be avoided.

(4) . Corrections in rates should be attested by the bidder or by their authorized signatory.

CLIENT : M/S. NATIONAL PRODUCTIVITY COUNCIL,AMBATTUR,CHENNAI

SUBJECT : ADMIN BLOCK - GROUND FLOOR ELECTRICAL BOQ

PROJECT : PROPOSED COMPOSITE CONTRACT FOR CIVIL, INTERIOR, ELECTRICAL AND MODULAR WORKS IN GROUND FLOOR OF MAIN BUILDING AT NPC, AMBATTUR, CHENNAI FOR LIBRARY, CLASS ROOM ETC.,

Note : (1) . The Quoted Rates Should be Inclusive of All taxes

Client : M/S National Productivity Council,Chennai 27 of 41 Architect : Nanda & Associates

ITEM NO DESCRIPTION UNIT QTY Rate/ Unit

[ Figures]Rate/ Unit [ Words]

AMOUNT IN Rs.

41.1 4 way (4 + 12), Double door Each 241.2 6 way (4 + 18), Double door Each 1

42.0

Supplying and fixing following way prewiredSP&N MCB distribution board of steel sheet for240 volts on surface/ recess complete with loosewire box, terminal connectors for all incoming andoutgoing circuits, duly prewired with suitable sizeFR PVC insulated copper conductor up to terminalblocks, tinned copper bus bar, neutral link, earthbar, din bar, detachable gland plate,interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/ Isolator)

42.1 2 + 12 way, Double door Each 1

43.0

Supplying and fixing 5 amps to 32 amps rating,240/415 volts, "C" curve, miniature circuit breakersuitable for inductive load of following poles in theexisting MCB DB complete with connections,testing and commissioning etc. as required.

43.1 Single pole Each 52

43.2 Double pole Each 1

43.3 Triple pole and neutral Each 3

Client : M/S National Productivity Council,Chennai 28 of 41 Architect : Nanda & Associates

ITEM NO DESCRIPTION UNIT QTY Rate/ Unit

[ Figures]Rate/ Unit [ Words]

AMOUNT IN Rs.

44.0

Rewiring for light point/ fan point/ exhaust fanpoint/ call bell point with 1.5 sq.mm FR PVCinsulated copper conductor single core cable and1.5 sq.mm. FR PVC insulated copper conductorsingle core cable as earth wire in existing surface/recessed steel conduit including dismantling asrequired.

44.1 Group A Point 50

44.2 Group B Point QRO

44.3 Group C Point QRO

45.0

Wiring for light point/ fan point/ exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulatedcopper conductor single core cable in surface /recessed medium class PVC conduit, with modularswitch, modular plate, suitable GI box and earthingthe point with 1.5 sq.mm. FR PVC insulated copperconductor single core cable etc as required.

45.1 Group A Point 50

45.2 Group B Point QRO

45.3 Group C Point QRO

Client : M/S National Productivity Council,Chennai 29 of 41 Architect : Nanda & Associates

ITEM NO DESCRIPTION UNIT QTY Rate/ Unit

[ Figures]Rate/ Unit [ Words]

AMOUNT IN Rs.

46.0

Wiring for twin control light point with 1.5 sq.mmFR PVC insulated copper conductor single corecable in surface / recessed medium class PVCconduit, 2 way modular switch, modular plate,suitable GI box and earthing the point with 1.5sq.mm. FR PVC insulated copper conductor singlecore cable etc as required.

Point QRO

47.0

Supplying and fixing 20 amps, 240 volts, SPNindustrial type, socket outlet, with 2 pole and earth,metal enclosed plug top alongwith 20 amps "C"curve, SP, MCB, in sheet steel enclosure, onsurface or in recess, with chained metal cover forthe socket out let and complete with connections,testing and commissioning etc. as required.

Each 6

48.0

Supplying and fixing suitable size GI box withmodular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6amps modular socket outlet and 5/6 amps modularswitch, connection etc. as required. (For light plugsto be used in non residential buildings).

Each 10

Client : M/S National Productivity Council,Chennai 30 of 41 Architect : Nanda & Associates

ITEM NO DESCRIPTION UNIT QTY Rate/ Unit

[ Figures]Rate/ Unit [ Words]

AMOUNT IN Rs.

49.0

Supplying and fixing suitable size GI box withmodular plate and cover in front on surface or inrecess, including providing and fixing 6 pin 5/6 &15/16 amps modular socket outlet and 15/16 ampsmodular switch, connection etc. as required.

Each 17

50.0

Wiring for circuit/ submain wiring alongwith earthwire with the following sizes of FR PVC insulatedcopper conductor, single core cable in surface/recessed medium class PVC conduit as required

50.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 100

50.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 200

50.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 200

50.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 20

50.5 2 X 10 sq. mm + 1 X 10 sq. mm earth wire Metre QRO

MV CABLE LAYING

51.0

Supplying and drawing following pair 0.5 sq mmFR PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/recessed steel/ PVC conduit as required.

51.1 4 Pair Metre 275

Client : M/S National Productivity Council,Chennai 31 of 41 Architect : Nanda & Associates

ITEM NO DESCRIPTION UNIT QTY Rate/ Unit

[ Figures]Rate/ Unit [ Words]

AMOUNT IN Rs.

52.0

Supplying and drawing co-axial TV cable RG-6grade, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid andprotected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required.

Metre QRO

53.0

Supplying and fixing of following sizes of mediumclass PVC conduit along with accessories insurface/recess including cutting the wall andmaking good the same in case of recessed conduitas required.

53.1 20 mm Metre 5053.2 25 mm Metre 5053.3 32 mm Metre 25

54.0Supplying and fixing following piano type switch/socket on the existing switch box/ cover includingconnections etc. as required.

54.1 5/6 amps switch Each 40

54.2 15/16 amp switch Each 10

54.3 3 pin 5/6 amp socket outlet Each 50

54.4 6 pin 15/16 amp socket outlet Each 5

54.5 Telephone socket outlet Each 10

Client : M/S National Productivity Council,Chennai 32 of 41 Architect : Nanda & Associates

ITEM NO DESCRIPTION UNIT QTY Rate/ Unit

[ Figures]Rate/ Unit [ Words]

AMOUNT IN Rs.

54.6 TV antenna socket outlet Each 2

54.7 Bell push Each QRO

55.0

Supplying and fixing stepped type electronic fanregulator on the existing modular plate switch boxincluding connections but excluding modular plateetc. as required. Each

2

56.0Supplying and fixing modular blanking plate on theexisting modular plate & switch box excludingmodular plate as required. Each

15

57.0Supplying and fixing following size/ modules, GIbox alongwith modular base & cover plate for

d l it h i t i d57.1 1 or 2 Module (75mmX75mm) Each 5

57.2 3 Module (100mmX75mm) Each 20

57.3 4 Module (125mmX75mm) Each 10

57.4 6 Module (200mmX75mm) Each 10

57.5 8 Module (125mmX125mm) Each 10

58Supplying and fixing following Modular base &cover plate on existing modular metal boxes etc. asrequired.

58.1 1 or 2 Module Each 5

58.2 3 Module Each 20

Client : M/S National Productivity Council,Chennai 33 of 41 Architect : Nanda & Associates

ITEM NO DESCRIPTION UNIT QTY Rate/ Unit

[ Figures]Rate/ Unit [ Words]

AMOUNT IN Rs.

58.3 4 Module Each 10

58.4 6 Module Each 10

58.5 8 Module Each 10

EARTHING

59.0

Providing and laying earth connection from earthelectrode with 6 SWG dia G.I. Wire in 15 mm diaG.I. pipe from earth electrode including connectionwith G.I. thimble excavation and re-filling asrequired.

Metre 50

TOTAL AMOUNT FOR ELECTRICALWORKS (ADMIN BLOCK)

60.0

Suppling,Laying,Connecting & Commissioning ofthe CAT - 6 DATA Communication Cable in 25mm dia PVC Conduits and Making holes in theAluminium partitions / wall Accessories asRequired ( D- Link)

Metre 300

Client : M/S National Productivity Council,Chennai 34 of 41 Architect : Nanda & Associates

ITEM NO DESCRIPTION UNIT QTY Rate/ Unit

[ Figures]Rate/ Unit [ Words]

AMOUNT IN Rs.

61.0

Supply & Installation, Testing & Commisioning ofModular Type 1 No of RJ Female jack Housed inGI anodised Metal Box with Suitable FacePlateFixing the Same in the wall / partitons Withaccessories etc.. As required.

Set 12

62.0 Supply and Installation of 1Mtr Mounting Card ( D- Link) Set 12

63.0 Supply and Installation of 2Mtr Mounting Card (D - Link) Set 12

64.0 Supply and installation of 16 Port CAT - 6 JackPanel ( D - Link) Set 1

65.0Supply & Installation, Testing & Commisioning of16 Port 10/100 Mbps un Manged Netgear SwitchMake : DLINK/AMP/MOLEX

Set 1

66.0Supply & Installation, Testing & Commisioning of9U WALL/FLOOR Mountable Closed Rack WithPower, Adopter With accessories etc.. As required.

Set 1

TOTAL AMOUNT FOR NETWORKING WORKS(ADMIN BLOCK)TOTAL AMOUNT FOR ELECTRICAL &NETWORKING WORKS (ADMIN BLOCK)

Client : M/S National Productivity Council,Chennai 35 of 41 Architect : Nanda & Associates

S.NO DESCRIPTION OF WORK UNITQTYNos.

Rate/ Unit [ Figures]

Rate/ Unit [ Words] AMOUNT - Rs.

V MODULAR TABLE WORKSA FURNITURE:i Size - 1500mm x 1500mm x 600mmii Partition - 50-75mm thk MS / Aluminum Powder coated - 4'0" Ht.

iii Partition top tile -

iv Partition bottom tile -

v Trims - Profile as per your stds with powder coated finish.

vi Frames - Frames shall be aluminum/MS with powder coated finish.

vii Wire management -2nos. Raceways, one above the tabletop level & other at skirting level (flappable).

Inner & Outer tile: Pre-Lam MDF board 12mm tile with fire retardant fabric upholstered.Inner & Outer tile: Perforrated metal /Pre-Lam MDF board 12mm tile with PVC edging.

CLIENT : NATIONAL PRODUCTIVITY COUNCIL AT AMBATTUR,CHENNAI.PROJECT : PROPOSED COMPOSITE CONTRACT FOR CIVIL, INTERIOR, ELECTRICAL AND MODULAR WORKS IN GROUND FLOOR OF MAIN BUILDING AT NPC, AMBATTUR, CHENNAI FOR LIBRARY, CLASS ROOM ETC.,SUBJECT : ADMIN BLOCK - GROUND FLOOR MODULAR TABLE WORKSNote : (1) . The Quoted Rates Should be Inclusive of All taxes

(2) . The Rtaes Quoted in Figure and Words Whichever is less will only be considered for tender analysis.

(3) . Overwriting in rates should be avoided.

(4) . Corrections in rates should be attested by the bidder or by their authorized signatory.

Client : M/S National Productivity Council,Chennai 36 of 41 Architect: M/S.Nanda & Associates,Chennai

S.NO DESCRIPTION OF WORK UNITQTYNos.

Rate/ Unit [ Figures]

Rate/ Unit [ Words] AMOUNT - Rs.

viii Table Top -

Single piece top size of 1500 x 1500 x 600mmix Gable Ends - Pre-Laminated18/25mm thk board as per standard design.

x Accessories - Includes necessary powder coated MS brackets, Poles, etc.

xi Levelers - Sturdy levelers are provided to counter uneven floor surface.

xii Others -

xiii Mobile Pedestal (2D+1F) -

xiv Keyboard tray -

67.0 Library,Runing Workstation: 900 X 600 X1241 mm ( Factory made) Nos. 5

20swg CRCA metal body with MDF drawer fascia / Pre-Laminated type MPD includes

handle, single key lockable mechanism, 4nos. Lockable castors, pencil tray etc.

Articulated type / Standard ABS plastic or MDF tray with sliding telescopic channels.

Each wstn will have 1no. White board and 1nos. Pin-up board provision

25mm thk pre-lam board with PVC edging / bull nosed beading of matching table top color.

Client : M/S National Productivity Council,Chennai 37 of 41 Architect: M/S.Nanda & Associates,Chennai

S.NO DESCRIPTION OF WORK UNITQTYNos.

Rate/ Unit [ Figures]

Rate/ Unit [ Words] AMOUNT - Rs.

68.0

Modular Table 25mm thk pre-lam board with PVC edging / bull nosed beading of matching table top color. any Size of - 1 NO. Metal Modesty & I-type support legs with wire management provision. 1nos. Flip type Popup box provision to terminate the electrical & data points. Keyboard tray ( Factory made)

68.1 Meeting Room Table: 4500x1500x750 mm ( Factory made) Nos. 1

68.2 Libraryan Table: 2100x900x750mm ( Factory made) Nos. 1

68.3 Library reading Table: 2400x900x750mm ( Factory made) Nos. 1

68.4 Side Table: 1200x450x750mm Libraryan, ( Factory made) Nos. 2

Client : M/S National Productivity Council,Chennai 38 of 41 Architect: M/S.Nanda & Associates,Chennai

S.NO DESCRIPTION OF WORK UNITQTYNos.

Rate/ Unit [ Figures]

Rate/ Unit [ Words] AMOUNT - Rs.

B SEATING:

69.0

EPPY Medium back chair - Fix. PU Arms Glass Filled Nylon Base, Gaslift, Twin Wheels Nylon Castros, Fixed PU Chrome Arms, Seat: PU Mouleded Cushion Back: Twinply with high density Cushion ( Factory made)

69.1 Meeting Room Nos. 13

70.0

EPPY Visitor Chair Black Powder Coated Sledge Base Fixed PU Arms Seat: PU Mouleded Cushion Back: Twinply with high density Cushion.( Factory made)

70.1 Viisitors chairs Nos. 26SOFA WORK ( Factory made)

71.0Providing and fixing sofa set to detail asshown in drawing

71.1 Three seater Sofa Nos. 2

71.2 Two seater Sofa Nos. 2

71.3 One seater Sofa Nos. 2

Client : M/S National Productivity Council,Chennai 39 of 41 Architect: M/S.Nanda & Associates,Chennai

S.NO DESCRIPTION OF WORK UNITQTYNos.

Rate/ Unit [ Figures]

Rate/ Unit [ Words] AMOUNT - Rs.

72.0

High back chair with - Fix. PU Arms Glass Filled Nylon Base, Gaslift, Twin Wheels Nylon Castros, Fixed PU Chrome Arms, Seat: PU Mouleded Cushion Back: Twinply with high density Cushion Upholstery & Netted Back. adjustment, ( Factory made)

72.1 Officer chairs Nos. 10

Total ( All Taxes Included)

GRAND TOTAL in Rs.

Client : M/S National Productivity Council,Chennai 40 of 41 Architect: M/S.Nanda & Associates,Chennai

S.NO DESCRIPTION OF WORK Unit QTYRate/ Unit [ Figures]

Rate/ Unit [ Words] Amount in Rs.

A FURNITURE:

73.0Existing Wooden door frame Shutter, Old Electrical Fittings and Wires L/S

74.0 Aluminum windows SqM 64.80

75.0 Existing Plumbing GI Pipes L/S

76.0 Existing Plumbing PVC Pipes L/S

GRAND TOTAL in Rs.

Note : Quoted amount will be deducted from the Total Project cost

(2) . The Rtaes Quoted in Figure and Words Whichever is less will only be considered for tender analysis.

(3) . Overwriting in rates should be avoided.

(4) . Corrections in rates should be attested by the bidder or by their authorized signatory.

CLIENT : NATIONAL PRODUCTIVITY COUNCIL AT AMBATTUR,CHENNAI.

PROJECT : PROPOSED COMPOSITE CONTRACT FOR CIVIL, INTERIOR, ELECTRICAL AND MODULAR WORKS IN GROUND FLOOR OF MAIN BUILDING AT NPC, AMBATTUR, CHENNAI FOR LIBRARY, CLASS ROOM ETC.,

SUBJECT : ADMIN BLOCK FIRST FLOOR - BUYBACK ITEMSNote : (1) . The Quoted Rates Should be Inclusive of All taxes

Client : M/S National Productivity Council,Chennai 41 of 41 Architect: M/S.Nanda & Associates,Chennai