Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
T40140 T40180 STAGE IIIBTELESCOPIC HANDLERS
2
HIGHER – STRONGER – BETTER…
The new 14m and 18m Bobcat® telescopic handlers provide you with what matters most – ease-of-use, safety and performance. Simplicity in design make these telescopic handlers easy to use. State-of-the-art safety systems and class-leading performance give you 100% confidence in the machine. The T40140 and T40180 work with the best possible efficiency and productivity, with a constant focus on safe operation.
Optimum Safety
Unique integrated frame-levelling and
side-shift system for use on both tyres
and stabilizers.
Full flexibility
A complete set of attachments provides
full flexibility and job compatibility.
Maximum uptime
Side-mounted engine
and easy-to- access
maintenance points
for fast service and
maintenance.
3
Total visibility
Rounded cab design
features large front
and rear windows to
maximise all-round
visibility.
An ideal ergonomic workspace
Logically designed and positioned
controls provide greater comfort, control
and productivity.
Higher reach
Minimal loss of lift height between
operating on tyres and on stabilizers.
Compactness equals access
Compact stabilizers ensure full
capabilities can be used in even the
most confined areas.
4
An easy-to-use machine means better performance, higher productivity and, ultimately, safer operation. The T40140 and T40180 are models of simplicity, with a wide range of features.
SIMPLICITY
Ergonomics
The ergonomic controls are within arm’s
reach, providing an extra level of safety and
operational control.
• FNR control button on the joystick
• Electronic dashboard
• Adjustable steering wheel
• Integrated airflow solution
FNR on Joystick puts maximum control at your fingertips. Select
the driving direction at the touch of a button, while still keeping
a grip on both the steering wheel and the joystick for improved
safety and productivity.
Information at your fingertips
• Continuous frame-levelling angle on LCD display - when
levelling function is activated, the LCD screen automatically
shows the angle to keep you fully aware of machine
parameters.
• Boom angle value available on the LCD screen promotes
precision movements and faster work-cycles for repetitive tasks.
• Semi-automatic wheel alignment helps make sure the wheels
are always aligned when you change between the 3 steering
modes.
• Aux flow control is easily and precisely controlled from the
joystick.
• Stabilizer detection on ground - sensor continuously monitors
the pressure to prevent drops/leaks and ensure safe stab usage
at all times.
5
Spacious environment
The new cab is designed with the operator in mind. Providing an exceptional level of comfort to keep you more alert
and improve the safety of the work site.
Total visibility
The rounded cab design features a large front window to
maximise visibility of the attachment – at any height or reach.
Large rear window ensures maximum rear visibility, increasing
your spatial awareness and the accuracy of rear movements.
The design of the protective roof grid provides maximum
protection while ensuring that the attachment is visible at full
height.
6
CONFIDENCE… IN YOUR BOBCAT TELEHANDLERAttention to details … improving Quality, Reliability & DurabilityThe new T40140 and T40180 models provide a new level of confidence…in the machine’s performance and safety,
and in its robustness. This is achieved by applying the rigorous Bobcat® development standards across all functions
on the new models.
• New generation cooling package ensures smooth and stable
control of the hydraulic oil temperature and hydraulic hose life
optimisation.
• Complete protection of the tilt cylinder within the boom head
ensures minimum risk of damage and increased operator
safety.
• Integrated boom head design provides reinforcement to
handle heavy lifting while also providing added peace-of-mind
when operating from a man platform.
• New generation wear pads, larger bolts, larger steel inserts to
benefit from increased friction coefficient.
• Safe and smooth management of over-speed to ensure
maximum durability and uptime.
7
Safety
The load management system on the new
T40140 and T40180 ensures safe operation
at all times – regardless of the load.
The display – positioned for maximum
visibility – provides continuous clear
information on load management.
Side Shift
Unique integrated frame-levelling and side-
shift system works independent
of the main frame to provide ± 4° bank-
angle on tyres and up to ± 12° angle on
stabilizers. The system ensures maximum
flexibility and up to ± 700 mm side shift at
full extension.
8
PERFORMANCE… HOW TO MAKE THE GOOD EVEN BETTER!Compactness = access
Easy-to-use compact stabilizers ensure that
the T40180’s full capabilities can be used in
the most confined working areas.
3 steering modes provide a solution for any
movement.
You can easily manoeuvre into hard-to-
reach areas with the short turning radius.
9
Reaching higher than ever - both on tires
and on stabilizers.
We believe a high-reach machine should
not have limitations! The
T40180 provides top-class stability, ensuring
minimal loss of lift height and capacity
when operating on tires
With a top speed of 30 km/h, the new
models can quickly move between
locations, reducing travel times.
10
ENGINE EMISSIONS
The Stage IIIB standards offer us another opportunity to provide
high-performance, reliable and cost-effective solutions…
that operate with minimal impact on human health and the
environment.
To provide the best solution in terms of technology and customer
benefits, we are launching our Stage IIIB models with a DOC-only
system for ultra-low engine exhaust emissions in conjunction with
an optimized open after-treatment system.
• DOC-only solution for cleaner exhaust
• No extra fuel burn required
• Maintenance-free system
• No down-time
The new T40140 and T40180 models are available with Stage IIIB
(Tier 4i) for European markets.
Maintenance
Improved serviceability: active monitoring
of machine systems, with real-time
information provided for diagnostics.
• Battery located in engine basket for easy
access. Electric switch ensures that the
battery is not accidentally left connected
overnight
9.2
6.64
20.4
0.02
0.2
0.54
11
T40140 T40180 — SPECIFICATIONS
T40180 3B TelescopicsSpecifications
B33G 11001 — B33G 99999 • 2013-10-21 • ©2013 Bobcat EMEA - www.bobcat.euSpecifications are subject to change without notice - Pictures of Bobcat units may show other than standard equipment
PerformanceLifting height — on stabilisers 17500.0 mmLifting height — on tyres 16200.0 mmRated capacity 4000 kgCapacity (at max. height on stabilisers) 2500 kgCapacity (at max. height on tyres) 1000 kgCapacity (at max. reach on stabilisers) 560 kgCapacity (at max. reach on tyres) 0 kgMax. reach on stabilisers 13700.0 mmMax. reach on tyres 12800.0 mmCrowding force 4900 daN
WeightsWeight (unladen) 10790 kg
TractionStandard tyres 400/80x24Low speed (forward/reverse) 8.5 km/hHigh speed (forward/reverse) 30.0 km/hDriving modes Direct drive / soft drive
Drive SystemMain drive Hydrostatic motorTransmission Hydrostatic with electronic regulation
EngineMake / Model DEUTZ / TCD 3.6 L4Fuel DieselCooling LiquidRated power (ISO 14396) at 2300 RPM 74.4 kWMaximum torque at 1600 RPM 410.0 NmNumber of cylinders 4Displacement 3.62 L
Hydraulic SystemPump type Gear pump with LS valveCombined pump capacity 100.00 L/min
Cycle TimesLift time - no load 12.8 sLower time - no load 8.4 sTelescope in time at max. reach - no load 20.3 sTelescope in time at max. height - no load 17.7 sTelescope out time at max. reach - no load 29.0 sTelescope out time at max. height - no load 29.0 s
BrakesEngine braking HydrostaticParking and emergency brake Negative brake with hydraulic command
Fluid CapacitiesAxles and reduction gears front / rear 9.1/9.1 LFuel tank 145.00 LHydraulic reservoir [HYDRAULIC] 76.00 L
Standard FeaturesAggravating Movements Arrester (AMA)Hydrostatic transmissionROPS/FOPS operator cabHeating, demisting and ventilationFront and rear washer/wipersSuspension seatRoad lightsTurn signals
Right and left side mirrorsTwo way hydraulic supply at the end of the boomMudguardsTurbo-charged engine - Perkins Stage 3ANarrow hook-up for mounting of the equipmentMechanical lock of the equipmentFour 400/80x24 tyresTransmission lock override
EnvironmentalSound pressure level (LpA) 79 dB(A)Level of acoustic power (LWA) 106 dB(A)Whole body vibration (ISO 2631–1) 0.29 ms-2
Load ChartsWith forks and standard 400/80x24 tyres, on stabilisers
Complies with stability test EN1459 Ennex B
Dimensions
(-) 16°(-) 109°(A) 7425.0 mm(B) 6164.0 mm(E) 2670.0 mm(F) 2476.0 mm(G) 124°(J) 500.0 mm
(M) 2850.0 mm(O) 930.0 mm(P) 1992.0 mm(Q) 2394.0 mm(R) 5822.0 mm(S) 3782.0 mm(U) 1761.0 mm
OptionsAir conditioningAir suspension seatAuxiliary line on boomwitch ACD and electricconnectorsBack up alarmBasic tow hitchBoom stopCarriage with hydraulicattachment lockCold startCustom colourCyclonic air prefilterDouble right rear viewmirrorDrawbar coupler tow hitchFan inverterFire extinguisherLockable fuel cap
Man platform predispositionMultifunctional remotecontrolNo forward/reverse controlon joystickPintle tow hitchRadio readyRear flat mirrorRoof window wiperRotating beaconSun visorSupport for registrationplateWindscreen grillWork light on boomWheel wedgeWinch ready
T40140 3B TelescopicsSpecifications
B33H 11001 — B33H 99999 • 2013-10-21 • ©2013 Bobcat EMEA - www.bobcat.euSpecifications are subject to change without notice - Pictures of Bobcat units may show other than standard equipment
PerformanceLifting height — on stabilisers 13600.0 mmLifting height — on tyres 13300.0 mmRated capacity 4100 kgCapacity (at max. height on stabilisers) 4100 kgCapacity (at max. height on tyres) 2500 kgCapacity (at max. reach on stabilisers) 1250 kgCapacity (at max. reach on tyres) 500 kgMax. reach on stabilisers 9800.0 mmMax. reach on tyres 9800.0 mmCrowding force 5200 daN
WeightsWeight (unladen) 10290 kg
TractionStandard tyres 400/80x24Low speed (forward/reverse) 8.5 km/hHigh speed (forward/reverse) 30.0 km/hDriving modes Direct drive / soft drive
Drive SystemMain drive Hydrostatic motorTransmission Hydrostatic with electronic regulation
EngineMake / Model DEUTZ / TCD 3.6 L4Fuel DieselCooling LiquidRated power (ISO 14396) at 2300 RPM 74.4 kWMaximum torque at 1600 RPM 410.0 NmNumber of cylinders 4Displacement 3.62 L
Hydraulic SystemPump type Gear pump with LS valveCombined pump capacity 100.00 L/min
Cycle TimesLift time - no load 12.8 sLower time - no load 8.4 sTelescope in time at max. reach - no load 12.9 sTelescope in time at max. height - no load 11.3 sTelescope out time at max. reach - no load 18.8 sTelescope out time at max. height - no load 18.8 s
BrakesEngine braking HydrostaticParking and emergency brake Negative brake with hydraulic command
Fluid CapacitiesAxles and reduction gears front / rear 9.1/9.1 LEngine oil 8.00 LFuel tank 145.00 LHydraulic reservoir [HYDRAULIC] 76.00 L
Standard FeaturesAggravating Movements Arrester (AMA)Hydrostatic transmissionROPS/FOPS operator cabHeating, demisting and ventilationFront and rear washer/wipersSuspension seatRoad lightsTurn signals
Right and left side mirrorsTwo way hydraulic supply at the end of the boomMudguardsTurbo-charged engine - Perkins Stage 3ANarrow hook-up for mounting of the equipmentMechanical lock of the equipmentFour 400/80x24 tyresTransmission lock override
EnvironmentalSound pressure level (LpA) 79 dB(A)Level of acoustic power (LWA) 106 dB(A)Whole body vibration (ISO 2631–1) 0.29 ms-2
Load ChartsWith forks and standard 400/80x24 tyres, on stabilisers
Complies with stability test EN1459 Ennex B
Dimensions
(-) 16°(-) 109°(A) 7313.0 mm(B) 6052.0 mm(E) 2670.0 mm(F) 2476.0 mm(G) 124°(J) 500.0 mm
(M) 2850.0 mm(O) 930.0 mm(P) 1992.0 mm(Q) 2394.0 mm(R) 5720.0 mm(S) 3782.0 mm(U) 1761.0 mm
OptionsAir conditioningAir suspension seatAuxiliary line on boomwitch ACD and electricconnectorsBack up alarmBasic tow hitchBoom stopCarriage with hydraulicattachment lockCold startCustom colourCyclonic air prefilterDrawbar coupler tow hitchFan inverterFire extinguisherLockable fuel capMan platform predisposition
Multifunctional remotecontrolNo forward/reverse controlon joystickPintle tow hitchRadio readyRear electric auxiliaryRear flat mirrorRoof window wiperRotating beaconSun visorSupport for registrationplateWindscreen grillWork light on boomWheel wedgeWinch ready
T40140 T40180
PERFORMANCEMaximum Lift Capacity kg 4100 4000
Maximum Lift Height (on tyres / on stabilizers) mm 13300 / 13600 16200 / 17500
Maximum Forward Reach (on tyres / on stabilizers) mm 9800 / 9800 12800 / 13700
Lift Capacity at Full Height (on tyres / on stabilizers) kg 2500 / 4000 1000 / 2500
Lift Capacity at Full Reach (on tyres / on stabilizers) kg 500 / 1300 0 / 560
Tilt Crowding Force daN 12300
WEIGHTSWeight (unladen) kg 10290 10790
ENGINEStage IIIB
Make / Model DEUTZ TCD 3.6 L4
Fuel / Cooling DIESEL / Water
Rated Power (ISO 14396) at 2300 RPM kW (HP) 74.5 (100)
Maximum Torque at 1600 RPM Nm 410
Number of Cylinders 4
Displacement l 3.6
TRACTIONStandard Tyres Basic Option Tyres 400/80-24"
Low Speed (forward / reverse) km/h 8.5
High Speed (forward / reverse) km/h 30
Driving Modes 2WS / 4WS / CRAB
DRIVE SYSTEM
Transmission Hydrostatic with electronic regulation
Main Drive Hydrostatic motor
HYDRAULIC SYSTEMPump Type Gear pump with LS valve
Combined Pump Capacity l/min 100
Working Pressure bar 255
BRAKESService Brake Oil immersed discs
Parking and Emergency Brake Negative brake with hydraulic command
DIMENSIONS
T40180 3B TelescopicsSpecifications
B33G 11001 — B33G 99999 • 2013-10-21 • ©2013 Bobcat EMEA - www.bobcat.euSpecifications are subject to change without notice - Pictures of Bobcat units may show other than standard equipment
PerformanceLifting height — on stabilisers 17500.0 mmLifting height — on tyres 16200.0 mmRated capacity 4000 kgCapacity (at max. height on stabilisers) 2500 kgCapacity (at max. height on tyres) 1000 kgCapacity (at max. reach on stabilisers) 560 kgCapacity (at max. reach on tyres) 0 kgMax. reach on stabilisers 13700.0 mmMax. reach on tyres 12800.0 mmCrowding force 4900 daN
WeightsWeight (unladen) 10790 kg
TractionStandard tyres 400/80x24Low speed (forward/reverse) 8.5 km/hHigh speed (forward/reverse) 30.0 km/hDriving modes Direct drive / soft drive
Drive SystemMain drive Hydrostatic motorTransmission Hydrostatic with electronic regulation
EngineMake / Model DEUTZ / TCD 3.6 L4Fuel DieselCooling LiquidRated power (ISO 14396) at 2300 RPM 74.4 kWMaximum torque at 1600 RPM 410.0 NmNumber of cylinders 4Displacement 3.62 L
Hydraulic SystemPump type Gear pump with LS valveCombined pump capacity 100.00 L/min
Cycle TimesLift time - no load 12.8 sLower time - no load 8.4 sTelescope in time at max. reach - no load 20.3 sTelescope in time at max. height - no load 17.7 sTelescope out time at max. reach - no load 29.0 sTelescope out time at max. height - no load 29.0 s
BrakesEngine braking HydrostaticParking and emergency brake Negative brake with hydraulic command
Fluid CapacitiesAxles and reduction gears front / rear 9.1/9.1 LFuel tank 145.00 LHydraulic reservoir [HYDRAULIC] 76.00 L
Standard FeaturesAggravating Movements Arrester (AMA)Hydrostatic transmissionROPS/FOPS operator cabHeating, demisting and ventilationFront and rear washer/wipersSuspension seatRoad lightsTurn signals
Right and left side mirrorsTwo way hydraulic supply at the end of the boomMudguardsTurbo-charged engine - Perkins Stage 3ANarrow hook-up for mounting of the equipmentMechanical lock of the equipmentFour 400/80x24 tyresTransmission lock override
EnvironmentalSound pressure level (LpA) 79 dB(A)Level of acoustic power (LWA) 106 dB(A)Whole body vibration (ISO 2631–1) 0.29 ms-2
Load ChartsWith forks and standard 400/80x24 tyres, on stabilisers
Complies with stability test EN1459 Ennex B
Dimensions
(-) 16°(-) 109°(A) 7425.0 mm(B) 6164.0 mm(E) 2670.0 mm(F) 2476.0 mm(G) 124°(J) 500.0 mm
(M) 2850.0 mm(O) 930.0 mm(P) 1992.0 mm(Q) 2394.0 mm(R) 5822.0 mm(S) 3782.0 mm(U) 1761.0 mm
OptionsAir conditioningAir suspension seatAuxiliary line on boomwitch ACD and electricconnectorsBack up alarmBasic tow hitchBoom stopCarriage with hydraulicattachment lockCold startCustom colourCyclonic air prefilterDouble right rear viewmirrorDrawbar coupler tow hitchFan inverterFire extinguisherLockable fuel cap
Man platform predispositionMultifunctional remotecontrolNo forward/reverse controlon joystickPintle tow hitchRadio readyRear flat mirrorRoof window wiperRotating beaconSun visorSupport for registrationplateWindscreen grillWork light on boomWheel wedgeWinch ready
(A) 7313.0 mm(B) 6052.0 mm(E) 2670.0 mm(F) 2476.0 mm
(G) 124°(J) 500.0 mm
(M) 2850.0 mm(O) 930.0 mm
(P) 1992.0 mm(Q) 2394.0 mm(R) 5720.0 mm(S) 3782.0 mm(U) 1761.0 mm
(A) 7425.0 mm(B) 6164.0 mm(E) 2670.0 mm(F) 2476.0 mm
(G) 124°(J) 500.0 mm
(M) 2850.0 mm(O) 930.0 mm
(P) 1992.0 mm(Q) 2394.0 mm(R) 5822.0 mm(S) 3782.0 mm(U) 1761.0 mm
DI CE - Drève Richelle 167 - B-1410 Waterloo, Belgium
Spec
ifica
tions
and
des
ign
are
subj
ect t
o ch
ange
with
out n
otic
e. P
ictu
res
of B
obca
t pro
duct
s m
ay s
how
oth
er th
an s
tand
ard
equi
pmen
t.
©2013 BOBCAT B4474590-EN (11-13)
T40140 T40180 — SPECIFICATIONS
OPTIONS T40140 T40180Air conditioning x x
Air suspension seat x x
Auxiliary line on boom with ACD and electric connectors x x
Back-Up alarm x x
Basic tow hitch x x
Boom light x x
Boom stop x x
Carriage with hydraulic attachment lock x x
Cold start x x
Cyclonic air prefilter x x
Document holder (PVC) x x
Drawbar coupler tow hitch x x
Fan inverter x x
Fire extinguisher x x
Forward/Reverse control on steering wheel lever x x
Lockable fuel cap x x
Manplatform Installation x x
Michelin tyres - set of 4 x 400/80-24" x x
Multifunctional remote control x x
Custom colour x x
Pintle tow hitch x x
Protective grill for windshield x x
Protective zinc coat x x
Radio ready x x
Rear electric auxiliary x x
Rear flat mirror x x
Roof window wiper x x
Rotating beacon x x
Sun visor x x
Support for vehicle registration plate x x
Wheel wedge x x
Winch Installation x x
ATTACHMENTS T40140 T40180 Digging Bucket w/o teeth x x
Digging Bucket w/ teeth x x
Concrete Bucket, hydraulic x x
Concrete Bucket, mechanic x x
Rigid Pallet Forks Frame x x
Rigid Pallet Forks Frame w/Backrest x x
Floating Pallet Forks, 1,12m wide x x
Floating Pallet Forks, 1,44m wide x x
Jib 4.1t, 0.7m x x
Jib 0.7t , 3.7m x x
Winch 4.1t x x
Winch w/ Jib 600 kg x x
Winch w/ Jib 1000 kg x x
Man Platform, extendable, rotatable, 4m x x
Man Platform , fixed, 1m x x