Embed Size (px)
Citation preview
Mueller Electric Cable Division 1208 Massillon Road
full text of the “Terms & Conditions” of the Warranty
Warranty
Telecom and Electronics T
Test and Measurement Probe
BU-00285 Insulated mini-Alligator Lead Set
BU-00287 Insulated Alligator Lead Set
Popper JP Tensil-2 LarNose T
BU-7042-F-**-*Dual Tipped Test Leadto a Dual Banana Plug
BU-1150-C-**-*Mini Plunger to BNCMale with RG58
Back Probes For Electrical TestingJP-491-* (-0 Black /-2Red) Small Back ProbeJP-591-* (-0 Black /-2Red) Large Back ProbeFits any 4MM Banana Test Lead
MuellerElectric.com T: 800-955-2629 T: 216-771-5225 F: 216-771-3068 [email protected]
With 112 years in business, quality is still #1. Mueller products are manufactured to our own higher standards, creating products that are rugged and durable and providing an excellent value.
A DESCO CORPORATION COMPANY SINCE 2011
Instrumentation Products
Mueller Electric Instrumentation Division 2850 Gilchrist Rd. Building 5A, Akron, OH 44305
Phone: 800-955-2629 E-mail: [email protected]
Akron OH 44306
About Mueller Electric
In 1908, Ralph Mueller invented the “alligator clip.” Ever since Mueller Electric has been synonymous with the highest quality, durability, and reliability in the industry. In 2011 Desco Corporation acquired Mueller and vowed to maintain the tradition and service established during the past century. Desco Corporation is a privately held company with global manufacturing, distribution and sales employing over 1,200 people. For further information please visit us at www.descocorporation.com.
With 112 years in business, QUALITY remains our number one focus. Manufacturing to the highest standards Mueller Electric has facilities located in Akron, OH, USA; Nottingham, UK; and Shanghai, China to meet the demands of any cable manufacturing requirement. This diversity allows Mueller Electric to offer short lead times, fast responses, and engineering support, along with tremendous cost saving opportunities and domestic stocking programs.
ement
• Overmolding, potting, encapsulation• Industrial Automation• Military• Telecom, Data Communications• RF applications
es custom cable configurations to the following markets and is expanding
BNC / Coaxial Applications
craft Grounding Cables and Clips
Custom aircraft grounding cable BU-25C Clip 75 Amps
BU-5114-A-4-0BNC Male Breakout toMini-Micro-Grabbers
BU-5330-F-**-0 (*Various Lengths Available) Insulated Alligator Clips to Male BNC with RG174
BU-5070-B-**-0 (Various Lengths Available) Male BNC to Stackable Double Banana Plug
Grounding Straps with BU-27 Steel Clips
Section A: About Us
2850 Gilchrist Rd. Building 5A, Akron, OH 44305 Phone: 800-955-2629 E-mail: [email protected]
Section B: What We Offer
Mueller Electric serves the industrial automation and automotive industries and offers a selection of 300+ instrumentation cables for a wide range of uses. Different types of instrumentation cables include Nanos, Minis and Micros; M12s, M8s and M5s; Robotic; Control; Coaxial; Motor; and many more.
Mueller Electric manufacturers high-
quality instrumentation cables that are less
expensive than Allen Bradley or Turck. If you are having
lead-time and cost-competitiveness issues, Mueller can step right in.
Contact Mueller Electric if you are manufacturing automated equipment or want to keep the machines you have running in a budget-friendly environment. Our focus is on providing top-quality products at a great value for our customers in today’s complex industrial climate.
Mueller Electric Instrumentation Division 2850 Gilchrist Rd. Building 5A, Akron, OH 44305
Phone: 800-955-2629 E-mail: [email protected]
Section C: M12 Cables
NEW M12, M8 & M5 INSTRUMENTATION CABLES ARE DESIGNED TO EVOLVE WITH ADVANCEMENTS IN INDUSTRIAL AUTOMATION
As industrial automation continues to advance more and more equipment will require components such as sensors, actuators, frequency converters, motor operated switches and more. M12 instrumentation cables from Mueller Electric will fill all the connection needs.
Mueller’s M12, M8 and M5 cables offer 3, 4, 5, 8 and 12 position male and female assemblies in straight and right-angle molding types for a wide range of factory-automation connection requirements and are versatile and easy to install.
M12 Instrumentation cable assemblies from Mueller Electric are available in Polyurethane, PVC and PUR insulations and can serve A-coding, B-coding, D-coding and X-coding applications from stock. A wide range of sizes are available from 3 feet to65 feet, giving you the flexibility to obtain the right custom cable assemblyperfect for your instrumentation applications.
Mueller Electric Instrumentation Division 2850 Gilchrist Rd. Building 5A, Akron, OH 44305
Phone: 800-955-2629 E-mail: [email protected]
Section D: Types of Connectors
MICRO-DC / M12 -- A-CodingThe Micro-DC (MDC) series, perhaps known better as micro-changes or M12, is one of the most widely used industrial quick disconnects by the industrial market. These connectors can be used in both AC or DC applications. Uses of M12s in industrial automation are limitless, but are commonly used in factory automation for sensors, actuators, motors, switches, safety light curtains and mats, and interlock switches.
EURO-AC -- B-CodingThe EURO AC (MEC) series has a reversed single keyway which is known as B-code. This allows 2 unique M12 connectors to be mounted on the same panel without fear of incorrectly coupling connectors to equipment with varying voltage and amperages.
MICRO-AC -- C CodingThe MICRO-AC (MAC) series uses a ½”-20 mating thread and has a first make last break extended ground pin. The use of a double keyway (C-code) prevents it from accidentally plugging into one of the other similarly-sized connectors.
ETHERNET -- D-CodingM12 Ethernet series (MDE45) utilizes 4 wire (D-code) connectors with 2 pair Cat 5e cables or M12 8 wire (A-code) connectors with 4 pair Cat 5e cable. The MDE45 is specifically used in industrial Ethernet applications, and has real cable using twisted pairs of wires inside. D-code is for 100Mbit Ethernet.
ETHERNET -- X-CodingX-coded instrumentation cables are becoming more popular as they are used inEthernet 10 Gbit environment. The X-coded type connection is becoming more andmore popular for high-speed industrial Ethernet and will eventually replace the A- andD-coded parts for Ethernet applications.
Circular M12 and 1/2"-20 cordsets and receptacles are available in a variety of pin configurations and wire color codes.
Mueller Electric Instrumentation Division 2850 Gilchrist Rd. Building 5A, Akron, OH 44305
Phone: 800-955-2629 E-mail: [email protected]
Section E: Standards & Ratings
Mueller Electric's circular instrumentation cables meet IEC standards and carry an IP67 waterproofing rating or higher which means they can handle tough environmental conditions. Being dust-tight and submersible to 1 meter in water for up to 30 minutes, these cables can perform in a wide range of applications on land and around water. Each cable is quality-made and tested, allowing you to use them with assurance in conditions that involve dust or humid and wet conditions.
Section F: Fast Shipping
Complete Projects With Assurance With Mueller Electric's Waterproof Instrumentation Cables With IEC
Ratings
Get High-Quality, Ready-To-Ship Instrumentation Cables FAST For Your Next Big Job
With a high degree of mechanical and electrical stability, our M12, M8 and M5 cables provide a cost efficient and flexible plug-and-play connectivity solution for onsite installations. This decreases downtime in process control and industrial automation applications.
Mueller Electric Instrumentation Division 2850 Gilchrist Rd. Building 5A, Akron, OH 44305
Phone: 800-955-2629 E-mail: [email protected]
Akron OH 44306
ement
• Overmolding, potting, encapsulation• Industrial Automation• Military• Telecom, Data Communications• RF applications
es custom cable configurations to the following markets and is expanding
BNC / Coaxial Applications
craft Grounding Cables and Clips
Custom aircraft grounding cable BU-25C Clip 75 Amps
BU-5114-A-4-0BNC Male Breakout toMini-Micro-Grabbers
BU-5330-F-**-0 (*Various Lengths Available) Insulated Alligator Clips to Male BNC with RG174
BU-5070-B-**-0 (Various Lengths Available) Male BNC to Stackable Double Banana Plug
Grounding Straps with BU-27 Steel Clips
Section H: Custom Orders
Email: [email protected]
CHECK OUT OUR ONLINE INSTRUMENTATION CONFIGURATION CATALOG HERE, OFFERING HUNDREDS OF CABLES FOR ANY USE.
Use the Cable Configuration Key on page 2 to select the cable you need.
STILL DON'T SEE WHAT YOU'RE LOOKING FOR?
WE ALSO CREATE CUSTOM CABLE ASSEMBLIES FOR YOUR SPECIFIC NEEDS. CONTACT MUELLER ELECTRIC TO DISCUSS YOUR REQUIREMENTS.
Phone: 800.955.2629
2850 Gilchrist Rd. Building 5A, Akron, OH 44305 Phone: 800-955-2629 E-mail: [email protected]
Section I: Custom Orders
BENEFITS TO BUYING CABLES FROM MUELLER ELECTRIC
• Lower cost than Turck or Allen Bradley cables
• Faster delivery than Turck or Allen Bradley cables
• ALL types of instrumentation cables available: M12, M8 and M5; Flexible; Robotic; Control; Coaxial; Motor & Others
• Cables work with sensors, actuators, frequency converters, motor-operated switches and more
• ALL cables have IP67 or IP68 minimum dustproof or waterproof ratings
• Available in 3, 4, 5, 8 and 12 position male and female assemblies in straight and right-angle molding types (for a wide range of factory-automation connection requirements)
• Available in Polyurethane, PVC and PUR insulations
• Can serve A-coding, B-coding, D-coding and X-coding applications from stock
• Available in a wide range of sizes from 3 feet to 65 feet, allowing you the flexibility to create the perfect custom-cable assemblies
• Flexible plug-and-play connectivity solution for onsite installations, decreasing downtime in process control and industrial-automation applications
• Industry-standard, screw-locking mechanisms
• WE CREATE CUSTOM INSTRUMENTATION CABLE ORDERS!
