4
The track gauge is designed for geometry measurements of track and switches. The gauge has all features of the TEC one and, in addition, makes it possible to measure all geometrical parameters of switches specified by pertinent regulations. The measurement results are stored in a continuous way along the measurement path, and moreover, at the user-defined switch characteristic points one can easily obtain readings for all parameters at a given location. The system software maintains integrity control of all measurement data for a given switch type. 1. Basic technical specification of the track gauge in the switch measurement mode: - measurement of all switch types used in Poland and The Netherlands - mileage measurement increment 31 mm - measurement of groove widths: left and right - gauge - range: 1420÷1485; resolution: 0.1 mm - cant - range: ±200 mm; resolution: 0.1 mm - vertical irregularities - range: ±4 mm / 1 m; resolution 0.1 mm - horizontal irregularities - range: ±5 mm / 1 m; resolution 0.1 mm - the measurement system calculated twist of the track, gradient of the track gauge, twist of the switch, and location of the left and right check rails. 2. The PC software delivered along with the device makes it possible, among others, in addition to options offered by the TEC-1435 device, generating the detailed measurement reports for the switches. Switch condition quality assessment is also carried out. The gauge has many operational advantages. Low weight (about 20 kg) makes fast removal from the track possible to let the train pass, next, immediate continuation of the measurements is possible without any calibration. The track gauge may be folded easily and transported even in a small car. TEE-1435 Track Gauge for Switches ECS Groenwal 25 NL-5301 JJ Za The Netherlan altbommel nds Tel: +31 Fax: +31 Email: info Internet: 418 516369 418 516372 o@esveld.com http://www.esv veld.com IBAN: NL68 SWIFT: RAB Vat (btw): N Trade reg: 8 RABO 03743 7 BO NL 2U NL 009598200B 11021615 Tiel 75666 B01

TEE-1435 Track Gauge for Switches · ul. Karola Miarki 12, 44-100 Gliwice, Title: TEE(en) 1-4 str.pdf Author: Coenraad Esveld Created Date: 4/11/2011 4:45:47 PM

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: TEE-1435 Track Gauge for Switches · ul. Karola Miarki 12, 44-100 Gliwice, Title: TEE(en) 1-4 str.pdf Author: Coenraad Esveld Created Date: 4/11/2011 4:45:47 PM

P.U.T. GRAW sp. z o.o.ul. Karola Miarki 12, 44-100 Gliwice, POLAND

tel./fax 48(32) 231 70 91 e-mail: [email protected] www.graw.com+

The track gauge is designed for geometry measurements of track and switches. The gauge

has all features of theTECone and, in addition,makes it possible tomeasure all geometrical

parameters of switches specified by pertinent regulations. The measurement results are

stored in a continuous way along the measurement path, andmoreover, at the user-defined

switch characteristic points one can easily obtain readings for all parameters at a given

location. The system softwaremaintains integrity control of all measurement data for a given

switch type.

1. Basic technical specification of the track gauge in the switchmeasurementmode:

-measurement of all switch types used inPoland andTheNetherlands

-mileagemeasurement increment 31mm

-measurement of groovewidths: left and right

- gauge - range: 1420÷1485; resolution: 0.1mm

- cant - range: ±200mm; resolution: 0.1mm

- vertical irregularities - range: ±4mm / 1m; resolution 0.1mm

- horizontal irregularities - range: ±5mm / 1m; resolution 0.1mm

- the measurement system calculated twist of the track, gradient of the

track gauge, twist of the switch, and location of the left and right check

rails.

2. The PC software delivered along with the device makes it possible, among

others, in addition to options offered by the TEC-1435 device, generating the

detailed measurement reports for the switches. Switch condition quality

assessment is also carried out.

The gauge hasmany operational advantages. Lowweight (about 20 kg)makes fast removal

from the track possible to let the train pass, next, immediate continuation of the

measurements is possiblewithout any calibration. The track gaugemay be folded easily and

transported even in a small car.

TEE-1435 Track Gaugefor Switches

UNIA DLA PRZEDSI BIORCZYCHÊ

P R O G R A M K O N K U R E N C Y J N O Œ Æ

LASER

MEASUREMENT SYSTEMS

ECS

Groenwal 25 NL-5301 JJ ZaThe Netherlan

altbommel nds

Tel: +31 Fax: +31 Email: infoInternet:

418 516369418 [email protected]://www.esvveld.com

IBAN: NL68SWIFT: RABVat (btw): NTrade reg:

8 RABO 03743 7BO NL 2U NL 009598200B11021615 Tiel

75666

B01

Page 2: TEE-1435 Track Gauge for Switches · ul. Karola Miarki 12, 44-100 Gliwice, Title: TEE(en) 1-4 str.pdf Author: Coenraad Esveld Created Date: 4/11/2011 4:45:47 PM

TEE-1435 Track Gauge for Switches

Example of the measurement data analysis

LASER

MEASUREMENT SYSTEMS

Page 3: TEE-1435 Track Gauge for Switches · ul. Karola Miarki 12, 44-100 Gliwice, Title: TEE(en) 1-4 str.pdf Author: Coenraad Esveld Created Date: 4/11/2011 4:45:47 PM

P.U.T. GRAW sp. z o.o., POLAND, tel./fax +48 (32) 231 70 91, e-mail: [email protected], www.graw.comul. Karola Miarki 12, 44-100 Gliwice,

Page 4: TEE-1435 Track Gauge for Switches · ul. Karola Miarki 12, 44-100 Gliwice, Title: TEE(en) 1-4 str.pdf Author: Coenraad Esveld Created Date: 4/11/2011 4:45:47 PM

P.U.T. GRAW sp. z o.o., POLAND, tel./fax +48 (32) 231 70 91e-mail: [email protected], www.graw.com

ul. Karola Miarki 12, 44-100 Gliwice,