TECKNET UD026 Hard Drive Enclosure

Note:German and French language user manuals can be downloaded from our website: www.tecknet.co.uk.

WelcomeThank you for choosing this TECKNET product. To ensure optimum performance and safety, please read these instructions carefully before operating this product. It is strongly recommended you keep this manual for future reference.

Product Features1.Tool free design, easy to install and swap HDD2.High-quality plastic, galvanized steel material and exquisite workmanship3.Suitable for all 2.5” SATA HDD/SSD, support up to 9.5mm thickness HDD4.High speed interface and high compatibility5.Blue and red HDD working indicator6.Drive free, support Windows 2003/ XP /VISTA /Win 7 /Win 8 /Win 10 /Mac computer7.Plug and play, no need to restart computer8.Supports outsource input. User can input a 5V/1-2A connector (DC 3.5x1.35mm connector) to supply an extra power for UD026 when the power is not sufficient. The adapter is not included.

Product IntroductionTeckNet newly released UD026, tool free 2.5” HDD Enclosure, it features high-quality plastic, galvanized steel material and exquisite workmanship. It can support up to 9.5mm 2.5” HDD/SSD. It is the best choice for your data storage.

WarningBefore using this product for the first time, carefully read and follow all instructions and warnings.1.Before you exit the mobile device, please stop data R&W first; and you

cannot remove the mobile device during the process of data transmission. In order to avoid data loss, please strictly follow the above instructions.

2.Do not drop or knock this product or put it in damp environment or expose it directly in a high-temperature environment with direct sunlight

3.If your device or HDD Enclosure is damaged by improper use, demolition or operation not by following the instructions, our company will not be liable for any compensation or maintenance.

Package Contents1 x TeckNet UD026 HDD Case1 x Micro USB3.0/Mini USB2.0 Data Cable1 x User Manual1 x Warranty Card1 x Package Contents

Remove DeviceNote: Before you remove the device, please stop any data R&W processes first; otherwise, if you force-remove the device, it may damage the data.

1.Remove device from Windows OS: Click on the toolbar in the bottom right corner of the desktop, and the prompt of “Eject Data Traveler 2.0” will appear. Clicking the prompt will then show “Safely to Remove Hardware”. You can now remove the device safely. Alternatively, right-click My Computer → select Computer Management → Device Manager → Disk Drivers, click the disk needed to unload to uninstall your device safely.

2.Remove device from Mac OS: Select the mobile hardware icon, left-click and drag it to recycle bin, and you can safely remove mobile devices.

HDD Installation1.Push it according to the arrow direction to take off the cover.

2.According to the direction of the arrow as shown below, carefully push the hard disk into the slot of the 2.5 inch HDD enclosure.

3.Push the cover according to the arrow direction and finish installation.

Note：One piece of spongy cushion on the baseboard would protect the harddrive from damage.

4.Insert one end of USB data cable to the HDD enclosure, the other end connects to the computer. After find the device, the computer will appear “Safely Remove Hardware and Eject Media” and “Disk Management” as shown in below picture. Now you can use the HDD enclosure.

Product Specification

DisclaimerEvery effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

WarrantyWe warrant that product from authorized distributors will meet the applicable product specifications and be free from all defects in design, assembly, material and workmanship. Please contact TECKNET retailers, or visit our website for more information about the product.

Product NameProduct ModelProduct Material

Product DimensionProduct WeightInterface

HDD Thickness

Hot-swap

Support System

Safety Approval

Environment

2.5”SATA HDD External EnclosureTeckNet UD026Plastic + Galvanized steel

130(L)*83(W)*13(H)mm63.7g ( excluding HDD )USB3.0/USB2.0

Support up to 9.5mm

Support

Windows 2003/XP/VISTA/Win 7/Win 8/Win 10/Mac 9.0 or above

CE and FCC approval

Environment Operation temperature : 5℃～40℃Storage temperature : -20℃～70℃

spongy cushion

01

04 05

02

03