Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
TECHNOR ENGINEERING LTD 103/2015
EN ISO 9001:2008
No. : 010131138
www.technor.gr
TECHNOR Engineering Ltd
Company Presentation
TECHNOR ENGINEERING LTD 203/2015
EN ISO 9001:2008
No. : 010131138
THE COMPANY
TECHNOR Engineering was established in 1997, as a succession of her founders’ business activities since 1990.
TECHNOR is technology oriented to provide advanced products, integrated systems and innovative solutions in the following thematic fields:
Automation
Environmental Technologies
System Optimization Software
TECHNOR ENGINEERING LTD 303/2015
EN ISO 9001:2008
No. : 010131138
MARKET SECTORS
1 Water
2 Irrigation
3 Sewerage
4 Waste Water Treatment (WWT)
5 Solid Waste Plants (SWP)
6 Building Management System (BMS)
7 Tunnel Management System (TMS)
8 Industry*
* Food & beverage, energy, mines, petrochemical, gas, etc
TECHNOR ENGINEERING LTD 403/2015
EN ISO 9001:2008
No. : 010131138
ACTIVITIES
Design, consult,
study, audit
Project management
Software development
Supply, installation &
start-upTraining
After sales service
Technical support &
maintenance
TECHNOR ENGINEERING LTD 503/2015
EN ISO 9001:2008
No. : 010131138
HUMAN RESOURCES
TECHNOR’s strength and competitive advantage is the highly qualified and properly trained personnel.
18 people. The majority (over 80%) are engineers, software and hardware specialists, sales experts.
TECHNOR ENGINEERING LTD 603/2015
EN ISO 9001:2008
No. : 010131138
TECHNOLOGY PARTNERS
PcVue: Versatile HMI/SCADA software
Alert: Alarm management software
Dream Report: Real-time report generator
IntraVue: Diagnostiv and maintenance tool
Enterprise Historian: Acquire, store, retrieve, view, analyze
Automation System Human Machine Interface Industrial Communication
TECHNOR product
TECHNOR ENGINEERING LTD 703/2015
EN ISO 9001:2008
No. : 010131138
Industrial GSM/GPRS wireless modem & routers
Industrial wireless ETHERNET modem & device servers
Wireless SERIAL modems
Industrial wireless GATEWAYS
Wireless Input/Output (I/O)
Wireless HART
ETHERNET SWITCHES
NMS analysis software for Wired and Wireless Network Management System
ANTENNAS
TECHNOLOGY PARTNERS
TECHNOR ENGINEERING LTD 803/2015
EN ISO 9001:2008
No. : 010131138
Pressure transmitters
Submersible level transmitters
Temperature transmitters
Electromagnetic flow meters
Insertion electromagnetic flow meters
Clamp on ultrasonic flow meters (stationary and portable)
Battery powered flow measurement
Data loggers (flow, pressure, level, temperature, conductivity) including GSM/GPRS
TECHNOLOGY PARTNERS
TECHNOR ENGINEERING LTD 903/2015
EN ISO 9001:2008
No. : 010131138
TECHNOLOGY PARTNERS
Open channel ultrasonic flow meters
Ultrasonic & radar lever transmitters
Sludge blanket level measurement controllers
Pump controllers
Radar-, ultrasonic-, transit time-, cross correlation-measurement devices for full pipes, part filled pipes and open channels
Flow and tilt level switches
TECHNOR ENGINEERING LTD 1003/2015
EN ISO 9001:2008
No. : 010131138
TECHNOLOGY PARTNERS
Drainage pumps
Pumps for aggressive liquids
Effluent pumps
Lifting stations (drainage, waste water)
Waste water-, waste water grinder- pumps
Mixers
Recirculation pumps
Tank cleaning systems
Dry well pumping stations with solids separation system
Anti odor filters
TECHNOR ENGINEERING LTD 1103/2015
EN ISO 9001:2008
No. : 010131138
TECHNOLOGY PARTNERS
95% Reduction in TN (Total Nitrogen)
65% Energy Savings
70% Less Chemical Dosage
30% Less Sludge
Real Time Monitoring
Easy to Install
Modeling and simulation of waste water treatment plants
Monitoring of plant operation and troubleshooting
Process optimization
Advanced control strategies
Asset and maintenance management
TECHNOR ENGINEERING LTD 1203/2015
EN ISO 9001:2008
No. : 010131138
TECHNOR PRODUCTS
Automation System of
Sewage Disposal in WWTP eTECH-BTR
An automated reception system of sewage disposal in WWTP
with prepaid cards
TECHNOR ENGINEERING LTD 1303/2015
EN ISO 9001:2008
No. : 010131138
TECHNOR PRODUCTS
ICARUS
Universal Remote Terminal Unit forMonitoring & Control of
Water Tanks, Wells, Pumping Stations
One Unit for all applications
TECHNOR ENGINEERING LTD 1403/2015
EN ISO 9001:2008
No. : 010131138
TECHNOR PRODUCTS
SCADA/Hydraulic modelling/GIS/ERP interfaces
Computerized Maintenance Management Systems
Energy consumption balancing
Flow mass balancing
Communication UHF serial, UHF Ethernet, GSM/GPRS/VPN (modulation, adjustment, store and forward)
Versions (standard and bespoke) for SCADA, PLCs and Data Loggers
Personalized data communication protocols
SOFTWARE
TECHNOR ENGINEERING LTD 1503/2015
EN ISO 9001:2008
No. : 010131138
REFERENCE LIST (PROJECTS)
No Market Sector Projects
1 Water 51
2 Irrigation 10
3 Sewerage 64
4 Waste Water Treatment (WWT) 105
5 Solid Waste Plants (SWP) 19
6 Building Management System (BMS) 20
7 Tunnel Management System (TMS) 3
8 Industry 16
Total 288
TECHNOR ENGINEERING LTD 1603/2015
EN ISO 9001:2008
No. : 010131138
PROJECTS
288 projects, with:
222 SCADA servers/clients and
1168 substations (PLCs)
in:
Greece
Cyprus
Bulgaria
Romania
Germany
Austria
TECHNOR ENGINEERING LTD 1703/2015
EN ISO 9001:2008
No. : 010131138
SCADA
3 RECY CIM REPAS
9 INTOUCH WONDERWARE
16 RSVIEW ROCKWELL
7 AQUAVIEW FLYGT
64 WINCC SIEMENS
52 FACTORY LINK SIEMENS
55 WATER CONTROL (Technor procuct)
16 PCVUE ARCINFORMATIQUE(certified partner)
- N (in red) number of servers/clients
TECHNOR ENGINEERING LTD 1803/2015
EN ISO 9001:2008
No. : 010131138
PLC & CONTROLLERS
461 SIMATIC SIEMENS
569 ALLEN BRADLEY
10 ABB
8 TELEMECANIQUE
18 FMC
7 MITSUBISHI
41 RADIOTELEMETRY
25 Z-WORLD
29 ANDOVER CONTROLS
- N (in red) number of substations -
TECHNOR ENGINEERING LTD 1903/2015
EN ISO 9001:2008
No. : 010131138
COMMUNICATION (WIRED)
DIAL UP
LEASED LINE
PRIVATE MULTIDROP NETWORKS
ADSL
FIBER OPTICS
TECHNOR ENGINEERING LTD 2003/2015
EN ISO 9001:2008
No. : 010131138
COMMUNICATION (WIRELESS)
VHF
UHF (430-450 MHz)
UHF (2.4 GHz, 5 GHz)
DSM/SMS
GSM/GPRS
GSM/VPN
TECHNOR ENGINEERING LTD 2103/2015
EN ISO 9001:2008
No. : 010131138
PROTOCOLS
SINEC L1
SINEC H1
MPI
PROFIBUS
MODBUS
INDUSTRIAL ETHERNET
PROFINET
DF1
DH485 +
ASCII
CUSTOM
TECHNOR ENGINEERING LTD 2203/2015
EN ISO 9001:2008
No. : 010131138
INSTALLATION & START UP - 1
TECHNOR ENGINEERING LTD 2303/2015
EN ISO 9001:2008
No. : 010131138
INSTALLATION & START UP - 2
TECHNOR ENGINEERING LTD 2403/2015
EN ISO 9001:2008
No. : 010131138
INSTALLATION & START UP - 3
TECHNOR ENGINEERING LTD 2503/2015
EN ISO 9001:2008
No. : 010131138
INSTALLATION & START UP - 4
TECHNOR ENGINEERING LTD 2603/2015
EN ISO 9001:2008
No. : 010131138
INSTALLATION & START UP - 5
TECHNOR ENGINEERING LTD 2703/2015
EN ISO 9001:2008
No. : 010131138
INSTALLATION & START UP - 6
TECHNOR ENGINEERING LTD 2803/2015
EN ISO 9001:2008
No. : 010131138
CASE STUDIES
16/288 Projects2 per Market SectorIndicative Selection
TECHNOR ENGINEERING LTD 2903/2015
EN ISO 9001:2008
No. : 010131138
Water/AGRINIO: SCADA Telemetry & Leakage Control
Monitoring and data logging of measured parameters (level, pressure, flow).
Monitoring and control (pumps, valves, etc.)
Prevention and on time handling of malfunctions.
Network operation optimization and energy consumption reduction algorithms.
Leak detection and water losses reduction.
Maintenance software of electromechnical equipment.
TECHNOR ENGINEERING LTD 3003/2015
EN ISO 9001:2008
No. : 010131138
Water/AGRINIO: SCADA Telemetry & Leakage Control
44 PLC substations installed in the outer water network (pumping stations, water tanks, valves, etc.). Radio communication UHF (380-512MHz).
Sensor installation (electromagnetic flow meters, ultrasonic level transmitters, piezoresistive pressure and level transmitters).
17 Data Logging substations in the inner water network (with integrated pressure transmitter and flow measurement). GPRS communication.
SCADA central control system with 2 redundant servers and 2 clients.
SCADA and PLC application software, with algorithms for reduction of energy consumption, mass (flow) balancing and on time failure diagnosis.
Portable leak detection equipment.
TECHNOR ENGINEERING LTD 3103/2015
EN ISO 9001:2008
No. : 010131138
Water/IOS: SCADA Telemetry & Leakage Control
Constant monitoring and recording of critical parameters of water network system operation (flow, pressure, electrical consumption etc.).
Collection and storage of relevant historical data.
Control of the active components of the water network system.
On time diagnosis and handling of breakdowns.
Optimization of operation and saving of energy and human resources.
Automation of the operation of wells and pumping stations.
TECHNOR ENGINEERING LTD 3203/2015
EN ISO 9001:2008
No. : 010131138
Water/IOS: SCADA Telemetry & Leakage Control
17 PLC substations (pumping stations, water tanks, wells, etc.).
Radio communication UHF (380-512MHz)
Sensors connected with the automation panels for measuring flow, level, pressure etc.
13 data loggers with integrated pressure sensor in the inner water network.
1 fully equipped central control station for remote control and operation.
SCADA and PLC application software, with algorithms for reduction of energy consumption, mass (flow) balancing and on time failure diagnosis.
Portable leak detection equipment.
TECHNOR ENGINEERING LTD 3303/2015
EN ISO 9001:2008
No. : 010131138
Irrigation/Thessaloniki:SCADA Telemetry & Lights and Fountains Control
Lights and Fountains stand-alone operation based on automatic operation parameters and on data being collected automatically.
The irrigation facilities, drilling and boosters are controlled directly from the control center. Every local process is set according to the data received from a remote station.
4 PLC central control stations
11 Pillar PLC substations
Control and remote management station
Flow meters and level transmitters
Meteorological station
Fiber optic network with Ethernet and profibus protocol
Fully automatic system operation
TECHNOR ENGINEERING LTD 3403/2015
EN ISO 9001:2008
No. : 010131138
Irrigation/Larissa: SCADA Telemetry
Replacement of conventional irrigation with central monitoring and control telemetry system
Weather conditions recording for irrigation control
Control and record of leakage/water consumption
Water Network pressure control
15 Pillar PLC substations
Central control and management station
Analog instruments for flow & pressure measurements
Meteorological station
GSM/GPRS communication among the substations & aDSL for the central station
Fully automatic system operation
TECHNOR ENGINEERING LTD 3503/2015
EN ISO 9001:2008
No. : 010131138
Sewerage/Artesiano:SCADA Telemetry & New Pumping Stations
New sewerage network
Automatization of the operation of the pumping stations.
Monitoring and recording of the relevant measured values (level, flow, electrical power, etc.) for every station.
Surveillance, control and remote management of the pumps.
Pumps maintenance program.
Prevention and on time handling of breakdowns.
Reduction of possibilities of malfunctions
Optimization of operation and saving of energy and human resources.
SCADA WaterControl, 2 PLC substations and 1 PLC central station
UHF radio communication
Electromechanical equipment (pumps, flow meters, level transmitters etc.)
Hydraulic equipment (piping, valves, non-return valves, dosing pumps, sluices, generators, pressure absorption vessel etc.)
Installation and erection
TECHNOR ENGINEERING LTD 3603/2015
EN ISO 9001:2008
No. : 010131138
Sewerage/Chalkida:SCADA Telemetry, Control & Monitoring
Automation of the operation of the pumping stations.
Monitoring and recording of the relevant measured values (level, flow, electrical power, etc.) for every station.
Surveillance, control and remote management of the pumps.
Pumps maintenance program.
Prevention and on time handling of damages.
Optimization of operation and saving of energy and human resources.
22 PLC pumping stations.
Wireless Ethernet communication 2.4GHz
Sensors connected with the automation panels for measuring flow, level, pressure etc.
2 PC servers in redundancy mode and 3 work stations.
PLC and SCADA software development (system, substations, control, management, energy management, maintenance, communication, data base)
TECHNOR ENGINEERING LTD 3703/2015
EN ISO 9001:2008
No. : 010131138
WWT/Zakynthos:SCADA Telemetry and System Upgrade
System upgrade for proper operation and better effluent quality
Influent: sewage & batches
Automation of the operation of the pumping stations.
Monitoring and recording of the relevant measured values (level, flow, electrical power, etc.) for every station.
Surveillance, control and remote management of the pumps.
Pumps maintenance program.
Prevention and on time handling of breakdowns.
Optimization of operation and saving of energy and human resources.
1 PLC for the new sludge treatment installation.
2 new grids and 1 screenings screw conveyor, whose automatic operation is integrated in the new PLC.
1 PLC central station.
Electromechanical equipment (ventilators, mixers, motors, DO measuring sensors, compressors for sand and grit removal tanks etc.).
Hydraulic equipment (pumps, valves etc.).
SCADA and new central control center.
TECHNOR ENGINEERING LTD 3803/2015
EN ISO 9001:2008
No. : 010131138
WWT/Volos:SCADA Telemetry and System Upgrade
Upgrade and automation of the active elements of every sectional unit of the plant.
Monitoring, control and remote management of the loads
Optimization of the operation for energy and human resources saving, enhanced reliability for the minimization of breakdowns and probability of part of production process loss
Monitoring, recording and statistics generation of measured values (electrical, hydraulic and chemical) for conclusions on the plant operation, the effluent quality, etc.
Communication between the units for optimized coordination and proper handling of malfunctions.
12 PLC in specific points of the plant for the control of all units.
Wired Ethernet communication
Measuring instruments connected to automation panels.
2 PC servers in redundancy mode and 3 work stations.
PLC and SCADA software development
TECHNOR ENGINEERING LTD 3903/2015
EN ISO 9001:2008
No. : 010131138
SWP/Lesvos:SCADA Telemetry and Plant Automation
Full automation and remote monitoring and control of the biological treatment plant and adduction pumping station.
PC and SCADA in the central control station
7 PLC substations
Wired connection between PLCs and control stations
Analog instruments installation (oxygen, flow, etc.)
Floats in the leachate tank, pumping stations and sluice gate
Real time data collection and data interchange between data basses.
Enhancement of reliability and functionality.
Optimization of safety and plant’s performance.
Leachate management.
Management of Outdoor Lighting and Biogas.
Control of vehicles entry -exit (sliding main entrance doors).
Monitoring of irrigation-firefighting-rainwater pumping stations, weigh-bridge and Environmental Data (meteorological Station).
TECHNOR ENGINEERING LTD 4003/2015
EN ISO 9001:2008
No. : 010131138
SWP/Agrinio:SCADA Telemetry and Plant Automation
Data collection for telemetry, recording, control and management
Transmission of critical parameters from local stations to the central control station via industrial network
SCADA for data visualization & processing and automated operation .
Remote monitoring and control of plant’s components (motors, pumps etc.)
Wired communication using fiber optic.
3 PLC substations
PC and SCADA in the Cental Control Station with all the necessary equipment (terminals, printers, etc.).
Automation panels
TECHNOR ENGINEERING LTD 4103/2015
EN ISO 9001:2008
No. : 010131138
BMS/Glyfada:Sport Facilities’ Heat & Ventilation Control
Central Heat of every room of the building control
Ventilation system control
PLC with Remote I/O per building (2 buildings)
Supporting devices for HVAC control (electrical valves, temperature sensors, dampers, etc.)
TECHNOR ENGINEERING LTD 4203/2015
EN ISO 9001:2008
No. : 010131138
BMS/Istiea:Medical Center’s Energy Management
Management of the energy.
Scenarios implementation for lighting and automation
Safety monitoring through places surveillance
Remote control of specific areas of the building and remote management of the whole establishment.
Control and record of parameters (temperature, humidity, flow, pressure, etc.).
Replacement of classical automation (relay, etc.)
Management of analog signals (temperature, humidity etc.) and adaptation to new scenarios.
3 Pillar PLC substations
Remote control points via remote I/O and Modbus communication.
Central Control Station with SCADA stand-alone server
Ethernet and RS485 network.
Implementation of several communication and protocols types (Modbus, TCI/IP, etc.)
Full automated operation and remote management.
TECHNOR ENGINEERING LTD 4303/2015
EN ISO 9001:2008
No. : 010131138
TMS/Schisto Keratsini:SCADA Telemetry & Remote Management
9 PLC substations (Main power supply, generator, firefighting booster and the rest electromechanical equipment)
SCADA and PC in the central control station
Wired communication between the substations and the central control station
Instruments for multi-measurements of electrical values.
Monitoring and control of lighting, ventilation, power supply and energy consumption
Recording operating hours
Scheduling maintenance
Restore of operation after power outage
TECHNOR ENGINEERING LTD 4403/2015
EN ISO 9001:2008
No. : 010131138
TMS/Drapetsona:SCADA Telemetry & Remote Management
12 Pillar PLC substations in redundancy mode
2 SCADA central control stations consisted of two servers (main – redundant) and two client stations, each.
Ethernet fiber optic network
Several communication and protocol types (ASCII, Modbus, UDP, etc.)
Full automatic operation and remote management
Recording operating hours, scheduling maintenance
Monitoring and control of lighting, ventilation, power supply, energy consumption, vehicle’s over height, traffic signaling, CCTV systems, traffic measuring, call center, firefighting booster
Remote management (manually or automatically)
Logging of every operation, date and hour occurred
Time programming of the facilities operation
Restore of operation after power outage
Emergency program that after its activation, safety measures are implemented automatically
TECHNOR ENGINEERING LTD 4503/2015
EN ISO 9001:2008
No. : 010131138
Industry/ENEL:Hydroelectric Power Station telemetry
10 PLC substations with wireless communication
Photovoltaic panels of 1000Wp/24Vdc and 1500Wp/24Vdc power and 848Ah capacity
Flow meters & level transmitters
SCADA Central Control Station
Water intake section: Management of water routing towards the hydroelectric power station (5 sites)
Hydroelectric power plant remote monitoring and control
Logging & visualization of critical parameters (flow, level, etc.)
TECHNOR ENGINEERING LTD 4603/2015
EN ISO 9001:2008
No. : 010131138
Industry/PASPATIS:Olive Oil Tank Management SCADA
Temperature & pressure sensors
Calibration of ultrasonic level meter
Loop test
PLC: Instruments, Operation, Networking
Tank management (level, volume, flow, etc.)
Automation of mixing process and recipe execution
Process control: indication of temperature, pressure, etc. & warn/alarm
Remote operation of plant
TECHNOR ENGINEERING LTD 4703/2015
EN ISO 9001:2008
No. : 010131138
ADDRESS www.technor.gr
TECHNOR Engineering Ltd
Gr. Lambraki 40
184 54 Nikea
Tel. +30 210 4941 904 & 905
Fax +30 210 4941 902
e-mail: [email protected]