Technology - MOTOR JIKOV · • Good for tree harvesting, firewood and pulpwood cutting, and heavy farm use. Standard Guide BarS (Description code FSN and PRO) • For small gas or

7-2, SUEHIROCHO 1-CHOME, OHME, TOKYO, 198-8760, JAPANPHONE : (81)-428-32-6118 FAX : (81)-428-32-6145

Email: [email protected] [email protected]

www.yamabiko-corp.co.jp/shindaiwa-global/

2 012 Master Product Catalogue　

TechnologyJAPAN

Printed with 100% Vegetable Oil Inks.

Specifications, descriptions, and illustrative materials in this literature are as accurate as known at the time of publication, but are subject to change without notice.Illustrations may include optional equipment and accessories, and may not include all standard equipment.©2012 YAMABIKO Corporation All Rights Reserved

Sh

ind

aiwa M

aster Pro

du

ct Catalo

gu

e　2012

　　　　　

New Model Soft-start

Model certified for CE Super Anti-Vibration system

Side access chain tensioner

Optional spike

Rotatable handle

Adjustable cutter clearance

Non-adjustable cutter clearance

Tip guard

Ventilated back pad

EZ-Look system

Model certified for CCC

Model certified for RoHS

C4 Technology engine

Low-Tone model

Digital controlled C.D.I

Choke with automatic fast idle

Heavy duty air filter

G-FORCEEngine Air Pre-Cleaner™

Contents

The YAMABIKO Corporation was formed with the merger of Kioritz Corporation and Shindaiwa Corporation. Founded after WWII, both companies have more than 50 years of experience serving similar businesses. Kioritz Corporation started its business by manufacturing agricultural machinery such as engine powered dusters and mist blowers and then expanded its business into serving the tree maintenance and landscaping/gardening segments under the Kioritz and ECHO brand names. Shindaiwa Corporation started its business by manufacturing electric and industrial products and through the years maintained its strength in industrial machines before moving into the landscaping and gardening segments.

Both companies accumulated technical and engineering expertise while gaining respective industry leadership positions. Over time they also both began focusing on engine powered portable power equipment. For more than 30 years, the two companies have been competitors in the outdoor power equipment segment serving professional users in landscaping, forestry and agricultural businesses as well as homeowners.

With the merger complete, the consolidated technical know-how and expertise from the Kioritz, ECHO, and Shindaiwa organizations create a solid corporate foundation for servicing millions of engine powered units sold worldwide via an extensive dealer network.

Consideration for the environment – in the form of gas exhaust regulations, energy conservation, minimizing agricultural chemicals and more – is becoming of increasing concern throughout the world. YAMABIKO is committed to the development of products designed to minimise environmental and ecological impact. We are committed to offering industry leading environmentally friendly products.

YAMABIKO Corporation’s goal is to create the bridge that bonds people and nature with the future.

The YAMABIKO Corporation, named after the guardian of mountains and forests in Japan, is committed to the protection of the environment and helping keep the planet green.

Environmental Products 2-3

JAPAN Technology 4-5

Chain Saws 6-10• Chain Saws • Top Handle Saws

Chain Saw Accessories 11

Trimmers 12-15

Brushcutters 16-21• Brushcutters • Clearing Saw • Backpack Brushcutters

Multi-tool System 22-23

Trimmer / Brushcutter Accessories 24-25• Trimmer / Brushcutter Accessories • Cutting Heads & Blades Reference Chart • GEAR CASE ATTACHMENTS

Hedge Trimmers 26-27

Shafted Hedge Trimmers 28-29

Blowers 30-32

Engine Cutters 33

Pole Pruner 34

Sprayers 35

Spreaders 36

Water Pump 37

Sales Support Materials 38-40• Oil & Lubricants • Protective equipment & Apparel • Tachometers • Shindaiwa Premium Items • Display Modules

Product History of Shindaiwa 41

Specifications 42-49

About YAMABIKO 50-51

Index 52-53

Find these marks for "New" and "Unique" or "Useful" features.

12012 Master Product Catalogue

which uses environmentally friendly lubricants and chemicals to recycle 100% of aluminum and magnesium. And we have eliminated SVHL and REACH listed toxic substances from our manufacturing process.

ProductsOperator health, safety and welfare are paramount to the design of YAMABIKO and Shindaiwa products. Our products are known for low vibration, low noise and comfortable use. We design and produce low exhaust gas

emission engines which comply with CARB, EPA and/or EU emission regulations. These compact designed, high performance engines are reliable and dependable, making them a leading choice among professional users.

Today's technology for tomorrow's natureYAMABIKO Corporation’s corporate mission is to “create the bridge that bonds people and nature with the future”. We operate under four guiding principles:· Offer the best products and services in the world.· Support people and companies committed to sustaining nature and the environment.· Lead the industry through the creation of new markets and customers, ultimately resulting in growth for tomorrow.· Provide a sense of fulfillment for all persons affiliated with YAMABIKO.

Our PolicyEnvironmental protection is the social responsibility of YAMABIKO and everyone working for the corporation shall strive to protect the environment.

ProductionYAMABIKO’s plants such as the Yokosuka plant in Japan and ECHO Machinery in Shenzhen, China are accredited for ISO 14001 Environmental Management System certification. And YAMABIKO sets stringent environmental protection objectives for each of its factories. These objectives are continually monitored and reviewed annually. One example is our foundry

2012 Master Products Catalogue 32012 Master Products Catalogue2

Morioka plant, JapanHiroshima plant, Japan Yokosuka plant, Japan

ECHO Machinery, China

ECHO Inc., U.S.A.

Worldwide procurement and production

JAPANTechnology

High performance products with the most advanced engine technologies.

Advanced Technology

Global Production

Vertical Integration and In-house

Manufacturing

Manufacturing worldwide using the same YAMABIKO quality standard.

Uncompromized testing.

Innovative design

World first innovative products

Consistent in-house manufacturing systems.

In-house manufacturing with advanced production engineering from raw materials to complete products

JAPAN TechnologyYAMABIKO Corporation has a long heritage of producing world class, innovative products with the most advanced engine technology. It has accomplished this through a business philosophy that integrates innovation with global state of the art practices in engineering, procurement and manufacturing. YAMABIKO products with “Japan Technology” offer the best quality and performance available worldwide.

Advanced technology enables the development of innovative and high-performing products.

Vertical integration and in-house manufacturingprovides well managed quality control, from raw materials to complete products.

Global productionAll domestic and overseas production and procurement points are operated under the same YAMABIKO quality standard.

4 2012 Master Product Catalogue 52012 Master Product Catalogue

・Engine features chrome plated cylinder, forged crankshaft and connecting rod, and woodruff keyed flywheel for extended life.

・2-ring piston provides extra power and durability required by professional users.

・Magnesium die cast crank case provides professional grade durability in a lightweight package.

Soft-start system for quick and effortless start

Easy-to-use thumb screw access to spark plug and air filter

Lightweight, aluminum alloy front handle

Magnesium die-cast crank case

・Great power to weight ratio

・Magnesium crank case for light weight and extended durability

・Heavy duty 2-piece crank shaft

・Chrome plated cylinder with Y-port system (Patent Pending) for extremely better durability, lower emissions and better fuel economy

・G Force Engine pre air cleaner system

Newly Developed Compact Pro-saw

Dual post front guard

Aluminum front handle

Soft-start

Unique Features of Shindaiwa Chain Saws

All Professional Grade


photo/360

*1: Without Guide bar and Saw chain

377

Chain Saws

. Engine displacement 30.5 cm3 . Dry weight*1 4.0 kg . Output 1.1 kW / 1.5 ps . Bar Size 30, 35 cm / 12, 14 in

. Engine displacement 35.2 cm3 . Dry weight*1 4.2 (352S), 4.0 (360) kg . Output 1.42 kW / 1.93 ps (352S), 1.4 kW / 1.9 ps (360) . Bar Size 30, 35 cm / 12, 14 in (352S), 40cm / 16 in (360)

. Engine displacement 37.7 cm3 . Dry weight*1 4.3 kg . Output 1.65 kW / 2.24 ps . Bar Size 40 cm / 16 in

. Engine displacement 38.9 cm3 . Dry weight*1 4.5 kg . Output 1.70 kW / 2.31 ps . Bar Size 33, 38, 40 cm / 13, 15, 16 in

. Engine displacement 38.4 cm3 . Dry weight*1 4.5 kg . Output TBD . Bar Size TBD

390S

305S

352S 360

389S

photo/452S

577P

757C 757

・Extra higher torque provides powerful cutting performance under tougher job

・Magnesium crank case for light weight and extended durability

・Amazing performance through high engine speed.

・Optional second spike gives extra hold to the saw

・Semi automatic decompression valve for easier starting

Newly developed pro-saw

G-FORCE pre air cleaner system

Oversized air filter

Durable Aluminum front handle


757C


photo/757

I have tried many different brands in my life. A few years ago, I decided to buy only Shindaiwa since I have found them to be far better than all others. They start when we need the and require almost no maintenance. Just one problem: never lend them to your neighbours, or you will have a lot of difficulties getting them back.

I began selling Shindaiwa and ECHO machines a few years ago. In the beginning, I was not really convinced, having a long experience with another European brand. I decided to test just one machine, their top handle saw. The test performed so well that today I sell only these machines. Indeed, these machines are really selling more than any others. I am also very happy with the service given by Eurogarden. Nice people, really professional and efficient service but in a friendly way and without unnecessary pressure. I feel really at home being part of such a team. Doing business that way is a pleasure.

Yves PouppezPrivate ownerBelgium

NeulebartDealerBelgium

Te s t i m o n i a l s


photo/452S

With heated handle function

. Engine displacement 45.1 cm3 . Dry Weight*1 4.6 (452S), 4.8 (452GS) kg . Output 2.26 kW / 3.07 ps . Bar Size 33, 38, 40, 45 cm / 13, 15, 16, 18 in

. Engine displacement 47.9 cm3 . Dry weight*1 4.9 kg . Output 2.26 kW / 3.07 ps . Bar Size 33, 38, 40, 45, 50 cm / 13, 15, 16, 18, 20 in


. Engine displacement 47.9 cm3 . Dry weight*1 4.8 kg . Output 2.28 kW / 3.10 ps . Bar Size 33, 38, 40, 45, 50 cm / 13, 15, 16, 18, 20 in



. Engine displacement 59.8 cm3 . Dry weight*1 5.9 kg . Output 3.0 kW / 4.1 ps . Bar Size 40 cm / 16 in

. Engine displacement 59.8 cm3 . Dry weight*1 6.0 kg . Output 3.0 kW / 4.1 ps . Bar Size 50 cm /20 in

. Engine displacement 73.5 cm3 . Dry weight*1 6.8 kg (757), 6.6 (757C) kg . Output 4.06 kW / 5.52 ps . Bar Size 50, 60, 70, 75 cm / 20, 24, 28, 30 in (757), 45, 50, 60, 70 cm / 18, 20, 24, 28 in (757C)

452GS

452S

488

488P 490

577

598

600


Pro-Lite BarS(Description code ProLite) • For high-speed, light-weigh pro

chain saws. • Good for tree harvesting, firewood and pulpwood cutting, and heavy farm use.

Standard Guide BarS(Description code FSN and PRO) • For small gas or electric saws.

Good for pruning and light firewood cutting.

CarvinG BarS(Description code FSN and PRO) • For small gas or electric saws.

Good for pruning and light firewood cutting.

Bar SeLeCtion

Chain Saw Accessories

Round chain saw file Dozen per box

Shindaiwa Chain Saw fiLe

Guide Bar & Chain – Chain Saw ModeLSFor original fit-ups and replacement – these bar and chain combinations meet CE compliance for low vibration.

oPtionaL SPikeS

Top Handle Saws

269TCS

. Engine displacement 26.9 cm3 . Dry weight*1 2.9 kg . Output 0.86 kW / 1.17 ps . Bar Size 25, 30 cm / 10, 12 in (269TS), 25 cm / 10 in (269TCS)

. Engine displacement 32.3 cm3 . Dry weight*1 3.5 kg . Output 1.36 kW / 1.85 ps . Bar Size 30, 35 cm / 12, 14 in


269tS 269tCS

320tS

Guide Bar Saw Chain

Model Gauge (in) Pitch (in) Length (cm) Parts NumberNumber of Drive

LinksOregon Type Part Number Carlton Type

269TS 0.050 3 / 825 X121-000080 42

91VG X221-000020N1C-BL

91PX X221-000110

30 X122-000171 4791VG 431010-39230

N1C-BL91PX X222-000140

269TCS 0.050 1 / 4 25 X101-000090 60 25AP 431610-10030 −

320TS 0.050 3 / 830 X122-000171 47

91VG 431010-39230N1C-BL

91PX X222-000140

35 X123-000271 5391VG 431019-39230

N1C-BL91PX X223-000130

305S 0.050 3 / 830 X122-000171 47 91VX 431010-39931 N1C-BL35 X123-000271 53 91VX 431019-39932 N1C-BL

352S, 360 0.050 3 / 835 18132-01424 52

91VG 431019-39530N1C-BL

91PX X223-000070

40 X124-000440 5791VG 431011-39530

N1C-BL91PX X224-000080

377 0.050 0.325 40 X124-000450 66 95VPX 431711-60031 −390S TBD TBD TBD TBD TBD TBD TBD TBD

389S, 452S, 488, 488P, 490

0.058 0.325

33 18172-01302 5621BP 431713-30230

K2L21BPX 431713-30231

38 18172-01504 6421BP 431721-30230

K2L21BPX 431721-30231

40 X124-000460 66 21BPX X244-000041 K2L452S, 488, 488P, 490

0.058 0.325 45 X125-000150 72 21BPX 431717-30231 K2L

488, 488P, 490 0.058 0.325 50 X126-000110 7821BP X246-000080

K2L21BPX X246-000081

598 0.058 3 / 840 X124-000520 60 73LGX X264-000040 A2LM50 X126-000080 72 73LGX 431012-30831 A2LM

600 0.058 3/8 50 X126-000080 72 73LGX 431012-30831 A2LM

577, 577P, 757, 757C

0.058 3 / 845 X125-000160 68 73DP X265-000010 A2EP-BL50 X126-000130 72 73DP 431012-32630 A2EP-BL60 X128-000030 84 73DP 431013-31730 A2EP-BL

757, 757C 0.058 3 / 8 70 X130-000010 89 73DP X270-000030 A2EP-BL

Model Parts Number

577, 577P22150-97310C304-000170

598, 600 P021-034090

75722169-9732022169-97330

. Engine displacement 21.1 cm3 . Dry weight*1 4.2 kg . Output 0.69 kW / 0.94 ps

. Engine displacement 21.2 cm3 . Dry weight*1 4.2kg . Output 0.70 kW / 0.95 ps






Trimmers

*1 : Without Cutting Attachment and Shield

t230Xr

f220

t220

f226S

t226S

t242XS

4 Stroke

2 Stroke

Legendary performance Shindaiwa's steady, continual and never ceasing investment in the research and development has made Shindaiwa 2-stroke engine products lighter and more powerful.

Uncompromised Quality Where there are competitive products that are built with cost reduced components,

Shindaiwa has never compromised on parts quality and high standard production procedure.

Long Lasting Shindaiwa Built-in quality with hard chrome plated cylinders, full size ball or needle bearings and precisely machined components provide lasting performance and low maintenance.

High Performance - Low Emissions Shindaiwa patented C4 engine is the best and perfect mix of 2-stroke and 4-stroke engine technology.C4 engines offer high power-to-weight ratios, excellent acceleration, lower noise level, lower gas emissions, excellent fuel economy, and high torque.

Power and efficiency The patented Power Boost Chamber creates positive crankcase pressure and supercharges the mixed fuel into the combustion chamber for more horsepower and torque for the toughest jobs.

Fuels like a 2-stroke C4 engine used a 50:1 fuel mix eliminating the oil level management.

All position operationThanks to mixed fuel usage, the C4 engine can be operated in any position.

Fuel efficiency C4 engines can run up to 33% longer than comparable 2-stroke engines on a tank of fuel.

The Power of Choice

4 Stroke Technology

2 Stroke Technology






・One of the most powerful engines in its class.

・Chrome plated and closed ported cylinder mounted by 4-bolts provides better durability, lower emissions and better fuel economy.

・Over sized clutch holds clutch engagement under heavy loads.


Combination of Soft Start system and one p iece e lectronic CDI igni t ion provides fast, easy and effortless starts.

8 degree of fset handle p rov ides na tu r a l wr is t pos i t ion and exce l lent operator comfort.

8mm spl ined ho l low dr ive shaft reduces weight without sacrificing toughness.



t350

t270


t260X




t2510X

t3410

t410S

t310XS



C230

C260

Brushcutters

photo/C270 C270 C300





. Engine displacement 27.2 cm3 . Dry weight*1 6.2 kg . Output 1.1 kW / 1.5 ps (C270), 1.0 kW / 1.3 ps (C300)


C226S

C242S

C2510

4 Stroke

2 Stroke










The Power of Choice

4 Stroke Technology

2 Stroke Technology





・Newly designed harness and quicker hook up supports comfortable operation


Professional Two-Stage Air filter system provides higher durability and easy-to-care maintenance.

Super ant i -v ibrat ion system reduces vibration during the work.

M ag ne s iu m C r a nkc a s e ma kes i t toughe r a nd stronger in a Iightweight package.


*1: Without Cutting Attachment and Shield

C35La

B45La





. Engine displacement 53.2 cm3 .Dry weight*1 9.5 (EU) , 9.4 (Basic) kg . Output 1.7 kW / 2.3 ps (EU) , 2.3 kW / 3.1 ps (Basic)

C310S

C3410

C350

B450

B410S

B530

B530(Basic)




Backpack Brushcutters


BP40La BP35

Clearing Saw






. Engine displacement 33.6 cm3 . Dry weight*1 9.7(BP35), 8.9(BP40LA) kg . Output 1.3 kW / 1.8 ps (BP35), 1.5kw / 2.0ps (BP40LA)

CL520 CL590

rCL590 BP420S

BP520S BP530

. Engine displacement 23.9 cm3

. Dry weight*1 4.5 kg . Output 0.8 kW / 1.1 ps






Positive Coupler

SBA-TX24-1

The Multi-Tool's easy-to-use coupler provides a posit ive connection between the power head and attachments.

Multi-tool System

Bar/Chain not included

photo/M2510

photo/M242S

photo/M230S

SBA-PS24

SBA-AH2422

SBA-P24

SBA-AHS2422

SBA-LE24

M230S M230

M242S

M2510

Trimmer Attachment Hedge Trimmer Attachment Pole Pruner Attachment Lawn Edger Attachment Power Broom Attachment

SBA-TX24-1 #65001 SBA-AH2422 #65003 SBA-AHS2422 #78703 SBA-P24 #65002 SBA-LE24 #65010 SBA-PS24

Configuration EU Basic EU Basic EU Basic EU Basic EU Basic EU

Dry weight (kg)

0.8(w / o Cutting

attachment and Shield)

0.8(w / o Cutting

attachment and Shield)

2.2 2.2 2.1 2.11.8

(w / o Bar and Chain)

1.8(w / o Bar and

Chain)

2.2(w / o Blade)

2.2(w / o Blade)

5.2(w / Drum

assemblies)

Length (mm) 820 820 1460 1460 840 840 1870 1870 795 795 480

Drive shaft Diameter (mm) 6 6 6 6 6 6 6 6 6 6 6

Main Pipe Diameter (mm) 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0

Gear reduction ratio 1.29 1.29 6.14 6.14 6.14 6.14 1.06 1.06 1.36 1.36 40.0

Effective cutting length / Pich (mm) − − 520 / 31 520 / 31 520 / 31 520 / 31 − − − − −

Guide Bar Length (inch) − − − − − − 8, 10, 12 8, 10, 12 − − −

Saw chain Pich (inch) − − − − − − 3 / 8 3 / 8 − − −

Cutting Blade Length (mm) − − − − − − − − 197 197 −

Max. sweeping width (mm) − − − − − − − − − − 575

Applicable Power HeadM230SM242SM2510

M230M230SM242SM2510

M230M230SM242SM2510

M230M230SM242SM2510

M230M230SM242SM2510

M230M230, M230S

M242SM2510

*1: Unit Without Attachment

Cutting head not included

Blade not included

4 Stroke

2 Stroke










The Power of Choice

4 Stroke Technology

2 Stroke Technology


Cutting Heads & Blades Reference Chart

Square triMMer Line round triMMer Line

SPECIALTY TRIMMER LINE

• The pliable inner core is made of high-durability, 100% virgin polyamide to permit the line to flex when necessary.

• The tough outer shell is made of a reinforced composite material that resists impact and abrasion.

ARMORLINE trimmer line, available in both round or square configura-tions, is double-extruded to combine a tough, inner core with a hard outer shell. Result: remarkable cutting properties.

Silentwist ® trimmer line, reduces wind resistance and noise. Reduced wind resistance means trimmers operate more efficiently for improved fuel economy.• To ensure quality, Silentwist ® line is made with innovative, 100% virgin

polyamide monofilaments.• Use Silentwist ® line where noise abatement is a requirement.

TRIMMER HEADS

Speed-feed triMMer head • Reload trimmer line in 30 seconds or less! • Easy to load, no disassembling of head required when

loading trimmer line. • Rugged, reliable semi-automatic head for medium- to

heavy-duty applications. • Index line by tapping the bottom of the head on the ground. • Smooth bottom enables the head to glide along the ground. • Head is pre-wound with 2.4 mm Silentwist ® trimmer line.

taP feed headSemi-automatic head for medium- to heavy-duty applications. Tried and true design. • Index line by tapping knob on the ground. • Made of tough, high-impact nylon.

SteP 2:Feed approximately 4 meters of trimmer line through eyelet.

SteP 3:Reload by simply turning large knob on top of trimmer head and cutting line to equal lengths.

SteP 1:Align arrow on knob with eyelet.

knob

eyelet

Speed-feed 450 triMMer headSpeed-feed 450 fits all straight shaft Shindaiwa trimmers and brushcutters. Especially better fit up with a 25 cm3 displacement or bigger engine.

Speed-feed 375 triMMer headSpeed-feed 375 is smaller in diameter, lighter than speed-feed 450, and provides better fit up with a 25 cm3 displacement or smaller engine.

Trimmer / Brushcutter Accessories

GEAR CASE ATTACHMENTS

Pruner attaChMentConverts your trimmer to an extended-reach pruner. Bar length: 20, 25, and 30 cm.

Att-P230

artiCuLated hedGe triMMer attaChMentConverts your trimmer to a Articulated Hedge Trimmer.

Att-AH230


Warning: A standard trimmer should never be operated with blade-type attachments. A blade-equipped machine must be fitted with barrier bar or a bicycle-type handlebar and a harness or strap.

Best for grass, light brush, and shrubs. Reversible for longer life.

For dense weeds, vines, and undergrowth.

For undergrowth and thinning small

saplings.

For undergrowth and thinning

medium saplings.

For sapling and tree thinning. Can cut tree trunks up to

10 cm in diameter.

BRUSHCUTTER BLADES

8-Cutter MetaL BLadeEight-toothed blade offers cleaner cuts.

CLearinG Saw BLadeFor use on thick saplings and dense thicket

3-Cutter MetaL BLadeFor use on grasses and weeds

4-Cutter MetaL BLadeFor use on grasses and weeds

Hedge TrimmerAttachment(Without outer tube)

Pole PrunerAttachment(Without outer tube)

ATT-AH230 ATT-P230

Dry weight (kg) 1.80.9

(w / o Bar and Chain)

Gear reduction ratio 6.14 1.06

Effective cutting length / Pich (mm) 520 / 31 −

Guide Bar Length (inch) − 8, 10, 12

Saw chain Pich (inch) − 3 / 8

TRIMMER HEAD (Semi-Automatic) METAL BLADE

TRIMMER MODELS ARBOR BOLT TAP FEED HEAD SPEED-FEED 375 SPEED-FEED 4503-CUTTER METAL

BLADE4-CUTTER METAL

BLADE8-CUTTER METAL

BLADECLEARING SAW

BLADE

For

Euro

pe

F226S − X047-000550 − − − − − −

T226S − X047-000560 − − X405-000320 X405-000330 X405-000350 −

C226S − X047-000560 − − X405-000320 X405-000330 X405-000350 −

T242XS 7 mm LH − X047-000632 − X040-000080 X405-000330 X405-000350 −

C242S 7 mm LH − X047-000632 − X040-000080 X405-000330 X405-000350 −

T2510X 7 mm LH 67000-65010 X047-000632 X047-000581 X040-000080 X405-000330 X405-000350 −

C2510 7 mm LH 67000-65010 X047-000632 X047-000581 X040-000080 X405-000330 X405-000350 −

T310XS 8 mm LH 60144-98330 − X047-000581 X040-000080 X405-000330 X405-000350 −

C310S 8 mm LH 60144-98330 − X047-000581 X040-000080 X405-000330 X405-000350 −

T3410 8 mm LH 78820-15000 − X047-000581 X040-000080 X405-000330 X405-000350 −

C3410 8 mm LH 78820-15000 − X047-000581 X040-000080 X405-000330 X405-000350 −

T350 8 mm LH 78820-15000 − − X040-000080 X405-000330 X405-000350 −

C350 10 mm LH 78820-16000 − X047-000581 X040-000080 X405-000330 X405-000350 −

T410S − X047-000220 − − X405-000151 X405-000330 X405-000350 −

B410S − X047-000220 − − X405-000151 X405-000330 X405-000350 −

B530 10 mm LH 78820-14000 − − X405-000151 X405-000330 X405-000350 −

BP420S − X047-000331 − − X405-000151 X405-000330 X405-000350 −

BP520S − X047-000331 − − X405-000151 X405-000330 X405-000350 −

BP530 8 mm LH 78820-05000 − X047-000581 X040-000080 X405-000330 X405-000350 −

CL520 − X047-000460 − − X405-000151 X405-000330 X405-000350 −

CL590 − X047-000460 − − X405-000151 X405-000330 X405-000350 −

RCL590 − − − − − − − 695001-51530

SBA-TX24-1 7 mm LH 67000-65010 X047-000632 − X040-000080 X405-000330 X405-000350 −

Asia

and

oth

ers

F220 8 mm RH X047-000790 X047-000622 − − − − −

T220 7 mm LH X047-000780 X047-000632 − X040-000080 X405-000330 X405-000350 −

T230XR 7 mm LH X047-000780 X047-000632 − X040-000080 X405-000330 X405-000350 −

C230 7 mm LH X047-000780 X047-000632 − X040-000080 X405-000330 X405-000350 −

T260X 8 mm LH 78820-04000 X047-000632 X047-000581 X040-000080 X405-000330 X405-000350 −

C260 8 mm LH 78820-04000 X047-000632 X047-000581 X040-000080 X405-000330 X405-000350 −

T270 8 mm LH 78820-04000 − X047-000581 X040-000080 X405-000330 X405-000350 −

C270, C300 8 mm LH 78820-04000 − X047-000581 X040-000080 X405-000330 X405-000350 −

C350 10 mm LH 78820-16000 − X047-000581 X040-000080 X405-000330 X405-000350 −

C35LA 10 mm LH 78820-16000 − X047-000581 X040-000080 X405-000330 X405-000350 −

B450 10 mm LH 78820-16000 − X047-000581 X405-000151 X405-000330 X405-000350 −

B45LA 10 mm LH 78820-16000 − X047-000581 X405-000151 X405-000330 X405-000350 −

B530 10 mm LH 78820-14000 − X047-000581 X405-000151 X405-000330 X405-000350 −

BP35 8 mm LH 78820-04000 − X047-000581 X040-000080 X405-000330 X405-000350 −

BP40LA 8 mm LH 78820-04000 − X047-000581 X040-000080 X405-000330 X405-000350 −

Medium Clamshell 525002 C2070191 2.5mm x 31m

Large Clamshell

525001 C2070192 2.5mm x 63m

530001 C2070193 3.0mm x 44m

535001 C2070194 3.5mm x 32m

Super Spool

525003 C2070195 2.5mm x 189m

530003 C2070196 3.0mm x 132m

535003 C2070197 3.5mm x 97m

Giant Spool 530005 C2070198 3.0mm x 219m

Small Clamshell 425015 C2070199 2.5mm x 15m


Large Clamshell

425001 C2070202 2.5mm x 80m

430001 C2070203 3.0mm x 56m

435001 C2070204 3.5mm x41m

Super Spool

425003 C2070206 2.5mm x 241m

430003 C2070207 3.0mm x 168m

435003 C2070208 3.5mm x 123m

Giant Spool 430005 C2070209 3.0mm x 279m

Small Clamshell

620015 C2070210 2.0mm x 15m

624015 C2070211 2.4mm x 15m

626515 C2070212 2.65mm x 15m


626501 C2070214 2.65mm x 71m

. Engine displacement 21.1 cm3 . Dry weight 4.7 (DH220), 4.5 (22DH) kg . Output 0.6 kW / 0.8 ps (DH220), 0.68 kw / 0.92 ps (22DH) . Effective cutting length 428 (DH220), 521 (22DH) mm

. Engine displacement 21.1 cm3 . Dry weight 4.6 kg . Output 0.59 kW /0.80 ps . Effective cutting length 484 mm

. Engine displacement 22.5 cm3 . Dry weight 5.7 kg . Output 0.75 kW / 1.02 ps . Effective cutting length 519 mm

. Engine displacement 24.5 cm3 . Dry weight 6.29 (24 in) / 6.44 (30 in) kg . Output 0.76 kW / 1.03 ps . Effective cutting length 519 (24 in) / 658 (30 in) mm


. Engine displacement 24.5 cm3 . Dry weight 5.79(30 in) / 6.14(40 in) kg . Output 0.76 kW / 1.03 ps . Effective cutting length 693 (30 in) /1008 (40 in) mm

Double Sided Hedge Trimmers

Single Sided Hedge Trimmers


photo/22DH

Hedge Trimmers

dh220 22dh dh2200St

dh230 dh2510t

ht230 ht2510

4 Stroke

2 Stroke










The Power of Choice

4 Stroke Technology

2 Stroke Technology



・Engine features chrome plated cylinder and 2 ring piston for extended service life.

BORN FOR PRO

Heav y dut y so l id s tee l splined drive shaft.

Ultra convenient "SNAP-M OTI O N" a r t i cu l a te angle adjustment system works in 150 deg with 10-position

Electroless nickel plating keeps sharp cutting edge on the blade by avoiding adherence of resin.

Long Reach Shafted Hedge Trimmers

Short Reach Shafted Hedge Trimmers


Shafted Hedge Trimmers




ah230S

ah242S

ahS242S

ah2510

ahS2510

4 Stroke

2 Stroke










The Power of Choice

4 Stroke Technology

2 Stroke Technology

. Engine displacement 21.1 cm3 . Dry weight*1 3.36 kg . Output 0.6 kW / 0.8 ps . Air volume*2 600 m3/h . Max air Speed 59.0 m/sec

Heavy duty 2-stage air cleaner

Cruise control throttle s y s t e m f o r c o n s t a n t eng ine spe e d du r ing operation.

Covenient sub-grip for operator comfort.

Unique engine layout for best balance and also prevents clothes from being sucked in.

Ultra light weight



Handheld Blowers

*1: Unit with blower pipe *2: At actual usage point

Blowers

. Engine displacement 24.0 cm3 . Dry weight*1 4.2 kg . Output 0.7 kW / 1.0 ps . Air volume*2 522 m3/h . Max air speed 74.2 m/sec


. Engine Displacement 34.0 cm3 . Dry Weight*1 5.6 kg . Output 1.10 kW / 1.50 ps . Air Volume*2 474 (Round pipe), 486 (Flat pipe) m3/h . Max air speed 87 (Round pipe), 86 (Flat pipe) m/sec

eB220S

eB240S eB2510

eB3410

4 Stroke

2 Stroke










The Power of Choice

4 Stroke Technology

2 Stroke Technology

. Engine displacement 73.5 cm3 . Dry weight*1 10.2 kg . Output 3.4 kW / 4.6 ps . Applicable cutting wheel diameter 305 mm

ModelCutting wheel

diameterPart Number Description

EC350 9 in (230 mm)

M618-000040 for Metal

M618-000050

for Concrete

EC7500W 12 in(305 mm)

M618-000010

for Concrete

EC7600W 14 in(355 mm)

M618-000000

for Concrete

・Powerful and durable Shindaiwa backpack blowers for heavy, professional use.

・Powerful blowing performance and comfort for the long use of professionals.

Transmission is enclosed and sealed

Full 6-point anti-vibration system for reduced operator

One-step choke and fast-idle mechanism for easy hot and cold restarts

Heavy-duty, multi-ribbed V-belt for constant grip and reduced slippage


water kitComplete kit includes two water-feed nozzles, shut-off valve, quick-disconnect fitting, and all mounting hardware.

M061-000010 12.7mm (1/2 in.) and 16mm (5/8 in.) hoses

Engine Cutters

“wheeL” kitEasy-to-install kit supports the weight of EC7500 and EC7600 cut-off saws, making the saw easier to handle during flush-cutting.

CSt-eC7500 includes mounting hardware.

Water Kit includedphoto/EC7600W

eC350

Backpack Blowers

enGine Cutter aBraSive wheeLS


. Engine displacement 79.7 cm3 . Dry weight*1 12.5 (φ 74 pipe), 12.6 ( φ 65 pipe) kg

. Output 3.33 kW / 4.53 ps .Air volume*2 1260 ( φ 74 pipe), 1140 ( φ 65 pipe) m3/h

. Max air speed 85 (φ 74 pipe), 95 ( φ 65 pipe) m/sec . Engine displacement 35.5 cm3 . Dry weight*1 7.5 kg . Output 1.6 kW / 2.2 ps . Applicable cutting wheel diameter 230 mm

. Engine displacement 73.5 cm3 . Dry weight*1 10.6 kg . Output 3.4 kW / 4.6 ps . Applicable cutting wheel diameter 355 mm

*1: Unit without specified cutting blade

eB500 eB8520rt

eC7500w

eC7600w

*1: Unit with blower pipe *2: At actual usage point

Sealed recoil starter for long service life

Replacement rope guide

. Engine displacement 22.5 cm3 . Dry weight*1 5.4 kg . Output 0.8 kW / 1.1 ps . Overall length 2805 mm

Positive Coupler

・Powered by Shindaiwa's legendary 22.5cc durable engine

High pressure piston pump sprays mist farther and wider

Extra larger chemical tank holds up to 26 liters of liquid for longer operation time.

Easy-to-use coupler provides a positive connection between the power head and attachments.


Sprayers

Engine Sprayer

Manual Sprayers

*1 : Without spraying hose and nozzle

SP20hPS

SP30BPe

SP45BPe eS726

SP40BPS

Pole Pruner

*1: Without Cutting Attachment

Guide Bar & Chain – PoLe Pruner & MuLti-tooL ModeLSThese bar and chain combinations are intended for Pole Pruners.


. Dry weight*1 9.1 kg . Output 0.6 kW / 0.8 ps . Chemical tank capacity 26 L

. Dry weight*1 2.1 kg . Chemical tank 7.6 L . Maximum Presure 3.2 kgf/cm2




P230S

Guide Bar Saw Chain

Model Gauge (in) Pitch (in) Length (cm) Parts NumberNumber of Drive

LinksOregon Type Part Number

P230S SBA-P24 ATT-P230

0.043 3 / 820 X120-000030 33 90SG X260-00000025 X121-000090 39 90SG X221-00004030 X122-000300 44 90SG X222-000050

Narrow kerf bar and 3/8 inch pitch low profile chain are standard.Choose 20, 25 or 30 cm bar.


. Dry weight 6.2 kg . Hopper capacity 21.2 L




・Discharges up to 250 liters/min・Maximum suction head of 8m・Maximum total pump head of 45m

1.5 inch suc t ion and discharge ports for larger volume pumping

Aluminum die-cast pump housing


Water Pump

GP450

Spreaders

rS76S

rS41

rS76

rS60

. Engine displacement 41.5 cm3 . Dry weight 7.8 kg . Output 1.7 kW / 2.3 ps . Pump Max.discharge 250 L/min

Logo T-Shirt

Logo Polo Shirt

USB Memory (2GB)

36cm

17cm

Promotional bag


Safety GlassesThese stylish safety glasses feature tough impact- and abrasion-resistant lenses. Fully adjustable temples and arms. Thanks to single-piece lenses, these glasses are light weight.

80767 Clear lens.80766 Blue mirror lens.80765 Grey lens.

Safety Helmet Set82002 Designed and manufactured specifically for the commercial end-user.

Durable nylon six-point fabric head harness hel-met, wire mesh face protector, and ear muffs.

Face Protector82003 Designed and manufactured specifically for the commercial end-user.

Durable nylon visor, wire mesh face protector, and ear muffs.

80767

80766

80765

Protective equipment & ApparelOil And Lubricants

LanyardRacing CapC3000058 C3000068

Travel bagC3000065

BackpackC3000063

Shindaiwa OneThis oil is specially formulated to meet ISO-L-EGD and JASO FC standards for use in all 2-cycle and C4 engines. Delivers low smoke, temperature protection, and fuel stabilization. Shindaiwa highly recommends oil that meets

ISO-L-eGD and JASO FC standards for use in all 2-cycle and C4 engines.

Gearcase LubrIcantHandy pump fits five-gallon and 20-liter pails to pro-vide measured quantities of mixing oil with each pump stroke. Delivers 3.38 oz. (100 ml) per stroke.

99909-0010

Gearcase LubrIcantThe best solution for easy gearcase main-tenance on all straight-shaft trimmers and brushcutters. Great for flex-cable lubrication. Complete with easy-to-understand instructions.

13-57 0.8 oz. tube.13-58 10 oz. tube.

Accessories

Shindaiwa Premium Items

Ballpoint Pen Blue Ink Ballpoint Pen Handy Tools

Transparent Sticker

C3000061 C3000105 C3000060

C3000055C3000070

Japan Technology Sticker

Japan Technology Flag

Japan TechnologyLaminated Card

Display Clip

85cm

230cm

Teardrop Banner

150cm 150cm

Shindaiwa Brand Logo Flag6cm

C3000095 XS C3000096 S C3000081 M C3000082 L C3000083 XL C3000084 XXL

C3000099 XS C3000100 S C3000089 M C3000090 L C3000091 XL C3000092 XXL

Gooseneck LED LightC3000076

Part No. PET304

Tachometers

*1 Note: This model can also measure 4-cycle single cylinder engine with ignition system that sparks every crank shaft rotation.

Standard Tachometer

Ignition Checker*1 Ignition Checker*1

CODE: C1032200 Part No. PET4100

CODE:C1027201

Pet-304 Pet-1000r

Pet-4000 Pet-4100

C3000107

C3000069

C3000103 C3000101

C3000071

C3000075

C3000073

Thin Type Tachometer

Display Modules

Shindaiwa display modules offer unlimited opportunities for neat and attractive store displays. The Shindaiwa panel display module transforms into any shape so dealers can maximize floor space while showcasing products.

Optional Feet

Three-panel wire grid displaywithout special legs

Chain saw holder display Clothing and utility display Multi tool display

Optional Hangers


2002 T2500 equipped with the first 4-cycle engine developed by

Shindaiwa

1999 E1039S Evolutional chain saw with vertical mount engine

layout

1999 AH230 wins the "OEM-mie award"

1999 AH230 long reach trimmer equipped with easy head angle

adjustment system

1995 MCD260 wins the "Good Design Award"

1994 PB270E World's first power broom

1993 ECD488, the first engine cutter with dust correction system

1985 EB 4 5 c re a te s b lowe r market

1979 The historical successful model, A 104P, equipped with

automatic filing system.

1978 Electric chain saw A100, introduced to USA market.

1977 E305AV, Shindaiwa's first engine chain saw

1973 A105 electric chain saw for the "Do It Yourself" market.

1965 Thousands of deck saws are exported to Peru

1963 Electr ic chain saw A33 generated nationwide sales

1962 Electr ic chain saw A88 m o v e s S h i n d a i w a i n t o t h e

construction equipment industry.

1955 Shindaiwa's first chain saw "Hurricane"

Product History of Shindaiwa

F o r o v e r 5 0 y e a r s , S h i n d a i w a h a s given outdoor power equipment users optimum performance and durability with comprehensive customer support.As our customers' needs have changed, so has Shindaiwa's product line. But our dedication to quality hasn't wavered a bit, ensuring that each tool is engineered to get the job done - day in and day out.


Specifications

Not all models are available in all markets throughout the world. Also, specifications may change without notice.

Rear Handle Saws305S 352S 360 377 390S 389S 452S 452GS 488 488P

Configuration EU RUS AUS EU AUS, RUS RUS RUS, Korea EU EU, AUS EU, TUR RUS Basic EU EU, TUR RUS PRC Basic Basic

Engine displacement (cm3) 30.5 30.5 30.5 35.2 35.2 35.2 37.7 38.4 38.9 45.1 45.1 45.1 45.1 47.9 47.9 47.9 47.9 47.9Dry weight*1 (kg) 4.0 4.0 4.0 4.2 4.2 4.0 4.3 4.5 4.5 4.6 4.6 4.6 4.8 4.9 4.9 4.9 4.9 5.2Output (kW / ps) 1.1 / 1.5 1.1 / 1.5 1.1 / 1.5 1.42 / 1.93 1.4 / 1.9 1.4 / 1.9 1.65 / 2.24 TBD 1.70 / 2.31 2.26 / 3.07 2.26 / 3.07 2.26 / 3.07 2.26 / 3.07 2.26 / 3.07 2.2 / 3.0 2.2 / 3.0 2.2 / 3.0 2.2 / 3.0Fuel tank capacity (L) 0.25 0.25 0.25 0.40 0.40 0.40 0.40 0.42 0.46 0.54 0.54 0.54 0.54 0.60 0.60 0.60 0.60 0.60 Fuel consumption at maximum engine power (kg / h) 0.59 0.75 0.56 0.94 0.94 − − TBD 1.06 1.09 1.09 1.09 1.09 1.05 1.05 1.05 1.05 −Oil tank capacity (L) 0.26 0.26 0.26 0.25 0.25 0.25 0.25 0.215 0.25 0.27 0.27 0.27 0.27 0.30 0.30 0.30 0.30 0.30 Priming pump ¡ ¡ ¡ − − − − − − − − − − − − − − −Ignition system CDI CDI CDI CDI CDI TCI TCI CDI CDI CDI CDI CDI CDI CDI CDI CDI CDI CDIStart assist system Soft start Soft start Soft start Soft start Soft start − − Soft start Soft start Soft start Soft start Soft start Soft start − − − − −Chain brake Inertia Inertia Inertia Inertia Inertia Manual Manual Inertia Inertia Inertia Inertia Inertia Inertia Inertia Inertia Inertia Inertia InertiaChoke w / automatic fast idle release ¡ ¡ ¡ ¡ ¡ − − ¡ ¡ ¡ ¡ ¡ ¡ − − − − −Chain Tensioner Side Side Side Front Front Front Front Front Front Front Front Front Front Front Front Front Front FrontSaw chain pitch (inch) 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 TBD 0.325 0.325 0.325 0.325 0.325 0.325 0.325 0.325 0.325 0.325 Guide bar gauge (inch) 0.050 0.050 (0.043) 0.050 (0.043) 0.050 0.050 0.050 0.050 TBD 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058

Applicable bar length (cm / inch) 30, 35 / 12, 14 30, 35 / 12, 14 30, 35 / 12, 14 30, 35 / 12, 14 30, 35 / 12, 14 40 / 16 40 / 16 TBD 33, 38, 40 / 13, 15, 16

33, 38, 40, 45 / 13, 15, 16, 18 38 / 15 40, 45 / 16, 18 33, 38, 40, 45

/ 13, 15, 16, 1833, 38, 40, 45, 50 / 13, 15, 16, 18, 20 45 / 18 45, 50 / 18, 20 40, 45, 50 /

16, 18, 2040, 45, 50 / 16, 18, 20

Rear Handle Saws Top Handle Saws490 577 577P 598 600 757 757 757C 269TS 269TCS 320TS

Configuration EU AUS Basic Basic RUS EU RUS AUS, Basic Basic EU EU EUEngine displacement (cm3) 47.9 47.9 57.3 57.3 59.8 59.8 73.5 73.5 73.5 26.9 26.9 32.3Dry weight*1 (kg) 4.8 4.8 5.8 6.1 5.9 6.0 6.8 6.8 6.6 2.9 2.9 3.5Output (kW / ps) 2.28 / 3.10 2.28 / 3.10 2.6 / 3.5 2.6 / 3.5 3.0 / 4.1 3.0 / 4.1 4.06 / 5.52 4.06 / 5.52 4.06 / 5.52 0.86 / 1.17 0.86 / 1.17 1.36 / 1.85Fuel tank capacity (L) 0.60 0.60 0.77 0.77 0.57 0.57 0.77 0.77 0.77 0.24 0.24 0.37Fuel consumption at maximum engine power (kg / h) 1.07 1.07 − − 1.47 1.27 − − − 0.55 0.55 0.76Oil tank capacity (L) 0.30 0.30 0.32 0.32 0.30 0.30 0.36 0.36 0.36 0.16 0.16 0.23Priming pump − − − − − − − − − ¡ ¡ −Ignition system CDI CDI CDI CDI CDI CDI CDI CDI CDI CDI CDI CDIStart assist system − − − − Decomp Decomp − − − Soft start Soft start Soft startChain brake Inertia Inertia Manual Manual Inertia Inertia Manual Manual Manual Inertia Inertia InertiaChoke w / automatic fast idle release ¡ ¡ − − ¡ ¡ − − − ¡ ¡ ¡

Chain Tensioner Side Side Front Front Side Side Front Front Front Side Side SideSaw chain pitch (inch) 0.325 0.325 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 1 / 4 3 / 8Guide bar gauge (inch) 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.050 0.050 0.050

Applicable bar length (cm / inch) 33, 38, 40, 45, 50 / 13, 15, 16, 18, 20

40, 45, 50 / 16, 18, 20

45, 50, 60 / 18, 20, 24

45, 50, 60 / 18, 20, 24 40 / 16 50 / 20 50 / 20 50, 60, 70, 75 /

20, 24, 28, 3045, 50, 60, 70 / 18, 20, 24, 28

25, 30 / 10, 12 25 / 10 30, 35 / 12, 14

P230SConfiguration PRC, BasicEngine displacement (cm3) 22.5Dry weight*1 (kg) 5.4Output (kW / ps) 0.8 / 1.1Overall length (mm) Length with 10"bar assembly 2805Fuel tank capacity (L) 0.55Fuel consumption at maximum engine power (L / h) 0.73Chain oil tank (L) 0.11Start assist system Soft StartGuide bar length (inch) 8, 10, 12Guide bar gauge (inch) 0.043Saw chain pitch (inch) 3 / 8

*1: Without Cutting Attachment



Chain Saws

Chain Saws

Pole Pruner


Specifications


Curved Shaft Trimmers Trimmers BrushcuttersF220 F226S T220 T226S T230XR T242XS T260X T270 T310XS T350 T410S C226S C230 C242S C260 C270

Configuration AUS RUS EU AUS EU AUS EU AUS AUS EU EU, AUS EU EU AUS RUS EU AUS AUSHandle type *1 L L L L L L L L L L L U U U U U UEngine displacement (cm3) 21.1 21.1 21.2 21.1 21.2 22.5 23.9 24.1 27.2 28.9 33.6 41.5 21.2 22.5 22.5 23.9 24.1 27.2Dry weight *2 (kg) 4.2 4.3 4.2 4.2 4.8 4.6 5.1 5.4 5.6 6.1 7.0 8.1 4.9 4.9 4.9 5.1 5.5 6.2Output (kW / ps) 0.69 / 0.94 0.69 / 0.94 0.70 / 0.95 0.69 / 0.94 0.70 / 0.95 0.8 / 1.1 0.8 / 1.1 0.9 / 1.2 1.1 / 1.5 1.0 / 1.4 1.3 / 1.8 1.6 / 2.15 0.70 / 0.95 0.8 / 1.1 0.74 / 1.0 0.8 / 1.1 0.9 / 1.2 1.1 / 1.5Fuel tank capacity (L) 0.53 0.53 0.4 0.53 0.4 0.54 0.62 0.6 0.69 0.75 0.9 0.7 0.4 0.54 0.54 0.62 0.6 0.69Fuel consumption at maximum engine power (L / h) 0.59 0.59 0.46 0.59 0.46 0.75 0.58 − 0.85 0.71 1.08 TBD 0.46 0.75 0.73 0.58 − 0.85Carburetor Type Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm DiaphragmStart assist system − − Soft Start − Soft Start − Soft Start − − Soft Start − Soft Start Soft Start − Soft Start Soft Start − −Drive shaft Type Flexible Flexible Flexible Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid

Diameter (mm) 6 6 6 6 6 6 6 7 7 8 8 8 6 6 6 6 7 7Main Pipe Diameter (mm) 22.2 22.2 25.0 24.0 25.0 24.0 24.0 24.0 26.0 26.0 26.0 28 25.0 24.0 2.4 24.0 24.0 26.0 Gear reduction ratio 1.0 1.0 1.0 1.29 1.36 1.29 1.36 1.36 1.36 1.4 1.24 1.33 1.36 1.29 1.29 1.36 1.36 1.36

BrushcuttersC300 C310S C350 C35LA B450 B45LA B410S CL520 B530 CL590

Configuration Basic RUS EU EU, PRC RUS AUS Basic EU RUSAUS

w / o swivel hanger

AUSw / swivel

hangerBasic EU EU EU Basic EU

Handle type *1 U U U U U U U U U U U U U U U UEngine displacement (cm3) 27.2 27.2 28.9 33.6 33.6 33.6 33.6 41.5 41.5 41.5 41.5 41.5 41.5 51.7 53.2 53.2 58.2Dry weight *2 (kg) 6.2 6.2 6.5 7.7 7.7 7.6 8.0 7.7 7.8 7.8 8.1 8.1 8.7 10.5 9.5 9.4 10.4Output (kW / ps) 1.0 / 1.3 1.0 / 1.3 1.0 / 1.4 1.3 / 1.8 1.35 / 1.8 1.3 / 1.8 1.3 / 1.8 1.6 / 2.2 1.71 / 2.3 1.7 / 2.3 1.7 / 2.3 1.7 / 2.3 1.6 / 2.15 1.8 / 2.4 1.7 / 2.3 2.3 / 3.1 2.4 / 3.3Fuel tank capacity (L) 0.69 0.69 0.75 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.7 1.0 1.2 1.2 0.75Fuel consumption at maximum engine power (L / h) 0.85 0.87 0.71 1.08 1.14 1.08 1.15 1.39 1.26 1.39 1.39 1.25 TBD 1.15 1.31 1.31 1.77Carburetor Type Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm DiaphragmStart assist system − − Soft Start − − − − − − − − − Soft Start − − − −Drive shaft Type Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid Solid

Diameter (mm) 7 7 8 8 8 8 8 10 10 10 10 10 8 10 10 10 10 Main Pipe Diameter (mm) 26.0 26.0 26.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28 35.0 28.0 28.0 35.0 Gear reduction ratio 1.36 1.36 1.4 1.36 1.36 1.36 1.36 1.36 1.36 1.36 1.36 1.36 1.33 1.4 1.36 1.36 1.4

Backpack Brushcutters Clearing Saw Trimmers (C4 Engine) Brushcutters (C4 Engine)BP35 BP40LA BP420S BP520S BP530 RCL590 T2510X T3410 C2510 C3410

Configuration Basic Basic EU EU EU EU EU, AUS EU EU EUHandle type *1 L L L L L U L L U UEngine displacement (cm3) 33.6 33.6 42.7 51.7 53.2 58.2 24.5 34.0 24.5 34.0 Dry weight *2 (kg) 9.7 8.9 11.5 11.6 11.8 10.2 5.2 6.0 5.3 6.4Output (kW / ps) 1.3 / 1.8 1.5 / 2.0 1.7 / 2.3 1.9 / 2.5 1.6 / 2.2 2.4 / 3.3 0.8 / 1.1 1.1 / 1.5 0.8 / 1.1 1.1 / 1.5Fuel tank capacity (L) 1.2 1.2 1.2 1.2 1.2 0.75 0.59 0.75 0.59 0.75Fuel consumption at maximum engine power (L / h) 0.95 0.95 1.20 1.15 1.31 1.77 0.54 0.65 0.54 0.65Carburetor Type Float Float Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm DiaphragmStart assist system − − Soft Start Soft Start − − Decomp Decomp Decomp DecompDrive shaft Type Flexible Flexible Solid Solid Flexible Solid Solid Solid Solid Solid

Diameter (mm) 8 8 8 8 8.2 10 6 7 6 7Main Pipe Diameter (mm) 26.0 26.0 28.0 28.0 26.0 35.0 24.0 26.0 24.0 26.0 Gear reduction ratio 1.24 1.24 1.33 1.33 1.24 1.4 1.29 1.36 1.29 1.36

*1 : Handle type is as shown below table.L Loop HandleU U-Handle*2: Unit without cutting attachment and shield



Trimmers /Brushcutters




Specifications



Handheld Blowers Handheld Blowers (C4 Engine)

Backpack Blowers

Backpack Blowers (C4 Engine)

EB220S EB240S EB2510 EB3410 EB500 EB8520RTConfiguration AUS EU EU EU, AUS Basic EUEngine displacement (cm3) 21.1 24.0 24.5 34.0 43.6 79.7

Dry weight*1 (kg) 3.36 4.2 5.25 5.6 8.7 12.5 ( φ 74 pipe)12.6 ( φ 65 pipe)

Output (kW / ps) 0.6 / 0.8 0.7 / 1.0 0.86 / 1.17 1.10 / 1.50 1.7 / 2.3 3.33 / 4.53Fuel tank capacity (L) 0.6 0.5 0.6 0.6 2.1 2.02Fuel consumption at maximum engine power (L / h) 0.59 0.64 0.58 0.67 1.05 1.63

Air volume (m3 / h) At actual usage point 600 522 426 474 (Round pipe)486 (Flat pipe) 738 1260 ( φ 74 pipe)

1140 ( φ 65 pipe)

Max air speed (m / sec) 59 74.2 79 87 (Round pipe)86 (Flat pipe) 83.6 85 ( φ 74 pipe)

95 ( φ 65 pipe)Start Assist System Soft Start − Decomp Decomp − DecompCruise control throttle system ¡ − ¡ ¡ ¡ ¡

Nozzle type Round Straight + Flat Round Straight Round Straight Round Straight + Flat Round Straight Round Straight( φ 65, 74)

Double Sided Hedge Trimmer Single Sided Hedge Trimmer Shafted Hedge TrimmerDH220 22DH DH2200ST DH230 DH2510T HT230 HT2510 AH230S AH242S AHS242S AH2510 AHS2510

Configuration EU Basic EU, AUS EU PRC Basic EU, AUS EU PRC Basic EU PRC Basic EU EU EU EUEngine displacement (cm3) 21.1 21.1 21.1 22.5 22.5 22.5 24.5 22.5 22.5 22.5 24.5 22.5 22.5 23.9 23.9 24.5 24.5Dry weight (kg) 4.7 4.5 4.6 5.7 5.7 5.5 5.8 6.29 6.44 5.6 5.6 5.5 6.0 5.79 6.14 5.9 5.9 6.2 6.1 6.3 6.2Output (kW / ps) 0.6 / 0.8 0.68 / 0.92 0.59 / 0.80 0.75 / 1.02 0.75 / 1.02 0.8 / 1.1 0.76 / 1.03 0.75 / 1.02 0.75 / 1.02 0.8 / 1.1 0.76 / 1.03 0.8 / 1.1 0.8 / 1.1 0.8 / 1.1 0.8 / 1.1 0.8 / 1.1 0.8 / 1.1Fuel tank capacity (L) 0.4 0.4 0.4 0.6 0.6 0.6 0.55 0.6 0.6 0.7 0.55 0.55 0.55 0.62 0.62 0.6 0.59Fuel consumption at maximum engine power (L / h) 0.62 0.53 0.55 0.64 0.64 0.67 0.53 0.64 0.64 0.67 0.67 0.53 0.64 0.69 0.54 0.54 0.56 0.56Start assist system − − Soft start − − − Decomp − − − Decomp Soft Start Soft Start Soft Start Soft Start Decomp DecompRotatable handle − − ¡ − − − ¡ − − − − − − − − − −Anti-vibration system − − ¡ − − − ¡ − − − − ¡ ¡ ¡ ¡ ¡ ¡

Gear reduction ratio 6.14 6.14 4.60 4.89 4.89 4.89 4.89 3.73 4.89 4.89 4.89 4.89 3.73 6.14 6.14 6.14 6.14 6.14 6.14Blade Cutter Type Double Double Double Double Double Double Double Single Single Single Single Double Double Double Double Double Double

Effective cutting length (mm) 428 521 484 519 519 519 659 519 658 693 693 693 1008 693 1008 520 520 520 520 520 520Pitch (mm) 31 31 35 35 35 35 35 35 35 35 35 35 35 35 35 31 31 31 31 31 31Cutter Clearance Adjustable Adjustable Non-Adjustable Adjustable Adjustable Adjustable Non-Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable

*1 : Unit with blower pipe

Hedge Trimmers

Blowers


Specifications



*1 : unit without attachment

M230 M230S M242S M2510Configuration AUS PRC EU EUEngine displacement (cm3) 22.5 22.5 23.9 24.5Dry weight*1 (kg) 3.9 3.9 4.5 4.6Length*1 (mm) 1020 1025 1040 1040 Output (kW / ps) 0.8 / 1.1 0.8 / 1.1 0.8 / 1.1 0.8 / 1.1Fuel tank capacity (L) 0.55 0.55 0.62 0.60Fuel consumption at maximum engine power (L / h) 0.73 0.73 0.53 0.54Start Assist System − Soft Start Soft Start Decomp

Multi-ToolPower Heads

ES726Configuration AUS, BasicEngine displacement (cm3) 22.5Dry weight*2 (kg) 9.1Output (kW / ps) 0.6 / 0.8Fuel tank capacity (L) 0.60 Fuel consumption at maximum engine power (L / h) 0.48Chemical tank capacity (L) 26Carburetor Type diaphragmPump Type Piston

Maximum Pressure (kgf / cm2) 25Max. discharge (L / min) 7.0

*2 : Unit without spraying hose and nozzle

Engine Sprayer

SP20HPS SP30BPE SP40BPS SP45BPSConfiguration AUS, Basic AUS, Basic AUS, Basic AUS, BasicDry weight*2 (kg) 2.1 5.2 4.8 5.6Chemical tank capacity (L) 7.6 11.4 15.1 17.0 Pump type Piston Piston Piston PistonMaximum Pressure (kgf / cm2) 3.2 6.3 6.3 6.3

*2 : Unit without spraying hose and nozzle

Manual Sprayers

RS41 RS60 RS76 RS76SConfiguration EU, AUS, Basic EU, AUS, Basic EU, AUS, Basic EU, AUS, BasicDry weight (kg) 6.2 10.2 12.1 12.1Hopper capacity (L) 21.2 36.8 36.8 36.8Handle Length (cm) 78.7 78.7 91.4 78.7Tires (mm / inch) 254 / 10 305 / 12 305 / 12 305 / 12

Spreaders

GP450Configuration BasicEngine displacement (cm3) 41.5Dry weight (kg) 7.8Output (kW / ps) 1.7 / 2.3Fuel tank capacity (L) 1.4Fuel consumption at maximum engine power (kg / h) 1.21

Carburetor Type FlortPump Type Rotary

Maximum Pressure (kgf / cm2) 4.9Max. discharge (L / min) 250Total Head Lift (m) 45

Water Pump

EC350 EC7500W EC7600WConfiguration Basic EU EU, AUSEngine displacement (cm3) 35.5 73.5 73.5Dry weight*3 (kg) 7.5 10.2 10.6Output (kW / ps) 1.6 / 2.2 3.4 / 4.6 3.4 / 4.6Fuel tank capacity (L) 0.65 0.8 0.8Fuel consumption at maximum engine power (L / h) − 2.45 2.45Ignition system TCI CDI CDIStart assist system − Decomp DecompApplicable cutting wheel diameter (mm) 230 305 355Installable size of blade inner diameter (mm) 22 20, 22, 25.4 20, 22, 25.4

Engine Cutters

*3 : Unit without specified cutting blade


YAMABIKO Corporation Headquarters house eight divisions that create a total coordination of quality products. Quality products YAMABIKO produces are distributed globally throughout thousands of well trained servicing dealers. Yamabiko Corporation has three plants in Japan: Yokosuka, Morioka, and Hiroshima. YAMABIKO’s overseas plants are located in Illinois, U.S.A. and in Shenzhen, P.R.C. Both plants manufacture ECHO and Shindaiwa products for the global market. products for global market.

YAMABIKO Corporation produces millions of engine powered products annually and aims to increase production volume annually.

The Yokosuka plant houses the foundry department where key components for ECHO and Shindaiwa products are prepared and processed.

ECHO environmentally friendly emission compliance 2-stroke engine components are machined by the latest production engineering technology at the Yokosuka plant.

The Morioka plant machines other key components for ECHO and Shindaiwa products. Morioka plant is the largest assembly plant of YAMABIKO Corporation in Japan and also manufactures agricultural machineries for Japan.

The Hiroshima plant is an important plant for ECHO and Shindaiwa products specializing in trimmer and brushcutter drive trains. The Hiroshima plant, which used to be exclusively Shindaiwa, now plays an important roll helping the company move forward.

ECHO Incorporated is not only a distribution company for ECHO and Shindaiwa products in the U.S.A. but also is the largest assembly plant of the YAMABIKO group. ECHO incorporated not only assembles outdoor power equipment but also made a large number of plastic components for ECHO and Shindaiwa products.

ECHO Machinery (P.R.C.) is a relatively new plant for YAMABIKO Corporation and is rapidly gaining its position as one of the key assembly plant for both ECHO and Shindaiwa products. ECHO Machinery (P.R.C.) is certified for ISO9000 and operates exactly with the same standard as the other YAMABIKO plants.

After a year in planning, YAMABIKO Corporation has entered a new era with the technologies and expertise of two strong companies now integrated into one. The company offers two prominent brands for professional landscaping in the global market. Both brands, ECHO and Shindaiwa, have more than half a century of serving the industry. Their merger provides YAMABIKO with superior strength in both 2-stroke and 4-stroke engine technologies, positioning the company for serving the outdoor power equipment industry well into the future.

YAMABIKO Corporation serves the global outdoor power equipment market through thousands of ECHO and Shindaiwa dealers in more than 80 countries. These well-trained dealers throughout YA M A B IKO’s d i s t r i bu t i on c ha nne l p rov i d e unparalleled customer support with the highest level

of satisfaction. Millions of ECHO and Shindaiwa outdoor power equipment units are in use today tending agricultural fields, forests, gardens and homes.

YAMABIKO Corporation sources its products from three factories in Japan and two factories overseas. All the company’s factories carry the same quality standards and systems needed to manufacture the highest quality products.

YA M A B IKO C o r po ra t i on i s one o f t he f ew manufacturers in i ts industr y that produces most key components in house or th rough affiliated companies.　Its factories operate with an environmental conscience and strive to continually produce environmental-friendly products for global use.

Global Network

YAMABIKO corporation head quarter

Hiroshima plant

ECHO Incorporated

ECHO Machinery Co., Ltd.

Morioka plant

Yokosuka plant

YAMABIKO Corporation's Global Operation


Index

C260 ..................................................17, 25, 45C270 ..................................................17, 25, 45C300 ..................................................17, 25, 44C3000055 .........................................39C3000058..........................................38C3000060 .........................................38C3000061 ..........................................38C3000063 .........................................38C3000065 .........................................38C3000068 .........................................38C3000069 .........................................39C3000070 ..........................................39C3000071 ..........................................39C3000073 ..........................................39C3000075 ..........................................39C3000076 ..........................................38C3000081 ..........................................38C3000082 .........................................38C3000083 .........................................38C3000084 .........................................38C3000089 .........................................38C3000090 .........................................38C3000091 ..........................................38C3000092 .........................................38C3000095 .........................................38C3000096 .........................................38C3000099 .........................................38C3000100 ..........................................38C3000101 ..........................................39C3000103 ..........................................39C3000105 ..........................................38C3000107 ..........................................38C310S ................................................19, 25, 44C3410 ................................................18, 25, 45C350 ..................................................19, 25, 44C35LA ...............................................19, 25, 44CL520 ................................................20, 25, 45CL590 ................................................20, 25, 45DH220 ...............................................27, 46DH2200ST .........................................27, 46DH230 ...............................................27, 46DH2510T ............................................27,46EB220S .............................................31, 46EB240S ..............................................31, 46EB2510 ..............................................31, 46EB3410 ..............................................31, 46EB500 ................................................32, 46EB8520RT .........................................32, 46EC350 ................................................33, 49

EC7500W ..........................................33, 49EC7600W ..........................................33, 49ES726 ................................................35, 48F220...................................................13, 25, 44F226S ................................................13, 25, 44GP450................................................37, 49HT230 ................................................27, 47HT2510 ..............................................27, 47M230 .................................................23, 48M230S ...............................................23, 48M242S ...............................................23, 48M2510 ................................................23, 48P230S ................................................34, 42PET-1000R ........................................39PET-304 .............................................39PET-4000 ..........................................39PET-4100 ...........................................39RCL590 .............................................20, 25, 44RS41 ..................................................36, 48RS60 ..................................................36, 48RS76 ..................................................36, 48RS76S ...............................................36, 48SBA-AH2422 .....................................23SBA-AHS2422 ...................................23SBA-LE24 ..........................................23SBA-P24 ............................................23, 34SBA-PS24 .........................................23, SBA-TX24-1 .......................................23, 25SP20HPS ..........................................35, 48SP30BPE ...........................................35, 48SP40BPS ...........................................35, 48SP45BPE ...........................................35SP45BPS ...........................................48T220 ..................................................13, 25, 44T226S ................................................13, 25, 44T230XR ..............................................13, 25, 44T242XS ..............................................13, 25, 44T2510X ...............................................14, 25, 44T260X ................................................14, 25, 45T270 ...................................................15, 25, 45T310XS ..............................................15, 25, 45T3410 .................................................15, 25, 45T350 ..................................................15, 25, 45T410S .................................................15, 25, 45

#65001 ..............................................23#65002 ..............................................23#65003 ..............................................23#65010 ..............................................23#78703 ...............................................2313-57 .................................................3813-58 .................................................3822DH .................................................27, 46269TCS..............................................10, 11, 43269TS ................................................10, 11, 43305S ..................................................7, 11, 42320TS ................................................10, 11, 43352S ..................................................7, 11, 42360 ....................................................7, 11, 42377 .....................................................7, 11, 42389S ..................................................7, 11, 43390S ..................................................7, 11, 43425001 ...............................................24425003 ..............................................24425015 ...............................................24430001 ..............................................24430002 ..............................................24430003 ..............................................24430005 ..............................................24435001 ..............................................24435003 ..............................................24452GS ...............................................8, 43452S ..................................................8, 11, 43488P ..................................................8, 11, 43488 ....................................................8, 11, 43490 ....................................................8, 11, 42525001 ...............................................24525002 ..............................................24525003 ..............................................24530003 ..............................................24530005 ..............................................24535001 ..............................................24577 .....................................................8, 11, 42577P ..................................................8, 11, 42598 ....................................................9, 11, 42600 ....................................................9, 11, 42620015 ...............................................24624001 ...............................................24624015 ...............................................24626501 ...............................................24626515 ...............................................24757 .....................................................9, 11, 42, 43757C ..................................................9, 11, 4380765 .................................................39

80766 .................................................3980767 .................................................3982002 ................................................3982003 ................................................3999909-0010 .......................................38AH230S .............................................29, 47AH242S .............................................29, 47AH2510 ..............................................29, 47AHS242S ...........................................29, 47AHS2510 ............................................29, 47ATT-AH230 ........................................25, 34ATT-P230...........................................25, 34B410S ................................................18, 25, 45B450 ..................................................19, 25, 45B45LA ...............................................19, 25, 45B530 ..................................................19, 25, 45BP35 ..................................................21, 25, 44BP40LA .............................................21, 25, 44BP420S..............................................21, 25, 44BP520S .............................................21, 25, 44BP530 ................................................21, 25, 44C1027201 ..........................................39C1032200 ..........................................39C2070191 ..........................................24C2070192 ..........................................24C2070193 ..........................................24C2070194 ..........................................24C2070195 ..........................................24C2070196 ..........................................24C2070197 ..........................................24C2070198 ..........................................24C2070199 ..........................................24C2070201 ..........................................24C2070202 ..........................................24C2070203 ..........................................24C2070204 ..........................................24C2070206 ..........................................24C2070207 ..........................................24C2070208 ..........................................24C2070209 ..........................................24C2070210 ..........................................24C2070211 ..........................................24C2070212 ..........................................24C2070213 ..........................................24C2070214 ..........................................24C226S ................................................17, 25, 45C230 ..................................................17, 25, 45C242S ................................................17, 25, 45C2510 ................................................17, 25, 45

Documents

Technology - MOTOR JIKOV · • Good for tree harvesting, firewood and pulpwood cutting, and heavy farm use. Standard Guide BarS (Description code FSN and PRO) • For small gas or