Technical Specifications for 325 Hydraulic Excavators

Technical Specifications

325Hydraulic Excavator

Configurations and features may vary by region. Please consult your Cat® dealer for availability in your area.

Table of Contents

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Swing Mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Hydraulic System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Service Refill Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Sound Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Operating Weights and Ground Pressures . . . . . . . . . . . . . . . . . . . . . . . . .3

Major Component Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Blade Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Working Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Reach Boom Lift Capacities

Counterweight: 8 .3 mt (18,300 lb) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Counterweight: 6 .7 mt (14,770 lb) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Counterweight: 4 .9 mt (10,800 lb) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Bucket Specifications and Compatibility . . . . . . . . . . . . . . . . . . . . . . . . .21

Attachments Offering Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Thumb Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Standard and Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Dealer Installed Kits and Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

2

Engine

Engine Model Cat® C4.4

Net Power – ISO 9249 129 kW 172 hp

Engine Power – ISO 14396 129 kW 174 hp

Bore 105 mm 4 in

Stroke 127 mm 5 in

Displacement 4.4 L 269 in3

Biodiesel capability Up to B20(1)

• Meets U.S. EPA Tier 4 Final emission standards.• Recommended for use up to 4500 m (14,760 ft) altitude with

engine power derate above 3000 m (9,840 ft).• Net power is tested per ISO 9249. Standards in effect at the time

of manufacture.• Net power advertised is the power available at the flywheel when

the engine is equipped with fan, air intake system, exhaust system and alternator.

• Rated speed at 2,200 rpm.(1) Cat engines are compatible with the following renewable, alternative,

and bio-fuels* with lower greenhouse gas emission impact: Up to B20 biodiesel (FAME)** Up to 100% HVO and GTL renewable fuels* Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

** For use of higher blends, consult your Cat dealer.

Swing Mechanism

Swing Speed 11.1 rpm

Maximum Swing Torque 82 kN·m 60,300 lbf-ft

Weights

Operating Weight 26 100 kg 57,500 lb

• Long undercarriage, Reach boom, R2.9B1 (9'6") stick, HD 1.19 m3 (1.56 yd3) bucket, 600 mm (24") HD triple grouser shoes and 4.9 mt (10,800 lb) counterweight + blade.


• Long undercarriage, Reach boom, R2.9B1 (9'6") stick, GD 1.30 m3 (1.7 yd3) bucket, 790 mm (31") HD triple grouser shoes and 6.7 mt (14,770 lb) counterweight.


• Long undercarriage, Reach boom, R2.9B1 (9'6") stick, HD 1.19 m3 (1.56 yd3) bucket, 790 mm (31") HD triple grouser shoes and 8.3 mt (18,300 lb) counterweight.

Track

Optional Track Shoes Width 600 mm 24 in

Optional Track Shoes Width 790 mm 31 in

Number of Shoes (each side) 49

Number of Track Rollers (each side) 8

Number of Carrier Rollers (each side) 2

Drive

Gradeability 35°/70%

Maximum Travel Speed 5.7 km/h 3.5 mph

Maximum Drawbar Pull 201 kN 45,232 lbf

Hydraulic System

Main System – Maximum Flow – Implement

429 L/min 113 gal/min

Maximum Pressure – Equipment – Implement

35 000 kPa 5,075 psi

Maximum Pressure – Equipment – Heavy Lift Mode/Auto Dig Boost

38 000 kPa 5,510 psi

Maximum Pressure – Travel 34 000 kPa 4,930 psi

Maximum Pressure – Swing 27 500 kPa 3,988 psi

Boom Cylinder – Bore 125 mm 5 in

Boom Cylinder – Stroke 1410 mm 56 in

Stick Cylinder – Bore 140 mm 6 in

Stick Cylinder – Stroke 1504 mm 59 in

Bucket Cylinder – Bore 120 mm 5 in

Bucket Cylinder – Stroke 1104 mm 43 in

Service Refill Capacities

Fuel Tank Capacity 313 L 82.7 gal

Cooling System 12 L 3.1 gal

Engine Oil (with filter) 15 L 4.0 gal

Swing Drive 12 L 3.2 gal

Final Drive (each) 4 L 1.1 gal

Hydraulic System (including tank) 230 L 60.8 gal

Hydraulic Tank (including suction pipe)

111 L 29.3 gal

DEF Tank 26 L 6.9 gal

Standards

Brakes ISO 10265:2008

Cab/ROPS ISO 12117-2:2008

FOGS (optional) ISO 10262:1998 Level II

Sound Performance

ISO 6395 (external) 97 dB(A)

ISO 6396 (inside cab) 70 dB(A)

• When properly installed and maintained, the cab offered by Caterpillar, when tested with doors and windows closed according to ANSI/SAE J1166 OCT98, meets OSHA and MSHA requirements for operator sound exposure limits in effect at time of manufacture.

• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.

325 Hydraulic Excavator Specifications

3


Operating Weights and Ground Pressures

600 mm (24 in) HD Triple Grouser Shoes

790 mm (31 in) HD Triple Grouser Shoes

Weight Ground Pressure Weight Ground PressureBase Frame with Track Rollers and Carrier Rollers

Base Machine with 4.9 mt (10,800 lb) Counterweight and Long UndercarriageReach Boom + R2.9B1 (9'6") Stick + 1.19 m3 (1.56 yd3) HD Bucket + Blade + AUX lines (HP + QC)

26 100 kg (57,500 lb)

54.3 kPa (7.9 psi)

26 800 kg (59,000 lb)

42.3 kPa (6.1 psi)

Base Machine with 6.7 mt (14,770 lb) Counterweight and Long UndercarriageReach Boom + R2.9B1 (9'6") Stick + GD 1.30m3 (1.7 yd3) Bucket + AUX lines (HP + QC)

26 000 kg (57,300 lb)

54.1 kPa (7.8 psi)

26 700 kg (58,900 lb)

42.2 kPa (6.1 psi)

Base Machine with 8.3 mt (18,300 lb) Counterweight and Long Undercarriage Reach Boom + R2.9B1 (9'6") Stick + 1.19 m3 (1.56 yd3) HD Bucket + AUX lines (HP + QC)

27 700 kg (61,100 lb)

57.6 kPa (8.4 psi)

28 400 kg (62,600 lb)

44.9 kPa (6.5 psi)

All operating weights include a 90% fuel tank with 75 kg (165 lb) operator .

Major Component Weights

kg lbBase Machine Weight (including upperframe, long undercarriage, boom cylinders, without boom, stick, bucket, stick cylinder, bucket cylinder, tracks, blade, fuel, operator)

With 4.9 mt (10,800 lb) Counterweight (for use with Blade) 17 490 38,500With 6.7 ton (14,770) Counterweight 18 690 41,200With 8.3 mt (18,300 lb) Counterweight 20 250 44,600

Track Shoes:600 mm (24") Width, 12.5 mm (0.49") Thick, HD Triple Grouser Track Shoes 3190 7,000790 mm (31") Width, 12.5 mm (0.49") Thick, HD Triple Grouser Track Shoes with Step Extension for ISO 2867

3860 8,500

Two Boom Cylinders 420 900Weight of 90% Fuel Tank and 75 kg (165 lb) Operator 310 700Blades (including lines, cylinders, frame modifications):

2980 mm (9'9") Width, suitable for use with 4.9 mt (10,800 lb) Counterweight and 600 mm (24") Width Track Shoes

1090 2,400

3170 mm (10'5") Width, suitable for use with 4.9 mt (10,800 lb) Counterweight and 790 mm (31") Width Track Shoes

1130 2,500

Counterweights:4.9 mt Counterweight 4900 10,8006.7 mt Counterweight 6700 14,7708.3 mt Counterweight 8300 18,300

Boom (including lines, pins, stick cylinder):Reach Boom (5.7 m/18'8") 1740 3,800AUX lines (HP + QC) 130 290

Sticks (including lines, pins, bucket cylinder, bucket linkage):Reach Stick (R2.9B1/9'6") 1030 2,300Thumb Ready Stick (R2.9B1/9'6") 1165 2,600AUX lines (HP + QC) 60 130

Buckets (without linkage, with tips and side cutters):1.00 m3 (1.30 yd3) HD 955 2,1001.19 m3 (1.56 yd3) HD 1040 2,3001.30 m3 (1.7 yd3) GD 880 1,900

Quick Couplers:Pin Grabber QC B without Pins 430 940CW QC B without Pins 250 550

Refer to pages 18-19 for a complete list of bucket options .

4


DimensionsAll dimensions are approximate and may vary depending on bucket selection .

43

78

2

5

1

6

910

Boom Option Reach Boom5.7 m (18'8")

Stick Option Reach StickR2.9B1 (9'6")

Undercarriage Type Long1 Machine Height:

Cab Height 3078 mm 10'1"

FOGS Height 3217 mm 10'6"

Guardrails/Handrails Height 3187 mm 10'5"

With Boom/Stick/Bucket Installed 3209 mm 10'5"

With Boom/Stick Installed 2984 mm 9'8"

With Boom Installed 2526 mm 8'3"

2 Machine Length:

With Boom/Stick/Bucket Installed 8888 mm 29'2"

With Boom/Stick Installed 8850 mm 29'0"

With Boom Installed 7782 mm 25'5"

With Blade Installed 9585 mm 31'4"

3 Upperframe Width without Walkways 2987 mm 9'8"

4 Tail Swing Radius:

4.9 mt (10,800 lb) Counterweight 1780 mm 5'8"

6.7 mt (14,770 lb) Countweight 1814 mm 6'0"

8.3 mt (18,300 lb) Counterweight 1814 mm 6'0"

5 Counterweight Clearance 1005 mm 3'3"

6 Ground Clearance 469 mm 1'5"

7 Length to Center of Rollers 3646 mm 12'0"

8 Track Length 4455 mm 14'6"

9 Track Gauge 2380 mm 7'8"

10 Undercarriage Width:

600 mm (24") Shoes 2980 mm 9'8"

790 mm (31") Shoes 3170 mm 10'4"

Bucket Type HD

Bucket Capacity 1.19 m3 1.56 yd3

Bucket Tip Radius 1571 mm 5'2"

Blade DimensionsAll dimensions are approximate .

4

51 2

3

Blade Options 2980 mm 3170 mm(9'8") (10'4")

Recommended Track Shoe Width 600 mm 790 mm(24") (31")

1 Blade Moldboard Height 695 mm 2'3" 695 mm 2'3"

2 Blade Maximum Cutting Edge Rise 581 mm 1'11" 581 mm 1'11"

3 Blade Minimum Cutting Edge Depth 482 mm 1'7" 482 mm 1'7"

4 Blade Edge from Machine Center 2925 mm 9'7" 2925 mm 9'7"

5 Ramp Angle 28.8 degrees 28.8 degrees

5


Working RangesAll dimensions are approximate and may vary depending on bucket selection .

0

1

2

3

4

5

6

7

8

9

10

12

11

6

7

5

4

3

2

1

01234567891011 –1 Meters

Meters

R2.9B1 (9'6")

05101520253035 Feet

15

10

20

5

0

5

10

15

20

25

35

30

Feet

2

3

1

7

4

5

6

Boom Option Reach Boom5.7 m (18'8")

Stick Option Reach StickR2.9B1 (9'6")

Undercarriage Type Long1 Maximum Digging Depth 6700 mm 22'0"

2 Maximum Reach at Ground Line 9780 mm 32'1"

3 Maximum Cutting Height 10 970 mm 36'0"

4 Maximum Loading Height 7900 mm 25'9"

5 Minimum Loading Height 2980 mm 9'8"

6 Maximum Depth Cut for 2440 mm (8'0") Level Bottom 6520 mm 21'4"

7 Maximum Vertical Wall Digging Depth 4880 mm 16'0"

Minimum Working Equipment Radius 2430 mm 8'0"

Bucket Digging Force (ISO)* 150 kN 33,811 lbf

Stick Digging Force (ISO)* 106 kN 23,911 lbf

Bucket Type HD

Bucket Capacity 1.19 m3 1.56 yd3

Bucket Tip Radius 1571 mm 5'2"

*8 .5% Auto Dig Boost pressure not included .

6


7


Reach Boom Lift Capacities – Counterweight: 8.3 mt (18,300 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 600 mm (24") HD Triple Grouser Shoes (Long Undercarriage)

3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft

m ft

9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,350 *11,350 14.177 .5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6 .28

25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.836 .0 m kg *6650 *6650 *6400 *6400 *3950 *3950 7 .35

20.0 ft lb *14,500 *14,500 *14,050 13,800 *8,700 *8,700 24.174 .5 m kg *10 650 *10 650 *8150 *8150 *7050 6250 *6300 4500 *3900 *3900 8 .00

15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 13,450 *12,700 9,600 *8,550 *8,550 26.673 .0 m kg *10 250 9050 *8000 6000 6800 4350 *4000 3750 8 .33

10.0 ft lb *22,100 19,550 *17,350 12,950 14,650 9,400 *8,800 8,250 27.501 .5 m kg *12 050 8600 *8900 5800 6700 4250 *4250 3650 8 .395.0 ft lb *26,050 18,500 *19,300 12,450 14,400 9,150 *9,350 8,050 27.50

0 m kg *7450 *7450 *12 850 8350 9100 5650 6600 4200 *4750 3750 8 .170 ft lb *17,000 *17,000 *27,800 17,950 19,600 12,100 14,200 9,000 *10,450 8,250 27.50

–1 .5 m kg *7750 *7750 *12 400 *12 400 *12 600 8300 9050 5550 6600 4150 *5650 4050 7 .65–5.0 ft lb *17,300 *17,300 *28,100 *28,100 *27,350 17,800 19,450 12,000 *12,700 9,000 *12,400 8,950 25.00–3 .0 m kg *12 900 *12 900 *15 750 *15 750 *11 400 8350 *8450 5600 *7100 4850 6 .76

–10.0 ft lb *28,950 *28,950 *34,150 *34,150 *24,600 17,950 *18,150 12,100 *15,650 10,700 22.50–4 .5 m kg *11 800 *11 800 *8600 *8600 *6850 *6850 5 .32

–15.0 ft lb *25,100 *25,100 *18,100 *18,100 *14,950 *14,950 17.50

ISO 10567

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load . The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007 . They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load . Weight of all lifting accessories must be deducted from the above lifting capacities . Lifting capacities are based on the machine standing on a firm, uniform supporting surface . The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance .

Lift capacity stays with ±5% for all available track shoes .

Always refer to the appropriate Operation and Maintenance Manual for specific product information .



3646 mm (12'0")

R2.9B1 TRS

2380 mm (7'8") 4455 mm (14'6")


m ft

9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,300 *11,300 14.177 .5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6 .28

25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.836 .0 m kg *6600 *6600 *6350 *6350 *3900 *3900 7 .35

20.0 ft lb *14,350 *14,350 *13,850 13,650 *8,650 *8,650 24.174 .5 m kg *10 600 *10 600 *8100 *8100 *6950 6200 *6250 4400 *3850 *3850 8 .00

15.0 ft lb *22,500 *22,500 *17,450 *17,450 *15,100 13,300 *12,650 9,450 *8,500 *8,500 26.673 .0 m kg *10 150 8950 *7900 5950 6750 4300 *3950 3700 8 .33

10.0 ft lb *21,850 19,350 *17,100 12,750 14,500 9,250 *8,700 8,100 27.501 .5 m kg *11 950 8450 *8800 5700 6600 4200 *4250 3600 8 .395.0 ft lb *25,750 18,250 *19,050 12,250 14,250 9,000 *9,300 7,850 27.50

0 m kg *7400 *7400 *12 700 8200 9000 5550 6500 4100 *4700 3650 8 .170 ft lb *16,950 *16,950 *27,500 17,650 19,350 11,900 14,050 8,800 *10,350 8,050 27.50

–1 .5 m kg *7700 *7700 *12 350 *12 350 *12 450 8150 8950 5450 6500 4100 *5600 4000 7 .65–5.0 ft lb *17,200 *17,200 *28,050 *28,050 *27,000 17,550 19,200 11,750 *12,650 8,800 *12,300 8,800 25.00–3 .0 m kg *12 900 *12 900 *15 600 *15 600 *11 250 8250 *8350 5500 *7000 4750 6 .76

–10.0 ft lb *28,900 *28,900 *33,750 *33,750 *24,300 17,700 *17,950 11,900 *15,400 10,500 22.50–4 .5 m kg *11 600 *11 600 *8450 *8450 *6750 *6750 5 .32

–15.0 ft lb *24,750 *24,750 *17,850 *17,850 *14,700 *14,700 17.50

ISO 10567




TRS = Thumb Ready Stick


8



3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")


m ft

9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,350 *11,350 14.177 .5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6 .28

25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.836 .0 m kg *6650 *6650 *6400 *6400 *3950 *3950 7 .35

20.0 ft lb *14,500 *14,500 *14,050 *14,050 *8,700 *8,700 24.174 .5 m kg *10 650 *10 650 *8150 *8150 *7050 6400 *6300 4600 *3900 *3900 8 .00

15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 13,750 *12,700 9,850 *8,550 *8,550 26.673 .0 m kg *10 250 9250 *8000 6150 *6900 4500 *4000 3850 8 .33

10.0 ft lb *22,100 19,950 *17,350 13,250 15,000 9,600 *8,800 8,450 27.501 .5 m kg *12 050 8800 *8900 5900 6850 4350 *4250 3750 8 .395.0 ft lb *26,050 18,950 *19,300 12,750 14,750 9,400 *9,350 8,200 27.50

0 m kg *7450 *7450 *12 850 8550 9300 5750 6750 4300 *4750 3850 8 .170 ft lb *17,000 *17,000 *27,800 18,400 20,050 12,400 14,550 9,200 *10,450 8,450 27.50

–1 .5 m kg *7750 *7750 *12 400 *12 400 *12 600 8450 9250 5700 6750 4250 *5650 4150 7 .65–5.0 ft lb *17,300 *17,300 *28,100 *28,100 *27,350 18,250 19,900 12,250 *12,700 9,200 *12,400 9,200 25.00–3 .0 m kg *12 900 *12 900 *15 750 *15 750 *11 400 8550 *8450 5750 *7100 4950 6 .76

–10.0 ft lb *28,950 *28,950 *34,150 *34,150 *24,600 18,400 *18,150 12,400 *15,650 10,950 22.50–4 .5 m kg *11 800 *11 800 *8600 *8600 *6850 *6850 5 .32

–15.0 ft lb *25,100 *25,100 *18,100 *18,100 *14,950 *14,950 17.50

ISO 10567




9



10



3646 mm (12'0")

R2.9B1 TRS

2380 mm (7'8") 4455 mm (14'6")


m ft

9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,300 *11,300 14.177 .5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6 .28

25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.836 .0 m kg *6600 *6600 *6350 *6350 *3900 *3900 7 .35

20.0 ft lb *14,350 *14,350 *13,850 *13,850 *8,650 *8,650 24.174 .5 m kg *10 600 *10 600 *8100 *8100 *6950 6300 *6250 4500 *3850 *3850 8 .00

15.0 ft lb *22,500 *22,500 *17,450 *17,450 *15,100 13,600 *12,650 9,700 *8,500 *8,500 26.673 .0 m kg *10 150 9150 *7900 6050 *6800 4400 *3950 3750 8 .33

10.0 ft lb *21,850 19,750 *17,100 13,050 *14,800 9,450 *8,700 8,300 27.501 .5 m kg *11 950 8650 *8800 5800 6750 4300 *4250 3650 8 .395.0 ft lb *25,750 18,700 *19,050 12,550 14,550 9,200 *9,300 8,050 27.50

0 m kg *7400 *7400 *12 700 8400 9200 5650 6700 4200 *4700 3750 8 .170 ft lb *16,950 *16,950 *27,500 18,100 19,850 12,200 14,400 9,050 *10,350 8,250 27.50

–1 .5 m kg *7700 *7700 *12 350 *12 350 *12 450 8350 9150 5600 6650 4200 *5600 4100 7 .65–5.0 ft lb *17,200 *17,200 *28,050 *28,050 *27,000 17,950 19,700 12,050 *12,650 9,050 *12,300 9,000 25.00–3 .0 m kg *12 900 *12 900 *15 600 *15 600 *11 250 8400 *8350 5650 *7000 4850 6 .76

–10.0 ft lb *28,900 *28,900 *33,750 *33,750 *24,300 18,100 *17,950 12,200 *15,400 10,800 22.50–4 .5 m kg *11 600 *11 600 *8450 *8450 *6750 *6750 5 .32

–15.0 ft lb *24,750 *24,750 *17,850 *17,850 *14,700 *14,700 17.50

ISO 10567





11




3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")


m ft

9 .0 m kg *5000 *5000 4 .50 30.0 ft lb *11,300 *11,300 14.17 7 .5 m kg *6150 *6150 *5350 *5350 *4200 *4200 6 .28

25.0 ft lb *13,600 *13,600 *10,100 *10,100 *9,300 *9,300 20.83 6 .0 m kg *6650 *6650 *6400 5700 *3900 *3900 7 .35

20.0 ft lb *14,500 *14,500 *14,000 12,300 *8,650 *8,650 24.17 4 .5 m kg *10 650 *10 650 *8150 *8150 *7050 5550 6250 3950 *3900 3550 8 .00

15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 11,950 *12,650 8,450 *8,500 7,850 26.67 3 .0 m kg *10 300 8050 *8000 5350 6100 3850 *4000 3300 8 .33

10.0 ft lb *22,150 17,400 *17,350 11,450 13,150 8,300 *8,750 7,250 27.50 1 .5 m kg *12 100 7600 8350 5100 6000 3750 *4250 3200 8 .39 5.0 ft lb *26,100 16,400 17,950 11,000 12,900 8,050 *9,300 7,000 27.50

0 m kg *7400 *7400 *12 850 7350 8200 4950 5900 3650 *4750 3300 8 .17 0 ft lb *16,950 *16,950 27,650 15,850 17,600 10,650 12,750 7,900 *10,400 7,200 27.50

–1 .5 m kg *7750 *7750 *12 350 *12 350 *12 650 7300 8100 4900 5900 3650 *5600 3550 7 .65 –5.0 ft lb *17,250 *17,250 *28,050 *28,050 *27,400 15,700 17,450 10,500 *12,700 7,850 *12,350 7,850 25.00 –3 .0 m kg *12 900 *12 900 *15 800 14 200 *11 400 7350 8150 4950 6900 4250 6 .76

–10.0 ft lb *28,900 *28,900 *34,250 30,400 *24,650 15,850 17,550 10,650 15,300 9,400 22.50 –4 .5 m kg *11 800 *11 800 *8600 7600 *6850 6050 5 .32

–15.0 ft lb *25,200 *25,200 *18,150 16,350 *15,000 13,650 17.50

ISO 10567





12



3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")


m ft

9 .0 m kg *5000 *5000 4 .50 30.0 ft lb *11,300 *11,300 14.17 7 .5 m kg *6150 *6150 *5350 *5350 *4200 *4200 6 .28

25.0 ft lb *13,600 *13,600 *10,100 *10,100 *9,300 *9,300 20.83 6 .0 m kg *6650 *6650 *6400 5850 *3900 *3900 7 .35

20.0 ft lb *14,500 *14,500 *14,000 12,550 *8,650 *8,650 24.17 4 .5 m kg *10 650 *10 650 *8150 *8150 *7050 5700 *6300 4050 *3900 3650 8 .00

15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 12,250 *12,650 8,700 *8,500 8,050 26.67 3 .0 m kg *10 300 8250 *8000 5450 6300 3950 *4000 3400 8 .33

10.0 ft lb *22,150 17,800 *17,350 11,750 13,500 8,500 *8,750 7,450 27.50 1 .5 m kg *12 100 7800 8550 5250 6150 3850 *4250 3300 8 .39 5.0 ft lb *26,100 16,800 18,450 11,300 13,250 8,250 *9,300 7,200 27.50

0 m kg *7400 *7400 *12 850 7550 8400 5100 6100 3750 *4750 3350 8 .17 0 ft lb *16,950 *16,950 *27,850 16,250 18,050 10,950 13,050 8,100 *10,400 7,400 27.50

–1 .5 m kg *7750 *7750 *12 350 *12 350 *12 650 7500 8350 5000 6050 3750 *5600 3650 7 .65 –5.0 ft lb *17,250 *17,250 *28,050 *28,050 *27,400 16,100 17,900 10,800 *12,700 8,100 *12,350 8,050 25.00 –3 .0 m kg *12 900 *12 900 *15 800 14 550 *11 400 7550 8400 5050 7100 4350 6 .76

–10.0 ft lb *28,900 *28,900 *34,250 31,200 *24,650 16,250 18,050 10,900 *15,650 9,650 22.50 –4 .5 m kg *11 800 *11 800 *8600 7800 *6850 6200 5 .32

–15.0 ft lb *25,200 *25,200 *18,150 16,800 *15,000 14,000 17.50

ISO 10567




13



2.9 m (9'6") 5.7 m (18'8") 600 mm (24") HD Triple Grouser Shoes (Blade – Up in Front)

3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")


m ft

9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,350 *11,350 14.177 .5 m kg *6200 *6200 *5350 5300 *4200 *4200 6 .28

25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.836 .0 m kg *6650 *6650 *6400 5250 *3950 3750 7 .35

20.0 ft lb *14,500 *14,500 *14,050 11,300 *8,700 8,400 24.174 .5 m kg *10 650 *10 650 *8150 7950 *7050 5100 5450 3600 *3900 3250 8 .00

15.0 ft lb *22,700 *22,700 *17,600 17,100 *15,300 10,950 11,700 7,700 *8,550 7,150 26.673 .0 m kg *10 250 7400 7550 4850 5350 3500 *4000 3000 8 .33

10.0 ft lb *22,100 15,900 16,200 10,450 11,450 7,500 *8,800 6,550 27.501 .5 m kg 11 500 6900 7250 4650 5200 3400 *4250 2900 8 .395.0 ft lb 24,700 14,900 15,650 9,950 11,200 7,300 *9,350 6,350 27.50

0 m kg *7450 *7450 11 200 6650 7100 4500 5100 3300 4550 2950 8 .170 ft lb *17,000 *17,000 24,000 14,350 15,250 9,650 11,000 7,100 10,000 6,500 27.50

–1 .5 m kg *7750 *7750 *12 400 *12 400 11 100 6600 7000 4400 5100 3300 5000 3200 7 .65–5.0 ft lb *17,300 *17,300 *28,100 27,150 23,850 14,200 15,100 9,500 11,000 7,100 11,000 7,100 25.00–3 .0 m kg *12 900 *12 900 *15 750 12 900 11 200 6650 7100 4450 6000 3850 6 .76

–10.0 ft lb *28,950 *28,950 *34,150 27,600 24,000 14,350 15,200 9,600 13,300 8,500 22.50–4 .5 m kg *11 800 *11 800 *8600 6900 *6850 5500 5 .32

–15.0 ft lb *25,100 *25,100 *18,100 14,900 *14,950 12,400 17.50

ISO 10567





14


2.9 m (9'6") 5.7 m (18'8") 600 mm (24") HD Triple Grouser Shoes (Blade – Down)

3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")


m ft

9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,350 *11,350 14.177 .5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6 .28

25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.836 .0 m kg *6650 *6650 *6400 5700 *3950 *3950 7 .35

20.0 ft lb *14,500 *14,500 *14,050 12,300 *8,700 *8,700 24.174 .5 m kg *10 650 *10 650 *8150 *8150 *7050 5550 *6300 3900 *3900 3550 8 .00

15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 11,950 *12,700 8,400 *8,550 7,800 26.673 .0 m kg *10 250 8100 *8000 5300 *6900 3800 *4000 3250 8 .33

10.0 ft lb *22,100 17,500 *17,350 11,450 *15,000 8,200 *8,800 7,150 27.501 .5 m kg *12 050 7650 *8900 5100 *7300 3700 *4250 3150 8 .395.0 ft lb *26,050 16,400 *19,300 10,900 *15,900 7,950 *9,350 6,950 27.50

0 m kg *7450 *7450 *12 850 7350 *9450 4900 *7550 3650 *4750 3250 8 .170 ft lb *17,000 *17,000 *27,800 15,850 *20,500 10,600 *16,300 7,800 1*0,450 7,100 27.50

–1 .5 m kg *7750 *7750 *12 400 *12 400 *12 600 7300 *9400 4850 *7250 3600 *5650 3550 7 .65–5.0 ft lb *17,300 *17,300 *28,100 *28,100 *27,350 15,700 *20,350 10,450 *12,700 7,800 *12,400 7,750 25.00–3 .0 m kg *12 900 *12 900 *15 750 14 550 *11 400 7400 *8450 4900 *7100 4200 6 .76

–10.0 ft lb *28,950 *28,950 *34,150 31,150 *24,600 15,850 *18,150 10,550 *15,650 9,300 22.50–4 .5 m kg *11 800 *11 800 *8600 7600 *6850 6050 5 .32

–15.0 ft lb *25,100 *25,100 *18,100 16,400 *14,950 13,600 17.50

ISO 10567




15




3646 mm (12'0")

R2.9B1 TRS

2380 mm (7'8") 4455 mm (14'6")


m ft

9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,300 *11,300 14.177 .5 m kg *6100 *6100 *5300 5200 *4200 *4200 6 .28

25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.836 .0 m kg *6600 *6600 *6350 5200 *3900 3700 7 .35

20.0 ft lb *14,350 *14,350 *13,850 11,150 *8,650 8,250 24.174 .5 m kg *10 600 *10 600 *8100 7850 *6950 5050 5400 3550 *3850 3150 8 .00

15.0 ft lb *22,500 *22,500 *17,450 16,950 *15,100 10,800 11,550 7,550 *8,500 7,000 26.673 .0 m kg *10 150 7300 7450 4800 5250 3450 *3950 2900 8 .33

10.0 ft lb *21,850 15,700 16,000 10,300 11,300 7,350 *8,700 6,400 27.501 .5 m kg 11 400 6800 7200 4550 5150 3300 *4250 2800 8 .395.0 ft lb 24,400 14,600 15,450 9,750 11,050 7,100 *9,300 6,150 27.50

0 m kg *7400 *7400 11 050 6550 7000 4400 5050 3250 4450 2900 8 .170 ft lb *16,950 *16,950 23,700 14,050 15,050 9,400 10,850 6,950 9,850 6,300 27.50

–1 .5 m kg *7700 *7700 *12 350 *12 350 11 000 6450 6900 4300 5050 3200 4900 3150 7 .65–5.0 ft lb *17,200 *17,200 *28,050 26,700 23,500 13,900 14,900 9,300 10,800 6,900 10,800 6,900 25.00–3 .0 m kg *12 900 *12 900 *15 600 12 700 11 050 6550 7000 4350 5900 3750 6 .76

–10.0 ft lb *28,900 *28,900 *33,750 27,150 23,750 14,050 15,000 9,400 13,100 8,300 22.50–4 .5 m kg *11 600 *11 600 *8450 6800 *6750 5400 5 .32

–15.0 ft lb *24,750 *24,750 *17,850 14,650 *14,700 12,200 17.50

ISO 10567






16



3646 mm (12'0")

R2.9B1 TRS

2380 mm (7'8") 4455 mm (14'6")


m ft

9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,300 *11,300 14.177 .5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6 .28

25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.836 .0 m kg *6600 *6600 *6350 5650 *3900 *3900 7 .35

20.0 ft lb *14,350 *14,350 *13,850 12,150 *8,650 *8,650 24.174 .5 m kg *10 600 *10 600 *8100 *8100 *6950 5500 *6250 3850 *3850 3450 8 .00

15.0 ft lb *22,500 *22,500 *17,450 *17,450 *15,100 11,800 *12,650 8,250 *8,500 7,650 26.673 .0 m kg *10 150 8000 *7900 5250 *6800 3750 *3950 3200 8 .33

10.0 ft lb *21,850 17,250 *17,100 11,250 *14,800 8,050 *8,700 7,000 27.501 .5 m kg *11 950 7500 *8800 5000 *7200 3650 *4250 3100 8 .395.0 ft lb *25,750 16,150 *19,050 10,700 *15,650 7,800 *9,300 6,750 27.50

0 m kg *7400 *7400 *12 700 7250 *9350 4800 *7450 3550 *4700 3150 8 .170 ft lb *16,950 *16,950 *27,500 15,550 *20,250 10,350 *16,100 7,600 *10,350 6,950 27.50

–1 .5 m kg *7700 *7700 *12 350 *12 350 *12 450 7150 *9300 4750 *7150 3550 *5600 3450 7 .65–5.0 ft lb *17,200 *17,200 *28,050 *28,050 *27,000 15,400 *20,100 10,200 *12,650 7,600 *12,300 7,600 25.00–3 .0 m kg *12 900 *12 900 *15 600 14 350 *11 250 7250 *8350 4800 *7000 4150 6 .76

–10.0 ft lb *28,900 *28,900 *33,750 30,700 *24,300 15,600 *17,950 10,350 *15,400 9,150 22.50–4 .5 m kg *11 600 *11 600 *8450 7500 *6750 5950 5 .32

–15.0 ft lb *24,750 *24,750 *17,850 16,200 *14,700 13,400 17.50

ISO 10567





17




3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")


m ft

9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,350 *11,350 14.177 .5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6 .28

25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.836 .0 m kg *6650 *6650 *6400 5400 *3950 3900 7 .35

20.0 ft lb *14,500 *14,500 *14,050 11,600 *8,700 8,650 24.174 .5 m kg *10 650 *10 650 *8150 8150 *7050 5250 5600 3700 *3900 3350 8 .00

15.0 ft lb *22,700 *22,700 *17,600 17,500 *15,300 11,250 12,000 7,950 *8,550 7,350 26.673 .0 m kg *10 250 7600 7750 5000 5500 3600 *4000 3050 8 .33

10.0 ft lb *22,100 16,350 16,650 10,750 11,800 7,750 *8,800 6,750 27.501 .5 m kg 11 850 7100 7500 4750 5350 3500 *4250 3000 8 .395.0 ft lb 25,400 15,350 16,100 10,300 11,550 7,500 *9,350 6,550 27.50

0 m kg *7450 *7450 11 550 6850 7300 4600 5300 3400 4700 3050 8 .170 ft lb *17,000 *17,000 24,700 14,800 15,700 9,950 11,350 7,350 10,300 6,700 27.50

–1 .5 m kg *7750 *7750 *12 400 *12 400 11 450 6800 7250 4550 5250 3400 5150 3350 7 .65–5.0 ft lb *17,300 *17,300 *28,100 27,950 24,550 14,650 15,550 9,800 11,350 7,350 11,300 7,300 25.00–3 .0 m kg *12 900 *12 900 *15 750 13 250 *11 400 6850 7300 4600 6150 3950 6 .76

–10.0 ft lb *28,950 *28,950 *34,150 28,400 *24,600 14,800 15,700 9,900 13,700 8,800 22.50–4 .5 m kg *11 800 *11 800 *8600 7100 *6850 5650 5 .32

–15.0 ft lb *25,100 *25,100 *18,100 15,300 *14,950 12,750 17.50

ISO 10567





18



3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")


m ft

9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,350 *11,350 14.177 .5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6 .28

25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.836 .0 m kg *6650 *6650 *6400 6100 *3950 *3950 7 .35

20.0 ft lb *14,500 *14,500 *14,050 13,050 *8,700 *8,700 24.174 .5 m kg *10 650 *10 650 *8150 *8150 *7050 5900 *6300 4200 *3900 3750 8 .00

15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 12,700 *12,700 8,950 *8,550 8,300 26.673 .0 m kg *10 250 8700 *8000 5650 *6900 4100 *4000 3500 8 .33

10.0 ft lb *22,100 18,700 *17,350 12,200 *15,000 8,750 *8,800 7,650 27.501 .5 m kg *12 050 8200 *8900 5450 *7300 3950 *4250 3400 8 .395.0 ft lb *26,050 17,600 *19,300 11,700 *15,900 8,550 *9,350 7,450 27.50

0 m kg *7450 *7450 *12 850 7900 *9450 5250 *7550 3900 *4750 3450 8 .170 ft lb *17,000 *17,000 *27,800 17,050 *20,500 11,350 *16,300 8,350 *10,450 7,600 27.50

–1 .5 m kg *7750 *7750 *12 400 *12 400 *12 600 7850 *9400 5200 *7250 3850 *5650 3800 7 .65–5.0 ft lb *17,300 *17,300 *28,100 *28,100 *27,350 16,900 *20,350 11,200 *12,700 8,350 *12,400 8,300 25.00–3 .0 m kg *12 900 *12 900 *15 750 *15 750 *11 400 7950 *8450 5250 *7100 4500 6 .76

–10.0 ft lb *28,950 *28,950 *34,150 33,750 *24,600 17,050 *18,150 11,300 *15,650 10,000 22.50–4 .5 m kg *11 800 *11 800 *8600 8150 *6850 6450 5 .32

–15.0 ft lb *25,100 *25,100 *18,100 17,600 *14,950 14,600 17.50

ISO 10567




19




3646 mm (12'0")

R2.9B1 TRS

2380 mm (7'8") 4455 mm (14'6")


m ft

9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,300 *11,300 14.177 .5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6 .28

25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.836 .0 m kg *6600 *6600 *6350 5350 *3900 3800 7 .35

20.0 ft lb *14,350 *14,350 *13,850 11,450 *8,650 8,500 24.174 .5 m kg *10 600 *10 600 *8100 8050 *6950 5150 5550 3650 *3850 3250 8 .00

15.0 ft lb *22,500 *22,500 *17,450 17,350 *15,100 11,100 11,850 7,800 *8,500 7,200 26.673 .0 m kg *10 150 7500 7650 4900 5400 3550 *3950 3000 8 .33

10.0 ft lb *21,850 16,150 16,450 10,600 11,650 7,600 *8,700 6,600 27.501 .5 m kg 11 700 7000 7400 4700 5300 3400 *4250 2900 8 .395.0 ft lb 25,100 15,050 15,900 10,050 11,350 7,350 *9,300 6,400 27.50

0 m kg *7400 *7400 11 400 6750 7200 4500 5200 3350 4600 3000 8 .170 ft lb *16,950 *16,950 24,400 14,500 15,500 9,700 11,150 7,150 10,150 6,550 27.50

–1 .5 m kg *7700 *7700 *12 350 *12 350 11 300 6650 7150 4450 5200 3300 5050 3250 7 .65–5.0 ft lb *17,200 *17,200 *28,050 27,500 24,250 14,350 15,350 9,600 11,150 7,150 11,150 7,150 25.00–3 .0 m kg *12 900 *12 900 *15 600 13 050 *11 250 6750 7200 4500 6100 3900 6 .76

–10.0 ft lb *28,900 *28,900 *33,750 28,000 *24,300 14,500 15,450 9,700 13,500 8,600 22.50–4 .5 m kg *11 600 *11 600 *8450 7000 *6750 5550 5 .32

–15.0 ft lb *24,750 *24,750 *17,850 15,100 *14,700 12,550 17.50

ISO 10567






20



3646 mm (12'0")

R2.9B1 TRS

2380 mm (7'8") 4455 mm (14'6")


m ft

9 .0 m kg *5000 *5000 4 .5030.0 ft lb *11,300 *11,300 14.177 .5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6 .28

25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.836 .0 m kg *6600 *6600 *6350 6000 *3900 *3900 7 .35

20.0 ft lb *14,350 *14,350 *13,850 12,900 *8,650 *8,650 24.174 .5 m kg *10 600 *10 600 *8100 *8100 *6950 5850 *6250 4100 *3850 3700 8 .00

15.0 ft lb *22,500 *22,500 *17,450 *17,450 *15,100 12,550 *12,650 8,800 *8,500 8,150 26.673 .0 m kg *10 150 8550 *7900 5600 *6800 4000 *3950 3400 8 .33

10.0 ft lb *21,850 18,450 *17,100 12,000 *14,800 8,600 *8,700 7,500 27.501 .5 m kg *11 950 8050 *8800 5350 *7200 3900 *4250 3300 8 .395.0 ft lb *25,750 17,350 *19,050 11,500 *15,650 8,350 *9,300 7,250 27.50

0 m kg *7400 *7400 *12 700 7800 *9350 5150 *7450 3800 *4700 3400 8 .170 ft lb *16,950 *16,950 *27,500 16,750 *20,250 11,100 *16,100 8,150 *10,350 7,450 27.50

–1 .5 m kg *7700 *7700 *12 350 *12 350 *12 450 7700 *9300 5100 *7150 3800 *5600 3700 7 .65–5.0 ft lb *17,200 *17,200 *28,050 *28,050 *27,000 16,600 *20,100 11,000 *12,650 8,150 *12,300 8,150 25.00–3 .0 m kg *12 900 *12 900 *15 600 15 600 *11 250 7800 *8350 5150 *7000 4400 6 .76

–10.0 ft lb *28,900 *28,900 *33,750 33,300 *24,300 16,750 *17,950 11,100 *15,400 9,800 22.50–4 .5 m kg *11 600 *11 600 *8450 8050 *6750 6350 5 .32

–15.0 ft lb *24,750 *24,750 *17,850 17,350 *14,700 14,400 17.50

ISO 10567





21


Bucket Specifications and Compatibility

LinkageWidth Capacity Weight Fill

Long Undercarriage8.3 mt (18,300 lb) Counterweight

6.7 mt (14,770 lb) Counterweight


No Blade No Blade With Blade Up in FrontReach Boom Reach Boom Reach Boom

mm in m3 yd3 kg lb % R2 .9 (9'6") R2 .9 (9'6") TR 2 .9 m (9'6") R2 .9 (9'6") R2 .9 (9'6") TRPin-On (No Quick Coupler)General Duty B 600 24 0 .55 0 .72 620 1,366 100

B 750 30 0 .75 0 .98 717 1,580 100B 900 36 0 .95 1 .24 793 1,747 100B 1050 42 1 .16 1 .52 848 1,869 100B 1200 48 1 .38 1 .80 924 2,038 100B 1350 54 1 .59 2 .08 1002 2,210 100 X X

General Duty Wide Tips B 600 24 0 .55 0 .72 617 1,360 100B 750 30 0 .75 0 .98 715 1,576 100B 900 36 0 .95 1 .24 791 1,743 100B 1050 42 1 .16 1 .52 861 1,899 100B 1200 48 1 .38 1 .80 938 2,069 100B 1350 54 1 .59 2 .08 1016 2,241 100 X X

Heavy Duty B 600 24 0 .46 0 .60 647 1,426 100B 750 30 0 .64 0 .84 752 1,658 100B 900 36 0 .81 1 .06 835 1,841 100B 1050 42 1 .00 1 .31 892 1,967 100B 1200 48 1 .19 1 .56 975 2,150 100B 1350 54 1 .38 1 .81 1060 2,336 100

Heavy Duty Power B 1050 42 0 .96 1 .26 898 1,980 100B 1200 48 1 .14 1 .49 983 2,167 100

Severe Duty B 600 24 0 .46 0 .61 683 1,506 90B 750 30 0 .64 0 .84 795 1,753 90B 900 36 0 .81 1 .06 885 1,950 90B 1050 42 1 .00 1 .31 948 2,091 90B 1200 48 1 .19 1 .56 1038 2,289 90

Severe Duty Power B 900 36 0 .79 1 .03 853 1,881 90Clean-Up B 1800 72 1 .60 2 .09 979 2,157 100Ditch Cleaning B 1500 60 1 .01 1 .32 651 1,436 100

B 1800 72 1 .24 1 .62 739 1,630 100Ditch Cleaning Tilt B 1500 60 0 .90 1 .18 948 2,090 100

B 1800 72 1 .11 1 .45 1063 2,344 100B 1800 72 1 .40 1 .83 1105 2,437 100B 2000 79 1 .23 1 .61 1132 2,496 100

Maximum load with pin-on (payload + bucket)kg 3780 3690 3360 2900 2805 lb 8,333 8,135 7,408 6,393 6,184

The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled .Capacity based on ISO 7451:2007 .Bucket weight with General Duty tips .

Maximum Material Density:

2100 kg/m3 (3,500 lb/yd3)

1800 kg/m3 (3,000 lb/yd3)

1500 kg/m3 (2,500 lb/yd3)

1200 kg/m3 (2,000 lb/yd3)

900 kg/m3 (1,500 lb/yd3)

X Not Recommended

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products . Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc . may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability . Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick .

(continued on next page)


22

Bucket Specifications and Compatibility (continued)

LinkageWidth Capacity Weight Fill

Long Undercarriage8.3 mt (18,300 lb) Counterweight



No Blade No Blade With Blade Up in FrontReach Boom Reach Boom Reach Boom

mm in m3 yd3 kg lb % R2 .9 (9'6") R2 .9 (9'6") TR 2 .9 m (9'6") R2 .9 (9'6") R2 .9 (9'6") TRWith Pin Grabber CouplerGeneral Duty B 600 24 0 .55 0 .72 620 1,366 100

B 750 30 0 .75 0 .98 717 1,580 100B 900 36 0 .95 1 .24 793 1,747 100B 1050 42 1 .16 1 .52 848 1,869 100B 1200 48 1 .38 1 .80 924 2,038 100B 1350 54 1 .59 2 .08 1002 2,210 100

General Duty Wide Tips B 600 24 0 .55 0 .72 617 1,360 100B 750 30 0 .75 0 .98 715 1,576 100B 900 36 0 .95 1 .24 791 1,743 100B 1050 42 1 .16 1 .52 861 1,899 100B 1200 48 1 .38 1 .80 938 2,069 100B 1350 54 1 .59 2 .08 1016 2,241 100

Heavy Duty B 600 24 0 .46 0 .60 647 1,426 100B 750 30 0 .64 0 .84 752 1,658 100B 900 36 0 .81 1 .06 835 1,841 100B 1050 42 1 .00 1 .31 892 1,967 100B 1200 48 1 .19 1 .56 975 2,150 100B 1350 54 1 .38 1 .81 1060 2,336 100

Heavy Duty Power B 1050 42 0 .96 1 .26 898 1,980 100B 1200 48 1 .14 1 .49 983 2,167 100

Heavy Duty Pin Grabber Performance B 600 24 0 .44 0 .57 682 1,503 100B 750 30 0 .60 0 .79 787 1,735 100B 900 36 0 .76 1 .00 876 1,931 100B 1050 42 0 .93 1 .22 940 2,072 100B 1200 48 1 .11 1 .45 1031 2,272 100B 1350 54 1 .28 1 .67 1122 2,474 100

Severe Duty B 600 24 0 .46 0 .61 683 1,506 90B 750 30 0 .64 0 .84 795 1,753 90B 900 36 0 .81 1 .06 885 1,950 90B 1050 42 1 .00 1 .31 948 2,091 90B 1200 48 1 .19 1 .56 1038 2,289 90

Severe Duty Power B 900 36 0 .79 1 .03 853 1,881 90Clean-Up B 1800 72 1 .60 2 .09 979 2,157 100Ditch Cleaning B 1500 60 1 .01 1 .32 651 1,436 100

B 1800 72 1 .24 1 .62 739 1,630 100Ditch Cleaning Tilt B 1500 60 0 .90 1 .18 948 2,090 100

B 1800 72 1 .11 1 .45 1063 2,344 100B 1800 72 1 .40 1 .83 1105 2,437 100B 2000 79 1 .23 1 .61 1132 2,496 100

Maximum load with coupler (payload + bucket)kg 3358 3268 2938 2478 2383 lb 7,404 7,205 6,478 5,463 5,254

The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled .Capacity based on ISO 7451:2007 .Bucket weight with General Duty tips .

Maximum Material Density:

2100 kg/m3 (3,500 lb/yd3)

1800 kg/m3 (3,000 lb/yd3)

1500 kg/m3 (2,500 lb/yd3)

1200 kg/m3 (2,000 lb/yd3)

900 kg/m3 (1,500 lb/yd3)

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products . Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc . may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability . Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick .

23


PIN-ON ATTACHMENTSUndercarriage L L L with Blade Down L with Blade Up In FrontCounterweight 8.3 mt

(18,300 lb)6.7 mt

(14,770 lb)4.9 mt

(10,800 lb)4.9 mt

(10,800 lb)Boom Type Reach Reach Reach ReachStick Length 2.9 m

(9'6")2.9 m

(9'6") TR2.9 m (9'6")

2.9 m (9'6")

2.9 m (9'6") TR

2.9 m (9'6")

2.9 m (9'6") TR

Hydraulic Hammers H120 GC H120 GC S H120 S H130 GC H130 GC S H130 S † † †

Multi-Processors MP318 Concrete Cutter Jaw MP318 Demolition Jaw MP318 Pulverizer Jaw MP318 Shear Jaw MP318 Universal Jaw

Demolition and Sorting Grapples

G318 G318 WH-800 G318 WH-1100 G324 G324 WH-1500 *

Mobile Scrap and Demolition Shears

S3025 S3025 Flat Top

Pulverizers P218 Secondary Pulverizer P318 Primary Pulverizer

Compactors (Vibratory Plate)

CVP110

Mulchers HM4015 Standard HM4015 Bite Limiter

Orange Peel Grapples GSH420-500GSH420-600GSH420-750GSH425-750GSH425-950GSH425-1150GSH520-500GSH520-600GSH520-750GSH525-750GSH525-950GSH525-1150

Attachments Offering GuideNot all Attachments are available in all regions . Consult your Cat dealer for configurations available in your region .

Match Working range front only Allowed usage on machine less than 50% No Match 1800 kg/m3

(3,000 lb/yd3)1200 kg/m3 (2,000 lb/yd3) * †


24

CAT PIN GRABBER COUPLER ATTACHMENTSUndercarriage L L L with Blade Down L with Blade Up In FrontCounterweight 8.3 mt

(18,300 lb)6.7 mt

(14,770 lb)4.9 mt

(10,800 lb)4.9 mt

(10,800 lb)Boom Type Reach Reach Reach ReachStick Length 2.9 m

(9'6")2.9 m

(9'6") TR2.9 m (9'6")

2.9 m (9'6")

2.9 m (9'6") TR

2.9 m (9'6")

2.9 m (9'6") TR

Hydraulic Hammers H120 GC † † † † H120 GC S † † † † H120 S † † † † H130 GC † †H130 GC S † † †* †*H130 S † † † †

Multi-Processors MP318 Concrete Cutter Jaw * *MP318 Demolition Jaw * *MP318 Pulverizer Jaw * *MP318 Shear Jaw MP318 Universal Jaw * * * *

Demolition and Sorting Grapples

G318 * *G318 WH-800 G318 WH-1100

Mobile Scrap and Demolition Shears S3025 * *

Pulverizers P218 Secondary Pulverizer *P318 Primary Pulverizer *

Compactors (Vibratory Plate) CVP110

Mulchers HM4015 Standard HM4015 Bite Limiter

TRS18 (PIN-ON TOP/S70 BOTTOM) ATTACHMENTSUndercarriage L L L with Blade Up In FrontCounterweight 8.3 mt (18,300 lb) 6.7 mt (14,770 lb) 4.9 mt (10,800 lb)Boom Type Reach Reach ReachStick Length 2.9 m (9'6") 2.9 m (9'6") TR 2.9 m (9'6") 2.9 m (9'6") 2.9 m (9'6") TRHydraulic Hammers H115 S

H120 GC S † † † H120 S † † †

Compactors (Vibratory Plate)

CVP75 CVP110

BOOM-MOUNT ATTACHMENTSUndercarriage L L with Blade Down L with Blade Up In FrontCounterweight 8.3 mt (18,300 lb) 4.9 mt (10,800 lb) 4.9 mt (10,800 lb)Boom Type Reach Reach ReachMobile Scrap and Demolition Shears

S2050 S3035 S3035 Flat Top

Attachments Offering Guide (continued)Not all Attachments are available in all regions . Consult your Cat dealer for configurations available in your region .

Match * Working range front only † Allowed usage on machine less than 50% No Match

25


Thumb SpecificationsNot all Attachments are available in all regions . Consult your Cat dealer for configurations available in your region .

Match No Match

Bucket TypeTooth

Quantity

Pro Plus Pro Still Link UtilityWidth

Pin-0nCat Pin Grabber Pin-0n

Cat Pin Grabber Pin-0n

Cat Pin Grabber Pin-0n

Cat Pin Grabbermm in

General Duty 5 902 36 5 1,056 42 6 1,208 48 7 1,350 54

Heavy Duty 5 902 36 5 1,056 42 6 1,208 48 7 1,350 54

Heavy Duty Power 5 1,056 42 6 1,208 48

Severe Duty 5 902 36 5 1,056 42 6 1,208 48

Pin Grabber Performance Buckets

5 902 36 5 1,056 42 6 1,208 48 7 1,350 54


26

Standard and Optional EquipmentStandard and optional equipment may vary . Consult your Cat dealer for details .

Standard Optional

CABROPS, standard sound suppression

High-resolution 254 mm (10") LCD touchscreen monitor

Additional high-resolution LCD touchscreen monitor for Cat Grade Advanced 2D and 3D

Automatic bi-level air conditioner

Jog dial and shortcut keys for monitor control

Keyless push-to-start engine control

Height-adjustable infinite, with no tool

Tilt-up left-side console

Cat Stick Steer

Heated seat with air-adjustable suspension

51 mm (2") orange seat belt

Bluetooth® integrated radio (including USB, aux port and microphone)

2 × 12V DC outlets

Document storage

Rear head storage net and lunchbox storage net

Cup and bottle holders

Openable two-piece front window

Upper radial wiper with washer

Openable polycarbonate skylight hatch

LED dome light

Floor welcome light

Roller front sunscreen

Roller rear sunscreen

Rear window emergency exit

Washable floor mat

Beacon ready

Standard Optional

CAT TECHNOLOGYCat Product Link™

Work tool recognition

Work tool tracking*

Laser catcher

Cat Grade with 2D and offset memory

Cat Grade with Advanced 2D

Cat Grade with 3D connectivity: – Compatibility with radios and base

stations from Trimble, Topcon, and Leica

– Capability to install 3D grade systems from Trimble, Topcon, and Leica

Cat Assist: – Grade Assist– Boom Assist– Bucket Assist– Swing Assist– Lift Assist

Cat Payload: – Static weigh– Semiautomatic calibration– Payload/cycle information– USB reporting capability

2D E-Fence: – E-ceiling– E-floor– E-swing– E-wall– E-cab avoidance

Auto hammer stop

Remote Services capability

**Paired with PL161 attachment locator .


27

325 Standard and Optional Equipment

Standard and Optional Equipment (continued)Standard and optional equipment may vary . Consult your Cat dealer for details .

Standard Optional

ENGINEThree selectable modes: Power, Smart, Eco

4500 m (14,760 ft) altitude capability with engine power derate above 3000 m (9,840 ft)

50° C (122° F) high-ambient cooling capacity without derate

–18° C (0° F) cold start capability

Sealed double element air filter with integrated precleaner

1 × 145 amp dual alternator

Electric fuel priming pump

Reversible electric cooling fans

Two-stage fuel filtration system with water separator and indicator

HYDRAULIC SYSTEMElectric main control valve

Auto Dig Boost

Auto heavy lift

Boom and stick regeneration circuits

Automatic hydraulic oil warm up

Automatic two-speed travel

Boom and stick drift reduction valve

CRN compliant accumulator

Tandem type electronic main pump

Element type main hydraulic filter

Standard Optional

UNDERCARRIAGE AND STRUCTURESBase frame with standard track rollers and standard carrier rollers

Tie-down points on base frame (ISO 15818 compliant)

Grease lubricated track

Segmented track guiding guards

HD bottom guards

HD travel motor guards

Swivel guard

4.9 mt (10,800 lb) counterweight

6.7 mt (14,770 lb) counterweight*

8.3 mt (18,300 lb) counterweight*

600 mm (24") triple grouser track shoes

790 mm (31") triple grouser track shoes with step extension for ISO 2867

2980 mm (9'9") blade

3170 mm (10'5") blade

BOOM, STICKS AND LINKAGE5.7 m (18'8") Reach boom

2.9 m (9'6") Reach stick

2.9 m (9'6") thumb ready stick

Bucket linkage, B1 family with lifting eye, Cat Grade

*Not compatible with blade .


325 Standard and Optional Equipment

28

Standard and Optional Equipment (continued)Standard and optional equipment may vary . Consult your Cat dealer for details .

Standard Optional

ELECTRICAL SYSTEMLED chassis light, left-hand/right-hand boom lights, cab lights – 1,800 lumens

Centralized electrical disconnect switch

Programmable time-delay working lights

Premium surround lighting package

SERVICE AND MAINTENANCESampling ports for Scheduled Oil Sampling (S·O·SSM)

Grouped location for engine oil and fuel filters

Ground-level second dipstick for engine oil

Standard Optional

SAFETY AND SECURITYRear and right-hand-sideview cameras

360° visibility

Right-hand handrail and handhold (ISO 2867 compliant)

Service platform with anti-skid plate and countersunk bolts

Hydraulic lock out lever

Ground-level accessible secondary engine shutoff switch

Signaling/warning horn

Falling object guard system

29

325 Attachments

CAB• Left-hand electrical pedal (two-way)

for tool control• Right-hand electrical pedal (two-way)

for tool control• Dual exit rear window kit

(Canadian regulation)• Rain protector plus cab light cover• Front windshield laminated glass

(P5A glass)• Key fob for use with Bluetooth receiver

SAFETY AND SECURITY• 76 mm (3") retractable seat belt

GUARDS• Mesh guard full front• Mesh guard lower half front• Cab vandalism guard

Dealer Installed Kits and AttachmentsAttachments may vary . Consult your Cat dealer for details .

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com

© 2021 CaterpillarAll rights reserved

Materials and specifications are subject to change without notice . Featured machines in photos may include additional equipment . See your Cat dealer for available options .

CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Corporate Yellow,” the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission .

AEXQ2732-03 (08-2021) Replaces AEXQ2732-02

Build Number: 07C (N Am)

Documents

Technical Specifications for 325 Hydraulic Excavators