TECHNICAL I Catalogue ndex · 4 info - pumps 1 800 361-1820 10 gpm 4” submersible deep well 1/2hp

I N F O - P U M P S 1 8 0 0 3 6 1 - 1 8 2 0 W W W . B U R C A M . C O M 1

SERIES 100: 4” DEEP WELL PUMPS: 5, 7, 10, 25, 55 & 85 GPMAll Stainless Steel; 2 wire, 3 wire. Performance charts. 2-5Noryl & Stainless Steel; 2 wire, 3 wire. Performance charts. 6-13Accessories. 14-16

SERIES 300: UTILITY PUMPS: GENERAL DUTYManual, Automatic. Performance charts. 17-18Gas Driven, Condensate, Drill. 19-20Yard Hydrants and general purpose. 21-22

SERIES 300: SUMP PUMPS:Back-up system, Effluent. Performance charts. 23-241/4, 1/3 & 1/2 HP, Sump. Performance charts. 25-28Mechanical /vertical type. Switches and accessories 291/3 HP, Column. Performance charts. 30Accessories series 300. 31

SERIES 300: LAUNDRY TUB PUMPS1/3 HP, Performance charts. 32

SERIES 400: SEWAGE PUMPS: EASY FLUSH, GRINDER & SEWAGE PACKAGES4/10, 1/2 HP, Performance charts. 33Higher performance Sewage, System & Grinder. Performance charts. 35-37Easy-Flush System. 38

SERIES 500: JET PUMPS: 1/2, 3/4HPCast iron; Shallow well, Systems and Sprinkler. Performance charts. 39-40Stainless steel; Shallow well, Systems and Sprinkler. Performance charts. 41-42Cast iron, Convertible, System. Performance charts. 43-44Jet accessories. 45-49

SERIES 600: BLADDER & DIAPHRAGM TANKSInterchangeable Bladder, capacities. Information charts. 50-52Diaphragm type, capacities. Technical charts. 53Typical installation. Accessories. 54-55

SERIES 700: HEAVY DUTY IRRIGATION PUMPS: 1.5 & 2.0 HP1.5 & 2.0 HP, Performance charts. 56

ADDITIONAL TECHNICAL INFORMATION 57-64

In d e xTECHNICAL

Catalogue Pages

WWW.BURCAM.COM

I N F O - P U M P S 1 8 0 0 3 6 1 - 1 8 2 0 W W W . B U R C A M . C O M2

WWW.BURCAM.COM

PU M P SPU M P S

5, 10, 25GPMGPM

4” SUBMERSIBLEDEEP WELL

Recommended for homes, cottages and farmsfor installation in water wells which are 4” orlarger in diameter

Al lAl lStainlessStainless

SteelSteelSer iesSer ies

Electrical diagram

installation

3 wire G G

To pump

From distribution

2 wire

NOT INCLUDED AND RECOMMENDED:

- Pitless adaptor. - Suspension cable. - Torque arrestor. - Pressure relief valve. - Well cap .

All 2 wire motors are

equipped withBIAC startingswitch which

provides reverseimpact torque to aid starting

in adverse environments

3450 rpm Franklin Electric motor, 2 or 3 wire with external ground wire, 115V or 230V, 1 PH, 60Hz,thermally protected. Built-in lightning arrestor.

Made of non-corrosive 316 stainless steel material.

NEMA standard stainless steel interchangeable pump end.

Built-in check valve.

Precision machined stainless steel impellers and diffusers.

Built-in suction screen to prevent pump damagefrom abrasive material.

Large cable guard to accommodate motor lead.

Built-in safety rope adaptor.

Manufactured for long term endurance and performance.

SUB-PACS CONTAIN:- Submersible pump. - Control box (if required).- Splice kit. - LOP pressure switch.- Pressure gauge. - Bronze tank tee. - Submersible cable attached to motor lead


WWW.BURCAM.COM


Performance charts

All Stainless Steel

3/4 HPPSI 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’ 325’ 350’ 400’0 448 434 420 402 384 359 350 332 313 267

20 444 430 416 401 387 370 352 334 315 293 268 20330 442 427 414 399 385 371 354 336 319 296 268 238 15640 425 412 397 383 369 355 337 320 299 274 241 200 8650 410 395 387 366 353 339 319 300 267 247 205 USGPH

1.0 HPPSI 160’ 180’ 200’ 225’ 250’ 275’ 300’ 325’ 350’ 400’ 450’ 500’ 550’0 447 439 418 398 390 373 358 331 299 257 191

20 444 433 421 413 392 378 363 349 336 314 263 201 12030 431 419 407 392 378 363 350 336 320 286 237 164 7540 418 406 395 380 366 352 337 321 305 268 206 11850 404 393 381 366 352 338 322 305 288 244 171 USGPH

1.5HPPSI 180’ 200’ 225’ 250’ 275’ 300’ 325’ 350’ 400’ 450’ 500’ 550’ 600’0 444 429 419 407 395 371 347 320 291 257

20 445 433 420 408 397 384 372 349 323 294 256 21230 444 435 422 409 397 384 372 361 337 310 279 235 18440 433 422 410 398 385 374 362 350 325 296 261 210 14950 421 410 399 386 375 363 351 338 311 281 242 USGPH

Technical InformationMODEL Stages HP Volts Wire Motor

lead

101124 13 1/2 115 2 48”

101125 13 1/2 115 3 48”

101126 13 1/2 230 2 48”

101127 13 1/2 230 3 48”

101074 13 1/2 230 3 200’

101134 18 3/4 230 2 48”

101135 18 3/4 230 3 48”

101059 18 3/4 230 3 250’

101144 22 1.0 230 2 48”

101145 22 1.0 230 3 48”

101156 26 1.5 230 2 48”

101154 26 1.5 230 3 48”

SUBSUB--PPACAC

SUBSUB--PPACAC

Best efficiency 20/40 120’ @ 218’30/50 97’ @ 195’

Best efficiency 20/40 183’ @ 337’30/50 160’ @ 314’

Best efficiency 20/40 300’ @ 536’30/50 277’ @ 513’

Best efficiency 20/40 246’ @ 435’30/50 223’ @ 412’

5GPMGPM

PU M P S

1/2 HPPSI 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’ 325’0 444 425 405 385 366 341 315 286 244 178

20 458 439 419 399 380 360 340 320 290 252 204 12330 436 416 396 377 357 338 316 295 256 206 13740 413 394 374 355 334 314 289 263 210 13950 392 371 352 332 310 287 254 220 145 USGPH


WWW.BURCAM.COM

10GPMGPM


1/2 HPPSI 0’ 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’0 889 842 783 719 659 596 524 364

20 877 824 763 700 638 576 496 364 12830 869 816 754 691 630 565 480 336 7740 806 743 681 620 554 462 30550 734 671 610 542 443 271 USGPH

3/4 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 899 869 830 785 738 691 633 573 463

20 891 858 817 771 723 676 631 584 528 454 33930 887 853 810 763 716 669 624 576 519 408 223 6840 882 846 803 756 709 663 616 568 508 423 24250 840 796 749 701 655 609 560 497 385 267 USGPH

1.0 HPPSI 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’ 325’ 350’ 400’0 885 857 824 787 740 693 647 601 546 467 237

20 877 847 813 776 738 700 655 609 559 495 391 26330 842 807 771 733 695 658 612 562 499 413 255 7040 802 764 723 689 652 616 565 505 418 290 9050 759 720 684 647 610 571 510 426 294 104 USGPH

1.5HPPSI 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’ 325’ 350’ 400’ 450’ 500’0 895 878 864 822 790 757 722 689 624 551 440

20 890 873 852 827 798 762 728 694 661 628 560 456 26730 869 847 825 787 765 731 697 664 631 595 520 387 17840 844 820 794 768 733 699 666 634 600 562 471 29550 816 790 763 736 702 669 637 603 567 522 408 USGPH

2.0 HPPSI 225’ 250’ 275’ 300’ 325’ 350’ 400’ 450’ 500’ 550’ 600’ 650’ 700’0 882 864 843 819 794 742 689 639 571 525 420 297

20 867 846 819 798 772 746 693 643 589 523 446 329 9130 848 825 800 774 748 721 670 619 563 485 392 23440 826 802 776 750 725 697 646 594 533 43932450 803 778 752 726 699 673 622 568 497 382239 USGPH

Performance charts


lead

101129 9 1/2 115 2 48”

101123 9 1/2 115 3 48”

101130 9 1/2 230 2 48”

101128 9 1/2 230 3 48”

101161 9 1/2 230 2 150’

101151 9 1/2 230 3 150’

101131 12 3/4 230 2 48”

101136 12 3/4 230 3 48”

101162 12 3/4 230 2 200’

101152 12 3/4 230 3 200’

101147 15 1.0 230 2 48”

101146 15 1.0 230 3 48”

101163 15 1.0 230 2 200’

101153 15 1.0 230 3 200’

101158 21 1.5 230 2 48”

101155 21 1.5 230 3 48”

101165 27 2.0 230 3 48”

SUBSUB--PPACAC

SUBSUB--PPACAC

SUBSUB--PPACAC

SUBSUB--PPACAC

SUBSUB--PPACAC

SUBSUB--PPACAC

4

Best efficiency 20/40 73’ @ 123’30/50 50’ @ 100’

Best efficiency 20/40 114’ @ 198’30/50 91’ @ 175’

Best efficiency 20/40 156’ @ 267’30/50 133’ @ 244’

Best efficiency 20/40 234’ @ 406’30/50 203’ @ 383’

Best efficiency 20/40 313’ @ 545’30/50 290’ @ 522’

PU M P SAll Stainless Steel


WWW.BURCAM.COM


25GPMGPMPerformance charts


lead

101137 5 3/4 230 2 48”

101138 5 3/4 230 3 48”

101149 7 1.0 230 2 48”

101148 7 1.0 230 3 48”

101159 9 1.5 230 2 48”

101157 9 1.5 230 3 48”

101167 11 2.0 230 3 48”

3/4 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’0 2173187415061139 626

20 207418001375 950 47230 17061418 772 12640 1229 740 36850 635 USGPH

1.0 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’0 1974179515331271 798 320

20 20901911173814441155 656 15830 2079188516701454 819 60440 1853167413441018 51550 15961355 898 441 USGPH

1.5HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 300’0 2027189017591559 1359 939 493

20 19851848171214911276 913 55630 1968183216641491 1192 893 49440 1942180016591422 1181 809 43050 19271790160614181097 772 388 USGPH

2.0 HPPSI 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’0 20841958184817381580 13551040 669 210

20 20481926 1811 1701152713551021 653 24030 20161911 18061664152312971066 677 33140 20051895 1775 1659 1470 12861044 719 29950 2006189517751659147012861002 719 336 USGPH

Best efficiency 20/40 25’ @ 43’30/50 2’ @ 20’

Best efficiency 20/40 85’ @ 122’30/50 62’ @ 99’

Best efficiency 20/40 55’ @ 73’30/50 32’ @ 50’

Best efficiency 20/40 116’ @ 172’30/50 93’ @ 149’

PU M P SAll Stainless Steel


WWW.BURCAM.COM

10GPMGPM



StainlessStainlessSteelSteel

shel l withshel l with

Noryl Noryl suct ion & suct ion & discharge,discharge,impel lers &impel lers &

di f fusersdi f fusers



Suction and discharge made from non corrosive resistant polypropylene.


Built-in spring loaded check valve.

Precision machined Noryl impellers and diffusers.

Built-in suction screen to prevent pump damagefrom abrasive material.



1 1/4” stainless steel threaded insert.


SUB-PACS CONTAIN:- Submersible pump - Control box (if required).- Splice kit. - LOP pressure switch.- Pressure gauge. - Bronze tank tee. - Submersible cable attached to motor lead

Electrical diagram

installation

3 wire G G

To pump

Fromdistribution

2 wire







PU M P S


WWW.BURCAM.COM



lead

105335ST 6 1/2 115 2 48”

105305ST 6 1/2 115 3 48”

105337ST 6 1/2 230 2 48”

105307ST 6 1/2 230 3 48”

105561ST 6 1/2 230 2 150’

105551ST 6 1/2 230 3 150’

105339ST 8 3/4 230 2 48”

105309ST 8 3/4 230 3 48”

105362ST 8 3/4 230 2 200’

105352ST 8 3/4 230 3 200’

105333ST 11 1.0 230 2 48”

105313ST 11 1.0 230 3 48”

105363ST 11 1.0 230 2 200’

105353ST 11 1.0 230 3 200’

105336ST 17 1.5 230 2 48”

105316ST 17 1.5 230 3 48”

SUBSUB--PPACAC

SUBSUB--PPACAC

SUBSUB--PPACAC

SUBSUB--PPACAC

SUBSUB--PPACAC

SUBSUB--PPACAC

10GPMGPM1/2 HP

PSI 0’ 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’0 890 840 770 690 640 555 450 300

20 875 819 746 675 615 524 414 28830 868 809 734 668 602 508 396 25240 798 722 660 589 492 378 21650 710 653 576 476 360 180 USGPH

3/4 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 890 865 830 800 760 720 670 610 530 400

20 883 855 821 788 748 705 656 607 543 421 23230 879 849 817 782 742 698 648 597 533 431 24840 844 812 776 736 690 641 588 520 416 26450 808 770 730 683 634 578 504 400 240 80 USGPH

1.0 HPPSI 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’ 325’ 350’ 400’0 840 815 790 755 710 660 605 550 490 410 320

20 833 808 780 744 708 668 614 559 500 423 372 327 16430 804 774 739 702 662 618 563 504 429 376 331 25540 769 733 696 656 612 568 509 436 379 334 262 17750 728 690 649 605 561 514 442 383 338 269 184 USGPH

1.5HPPSI 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’ 325’ 350’ 400’ 450’ 500’0 880 860 845 825 795 760 725 690 655 600 515 420

20 856 840 824 800 766 731 696 661 632 604 522 428 21830 838 820 796 768 733 698 663 634 607 568 479 336 12440 817 792 764 736 701 666 636 609 571 529 435 23550 788 760 732 704 669 639 611 575 532 487 354 USGPH

Performance charts

Best efficiency 20/40 70’ @ 118’30/50 47’ @ 97’

Best efficiency 20/40 92’ @ 173’30/50 69’ @ 150’

Best efficiency 20/40 125’ @ 217’30/50 102’ @ 194’

Best efficiency 20/40 200’ @ 390’30/50 177’ @ 367’

PU M P SNoryl


WWW.BURCAM.COM

5, 7, 10, 25, 55, 85GPMGPM


shel l , suct ionshel l , suct ion& discharge.& discharge.

NorylNorylimpel lers &impel lers &

di f fusersdi f fusers



Electrical diagram

installation

3 wire G G

To pump

Fromdistribution

2 wire





Precision machined Noryl impellers and diffusers.

Polyethylene screen to prevent pump damagefrom abrasive material.




SUB-PACS CONTAIN:- Submersible pump - Control box (if required).- Splice kit. - LOP pressure switch.- Pressure gauge. - Bronze tank tee. - Submersible cable attached to motor lead







PU M P S


WWW.BURCAM.COM


5GPMGPM


lead

105130 13 1/2 115 2 48”

105125 13 1/2 115 3 48”

105132 13 1/2 230 2 48”

105127 13 1/2 230 3 48”

105191 13 1/2 230 2 200’

105101 13 1/2 230 3 200’

105142 18 3/4 230 2 48”

105135 18 3/4 230 3 48”

105195 18 3/4 230 2 250’

105105 18 3/4 230 3 250’

105144 22 1.0 230 2 48”

105145 22 1.0 230 3 48”

105153 30 1.5 230 2 48”

105154 30 1.5 230 3 48”

SUBSUB--PPACAC

SUBSUB--PPACAC

SUBSUB--PPACAC

1/2 HPPSI 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’ 325’0 520 500 480 460 440 420 400 360 320 280 200 75

20 494 474 454 434 414 390 358 326 286 213 9530 471 451 431 411 386 354 322 290 219 10540 448 428 408 381 349 317 285 226 11550 425 405 376 344 312 280 216 125 USGPH

3/4 HPPSI 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’ 325’ 350’ 400’0 470 460 450 435 420 400 370 340 310 270 240 200 135

20 446 431 414 393 369 345 315 276 245 206 173 14030 428 411 389 365 341 317 280 247 210 175 14340 408 386 362 338 314 283 250 213 178 14550 382 358 334 310 278 252 216 181 148 USGPH

1.0 HPPSI 160’ 180’ 200’ 225’ 250’ 275’ 300’ 325’ 350’ 400’ 450’ 500’ 550’0 450 435 420 405 385 365 345 320 295 250 200 140 75

20 416 404 388 368 348 324 299 276 254 204 14530 402 386 370 350 326 301 278 255 231 177 11540 383 367 351 328 303 280 257 233 208 15050 365 349 330 305 282 259 235 210 182 121 USGPH

1.5HPPSI 180’ 200’ 225’ 250’ 275’ 300’ 325’ 350’ 400’ 450’ 500’ 550’ 600’0 490 480 470 460 450 440 430 410 390 370 335 300 250

20 470 462 452 442 432 413 402 392 372 338 303 254 20930 460 452 442 432 415 402 392 382 357 322 281 233 18840 451 443 433 416 403 393 383 373 341 306 258 212 16750 442 434 418 404 394 384 374 360 325 285 237 USGPH

Best efficiency 20/40 126’ @ 191’30/50 103’ @ 168’

Best efficiency 20/40 153’ @ 201’30/50 130’ @ 178’

Best efficiency 20/40 326’ @ 509’30/50 303’ @ 486’

Best efficiency 20/40 171’ @ 307’30/50 148’ @ 284’

Performance charts

SUBSUB--PPACAC

PU M P SStainless Steel


WWW.BURCAM.COM


7GPMGPM1/2 HP

PSI 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’0 540 530 505 475 450 420 385 330 275 210 130

20 537 523 496 468 441 410 372 328 284 220 14330 519 492 464 437 404 365 321 277 226 14940 487 460 432 399 359 315 270 218 15650 456 428 394 352 308 262 210 146 USGPH

3/4 HPPSI 80’ 100’ 120’ 140’ 160’180’’200’ 225’ 250’275’ 300’ 325’ 350’0 580 570 560 550 530 515 500 470 430 390 350 275 180

20 557 544 526 511 493 468 436 396 356 287 195 136 8330 541 523 508 489 464 432 400 360 293 203 140 8840 521 506 486 459 427 395 363 299 210 144 9250 504 482 454 422 390 358 305 218 149 96 USGPH

1.5HPPSI 160’ 180’ 200’ 225’ 250’ 275 300’ 325’ 350’ 400’ 450’ 500’ 550’0 570 560 550 535 520 505 485 460 440 415 370 310 240

20 546 534 522 507 488 464 443 430 417 374 315 246 16630 533 521 509 490 466 445 431 418 398 347 283 210 12240 519 507 491 468 446 432 419 400 377 320 251 17350 505 489 470 448 433 420 402 379 352 289 216 USGPH

1.0 HPPSI 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’ 325’ 350’ 400’ 450’0 570 555 540 520 500 480 460 440 420 380 320 265 145

20 534 514 495 479 463 443 423 386 330 297 269 15530 511 493 477 461 445 425 390 334 299 272 21940 490 474 458 442 426 393 339 301 274 224 16450 472 456 440 424 396 344 304 276 229 169 USGPH


lead

105113 10 1/2 115 2 48”

105114 10 1/2 115 3 48”

105131 10 1/2 230 2 48”

105163 10 1/2 230 3 48”

105208 10 1/2 230 2 200’

105108 10 1/2 230 3 200’

105141 13 3/4 230 2 48”

105143 13 3/4 230 3 48”

105209 13 3/4 230 2 250’

105109 13 3/4 230 3 250’

105173 17 1.0 230 2 48”

105174 17 1.0 230 3 48”

105182 22 1.5 230 2 48”

105183 22 1.5 230 3 48”

SUBSUB--PPACAC

SUBSUB--PPACAC

SUBSUB--PPACAC

SUBSUB--PPACAC

Best efficiency 20/40 32’ @ 124’30/50 9’ @ 101’

Best efficiency 20/40 101’ @ 222’30/50 78’ @ 199’

Best efficiency 20/40 85’ @ 205’30/50 62’ @ 182’

Best efficiency 20/40 153’ @ 373’30/50 130’ @ 350’

PU M P S

Performance charts

Stainless Steel


WWW.BURCAM.COM


10GPMGPM1/2 HP

PSI 0’ 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’0 840 780 710 650 570 490 420 350 260 100

20 822 759 692 626 546 469 399 328 254 12630 749 683 614 534 459 389 318 234 10640 674 602 522 448 378 307 215 9250 590 510 438 368 296 196 80 USGPH

3/4 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’225’ 250’ 275’0 915 910 900 860 810 755 700 640 550 445 335

20 914 907 888 845 794 739 682 618 546 462 353 23830 906 882 838 785 730 673 608 533 449 361 24840 876 830 777 722 664 597 521 436 348 25750 823 769 714 655 586 508 423 335 243 USGPH

1.5HPPSI 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’ 325’ 350’ 400’ 450’ 500’0 930 900 860 820 780 730 690 645 590 530 460 360 23020 848 810 778 738 696 652 599 540 501 466 368 24030 806 772 732 700 656 603 544 503 468 422 31140 766 727 695 659 608 549 506 471 426 376 25150 722 690 654 612 554 509 474 430 380 321 USGPH

1.0 HPPSI 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’ 325’ 350’ 400’0 955 920 880 830 790 750 700 650 600 540 440 340 220

20 865 818 778 738 698 658 608 550 456 356 290 23030 812 772 732 692 652 612 554 464 364 294 23440 766 726 686 646 606 559 472 372 299 23950 720 680 640 600 552 480 380 304 244 USGPH


lead

105124 6 1/2 115 2 48”

105126 6 1/2 115 3 48”

105133 6 1/2 230 2 48”

105128 6 1/2 230 3 48”

105203 6 1/2 230 2 200’

105103 6 1/2 230 3 200’

105134 8 3/4 230 2 48”

105136 8 3/4 230 3 48”

105207 8 3/4 230 2 250’

105107 8 3/4 230 3 250’

105150 11 1.0 230 2 48”

105146 11 1.0 230 3 48”

105161 15 1.5 230 2 48”

105155 15 1.5 230 3 48”

Best efficiency 20/40 27’ @ 81’30/50 5’ @ 58’

Best efficiency 20/40 129’ @ 229’30/50 106’ @ 206’

Best efficiency 20/40 98’ @ 157’30/50 75’ @ 134’

Best efficiency 20/40 166’ @ 311’30/50 143’ @ 288’

SUBSUB--PPACAC

SUBSUB--PPACAC

SUBSUB--PPACAC

PU M P S

SUBSUB--PPACAC

Performance charts

Stainless Steel


WWW.BURCAM.COM


lead

105119 5 1/2 115 2 48”

105120 5 1/2 115 3 48”

105121 5 1/2 230 2 48”

105123 5 1/2 230 3 48”

105140 7 3/4 230 2 48”

105138 7 3/4 230 3 48”

105151 8 1.0 230 2 48”

105148 8 1.0 230 3 48”

105162 11 1.5 230 2 48”

105157 11 1.5 230 3 48”

105167 16 2.0 230 3 48”

105176 22 3.0 230 3 48”

3/4 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 19501850170015001200 900 520 40

20 180516401410 1110 786 37630 16101365 1065 729 30440 1320 1020 672 23250 975 615 160 USGPH

1/2 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 174015801360 990 540 60

20 15141249 855 39630 1194 788 32440 720 25250 180 USGPH

25GPMGPM


1.5 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 21002070198018001590143012601080 900 660 400

20 2043192617371542137912061026 842 65044230 1899170615181354 1179 999 814 618 41040 167414941328 1152 972 785 587 36850 14701303 1125 945 756 556 320 USGPH

2.0 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 21002050197018801780167015701460 13301150 960 760

20 20261943185017471640153714211287 1142 990 79257530 1930183517311625152114021265 1120 968 808 59340 182017141610150413821244 1097 944 784 61050 16981595148813631222 1074 920 760 584 USGPH

3.0 HPPSI 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’ 300’0 210020802060203019551870178517001620 14851350 12151080

20 205120081930184517601676158814801372 1237 1102 912 60330 199619171832174716641571146313551247 1112 928 629 40940 19041819173416521555144713391231 1123 944 656 424 23950 1806172116401539143113231215 1107 960 682 439 USGPH

1.0 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 204019301800162013501050 720 400 60

20 1891174615391260 951 624 29830 171914991215 902 576 24740 1458 1170 852 528 19650 1125 803 480 145 USGPH

PU M P SStainless Steel


WWW.BURCAM.COM


1.5 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 4675 4250 3700 3000 2100

20 4085 3490 2730 147030 3385 2595 115540 2460 84050 525 USGPH Technical Information

MODEL Stages HP Volts Wire Motorlead

105152 5 1.5 230 2 48”105158 5 1.5 230 3 48”

105169 5 2.0 230 3 48”

105177 7 3.0 230 3 48”

105186 11 5.0 230 3 48”


lead

105170 4 2.0 230 3 48”

105178 6 3.0 230 3 48”

105187 16 5.0 230 3 48”

55 GPMGPM

85 GPMGPM

55 GPM

2.0 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 4780 4450 4110 3620 3040 2500 1445

20 4348 3963 3446 2878 2260 119030 3890 3359 2797 2140 93540 3272 2716 2020 68050 2635 1900 425 USGPH

55 GPM

3.0 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 4800 4740 4490 4250 3950 3650 3300 2800 2300 1825

20 4665 4418 4160 3860 3545 3150 2650 2186 175230 4382 4115 3815 3493 3075 2575 2129 153340 4070 3770 3440 3000 2500 2072 131450 3725 3388 2925 2425 2015 1095 USGPH

55 GPM

5.0 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 4820 4800 4740 4700 4550 4410 4250 4050 3840 3620 3380 3110

20 4782 4728 4655 4508 4362 4190 3987 3787 3610 3418 3153 2715 189230 4722 4633 4487 4338 4160 3956 3761 3582 3390 3175 2753 196440 4610 4466 4314 4130 3924 3734 3553 3358 3142 2790 203550 4445 4290 4100 3893 3708 3524 3326 3110 2734 2106 USGPH

55 GPM

5.0 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 7150 7130 6950 6590 6160 5680 5200 4700 4200 3700 3120 2630 2000

20 6842 6461 6016 5536 5050 4550 4050 3561 3100 2708 210130 6397 5944 5464 4975 4475 3975 3491 3042 2650 215140 5872 5392 4900 4400 3900 3422 2983 2580 207650 5320 4825 4325 3825 3352 2924 2504 2000 USGPH

85 GPM

3.0 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 7150 6750 6050 5400 4580 3730 3000 2250

20 5855 5154 4325 3511 2775 157530 5031 4198 3402 2663 123840 4070 3292 2550 90050 3183 2438 563 USGPH

85 GPM

2.0 HPPSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 160’ 180’ 200’ 225’ 250’ 275’0 7000 6250 5050 3800 2600 1300

20 4675 3440 2210 91030 3260 2015 71540 1820 52050 325 USGPH

85 GPM

85GPMGPM

PU M P S

55GPMGPM

Cast Iron

14

WWW.BURCAM.COM

SUBMERSIBLEDEEP WELL

AccessoriesAccessoriesMotors &Control boxesWith ground motor connections.

Larger models and sizes available upon request.

Well capsCast and aluminiummodels available.

Well sealsCast iron.

Splice kits

Torque arrestorComplete with:two 2” stainless steel clamps for easier installation.

3 Wire Motors 2 Wire motors HP. Volt.Phase Control boxes

125225 1/3 115 1 125325125226 1/3 230 1 125326

125127 1/2 115 1125227 1/2 115 1 125327

125128 1/2 230 1125228 1/2 230 1 125328

125130 3/4 230 1125229 3/4 230 1 125329

125132 1.0 230 1125235 1.0 230 1 125335

125133 1.5 230 1125245 1.5 230 1 125345125255 2.0 230 1 125355125265 3.0 230 1 125365125275 5.0 230 1 125375125277 7.5 230 1 125377125278 7.5 230 1 125378125279 7.5 575 3 125379125282 10 230 3 125382125283 10 575 3 125383125285 15 230 3 125385125286 15 575 3 125386125290 20 575 3 125390125292 25 575 3 125392125294 30 575 3 125394125296 40 575 3 125396

Prod. # Diam. Well150156 6”

Prod. # Diam. Well150179 6” Sealed

Prod. # Well Pipe Material750927 4” 1” C . I .750928 4” 1¼” C . I .750929 6” 1” C . I .

Prod. # Well Pipe Material750930 6” 1¼” C . I .750931 5” 1” C . I .

Prod. # Material Qty. tubes Qty connector Fit size150152 Heat shrink 3 3 #14, #12, #10150143 Heat shrink 4 4 #14, #12, #10

Prod. # Casing Drop pipesize size

150158 4”-8” 1” to 1¼”

PU M P S

I N F O - P U M P S 1 8 0 0 3 6 1 - 1 8 2 0 W W W . B U R C A M . C O M


WWW.BURCAM.COM

PU M P S

Submersible cablewith ground

Tank TeesProd# Size Connection

Bronze 650651 1” NPT long 2 drain ports 1/2”2 accessories port 1/4” FNPT

Bronze 650652 1”NPT short 2 drain port 1/2”2 accessories ports 1/4” FNPT

Brass 650662 1” NPT long 2 drain port 1/2”2 accessories ports 1/4” FNPT

Bronze 650665 Tank T package

Miscellaneous Prod. Connection size

150181 1 1/4” NPT X 1” Barb

150153 1/8” Snifter valve150175 1/4” Snifter valve

150154 1/4” Poly rope

150162 1/2” Relief valve

650659 1/2” Boiler valve

150134 Pumptec QD

SUBMERSIBLEDEEP WELL

Prod. #Wire size150166 14-3150167 12-3150192 14-4150193 12-4

Prod. #Wire size150194 10-4150195 8-4150196 6-4

AccessoriesAccessories

Pitless adaptors150155 1” Bronze150176 1 ¼” Bronze150177 2” Bronze750850 1 ¼” X 1” Bronze double

Installation steps

Slide the gasket (2) on the pitless threaded pipe (5).Insert through the hole into the well pipe.Insert the gasket (1) and screw the bolt (3) through outside of pipe.Slide into part # 5.Slide the top fixed on the upward part of the pitless adaptor (6).Slide-in completely.

LOP pressure switchFactory preset for 20 - 40 or 30 - 50 operating pressure

Rated for 1 HP / 115V.or 1.5HP / 230V.

Available with barb, female and male connection.

Selection chart

model preset psi connection

150159S 20 / 40 1/4” Female150147S 30 / 50 1/4” Female

Shuts off the pump when water pressure is under 10 PSI. This situation may occur when the well is pumped down. This protects the pump from damage caused by a suction break.


WWW.BURCAM.COM

PU M P SSUBMERSIBLE

DEEP WELLAccessoriesAccessories

2

1

5

6

3

4

1

2

Adjustment or modification of start/stop setting of pressure switch haveto be done carefully. Turn adjustment nut 1 half turn at a time.

Turn nut 1 clockwise to raise start and stop pressure setting. Never turnnut 2. This will change the 20 PSI range between start and stop pressureand may damage your tank’s bladder or modify the efficiency of yourwater system. Check system operation after each adjustment.


WWW.BURCAM.COM

PU M P S

300308P1/12HPHP

GENERALUTILITY

Designed for a maximum lift of 40’(12m), for emergency use.

300502300503

1/4HPHP

Designed for a portable application and a maximum lift of 20’ (6.0m) for domestic use, homes and cottages.

25’25’7.57.5

20’20’6.06.0

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD LPH

200 760

525 1990

1000 3785

1270 4880

1525 5770

40’40’1212

20’20’6.06.0

5’5’1.51.5

USGPH HEAD LPH

300 1125

320 1210

350 13353 0 0 3 0 8 P 1 / 1 2 H P

3 0 0 5 0 3 - 3 0 0 5 0 2 1 / 4 H P

FRICTION LOSS IN PIPE NOT INCLUDED


ELECTRELECTRONICONICAAUTUTOMAOMATICTICOPERAOPERATIONTION

1/12 HP 115V 60Hz motor, brush type.

Corrosion resistant pump body, easy to prime.

3/4” garden hose, suction and discharge.

Accessories included: Garden hose and puddle scoop.

9’ grounded power cord.

Capacity up to 450 US GPH.

This utility pump is designed to:- Empty water beds. - Empty washing machines.- Remove water from pool covers.- For dewatering around homes, farms and

to empty stock tanks and transfer water.

Water cooled continuous or automatic duty.1/4 HP 115V 60 Hz with thermal overload protection.

Pump body made of non-corrosive Noryl material.

1” NPT discharge garden hose adaptor.

Bottom suction to 1/8” depth.

15’ cable grounded power cord.

Capacity up to 1525 US GPH. 300503 Automatic

300502 Manual

MANUMANUALALOPERAOPERATIONTION


WWW.BURCAM.COM

PU M P SGENERAL

UTILITY

1/4HPHP

25’25’7.57.5

20’20’6.06.0

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD L P H

1800 6815

2150 8140

2750 10400

3000 11350

4000 15140

Designed for a portable application and a maximum lift of 15’ (4.5m) for domestic use, homes and cottages.

Water cooled continuous duty motor 1/4 HP 115V 60 Hz with automatic thermal overload protection.

Pump body made of non-corrosive Noryl material.

1” NPT discharge garden hose adaptor, also included 3/4”and 1/2” barb.

Bottom suction to 1/8” depth.

9’ cable grounded power cord.

For dewatering around homes.


Designed for a maximum lift of 25’ (7.5m) to empty pool.

Water cooled continuous duty motor 1/2 HP, 115V 60Hz, with thermal and overload protection.

Made of non-corrosive Noryl.

1 1/2” discharge.

Recommended to empty pools and can also be used where volume and/or flow are extensive.


3 0 0 5 0 9 P 1 / 2 H P

COMPLETE WITH:- 1 1/2” check valve.- 50’ discharge hose.- 1/4” X 12’ poly rope.FRICTION LOSS IN PIPE NOT INCLUDED

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD L P H

800 3000

1000 3750

1200 4550

3 0 0 5 0 7 P 1 / 4 H PFRICTION LOSS IN PIPE NOT INCLUDED

300507P

300509P1/2HPHP

WWW.BURCAM.COM

PU M P S

7008096.5HP HP

GAS DRIVENUTILITY

100’100’30.530.5

90’90’27.527.5

80’80’24.024.0

70’70’21.021.0

60’60’18.018.0

USGPH HEAD LPH

1140 4300

1350 5100

1565 5900

1720 6500

1875 7100

7 0 0 8 0 8 1 . 5 H P


NO YESNO NO

80’80’24.524.5

60’60’18.018.0

40’40’12.012.0

20’20’6.06.0

USGPH HEAD LPH

2000 7500

5700 21500

7200 27250

8400 31800

7 0 0 8 0 9 5 . 5 H PFRICTION LOSS IN PIPE NOT INCLUDED

Designed for a maximum vertical suction lift of 12’ (3.65m) and a maximum vertical head of 100’ (30.5m).

33CC cylinder.

2 stroke engine.

Aluminium non-corrosive cast body for strength and durability.

Stainless steel mechanical seal.

Integrated handle for easy portability.

1” suction and discharge.

Adaptors and strainer included.

Built-in check valve in suction.

Easy to prime body with open trash type impellerfor better efficiency.

Electronic ignition.

0.15 GAL (0,7L) tank capacity.

(25:1) gas-oil mixture.

Economic fuel consumption of 0.11 GPH.

Lightweight and portable 10.3 Lbs (4,7 KG).

APPLICATIONS

SUMP DRAINAGE

LIVESTOCK WATERING

FORESTRY USE (FISHING AND HUNTING)

SWIMMING POOLMAINTENANCE

FILLING TANKS

IRRIGATION

4 stroke engine.

Aluminium non corrosive motor and pump casing.


Protective frame and support for easy portability.


Easy to prime body with open trash type impeller for better efficiency.

Electronic ignition.19

7008081.5HP HP

I N F O - P U M P S 1 8 0 0 3 6 1 - 1 8 2 0 W W W . B U R C A M . C O M


WWW.BURCAM.COM

PU M P SCONDENSATE

UTILITY

310100

1.45AMPAMP

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

1’1’0.30.3

USGPH HEAD LPH

45 170

70 265

85 320

95 360

3 1 0 1 0 0 1 . 4 5 A M P


40’40’12.012.0

35’35’10.510.5

30’30’9.09.0

20’20’6.06.0

10’10’3.03.0

5’5’1.51.5

USGPH HEAD LPH

100 375

130 500

155 585

185 700

195 740

200 760

700725 with 1/4” drill at 2000 RPMFRICTION LOSS IN PIPE NOT INCLUDED

CONDENSATE PUMPDesigned to remove water or collect condensation from energy efficient cooling system.

ABS construction.

Overflow safety switch.

Thermally protected.

Translucent base.

1/4” barb discharge with check valve.

Ideal to pump liquid up to 185o F.

Capacity 2 Quarts.

DRILL PUMP

Functions with any make of electrical drill (use 1/4” electric drill for optimum performance).May be used for many pumping and draining uses: aquariums, waterbeds, washing machines, etc.

Easy to prime pump to 6 feet (2m).

Made from high-strength thermoplastic.

Auto lubricated shaft.

Simply insert into any electrical drill.

Capacity up to 220 US GPH (755 LPH)

¼”shaftshaft

700725

Heat Pump

Air Conditioner

As the handle is pushed down causing the plunger to rise, water is discharged throughthe pump spout. The vacuum that develops in the cylinder below the plunger is filledwith water from the suction pipe which connects the pump to the water source.

As the pump handle is raised, the plunger lowers, this causes the check valve to seatand trap water in the cylinder. The trap forces the plunger valve open allowing water to enter the cylinder area on the upper side of the plunger.


WWW.BURCAM.COM

PU M P S

3”

GENERALUTILITY

Checkvalve

Plunger

700761

4FeetFeet700760

6FeetFeet700758

8FeetFeet700759

10FeetFeet

Waterup

Waterdown

NONFREEZE YARD HYDRANTSIdeal for livestock watering year round.

CISTERN PUMP

Designed for shallow well application depths to 25’ (7.6m).

Open spout design, made from heavy cast iron.

Suction tapping for 1 1/4” drop pipe.

Self drainage with handle, in “UP” position to prevent freezing.

Moveable cap may be adjusted for wide range of handle positions.

Ideal for campsites, parks, summer homes, residences, farms, cottages, picnic areas, fishing and hunting camps, and for decorative use as a lawn or patio ornament.

700751

1. Select a yard hydrant with a bury depth 1 foot below the maximum frost level.

2. Dig a 2 foot trench, 2 feet deeper than the bury depth.

3. Set the yard hydrant on a firm base, such as concrete or cement block.

4. Connect to your water line.

5. Place 2 cubic feet of coarse gravel around the yard hydrant. Backfill remainder of the hole.

Suction pipe


WWW.BURCAM.COM

PU M P SGENERAL

UTILITY

GEAR PUMPS HIGH PERFORMANCEHigher volume. Higher pressure.

Brass pump body.

Stainless steel shaft.

Stainless steel gears.

1/2”, 3/4” and 1” NPT suction and discharge.

0 PSI 25 PSI 50 PSI 75 PSI 100 PSIRPM HP US GPH HP US GPH HP US GPH HP US GPH HP US GPH1800 1/3 600 1/3 580 1/2 480 3/4 420 1.0 3301200 1/3 360 1/3 330 1/2 300 3/4 275 3/4 215900 1/3 300 1/3 280 1/3 240 1/2 210 3/4 160

1800 1/3 840 1/2 720 3/4 660 1.0 630 1.5 6001200 1/3 540 1/3 500 1/2 480 3/4 440 1.0 400900 1/3 420 1/3 375 1/3 360 1/2 330 3/4 300

1800 1/2 960 1.0 870 1.0 780 1.5 720 2.0 6301200 1/2 720 3/4 580 3/4 520 1.0 480 1.5 430900 1/3 480 1/2 435 1/2 390 3/4 360 1.0 320

7007213/4IInchnch

7007221IInchnch

700720

½

¾

1

GUZZLER PUMP

Designed as utility pump and jet pump primer.

Hand pump with diaphragm.

Constructed of Delrin with aluminium handle.

Self priming.

High capacity.

Lightweight.

12 ft suction.

Will not rust.

Versatile and economic pump.

Perfect for a variety of demanding applications.

Additional accessories available.

Pump up to 15Ft.

3/4” NPT ID, 1” NPT OD.

8GPMGPM700710

IDEAL FORIDEAL FORTRANSFERTRANSFER

OFOFLIQUIDSLIQUIDS

1/2IInchnch


WWW.BURCAM.COM

PU M P S

Sump Buddy

EMERGENCYBACK-UP

BACK UP SUMP PUMP PROTECTIONA must for every home owner with municipalwater and a need for a conventional typesump pump.

Works from municipal water pressure.

Easy to install.

Non corrosive.

Maximum lift of 15’ (4.5m).

Reliable and safe.

SUMP BUDDY is easily connected to the municipal water supply line and to your existing conventional sump pump discharge line. In the event of flooding during a power outage, the rising water, in the sump, will activate an automatic control valve which will start the system.

IT'S WATER PUMPING WATERNO ELECTRICITY

REQUIREDNO BATTERY

REQUIRED

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD L P H

158 600

317 1200

581 2200

300402 at 60 PSI

Activates during power outage or pump failureDesigned for a permanent auxilliary application for submersible sump pump or column sump pump.

To evacuate water during power outage, primary pump failure or when volume is too high for primary pump to handle.

24 hours fast recharge.

Included with system:

- Charger battery case.

- Mechanical float switch.

- Check valve.

Performance charts.

- 7 HRS to 5’ (1.5m )

- 9 HRS to 10’ (3.0m )

- 10 HRS to 15’ (4.5m )

12VoltVolt

AUTOMATICOPERATION


15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD L P H

1020 3850

1200 4550

1400 5300

3 0 0 4 0 3FRICTION LOSS IN PIPE NOT INCLUDED

300403

300402

Water under pressure will flowthrough the SUMP BUDDY whichcreates a vacuum and causes thewater in the sump to be drawn out

into the discharge line.


WWW.BURCAM.COM

PU M P SSUBMERSIBLE

EFFLUENT

300620300622300750

1/2HPHPMulti-purpose effluent pump will fill the need in most sump applications.

To pump effluent as a permanent installation pump.

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD L P H

360 1350

1900 7200

3300 12500

3 0 0 6 2 0 - 2 2 1 / 2 H PFRICTION LOSS IN PIPE NOT INCLUDED

300622 1/2HP

300620 1/2HP

Designed for a maximum lift of (4.5m) 15’,for domestic use, homes, cottages and farms.

1/2 HP 115V 60Hz motor, water cooled, with automatic thermal and overload protection.

Brass non-clog type impeller. Will not corrode, maintains pumping performance, year after year.

Pump body made of specially treated and rugged cast iron,1 1/2” suction and discharge, 3/4” solid handling capabilities.

Corrosion resistant construction.

Standard stainless steel, mechanical rotary seal.

Mechanical type switch, 15A, tested up to 1 million cycles.

Vertical switch 15A 60Hz. Ideal for restricted sump pits.

20’ cord piggyback type.

Carrying handle.

Capacity up to 3300 USGPH.

CONTRACTORS SERIES

Designed for a permanent installation anda maximum lift of 29’ (8.9 m)

Stainless steel mechanical rotary seal

2” NPT discharge

Oil filled motor

20’ cord piggyback type


300750 1/2HP29’29’8.98.9

25’25’7.57.5

20’20’6.06.0

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD LPH

400 1500

2400 9100

4375 16600

6100 23100

7000 26500

7200 27300

3 0 0 7 5 0 1 / 2 H PFRICTION LOSS IN PIPE NOT INCLUDED

300508P 1/4HP300600P 1/3HP300700P 1/2HP


WWW.BURCAM.COM

PU M P S

300508P300601

1/4HPHP300600P

300610

1/3HPHP300700P

300710

1/2HPHP

SUBMERSIBLESUMP

Designed for a permanent installation and a maximum lift of 18’ (5.5m) to 22’(6.7m) for domestic use, homes, cottages and farms.

Water cooled continuous duty motor with thermal and overload protection

Pump body made of non-corrosive Noryl material

1 1/2”discharge, with 1 1/4” reducer.

Automatic mechanical switch, independent and adjustable or vertical float switch, ideal for restricted sump pits.

Noryl impeller (non-corrosive).

9’ grounded power cable.

Capacity from 2500 US GPH up to 3200 US GPH.

18’18’5.55.5

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD LPH

550 2080

1550 5875

2100 7950

2500 9465

3 0 0 5 0 8 P 3 0 0 6 0 1 1 / 4 H P

18’18’5.55.5

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD LPH

1450 5500

2000 7800

2500 9500

3000 11350

3 0 0 6 0 0 P 3 0 0 6 1 0 1 / 3 H P

22’22’6.76.7

20’20’6.06.0

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD LPH

1000 3775

1600 6050

2300 8700

2850 10800

3200 12100

3 0 0 7 0 0 P 3 0 0 7 1 0 1 / 2 H PFRICTION LOSS IN PIPE NOT INCLUDEDFRICTION LOSS IN PIPE NOT INCLUDEDFRICTION LOSS IN PIPE NOT INCLUDED

300601 1/4HP300610 1/3HP300710 1/2HP

300628 1/3HP300718 1/2HP


WWW.BURCAM.COM

PU M P SSUBMERSIBLE

SUMP

300718300728

1/2HPHP300618300628

1/3HPHP

Designed for a permanent installation and a maximum lift of 20’ (6.0m) to 25’ (7.5m) for light commercial, residential and farm use.

Oil cooled continuous duty motor 115V 60Hz with thermal overload protection.

Pump body made of specially treated and rugged cast iron.

1 1/2” discharge, with 1 1/4” reducer included.

Mechanical switch type, automatic, independant and adjustable. 15A 60Hz. or vertical float switch, ideal for restricted sump pits.

9’ cable grounded cord.

Stainless steel bottom suction plate.


25’25’7.57.5

20’20’6.06.0

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD LPH

475 1800

1500 5700

2300 8600

2700 10200

3000 11100

3 0 0 7 1 8 3 0 0 7 2 8 1 / 2 H PFRICTION LOSS IN PIPE NOT INCLUDED

20’20’6.06.0

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD LPH

250 1000

1600 6000

2100 8000

2600 9800

3 0 0 6 1 8 3 0 0 6 2 8 1 / 3 H PFRICTION LOSS IN PIPE NOT INCLUDED

300618 1/3HP300728 1/2HP


WWW.BURCAM.COM

PU M P S

300505300510

1/2HPHP

SUBMERSIBLESUMP

25’25’7.57.5

20’20’6.06.0

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD LPH

1000 3800

1650 6250

2150 8125

2600 9850

3000 11350


Designed for a permanent installation anda maximum lift of 25’ (7.5m) for light commercial and residential use.Great for water transfer from flooded areas.

Oil cooled continuous duty motor 15A 60Hz, with automatic thermal and overload protection.

Cast iron and stainless steel construction.

1 1/2” NPT discharge, with 1 1/4” reducer.

Automatic mechanical switch, independent and adjustable.

Cast iron impeller.

9’ grounded electric cable.


Designed for a permanent installation and maximum lift of 15’ (4.5m) for light commercial, residential and farm use.Great for water transfer from flooded areas.

Oil cooled continuous duty motor 115V 60Hz, with automatic thermal and overload protection.

Made of non-corrosive material pump body.

1 1/4” NPT discharge adaptor.

Stainless steel mechanical rotary seal.

9’ grounded cable, piggyback cord.


15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD L P H

1100 4165

2100 7950

3000 113503 0 0 5 1 0 1 / 3 H P

FRICTION LOSS IN PIPE NOT INCLUDED 300510 1/2HP

300505 1/2HP


WWW.BURCAM.COM

PU M P SSUBMERSIBLE

SUMP

300608300800

1/3HPHP Designed for a permanent installation and a maximum lift of 20’ (6.0m) for residential use.

Oil cooled continuous duty motor 15A 60Hz, with thermal and overload protection.

Cast iron construction.

1 1/2” NPT discharge.

Adjustable automatic mechanical switch.

Noryl impeller.



Designed for a permanent installation and a maximum lift of 22’ (6.7m) for residential use.

Oil cooled continuous duty motor 15A 60Hz, with thermal and overload protection.

Polypropylene pump body.


Ideal for restricted sump pits.

Automatic diaphragm switch.

Nylon impeller + 30% GF.



20’20’6.06.0

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD LPH

300 1100

900 3400

1600 6000

2400 9000


300608 1/3HP

300800 1/3HP

22’22’6,76,7

20’20’6.06.0

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD LPH

320 1210

1020 3860

1590 6020

2110 7990

2400 9085



WWW.BURCAM.COM

10’/900 450478

Universal type with piggyback, 115V, 15 A.

Suitable for all make of submersible pumps.

Selection chart.

model angle of cordaction length

450453 900 10’450467 900 15’450468 900 20’

450461 300 10’

450462 900 10’Reverse action

300

900

900

Mechanical type switch, 15A,tested up to 1 million cycles.

10’/900 45045315’/900 45046720’/900 45046810’/300 450461

rev 10’/900 450462

115vvoollttssAvai lab le on Ava i lab le on automatic automatic

300 & 400 pump series 300 & 400 pump series

Ava i lab le on most Ava i lab le on most 300 & 400 pump ser ies !!!300 & 400 pump ser ies !!!

Vertical type switch, 15A,tested up to 1 million cycles.Ideal for restricted sump pits.Fix the switch to the discharge line (450446) or on the pump (450447) using the enclosedclamp or screws.

The clamp should be mounted approximately 17” above the base of the pump.

The minimum and maximum water level adjustments are pre-adjusted at the factory.

You may change the adjustment by raising or lowering the position of the metal stoppers.

115vvoollttss

Permanentfactory setting

450446

SUBMERSIBLESUMP & SEWAGE

Adjustmentstopper to

turn off the pump.

No adjustmentrequired

230vvoollttss

PU M P S


WWW.BURCAM.COM

PU M P SCOLUMN

SUMP

These domestic sump pumps are suitable for applications where the total vertical distance (head) does not exceed 15’ (4.5m).Designed for residential homes. Maximum water temperature 125°F / 52°C.Designed as an economic and efficient means of protecting homes against water damage through seepage, where there is no natural draining.

115V 60Hz motor.

Thermal and overload motor protection.

Bearing to bearing motor.

Corrosion-resistant vinyl column and drive shaft.

Stainless steel motor shaft and sintered bronze bearing.

Free floating drive coupling reduces motor bearing wear.

Top intake reduces chances of clogging.

Polypropylene corrosion-resistant base.


9’ grounded power cord.

Capacity up to 3000 US GPH

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD L P H

1500 5600

2400 9000

3000 11300


15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD L P H

1600 6100

2500 9500

3000 11300


Cast iron base

300530300381

1/3HPHP

300381 1/3HP

300530 1/3HP


WWW.BURCAM.COM

PU M P S


SUBMERSIBLESUMP & SEWAGE

MODEL 350354

1 1/4” X 20’ sump pump drain hose kit.

Adaptor and clamps included.

MODEL 350375

1 1/2” X 24’ sump pump drain hose kit.

Adaptor and clamps included.

MODEL 350445

Top mounting top switch.

Specially designed for our Column sump pumps (300530,300535).

MODEL 350353

Fits 1 1/4”- 1 1/2” discharge sump pumps.

Designed with 1 1/4” drain kit barb fitting and 1 1/2” ABS pipe fitting.

MODEL 350363

Fits 1 1/2”- 2” discharge sump pumps.

Designed with 1 1/2” drain kit barb fittingand 2” ABS pipe fitting.

MODEL 350362

Union sump pump check valve to connect 1 1/4” to 1 1/2” discharge pipe.

MODEL 450457

Union sewage check valve to connect 2” discharge pipe.

350353

350445

450457

350363

350354

350362


WWW.BURCAM.COM

PU M P SLAUNDRY TUB

Designed for a maximum lift of 10’ (3.0m)to handle normal waste water from domestic washing machines, bar sinks andall waste water not containing solids.Designed for a permanent installation.To be installed directly under tub strainer.Takes no floor space.

115V 60Hz motor. Body pump Noryl, corrosion resistant.

Automatic switch starts motor when water enters in the pump body.

Mounts directly to tail piece of laundry tub.

Fits under wet bars, kitchenettes, vanities and utility sinks. Complete self-contained unit.

Thermal and overload protection.

Allows sink installation without breaking concrete.

No trap or inlet piping required.

No vent connection required.

Maximum water temperature 1400 F (600C).


10’10’3.03.0

8’8’2.42.4

6’6’1.81.8

4’4’1.21.2

2’2’0.60.6

USGPH HEAD LPH

500 1900

800 3000

1020 3850

1200 4550

1400 5300

3 0 0 3 1 5 W 3 0 0 5 1 4 W 1 / 3 H PFRICTION LOSS IN PIPE NOT INCLUDED

300316HH Automatic kit

300315W 1/3HPManual operation

300514W300315W

1/3HPHP300514W 1/3HP

Automatic operation


WWW.BURCAM.COM

PU M P S

4005054/10HPHP

SUBMERSIBLESEWAGE

These pumps are designed for permanent installation and a maximum lift of 15’ (4.5m) for homes and cottages, and are also suitable for raw sewage applications where the total head requirements do not exceed 15 feet.

To be used in basements, washrooms and laundry tubs.

115V 60 Hz. motor oil filled with automatic thermal and overload protection.

Vortex impeller, clog-free type, made from Noryl, will not corrode, maintains pumping performance, year after year.

Pump body made from rugged cast iron,2” suction and discharge.

Standard stainless steel mechanical rotary seal.

Mechanical switch type 15Atested for 1 million cycles.

SJTW, 9’ cord, piggyback cord type.


15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD L P H

720 2725

3120 11800

4500 17000


15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD L P H

1260 4775

3060 11600

3600 13600

4 0 0 5 0 5 4 / 1 0 H PFRICTION LOSS IN PIPE NOT INCLUDED

1/2HPHP400500400510

400510 1/2HP


WWW.BURCAM.COM

PU M P SSUBMERSIBLE

SEWAGE

2.0HPHP400406T

230V

1.0HPHP3/4HPHP400401T

115V

1/2HPHP400405T

115V400409T

230V

400405T 3/4HP400406T 1.0HP400409T 2.0HP

35’35’10.510.525’25’7.57.520’20’6.06.015’15’4.54.510’10’3.03.05’5’1.51.5

USGPH HEAD LPH

400 1515

2100 7950

3000 11350

3900 14765

4800 18170

5700 21575

4 0 0 4 0 6 T 1 . 0 H PFRICTION LOSS IN PIPE NOT INCLUDED

40’40’12.012.030’30’9.09.025’25’7.57.520’20’6.06.015’15’4.54.510’10’3.03.05’5’1.51.5

USGPH HEAD LPH

1800 6825

4200 15900

5400 20050

6600 25000

7800 29525

9000 34070

10200 38610


25’25’7.57.520’20’6.06.015’15’4.54.510’10’3.03.05’5’1.51.5

USGPH HEAD LPH

600 2275

1500 5775

2400 9100

3300 12500

4200 15900

4 0 0 4 0 5 T 3 / 4 H PFRICTION LOSS IN PIPE NOT INCLUDED

25’25’7.57.520’20’6.06.015’15’4.54.510’10’3.03.05’5’1.51.5

USGPH HEAD LPH

600 2275

2200 8325

3000 11350

3900 14765

4900 18550

FRICTION LOSS IN PIPE NOT INCLUDED4 0 0 4 0 1 T 1 / 2 H P

HEAHEAVYVY DUTYDUTY SEWSEWAGE PUMPSAGE PUMPS

Designed for a permanent installation and a liftof 25’ (7.5m) to a maximum of 40’ (12.0m) forcommercial, residential use, homes and cottages.These submersible sewage pumps are designedand suitable for raw sewage applications wherethe total head requirements do not exceed 40feet.

115V and 230V 60Hz motor with automatic thermal overload protection.

Pump body made of stainless steel and cast iron complete with carrying handle.

Vortex impeller, clog-free type, made from cast iron.

2” suction and discharge pipe. Solid sewage handling capabilities.

Bottom base suction with cast iron grip plate.

Independent mechanical switch type. (Some models need specific switch, sold separately).

SJTW cord piggyback type.


400401T 1/2HP


WWW.BURCAM.COM

KI T S

400419T4/10HPHP

400420 400430400411T

1/2HPHP

SEWAGETANK

Designed for a permanent installation and a maximum lift of 25’ (7.5m) for residential use, homes and cottages.

Non corrosive fiberglass cover.

18” x 30” polyethylene heavy duty basin.

3” and 2” adaptor “Aquaflex” gasket for discharge pipe. Can be installed with 2” or 3” pipe.

3” side vent to facilitate cover dismantling to service the pump.

“Aquaflex” gasket for a perfect seal of the power cables.

4” “Aquaflex” gasket for sewage line.

2” sewage check valve included.

PUMP FEATURES:

- 400419T: 4/10 HP, 115V 60 Hz. motor oil filled with automatic thermal and overload protection.Capacity up to 3600 US GPH. Pump # 400505

- 400411T: 1/2HP 115V 60 Hz. motor oil filled with automatic thermal and overload protection.Capacity up to 4900 US GPH. Pump # 400401T

- 400420: 1/2HP 115V 60 Hz. motor oil filled with automatic thermal and overload protection.Mechanical or vertical switch.Capacity up to 4500 US GPH. Pump # 400500

- 400430: Same as 400420 pre-assembled. Pump # 400500

400411T 1/2HPNot assembled

450448 Basin 18” X 30”

400420 1/2HPNot assembled400430 1/2HPPre-assembled

400419T 4/10HPPre-assembled


WWW.BURCAM.COM

PU M P SSUBMERSIBLE

SEWAGE

400417T230V

1.0HPHP400416T

115V

3/4HPHP

25’25’7.57.5

20’20’6.06.0

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD LPH

600 2275

1500 5700

2400 10100

3300 12500

4200 15900

4 0 0 4 1 6 T 3 / 4 H PFRICTION LOSS IN PIPE NOT INCLUDED

35’35’10.510.5

30’30’9.09.0

25’25’7.57.5

20’20’6.06.0

15’15’4.54.5

5’5’1.51.5

USGPH HEAD LPH

400 1500

1100 4175

2100 7950

3000 11350

3900 14765

5700 21575


GRINDER SEWAGE PUMPS

Designed for a maximum lift of 35’ (10.5m)for homes, cottages, farms and commercial applications. These submersible sewage pumps are designed and suitable for raw sewage applications where the total head requirements do not exceed 35 feet.

115V or 230V 60Hz motor with automatic thermal overload protection, oil filled base.

Stainless steel and cast iron construction, complete with carrying handle.

Grinder designed impeller made from cast iron.

2” suction and discharge pipe. Solid sewage handling capabilities.

Bottom suction base with cast iron grip plate.

SJTW 15’ cord, piggyback type.

Mechanical switch not included.

Capacity from 1400 US GPH, up to 5700 US GPH.450447G Impeller


WWW.BURCAM.COM

PU M P S

4005501/2HPHP

SUBMERSIBLESEWAGE

C O N T R A C TO R S E R I E S

LIFETIME WARRANTY SEWAGE PUMP

Designed for a permanent installation for residential use, homes and cottages.

This submersible sewage pump is designedand suitable for raw sewage applications where the total head requirement does not exceed 22 feet.

115V motor oil filled with automatic thermal and overload protection.

Heavy duty motor for maximum reliability.Rugged cast iron motor housing.

Noryl impeller, clog-free type.

Stainless steel mechanical rotary seal.

2” suction and discharge.

Pump body made from rugged cast iron.

Mechanical switch type, 15 A tested for 1 million cycles.

SJTW, 20’ piggyback cord type.


22’22’6.76.7

20’20’6.06.0

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD LPH

400 1500

1500 5700

5000 18900

5800 22000

6700 25300



WWW.BURCAM.COM

ASYFLUSH

SUBMERSIBLESEWAGE E

4504751/2HPHP

15’15’4.54.5

10’10’3.03.0

5’5’1.51.5

USGPH HEAD L P H

720 2725

3120 11800

4500 17000

4 0 0 5 0 0 E 1 / 2 H PFRICTION LOSS IN PIPE NOT INCLUDED

PRACTICAL INFORMATIONS

Weight . . . . . . . . . .8o Lbs, 36 KgWidth . . . . . . . . . . . . . . . .24 1/2”Length . . . . . . . . . . . . . . .40 1/4”Height . . . . . . . . . . . . . . .20 3/4”Base Height . . . . . . . . . . .5 1/2”

EASY FLUSH SYSTEM

Designed to build up a complete washroom. No need to destroy walls and concrete floors.

CAN BE INSTALLED ALMOST ANYWHERE. . .

Accommodates vanity, shower, bath and humidifier.

Can be installed free standing on any level surface and all piping and basin can be hidden behind a wall and under the floor (2X6).

Perfect for basements, family rooms, additions, warehouses, factories and garages.

Reduces construction cost.

COMES COMPLETE WITH ALL PARTS. . .

Polyethylene basin and lid.

2” solid sewage pump 1/2HP.

2” check valve.

2” discharge plastic pipe and adaptor.

Floor flange and wax seal.

Aquaflex 2” pump discharge gasket.

Aquaflex 2” additionnal fixtures gasket.

Aquaflex 3” vent gasket.

Aquaflex 2 wire seal.

Hardware and step by step instructions.

Easy to install.

Quiet and efficient.

To be used with any conventional toilet cabinets.

No chemical product required.

2” solid handling.

Clogfree vortex impeller.

Basin made of polyethylene.

TYPICAL

HIDDEN

SOLUTION


WWW.BURCAM.COM

PU M P S

1/2 HP SUCTION CAPACITYPSI 0’ 5’ 10’ 15’ 20’ 25’0 820 787 697 631 549 492

20 780 749 663 601 523 46830 740 710 629 570 496 44440 535 514 455 412 358 32150 310 298 264 239 208 186 USGPH

506121S506132S506120S

1/2HPHP506221S506232S506220S

3/4HPHP

SHALLOW WELLCAST IRON JET


20 860 826 714 645 568 49930 825 792 685 619 545 47940 595 571 494 446 393 34550 345 331 286 259 228 200 USGPH

Shallow well pumps designed for water levels up to 25 feet.Recommended for home, cottage and farm applications.

TEFC motor 115/230V 60Hz. Totally enclosed,with thermal and overload protection.

Cast iron pump body.

Self priming due to design and large pump body.

Continuous duty capacitor, to eliminate starting wear.


Long life and high performance Noryl impeller.

Built-in ejector.

Maximum pressure of 65 PSI (1/2HP) and 70 PSI (3/4HP).

Capacities up to 715 US GPH (1/2HP) and 800 US GPH (3/4HP).

5’5’1.51.5

10’10’3.03.0

15’15’4.54.5

20’20’6.06.0

25’25’7.57.5

USGPH HEAD LPH

710 2687

629 2381

570 2157

496 1877

444 1680

506 CI Series 1/2 HP at 30 psiFRICTION LOSS IN PIPE NOT INCLUDED

5’5’1.51.5

10’10’3.03.0

15’15’4.54.5

20’20’6.06.0

25’25’7.57.5

USGPH HEAD LPH

792 2998

685 2592

619 2343

545 2063

479 1813

506 CI Series 3/4 HP at 30 psiFRICTION LOSS IN PIPE NOT INCLUDED


WWW.BURCAM.COM

PSHALLOW WELLCAST IRON JET

3/4HPHP 1/2HPHP

With CAPTIVE AIR TANK

Designed for water systems equipped with a jet pump.

No water-air contact, rust-free operation. No water-tank contact, eliminates seeping. No waterlogging, eliminates the need for air volume controls.

SPRINKLER version

Designed for a maximum vertical lift of 25’ (7.5m) for the following water sources: sand point, lake or river.

Designed for intermediate or continuous operation.1’’ garden hose adaptor included.Strong and practical transportation handle.

With FLUOMAC

Electronic system. No need for a conventional type tank. Compact, portable, easy to use and store in wintertime.

No maintenance.Fully electronic. Maintains a constant pressure.No need for a pressure switch.Protects the pump from running dry.Not recommended for sand point applications.

The main feature of the Fluomac System is its ability to regulate and control the delivery of water and to maintain a constant pressure without the inconvenience of fluctuating pressure, which is especially useful when taking a shower along with manyother applications.

506120S 1/2HP506220S 3/4HP

C/W 1/2HP506127S wt ML25H 25 Litre506128S wt ML60H 60 Litre506131S wt ML80H 80 Litre

3/4HP506228S wt ML60H 60 Litre506231S wt ML80H 80 Litre

506132S 1/2HP506232S 3/4HP

CastCastIronIron

ACKAGES


WWW.BURCAM.COM

PU M P S



20 861 827 697 594 517 43930 825 792 668 569 495 42140 595 571 482 411 357 30350 350 336 284 242 210 179 USGPH


20 945 917 765 652 567 48230 925 897 749 638 555 47240 655 635 531 452 393 33450 370 359 300 255 222 189 USGPH

3/4HPHP506521SS506132SS506520SS

115V

506518SS506530SS115/230V

506532SS115V

1/2HPHP

5’5’1.51.5

10’10’3.03.0

15’15’4.54.5

20’20’6.06.0

25’25’7.57.5

USGPH HEAD LPH

792 2998

688 2528

569 2153

495 1873

421 1593

506 SS Series 1/2 HP at 30 psiFRICTION LOSS IN PIPE NOT INCLUDED

5’5’1.51.5

10’10’3.03.0

15’15’4.54.5

20’20’6.06.0

25’25’7.57.5

USGPH HEAD LPH

897 3395

749 2835

638 2415

555 2100

472 1786

506 SS Series 3/4 HP at 30 psiFRICTION LOSS IN PIPE NOT INCLUDED

SHALLOW WELLS. S. JET

Designed for a shallow well application for a maximum vertical lift of 25 feet (7.5m).Recommended for home, cottage and farm applications.

TEFC motor 60Hz. Totally enclosed, bearing to bearing with thermal and overloaded protection.

Stainless steel pump body, large capacity, easy to prime.

Designed for intermediate or continuous operation.

High performance Noryl impeller for quiet performance.

Noryl built-in ejector.


Stainless steel rotary mechanical seal.

Maximum pressure of 65 PSI (1/2HP) and 70 PSI (3/4HP).



WWW.BURCAM.COM

PSHALLOW WELLPUMP


3/4HPHP 1/2HPHP



No water-air contact, rust-free operation. No water-tank contact, eliminates seeping. No waterlogging, eliminates the need for air volume controls.

SPRINKLER version

Designed for a maximum vertical lift of 25’ (7.5m) for the following water sources: sand point, lake or river.

Designed for intermediate or continuous operation.1’’ garden hose adaptor included.Strong and practical transportation handle.

With FLUOMAC

Electronic system. No need for a conventional type tank.Compact, portable, easy to use and store in wintertime.



506132SS 1/2HP506532SS 3/4HP

506520SS 1/2HP506530SS 3/4HP

ACKAGES

C/W 1/2HP506527SS wt ML25H 25 Litre506128SS wt ML60H 60 Litre506131SS wt ML80H 80 Litre

3/4HP506538SS wt ML60H 60 Litre506541SS wt ML80H 80 Litre


WWW.BURCAM.COM

PU M P S

506321506332

1/2HPHP506721506732

3/4HPHP

CONVERTIBLEJET

CAST IRONCAST IRONCONVERTIBLECONVERTIBLEConvertible jet pumps are designed for

shallow well installation for water levels up to 25 feet (7.5m), or for deep well installation for water levels up to 80 feet (24.5m).

TEFC motor,115 / 230V 60Hz totally enclosed, bearing to bearing. With thermal and overload protection.

Cast iron, large capacity, easy to prime.

Continuous duty capacitor to eliminate starting wear.

Radial type impeller for quiet performance.

Stainless steel shaft & rotary mechanical seal.

Designed for intermediate or continuous operation.

Maximum pressure of 85 PSI.


1/2 HP SUCTION CAPACITYPSI 0’ 5’ 10’ 15’ 20’ 25’ 30’ 40’ 50’ 60’ 70’ 80’0 840 806 638 546 412 277 647 521 412 328 286 185

20 750 720 570 488 368 248 578 465 368 293 255 16530 675 648 513 439 331 223 520 419 331 263 230 14940 600 576 456 390 294 198 462 372 294 234 204 13250 520 499 395 338 255 172 400 322 255 203 177 114

3/4 HP SUCTION CAPACITYPSI 0’ 5’ 10’ 15’ 20’ 25’ 30’ 40’ 50’ 60’ 70’ 80’0 855 821 650 556 436 308 684 556 436 342 299 214

20 750 720 570 488 383 270 600 488 383 300 263 18830 685 658 521 445 349 247 548 445 349 274 240 17140 620 595 471 403 316 223 496 403 316 248 217 15550 545 523 414 354 278 196 436 354 278 218 191 136

5’5’1.51.510’10’3.03.015’15’4.54.520’20’6.06.025’25’7.57.5

30’30’4.54.550’50’15.015.080’80’15.015.0

USGPH HEAD LPH

648 2452

513 1941

439 1661

331 1252

223 844

520 1968

331 1252

149 564

506 Convertible Series 1/2 HPat 30 psiFRICTION LOSS IN PIPE NOT INCLUDED

5’5’1.51.510’10’3.03.015’15’4.54.520’20’6.06.025’25’7.57.5

30’30’4.54.550’50’15.015.080’80’15.015.0

USGPH HEAD LPH

658 2490

521 1972

445 1684

349 1321

247 934

548 2074

349 1321

171 647

506 Convertible Series 3/4 HPat 30 psiFRICTION LOSS IN PIPE NOT INCLUDED

US GPH

US GPH


WWW.BURCAM.COM

PCONVERTIBLEJET PUMP

1/2HPHP CAST IRONCAST IRONCONVERTIBLECONVERTIBLE

C/W 1/2HP506327 wt ML25H 25 Litre506328 wt ML60H 60 Litre506331 wt ML80H 80 Litre

3/4HP506728 wt ML60H 60 Litre506731 wt ML80H 80 Litre

3/4HPHP

ACKAGES



No water-air contact, rust-free operation No water-tank contact, eliminates seeping No waterlogging, eliminates the need for air volume controls.

With FLUOMAC

Electronic system. No need for a conventional type tank. Compact, portable, easy to use and store in wintertime.



Ejector installed at the factory

Easy to install, simply use a two pipe system for deep well, no need to change the venturi

506332 1/2HP506732 3/4HP


WWW.BURCAM.COM

PU M P S


Pressure gaugesmodel

750768 0 - 100 1/8”750769 0 - 100 1/4”

Air volume controlTo maintain air to water ration in galvanized tanks.

750766 Air volume control750845 Plastic AVC kit750797 AV-45 AVC750798 AV-100 AVC750748 1/8” plastic tubing750767 1/4” plastic tubing

Pressure switchesFactory preset for 20 - 40 or 30 - 50 operating pressure

Rated for 1 HP / 115V. or 1.5HP / 230V.

Available with barb, female and male connection.

Selection chart

model preset psi connection

750775S 20 / 40 1/4” Barb750932S 30 / 50 1/4” Barb

750776S 20 / 40 1/4” Female750933S 30 / 50 1/4” Female750820A 40 / 60 1/4” Female

750777S 20 / 40 1/4” Male750934S 30 / 50 1/4” Male

750953S 20 / 40 1/8” Barb

750779 80 / 100 1/4” Female750820 40 / 60 1/4” Female

150159S 20 / 40 1/4” Female150147S 30 / 50 1/4” Female

BARB

FEMALE

MALE

JET


WWW.BURCAM.COM

PU M P SJET

Spring loaded bronze check valvesPrecision machined.

Tapered seat valve.

Abrasion resistant “O” ring.

Positive sealing.

Stainless steel spring.

Noise free and chatter proof action.MODEL

750749 diam. 1/2” 750760 diam. 3/4”750761 diam. 1” 750762 diam. 1 1/4”750763 diam. 1 1/2” 750764 diam. 2”

P V C check valvesFits any make of pump or water system.

Economic and water resistant.MODEL

750731 diam. 3/4” 750732 diam. 1”750733 diam. 1 1/4” 750738 diam. 1 1/2”

Foot valvesBRONZE

Assures positive and reliable operation.

Bronze body, stainless steel strainer, tapered seat and stainless steel spring.MODEL

750754 diam. 1/2” 750755 diam. 3/4”750756 diam. 1” 750757 diam. 1 1/4”750758 diam. 1 1/2” 750759 diam. 2”

P V C

Fits any make of pump or water system.

Economic and corrosion resistant.MODEL

750751P diam. 3/4” 750752P diam. 1” 750753P diam. 1 1/4” 750758P diam. 1 1/2”



WWW.BURCAM.COM

PU M P S


Well capsCast and aluminiummodels available.

Well seals

Well pointsCast Iron

Size Total Screen Gaugelength size

750770 1 1/4” X 24” X 18” 60G750975 1 1/4” X 24” X 18” 80G750771 1 1/4” X 30” X 24” 60G750778 1 1/4” X 30” X 24” 80G750772 1 1/4” X 36” X 30” 60G750773 1 1/4” X 36” X 30” 80G750985 1 1/2” X 36” X 30” 60G750986 1 1/2” X 36” X 30” 80G750994 2” X 36” X 30” 60G750995 2” X 36” X 30” 80G

Sand filter750896

The Visual Liquid Strainer (VLS) will stop sand and grit over 170 microns from getting in your critical valves and pump parts, etc.

Ideal for use with electronic Fluomac.

SpecificationsMax. Press.: 100 PSIMax. Temp.: 1300F (550C)Max. Vacuum: 30 InScreen Mesh: 60Screen Material: BrassThread Size: 1¼ In IPSBody Material: Cast iron

HEA

D L

OSS

FEE

TO

F W

ATER

FLOW OF WATER (US GPH)

2

5

4

6

8

10

10 15 20 30

Prod. # Diam.Well Prod. # Diam. well150178 8” 150180 8” Sealed

Prod. # Well Pipe Material750925 4” 1”-1 ¼” C.I.

Prod. # Well Pipe Material750926 6” 1”-1¼” C.I.

JET


WWW.BURCAM.COM

PU M P S

Bronze adaptors750865 1” long750866 1 1/4” long750870 3/4” short750871 1” short750872 1 1/4” short

Galvanized well seal venturi and elbows750860 1” MNPT Well seal elbow750861 1 1/4” MNPT Well seal elbow750863 1” X 10” Male venturi adaptor750864 1 1/4” X 10” Male venturi adaptor

Adaptors 750949 1” FNPT X 1” Barb long750865 1” NPT X 1” Barb long750866 1 1/4” NPT X 1 1/4” Barb long750870 3/4” NPT X 3/4” Barb short750871 1” X 1” Barb short750872 1 1/4” X 1 1/4” Barb short

Fittings750810 1/8” NPT X 1/4” Barb750811 1/4” NPT X 1/4” Barb750812 1/4” NPT X 1/4” Barb 900

750853 1/8” NPT X 1/8” Barb750855 1/4” NPT X 1/8” Barb750856 1/8” NPT X 1/8” Barb 900

JET


Hoses750918 3/4” Braided750919 1” Braided

Seals

750900 2000 5/8”750901 1000 5/8”

Frictionless cup & valve leathers750803 1 1/4” X 1/2”750804 1 1/4” X 5/8”750805 1 3/8” X 5/8”750806 1 1/2” X 1/2”750807 1 1/2” X 5/8”750808 1 5/8” X 5/8”

550550 Repair kit For cistern pump550551 3” X 2 1/16” For cistern pump550552 3” valve For cistern pump

Piston pump250254 300 Beatty1 1/4”250255 300 Beatty1 1/2”250260 K255 Duro250261 S250 Southern250262 K365 Duro

Iron rid95024B


WWW.BURCAM.COM

JET

AccessoriesAccessoriesPU M P S


WWW.BURCAM.COM

TA N K SCAPTIVE AIR

PRESSURE

Inter-Inter-changeablechangeableBLADDERBLADDER

600544 ML60 60 Litre600645 ML80 80 Litre600646 ML100 100 Litre600648 ML200 200 Litre600649 ML300 300 Litre

Pre charged Pressure switch TankProduct set to: should be Drawdown volume

600544 18 PSI 20/40 5.0 USGPH 15 USGPH28 PSI 30/50 4.0 USGPH





Bladder

Water

Air

Upright Designed for water systems equipped witha jet pump or a submersible pump.

No water-air contact, rust-free operation.No water-tank contact, eliminates seeping.No waterlogging, eliminates the need for air volume controls.

Replaceable bladder. Made of Butyl rubber to increase reliability and life span.

Tough, epoxy-baked finish.

Pressure:Tested to 100 PSI.Maximum operation pressure of 75 PSI.

Connection1” NPT for models 600544,6006451 1/4” NPT for models 600646, 600648, 600649through-tank connection, easy hook up with tee.

Factory pre-charged at 28 PSI


WWW.BURCAM.COM

A N K S CAPTIVE AIR

PRESSURE

inline

Designed for water systems equipped with a jet pump or a submersible pump.


Replaceable bladder. Made from Butyl rubber to increase reliability and life span.



Connection3/4” NPT through-tank connection,easy hook up with tee.


Pre charged Pressure switch Tank Product set to: should be Drawdown volume




T Inter-Inter-

changeablechangeableBLADDERBLADDER

Air

Water

Bladder

600641 ML8 8 Litre600542 ML20 20 Litre600643 ML35 35 Litre


WWW.BURCAM.COM

T A N K S

Horizontal

CAPTIVE AIRPRESSURE

Inter-Inter-changeablechangeableBLADDERBLADDER

Designed for water systems equipped witha jet pump.


Replaceable bladder. Made from Butyl rubber to increase reliability and life span.



Connection1” NPT through tank connection,easy hook up with tee.


Pre charged Pressure switch Tank Product set to: should be Drawdown volume




Air

Water

Bladder

600650 ML25H 25 Litre600652 ML60H 60 Litre600614 ML80H 80 Litre


WWW.BURCAM.COM

A N K SCAPTIVE AIR

PRESSURE T Upright

Designed for water systems equipped witha jet pump or a submersible pump.

Exclusive Butyl diaphragm. Polypropylene liner for complete corrosion resistance. Extremely resistant to bacterial growth in potable water.

Rubber air stem.

NSF standard 61 listed.

Pressure:Helium tested.Maximum operation pressure of 90 PSI.

Connection1” NPT Stainless steel tank connection.

Maximum working temperature is 200o F.


PermanentPermanentDIAPHRAGMDIAPHRAGM

Pre charged Pressure switch TankProduct set to: should be Drawdown volume






Air

Water

Diaphragm

600609 20 US Gal.

600619 26 US Gal.

600610 32 US Gal.

600656 86 US Gal.

600658 119 US Gal.


WWW.BURCAM.COM

TYPICAL INSTALLATIONTYPICAL INSTALLATION

Burcam 600650 600652 600614 600641 600542 600643 600544 600610 600609 600646 600619 600648 600649Tank ML 25H ML 60H ML 80H ML 8 ML 20 ML 35 ML60 VW 32 VW 20 ML100 VW26 XL ML200 ML300Quant. 3-6 8-11 12-15 1-2 2-4 5-7 8-11 16-19 11-13 16-19 13-15 20-35 36 +FixturesCapacity 7 15 20 2 5 9 15 32 20 26 26 53 85Drawdown

20/40 2.4 5.0 7.5 0.7 1.6 3.2 5.0 12.9 8.0 8.8 10.5 17.6 29.630/50 1.9 4.0 6.0 0.6 1.3 2.6 4.0 10.9 6.8 7.0 8.8 14.0 23.7

Std. Galvan. 15 30 42 10 15 20 30 82tank equiv. usgal usgal usgal usgal usgal usgal usgal usgal usgal usgal usgal usgal usgal

Concurrency equivalent chart

H2OW-TO HT-5.3H HT-14H HT-2 HT-4.4 HT-86 HT-14 HT-30 HT-20 HT-32 HT-62 HT-86WELL X TROL WX103PS WX200PS WX101 WX102 WX103 WX201 WX202 WX203 WX202XL WX251 WX302CON-AIR FP7100TH FP7110TH FP7105 FP7100 FP-7110 FP-710TH FP125 FP7130WELL-RITE RT-5 RT-6 RT-1 RT-3 RT-10 RT-2 RT-4 RT-7 RT-9AQUA-AIR V-6P V-15P V-25P V-45 V-60 V-100 V-200 V-260FLEXON JR6-01 JR15-02 JR25-03 WR45-01 WR60-02 WR100-03 WR200-02 WR260-03PERMA-AIR PADH-7 PADH-14 PIL-2 PIL-5 PIL-7 PAD-14 PAD-20 PAD-36S PAD-52 PAD-96

When using a separate tank from your pump, we recommend installing a captive airtank (as shown in our typical installation diaphragm), which has air injected into thetank at the factory. This air, in addition to atmospheric pressure, increases the abilityof the tank to deliver more water between on/off cycles, thus increasing the efficiency of your water system. Connect the pump discharge to the tank T, usingadaptors and braided hose, then connect the other side of tank T to your home’splumbing distribution line.

Make sure that the precharged air pressure (before connecting the tank) is 2 PSI lessthan the starting pressure selected on the pressure switch of your pump.

If you adjust the air pressure after the installation, follow these steps:

- Check the starting pressure of the pump on the pressure gauge.- Disconnect the power to the pump.- Open nearest faucet to the tank and relieve all pressure in tank,

then close the faucet.- Adjust the air pressure of the tank (by pumping or removing air at

the snifter valve). 2 PSI below pressure switch “ON” setting.- Turn power back on to pump.

Your tank is now precharged. Run the pump through a few cycles to verify that it functions properly.

Other types of tanks may be used, such as galvanized standard tanks, epoxy or glasslined tanks, although these products do not achieve the benefits of captive air tanks.

T A N K S


WWW.BURCAM.COM

1

2

5

3 4

6


A N K ST Fits all makes of captive air tanks, bottom discharge.

Made from durable bronze for long life.

650652 Short 4”

650651 Long 11”

650662 Long 11” with union

Typical assembly

1 Pressure switch (150159S)

2 Pressure gauge (750769)

3 Drain valve (650659)

4 Relief valve (150162)

5 Adaptor 1” female (750949)

6 3” nipple

Replaceable bladders

600501 ML8 Bladder600509 ML20 Bladder600509 ML25H Bladder600509 ML35 Bladder600503 ML40 Bladder600504 ML60 Bladder 600505 ML60 Bladder600505 ML60H Bladder600519 ML80 Bladder600519 ML80H Bladder600519 ML100 Bladder600520 ML200 Bladder600508 ML300 Bladder

Flanges

600516 ML8 3/4” Flange (4 holes, 4”)600512 ML20 3/4” Flange (5 holes, 6”)600517 ML25H 1” Flange (5 holes, 6”)600512 ML35 3/4” Flange (5 holes, 6”)600517 ML60 1” Flange (5 holes, 6”)600517 ML60H 1” Flange (5 holes, 6”)600517 ML80 1” Flange (5 holes, 6”)600517 ML80H 1” Flange (5 holes, 6”)600517 ML100 1” Flange (5 holes, 6”)600514 ML200 11/4” Flange (6 holes, 10”)600513 1” Flange (6 holes, 10”)600515 11/4” Flange (6 holes, 10.5”)600518 11/4” Flange (5 holes, 6”)


WWW.BURCAM.COM

700508230V

2.0 HPHP700506

230V

1.5 HPHP

HEAVY DUTYIRRIGATION

1.5HP SUCTION CAPACITYPSI 0’ 5’ 10’ 15’ 20’ 25’0 4680 4540 4352 4025 3744 2340

20 3850 3735 3581 3311 3080 192530 2950 2862 2744 2537 2360 147540 1700 1649 1581 1462 1360 850

USGPH

2.0HP SUCTION CAPACITYPSI 0’ 5’ 10’ 15’ 20’ 25’0 4800 4656 4464 4128 3840 2400

20 4300 4171 3999 3698 3440 215030 3200 3104 2976 2752 2560 160040 2200 2134 2046 1892 1760 1100

USGPH

HEAVY DUTY CAST IRON LAWN SPRINKLER

HIGH HEAD TYPE

Designed to be used with automatic sprinkler systems

Self priming large pump body.


Suction up to 15 feet depth.

Thermally protected motor.

Stainless steel shaft, bearing to bearing.

Capacity up to 25 sprinklers, 80 GPM US maximum flow, 110’ maximum head.

Can be used as a booster pump to increase pressure.

Brass impeller.

PU M P S


WWW.BURCAM.COM

Relationship of pipe size to water flowRelationship of pipe size to water flow

TECHNICALINFORMATION

A PRO TIP

MANY CONSUMERS DO NOTREALIZE THE RELATION-SHIP OF PIPE SIZE TOWATER FLOW.

A small increase in the sizeof the pipes you install foryour water system willcost you more initially, butwill contribute much morein increasing system effi-ciency and in providing forfuture needs.

Please note that the friction loss is applicableto all types of pumps.(Deep well submersible,jet, centrifugal, sump,sewage, etc.).

90°100’ straight pipe

3/4”

1”

1 1/4”1 1/2”

2”

The larger the pipe size, themore efficient your water system.

(Straight length + Fittings loss) x Factor in feet100

HEAD VS PSIEQUIVALENT

HEAD INFEET PSI

123456789

102030405060708090

100110120130140150160170180190200231

.4

.91.31.72.22.63.03.53.94.38.7

13.017.321.726.030.334.739.043.347.752.036.360.665.069.373.678.082.386.3

100.0

Example

Water flow

Pipe size 3/4” 1” 1 1/4” 11/2” 2”

Friction loss equivalent 88.6’ 25.7’ 6.6’ 3.0’ 0.9’

In feet of head% 444% 100% 25% 11% 3%BASE

Hei

ght 1

0’

GPH-GPM

60 1120 2180 3240 4300 5360 6480 8600 10900 151200 201500 251800 302100 352400 402700 453000 50

1/2”FT PSI

1.4 0.64.8 2.1

10.0 4.417.1 7.525.8 11.336.3 15.997.5 42.8

1.5’

0.8’

1.0’

3.6’

1.0’

3.3’

17.0’

3/4”FT PSI

0.4 0.21.2 0.52.5 1.14.2 1.86.3 2.88.8 3.9

15.2 6.726.0 11.449.7 21.886.9 38.1

2.0’

1.0’

1.4’

5.0’

1.5’

4.5

22.0’

1.0”FT PSI

0.1 0.00.4 0.20.8 0.41.3 0.61.9 0.82.7 1.24.6 2.06.9 3.0

14.6 6.425.1 11.038.4 16.950.0 21.962.8 29.984.0 36.9

2.7’

1.3’

1.7’

6.0’

2.0’

5.7’

27.0’

1 1/4”FT PSI

0.1 0.00.2 0.10.4 0.20.5 0.20.7 0.31.2 0.51.8 0.83.8 1.76.4 2.89.7 4.3

13.6 6.018.2 0.523.6 10.429.4 12.935.6 15.6

3.5’

1.7’

2.3’

8.3’

3.0’

7.6’

36.0’

1 1/2”FT PSI

0.1 0.00.2 0.10.3 0.10.3 0.10.6 0.30.8 0.41.7 0.72.9 1.34.4 1.96.3 2.88.4 3.7

10.7 4.713.5 5.916.5 7.2

4.3’

2.0’

2.7’

10.0’

3.0’

9.0’

43.0’

2.0”FT PSI

0.3 0.10.5 0.20.9 0.41.3 0.61.8 0.82.4 1.03.1 1.43.8 1.74.6 2.0

5.9’

2.5’

3.5’

13.0’

4.0’

12.0’

55.0’

Friction loss table per 100’ of polyethylene pipe


WWW.BURCAM.COM

GPM 18” 24” 30” 36” 48”2025303540455060708090

100125150175200225

GALLONS / FOOTOF BASIN DEPTH 13.25 23.5 36.8 53.0 94.2

GALLONS IN 2 1/2”OF BASIN DEPTH 33.10 58.8 92.0 132.5 235.5

FlowGPM 1” 1 - 1/4” 1 - 1/2” 2” 2 - 1/2” 3” 4” 6” 8”

G V Hf V Hf V Hf V Hf V Hf V Hf V Hf V Hf V Hf1 .30 .05 .19 .01 .14 .012 .60 .16 .37 .05 .28 .035 1.49 .90 .93 .28 .71 .157 2.09* 1.68 1.30 .53 .99 .27

10 2.99 3.25 1.86 1.02 1.41 .5215 4.48 6.88 2.79* 2.17 2.12* 1.11 1.35 .3720 5.98 11.72 3.72 3.69 2.83 1.89 1.80 .63 1.23 .2525 7.47 17.72 4.65 5.58 3.53 2.86 2.25* .96 1.53 .37 1.03 .1430 8.97 24.84 5.58 7.82 4.24 4.01 2.70 1.34 1.84 .52 1.24 .2035 10.46 33.04 6.51 10.40 4.95 5.33 3.15 1.78 2.15* .70 1.44 .2740 7.44 13.32 5.66 6.83 3.61 2.28 2.45 .89 1.65 .34 1.00 .1045 8.37 16.57 6.36 8.49 4.06 2.84 2.76 1.11 1.86 .42 1.12 .1250 9.30 20.14 7.07 10.32 4.51 3.45 3.07 1.35 2.06* .52 1.25 .1560 11.16 28.23 8.48 14.47 5.41 4.84 3.68 1.89 2.48 .72 1.50 .2170 9.90 19.25 6.31 6.43 4.29 2.52 2.89 .96 1.75 .2875 10.60 21.87 6.76 7.31 4.60 2.86 3.10 1.09 1.87 .3280 11.31 24.65 7.21 8.24 4.91 3.23 3.30 1.23 2.00* .36 .92 .0590 8.11 10.25 5.52 4.01 3.72 1.53 2.25 .45 1.04 .07

100 9.01 12.45 6.13 4.88 4.13 1.86 2.50 .55 1.15 .08125 11.28 18.83 7.67 7.37 5.16 2.81 3.12 .83 1.44 .13150 9.20 10.33 6.19 3.94 3.74 1.16 1.73 .18 1.02 .05175 10.73 13.75 7.22 5.24 4.37 1.49 2.02* .23 1.19 .06200 8.26 6.71 4.99 1.97 2.30 .30 1.36 .08225 9.29 8.35 5.62 2.45 2.59 .37 1.53 .10250 10.32 10.15 6.24 2.98 2.88 .45 1.70 .13275 11.35 12.10 6.86 3.55 3.17 .54 1.87 .15300 7.49 4.18 3.46 .64 2.04* .18325 8.11 4.84 3.74 .74 2.21 .20350 8.74 5.56 4.03 .86 2.38 .23375 9.36 6.31 4.32 .96 2.55 .27400 9.98 7.11 4.61 1.08 2.72 .30450 11.23 8.85 5.18 1.35 3.06 .37500 5.76 1.65 3.40 .45550 6.34 1.95 3.74 .54

Vertical Headin feet(lift)

Check Valve

Select minimum basin depth so that 2 1/2 ft. of basindepth in US Gallons = Pump Capacity in GPM

VELOCITY AND HEAD LOSS CHART FOR SDR-21 PIPE (Flow coefficient C=150)

V = Velocity in Ft./Sec.Hf = Head loss in Ft. per 100 Ft. of pipe.Q = Flow in GPM* Min. GPM & velocity per pipe size for

liquids containing solids.

REC

OM

MEN

DED

BA

SIN

DIA

MET

ERS Gate Valve


Flow calculation ChartsFlow calculation Charts


Offset jet pump frictionWhere the jet pump is offset horizontally from the well site, add the following distancesto the vertical lift to approximate capacity to be received.

PIPE FRICTION FOR OFFSET JET PUMPSFriction loss in feet per 100 feet offset

NOTE: Friction loss is to be added to vertical lift.

Installation of a long tailpipe on deep well Jet pumps

The pumping capacity of a deep well jet pump can bereduced to equalize with the well flow by installing a 35’tailpipe below the jet assembly

With tailpipe, pump delivery remains at 100% of capacitydown to the ejector level. If water level falls below that, flow decreases in proportion to drawdown as shown by figures.When delivery equals well inflow, the water level remainsconstant until the pump shuts off.

JET SIZEH. P.

SUCTION AND PRESSURE PIPE SIZES (in inches)1¼ x 1 1¼ x 1¼ 1½ x 1¼ 1½ x 1½ 2 x 1½ 2 x 2 2½ x 2 2½ x 2½ 3 x 2½ 3 x 3

1/2 18 12 8 6 3 23/4 22 16 11 6 41.0 25 16 9 6

1 1/2 13 8 5 32.0 20 13 7 53.0 13 9 6 4


OperationsBelow LineNot Recommended

MaximumPossibleDrawdown

Tail Pipeup to 35 feet

Jet Setting

Pressurepipe

Delivery pipe

Pump Capacity

Standing level

0 ft suction lift 100% rated GPM







WWW.BURCAM.COM


WWW.BURCAM.COM


Approximating Water Flow

It is possible to approximate water flow from horizontal or vertical pipes when it is notpractical to use flow meters or other measuring devices.

This can be done by measuring to the top of the flowing stream, always measuring thehorizontal distance “X” in inches as illustrated, and determining the flow from the chartshown below.

Approximate capacity, GPMfor full flowing horizontal pipes

Std. Wt. Steel pipeinside Dia. In. Distance X, in., When Y = 12”Nominal Actual 12 14 16 18 20 22 24 26 28 30 32

2 2.067 42 49 56 63 70 77 84 91 98 105 1122 ½ 2.469 60 70 80 90 100 110 120 130 140 150 160

3 3.068 93 108 123 139 154 169 185 200 216 231 2464 4.026 159 186 212 239 266 292 318 345 372 398 4255 5.047 250 292 334 376 417 459 501 543 585 627 6686 6.065 362 422 482 542 602 662 722 782 842 902 9628 7.981 627 732 837 942 1047 1150 1255 1360 1465 1570 167510 10.020 980 1145 1310 1475 1635 1800 1965 2130 2290 2455 262012 12.000 1415 1650 1890 2125 2360 2595 2830 3065 3300 3540 3775

Approximate capacity, GPMfor full flowing vertical pipes

Std. Wt. Steel pipeNominal Vertical height, H, of water jet, In.

I.D. Pipe in. 3 3.5 4 4.5 5 5.5 6 7 8 10 12

2 38 41 44 47 50 53 56 61 65 74 823 81 89 96 103 109 114 120 132 141 160 1774 137 151 163 174 185 195 205 222 240 269 2996 318 349 378 405 430 455 480 520 560 635 7008 567 623 684 730 776 821 868 945 1020 1150 127010 950 1055 1115 1200 1280 1350 1415 1530 1640 1840 2010

The accuracy of these methods will vary up to 10%.The pipe must be flowing full.

Y

X

D

D

H

WWW.BURCAM.COM

GU I D ETROUBLESHOOTING

Submersible pumpsProblems - Causes & Remedies

Approximately 90% of all complaints result from improper installation of the pump or well failure. Please read theseinstructions carefully. In most cases, a correct diagnosis of theproblem will suggest the proper remedy.

Fuses blow or circuit breaker trips when motor is started.Incorrect line voltage.Defective control box:

a) defective wiringb) incorrect components

Defective starting capacitor.Defective relay.Defective pressure switch.Pump is crooked well.Defective motor winding or cable.Pump is sand-locked.

Pump operates but delivers little or no water.Pump may be air locked.Water level in well too low.Discharge line check valve installed backward.Leak in drop pipe.Pump check valve jammed by drop pipe.Pump intake screen blocked.Pump parts worn.Motor shaft loose.

Pump starts too frequently.Pressure switch defective or out of adjustment.Leak in pressure tank above water level.Leak in plumbing system.Discharge in line check valve leaking.Air volume control plugged.Snifter valve plugged.

Motor does not start, but fuses do not blow.Overload protection out.No power.Defective control box.Defective pressure switch.

Fuses blow when motor is running.Incorrect voltage.Overheated overload protection box.Defective control box components.Defective motor wiring or cable.Pump becomes sand locked.

Pump won’t shut off.Defective pressure switch.Water level in well too low.Leak in drop pipe line.Pump parts worn.

Jet pumpsProblems - Causes & Remedies

Approximately 90% of all complaints result from improper installation of the pump or well failure. Please read theseinstructions carefully. In most cases, a correct diagnosis of theproblem will suggest the proper remedy.

Motor will not run.Be sure the switch is on.A fuse may be blown.Be sure the shaft turns properly.Motor starting switch may be defective.Wires at motor may be loose, disconnected, or wired incorrectly.Motor may be burned out.Pressure switch may be stuck in open position, or contacts may be dirty.

Motor runs but no water is delivered.Stop motor and reprime the pump. It may be necessary to repeat this operation several times.Leaky suction pipe, pressure pipe or air control connections.Foot valve may be stuck or strainer clogged by submergence in sand or mud.Ejector nozzle may be clogged.Pipe may not be pitched down from pump to well.Water level below foot valve.Pressure regulating valve may be out of adjustment.

Pumps does not deliver water full capacity.Water level in well lower than estimate. Check water level when pump is operating.Ejector nozzle clogged.Leaky suction pipe, pressure pipe or air control connections.Pipes may be corroded or limed causing excessive friction.Pipe size of offset lines too small.Foot valve stuck or strainer clogged. Motor not up to normal speed. For low voltage, check with power company.

Pump won’t shut off.Pressure switch may be out of adjustment. Small hole at water connection may be clogged.Ejector nozzle clogged.Water level in well lower than estimate, making it impossible for pump to develop sufficient pressure.Leaky pipes.Motor not up to normal speed. For low voltage, check with power company.

Pump starts and stops too often.Pressure tank waterlogged (no air cushion). Check air control device for defects. Drain tank and allow to fill with air.Leak in piping system. Faucets or valves open.Leaky foot valve.Pressure switch out of adjustment.Leak in pressure tank.

Motor runs hot and overload kicks out.Motor wired incorrectly. Check motor and switch instruction cards.Low voltage. Install heavier wiring if necessary. Check with power company.Poor ventilation. Motors need to be properly ventilated for cool running.Starting and stopping too often. Leak in pressure tank.

Pump is noisy.Set pump on concrete or substantial sub-base. Wooden bases amplify noises.

Air spurts from faucets.Airlogged tank (tank too full of air) caused by defective air volume control. Leak in suction side of pump.Gas in water.



WWW.BURCAM.COM

Ch a r t

How to select the correctpumping equipment.

THE ANSWERS TO FOUR BASIC QUESTIONS WILL HELP SELECT THE PROPER PUMP.

1 WHAT IS THE SIZE OF THE WELL ?The inside diameter of the well must be known so

that the proper size pump, injector or drop pipe and foot valve can be determined.

2 WHAT IS THE PUMPING LEVEL ?The vertical distance in feet from the pump to the

water level while the pump is operating. If the pump isinstalled away from the well and is on higher ground, thiselevation must also be included. The drawdown while beingpumped must not be confused with the standing water level.

3 WHAT SHOULD BE THE AVERAGE DISCHARGEPRESSURE ?

Usual average discharge pressure is 30 lbs., halfway between the 20 lb. to 40 lb. switch setting ofmost water systems. When the tank is installed away fromthe pump at a higher level, or when house or yard fixturesare above the pump and tank, a greater pressure is neededand a larger pump must be used.

4 WHAT CAPACITY IS REQUIRED ?The discharge capacity of the pump in gallons per

hour that is needed for satisfactory service. The pumpshould have enough capacity so that it can deliver the totalwater requirement in 2 hours of continuous operation.See table of water requirement at right.

DRAWDOWN

3Service

pressure

2Pumping

level

Setting

Horizontal pipe run

Totaldischarge

head

Elevation

1Wellsize

AVERAGE WATER REQUIREMENTS FOR GENERAL SERVICE AROUND THE HOME AND FARM

Each person per day, for all purposes • • • • • • • • • • • • • • • • • • • • • • 75 gal.Each horse, dry cow or beef animal • • • • • • • • • • • • • • • • • • • • • • • • 12 gal.Each milking cow • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 35 gal.Each hog per day • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 gal.Each sheep per day • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 2 gal.Each 100 chicken per day • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 gal.

AVERAGE AMOUNT OF WATER REQUIRED BY VARIOUS HOME AND YARD FIXTURES

Drinking fountain, continuously flowing • • • • • • • • • • • • • • 50 to 100 gal./dayEach shower bath • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Up to 30 gal.To fill bath tub • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 20 gal.To flush toilet • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4.5 gal.To fill sink • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 2 gal.To sprinkle 1/4” of water on each 1000 square feet of lawn • • • • • • 160 gal.Dish washing machine - per load • • • • • • • • • • • • • • • • • • • • • • • • • 10 gal.Automatic washer - per load • • • • • • • • • • • • • • • • • • • • • • • • Up to 60 gal.Regeneration of domestic water softener • • • • • • • • • • • • • • • • • 50-100 gal.

AVERAGE FLOW RATE REQUIREMENTS BYVARIOUS FIXTURES

Shower • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 to 6 gal. per minuteBathtub • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 to 8 gal. per minuteToilet • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 to 5 gal. per minuteSink • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1 to 3 gal. per minuteKitchen sink • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 2 to 3 gal per minute1/2” hose and nozzle • • • • • • • • • • • • • • • • • • • • • • • • • • • 200 gal. per hour3/4” hose and nozzle • • • • • • • • • • • • • • • • • • • • • • • • • • • 300 gal. per hourLawn sprinkler • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 120 gal. per hour

SIZING

TotalHead

Submergence


WWW.BURCAM.COM


WIRE AND FUSE TABLEFrom service entrance to pump motor or control box

* Fuse sizes according to national Electric Code. These fuses are maximum for protection of wiring only and do not give motor overload protection.** Wire sizes shown permit maximum voltage drop of 5%

Measurement of electric powerFor DC Power use DC voltmeter and DC ampmeter

Power W = E X I;

H.P. input = = W X 1.34

AC PowerSingle phaseUse Power single phase wattmeter;

H.P. input = = W X 1.34

3 Phasea) one 3 phase wattmeterb) Two single phase wattmeterc) Power co. revolving disc watt hour meter

Method for calculating power for a revolving disc watt hour meter.

Kilowatts input = KW in =

H.P. input = =

H.P. output = H.P. input X Motor efficiency

* K = Constant = Watts for one revolution of revolving discK is usually found on meter nameplate or on revolving disc.R = Number of revolutions of disc.t = Second for R revolutions.

Operating costC = Cost in dollars per 1000 gallonsC1 = Cost in dollars per acre inchr = Power rate per kilowatt hour (dollars)KW Input = Kilowatts (measured at the meter)GPH = Gallons per hour discharged by pumpGPM = Gallons per minute discharged by pump

Cost per 1000 gallons C =

Cost per 1000 gallons C1 =

Approximate cost of Operating Electric motor

* For any other rate multiply the rateExample: For ¾ H.P. pump, single phase at 3 cent per hourCalculation = .760 X 3 = 2.280 cents. (approx 2 ¼ per hour)

Max.*Full Fuse

H. P. Volts Load SizeAmps. Amps.

** Minimum wire size of rubber insulated copper wire A.W.G.Length wire from motor to meter or distribution point FEET

0-50 50-100 100-150 150-200 200-250 250-300 300-350 350-400 400-450 450-500 1/61/6

115230

3.01.5

1515

1414

1414

1414

1414

1414

1414

1414

1214

1214

1214

1/41/4

115230

4.02.0

1515

1414

1414

1414

1414

1414

1214

1214

1214

1214

1014

1/31/3

115230

5.02.5

1515

1414

1414

1414

1414

1214

1214

1214

1014

1014

1014

1/21/2

115230

7.23.6

2515

1414

1414

1414

1214

1214

1014

1014

1014

914

914

3/43/4

115230

9.24.6

3015

1414

1414

1214

1214

1014

1014

914

914

814

812

1.01.0

115230

12.06.0

4020

1414

1214

1214

1014

914

914

814

712

712

612

1.51.5

115230

16.08.0

5025

1414

1214

1014

914

814

712

712

612

510

510

2.02.0

115230

20.010.0

6030

1414

1214

1014

814

712

612

612

510

510

410

3.03.0

115230

29.014.5

9045

1214

1014

814

712

612

510

410

49

39

38

5.05.0

115230

46.023.0

15080

1014

814

612

510

410

39

28

27

17

16

W746

W746

K X R X 3.60t

KW Input X rGPH

451 X r X KW inGPM

K X R X 3600746 X t

4.83 X K X Rt

MotorH.P.

* Average kilowatts input orcost per hour based on 1

cent per kilowatts / hr.MotorH.P.

* Av. Kw input orcost per hour

based on 1 centper Kw/hr.3 - phase1 - Phase 3 - Phase

1/41/31/23/41.01.52.03.05.07.510.0

.305

.408

.535

.7601.001.5002.0002.954.656.909.30

.....

.....

.520

.768

.9601.411.822.704.506.759.00

1520253040506075

100125150200

12.816.920.825.033.241.349.561.581.5

102.122.162.


WWW.BURCAM.COM

BURKE manufactures water systems and related accessories and offers a complete line of products for retailers, wholesalers, pump specialty houses and well-drillers around the world.The company is extremely dynamic and is always concerned about meeting the needs of themarket and providing value to its customers. BURKE is a leader thanks to the quality of itsproducts, its innovations and its customer service. With 25 years of experience, BURKE relieson its own creative ability to constantly improve its range of products, and to suggest exclusive and innovative water systems and accessories to its customers.

THE BURKE PHILOSOPHY:

When I founded BURKE WATER SYSTEMS in 1979, my priority was to offer a line of pumps and accessories that wouldmeet the real and specific needs of customers in Eastern Canada. Today, 25 years later, our products are in demand around the world and our mission statement remains the same - each one of our pumps has to perfectly meet a specific need.

Industry professionals have often praised BURKE for quality and customer service. However, our customers, the endconsumer, are the ones who realize our greatest product qualities - reliability and longevity. To maintain this reputation,we continue to offer products that are not only dependable and efficient, but are innovative and consumer friendly. I am particularly proud of our company's ability to launch one new innovative product into the market each year. Byinnovative, I don't mean a cosmetic approach, but a true innovation that comes from our commitment to research anddevelopment.

BURKE has become a leader in its industry. Over the last 25 years we have developed the internal structure and thebusiness acumen necessary to provide outstanding sales and service that offers our customers peace-of-mind. We havebeen successful in capturing a considerable share of the market - but we have not done it alone. We owe a great dealof our success to the support of our marketing partners and our steadfast commitment to always making sure that thecustomer is satisfied.

Donald BURKEPresident and C.E.O.

Documents

TECHNICAL I Catalogue ndex · 4 info - pumps 1 800 361-1820 10 gpm 4” submersible deep well 1/2hp