FT074EN_A_0913_MTX625 www.manitou.com

Technical daTa sheeT

FT074EN_A_0913_MTX625

This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the rightto change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differfrom actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure areprovided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes

Rough terrain load chartstandard EN1459 B

MT-X 625LiftingMax. capacity 2500 kgMax. lifting height 5.85 mMax. outreach 3.40 mBreak-out force with bucket 3427 daNUnladen timeLifting 8.0 secsLowering 5.4 secsExtension 5.6 secsRetraction 4.3 secsCrowd 3.5 secsDump 3.6 secsTyres 12-16.5 12PR SKS CL TUBELESSBrakingService brake oil immersed multi-disc brakingParking brake negative oil immersed multi-discEngine KUBOTA - STAGE 3AType V3307-DI-T-E3BCubic capacity 4 cyl. - 3331 cm3

Power 75 HP/55.4 kWMax. torque 265 Nm at 1400 rpmInjection directCooling waterLaden drawbar pull 4035 daNTransmission torque converter 4 wheel driveReversing shift electrohydraulic controlNumber of gears (forward/reverse) 2/2Max. travel speed(may vary according to applicable regulations)

25 kph

Steering mode 4 wheel steer - 3 Steering Modes

Controls JSM® Joystick multi - functionLoad Limiter Cut off system - EN15000 Norm

Hydraulics

Pump gear type with priority valve88 l/min - 235 bar

CapacitiesHydraulic oil 115 lFuel 63 lUnladen weight (with forks) 4710 kgDimensions1. Front wheel centre to carriage 0.99 m2. Ground clearance 0.33 m3. Overall length to carriage 3.89 m4. Wheelbase 2.30 m5. Rear wheel centre to rear face 0.60 m6. Overall width of cab 0.80 m7. Inside tyre width 1.49 m8. Overall width 1.81 m9. Overall height 1.92 mStandard forks (length x width x thickness) 1200 x 125 x 45 mmTurning radius (over tyres) 3.31 mCarriage rotation (crowd/dump) 12°/117°Noise and vibrationNoise at driving position (LpA) 75 dBEnvironmental noise (LwA) 104 dBVibration to whole hand/arm <2.50 m/s²

5

3

1 4

2

87

6

9