1
Specifications subject to change without notice TECHNICAL DATA SCAVENGER SERIES EF 04W Dwg: DS-S08-063 Rev: B Date: 11/2009 Section Scavenger Tab Effluent Pumps Page MOTOR SPECIFICATIONS Motor Design NEMA design B, squirrel cage induction, oil filled (non toxic) Motor Type Enclosed submersible Insulation Class Class B, rated at 120° C Motor Protection Integral Bi-Metallic current sensing switch providing over temperature shut down Service Factor 1.0 Voltage Tolerance ± 10% from nominal Approvals Approved by CSA to UL 778 and CSA C22.2-108 standards MOTOR DATA, 60Hz Output Full Locked NEMA Power Motor Pole/ Model Phase Power Volts Load Rotor Code Factor Efficiency Speed bhp Amps Amps Letter 100% Load 100% Load (rpm) EF 04W 1 0.4 115 9.1 37.5 N 0.79 43 2/3450 MATERIALS of CONSTRUCTION Motor Housing Cast Iron ASTM A48 Class 30B Volute Cast Iron ASTM A48 Class 30B External Hardware 304 Stainless Steel O-Rings Buna-N Motor Shaft 420 Stainless Steel Oil Non-toxic white mineral oil (Marcol 52) Upper Bearing Single row ball bearing Lower Bearing Single row ball bearing. Lower Shaft Seal Spring loaded rotating carbon face w/ stationary ceramic face. Impeller Polybutylene Terephthalate (PBT) 30% glass fiber, Vortex DIMENSIONS, WEIGHT, AND MISC. Pump weight, single phase (lb.) 28.6 Maximum submergence (feet) 66 Discharge size, standard 2 Inch, Vertical Discharge thread type Female NPT Discharge size, optional none Maximum temp. of pumped fluid 40°C continuous, 50°C intermittent CABLE SPECIFICATIONS MODEL POWER CABLE Quantity, Type LENGTH, Feet OUTER JACKET EF 04W 1 - 16/3 SJTOW-A or equiv. 115V w/ 3 prong plug 20 Thermoplastic elastomer

TECHNICAL DATA SCAVENGER SERIES EF 04W · TECHNICAL DATA SCAVENGER SERIES EF 04W Dwg: DS-S08-063 Rev: B Date: 11/2009 Section Scavenger Tab Effluent ... oil filled (non toxic) Motor

  • Upload
    others

  • View
    10

  • Download
    0

Embed Size (px)

Citation preview

  • Specifications subject to change without notice

    TECHNICAL DATA SCAVENGER SERIES EF 04WDwg: DS-S08-063 Rev: B Date: 11/2009 Section Scavenger Tab Effluent Pumps Page

    MOTOR SPECIFICATIONS Motor Design NEMA design B, squirrel cage induction, oil filled (non toxic) Motor Type Enclosed submersible Insulation Class Class B, rated at 120° C Motor Protection Integral Bi-Metallic current sensing switch providing over temperature shut down Service Factor 1.0 Voltage Tolerance ± 10% from nominal Approvals Approved by CSA to UL 778 and CSA C22.2-108 standards

    MOTOR DATA, 60Hz

    Output Full Locked NEMA Power Motor Pole/ Model Phase Power Volts Load Rotor Code Factor Efficiency Speed

    bhp Amps Amps Letter 100% Load 100% Load (rpm) EF 04W 1 0.4 115 9.1 37.5 N 0.79 43 2/3450 MATERIALS of CONSTRUCTION

    Motor Housing Cast Iron ASTM A48 Class 30B Volute Cast Iron ASTM A48 Class 30B External Hardware 304 Stainless Steel O-Rings Buna-N Motor Shaft 420 Stainless Steel Oil Non-toxic white mineral oil (Marcol 52) Upper Bearing Single row ball bearing Lower Bearing Single row ball bearing. Lower Shaft Seal Spring loaded rotating carbon face w/ stationary ceramic face. Impeller Polybutylene Terephthalate (PBT) 30% glass fiber, Vortex

    DIMENSIONS, WEIGHT, AND MISC.

    Pump weight, single phase (lb.) 28.6 Maximum submergence (feet) 66 Discharge size, standard 2 Inch, Vertical Discharge thread type Female NPT Discharge size, optional none Maximum temp. of pumped fluid 40°C continuous, 50°C intermittent

    CABLE SPECIFICATIONS MODEL POWER CABLE

    Quantity, Type LENGTH,

    Feet OUTER JACKET

    EF 04W 1 - 16/3 SJTOW-A or equiv. 115V w/ 3 prong plug 20 Thermoplastic elastomer

    /ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False

    /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure true /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice