Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Technical data for TZe and HGe tapes.
www.brother.dk
Brother P-touch laminated labels have been designed to last, wherever you use them
Whether you need a professional labelling solution for the office, industry or home, Brother P-touch laminated labels have been designed with you in mind. We’ve thought about exactly when, where and how you might need to use our labels and put them through a series of rigorous tests, which means that even when they’re exposed to heavy abrasion, heat, cold, sunshine, water and chemicals, our labels have been designed to last.
Brother P-touch laminated labels
protective coating (PET) 38µ
Why do Brother P-touch laminated labels last longer?
Laminationprovides anextra protectiveovercoat
Brother P-touch laminated TZe tapes consist of six layers of materials, resulting in a thin, extremely strong label. Characters are formed with a thermal transfer ink and sandwiched between two protective layers of PET (polyethylene film). The result is a virtually indestructible label that can withstand even the harshest conditions.
In fact, we are sure about the durability of our labels because we’ve tested them to the extreme, against the effects of abrasion, temperature, chemicals and sunlight. Our results prove that Brother P-touch laminated labels out-perform competitor labels, staying legible and attached, so you can be confident of a professional quality label that has been designed to last.
The following pages will show you exactly how our labels are tested tothe extreme.
Unlike ordinary labels, our laminated tape technology ensures that a layer of super-clear polyethylene laminate protects your text.
protective coating (PET)adhesive (acrylic)coloured base film (PET)adhesive (acrylic)backing paperlettering
Laminated
Laminated
Abrasion Test
Brother’s tape lamination technology ensures that Brother P-touch laminated labels can even withstand heavy abrasion.
The Abrasion Test Procedure
A 1kg sanding device was passed over Brother P-touch laminated labels, and non-laminated competitor labels. After 50 return passes the characters underneath the Brother P-touch laminated label were completely unaffected and the lamination was only slightly scratched.
Abrasion Resistant Labels
Brother P-touch Laminated Label
Non-Laminated Competitor Label
Can withstand heavy abrasion
Abrasion Tests Results
Brother P-touch laminated TZe label = No effect on print quality
Competitor non-laminated label = Print quality affected
Abrasion Resistant
Abrasion Resistant
Temperature Test
Whether you want to use our labels in freezing conditions or extremely warm environments, our labels have been designed to last. In fact, results show that Brother P-touch laminated labels can withstand temperatures from -80°C to +150°C.
The Temperature Test Procedure
Brother P-touch laminated labels were attached to stainless steel plates at room temperature, then heated and cooled for a specified time. After 72 hours at -80°C no noticeable change in tape adhesive or colour had occurred. After 2 hours at +150°C, despite slight discolouration of the tape, the text on the label remained completely intact*. We recommend TZe-M931/951/961 (black on matt silver) as most resistant to discolouration under high temperatures, and Flexible-ID tapes as most suitable when used in an Autoclave/Sterilising unit.
Temperature Resistant Labels
Resistant to temperatures of -80° to +150°
Test ResultsLabel performance after exposure to heat and cold
Test: TemperatureTemperature: +100°cDuration: 240 hoursLabels: Brother P-touch Laminated Label
Temperature Brother Laminated Labels*When used under extremely high temperatures or for long periods of time the laminate film may be separated, discoloured or shrink. If in doubt, request a free tape sample from Brother to perform your own testing.
= No noticeable change
= Text is legible but there was some tape discolouration. Matt silver tapes are most resistant to discolouration due to heat, and Flexible-ID tapes as most suitable when used in an Autoclave/Sterilising unit
Hours
72
72
240
240
240
2
Temperature Resistant
Temperature Resistant
Fade Test
*478 hours approximates to 1 year in outdoor sunny conditions
Fade Meter (Time - ∆ E)
Tape Colour
Transparent
White
Red
Blue
Yellow
Green
Fluorescent Orange
Fluorescent Yellow
Black
Extra Strength Adhesive - White
Flexible ID - White
478h*236h118h
24.6915.699.66
3.181.580.83
54.615.951.65
5.712.851.27
57.255.5722.59
3.771.621.24
54.4350.3346.57
84.6685.0981.02
1.110.180.55
3.181.580.83
3.942.351.49
Wherever you use P-touch laminated labels, they have been designed to stay as clear and legible as the day they were applied.
Several Brother P-touch laminated labels in various colours were attached to stainless steel plates, and exposed to simulated outdoor UV radiation of approximately 12 months, and changes in the base colour of the tape could be observed (test compliant with JIS K7350-2/ISO 4892-2).
The printed text on all tapes remained unchanged and was perfectly legible. The red, yellow and fluorescent tapes, however, showed some fading to the tape background colour. Other tape colours showed little or no change.
Fade Resistant Labels
Resistant to ultraviolet exposure
*∆ E (Delta E) results showing the amount of fading on various colours of TZe tape when placed in one year of simulated sunlight.
Fade Test results
Fluorescent Yellow
Yellow
Fluorescent Orange
Red
Transparent
Blue
White
Green
Extra Strength Adhesive - White
Flexible ID - White
Black
Hours
0h 118h 236h 478h*
90
80
70
60
50
40
30
20
10
0
Fade Resistant
Fade Resistant
Water and Chemical Submersion Test
• • • • • • • • •
Water and chemical resistance tests were conducted in two stages:
Stage 1- The water and chemical submersion testStage 2 - The water and chemical abrasion test
To test Brother P-touch laminated labels against the effects of water and chemicals, the tapes were firstly attached to glass slides and immersed in a variety of liquids for 2 hours. No change in the print quality occurred and the labels remained affixed to the slides.
Although some labels soaked in certain chemicals showed slight separation of the laminate film, rubbing the labels with the same chemicals had no effect at all. So even if chemicals are spilled on your Brother P-touch laminated labels, a quick wipe should be enough to prevent any damage.
Water and Chemical Resistance
Stage 1 Water and Chemical Submersion Test Procedure
Test: Water and ChemicalChemical: Ethanol SubmersionDuration: 2 hoursLabels: Brother P-touch Laminated Label
Water resistant
Resistant to a wide range of industrial chemicals
Test Results for Brother P-touch Laminated Labels
= no print discolouration•
Toulene Hexane Ethanol Ethyl Acetate Acetone Mineral Spirit Water 0.1NHydrochloric
0.1 SodiumHydroxide
ChemicalResistant
WaterResistant
ChemicalResistant
WaterResistant
Water and Chemical Abrasion Test
•
•
x
• • •
x
•
x
• • • •
x
• • • • • •
TestResults
P-touchLaminated Label
Non-LaminatedCompetitor Label
= Print quality unaffected = Print quality affected
Water and Chemical Resistance
Brother P-touch laminated tape was affixed to several glass plates. A 500g weight with a chemical and solvent infused cloth was passed over each label 20 times. As the results below show, the print quality of Brother P-touch laminated labels was unaffected, unlike our competitor’s non-laminated labels.
Labels After TestingTest: Chemical Abrasion Chemical: Acetone
Brother P-touch Laminated Label
Non-Laminated Competitor Label
Stage 2 Water and Chemical Abrasion Test Procedure
Water resistant
Resistant to a wide range of industrial chemicals
Toul
ene
Hexa
ne
Etha
nol
Ethy
l Ace
tate
Acet
one
Min
eral
Spi
rit
Wat
er
0.1N
Hydr
ochl
oric
0.1
Sodi
umHy
drox
ide
ChemicalResistant
WaterResistant
Strong Adhesion Test
7.6
10
7.6
2.8
7.2
10.1
8.6
11.5
6.9
11.5
3.3
7.4
6.4
11.5
6.4
4.3
7.8 7 6.2 6.6
The Adhesion Test Procedure
To test the adhesive strength of Brother P-touch laminated tapes, 12mm standard, extra strength adhesive, flexible ID and security tape were affixed to a variety of materials at room temperature and left for 30 minutes. Adhesive strength was tested by removing the tape at an angle of 180 degrees. This testing method complies with Japanese Standard JIS Z0237 testing.
Test Results
The table explains that an adhesive strength of approximately 6 Newtons* was maintained with most materials. Our strong adhesive tape maintained an average of 50% more adhesive strength compared to our standard tape and is suitable for more demanding surfaces such as polypropylene.
Strong Adhesion
Strong adhesionto a wide range of surfaces
* Results in Newtons for 12mm width tape
StandardTZe Tape
Extra StrongAdhesive TZe tape
Flexible ID tape
Security tape
Stai
nles
s St
eel
Glas
s
PVC
Acry
lic
Poly
prop
ylen
e
Poly
este
rCo
ated
Woo
d
StrongAdhesion
StrongAdhesion
TZe-
21
1TZe-
22
1TZe-
23
1TZe-
24
1TZe-
25
1TZe-
26
1
TZe-
11
1TZe-
12
1TZe-
13
1TZe-
14
1TZe-
15
1TZe-
16
1
TZe-
42
1TZe-
43
1TZe-
44
1TZe-
45
1TZe-
46
1
TZe-
52
1TZe-
53
1TZe-
54
1TZe-
55
1TZe-
56
1
TZe-
61
1TZe-
62
1TZe-
63
1TZe-
64
1TZe-
65
1TZe-
66
1
TZe-
63
1S
1
TZe-
72
1TZe-
73
1TZe-
74
1TZe-
75
1
TZe-
22
3TZe-
23
3TZe-
24
3TZe-
25
3TZe-
26
3
TZe-
22
2TZe-
23
2TZe-
24
2TZe-
25
2TZe-
26
2
TZe-
13
2
TZe-
13
3
TZe-135
TZe-145
TZe-
31
5TZe-
32
5TZe-
33
5TZe-
34
5TZe-
35
5TZe-
36
5
TZe-
53
5TZe-
55
5
TZe-
43
5
TZe-
33
4TZe-
34
4TZe-
35
4
TZe-
SE4
TZe-
FX2
11
TZe-
FX2
21
TZe-
FX2
31
TZe-
FX2
41
TZe-
FX-2
51
TZe-
FX2
61
TZe-
FX6
11
TZe-
FX6
21
TZe-
FX6
31
TZe-
FX6
41
TZe-
FX6
51
TZe-
FX6
61
TZe-
S2
11
TZe-
S2
21
TZe-
S2
31
TZe-
S2
41
TZe-
S2
51
TZe-
S2
61
TZe-
S1
21
TZe-
S1
31
TZe-
S1
41
TZe-
S1
51
TZe-
S6
21
TZe-
S6
31
TZe-
S6
41
TZe-
S6
51
TZe-
B3
1TZe-
B5
1
TZe-
C3
1TZe-
C5
1
TZe-
M3
1 (
8m
)
TZe-
MQ
G3
5 (
5m
)
TZe-
MQ
L35
(5
m)
TZe-
MQ
P3
5 (
5m
)
TZe-
M9
21
TZe-
M9
31
TZe-
M9
51
TZe-
M9
61
TZe-
FA3
TZe-
FA4
TZe-
N2
01
TZe-
N2
21
TZe-
N2
31
TZe-
N2
41
TZe-
N2
51
HG
e-2
31
V5
HG
e-2
51
V5
HG
e-2
61
V5
Tap
e O
ptio
ns
Ink
colo
urTa
pe c
olou
r3.
5 m
m6
mm
9 m
m12
mm
18 m
m24
mm
36 m
m
STAN
DARD
LAM
INAT
ED -
8 M
ETRE
Sbl
ack
blac
kbl
ack
blac
kbl
ack
blac
kbl
ack
blue red
red
blue
whi
tew
hite
whi
tew
hite
gold
whi
tetra
nspa
rent
red
blue
yello
wye
llow
gree
nw
hite
whi
tetra
nspa
rent
trans
pare
nttra
nspa
rent
blac
kbl
ue red
blac
kSE
CURI
TY L
AMIN
ATED
- 8
MET
RES
FLEX
IBLE
ID L
AMIN
ATED
- 8
MET
RES
STRO
NG A
DHES
IVE
LAM
INAT
ED -
8 M
ETRE
S
FLUO
RESC
ENT
LAM
INAT
ED -
5 M
ETRE
S
MAT
T LA
MIN
ATED
- 8
MET
RES
/ 5 M
ETRE
S
MET
ALLI
C LA
MIN
ATED
- 8
MET
RES
FABR
IC -
3 M
ETRE
S
NON-
LAM
INAT
ED -
8 M
ETRE
S
HIGH
GRA
DE L
AMIN
ATED
1 - 8
MET
RES
blac
kw
hite
blac
kbl
ack
whi
teye
llow
blac
kbl
ack
blac
k
whi
tetra
nspa
rent
yello
w
blac
kbl
ack
fluor
esce
nt o
rang
eflu
ores
cent
yel
low
blac
kw
hite
whi
tew
hite
trans
pare
ntlim
e gr
een
light
gre
ybe
rry p
ink
blac
ksil
ver (
mat
t)
blue
whi
te
blac
kw
hite
blac
kw
hite
HGe-131V5
HGe-151V5
HGe-631V5
HGe-651V5
HGe-M931V5
HGe-M951V5
TZe-PR831
TZe-PR851
TZe-PR935
TZe-PR955
TZe-MQ531
TZe-MQF31
TZe-MQE31
TZe-MPSL31
TZe-MPGG31
TZe-MPRG31
TZe-MPPH31
TZe-RN34
TZe-RW34
TZe-RE34
TZe-R231
TZe-R234
STe-141
STe-151
STe-161
HSe-211
HSe-221
HSe-231
HSe-241
HSe-251
3 Mod
el s
uita
ble
for H
eat S
hrin
k Tu
be 5
.8 –
17.
7 m
m
4 M
odel
sui
tabl
e fo
r Hea
t Shr
ink
Tube
23.
6 m
m
1 For
Bro
ther
P-to
uch
9500
PC, 9
700P
C, 9
800P
CN, D
800W
, P90
0W, P
950N
W, R
L700
S
2 For
Bro
ther
P-to
uch
9200
PC, 9
200D
X, 9
400,
360
0, 9
600,
950
0PC,
970
0PC,
980
0PCN
, RL7
00S,
D80
0W, D
900W
, P95
0NW
Mod
el C
ompa
tabi
lity
PREM
IUM
LAM
INAT
ED -
8 M
ETRE
S
P AST
EL L
AMIN
ATED
- 4
MET
RES
PATT
ERNE
D LA
MIN
ATED
- 4
MET
RES
RIBB
ON N
ON-L
AMIN
ATED
- 4
MET
RES
ETCH
ING
/ STE
NCIL
NON
LAM
INAT
ED2 -
3 M
ETRE
S
blac
kbl
ack
blac
k
t rans
pare
ntye
llow
silve
r (m
att)
blac
kw
hite
prem
ium
glit
ter g
old
prem
ium
glit
ter s
ilver
blac
kbl
ack
blac
k
past
el b
lue
past
el p
urpl
epa
stel
pin
k
blac
kbl
ack
blac
kbl
ack
silve
r lac
ego
ld g
eom
etric
red
ging
ham
pink
hea
rts
gold
gold
gold
blac
kgo
ld
navy
blu
ew
ine
red
pink
whi
tew
hite
blac
kw
hite
HEAT
SHR
INK
TUBE
, NON
LAM
INAT
ED -
1.5
Mbl
ack
whi
te
Ink
colo
urTa
pe c
olou
r5.
8 m
m8.
8 m
m11
.7 m
m17
.7 m
m23
.6 m
m
Mod
el
3.5
mm
6 m
m9
mm
12 m
m18
mm
24 m
m36
mm
1010
, 109
0, 1
230P
C, 1
280,
12
80DT
, 129
0, 1
290D
T, 12
90VP
, 18
30VP
, 203
0VP,
2100
VP,
2430
PC, 2
700V
P, 27
30VP
, 71
00VP
, 970
0PC,
980
0PCN
, D2
00, D
200B
W, D
200V
P, D2
00BW
VP, D
210,
D21
0VP,
D400
, D40
0VP,
D450
VP, D
600V
P, D8
00W
, E10
0, E
100V
P, E1
10,
E110
VP, E
300V
P, E5
00VP
, E5
50W
VP, H
105,
H10
5WB,
H11
0,
H200
, H30
0, H
300L
I, H5
00,
H500
LI, P
300B
T, P7
00, P
750W
, P9
00W
, P95
0NW
, RL7
00S
200,
210
E, 2
20, 3
00, 3
10, 3
40, 3
40C,
350
, 540
, 540
C, 5
50, 9
00F,
1000
, 101
0, 1
090,
120
0, 1
200P
, 12
30PC
, 125
0, 1
250J
, 125
0S, 1
260V
P, 12
80, 1
280D
T, 12
90, 1
290D
T, 12
90VP
, 175
0,18
R, 1
800,
180
0E,
1830
VP, 1
850,
195
0VP,
2030
VP, 2
100V
P, 24
00, 2
400E
, 242
0PC,
243
0PC,
245
0, 2
450D
X, 2
460,
247
0,
2480
, 250
0PC,
270
0VP,
2730
VP, 3
600,
710
0VP,
7500
VP, 7
600V
P, 92
00PC
, 920
0DX,
940
0, 9
500P
C, 9
600,
97
00PC
, 980
0PCN
, D20
0, D
200B
W, D
200V
P, D2
00BW
VP, D
210,
D21
0VP,
D400
, D40
0VP,
D450
VP, D
600V
P, D8
00W
3, 4, E
100,
E10
0VP3 , E
110,
E11
0VP,
E300
VP, E
500V
P4 , E55
0WVP
3, 4, H
105,
H10
5WB,
H11
0, H
200,
H3
003 , H
300L
I3 , H50
03, 4, H
500L
I3, 4, P
-TOU
CH C
UBE
(P30
0BT)
, P70
03, 4, P
750W
3, 4, P
900W
3, 4, P
950N
W3,
4,
RL70
0S, P
-TOU
CH C
UBE
PLUS
(P71
0BT)
210E
, 220
, 300
, 310
, 340
, 340
C,
350,
540
, 540
C, 5
50, 1
750,
18R
, 18
00, 1
800E
, 183
0VP,
1850
, 19
50VP
, 203
0VP,
2100
VP, 2
400,
24
00E,
242
0PC,
243
0PC,
245
0,
2450
DX, 2
460,
247
0, 2
480,
25
00PC
, 270
0VP,
2730
VP, 3
600,
75
00VP
, 760
0VP,
9200
PC,
9200
DX, 9
400,
950
0PC,
960
0,
9700
PC, 9
800P
CN, D
400,
D4
00VP
, D45
0VP,
D600
VP,
D800
W, E
300V
P, E5
00VP
, E5
50W
VP, H
300,
H30
0LI,
H500
, H5
00LI
, P70
0, P
750W
, P90
0W,
P950
NW, R
L700
S,P-
TOUC
H CU
BE P
LUS
(P71
0BT)
350,
540
, 540
C, 5
50, 2
400,
24
00E,
242
0PC,
243
0PC,
245
0,
2450
DX, 2
460,
247
0, 2
480,
25
00PC
, 270
0VP,
2730
VP, 3
600,
75
00VP
, 760
0VP,
9200
PC,
9200
DX, 9
400,
950
0PC,
960
0,
9700
PC, 9
800P
CN, D
600V
P, D8
00W
, E50
0VP,
E550
WVP
, H50
0,
H500
LI, P
700,
P-T
OUCH
CUB
E PL
US (P
710B
T), P
750W
, P90
0W,
P950
NW, R
L700
S
550,
360
0, 9
200P
C, 9
200D
X,
9400
, 950
0PC,
960
0, 9
700P
C,
9800
PCN,
D80
0W, P
900W
, P9
50NW
, RL7
00S
Choosing TheRight Tape
Brother P-touch laminated tapes are available in a wide range of tape colours, widths and styles. Your application and your choice of P-touch model should guide your ultimate tape selection. The table below will also help you to determine the correct tape for your applications.
Choose the right tape for the job
Choose the right tape for the job
TZe
Lam
inat
ed
Stro
ngAd
hesi
ve
Flex
ible
ID
Secu
rity
Heat
Shrin
k
FlatSurface
CurvedSurface
CableFlag
CableWrap
Smooth
Textured
Smooth
Textured
Smooth
Textured
Smooth
Textured
Acceptable Not RecommendedRecommended
Model name Width Recommended cable diameterØ1.7mm to 3.2mmØ2.6mm to 5.1mmØ3.6mm to 7.0mmØ5.4mm to 10.6mmØ7.3mm to 14.3mm
5.8mm8.8mm11.7mm17.7mm23.6mm
HSe-211HSe-221HSe-231HSe-241HSe-251
Choosing TheRight Tape
• • • • •
• • • • ∆ *1
• • • • ∆ *2
• • • • •
Further Tests
The Autoclave Adhesion Test Procedure
Test Results
Laminationprovides anextra protectiveovercoat
Brother P-touch flexible ID tape was affixed to flat and smooth stainless steel at room temperature. The condition of the tape was observed after it was processed in an autoclave under the following test conditions.
Autoclave test machine: Steam steriliser GETINGE HS22
Test program: B cycle P11 *EN (European Standard) prEN13060 standard compliant
Pre-vacuum: 4 times
Sterilising temperature: 134 °C
Sterilising duration: 5 minutes
Drying duration: 20 minutes
*1 some tape discolouration may be observed*2 some separation off the laminate film may be observed
The table shows high durability of our flexible ID tape during the test. After several process cycles, some slight discolouration was observed. Nevertheless, the printed text stayed legible.
TZe FlexibleID
Text blurring
Tape discolouration
Laminate film separation
Tape peeling
1 cycle
5 cycles
10 cycles
20 cycles
30 cycles
Laminated
• • • • • • • •
• • • • • • • •
Laminationprovides anextra protectiveovercoat
Oil type: CASTROL synthetic coolantsA=Honilo 981B=Variocut B30C=CareCut ES1D=Iloform BWN205
E=Hysol XF=Alusol BG=Syntilo 81 EH=Syntilo 9954
The Oil Submersion and Adhesion Test Procedure
Further Tests
Brother P-touch laminated tapes were firstly attached to stainless steel plates and immersed in various oils for 2 hours at room temperature. The tapes were then wiped with a cloth soaked in each of the various oils.
During both tests, no change to the print quality occurred, and the labels remained affixed to the slides.
TZe
Standard laminated/
Extra Strength
Adhesive/Flexible ID Wiped
Immersed(2 hours)
Oil type Insoluble coolant Soluble coolant
A B C D E F G H
Laminated
Frequently Asked Questions
How accurate are the tests in simulating real-world examples?Every effort was made to ensure the tests accurately simulate real-world examples. However when tapes are used in the real-world, many factors could change the results of these tests, such as surface material, heat, moisture, pressure, chemicals etc. If in doubt, always test Brother P-touch laminated tapes in your own environment to ensure they meet your requirements.
How thick are TZe tapes?TZe tapes are around 160 micro metres in thickness, but this varies slightly by tape type.
Which colour tape is recommended for high temperatures?We recommend TZe-M931/951/961 (Black on matt silver) as most resistant to high temperatures in terms of discolouration.
When I remove the label will messy adhesive remain?How can I remove it?
Tapes can be removed from most materials with relative ease leaving littleor no adhesive on the material. Extreme heat, humidity and certain chemicals may result in some residual adhesive being left but this can be removed in most cases with Ethanol.
Which tape is recommended for cable labelling?TZe Flexible ID tape for wrap or flag labelling or HSe Heat Shrink Tube.
Do TZe tapes create any outgassing?The following gases may be produced when labels are in a hot environment such as in front of an air conditioner: toluene, n-butanol, 2-ethylhexyl alcohol, butyl carbinol acetate. These levels are however very low.
Laminationprovides anextra protectiveovercoat
Laminated
Laminationprovides anextra protectiveovercoat
Frequently Asked Questions
Can TZe tapes be submerged in alcohol?Submersion of TZe tapes in alcohol is not recommended for extended periods due to the possible deterioration of the tape adhesive.
Do TZe tapes contain silicone?Since the tape liner itself is silicone coated on both sides, there is a chance that small amounts of silicone may remain on the adhesive layer underneath the label even after the liner is peeled off.
Do TZe tapes contain latex?TZe tape uses acryl based adhesive materials and do not include latex.
Does TZe tape contain lead?There is no lead in the cassette case, tape or ink.
Can TZe tapes be used on circuit boards?We do not recommend that TZe tapes are used on circuit boards due to the sensitivity of circuit boards to dust, static electricity and acid (although these are at very low levels in TZe tapes)
Can TZe tapes be used to label food?TZe tape can be used safely on food packaging but should not be in contact with the food itself.
Can TZe tapes be used on copper?As adhesive materials used in our tape are acrylic and weakly acid we do not recommend that TZe tapes are used on copper.
Laminated
Frequently Asked Questions
How long should security tape be attached before peeling off?We recommend that TZe security tape is affixed for at least 24 hours in order to work effectively.
Do TZe tapes contain chloride?Chloride materials are used in TZe tapes (except clear or silver).
Where is the chloride contained in the TZe tape layers?It is contained in the coloured base film layer.
Do TZe tapes contain polyvinyl chloride (PVC)?There is no PVC in the cassette case, tape or ink. The colour layer of the base film includes some chlorine compound which means TZe tapes cannot be categorised as halogen-free.
Do tapes contain REACH SVHC? Please see www.brother.eu/reach for the latest information.
Do the tapes contain recycled material?TZe tapes contain at least 5% of recycled material.
Can TZe tapes be used for the marking of electrical and electronic equipment (EEE) that is covered by the RoHS Directive?TZe tapes are in conformity with the requirements of the RoHS Directive, and do not contain restricted substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) above the allowed limit values.
Laminationprovides anextra protectiveovercoat
Laminated
Frequently Asked Questions
Are TZe tapes RoHS compliant?
TZe tape cassettes themselves do not fall under the definition of EEE, but are considered as consumables and not subject to the directive requirements. However, Brother works closely with our supply chain partners and others in the industry, including material and component suppliers, to ensure the RoHS compliance for TZe tapes.
Laminationprovides anextra protectiveovercoat
1. A random sample of tape types were selected and used to perform these tests. Accordingly, results may have differed slightly, depending on the type of tape used.
2. The actual test results were acquired under specific conditions configured by Brother, with the sole aim of providing information contained within this booklet. Brother does not guarantee the strength, safety or accuracy of numerical data.
3. Since tape adherence performance is affected by the material the tape is attached to, the material’s surface condition, whether it is greasy, dusty, rough or curved, and the environmental conditions, the customer should confirm adherence performance under actual usage conditions after purchasing the tape required, and use the product under their own responsibility.
4. Brother accepts no responsibility for injuries or lost earnings resulting from application of the information contained in this document.
Notes
UL Certification
A number of our TZe tapes have been tested by Underwriters Laboratories, a renowned independent testing laboratory. Our tapes have passed their rigorous safety standards and gained UL certification and we continue to test more tapes. For latest certification details and a list of certified tapes please contact your local Brother office.
Laminated
Brother genuine supplies
Brother Genuine Supplies work in perfect harmony with Brother printers.
Designed, manufactured and tested in controlled environments by the same team of engineers as Brother hardware. Providing you with the best possible results for your business and protection of your print investment.
Baldershøj 222635 IshøjDenmarkTlf. + 45 43313131
Brother Nordic A/S
www.brother.dk
All specifications correct at the time of printing and are subject to change. Brother is a registered trademark of Brother Industries Ltd.Brand product names are registered trademarks or trademarks of their respective companies.
Kontakt: