Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
24 Madison Road | Fairfield, NJ 07004 USA — t: (973) 439-1401 f: (973) 439-1402 | www.JEEN.com — [email protected]
JEESILC® TMR-40
TECHNICAL BULLETIN
IntroductionJeesilc® TMR-40 is an excellent transfer resistance agent with excellent water and sebum repellency on the skin. It is ideal for every type of color cosmetic and skin care product where a strong film former is needed yet a soft feel is desired. Jeesilc® TMR-40 is a semi-volatile, low viscosity, and easy-to-use fluid comprised of Trimethylsiloxysilicate dissolved in Isododecane. It dries quickly and sets an invisible layer of film protection on the surface of the skin, increasing resistance to smudging, clumping, rubbing off and smearing.
Jeesilc® TMR-40 has strong dual sebum and water blocking attributes tailor made to skin care, sun care, and all color cosmetics.
When incorporated into color cosmetics, it creates a veil of comfort for extended wear products. It aids in keeping the color where you want it and, more importantly, it prevents transfer of color to where you don’t want it.
When incorporated into skin care products, it adds softness and an occlusive breathable film without ever feeling tacky or uncomfortable.
When incorporated into suncare products, it adds comfort and wear-ability while enhancing water repellency.
Terrific Transfer Resistance
KEY BENEFITS:• Transfer resistant film former• Dual sebum and water repellent• Quick drying• Good breathable long-wear ingredient• Easy to formulate with fluid
0% 12%
FORMULATING GUIDELINES:Jeesilc® TMR-40 can easily be used in O/W emulsions, W/O emulsions, and anhydrous systems. Because of its light film-forming properties and film elasticity Jeesilc® TMR-40 is ideal for use in all color cosmetic products, as well as skin care.
Jeesilc® TMR-40 contains isododecane which evaporates at higher temperatures. When using heat, we recommend use of an enclosed vessel to limit and prevent the volatilization of the isododecane. The vessel should be inert at temperatures over 30°C.
When making traditional hot process formulas, we recommend cooling down the formulations to ≤ 45°C before adding Jeesilc® TMR-40 with continuous mixing.
Recommended use levels:Skin care products: 2 - 5%Body care products: 2 - 5%Color cosmetic products: 7 - 15%
24 Madison Road | Fairfield, NJ 07004 USA — t: (973) 439-1401 f: (973) 439-1402 | www.JEEN.com — [email protected]
Typical PropertiesINCI Name Isododecane (and) TrimethylsiloxysilicateAppearance Clear to slightly hazy liquidViscosity @ 25°C 5.0 - 10.0Refractive Index 1.410 - 1.430Specific Gravity @ 25°C 0.885 - 0.895Recommended Use Level 2-15%
PRODUCT APPLICATIONS:• Lipsticks, Lipstains, Lipshines• Lip Glosses• Foundations• Mascaras• Hot Pours• Eye Liners• Eye Shadows• Skin Care Products • Sun Care Products
24 Madison Road | Fairfield, NJ 07004 USA — t: (973) 439-1401 f: (973) 439-1402 | www.JEEN.com — [email protected]
Jeesilc® Eye Lift (J38-111)Jeesilc® Eye Lift provides a soft, breathable, moisturizing, and lifting action to the eye area without compromising feel. The
effect and softness lasts for hours and hours of comfortable breathable wear.
Product Specifications:pH: 5.5-6.0 Viscosity: RV SP-TC @ 5 rpm @ 25°C: 37,000-42,000 cps Appearance/Form: White Cream
Procedure: 1 In main beaker, add Phase A ingredients mixing with propeller mixer and heat to 70-75°C. 2 Cool down Phase A to 40-45°C. 3 Add Phase B to Phase A and mix until homogeneous. 4 Cool down Phase AB to 35-40°C. 5 Add Phase C ingredients. Mix until homogeneous. 6 Cool down Phase ABC to 20-25°C. 7 Add Phase D ingredients to Phase ABC and mix until homogeneous. 8 Adjust pH to 5.50 - 6.00.
Phase Trade Name/INCI Name % Vendor Highlighted JEEN IngredientsA JEENATE® 3H,
Polyethylene
Bentone Gel IHD VFloraesters K-100 JojobaVITAMIN E USP, Tocopheryl Acetate
5.0000
10.00010.0000.2500
JEEN
JEEN
A Linear Polyethylene with a Melt Point of 69°C. Use this low melting PE to add thickness/structure to your oil phase. Jeenate 3H provides a light feel and enhanced film formation for sun care or active delivery. Ideal in any hot pour application or as a secondary structuring agent for a stick, it adds improved soft feel and ‘payout’. Small percentages can be used to enhance stability in any emulsion. A ‘Cold Process Wax’ version of this ingredient exists as Jeesperse CPW-3. Use at 0.5 -10%.
B JEESILC® PS-VHBF, Isododecane (and) Bis-vinyl Dimethicone/Dimethicone Copolymer
JEESILC® TMR-40, Isododecane (and) Trimethylsiloxysilicate
Deionized Water, Water
10.000
20.000
43.050
JEEN
JEEN
Bis-vinyl Dimethicone/Dimethicone Copolymer is a linear polymer patented by JEEN® (US Patent #7,407,666). The polymer is non-crosslinked, and provides security of knowing you’re not infringing on any patents pertaining to a Dimethicone Crosspolymer. Elegance delivered by the Bis-vinyl Dimethicone/Dimethicone Copolymer, and carried using Isododecane, this silicone gel will provide very light feeling powdery cushion. Easily added post-emulsion.Jeesilc® TMR-40 is an excellent transfer resistance agent with dual water and sebum repellency on the skin. It is ideal for every type of color cosmetic and skin care formulation where a strong film former is needed, yet a soft feel is desired.
C Boron Nitride, Boron NitrideNYLON 12, Nylon
0.25000.2500
D JEECIDE® CAP-5, Phenoxyethanol (and) Caprylyl Glycol (and) Potassium Sorbate (and) Water (and) Hexylene GlycolFragrance Lilac, Fragrance Lilac
1.0000
0.2000
JEEN
JEEN
Add this Broad Spectrum Preservative System at 0.5-1.5% in any emulsion for complete microbial protection in your formula. Paraben-Free, Formaldehyde-Free and Globally Compliant.
Jeesilc TMR-40 TB ver 1.0
Please contact your JEEN Representative or visit our website at www.JEEN.com to learn more about our products, our technologies, and how we can help you reduce your carbon footprint and produce a greener product.
JEEN International Corporation24 Madison Road | Fairfield, NJ 07004 — USA
tel: (973) 439-1401 • fax: (973) 439-1402
www.JEEN.com [email protected]