19215 Redwood Road • Cleveland, OH 44110 • 800-321-7628 www.euclidchemical.com

The Euclid Chemical Company

STANDARD FLOOR JOINT FILLING DETAILS

TECHNICAL BULLETIN CP-27

The details below comply with both American Concrete lnstitute (ACI) and Portland Cement Association

(PCA) guidelines for the installation of a semi-rigid epoxy or polyurea floor joint filler.

Saw Cut Joint Less Than 2” (50 mm) Deep Saw Cut Joint More Than 2” (50 mm Deep)

Saw Cut Construction Joint Construction Joint Not Saw Cut

1/4” (6 mm) Max.Silica Sand orNo Silica Sand

Compressible Backer Rod or Silica Sand

2” (50 mm) Min.

Silica Sand HeldBelow the Saw Cut

Compressible Backer Rod or Silica Sand

2” (50 mm) Min.