TE Connectivity Warranty/Software Handbookwalkerfirst.com/uploads/files/literature/TE Warranty Handbook.pdf · TE Connectivity Warranty/Software Handbook . Telecom and Wireless

TE Connectivity Warranty/Software Handbook Telecom and Wireless ADCP-40-005• Issue 11 Revised May, 2014

Te100389

Typewritten Text

Te100389

Typewritten Text

Te100389

Typewritten Text

Te100389

Typewritten Text

Te100389

Typewritten Text

300100103410 A

Te100389

Typewritten Text

DISCLAIMER OF LIABILITY

While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications

This publication may be verified at any time by contacting TE Connectivity’s Customer Support Centers:

Telecom - Customer Support

Contact Information:

Phone: 800.366.3891 ext: 73000 or 952-917-3000 www.te.com/telecomnetworks

Hours:

7:00 AM to 5:00 PM Central Time - Monday through Friday

Wireless Customer Support

Contact Information - Standard Support:

Phone: 1-800-530-9960 www.te.com/wirelesssupport

Hours:

8:00 AM to 5:00 PM (U.S.) – Monday through Friday

http://www.te.com/telecomnetworks

http://www.te.com/telecomnetworks

http://www.te.com/wirelesssupport

TABLE OF CONTENTS

Disclaimer Of Liability ................................................................................................................................................ 1

Product Warranty ................................................................................................................................................ 7

Software Warranty ................................................................................................................................................ 7

Ownership ................................................................................................................................................ 7

Return for Replacement ............................................................................................................................................. 7

In-Warranty Product Software .................................................................................................................................... 7

NTF (No Trouble Found) ............................................................................................................................................ 8

Post Warranty/Out of Warranty Policy ........................................................................................................................ 8

Service Affecting Advance Replacement Program ..................................................................................................... 8

Freight Responsibilities Under Warranty .................................................................................................................... 8

Return Material Authorization ..................................................................................................................................... 9

Return For Credit Process Information ......................................................................................................................... 10

Credit Return .............................................................................................................................................. 10

Obsolete/Discontinued Products .............................................................................................................................. 10

Standard Products .............................................................................................................................................. 10

Return Material Authorization ................................................................................................................................... 10

Freight Responsibilities Return for Credit ................................................................................................................. 11

Telecom Product Return Department ........................................................................................................................... 12

Wireless Product Return Department ........................................................................................................................... 12

Products And Service Limited Warranty ....................................................................................................................... 13

TE Software License General Terms ........................................................................................................................... 14

COPPER CONNECTIVITY PRODUCTS ..................................................................................................................... 15

ACCESSNET CABLE & CONNECTIVITY ........................................................................................................... 15

Active Digital Cross-Connect ......................................................................................................................... 15

Building Entrance Terminals (BETs) .............................................................................................................. 15

Central Office Copper Cable ........................................................................................................................ 15

Distribution Systems ...................................................................................................................................... 15

Indoor Distribution Cabinets ........................................................................................................................ 15

Outdoor Distribution Cabinets ........................................................................................................................ 16

Protection Systems ........................................................................................................................................ 16

Splitters .......................................................................................................................................... 16

Termination Modules (Blocks) ....................................................................................................................... 16

Accessories & Tools ...................................................................................................................................... 16

COPPER LTE PRODUCTS ................................................................................................................................. 17

Copper Connectors ........................................................................................................................................ 17

Distribution Point Terminals ........................................................................................................................... 17

Copper Closures .......................................................................................................................................... 17

Accessories .......................................................................................................................................... 17

CUSTOM TERMINATION PRODUCTS ............................................................................................................... 18

Bay, Standard .......................................................................................................................................... 18

Jackfield Patch-by-Exception ......................................................................................................................... 18

Mounting & Accessories ................................................................................................................................ 18

Panels .......................................................................................................................................... 18

Plug, Test Access .......................................................................................................................................... 18

Terminal Block .......................................................................................................................................... 18

Vertical Filler Plate ......................................................................................................................................... 18

Tools & Accessories ...................................................................................................................................... 18

DS3/STS-1 REPEATER PRODUCTS .................................................................................................................. 19

Chassis .......................................................................................................................................... 19

Module .......................................................................................................................................... 19

Extend Optical/Electrical Line Extender (Extend) .......................................................................................... 19

DSX-1 DIGITAL SIGNAL CROSS-CONNECT PRODUCTS ................................................................................ 20

Bay .......................................................................................................................................... 20

Chassis, Digital Distribution Point .................................................................................................................. 20

Card .......................................................................................................................................... 20

Panels .......................................................................................................................................... 20

Cross-Connect Wire....................................................................................................................................... 20

Accessories .......................................................................................................................................... 20

DSX-3 DIGITAL SIGNAL CROSS-CONNECT PRODUCTS ................................................................................ 21

Bay .......................................................................................................................................... 21

Cable Assemblies .......................................................................................................................................... 21

Cable, Bulk Coaxial ....................................................................................................................................... 21

Modules .......................................................................................................................................... 21

Panels .......................................................................................................................................... 21

Accessories .......................................................................................................................................... 21

TWISTED PAIR COMPONENT PRODUCTS ...................................................................................................... 22

Jack .......................................................................................................................................... 22

Jack Frame .......................................................................................................................................... 22

ADCP-40-005 Issue 11 Org. 2008, Revised 05/14 3

Jack Insert .......................................................................................................................................... 22

Jack Panel .......................................................................................................................................... 22

Module .......................................................................................................................................... 22

Panel, Longframe .......................................................................................................................................... 22

Accessories .......................................................................................................................................... 22

WIRED ASSEMBLY PRODUCTS ........................................................................................................................ 23

Jackfield .......................................................................................................................................... 23

Panel, Telephone Line Isolation ..................................................................................................................... 23

FIBER CONNECTIVITY PRODUCTS .......................................................................................................................... 24

FIBER OPTIC PANEL PRODUCTS ..................................................................................................................... 24

FL1000 (FOP) .......................................................................................................................................... 24

Panels .......................................................................................................................................... 24

FL2000 (FOP) .......................................................................................................................................... 24

FL1000 and FL2000 ................................................................................................................................... 24

Accessories .......................................................................................................................................... 24

Specialty Fiber Products (FOP) ................................................................................... 24

Fiber Panel Series (FPL and FPX) ................................................................................................................ 25

RapidFiber Panels ......................................................................................................................................... 25

Fiber Management Tray Products (FMT ........................................................................................................ 25

FMX Products (Custom) - All) ........................................................................................................................ 25

Cable Management Tray (CMT) .................................................................................................................... 26

Panels (Rack Mount) ..................................................................................................................................... 26

Fiber Cable Components (FCC) .................................................................................................................... 26

FasTerm Kits (Singlemode & Multimode) ...................................................................................................... 26

FIBER OPTIC CABINETS, HUBS, TERMINALS, FRAMES................................................................................. 27

Fiber Access Terminals (FAT) ....................................................................................................................... 27

Fiber Access & Multiport Service Terminals (FAT, MST) ............................................................................... 27

Fiber Cross-Connect Cabinets (FTX)............................................................................................................. 27

Fiber Distribution Hubs (FDH) ........................................................................................................................ 27

FDH3000 Cabinets (FD3) and Accessories ................................................................................................... 27

FDH Splitters (FPS-MPP) .............................................................................................................................. 27

Fiber Optic Enclosures (FOE) ........................................................................................................................ 27

Fiber Wall Boxes (FWB) ................................................................................................................................ 27

Indoor Rack Mount Panels/Fiber Distribution Hubs (iFDH) ............................................................................ 27

Outdoor Fiber Distribution Hubs (oFDH) ........................................................................................................ 27


Indoor & Outdoor Distribution Terminals ........................................................................................................ 27

Primary Flexibility Point (PFP) Cabinets ........................................................................................................ 27

Value Added Modules (VAM) ......................................................................................................................... 27

Monitor, Splitter, WDM, CDWM, DWDM VAM Modules ................................................................................. 27

Passive Optical Components ......................................................................................................................... 27

Fiber Optic Cables ......................................................................................................................................... 27

Accessories .......................................................................................................................................... 28

FIBERGUIDE FIBER MANAGEMENT SYSTEM PRODUCTS (FGS) .................................................................. 29

Regular FiberGuide (FGS) ............................................................................................................................. 29

Plenum FiberGuide (FGS) ............................................................................................................................. 29

OPTICAL DISTRIBUTION FRAME PRODUCTS ................................................................................................. 30

NG4, FDF, NGF, NG3, LSX, OMX, and Breakout Kits................................................................................... 30

POWER DISTRIBUTION AND PROTECTION PRODUCTS ............................................................................... 31

POWERWORX .......................................................................................................................................... 31

WIRELINE DSL TRANSPORT SYSTEMS AND PRODUCTS ............................................................................. 32

Campus and MEGABIT MODEM ................................................................................................................... 32

HIGAIN .......................................................................................................................................... 32

PatchMate Network Control ........................................................................................................................... 32

SONEPLEX .......................................................................................................................................... 32

THINMUX .......................................................................................................................................... 32

WORLDDSL .......................................................................................................................................... 32

WIRELESS SYSTEMS .............................................................................................................................................. 33

CLEARGAIN Products ................................................................................................................................... 33

FLEXWAVE Products .................................................................................................................................... 33

INTERREACH Product Portfolio .................................................................................................................... 33


INTRODUCTION

Welcome to the 2013-2014 edition of TE Connectivity (TE) Corporate Warranty/Software Handbook. Product warranty information is provided for TE’s Telecom and Wireless business units as of the issue date of this publication.

All previous editions of any TE, Tyco Electronics, or ADC Warranty/Software Handbooks or any other document defining warranties or warranty periods published by TE or its business units expire on the publication date of this Handbook. TE and its business groups retain the right to make any corrections to this handbook by the addition, removal, or change to any data without any official published or oral notification of any nature. Warranty periods stated in a formal agreement between TE and a customer shall replace the specific warranty periods stated in this Handbook for the products covered under such agreement.

Customers with product(s) and software shipped prior to the publication date of this handbook will retain the product(s) warranty in effect as of the original shipment date. Product(s) and software shipped on or after the issue date of this handbook are covered by the warranty classification as stated within the terms of this handbook.

Familiarizing yourself with the information stated below which will provide you with an understanding of TE and its business group operations:

• Warranty Process Information • Return for Credit Process Information • Material and Service Warranty Statement • Software License Terms and Conditions

Refer to the Table of Contents to obtain the page number for each product listing to locate the specific page for product warranty requirements.

TE reserves the right to correct any stated warranty period without prior notification to the customer.


TELECOM AND WIRELESS WARRANTY PROCESS INFORMATION

Product Warranty

Refer to TE Product and Service Warranty statement for terms of warranty. Product warranty periods are stated within each individual product line information sheet(s). Refer to the Table of Contents for the page numbers of product line information.

Software Warranty

Refer to your specific Software License Agreement and TE Software Warranty statement for terms of warranty. Software warranty periods are stated within each individual product line information sheet(s). Refer to the Table of Contents for the page numbers of product line information.

Ownership

Transfer of product ownership or software license rights from the original TE purchaser or from the original TE Licensee (as the case may be) (excluding VARS, Distributors, Resellers) will void all existing TE warranties of any kind. Refer to the applicable agreement or license to determine any specific exceptions to such.

Return for Replacement

The following policy applies to products returned to TE for replacement. This policy applies to all customers excluding TE's distribution return policy. Replacement products may contain reconditioned parts, but those are subject to the same specification and quality control standards applied to new materials and warranted as stated herein.

In-Warranty Product/Software

Products or Software still under warranty are replaced at no charge to customer excluding any and all third party repair houses, which are subject to replacement charges as determined by TE.

TE assumes no warranty liability with respect to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, repairs, tampering, or the negligent or improper use of product or other events which are not the fault of TE. TE warranty is not transferable to third party repair facilities. OEM equipment purchased by TE and resold will be limited to that manufactures’ warranty.

Products replaced while under warranty are warranted for the remainder of the original product warranty or for a period of ninety [90] calendar days from the date of return shipment to customer, whichever is longer.

Software media replaced while under warranty is warranted for the remainder of the original software media warranty or for a period of thirty [30] calendar days from the date of return shipment to customer, whichever is longer.

Advance Replacement: Upon request, and for an additional fee, TE can provide Advance Replacement of the faulty equipment, subject to product availability. The original faulty equipment must be returned to TE within 30 days, or TE will invoice for the price of the advance-replaced equipment. Return freight will be pre-paid and added to your invoice for the repair charges.


NTF (No Trouble Found)

Products returned and found during TE’s evaluation to meet all TE specifications can, at the discretion of TE and its business units, be assessed a processing fee for handling and evaluating the product based either on a flat fee or at a defined percentage of the product list price. Customer will be advised of any such charge with a customer purchase order required to cover any charges prior to the return of any product.

Post Warranty/Out of Warranty Policy

Products that have failed after the original product warranty period has expired are not eligible for replacement as described in "Service Affecting Advance Replacement Program" stated herein.The customer should consider the purchase of a new or refurbished product as a replacement.

Service Affecting Advance Replacement Program

If any TE or an applicable business unit product fails due to a defect covered by warranty a TE Advance Replacement Product (ARP), when available from designated inventory can be forwarded to customer to replace a defective product in an emergency situation.

The customer must contact TE or appropriate business unit product return department listed under the heading “Product Return Department Telephone Directory” to verify warranty status and request a replacement product. A purchase order number from customer will authorize shipment of the ARP. Customer will be invoiced at the product list price upon shipment of the ARP.

Customer is issued a Return Material Authorization (RMA) number for return of the defective product. To be eligible for credit, the defective product must be returned within thirty [30] calendar days from date of shipment of the ARP by TE or applicable business unit.

TE reserves the right to grant partial or no credit if the returned product is damaged from negligent, improper use, improper installation, modification, repair, operation or maintenance except as described in TE's user documentation.

Customer fully understands and agrees that ARP's are normally refurbished products; however, a new product may be used when required at the discretion of TE. Customer further agrees to acceptance of all terms of the Service Affecting Advance Replacement Program, as advised by TE, for the furnishing of any ARP by TE.

Freight Responsibilities Under Warranty

Unless otherwise provided for on a contractual relationship between the parties the customer is responsible for all freight charges on products returned to TE or any business unit. TE and the business units will be responsible for freight charges (most economical means) for replacement products being returned to customer.


Return Material Authorization

A Return Material Authorization (RMA) number is required prior to the return of any product to TE or any business unit. Failure to obtain an RMA number can result in rejection of shipment by TE and return to the customer at customer's expense.

Contact the appropriate Product Return Department listed under the heading “Product Return Department Telephone Directory” to obtain an RMA number.

Once an RMA number is issued all products must be returned to TE or the applicable business unit within thirty [30] calendar days (Domestic US) and sixty [60] calendar days (Internationally) from its issue date. If products are not received within the stated calendar day period, the RMA number is invalid and is officially cancelled. Customer must obtain a new RMA number for any cancelled RMA number.


RETURN FOR CREDIT PROCESS INFORMATION

Credit Return

Products are allowed to be returned for credit under specific conditions identified below. Before TE or any business unit will accept a return for credit, customer is required to contact TE or applicable business unit Product Return Administrator to discuss the circumstances covering the need for product return. The minimum factors used in the evaluation of product eligibility for credit are as follows:

Custom/Nonstandard Products

Represents products, which are either: (A) designed and built to a customer specification or customer defined requirements and/or (B) the use of a TE or business unit standard product and modified to meet customer specified parameters. These products are not eligible for return or for credit.

Obsolete/Discontinued Products

Represents any TE or business unit product defined as obsolete or which has been discontinued from any further sale. These products are not eligible for return or for credit.

Standard Products

Represents products which are defined within a TE or business unit published catalog of the latest edition. Standard products are eligible for return and must be unused and meet current TE or applicable business unit specifications (form, fit and function), and not missing hardware packs, manuals, etc. These products are eligible for return or for credit.

Products must be returned within a six [6] calendar month period or less from TE's original ship date and be accepted by TE or the applicable business unit for further use. Customer's account will be credited for accepted products based on the following criteria: one hundred percent [100%] of purchase price if return is found to be the result of a TE or business unit error; or eighty percent [80%] of purchase price if return is the result of a customer error.

Products returned in an unused but "incomplete" status (missing hardware, manuals, prints, etc.), will be assessed a restock charge. This "incomplete" return charge is in addition to any other applicable restock charge.

Return Material Authorization

A Return Material Authorization (RMA) number is required prior to the return of any Product to TE or any business unit. Failure to obtain an RMA number can result in rejection of shipment by TE and return to the customer at customer's expense.

Contact the appropriate Product Return Department listed under the heading “Product Return Department Telephone Directory” to obtain an RMA number.

Once an RMA number is issued all products must be returned to TE or the applicable business unit within thirty [30] calendar days (Domestic US) and sixty [60] calendar days (Internationally) from its issue date. If products are not received within the stated calendar day period, the RMA number is invalid and is officially cancelled. Customer must obtain a new RMA number for any cancelled RMA number.


Freight Responsibilities Return for Credit

Customer is responsible for all freight charges on all products being returned for credit. All shipments made to TE or any business unit by customer shall be made DDP (Delivered Duty Paid). Customer is responsible for all transportation, custom, duty and process costs if products are not returned in accordance with instructions stated herein. TE and any business unit may also impose a handling and process fee as a result of products not shipped DDP.


TELECOM PRODUCT RETURN DEPARTMENT

Customer Support Contacts

United States

TE Connectivity 1187 Park Place Shakopee, Minnesota 55435 United States Toll Free Telephone: 1-800-366-3891, Extension 73748 Telephone: 952-917-3748 Email: [email protected]

Canada

TE Connectivity 1187 Park Place Shakopee, Minnesota 55435 United States Telephone: 1-800-366-3891, Extension 29210 Email: [email protected]

Mexico

Torre Esmeralda III Blvd Manuel Avila Camacho 32-502 Col Lomas de Chapultepec Miguel Hidalgo, DF CP 11000 México Telephone: +52 55 5322-2900 tel Fax: +52 55 5322-2902 fax Email: [email protected]

WIRELESS PRODUCT RETURN DEPARTMENT

Customer Support Contact

TE Connectivity 541 E. Trimble Road San Jose, CA 95131-1224

Toll Free Telephone: 1-800-530-9960 Web Link: http://www.te.com/WirelessSupport


mailto:[email protected]


http://www.te.com/WirelessSupport

PRODUCTS AND SERVICE LIMITED WARRANTY

a) Except as otherwise stated herein or in an order acknowledgment delivered to Customer, TE warrants to Customer that the Products (1) shall be free of defects in materials and workmanship for the periods set forth in this Warranty Handbook (each a “Warranty Period”) from date of shipment to Customer; and (2) shall be free of liens and encumbrances when shipped to Customer. If TE agrees in writing to provide and does provide system design, drawings, technical advice, or any other services to Customer in connection with Products, then TE further warrants to Customer during the applicable Warranty Period that such services shall be undertaken in accordance with TE’s reasonable technical judgment based on TE’s understanding of pertinent technical data as of the date of performance of such services. TE’s warranties will not apply to any Product with respect to which there has been (i) improper installation or testing, (ii) failure to provide a suitable operating environment, (iii) use of the Product for purposes other than that for which it was designed, (iv) failure to monitor or operate the Product in accordance with applicable TE specifications and good industry practice, (v) unauthorized attachment or removal or alteration of any part of the Product, (vi) unusual mechanical, physical or electrical stress, including but not limited to lightning strikes (such Products as fuses, breakers, gas tubes, etc. shall not be considered defective if they function as per their specification (vii) modifications or repairs done by other than TE, (viii) mishandling during shipment of the Product; or (ix)any other abuse, misuse, neglect or accident. In no circumstance shall TE have any liability or obligation with respect to expenses, liabilities or losses associated with the installation or removal of any Product or the installation or removal of any components for inspection, testing or redesign occasioned by any defect or by repair or replacement of a Product. Application Equipment, spare parts and hand tools ordered or supplied hereunder may contain used parts and/or be reconditioned.

(b) Customer shall notify TE in writing promptly (and in no case later than thirty (30) calendar days after discovery) of the failure of any Product to conform to the warranty set forth above, shall describe in commercially reasonable detail in such notice the symptoms associated with such failure, and shall provide to TE the opportunity to inspect such Products as installed, if possible. The notice must be received by TE during the Warranty Period for such Product. Unless otherwise directed in writing by TE, within thirty (30) calendar days after submitting such notice, Customer shall package the allegedly defective Product in its original shipping carton(s) or a functional equivalent and shall ship it to TE.

(c) Within a reasonable time after receipt of the allegedly defective Products and verification by TE that the Products fail to meet the warranty set forth above, TE shall correct such failure by, at TE’s option, either (i) modifying the Products or (ii) replacing the Products. Such modification, replacement, and the return shipment of the Products with minimum insurance to Customer shall be at TE’s expense. Customer shall bear the risk of loss or damage in transit, and may insure the Products. Customer shall reimburse TE for transportation costs incurred for Products returned but found by TE not to be defective. Modification or repair of Products may, at TE’s option, take place either at TE’s facilities or at Customer’s premises. If TE is unable to modify Products to conform to the warranty set forth above, then TE shall, at TE’s option, either refund to Customer or credit to Customer’s account the purchase price of the Products less depreciation calculated on a straight-line basis over TE’s stated Warranty Period. THESE REMEDIES SHALL BE CUSTOMER’S EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY.

(d) EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE, TE MAKES NO OTHER REPRESENTATIONS, OR WARRANTIES, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, REGARDING THE PRODUCTS, THEIR FITNESS FOR ANY PURPOSE, THEIR QUALITY, THEIR MERCHANTABILITY, THEIR NONINFRINGEMENT, OR OTHERWISE. NO EMPLOYEE OF TE OR ANY OTHER PARTY IS AUTHORIZED TO MAKE ANY OTHER REPRESENTATIONS, WARRANTIES, OR CONDITIONS FOR THE GOODS OTHER THAN THE WARRANTY SET FORTH HEREIN. TE’S LIABILITY UNDER THE WARRANTY SHALL BE LIMITED TO A REFUND OF THE PURCHASE PRICE OF THE PRODUCT. IN NO EVENT SHALL TE BE LIABLE FOR THE COST OF PROCUREMENT OR


INSTALLATION OF SUBSTITUTE GOODS BY CUSTOMER OR FOR ANY SPECIAL, CONSEQUENTIAL, INDIRECT OR INCIDENTAL DAMAGES OF ANY KIND WHATSOEVER, OR CLAIMS OF ANY THIRD PARTIES.

(e) Customer assumes the risk and agrees to indemnify TE against and hold TE harmless from all liability relating to (i) assessing the suitability for Customer’s intended use of the Products and of any system design or drawing and (ii) determining the compliance of Customer’s use of the Products with applicable laws, regulations, codes and standards. Customer retains and accepts full responsibility for all warranty and other claims relating to, or arising from, Customer’s products which include or incorporate Products or components manufactured or supplied by TE. Customer is solely responsible for any and all representations and warranties regarding the products made or authorized by Customer. Customer will indemnify TE and hold TE harmless from any liability, claims, loss, cost or expenses (including reasonable legal fees) attributable to Customer’s products or representations or warranties concerning same.

TE SOFTWARE LICENSE GENERAL TERMS

IMPORTANT, READ CAREFULLY

The software license which accompanies the software or product is a legal agreement between TE (including its affiliates) (“TE”) and Customer for, TE software (“TE Software”) and/or third-party software (“Third-Party Software”) (hereinafter referred to collectively as “Software Product”). The complete details of such software license including the limitation of warranty shall be defined in the software license.

BY OPENING ANY SOFTWARE PACKAGE OR THE SOFTWARE ASSOCIATED PRINTED MATERIALS CONTAINING THE SOFTWARE LICENSE, CUSTOMER AGREES TO BE BOUND BY THE TERMS STATED THEREIN.


TELECOM PRODUCT WARRANTIES

Copper Connectivity Products

AccessNet CABLE & CONNECTIVITY

Buzzwords: BETs, IDC (INSULATION Displacement Contact), Block, Module, Cross-Connect Cabinet, x-box, cross-box, DDF, DSL Splitter, lightning protection, terminals

Products Warranty Classification

Active Digital Cross-Connect 1 Year

ADX100, ADX200, ADX201, Accessories

Building Entrance Terminals (BETs) 1 Year* High Density Wall/Rack Mount, Indoor & Outdoor Enclosed (5-Pin, Magazine, Single-Pair COMPROTECT)

Central Office Copper Cable 1 Year DS1, Switchboard, Frame Wire/Cross-Connect wire, specialty

Distribution Systems 1 Year Digital Signal Distributor, Modular Distribution Cabinet, Interconnection Point Cabinet, Main Distribution Frame – 91M, COM Series, 71, 80 Other Wall-Mounted Distribution Racks

Indoor Distribution Cabinets 1 Year Telecommunications Distribution Cabinets, Steel and Plastic Distribution Boxes

*These products shall not be considered defective and the foregoing limited warranties shall not apply to such products where the fail-safe mechanism is activated in accordance with TE’s written specifications; or if the product has other signs of damage due to exposure of excessive voltage and/or electrical current while properly performing per TE’s specifications.



Copper Connectivity Products AccessNET CABLE & CONNECTIVITY, Continued


Outdoor Distribution Cabinets 1 Year Compact Distribution up to 200 pairs, Cross-Connect Cabinets – 59, 82, 92, 83 with Plinth, Plinth 1060 with Accessories, Multi-functional Unicab-Vario, NCX FTTN Delivery Cabinets

Protection Systems 1 Year* COMPROTECT and Magazine Overvoltage protection for LSA-PLUS & LSA PROFIL, LSA-PLUS & LSA PROFIL NT, Series 2, HIGHBAND 10, Main Distribution Frame 71

Splitters 1 Year BroadWire Plus Splitter Cards, Module Housings, Splitters, others

Termination Modules (Blocks) 1 Year LSA-PLUS & LSA PROFIL NT, LSA-PLUS Series 10, LSA-PLUS & LSA PROFIL Series 2, Edge Connectors, High Density Cable Head, Series 2 25-& 50-Pair 89D, Style Blocks, PCB-PLUS, 75/120 Balun single/panel, DIN modules,

Accessories & Tools 1 Year Dust Covers, Mounting Frames, Back-mount Frames, Rod Mount Brackets, Support Bars, Jumper Ring Bars, Marking Caps, Disconnect and Dummy Plugs, Insertion Tool, Field Termination Kits, Pre-terminated Assemblies, Test Cords, Test Devices, Patch Cords

*These products shall not be considered defective and the foregoing limited warranties shall not apply to such products where the fail-safe mechanism is activated in accordance with TE’s written specifications; or if the product has other signs of damage due to exposure of excessive voltage and/or electrical current while properly performing per TE’s specifications.



Copper Connectivity Products COPPER LTE PRODUCTS

Buzzwords: Connectors, Terminals, Blocks, Closures


Copper Connectors 1 Year

AMP-Stack Connectors PICABOND Cable Splice TEL-Splice Telephone Cable Connectors

Distribution Point Terminals 1 Year C5C (Digital Transmission Connector) DTerminator 2 (All) DTerminator 3 (All) DTS Terminal Block CST Terminal Closure Mini CST Terminal Closure Quiet Front Cross-Connect Terminals and Modules Commoning Blocks Dataterm In-Line Bunching Blocks VX DataGuard Gel Sealed Cross Connect Module

Copper Closures

XAGA 550/550L Splice Closures 10 Years XAGA 1000 Splice Closures 10 Years XAGA 1650 Splice Closures 10 Years FGST Gel Sealed Closure 3 Years GS3 1650 Gel Sealed Splice Closure 1 Year CERTI-SEAL Coax Coupling Closure 10 Years CERTI-SEAL Buried and Aerial Service Wire Closures 10 Years TRAC Closures 1 Year PBSS (Pressure Blocking System Sleeve) 10 Years TPBS (Tubular Pressure Blocking System) 10 Years GSIC Closure 3 Years Mechanical Joint Closure 1 Year End Caps 1 Year

Accessories

WRSS Wraparound Repair Sleeve 10 Years TDUX Inflatable Duct Seal for Cable Ducts 1 Year GelGuard Sealant 1 Year



Copper Connectivity Products CUSTOM TERMINATION PRODUCTS


Bay, Standard QCP Connectorized or Non-Connectorized 1 Year

Jackfield Patch-by-Exception 1 Year Mounting & Accessories 90 Days

Bracket, Mounting, Adjustable or Swivel; Bridging Clip, Cable Connector, Connectorized Cable, Cover, Snap-on Protective Kit, Contact Replacement

Panels 1 Year

Plug, Test Access 1 Year

Terminal Block Connectorized; Molded or Wrapped 1 Year

Vertical Filler Plate 1 Year Tools & Accessories 90 Days

Rack Mounting Bar, Vertical or Horizontal, Wire Wrap Replacement Pin, Replacement Impact Tool Tip, Tool Holder, Tool Wire Insertion



Copper Connectivity Products DS3/STS-1 REPEATER PRODUCTS

Buzzwords: DS3 Repeater Modules. Repeater Cards, Intra-office Repeaters, Extend Line Extender, Optical to Electrical, O/E Converter


Chassis 1 Year DS3 Portable Bridging Office Amplifier DS3/STS-1 Portable Repeater DS3/STS-1 Rack Mount Repeater

Module 1 Year DS3 Dual Bridging Office Amplifier DS3 Single Bridging Office Repeater DS3/STS-1 Bridging Office Repeater, Dual or Protected DS3/STS-1 Intra-Office Repeater, Single or Dual DS3/STS-1 Intra-Office Repeater, Protected or DSX

Extend Optical/Electrical Line Extender (Extend) 1 Year



Copper Connectivity Products DSX-1 DIGITAL SIGNAL CROSS-CONNECT PRODUCTS


Bay 5 Years Modular Drop-In High Density

Chassis, Digital Distribution Point 5 Years

Card 5 Years Digital Distribution Point Jack, Loopback, Opening, Terminating

Panels 5 Years DSX-1 Front Cross Connect or Rear Cross-Connect

Cross-Connect Wire 90 Days Accessories 1 Year

Cross Aisle, DSX-1 Interbay, DSX-1 Bantam or Longframe Ring, DSX-1 Horizontal Jackfield, Replacement Jack Kit Cable, Cable Trays



Copper Connectivity Products DSX-3 DIGITAL SIGNAL CROSS-CONNECT PRODUCTS


Bay 5 Years

DSX-3 Front or Rear Cross-Connect Cable Assemblies 1 Year

Cross-Connect, Patch Cords

Cable, Bulk Coaxial 90 Days Modules 5 Years

DSX-3 Front or Rear Cross-Connect Panels 5 Years

Cross Aisle, Inter Bay, Front Cross-Connect, Standard or Midsize (Non-Modular)

Accessories 1 Year

Plugs, Tools, Bay Tracer



Copper Connectivity Products TWISTED PAIR COMPONENT PRODUCTS


Jack 1 Year

Bantam or Longframe; Single or Dual

Jack Frame 1 Year

Back-to-Back, Bantam, Module 2+1 or Single Bantam

Jack Insert 1 Year Jack Panel 1 Year

Bantam or Longframe Single Assemblies or Twin Assemblies

Module 1 Year

Bantam or Longframe Panel, Longframe 1 Year Accessories 1 Year

Patch Cord, Plug, Printed Circuit Board Jack Cover Socket, LED; Bantam or Longframe



Copper Connectivity Products WIRED ASSEMBLY PRODUCTS


Jackfield 5 Years

Bantam Connectorized, Longframe, Connectorized Miscellaneous or Prewired; Customer Premise (CPE), Digital, QCP, Timing, Bantam or Longframe, Voice Frequency

Panel, Telephone Line Isolation 1 Year



Fiber Connectivity Products

FIBER OPTIC PANELPRODUCTS


FL1000 (FOP) Panels 1 Year Empty and Loaded - Wall Mount, Rack Mount FL2000 (FOP)

Panels 1 Year

Empty and Loaded Mount Bays (Empty)

Rack, End Guard, Interbay Management Panel, Lower Cable Trough FL1000 and FL2000 Panels with Intrafacility Fiber Cable (IFC) and Outside 1 Year Plant (OSP) cable-FL1000 Wall Mount, FL2000 Rack Mount 6paks 1 Year Adapter only, Adapter with Pigtails Splice Trays 1 Year Accessories 1 Year Compression Fitting, Radius Limiters, Cable Clamp, Strength Member Tie-off Kit, NEMA Box Access Tool Bonding Grounding Kit, Lock and Key Type A or B Mounting Hardware, Lower Cable Trough, Blank Plates, Bonding/Grounding Kit, Cable Clamp Kit, Dust Guards Specialty Fiber Products (FOP) P*

* Product Management Specified

Contact [email protected], 800-366-3891 ext 73748 for assistance





FIBER OPTIC PANEL PRODUCTS (Continued)


Fiber Panel Series (FPL and FPX) 1 Year

Termination and Termination/Splice Panels (Rack mounts) Adapter only, Adapter with Pigtails Loaded with Intrafacility Fiber Cable (IFC) and Outside Plant (OSP) Cable

Splice Panels and Storage Panels

Accessories Splice Panels and Storage Panels

Splice trays, Locks, Grommets, Cable Clamps, Compression Fitting

RapidFiber Panels 1 Year Fiber Management Tray Products (FMT) 1 Year Drawers (All) Trays

Termination, Splice, Storage, Termination/Splice, Termination/Storage

Accessories

Wall Mount Kit, Cable Clamp Kit FMX Products (Custom) - All 1 Year




FIBER OPTIC PANEL PRODUCTS (Continued)


Cable Management Tray (CMT) 1 Year

Panels (Rack Mount)

Termination/Storage/Splice Empty, Loaded with Adapters Only Loaded with Pigtails Termination/Storage, Empty, Adapters Only, Loaded with IFC/OSP cable Splice and Pigtail Storage

Accessories Splice Trays, Bulkhead Plates with adapters and pigtails, Cable Clamp, Mounting Hardware

Bays, Empty End Guard, Lower Cable Trough, Rack

Fiber Cable Components (FCC) 1 Year Patchcords (Singlemode & Multimode)

Simplex and Dual, 4 – 12 fiber, TRACERLIGHT, Adjustable Optical Attenuator

Cable Assemblies (Singlemode & Multimode) Stranded or Ribbon IFC/OSP

FasTerm Kits (Singlemode & Multimode) 1 Year Tool Kits, Connectors, Consumable Kit Accessory,

Other Accessories

Accessories Attenuators, Adapters, Cleaning Kits




FIBER OPTIC CABINETS, HUBS, TERMINALS, FRAMES


Fiber Access Terminals (FAT) 1 Year Fiber Access & Multiport Service Terminals (FAT, MST) Fiber Cross-Connect Cabinets (FTX) 1 Year

Fiber Distribution Hubs (FDH) 1 Year FDH3000 Cabinets (FD3) and Accessories 1 Year FDH Splitters (FPS-MPP) 1 Year Legacy FDH Cabinets (ACE) and Splitters (OCM) FDH Accessories

Fiber Optic Enclosures (FOE) 1 Year Fiber Wall Boxes (FWB) 1 Year Indoor Rack Mount Panels/Fiber Distribution Hubs (iFDH) 1 Year

Outdoor Fiber Distribution Hubs (oFDH) 1 Year

Indoor & Outdoor Distribution Terminals 1 Year FDT, TIC, OIC, RDT, OFDT

Primary Flexibility Point (PFP) Cabinets 1 Year PFP Accessories Value Added Modules (VAM) 1 Year Monitor, Splitter, WDM, CDWM, DWDM VAM Modules

VAM Chassis Passive Optical Components 1 Year Field Installable Splitters, WDMs, CWDMs, and DWDMs FOSC Tray Module Splitters, WDMs, CWDMs, and DWDMs OCMx Module Splitters, WDMs, CWDMs, and DWDMs, FPS-OCM Chassis Fiber Optic Cables 1 Year Indoor Connectorized Drop Cables – Plenum Indoor/Outdoor Connectorized Drop Cables Fiber Hardened Drop Cables (FHD/FHC)




FIBER OPTIC CABINETS, HUBS, TERMINALS, FRAMES, Cont.


Accessories

Jackmoon Plugs and Couplers 1 Year

TDUX Duct Plugs 1 Year

TCS2 Heat Shrink Tubing 90 Days




FIBERGUIDE FIBER MANAGEMENT SYSTEM PRODUCTS (FGS)


Regular FiberGuide (FGS) 1 Year All Products

Plenum FiberGuide (FGS) 1 Year All Products




OPTICAL DISTRIBUTION FRAME PRODUCTS


NG4, FDF, NGF, NG3, LSX, OMX, and Breakout Kits

Frames 1 Year

Empty, Loaded with Adapter-Only panels, Loaded with Pigtails and Splice Modules

Modules, Panels & Blocks 1 Year

Adapter Only, Loaded with IFC/OSP, Loaded with Pigtails, Splice, Storage, VAM Chassis – Termination/Splice, 12-Pack Assembly Accessory, Adapter Packs

Accessories and Hardware 1 Year




POWER DISTRIBUTION AND PROTECTION PRODUCTS


POWERWORX 5 years Fuse Panels, Breaker Panels, Baffles, Modules, and Accessories




WIRELINE DSL TRANSPORT SYSTEMS AND PRODUCTS


Campus and MEGABIT MODEM 1 Year

HDSL and G.SHDSL Chassis, Line Units Desktop Unit, Network Interface Module, Modem, Management Unit, and Accessories

HIGAIN 1 Year HDSL, HDSL2, and HDSL4 Chassis, Panel, Central Office Line Unit, Remote Unit, Line Termination Unit, Modules, Repeater, Doubler, MUX Card, Management Unit, Systems Fan Module*, SNMP and Element Management Software, Enclosures, Housings, and Accessories, PatchMate Network Control 1 Year

Chassis, Module, Adapter, Board, Cable, Connector, Module, Modular, Backplane, Modular Plug, and Accessories

SONEPLEX 1 Year Radiator, Encaser, Enclosure, Housing, and Accessories

THINMUX 1 Year DS3/M13 MUX Chassis, Fan Module*, and MUX Card WORLDDSL 1 Year

HDSL and G.SHDSL Chassis, Managed Shelf, Line Interface Unit, Universal Termination Unit, Line Card, STR-C, STR-U, Doubler Desk Top Unit, Exchange Management, Unit, Enclosure, Housing, Adaptors, and Accessories,

*NOTE: Fans and Chassis/Shelves with Fans must have their Filters changed on a regular basis so that air flow is not restricted or otherwise the warranty Chassis/Shelf, Fan, and any cards in that chassis/shelf are voided.



Wireless Systems

WIRELESS SYSTEMS


CLEARGAIN Products 2 Years TMA (Tower Mounted Amplifier) PDU (Power Distribution Unit) Bias-T FLEXWAVE Products 2 Years PRISM INTERREACH Product Portfolio 2 Years UNISON FUSION SPECTRUM


Index

AccessNet

Accessories & Tools ..................... 16

Active Digital Cross-Connect ........ 15

Building Entrance Terminals ......... 15

Central Office Copper Cable ......... 15

Distribution Systems ..................... 15

Indoor Distribution Cabinets .......... 15

Outdoor Distribution Cabinets ....... 16

Protection Systems ....................... 16

Splitters ........................................ 16

Termination Modules (Blocks)....... 16

Accessories

Cable, Cable Trays ....................... 20

Cross Aisle, DSX-1 ....................... 20

GelGuard Sealant ......................... 17

Interbay, DSX-1 Bantam or Longframe .......................... 20

Jackfield, Replacement Jack Kit ... 20

Jackmoon Plugs and Couplers ..... 28

Patch Cord, Plug, Printed Circuit Board, Jack Cover .............. 22

Ring, DSX-1 Horizontal ................. 20

Socket, LED ................................. 22

TCS2 Heat Shrink Tubing ............. 28

TDUX Duct Plugs ......................... 28

TDUX Inflatable Duct Seal for Cable Ducts ................................. 17

WRSS Wraparound Repair Sleeve17

Active Digital Cross-Connect

ADX100, ADX200, ADX201, Accessories........................ 15

Cable Assemblies

Cross-Connect, Patch Cords ........ 21

Cable Management Tray (CMT)

Accessories) ................................. 26

Bays, Empty .................................. 26

Panels (Rack Mount) .................... 26

Card

Digital Distribution Point ................ 20

Jack 20

Chassis

DS3 Portable Bridging Office Amplifier ........................................... 19

DS3/STS-1 Portable Repeater ...... 19

DS3/STS-1 Rack Mount Repeater 19

CLEARGAIN

Bias-T 33

PDU 33

TMA 33

Copper Closures

CERTI-SEAL Buried and Aerial Service Wire Closures ........ 17

CERTI-SEAL Coax Coupling Closure ........................................... 17

End Caps ...................................... 17

FGST Gel Sealed Closure............. 17

GS3 1650 Gel Sealed Splice Closure ........................................... 17

GSIC Closure ................................ 17

Mechanical Joint Closure .............. 17

Pressure Blocking System Sleeve (PBSS) ............................... 17

TPBS (Tubular Pressure Blocking System) .............................. 17

TRAC Closures ............................. 17

XAGA 1000 Splice Closures ......... 17

XAGA 1650 Splice Closures ......... 17

XAGA 550/550L Splice Closures... 17

Copper Connectivity Products 15

AccessNet .................................... 15

Copper LTE Products ................... 17

Custom Termination Products ...... 18

DS3/STS-1 Repeater Products ..... 19

DSX-1 Digital Signal Cross Connect Products ............................ 20

DSX-3 Digital Cross Connect Products ............................ 21

Twisted Pair Component Products 22

Wired Assembly Products ............ 23

Copper Connectors

AMP-Stack Connectors ................ 17

PICABOND Cable Splice .............. 17

TEL-Splice Telephone Cable ........ 17

Copper LTE Products

Accessories .................................. 17

Copper Closures .......................... 17

Copper Connectors ...................... 17

Distribution Point Terminals .......... 17

Custom Termination Products

Bay, Standard QCP ...................... 18

Jackfield Patch-by-Exception ........ 18

Mounting & Accessories ............... 18

Panels .......................................... 18

Plug, Test Access......................... 18

Terminal Block ............................. 18

Tools & Accessories ..................... 18

Vertical Filler Plate ....................... 18

Digital Point Terminals

C5C 17

Digital Signal Cross Connect Products

Accessories .................................. 20


Accessories Plugs, Tools, Bay, Tracer .......................................... 21

Bay DSX-3 Front or Rear Cross-Connect ............................. 21

Cable Assemblies ......................... 21

Cable, Bulk Coaxial ...................... 21

Cross-Connect Wire ..................... 20

Modules DSX-3 Front or Rear Cross Connect ............................. 21

Panels .......................................... 21

Distribution Point Terminals

Commoning Blocks ....................... 17

CST Terminal Closure .................. 17

DataGuard Gel Sealed Cross Connect Module ............................... 17

Dataterm In-Line Bunching Blocks 17

DTerminators ................................ 17

DTS Terminal Block ...................... 17

Mini CST Terminal Closure ........... 17

Quiet Front Cross-Connect Terminals and Modules ...................... 17

VX .......................................... 17

DS3/STS-1 Repeater Products

Chassis ........................................ 19

Extend Optical/Electrical Line Extender ............................ 19

Module ......................................... 19

DSX-1 Digital Signal Cross Connect Products

Bay 20

Card 20

Chassis ........................................ 20

Panels .......................................... 20

Fiber Cable Components (FCC)

Accessories .................................. 26

Cable Assemblies ......................... 26

FasTerm Kits ................................ 26

Patchcords ................................... 26


Fiber Optic Cabinets, Hubs, Terminals, Frames ............. 27

Fiber Optic Panel Products ........... 24

FiberGuide Fiber Management Products (FGS) .................. 29

Optical Distribution Frame Products30

Power Distribution and Protection Products ............................. 31

Fiber Management Tray Products (FMT)

Accessories .................................. 25

Drawers ........................................ 25

Trays ........................................... 25

Fiber Optic Cabinets, Hubs, Terminals, Frames

Accessories .................................. 28

FDH Splitters (FPS-MPP) ............. 27

FDH3000 Cabinets (FD3) and Accessories) ....................... 27

Fiber Access Terminals (FAT ........ 27

Fiber Distribution Hubs (FDH)) ...... 27

Fiber Optic Cables ........................ 27

Fiber Optic Enclosures) ................. 27

Fiber Wall Boxes (FWB) ................ 27

Indoor & Outdoor Distribution Terminals (FDT, TIC, OIC, RDT, OFDT) ....................... 27

Indoor Rack Mount Panels/Fiber Distribution Hubs (iFDH) ..... 27

Outdoor Fiber Distribution Hubs (oFDH) ............................... 27

Passive Optical Components ........ 27

Primary Flexibility Point (PFP) Cabinets ............................. 27

Value Added Modules (VAM) ........ 27

Fiber Optic Cabinets, Hubs, Terminals, Frames Fiber Cross Connect Cabinets) 27

Fiber Optic Cables

Fiber Hardened Drop Cables ........ 27

Indoor Connectorized Drop Cable - Plenum .............................. 27

Indoor/Outdoor Connectorized Drop Cables ............................... 27

Fiber Optic Panel Products

Accessories .................................. 24

Cable Management Tray (CMT) ... 26

Fiber Cable Components (FCC) ... 26

Fiber Management Tray Products (FMT) ................................. 25

Fiber Panel Series (FPL and FPX) 25

FL1000 (FOP) .............................. 24

FL1000 and FL2000 ..................... 24

FL2000 (FOP) .............................. 24

FMX Products (Custom) ............... 25

RapidFiber Panels ........................ 25

Specialty Fiber Products ............... 24

Fiber Panel Series (FPL and FPX)

Accessories .................................. 25

Splice Panels and Storage Panels)25

Termination and Termination/Splice Panels (Rack mounts) ........ 25

FiberGuide Fiber Management System Products

Plenum FiberGuide (FGS) ............ 29

Regular FiberGuide (FGS) ........... 29

FL1000 (FOP)

Panels .......................................... 24

FL1000 and FL2000

6paks, Adapters ........................... 24

Panels with IFC and OSP Cables . 24

Splice Trays ................................. 24

FL2000 (FOP)

Bays .......................................... 24

Panels .......................................... 24


Flexwave Products

Prism .......................................... 33

HIGAIN

Enclosures, Housings, and Accessories........................ 32

HDSL, HDSL2, and HDSL4 Chassis, Panel, Line Units, Modules . 32

Repeater, Doubler, MUX Card, Mgmt. Unit, Systems, Fan Module 32

SNMP and Element Management Software ............................. 32

INTERREACH Product Portfolio

FUSION ........................................ 33

SPECTRUM ................................. 33

UNISON ....................................... 33

Module

DS3 Dual Bridging Office Amplifier 19

DS3 Single Bridge Office Repeater19

DS3/STS-1 Bridging Office Repeater .......................................... 19

DS3/STS-1 Intra-Office Repeaters 19

Mounting & Accessories

Bracket, Mounting, Bridging Clip ... 18

Cable Connector, Conn. Cable ..... 18

Cover, Protective Kit, Contact Replacement ...................... 18

NG4, FDF, NGF, NG3, LSX, OMX

Accessories & Hardware............... 30

Frames ......................................... 30

Modules, Panels & Blocks ............ 30

ODF

NG4, FDF, NGF, NG3, LSX, OMX 30

Outdoor Distribution Cabinets

Compact Distribution, Cross Connect Cabinets, Accessories ........ 16

Multi-functional Unicab-Vario, NCX-FTTN Deliver Cabinets ....... 16

Panels

Cross Aisle, Inter Bay, Front Cross-Connect .............................. 21

DSX-1 Front or Rear Cross Connect ........................................... 20

Passive Optical Components

Field installable Splitters, WDMs, CWDMs, and DWDMs ........ 27

FOSC tray module splitters, WDMs, CWDMs, and DWDMs ........ 27

FPS-OCM Chassis ........................ 27

OCMx module splitters, WDMs, CWDMs, and DWDMs ........ 27

PatchMate Network Control

Chassis, Module, Adapter, Board, Cable, Connector ............... 32

Module, Modular, Backplane, Modular Plug, and Accessories ........ 32

Power Distribution and Protection

POWERWORX ............................. 31

Product Return Department

Telecom ........................................ 12

Wireless ........................................ 12

Protection Systems

COMPROTECT and Magazine Overvoltage Protection ....... 16

SONEPLEX

Radiator, Encaser, Enclosure, Housing, and Accessories .. 32

Splitters

BroadWire Plus Splitter Cards, Module Housing, Splitters ... 16

Termination Modules

Edge Connectors, HD Cable Head 16

LSA-PLUS & LSA PROFIL ............ 16

Style Blocks, PCB-PLUS, DIN modules ............................. 16

THINMUX

DS3/M13 MUX Chassis, Fan Module*, and MUX Card ................... 32

Tools & Accessories

Rack Mounting Bar ....................... 18

Replacement Pin, Impact Tool Tip, Holder, Tool Wire Insertion 18

Twisted Pair Component Accessories 22

Twisted Pair Component Panel, Longframe 22

Twisted Pair Component Products

Jack .......................................... 22

Jack Frame .................................. 22

Jack Insert .................................... 22

Jack Panel ................................... 22

Module ......................................... 22

Value Added Modules (VAM)

Monitor, Splitter, WDM, CDWM, DWDM, VAM Modules ....... 27

VAM Chassis ................................ 27

Warranty Process

Products and Service Limited Warranty ............................ 13

Return for Credit ........................... 10

Return Material Authorization ......... 9

Software License Gen. Terms ...... 14

Wired Assembly Products

Jackfield ....................................... 23

Panel, Telephone Line Isolation ... 23

Wireless Systems

CLEARGAIN Products.................. 33

FLEXWAVE Products ................... 33

Wireline DSL Transport Systems and Products 32


Wireline Products

Campus and MEGABIT MODEM .. 32

HDSL and G.SHDSL Chassis, Line Units Desktop Unit, Network32

HIGAIN ......................................... 32

Interface Module, Modem, Management Unit ............... 32

PatchMate Network Control .......... 32

SONEPLEX .................................. 32

THINMUX ..................................... 32

WORLDDSL ................................. 32

WORLDDSL

Enclosure, Housing, Adaptors, and Accessories ........................ 32

HDSL and G.SHDSL Chassis, Managed Shelf, Line Interface Unit .................................... 32

Universal Termination Unit, Line Card .......................................... 32


Contact us:

P.O. Box 1101 Minneapolis, Minnesota USA 55440-1101 Tel: 1-800-366-3891 Fax: 1-952-917-3237

www.te.com

AccessNET, AMP, BroadWire PLUS, C5C, CERTI-SEAL,CLEARGAIN, CST, COMPROTECT, DataGuard, DTerminator 2, FIBERGUIDE, FOSC, GelGuard, GS3, HIGHBAND, HIGAIN, INTERREACH, Jackmoon, LMX, LSA-PLUS, LSA-PROFIL, MEGABIT MODEM, METROREACH, NG4, NG3, OMX, OPTENET,PG-FLEX, PG-PLUS, PICABOND, POWERWORX, TRACERLIGHT, SONOPLEX, TDUX, THINMUX, TRAC, UNICAB, WORLDDLS WORLDMUX, XAGA, and TE Connectivity, TE connectivity (logo), Tyco Electronics, TE (logo), are trademarks of the TE Connectivity Ltd. family of companies and its licensors.

While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. ADCP-40-005• Issue 11 - Original 2008 Revised 05/14

Tyco Electronics and ADC are now TE Connectivity

http://www.te.com/

Documents

TE Connectivity Warranty/Software Handbookwalkerfirst.com/uploads/files/literature/TE Warranty Handbook.pdf · TE Connectivity Warranty/Software Handbook . Telecom and Wireless