TDW Products and Services Catalog - songameng · T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 Data subject to change without notice

T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA

Toll Free

1-888-TDWmSon (839-6766)

T. D. Williamson, Inc.

®SHORTSTOPP® 275/500Plugging System Sizes: 1-1/2” through 12”

SHORTSTOPP®

Plugging/Completion MachinePlugging: 1-1/2” through 4”Completion: 1-1/2” through 12”SHORTSTOPP®

Jackscrew ActuatorPlugging: 4” through 12”

Patented in the United States and in foreign countries.ISO 9001 Certified

The lightweight (37 lbs.) SHORTSTOPP®Plugging/Completion Machine is versatile and easyto operate. When used as a plugging machine, itwill plug 1-1/2” at 275 psi and 2” through 4” linesat 500 psi, and can be used on SHORTSTOPP®300 D Fittings (ASME Class 300). As a completionmachine, it has a full range capability of setting 1-1/2” through 12” completion plugs, and willadapt to existing housings in the field.

The SHORTSTOPP® Jackscrew Actuator has thecapability of plugging 4” through 12” lines up to500 psi. This provides an economical way to pluglines that operate in excess of 275 psi. It alsoadapts to existing housings in the field, and willplug through SHORTSTOPP® 300 D Fittings(ASME Class 300).

Both models provide an efficient and economicalmeans of stopping off mains for repairs,relocations or additions.

Description

Maximum working pressure is 500 psi (34.5 bar) @ 100°F (38°C). Maximum workingtemperature is 180°F (82°C) @ 440 psi (30.3 bar). Pressure ratings are limited tofittings and adapters used.

Specifications

Bulletin No: 2020.002.01Date: February 2000Cross Indexing No: n/aSupersedes: 2020.002.00 (2/99)

Actuator Overall Rate of Size Travel Length Weight Travel/Revolution

Inches DN Inches mm Inches mm Lbs. Kg. Inches mm Part Number1-1/2 to 12 40 to 100 28 711.2 44-1/2 1130.3 39 18 1/8 3.175 07-1034-0000

For 1-1/2” through 4” sizes, the actuator functions as a plugging machine. This same actuator also functions as a completion machine for sizes 1-1/2” through 12”.

T. D. Williamson, Inc.®


Dimensions and Part Numbers

SHORTSTOPP®

275/500 Plugging System

Manual SHORTSTOPP® Plugging/Completion Machine

Sealing Cups Used With 1-1/2” through 4” Plugging MachinePipe Dimensions

Size Maximum ID Minimum IDInches DN Part Number Max. Working in psi Inches mm Inches mm1-1/2 40 08-0114-0015 275 1-5/8 41 1-9/16 40

2 50 08-0947-0002 275 2-1/8 54 2-1/16 522 50 08-3425-0002 500 2-1/8 54 2-1/16 523 80 08-0947-0003 275 3-3/16 81 3-1/16 783 80 08-2253-0005 500 3-3/16 81 3-1/16 784 100 08-0947-0004 275 4-1/4 108 4-1/64 1024 100 08-0036-0005 500 Specify pipe ID when ordering.

HousingsSize Weight

Inches DN Part Number Max. Working Pressure in psi Lbs. Kg.1-1/2 40 08-1746-0000 500 7 3.2

2 50 08-1746-0000 500 7 3.23 80 08-1747-0000 500 10 4.54 100 08-1748-0000 275* 28 12.74 100 08-2148-0000 500** 36 16.3

* ASME Class 150** ASME Class 300

Plugging HeadsSize Weight

Inches DN Part Number Max. Working Pressure in psi Lbs. Kg.1-1/2 40 08-1741-0000 275 1 .5

2 50 08-2252-0000 500 2 13 80 08-2253-0000 500 4 1.84 100 08-1744-0000 500 9 4

Typical 1-1/2”-3” Housing

Cup

Typical 1-1/2”-3” Plugging Head




SHORTSTOPP®


Actuator Overall Rate of Size Travel Length Weight Travel/Revolution

Inches DN Inches mm Inches mm Lbs. Kg. Inches mm Part Number4 to 12 100 to 300 48 1219 64-1/8 1629 140 64 1/8 3 08-0940-0000

Manual SHORTSTOPP® Jackscrew Actuator

Plugging Heads

Sealing Cups Used With 4” through 12” Plugging Machine

Plugging Housings*

Size Class 150 Weight Class 300 WeightInches DN Part Number Max. Working Pressure in psi Lbs. Kg. Part Number Max. Working Pressure in psi Lbs. Kg.

4 100 08-0941-0000 275 48 22 08-2143-0000 500 51 236 150 08-0942-0000 275 75 34 08-2144-0000 500 81 378 200 08-0943-0000 275 96 43 08-2145-0000 500 141 64

10 250 08-0944-0000 275 156 71 08-2146-0000 500 207 9412 300 08-0945-0000 275 221 100 08-2147-0000 500 297 135

*4” through 12” plugging machine housings also can function as completion housings to set 4” through 12” completion plugs with use of an 06-7264-0000 adapter plate.

Pipe DimensionsSize Maximum ID Minimum ID

Inches DN Part Number Max. Working in psi Inches mm Inches mm4 100 08-0947-0004 275 4-1/4 108 4-1/64 1024 100 08-0036-0005 500 Specify pipe ID when ordering.

6 150 08-0947-0006 275 6-1/8 156 6-1/16 1546 150 08-0948-0006 275 6-5/16 160 6-3/16 1576 150 08-0040-0005 500 Specify pipe ID when ordering.

8 200 08-0947-0008 275 8 203.2 7-31/32 202.78 200 08-0948-0008 275 8-11/32 212 8-1/16 2058 200 08-0246-0005 500 Specify pipe ID when ordering.

10 250 08-0947-0010 275 10-1/8 257 10-1/64 25410 250 08-0948-0010 275 10-3/8 264 10-3/16 25910 250 08-0247-0005 500 Specify pipe ID when ordering.

12 300 08-0947-0012 275 12-11/32 314 11-15/16 30312 300 08-0248-0005 500 Specify pipe ID when ordering.

Size WeightInches DN Part Number Max. Working Pressure in psi Lbs. Kg.

4 100 08-1630-0000 500 7 36 150 08-1908-0000 500 24 118 200 08-1909-0000 500 44 2010 250 08-1910-0000 500 88 4012 300 08-1911-0000 500 150 68

Cup

Plugging and/or Completion Housing

Typical 6” Plugging Head




SHORTSTOPP®


Side Outlet Pluggers — Maximum Working Pressure is 275 psi

1-1/2” through 4” using Plugging/Completion MachineSize Part Number Weight Spare Seals

Inches DN Lbs. Kg. Part Number1-1/2 40 08-1871-0000 1.5 .7 08-1871-0002

2 50 08-1872-0000 2.2 1 08-0976-00023 80 08-1873-0000 5 2 08-0977-00024 100 08-1874-0000 12 5 08-0928-0002

4” through 12” using Jackscrew Actuator4 100 08-0928-0000 12 5 08-0928-00026 150 08-0929-0000 24 11 08-0929-00028 200 08-0930-0000 38 17 08-0930-0002

10 300 08-0931-0000 67 30 08-0931-000212 350 08-0932-0000 95 43 08-0932-0002

The side outlet plugger can be installed on the end of either SHORTSTOPP® Plugging Machine and is used on TDW 3-WAY Tees™ and Spherical 3-WAY Tees™ to plug the tapped hole in the main line. This stops flow into the sideoutlet, permitting maintenance work on the branch connection.

T-203 Tapping Machine Adapters*

Size Class 150 Weight Class 300 WeightInches DN Part Number Max. Working in psi Lbs. Kg. Part Number Max. Working in psi Lbs. Kg.

4 100 06-1542-0000 275 29 13 06-7370-0000 720 38 176 150 06-1543-0000 275 43 20 06-7371-0000 720 65 308 200 06-1544-0000 275 67 30 06-7372-0000 720 95 43

10 250 06-1545-0000 275 95 43 06-7373-0000 720 140 6412 300 06-1546-0000 275 160 73 06-7374-0000 720 205 93

*T-203 Tapping Machine adapters also function as completion housings to set 4” through 12” completion plugs with use of an 06-7265-0000 adapter plate.

1-1/2” through 12” Completion Plug Holders

Housings and Adapters

When used with the proper adapter plate,these plugging housings and T-203 adapters canbe used with the plugging/completion machineto set 4” through 12” plugs.

SHORTSTOPP® Plugging/Completion Machine — Part Number 07-1034-0000

For 1-1/2” through 4” sizes, the actuator functions as a plugging machine. This same actuator also functionsas a completion machine for sizes 1-1/2” through 12”. In sizes 1-1/2” through 4”, the plugging housings alsoserve as completion machine housings, without need for adapter plates (see page 2).

Size WeightInches DN Part Number Lbs. Kg.

1-1/2 - 3 40 - 80 07-0974-0000 1 .54 - 8 100 - 200 07-0334-0000 2 1

10 - 12 250 - 300 07-0335-0000 2-1/2 1.5

NOTE: Completion plug setting pressure limited to pressure rating of completion machine.

1-1/2” - 3” Completion Plug Holder

Typical 4” - 12”Completion Plug Holder

Adapter Plate Wt. 11 lbs/5 Kg. Part Number 06-7265-0000

T-203 Tapping and /or Completion Housing

Adapter plate only needed when used with the plugging/completion machine (07-1034-0000) on 4” through 12” T-203Tapping Machine Adapters.

Side Outlet Plugging Option

Series 300SANDWICH® Valve

Full-encirclement3-WAY™ Tee

Typical SHORTSTOPP® PluggingMachine Control Bar

Side Outlet Plugger

Main Line

Branch

Data Sheet No. SS275-1-1/2Date: January 2003Supersedes: March 1999


®

Data

She

et N

o.SS

275-

1-1/

2

Tapping and SHORTSTOPP®

Plugging Machine Equipment Needed to Plug a 1-1/2” Gas Main to 275 psi

Data Sheet No.

SS275-1-1/2

T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA

Tapping Plugging

Optional**

1-1/2” Pipe

1-1/2” 3-WAY™ Tee

1-1/2” 3-WAY™ Tee (includescompletion plug, O-ring, and pipe cap)Stock No. 26-0216-0000

**Refer to back for fitting options.***Refer to back for completion.

1-1/2” Welding Fitting (includescompletion plug, O-ring, and pipe cap)Stock No. 26-0211-0000

1/2” through 4” taps T-101Drilling Machine Stock No. 05-1028-0000-00Reference Bulletin 2000.001

Bleeder Valve and Nipple includedwith T-101 Drilling Machine

2” Valve Adapter00-0706-0015

Holder Pilot05-0275-0000

1-1/2” Hole Saw (nominal)00-1151-0009

Bleeder Valve and Nippleincluded with machine

2” Housing 08-1746-0000

1-1/2” Plugging Head08-1741-0000

Sealing Cup08-0114-0015

SHORTSTOPP® Plugging / Completion Machine Stock No. 07-1034-0000Reference Bulletin 2020.002

Pipe Cap

Completion Plug with O-ring***Completion Plugwith O-ring***

Pipe Cap

1-1/2” Welding Fitting

Handle2” SHORTCUTT®

500 Valve 09-0758-0000

500 PSI

Data

She

et N

o.SS

275-

1-1/

2



®


Plugging Machine1-1/2” Gas Main to 275 psi

Fittings

Data Sheet No. SS275-1-1/2

Welding Fitting See Bulletin 2100.003

3-WAY™ TeeSee Bulletin 2100.002

Note: Consult your TDW representative for additional fitting options.

Completion

Completion Plug Holder07-0974-0000

2” Housing08-1746-0000

SHORTSTOPP®

Plugging/Completion MachineStock No. 07-1034-0000Reference Bulletin 2020.002

Data Sheet No. SS275-2Date: January 2003Supersedes: March 1999


®

Data

She

et N

o.SS

275-

2


Plugging Machine Equipment Needed to Plug a 2” Gas Main to 275 psi

Data Sheet No.

SS275-2


Tapping Plugging

Optional**

2” Pipe

2” 3-WAY™ Tee

2” 3-WAY™ Tee (includes completion plug, O-ring, and pipe cap)Stock No. 26-0217-0000


2” Welding Fitting (includes completion plug, O-ring, and pipe cap) Stock No. 26-0212-0000

1/2” through 4” taps T-101 Drilling Machine Stock No. 05-1028-0000-00Reference Bulletin 2000.001




2” Hole Saw (nominal)05-0179-0002


2” Housing 08-1746-0000

2” Plugging Head08-2252-0000



Completion Plugwith O-ring***

2” Pipe Cap2” Pipe Cap

2” Welding Fitting

Completion Plug with O-ring***


500 Valve 09-0758-0000

500 PSI

Data

She

et N

o.SS

275-

2



®


Plugging Machine2” Gas Main to 275 psi

Fittings

Data Sheet No. SS275-2

Completion


2” Housing08-1746-0000

SHORTSTOPP®




Spherical 3-WAY™ Tee See Bulletin 2100.007

Mechanical SHORTSLEEVE™ Fitting See Bulletin 2110.002




®

Data

She

et N

o.SS

275-

3



Data Sheet No.

SS275-3


Tapping Plugging

Optional**

3” Pipe

3” 3-WAY™ Tee

3” 3-WAY™ Tee (includes completionplug, O-ring, and pipe cap)Stock No. 26-0218-0000


3” Welding Fitting (includes completion plug, O-ring, and pipe cap)Stock No. 26-0213-0000

1/2” through 4” taps T-101 Drilling Machine Stock No. 05-1028-0000-00Reference Bulletin 2000.001




3” Hole Saw(nominal)05-0179-0003


3” Housing 08-1747-0000



Completion Plugwith O-ring***

Completion Plug with O-ring***

3” Pipe Cap3” Pipe Cap




500 Valve 09-0759-0000

500 PSI

Data

She

et N

o.SS

275-

3



®



Fittings


Completion


3” Housing08-1747-0000

SHORTSTOPP®







Tapping Plugging




4” Hole Saw05-0179-0004

Pilot Drill05-0247-0003

4” SHORTSTOPP®

Cutter (nominal)05-0255-0004

Key Cutter Holder05-0227-0000

T-203 ValveAdapter06-1542-0000


Optional*

Optional


4” Pipe

Cover Flange

Completion Plug**

Cover Flange

Completion Plug**

4” 3-WAY™ Tee

3-WAY™ Tee (includes cover flange with bolts, gasket and plastic caplugs, completion plugand O-ring)Stock No. 06-7218-0000

*Refer to back for fitting options.**Refer to back for completion.

Fitting (includes cover flange with bolts,gasket and plastic caplugs, completion plugand O-ring) Stock No. 06-7213-0000


4” through 12” taps T-203 TappingMachine with air motor driveassembly and carrying case.

Stock No. 05-2173-0000Reference Bulletin 2100.007

4” Housing 08-1748-0000





®

Data

She

et N

o.SS

275-

4


Plugging Machine Equipment Needed to Plug a 4” Gas Main to 275 psiUsing Completion Machine

Data Sheet No.

SS275-4

SHORTSTOPP® Plugging/Completion Machine Stock No. 07-1034-0000Reference Bulletin 2020.002

Valve-to-Fitting Adapter06-5724-0001

4” SHORTSTOPP® Valve09-0696-0000285 psiAluminum Body

4” SHORTCUTT® Valve09-0040-0000275 psi

Data

She

et N

o.SS

275-

4



®



Fittings


Completion


4” Housing08-1748-0000

SHORTSTOPP®

Plugging/Completion MachineStock No. 07-1034-0000Reference Bulletin 2020.002.00







Tapping Plugging




4” Hole Saw05-0179-0004


4” SHORTSTOPP®


Cutter Holder Key 05-0227-0000



Optional*

Optional


4” Pipe

Cover Flange

Completion Plug**

Cover Flange

Completion Plug**

4” 3-WAY™ Tee

3-WAY™ Tee (includes cover flange with bolts, gasket and plastic caplugs, completion plugand O-ring)Stock No. 06-7218-0000


Fitting (includes cover flange with bolts,gasket and plastic caplugs, completion plugand O-ring) Stock No. 06-7213-0000


4” through 12” taps T-203 TappingMachine with air motor driveassembly and carrying case.

Stock No. 05-2173-0000Reference Bulletin 1000.007

4” Housing 08-0941-0000



Data Sheet No. SS275-4ADate: January 2003Supersedes: March 1999


®

Data

She

et N

o.SS

275-

4A



Data Sheet No.

SS275-4A

SHORTSTOPP® Jackscrew ActuatorStock No. 08-0940-0000Reference Bulletin 2020.002








Completion

Data

She

et N

o.SS

275-

4A



®



Fittings

Data Sheet No. SS275-4A


SHORTSTOPP®


Adapter06-7264-0000

Adapter06-7265-0000


SHORTSTOPP®

Plugging Housing08-0941-0000

T-203 Tapping andCompletion Housing06-1542-0000

Optional


Plugging


Optional*


6” Pipe

Cover Flange

Completion Plug**

Cover Flange

Completion Plug**

6” 3-WAY™ Tee

6” 3-WAY™ Tee (includes coverflange with bolts, gasket and plastic caplugs, completion plugand O-ring)Stock No. 06-7219-0000


6” fitting (includes cover flanges with bolts,gaskets and plastic caplugs, completion plugand O-ring) Stock No. 06-7214-0000

6” Housing 08-0942-0000


6” Sealing Cup08-0948-0006 (6-5/16 to 6-3/16 ID)08-0947-0006 (6-1/8 to 6-1/16 ID)



®

Data

She

et N

o.SS

275-

6



Data Sheet No.

SS275-6





Tapping

Note: Either the T-101 XL or T-203 Tapping Machineis recommended for 6” taps.

6” Hole Saw05-2348-0006

Holder Pilot05-2053-0000-00

6” Valve Adapter06-8872-0001-00

Bleeder valve andnipple included with T-101 XL DrillingMachine.

T-101 XL Drilling MachineStock No. 05-1029-0000-00Reference Bulletin 2000.001

T-203 TappingMachine with airmotor driveassembly andcarrying case.Stock No. 05-2173-0000Reference Bulletin1000.007


Cutter Holder05-0326-0000

6” SHORTSTOPP®



Optional





Completion

Data

She

et N

o.SS

275-

6



®



Fittings



SHORTSTOPP®


Adapter06-7264-0000

Adapter06-7265-0000


SHORTSTOPP®



Optional


Tapping Plugging


8” SHORTSTOPP®





Optional*


8” Pipe

Cover Flange

Completion Plug**

Cover Flange

Completion Plug**

8” 3-WAY™ Tee



8” fitting (includes cover flange with bolts,gasket and plastic caplugs, completion plugand O-ring) Stock No. 06-7215-0000

T-203 Tapping Machine with air motordrive assembly and carrying case.Stock No. 05-2173-0000Reference Bulletin 1000.007

8” Housing 08-0943-0000


8” Sealing Cup08-0948-0008 (8-1/32” to 8-1/16” ID)08-0947-0008 (8” to 7-31/32” ID)



®

Data

She

et N

o.SS

275-

8



Data Sheet No.

SS275-8



8” SHORTCUTT® Valve09-0042-0000

275 psi





Completion

Data

She

et N

o.SS

275-

8



®



Fittings



SHORTSTOPP®


Adapter06-7264-0000

Adapter06-7265-0000


SHORTSTOPP®



Optional


Tapping Plugging


10” SHORTSTOPP®





Optional*


10” Pipe

Cover Flange

Completion Plug**

Cover Flange

Completion Plug**

10” 3-WAY™ Tee



10” fitting (includes cover flange with bolts,gaskets and plastic caplugs, completion plugand O-ring) Stock No. 06-7216-0000


12” Housing 08-0945-0000


10” Sealing Cup08-0948-0010 (10-3/8” to 10-3/16” ID)08-0947-0010 (10-1/8” to 10-1/64” ID)



®

Data

She

et N

o.SS

275-

10



Data Sheet No.

SS275-10




285 psi





Completion

Data

She

et N

o.SS

275-

10



®



Fittings



SHORTSTOPP®


Note: 10” SHORTCUTT® Valvesnot available. Plugging andcompletion are done through 12”SHORTCUTT® Valve.

Adapter06-7264-0000

Adapter06-7265-0000


SHORTSTOPP®



Optional


Tapping Plugging


12” SHORTSTOPP®





Optional*


12” Pipe

Cover Flange

Completion Plug**

Cover Flange

Completion Plug**

12” 3-WAY™ Tee



12” fitting (includes cover flange with bolts,gaskets and plastic caplugs, completion plugand O-ring) Stock No. 06-7217-0000


12” Housing 08-0945-0000


12” Sealing Cup08-0947-0012 (12-11/32 to 11-15/16 ID)



®

Data

She

et N

o.SS

275-

12



Data Sheet No.

SS275-12




275 psi





Completion

Data

She

et N

o.SS

275-

12



®



Fittings



SHORTSTOPP®


Adapter06-7264-0000

Adapter06-7265-0000


SHORTSTOPP®



Optional

Documents

TDW Products and Services Catalog - songameng · T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 Data subject to change without notice