TDK & EPCOS Product Survey 2015 for components/misc/1095.pdf · 2016-06-08 · Series Resonant transformers Flyback transformers Choke coils SRV series SRW series PFC series Technical

Electronic Components,Modules and Systems

www.global.tdk.com · www.epcos.com

TDK and EPCOS Product Survey 2015

Superior Solutions for a Smart World.

• Ceramic capacitors

• Aluminum electrolytic capacitors

• Film capacitors

• Power quality solutions

• Ferrites and inductive components

• RF filters and modules

• ESD/EMI modules

• Piezo components

• Protection devices

• Sensors

Contents

• Transformers 4

• Power Inductors 7

• Signal Use Inductors 12

• Multilayer Inductors 14

• Signal EMC Filters 16

• Power EMC Filters and Chokes 21

• Ferrites 23

• Noise Suppressing Sheets 26

• Important Notes 77

Magnetics 4

• MEMS Devices for Mobile Communications and Information Technology 27

• SAW Filters, Duplexers for Base Stations, Small Cells,Femto Cells and Trunked Radio 27

• SAW Filters for Automotive and Industrial 28

• SAW Filters for Multimedia 28

• SAW Filters, Duplexers and Modules for Cellular Communications 29

• Modules for Information Technology 30

• Ceramic and Thin-Film RF Components 30

• LTCC Substrates for LED 34

SAW Components 27

• Piezo Actuators for Automotive 36

• Piezo Receivers, Buzzers 36

• Surge Arresters 37

• PTC Thermistors 39

• Varistors 42

• Inrush Current Limiters 44

• Multilayer Varistors, Ceramic Transient Voltage Suppressors (CTVS) 44

• NTC Thermistors 45

• Nebulizer Units 46

Piezo and Protection Devices 36

• NTC Sensors 47

• Pressure Sensors 50

• Humidity Sensors 51

• Applied Sensors 52

Sensors 47

• Multilayer Ceramic Capacitors 54

• Leaded Ceramic Capacitors 57

• Ultra-High Voltage Capacitors 57

Ceramic Capacitors 54

• Medium Power Film Capacitors 58

• DC Link, DC Filtering Film Capacitors 61

• AC Output/Input Filters 61

• AC Film Capacitors 62

• PFC Capacitors and Key Components for Power Quality Solutions 63

• Power Capacitors 65

Film Capacitors 58

• Ferrite Magnets 70 • Rare Earth Magnets 71

Magnets 70

• ITO Transparent Conductive Film 75

Transparent Conductive Film 75

• Bluetooth V4.0 Smart Single Mode Module 35

Micro Modules 35

Aluminum Electrolytic Capacitors 67

Electric Double Layer Capacitors 69

Wireless Charging 76

4 Please read Important notes on page 77. © TDK-EPC Corporation 2010

MagneticsTransformers

EPCOSTDK

Series EP6 shielded – SMD EHR – SMD EP7 – SMD EP13 – SMD

Technicaldata

Features

Applications

Transformers

Output voltage (typ.):80 … 140 V

Size (l x w x h):9 x 7.6 x 7.4 mm

– High turn ratio– Low leakage inductance– High frequencies– Insensitive to external

fields– AEC-Q200 approved

Xenon lightsLED headlightsPiezo fuel injection systems

Power suppliesPower over Ethernet (PoE)

Power suppliesPower over Ethernet (PoE)

Power: 20 … 50 W

– High saturation currents– Low leakage inductance– High frequencies – AEC-Q200 approved

Size (l x w x h):10 x 8.0 x 10.9 mm

– Low leakage inductance– Compact design– Supplementary/

reinforced insulation levels

Size (l x w x h):13.5 x 17.5 x 12.4 mm

– Compact design– Very low THD– Supplementary/

reinforced insulation levels

Power suppliesDC/DC converters

Power supplies Compact DC/DC convertersfor midrange power

Electric car applications(xEV)

Series ER11 – SMD EF12.6 … EF25 Current-sense transformers – Current-sense transformers –SMD SMDB82801 PCEM, CTEM series

Technicaldata

Features

Applications

Transformers

Power: up to 1 W

Operating temperature:up to +155 °C

Size (l x w x h):12 x 13 x 6 mm

– Low stray inductance– High power density– High operating

frequencies

Power: up to 20 W

Size (l x w x h):15.5 x 14.5 x 12.5 … 28.5 x 28.9 x 21 mm

– Pin-to-Hole (PTH)– High creepage distance– High dielectric strength– Types with 8 mm creepage

and clearance distanceavailable

Sensed current 7… 40 A

Turns ratio: 1:20 … 1:200

– Standard designs in SMD– Three different sizes

available– Very low DC resistance,

losses and high reliability– Ruggedness and simple

implementation– Customized designs

Isense: up to 20 ARMS

Turn ratio: 1:100

– Basic isolation– AEC-Q200 approved

Park Distance Control units (PDC)

5© TDK-EPC Corporation 2010 Please read Important notes on page 77.


EPCOSTDK

Series Power chokes – Power transformers Gate-drive transformers – SMDPCEM series PTEM series B82804

Technicaldata

Features

Applications

Transformers

LR: 1 … 3 µH

IR: up to 210 A

– Basic isolation– Low DC resistance– AEC-Q200 approved

Power: 1800 … 3000 W

Vin, typ: 240 … 420 V

Vout, typ: 14 … 18 V

– Basic isolation– Innovative cooling concept– AEC-Q200 approved

Isolation voltage: 1500 V DC

Height: max. 5.4 mm

Footprint: max. 8.1 x 6.7 mm

– Standard designs in SMD– Low leakage inductance– Low inter-winding capacitance– High SRF value– High isolation between primary and

secondary

Electric car applications (xEV) Electric car applications (xEV) General purpose isolated AC/DC,DC/DC converters

Series Flyback transformers – SMD Flyback transformers Resonant transformersB82802 ECO series SRX series

Technicaldata

Features

Applications

Transformers

Power: 12 … 55 W Input voltage: 36 … 60 V DC Frequency: 100 kHzOutput voltage: 5, 12 or 3.3, 5, 12 VIsolation voltage: 1500 V ACSuitable for ambient temperature:up to +85 °C Operating temperature: up to +125 °C

– Low profile SMT packages– Industry standard footprints– Customized designs

Vertical typePower: 12 … 68 WFrequency: 50 kHz

Horizontal typePower: 5 … 59 WFrequency: 50 … 100 kHzOperating temp: –30 … +120 °C

– Pin terminal type (for multiple outputs)

– Downsized– Compliant with worldwide safety

standards– Supports automatic winding– Reduced characteristic variations– Halogen-free

Horizontal typePower: 100 … 300 W Frequency: 60, 80, 100 kHz Number of outputs: 2, 3

– Pin terminal type (Resonant type, Through-hole)

– Low height (15 … 31.5 mm) – High power in compact dimensions– Supports automatic winding

DC/DC converters (isolated buck)Power over Ethernet (PoE)

Switching power supplies Switching power supplies



EPCOSTDK

Series Resonant transformers Flyback transformers Choke coilsSRV series SRW series PFC series

Technicaldata

Features

Applications

Transformers

Vertical typePower: 160 … 250 WFrequency: 100 kHzNumber of outputs: 2

– Pin terminal type (Resonant type,Through-hole)

– Low height (15 … 16 mm)– High power in compact dimensions– Supports automatic winding

For multiple outputs (vertical type) Power: 51 … 83 WFrequency: 50 … 100 kHzOperating temp: –30 … +120 °C

For multiple outputs (horizontal type) Power: 58 … 72 WFrequency: 50 … 100 kHzOperating temp: –30 … +120 °C– Pin terminal type for multiple outputs– New high B, low loss PC47 material– Adopts new EGG cores developed

for power transformers– Ideal for small, multiple output

switching power supplies– Perfect balance between core

volume

Power: 75 … 300 W Frequency: 50, 65 kHzInductance: 150 … 600 µHRated peak current: 2.4 … 11.1 ATurn ratio: 9.0 … 10.8 Np/NpdOperating temp.: –30 … +120 °C

– Pin terminal type– Low height (15.5 … 27 mm)– High current in compact dimensions

Switching power supplies Switching power supplies General purpose isolated AC/DC,DC/DC converters

Series Universal multiwinding Gate-drive transformers Current sense transformerstransformers VGT series VST seriesPCA series

Technicaldata

Features

Applications

Transformers

Inductance at 10 kHz, 0.1 VRMS:Parallel: 3.2 ± 20% … 197.3 ± 30% µH Series: 2.8 ± 30% mH … 985 ± 20% µH DCR ±15%:Parallel: 5.2 … 44.4 mΩSeries: 188 … 1607 mΩOperating temp.: –40 … +85 °C

– Multi-functional DC/DC transformers – Can be used as inductors (coupled,

step-down, step-up, resonance) or DC/DC transformers (flyback, forward, push-pull)

– Available in four types

Inductance: 10 µH ± 20% (100 kHz, 1V)Leakage Inductance: 0.2 µH max (100 kHz, 1V, NF, NS shorted)Withstanding voltage: NP, NF – NS: 2.6 kVRMSOperating temp.: –40 … +130 °C

– High flux density cores have beenadopted to achieve miniaturization

– Dielectric strength voltage is 2.6 kV

Inductance NS: 4.0 mHDC resistance: NP 0.5 max mΩNS 3.2 ± 30% ΩRated current NP: 30 max ARMSWithstanding voltage: 2.0 kVRMS/1 min.Maximum ET constant: 120 V-µSOperating temp.: –40 … +125 °C

– High flux density cores have beenadopted to achieve miniaturization

– Maximum 30 Arms can be measured

POL (Point of Load) DC/DC converters,Digital consumer electronics

Automotive: IPM drive of the motor inverter.

Automotive: Switching current detection in on-board DC/DC converters and chargers


MagneticsTransformers, Power Inductors

EPCOSTDK

Series Balun transformers – SMD Pulse transformers for LAN – SMDATB series ALT series

Technicaldata

Features

Applications

Transformers

Size: 2012 … 3225 DC resistance: 0.5 … 1.0 ΩRated current: 0.15 … 0.28 AWithstanding voltage: 125 VOperating temperature: –40 … +85 °C

– Small size enables a reduction of mounting surfaces– Stable charging characteristics– High reliability

– Compatible with 10BASE-T, 100BASE-TX, and1000BASE-T

– High-quality product with automatic winding

TVsMobile devicesSet Top Box

LAN interface portion of various devices like network devices, communication devices, and digital home appliances

Size: 3225 … 4532 Inductance (at 100 kHz/DC bias = 8 mA) 201 : 170 … 200 µH min. Insertion loss (0.1 … 100 MHz): 1.5 … 2.5 db max.Interwinding stray capacitance (100 kHz): 35 pF max.Operating temperature: –40 … +85 °C

Series Pulse transformers for Automotive Power inductors – SMDLAN, MOST A and G versionsTLA8T103, TLA8T105 B82471 … B82479

Technicaldata

Features

Applications

Transformers Power Inductors

16 Pin (1.27 mm PITCH) SMD package

TLA8T103:Operating, storage temperature: –40 … +95 °C Withstanding voltage ERMS: 1500 V (60 s)

TLA8T105:Operating, storage temperature: –40 … +85 °C Withstanding voltage ERMS: 100 V (60 s)

– Excellent common-mode noise suppression– High reliabilityTLA8T103:– Greater than 100 µH (100 kHz)TLA8T105:– Greater than 350 µH (100 kHz) at DC current bias 8 mA

– Shielded and unshielded construction– High rated current– Low DC resistance– Suitable for lead-free reflow soldering

TLA-8T102: MOSTTLA-8T105: LAN (100/1000BASE-TX), PoE

Filtering of supply voltagesCoupling, decouplingDC/DC convertersConsumer and industrial electronics

Rated inductance: 1 … 1000 µHRated current: 0.18 … 9.8 ATemperature: up to +125 °CSize: 6.1 x 5.5 … 18.5 x 15.24 mmHeight: 3.5 … 7.25 mm


MagneticsPower Inductors

EPCOSTDK

Series Power inductors – SMD Power inductors – SMDA and G versions P, R and M versionsB82462, B82464 B82464 … B82477

Technicaldata

Features

Applications

Power Inductors

Rated inductance: 0.82 … 1000 µHRated current: 0.11 … 7.6 ATemperature: up to +150 °CSize: 6 x 6 and 10 x 10 mmHeight: 3.0 … 4.8 mm

– Shielded and unshielded construction– High rated current– Low DC resistance– Qualified to AEC-Q200– Suitable for lead-free reflow soldering as referenced

in JEDEC J-STD 020D

– Shielded and unshielded construction– High mechanical stability– High rated current– Low DC resistance– Qualified to AEC-Q200– Suitable for lead-free reflow soldering

as referenced in JEDEC J-STD 020D

Filtering of supply voltagesCoupling, decouplingDC/DC convertersAutomotive and industrial electronics

Filtering of supply voltagesCoupling, decouplingDC/DC convertersAutomotive electronicsLED lighting

Rated inductance: 0.82 … 1000 µHRated current: 0.2 … 11 ATemperature: up to +150 °CSize: 7.3 x 7.3 … 12.5 x 12.5 mmHeight: 4.5 … 8.5 mm

Series ERU chokes – SMD Dual inductors – SMDHelically wound B82472D … B82480DB82559 B82477C

Technicaldata

Features

Applications

Power Inductors

Rated inductance: 0.5 … 35 µHSaturation current: 9.3 … 71 ASize: 13.2 x 11, 22.5 x 22 and 25.3 x 23.5 mmHeight: 4.95 … 14.2 mm

– Flat wire winding– Self-leaded construction under body termination– Very high rated current– Extremely low DC resistance– Suitable for pick-and-place process– Suitable for lead-free reflow soldering

as referenced in JEDEC J-STD 020D

– Two windings– 1:1 transformer– Shielded construction– Special winding technology for low stray inductance– High coupling factor– Qualified to AEC-Q200– Suitable for lead-free reflow soldering as referenced

in JEDEC J-STD 020D

Energy storage chokes for DC/DC convertersVRM modulesPOL converters

Common-mode chokesSEPIC, CUK and flyback topologiesDC/DC convertersAutomotive electronicsLED lighting

Rated inductance: 2.0 …100 µH (inductance per winding)Rated current: 1.35 … 11.5 A Temperature: up to +150 °CSize: 7.3 x 7.3 … 15.5 x 15.5 mmHeight: 4.5 … 14.5 mm



EPCOSTDK

Series General use – SMD Automotive general use – SMD General use – SMDCLF-NIT series CLF-NIT-D series VLCF series

Technicaldata

Features

Applications

Power Inductors

Size: 3020 … 12577Inductance: 1.0 … 470 µHRated current: 1.9 … 10.6 A

– General use for portable DC/DC converter line

– High magnetic shield constructionactualizes high resolution for EMCprotection

Size: 3020, 12577Inductance: 1.5 … 470 µHRated current: 370 mA … 8.9 ATemperature: up to +150 °C

– High rated DC current– High reliability with welding

connection– Ferrite shielded component

Size: 4018 … 5028Inductance: 1.2 … 470 µHRated current: 140 … 2710 mA

– General use for portable DC/DCconverter line

– High magnetic shield construction

Consumer electronics Automotive (generic automotive DC/DC converter line)

DC/DC converters for communication Consumer electronicsPCs

Series General use flat wire type – SMD Automotive flat wire type – SMD General use – SMDVLM series VLM-D1 series SPM series

Technicaldata

Features

Applications

Power Inductors

Size: 10555 … 13580Inductance: 0.33 … 4.3 µH Rated current: 7 … 18.5 ATemperature: –40 … +125 °C

– Low loss and large current capabilitydesign

– High magnetic shield construction– Magnetic coupling type core with

low magnetic flux leakage and athree-terminal structure

Size: 13580 Inductance: 1.5 … 10 µH Rated current: 4.2 … 26 ATemperature: up to +125 °C

– Low loss and large current capability– High magnetic shield construction

actualizes high resolution for EMCprotection

Size: 3012 … 6530Inductance: 1… 10 µH Rated current: 2.8 … 14.4 ATemperature: –40 … +125 °C

– High power handling capability:Small copper lossUsing large saturation induction ofFe-based metals

– High Curie temperature of about550 °C means low inductance temperature variance

Mobile communications Consumer electronicsPCsHDDs

Automotive (ECM, HID, brake control,navigation system and ECU)

Mobile communications, consumerelectronics, servers, VRM



EPCOSTDK

Series Automotive – metal composite High current – SMD Thin-Film – metal compositecore technology – SMD VLB series core technology – SMDSPM-PT series TFM-GHM series

Technicaldata

Features

Applications

Power Inductors

Size: 6530 … 12580Inductance: 0.25 … 22 µH Rated current: up to 28.6 A (22 µH)Temperature: up to +150 °C

– High rated DC and excellent saturation current

– High reliability with welding connection

Size: 7050 … 12065Inductance: 90 … 360 nH Rated current: 14 … 68 ATemperature: –40 … +125 °C

– High output processing capacity:Minimal copper loss

– High saturation current and low DC resistance

– High operating frequency up to 2 MHz

Size 2016 … 2520Inductance: 0.47 … 2.2 µH Rated current: 2.6 … 4.8 A

– Low height of 1.0 mm– Superior DC-bias characteristics– Consists of original fine copper

pattern with micro-processing technology

– Coil pattern coated with metal magnetic material

Automotive (DC/DC converter, EMC filter applications)

ServersNotebooksPCsVRMsVRDs

Generic use for DC/DC converter ofmobile communication devices

Series Semi-shielded – SMD Small size, low profile, semi-shielded – Small size, low profile – SMDVLS-EX series SMD VLF-MT series

VLS seriesTechnicaldata

Features

Applications

Power Inductors

Size: 5040 … 6045Inductance: 1 … 680 µH Rated current: 0.3 … 9.4 A





Size: 2520 … 5040Inductance: 0.47 … 22 µH Rated current: 0.26 … 3.72 A

– DC/DC converter with topclass voltage conversion efficiency

– Low profile– Generic use for portable DC/DC

converter– High magnetic shield construction

Consumer electronicsNotebooksMobile communications

Mobile communicationsConsumer electronicsLCD displaysHDDs

Mobile communicationsLCD displaysHDDsDVCDSC



EPCOSTDK

Series Multilayer technology – SMD Small size, low profile, Small size, low profile,MLP, MLP-V series semi-shielded, metal core – SMD semi-shielded – SMD

VLS-HBX series VLS-CA seriesTechnicaldata

Features

Applications

Power Inductors


– Most suitable for power lines withlow output

– Optimized ferrite materials enablesthe reduction of losses

– DC superposition characteristicshave been substantially improved

Size: 2016 … 2520Inductance: 0.24 … 2.2 µH Rated current: 1.9 … 4.6 A



Size: 2010 … 4012Inductance: 0.47 … 47 µH Rated current: 0.31 … 2.75 A Temperature: –40 … +105 °C



Mobile communicationsPower supply modulesDSCPCsHDDs

Mobile communications Consumer electronics LCD displaysHDDs

Car accessoriesCar multimedia

Series Small size, low profile – SMD Multilayer technology – SMD Multilayer technology – SMDVLF-MT-CA series MLD series MLP-W series

Technicaldata

Features

Applications

Power Inductors

Size: 2520 … 5040Inductance: 0.47 … 22 µH Rated current: 0.26 … 3.72 ATemperature: –40 … +105 °C

– DC/DC converter with topclass voltage conversion efficiency

– Low profile– Generic use for portable DC/DC

converter– High magnetic shield construction

Size: 2012Inductance: 0.47 … 10 µH Rated current: 0.5 … 1.1 A Temperature: –55 … +125 °C

For compact DCDC converters– Most suitable for power lines with

low output– Optimized ferrite materials enables

the reduction of losses

Size: 2016 … 2520Inductance: 0.24 … 4.7 µH Rated current: 1.2 … 3.2 A

– Small size; height of 1.0 mm – Optimized ferrite materials enables

the reduction of losses– DC superposition characteristics

have been substantially improved

Car accessoriesCar multimedia

Automotive applicationsCamera modulesCar multimediaCar accessoriesConnectivity

Mobile communications DSCPCsHDDs


MagneticsPower Inductors, Signal Use Inductors

EPCOSTDK

Series Leaded RF chokes Leaded RF chokes Leaded VHF chokesAxial and radial versions PLUS families, axial and radial versions Axial versionB781 …, B821 … B781x8E, B82144F2/B2 B821 …, B82500

Technicaldata

Features

Applications

Power Inductors

Rated inductance: 1.0 … 100 000 µHRated current: 0.085 … 2.5 A

– Wide inductance range– Suitable for wave soldering

Rated inductance: 0.1 … 470 µH Rated current: 0.6 … 7.5 A

– High rated current– Low DC resistance– Suitable for wave soldering

Rated inductance: 1 … 3900 µHRated current: 0.1 … 10 A

– High resonant frequency– Suitable for wave soldering

LF and HF decoupling of signal andcontrol units

Lighting technologyIndustrial, automotive, entertainmentelectronics

Household appliances

DC-DC converterFiltering of supply voltagesRF blocking and filteringDecoupling and interference surpression

TelecommunicationsLED and energy-saving lampsEntertainment electronics

RF blocking and filteringInterference suppression in small appliances

Decoupling in telecommunication and entertainment electronics

Series SIMID 0603-C – SMD SIMID 0805-F – SMD SIMID 1210-H – SMDB82496C … B82498F … B82422H …

Technicaldata

Features

Applications

Signal Use Inductors

Size (EIA): 0603Inductance: 1 … 220 nHRated current: 110 … 1800 mATemperature: up to +150 °C

– High resonance frequency– Narrow inductance tolerances– High mechanic stability– Qualified to AEC-Q200

Size (EIA): 0805Inductance: 2.7 … 6800 nHRated current: 80 … 1000 mA

– Ceramic and ferrite core versions– High resonance frequency– Narrow inductance tolerance– Ceramic core version qualified to

AEC-Q200

Size (EIA): 1210Inductance: 1.0 … 680 µHRated current: 61 … 1150 mATemperature: up to +150 °C

– Very high current handling capability– Qualified to AEC-Q200

Multimedia appliancesWireless communication systemsCar access systemsTire Pressure Monitoring System (TPMS) GPSDigital cameras

Multimedia appliancesAntenna amplifiersWireless communication systemsCar access systemsGPS

Filtering of supply voltages, coupling,decoupling

DC/DC converters, power suppliesAutomotive electronicsTelecommunicationsConsumer and information technologyIndustrial electronics


MagneticsSignal Use Inductors

EPCOSTDK

Series SIMID 1210-100 – SMD SIMID 1812-T/C – SMD SIMID 2220-T – SMDB82422A … B82432T …, B82432C … B82442T…

Technicaldata

Features

Applications


Size (EIA): 1210Inductance: 0.0082 … 100 µHRated current: 65 … 800 mATemperature: up to +125 °C

– High resonance frequency– High Q factor– Qualified to AEC-Q200

Size (EIA): 1812Inductance: 1 … 1000 µHRated current: 55 … 1300 mATemperature: up to +150 °C

– High current handling capability– High Q factor– Qualified to AEC-Q200

Size (EIA): 2220Inductance: 1 … 10 000 µHRated current: 46 … 3510 mATemperature: up to +150 °C

– Very high current handling capability– High inductance values– Qualified to AEC-Q200


Antenna systemsAutomotive electronicsTelecommunicationsConsumer and information technologyIndustrial electronics


DC/DC convertersAntenna systems Automotive electronics Telecommunications Industrial electronics


DC/DC converters/power suppliesAutomotive electronicsTelecommunicationsConsumer electronicsIndustrial electronics

Series X/Y Transponder coils – SMD Z Transponder coils – SMD X/Y Transponder coilsB82450A …, B82450H … B82451N … TPL602727 series

Technicaldata

Features

Applications


Size 8 mm: B82450A … E …Size 11 mm: B82450A … A …High Q 11 mm: B82450H … A …Inductance: 1 … 7 mHSensitivity: 10 … 51 mV/µT

– Rugged construction for high mechanical stability when exposedto shock, drop and bending tests

– High Q version available– Low profile version available– Qualified to AEC-Q200

Car access systemsImmobilisersPassive Entry Passive Start (PEPS)Tire Pressure Monitoring System(TPMS)Heart rate monitoring devicesGoods tracking systems

Size: 7.7 x 7.5 x 2.65 mmInductance: 2.36 … 7 mHSensitivity: 16 mV/µT

– Rugged construction for high me-chanical stability when exposed toshock, drop and bending tests

– Qualified to AEC-Q200

Passive Entry Passive Start (PEPS)

Size: 5.85 x 2.7 mm Inductance: 7.2 mH (125 kHz) Inductance tolerance: ±3%DC resistance: 118 V

– Terminal fitting structure– “Thin wire bank” winding structure– Laser welding wire connection– Higher heat resistance wire– AEC Q200 compliant

Receiving LF antenna coils for in-car devices

Tire Pressure Monitoring System (TPMS)

Keyless entry systemsImmobilisers


MagneticsSignal Use Inductors, Multilayer Inductors

EPCOSTDK

Series For standard circuits – SMD For standard circuits – SMD For decoupling circuits – SMDNL(V) series NLFV/NLFC series NLC(V) series

Technicaldata

Features

Applications


Size: 2520 … 5650Inductance: 0.01 … 10 000 µH Rated current: 25 … 530 mA

– Good heat durability that withstands lead-free compatible reflow soldering conditions– Lead-free material is used for the plating on the terminal– Metal terminals provide excellent connection reliability– Highly heat-resistant thermoplastic resin is used to form the exterior package

Size: 2520 … 4532Inductance: 1 … 1000 µH Rated current: 20 … 800 mA

Size: 2520 … 5650Inductance: 0.1…1000 µH Rated current: 70 … 2850 mA

Consumer electronicsAutomotive (car audio and ECU systems)HDDs and ODDs

Consumer electronicsCommunicationsAutomotive (car audio and ECU systems)HDDs and ODDs

Series High frequency for standard circuits – High frequency – High Q – SMD High frequency – High Q – SMD SMD MLG-Q series MLG-P seriesMLG, MLG-S series

Technicaldata

Features

Applications

Multilayer Inductors

Size: 0603 … 1608Inductance: 0.3 … 1000 nH Rated current: 50 … 1000 mA

– Advanced monolithic structure isformed using multilayering and sintering process with ceramic and conductive materials for highfrequency

Size: 0402Inductance: 0.2 … 33 nH Rated current: 120 … 350 mATemperature: –55 … +125 °C

– Optimal product for fine-pitch circuits

Size: 0603Inductance: 0.6 … 120 nH Rated current: 80 … 1000 mATemperature: –55 … +125 °C

– Q is higher than in a conventionalproduct; particulary at more than800 MHz

High frequency applications such as mobile communication, high-frequency modules (PA, VCO, FEM), Bluetooth, WLAN, UWB and tuners


MagneticsMultilayer Inductors

EPCOSTDK

Series High frequency – SMD High frequency – Super High Q – SMD Signal line – Narrow tolerance – SMDMLK series MHQ series MLF-J series

Technicaldata

Features

Applications


Size: 0603 … 1005Inductance: 1 … 330 nHRated current: 70 … 500 mA

– Giga-spiral laminated structure– High self-resonant frequency – Limited decrease of Q in the

GHz band

Size: 0402 …1005Inductance: 1 … 150 nH Rated current: 400 … 1200 mA

– Achieves high Q characteristicsequivalent to an air-core wire woundinductor

– Inductance is provided in small increments, taking advantage of themultilayer technique

Size: 1608, 2012Inductance: 0.1 … 12 µH Rated current: 10 … 300 mA

– Inductance tolerance ±5% (J-tolerance)

– Temperature stress (drift variancepercentage) for soldering ±3%

High frequency applications such as mobile communications, high-frequency modules (PA, VCO, FEM), Bluetooth, WLAN, UWB and tuners

Signal processing in mobile communications, car audio, tuners,DVC

Series Signal line for standard circuits – For decoupling circuits – SMDSMD MLZ, MLZ-H seriesMLF, MLF-L series

Technicaldata

Features

Applications


Size: 1005 … 2012Inductance: 0.047 … 100 µHRated current: 2 … 300 mA

– Magnetically shielded configuration suitable for high-density mounting

– Industry’s best DC superimposition characteristics – Lowest DC resistance– Excellent effect mainly on the decoupling of

power circuits– Also suitable for audio lines, due to its low

DC resistance

Signal processing modules for mobile communicationsand tuners

Modules for mobile communications and consumer electronics

Size: 1005 … 2012Inductance: 0.1 … 100 µH Rated current: 30 … 1000 mA

Series Common-mode filters for CAN bus, Common-mode filters for CAN bus, Common-mode filters for BroadR-FlexRay – SMD FlexRay – SMD Reach / 2-wire ethernetACT1210 ACT45B, ACT45C, ACT45R series ACT1210L

Technicaldata

Features

Applications

Signal EMC Filters

Size (EIA): 1210 (3.2 x 2.5 mm) Rated inductance: 11 … 100 µH Impedance: 300 … 5800 V (10 MHz) Rated current: 0.15 … 0.25 A Temperature: –40 … +150 °C

– ACT1210 for CAN and FlexRay– Non-soldered internal construction

provides excellent heat resistance to ensure effective circuit boardmounting

– Robust lead frame termination– Qualified to AEC-Q200– Suitable for lead-free soldering

profiles acc. to JEDEC J-STD 020D

Size (EIA): 1812 (4.5 x 3.2 mm) Rated inductance: 11 … 100 µH Impedance: 300 … 5800 V (10 MHz) Rated current: 0.15 … 0.25 A Temperature: –40 … +150 °CTemperature: –40 … +125 °C (ACT45C)– ACT45B/C for CAN-Bus– ACT45R for FlexRay– Non-soldered internal construction




Size (EIA): 1210 (3.2 x 2.5 mm) Inductance: 100 and 200 µH Rated current: 70 … 0.15 mA Temperature: –40 … +125 °C

– ACT1210L for BroadR-Reach– Provides excellent balance

parameter (symmetry)– Non-soldered internal construction




Automotive electronics: CAN/FlexRaybus on space critical applications

Automotive electronics: CAN/FlexRaybus

Automotive electronics: CAN/FlexRaybus on space critical applications

Series Common-mode filters for BroadR- Data line chokes – SMD Data line chokes – SMDReach / 2-wire ethernet SIMDAD 1812 B82793C0…, B82793S0…ACT45L B82789C0…, B82789S0…

Technicaldata

Features

Applications

Signal EMC Filters

Size (EIA): 1812 (4.5 x 3.2 mm) Inductance: 100 and 200 µH Rated current: 100 mA Temperature: –40 … +105 °C

– ACT45L for BroadR-Reach– Provides excellent balance

parameter (symmetry)– Qualified to AEC-Q200– Suitable for lead-free soldering


Size (EIA): 1812Rated inductance: 11 … 100 µHRated current: up to 300 mATemperature: up to +150 °C

– For reflow soldering and gluing– Qualified to AEC-Q200– Suitable for lead-free

soldering profiles acc. to JEDEC J-STD 020D

Size: 9 x 6 x 4.8 mmRated inductance: 5 µH … 47 mHRated current: up to 1.2 ATemperature: up to +125 °C

– High inductance range– Qualified to AEC-Q200– Suitable for lead-free

soldering profiles based on JEDEC J-STD 020D



Automotive electronics: CAN/FlexRaybusIndustrial electronicsxDSL applications


MagneticsSignal EMC Filters

EPCOSTDK



EPCOSTDK

Series Double/quad chokes Chip beads for signal line – SMD Chip beads for signal line – HighB82792, B82794, MMZ series frequency, large impedance – SMDB82791, B82720 MMZ-E series

Technicaldata

Features

Applications

Signal EMC Filters

Rated inductance: 0.1 … 0.7 ARated current: 0.47… 68 mHRated voltage: 42 V

– SMD and PTH available– Very low stray inductance– Very good symmetry features

Size: 0402 … 2012Impedance: 10 … 2500 V (100 MHz)Rated current: 100 … 1500 mATemperature: –55 … +125 °C

– High reliability– Closed magnetic circuit structure– Low DC resistance structure of

electrode

Size: 0603 … 1005Impedance: 47… 2200 V (100 MHz) Rated current: 150 … 300 mA

– Broad-band impedance values forhigher frequency ranges

– High reliability– Closed magnetic circuit structure– Low DC resistance structure of

electrode

Telecom and automatization applications

Elimination of signal line noises for mobile communications, consumerelectronics, automotive electronics

Elimination of signal line noises for mobile communications, consumerelectronics

Series Chip beads for signal line – SMD Chip beads for power line – SMD Chip beads for power line – SMDHFxxACB series HFxxACC series MPZ series

Technicaldata

Features

Applications

Signal EMC Filters

Size: 2012 … 4532Impedance: 7 … 125 V (100 MHz)Rated current: 300 … 600 mA

– Can be applied to a wide range ofcircuits

– Use HF70, 50 and 30 materials

Size: 2012 … 4532Impedance: 7 … 125 V (100 MHz)Rated current: 1.5 A

– Effective EMC suppression over abroad bandwidth can be achieved byinserting into the DC power line on thecircuit board

Size: 0603 … 2012Impedance: 10 … 1000 V (100 MHz)Rated current: 0.5 … 6 A

– Best-in-class energy-saving in thelow DC resistance range

– No crosstalk with closed magneticcircuit structural design

Elimination of signal line noise for mobile communications, consumerelectronics, automotive electronics

Power line applicationsAutomotive electronics

Elimination of power line noise for mobile communications, consumerelectronics, automotive electronics



EPCOSTDK

Series Common beads for audio/USB1.1 3-terminal filters for signal line – SMD 3-terminal filters for signal line – SMDsignal line – SMD MEM-S/P, MEM-D series ACF seriesMCZ1210-D series

Technicaldata

Features

Applications

Signal EMC Filters

Size: 1210Impedance: 90 … 1000 V (100 MHz)Rated current: 50 mA … 0.5 A

– Compact size, low RDC(0.75 V max.)

– Capable of removing both commonand differential mode noise

– Closed magnetic circuit structure allows high-density installation, while preventing crosstalk betweencircuits

Size: 1608 … 2012Insertion loss: 20 dB (70 … 2000 MHz)

30 dB (70 … 2500 MHz) Rated current: 100 … 250 mA

– Multilayer chip EMC filter utilizing aT-type circuit

– High reliability– Closed magnetic circuit architecture

enables high-density installation andprevents crosstalk

– Highly effective noise suppression

Size: 3225Insertion loss: 25 dB (11 … 700 MHz)Rated current: 300 mATemperature: –25 … +85 °C

– T-type filter circuit is magneticallyshielded with ferrite: Superior attenuation characteristics

– Offers even greater attenuation characteristics when used in a stablecircuit on the ground

– Ideal for high-density circuit designspace

Elimination of power line noise for mobile communications and consumerelectronics

MEM-S/P series: general signal line(consumer, office applications)

MEM-D series: high-speed signal line(consumer, office applications)

Consumer electronicsOffice automation equipment Factory automation equipmentAutomotive electronics

Series 3-terminal filters for power line – SMD 3-terminal filter arrays for multi-line – 3-terminal feedthrough filters ACH series SMD for signal line – SMD

MEA series YFF Series Technicaldata

Features

Applications

Signal EMC Filters

Size: 3216Insertion loss: 25 dB (6 … 700 MHz)Rated current: 1.5 … 2 ATemperature: –40 … +125 °C

– Offers even greater attenuation characteristics when used in a stablecircuit on the ground

– Ideal for high-density circuit design

Size: 1210 … 2010Cut-off frequency: 50 … 500 MHzCapacitance: 4 … 36 pFRated current: 100 mA

– Array type: LC filter for 2 or 4 lines– Effective as a sensitivity suppression

technique– Post-filter processing, base oval

waveform signal– Suited for high-speed signal lines

Size: 0402 … 0805Temp. range: up to +125 ºC Rated voltage: 16 … 50 V Capacitance: 22 pF … 47 µF

– Optimized for noise bypass with signal source circuits

– Ideal for use at higher frequenciesdue to low parasitic inductance

Consumer electronicsOffice automation equipmentFactory automation equipmentAutomotive electronics

Mobile communicationsConsumer electronicsGeneral signal line (Cellular Band,DVB-H Band): MEA-L, MEA-LC, MEA-PEHigh-Speed signal line, RGB and signallines (Cellular Band, DVB-H Band): MEA-D, MEA-PH, MEA-LD, MEA-LE

Communications Consumer electronics Green energy



EPCOSTDK

Series Common-mode filters for automotive Common-mode filters for signal line – Common-mode filters for signal line –signal line – SMD SMD SMDACM series TCE series MCZ-AH, MCZ-CH series

Technicaldata

Features

Applications

Signal EMC Filters

Size: 2012Impedance: 90 … 360 V (100 MHz)Rated current: 220 … 400 mATemperature: –40 … +105 °C– High reliability– Impedance variation: 4 types of

impedance values are prepared to correspond to the various applications

– Suppresses the common mode EMIwithout waveform distortion

Size: 0806 … 1608Impedance: 12 … 90 V (100 MHz)Rated current: 0.10 A

– Component can be used for suppressing common-mode noiseand ESD

– Wide bandwidth (cut-off frequency3 GHz min.) for differential mode


– Minimum effect for high-speed differential signals due to wide bandwidth for differential mode

– Suppresses radiated emissions

MCZ-CH series:– Differential mode signal transmission

band has been extended to 3.5 GHz– Differential mode characteristic

impedance is 100 V

Radiation noise suppression for car multimedia interface (MOST, USB 2.0, IDB-1394)

Ultra high-speed differential signal line(HDMI, DVI, Display port, USB 3.0)

MCZ-AH series: High-speed differentialsignal line (USB 2.0, LVDS)

MCZ-CH series: Ultra high-speed differential signal line (HDMI, DVI,Display port, USB 3.0)

Series 3-terminal feedthrough filters for Common-mode filters for signal line – Common-mode filters for signal line –power line – SMD SMD SMDYFF Series TCM-G series ACM series

Technicaldata

Features

Applications

Signal EMC Filters

Size: 0402 … 1206Temperature: up to +125 ºC Rated voltage: 4 … 50 V Capacitance: 0.1 µF to 22 µF

– Optimized for noise bypass withpower source circuits

– Ideal for use at higher frequenciesdue to low parasitic inductance

Size: 0403 … 1608Impedance: 12 … 200 V (100 MHz)Rated current: 0.1 Idc A

– Thin-film common-mode filter with alarge bandwidth

– Suppresses radiation noise due tocommon-mode noise, without affecting the transmission of high-speed differential signals by realizinga higher cut-off frequency


– Miniaturized wire-wound chip-typefilter

– Extremely effective noise suppression

– Minimal effect upon high speed signals, due to low differential modeimpedance

Communications Consumer electronics Green energy

High-speed differential signal line (USB 2.0, LVDS)

High-speed differential signal line (USB 2.0, LVDS)



EPCOSTDK

Series Common-mode filters for power line – Common-mode filters for automotive Common-mode filters for power line –SMD power line – SMD SMDACM series ACM-V series ACP3225 series

Technicaldata

Features

Applications

Signal EMC Filters

Size: 4520 … 1513Impedance: 180 … 1400 V (100 MHz)Rated current: 1.0 … 10 A

– Noise is strongly suppressed– Best-in-class highest current

handling up to 10 A– Lightweight choke coil

Size: 4520 … 1211Impedance: 230 V (100 MHz) Rated current: 1 … 8 A Temperature: –40 … +125 °C

– High impedance characteristic hasachieved superior common modenoise suppression

– Products have serialized a large current product up to 8 A correspon-ding to various DC power lines

– Due to the low profile design, it issuitable for surface mounting

Size: 3225Impedance: 1000 V (100 MHz) Rated current: 1.2 A

– Capable of achieving reduction inpower consumption and improve-ment of noise suppression effect,due to its low DC resistance andhigh common-mode impedance

– Low profile and compact shapemakes it suited for surface mounting

Used for power line noise suppressionfor electronic devices

Suitable for portable devices

Automotive: Common-mode noise countermeasures for DC power lines of electronic control equipment

Multimedia equipment in automotiveapplications

Power line noise suppression of electronic devices

Noise suppression of adapter lines or battery lines of PCs

Series Clamp filters (Ferrite Cores with case) Clamp filters (Ferrite Cores with case)ZCAT, ZCAT-A, ZCAT-B, ZCAT-D/DT for ECU in automotiveseries ZCAT-V-BK series

Technicaldata

Features

Applications

Signal EMC Filters

Impedance range: 20 … 80 V (10 … 100 MHz)50 … 150 V (100 … 500 MHz)30 … 35 V (50 … 500 MHz)Temperature : –40 … +85 °C

– Unique plastic case ensures simple, convenient installation and features a self-holding mechanism

– Ferrite core provides excellent absorption of high-frequency EMC and is highly effective as countermeasure against common-mode EMC

– Can easily be attached without cutting the cable– Plastic case has a self-sustaining mechanism that

prevents slipping on the cable after being clamped– Excellent high-frequency noise absorption effect– Works against common-mode noise, allowing for noise

suppression without affecting signal quality

CommunicationsConsumer electronicsPCs

ECUs in automotive

Impedance range: 120 … 140 V (100 MHz)Temperature : –40 … +125 °C


MagneticsPower EMC Filters and Chokes

EPCOSTDK

Series Feedthrough capacitors IEC inlet filters 2-line filters for single-phase orFeedthrough filters B8477* DC applicationsB85121, B85321 B8411…, B84142

Technicaldata

Features

Applications

Power EMC Filters and Chokes

Rated voltage: 110 … 600 V AC/ V DCRated current: 16 … 500 A

Feedthrough capacitorsRated capacitance: 0.0025 … 4.7 µF

Feedthrough filtersRated capacitance: 2x 0.0025 … 2x 4.7 µF

– MKP technology (dry, self-healing)– Solderless production technology– Terminals as axial leads, screw

connectors, soldering tags or tabconnectors

Rated voltage: 250 V AC/DCRated current: 1 … 20 A

– IEC connector– Version with fuse holder– Version with fuse holder and switch– Medical versions

Rated voltage: 250 … 520 V ACRated voltage: 250 … 1500 V DCRated current: 0.5 … 1600 A

– Modular SIFI filter system– One or multi-stage filters– High-voltage versions

CommunicationsShielded roomsPower suppliesMedical appliances

Communications IndustrialMedical appliances Power supplies

CommunicationsIndustrial, solar invertersMedical appliancesPower supplies

Series Filters for three-phase systems Converter chokes Output filters, LCL filtersB84143, B84144 B86305, B86301 B84143V …, B84143G/Q …

Technicaldata

Features

Applications


Rated voltage: 440 … 760 V ACRated current: 8 … 2500 A

– Filters without/with neutral line– One or multi-stage– Compact filters

Rated voltage: 520 V ACRated current: 4 … 1500 A

– Line reactors– dv/dt chokes– DC chokes

Rated voltage: 440 … 760 V ACRated current: 4 … 400 AClock frequency: 2.4 … 16 kHz

– Sine-wave output filters– Sine-wave output filters, low cost– Sine-wave EMC output filters

(SineFormer)– LCL filters

Industrial applicationsSolar and wind powerMedical appliancesFrequency converters and power supplies

Industrial applicationsFrequency convertersSolar and wind powerLCL filters

Industrial applicationsFrequency converters


MagneticsPower EMC Filters and Chokes

EPCOSTDK

Series Ring core chokes Ring core chokes D core chokes(current compensated) (current compensated) (current compensated)B82725S … B82726E/S …, B82727E … B82724J*U* B82731 … B82734

Technicaldata

Features

Applications


Rated current: 5.4 … 56 ARated inductance: 0.19 … 7.8 mH Rated voltage: 250 … 300 V AC

300 … 1000 V DC (DC link)

– High resonance frequency – Approx. 1% stray inductance for

symmetrical interference suppression

– On baseplate, winding wire servesas solder terminal

Rated current: 4.3 … 10 ARated inductance: 0.5 … 6.8 mH Rated voltage: 250 V

– High resonance frequency owing tospecial winding technique

– Approx. 1% stray inductance forsymmetrical interference suppression

– Plastic case with terminals– High rated temperatures

Rated inductance: 3.3 … 100 mHRated current: 0.35 … 4.6 ARated voltage: 250 V

– High resonance frequency due to 2-section winding

– Approx. 1% stray inductance for symmetrical interference suppression

– Low leakage due to closed coreshape

– High pulse strength– Low whirring noise– Low-height horizontal versions

Power supplies of high power applications, such as solar inverters, drives, household appliances

Inverter applications in home appliance, e.g. washing machine, dryer

Power suppliesBallasts

Series Filters for shielded rooms EMC services Ring core chokes B84299, B84312 (current compensated)

B82720 … B82725, B82791Technicaldata

Features

Applications


Rated voltage: 100 … 690 V ACRated voltage: 100 … 1000 V DCRated current: 0.1 … 1600 AInsertion loss: >100 dB from 14 kHz … 40 GHz

– Power line filters– Filters for data, telephone or control

lines

EMC laboratory offerscomprehensive consulting,pre-compliance investigations andconformity testing

– Accredited laboratory– In-house or on-site testing– Measurement of conducted and

radiated emissions

Rated current: 0.25 … 16 ARated inductance: 0.2 … 100 mHRated voltage: 250 V

– High resonance frequency owing tospecial winding technique

– Approx. 1% stray inductance for symmetrical interference suppression

– Potted versions possible– B82720 also available in SMD– Plastic case with terminals

EMC laboratoriesShielded rooms

Industrial applicationsConvertersSolar and wind power

Power supplies


MagneticsPower EMC Filters and Chokes, Ferrites

EPCOSTDK

Series I core chokes Ring core (iron powder) chokes E, EFD, ETD coresB82502 … B82523 B826 …

Technicaldata

Features

Applications

Power EMC Filters and Chokes Ferrites

Rated inductance: 0.015 … 47 mHRated current: 0.5 … 95 ARated voltage: 400 … 500 V

– Low power dissipation– Broadband interference suppression– Core: laminated iron-silicon– Single and double chokes available– Compact design

Rated inductance: 0.033 … 20 mHRated current: 0.3 … 6 ARated voltage: 250 V

– Iron powder core– Single and double chokes– High thermal stability – High differential attenuation at low

frequencies

Core shape: E5 … E80ETD29 … ETD59EFD15 … EFD30

Material: N87, N97

– Wide range of core shapes, sizesand accessories

– Cost optimized

Power supplies of high power applications

PFC and reduction of harmonics in power supplies

Power suppliesAC/DC convertersDC/DC converters

Series U core chokes Frame core chokes (FC) Ring core chokes, triple/quad(current compensated) (current compensated) (current compensated) B82730 B82732F …, B82733F… B8274 … B8276

Technicaldata

Features

Applications


Rated inductance: 0.33 … 15 mHRated current: 0.4 … 2.6 ARated voltage: 300 V

– High resonance frequency– Approx. 1.3% stray inductance for

symmetrical interference suppression– Low whirring noise– Low saturation effects– Low-height horizontal versions feasible

on request– Compact design

Rated inductance: 10 … 100 mHRated current: 0.45 … 2.3 ARated voltage: 250 V

– Closed magnetic circuit with frame construction

– 4-section winding– High stray inductance, excellent

differential mode suppression– High pulse-handling capability– Low height allows usage in lamp

ballasts– Optional: magnetic bypass to increase

stray inductance

Rated inductance: 0.35 … 6.2 mHRated current: 6 … 62 ARated voltage: 440 … 690 V

– High power handling– Available in plastic case (fully potted)

or on baseplate

Compact power suppliesBallastsHousehold appliances

Power suppliesBallasts

Power supplies of high power applications, such as solar inverters,drives


MagneticsFerrites

EPCOSTDK

Series RM cores EP, EPX cores - SMD P cores

Technicaldata

Features

Applications

Ferrites

Core shape: RM4 … RM14Material: N49, N87, N97, K1, M33, N48

– Without center hole– Compact design– Accessories available

Core shape: EP5 … EP20EPX7 … EXP10

Material: T38, T57, T66

– Low hysteresis loss coefficient– Low THD

Core shape: P3.3 … P70Material: K1, M33, N48, N22, N30, T38

– Without center hole– Optimized shielding– Accessories available


xDSL applications Signal transformersProximity switches

Series ELP, ER, EQ cores PQ cores U, PM cores

Technicaldata

Features

Applications

Ferrites

Core shape: ELP14 … ELP64ER9.5 … ER32EQ13 … EQ30

Material: N49, N87, N92, N95, N97

– Flat mounting height– Planar solution– Board integrated

Core shape: PQ16 … PQ50Material: N49, N87, N92, N95, N97

– Compact design– Ferrite cores for power transformers

and chokes– Bobbins available

Core shape: U93 … U141PM50 … PM114

Material: N27, N87, N97

– Max. transmissible power– Max. magnetic cross section– Large volume cores– Accessories for PM cores available



MagneticsFerrites

EPCOSTDK

Series Ring cores Ferrite cores for EMI suppression Ferrite cores for switchingpower supplies

Technicaldata

Features

Applications

Ferrites

Core shape: R2.5 … R202Material: K10, T57, N30, N87, T35,T37, T38

– Parylene-coated– Epoxy-coated

Core shape: BB, MH, RID, RH, RU, SH, SP, SU Initial permeability (typ.): 45 … 50 000 µiNiZn ferrites

– Suitable for one-hole ferrite beads– Various materials, shapes and

packaging styles available

Core shape: EE, EEM, EF, EI, EIR, EL,ELT, EP, EPC, ER, ETD, LP, PQ, PQI,RM, TInitial permeability (typ.):2200 … 12 000 µiMaterial: PC47, PC90, PC95, HS72,HS10, HS12MnZn ferrites– Suitable for various transformers of

general-purpose DC/DC converters

Noise suppression for video, acoustic,office automation and communicationequipment, automotive electronics


Main transformersDrive transformersChoke coils

Series Ferrite cores for Large size ferrite cores Ferrite cores for coilstelecommunication for high power

Technicaldata

Features

Applications

Ferrites

Core shape: P, RM, EP, EPC, ER, EE,EEM, TInitial permeability (typ.):3300 … 15 000 µiMaterial: H5A, H5B2, H5C2, H5C3,HP5, DNW45 MnZn ferrites

– Toroidal cores are suitable for pulsetransformers and sensors

– Epoxy and paraxylylene insulationcoating is available

Core shape: EC, EE, EI, EIC, PQ, SP, T, UUInitial permeability (typ.): 1800 … 2300 µiMaterial: PE22, PC40, PE90MnZn ferrites

– Large size ferrite cores developed forreactors and transformers used inhigh power units

Initial permeability (typ.): 1 … 1500 µi Material: GT1, GT2, GT3, GT4, GT5,GT6, GT7, GT8, GT9, GT10, L2H, L5,L6, L6N, L7H, L8F, L9H, L11H, L17H,L18H, L20H, T2F, T6F, T7F, T9F, Sy20,SY22 NiZn ferrites

– Mountable with lead-free soldering(+260 °C max.)

– Excellent common-mode noise suppression

– High-quality and wide-band ferritecores for LAN

FiltersSensorsTransformers

Transfomers (high frequency inductive heater, UPS, EV, automated warehouse)

Reactor choke (general purpose inverters, trains)

Inductors, transformers, antennas, andother coil products


MagneticsNoise Suppressing Sheets

EPCOSTDK

Series Magnetic sheets for noise suppression Magnetic sheets for noise suppressionFlexield – IFL12 Material Flexield – IFL10M Material

Technicaldata

Features

Applications

Noise Suppressing Sheets

– Highly flexible and shock-resistant– Noise suppression across a wide frequency range– Excellent flexibility in fabrication

High µ / High characteristicDimensions: 300 x 200 mmThickness: 0.05, 0.1, 0.2 mmRecommended frequency range: 5 MHz … 3 GHzInitial permeability at 1 MHz typ: 180 µiResistivity (Ω/square) min: 100 k

High µ / High frequency bandDimensions: 300 x 200 mmThickness: 0.025, 0.05, 0.1, 0.2 mmRecommended frequency range: 10 MHz … 3 GHzInitial permeability at 1 MHz typ: 120 µiResistivity (Ω/square) min: 1 M

Noise reduction for flexible cables used in mobile devicesReduction of noise emitted from a wide variety of electronic devices (including noise from CPU)Reduction of specific absorbed radiation (SAR) from cellular phonesReduction of internal EMI (resonance, crosstalk) inside a shielded casing

Series Magnetic sheets for RFID Magnetic sheets for RFIDFlexield – IFL04 Material Flexield – IBF15 Material

Technicaldata

Features

Applications

Noise Suppressing Sheets

– Highly flexible and shock-resistant– Highly effective – Extensive line-up of sizes and dimensions– Excellent permeability– Excellent magnetic convergence

High performance Dimensions: 300 x 200 mmThickness: 0.05, 0.1, 0.2 mmInitial permeability at 13.56 MHz: 45 µ’ / 1.3 µ’’Resistivity (Ω/square) min: 10 k

Ferrite PlateHigh permeability, Low dissipation Dimensions: 125 x 125 mmThickness: 0.1, 0.18 mmInitial permeability at 13.56 MHz: 150 µ’ / 5 µ’’Resistivity (Ω/square) min: 1 G

For improving reception performance of RFID readers/writersIntegrating IC cards with metalIntegrating IC tags with metalImproved antenna reception sensitivity


SAW ComponentsMEMS Devices for Mobile Communications and Information Technology,SAW Filters, Duplexers for Base Stations, Small Cells, Femto Cells and Trunked Radio

EPCOSTDK

Series MEMS microphones – SMD MEMS pressure and humidity sensors – SMD

Technicaldata

Features

Applications

MEMS Devices for Mobile Communications and Information Technology

Up to 65 dB (A) SNRAcoustic Overload Point (AOP) up to 135 dB SPL

– Analog or digital– Very small size– Excellent EMI shielding– Very high PSR– Omnidirectional

– Factory calibrated– I2C and SPI interface– Very small size– High accuracy– Low noise

Handsets/accessoriesNotebooks MP3 players Cameras

HDDsNavigation devicesAltimeters

Barometric pressure sensorRelative humidity sensor300 … 1100 hPa16 … 20 bit resolution

Series IF filters ceramic – SMD RF filters ceramic – SMD RF filters CSSP

Technicaldata

Features

Applications

SAW Filters, Duplexers for Base Stations, Small Cells, Femto Cells and Trunked Radio

Center frequency:70 … 700 MHzUsable bandwidth:0.2 … 100 MHzSMD package size (EIA):5050, 7050

– Very good nearby selectivity– Bandwidths up to full LTE band– Customized design

Center frequency:250 MHz … 3.5 GHzUsable bandwidth:5 … 200 MHzOutput impedance: 50 Vor acc. customer requestSMD package size (EIA):3030, 3838, 5050

– Low insertion loss: e.g. 1.3 dB (typ.)– High ultimate rejection

Center frequency:700 MHz … 2.7 GHzUsable bandwidth:10 … 75 MHzCSSP package size (EIA):1411, 1814, 2520

– Low insertion loss: e.g. 1.9 dB (typ.)– High ultimate rejection– Matched duplexer with standard and

mirror pinning– 2-in-1 filter and diplexer– Single filters for UL/DL/Snif

Base stations (macro, micro, pico cells) Base stations (macro, micro, pico cells)Tetra, PMR

Femto cells (residential femto cells, enterprise femto cells, indoor picocells), Small cells


SAW ComponentsSAW Filters for Automotive and Industrial, SAW Filters for Multimedia

EPCOSTDK

Series SAW resonators – SMD Wideband filters – SMD Narrowband filters – SMD SAW filters and duplexers for automotivetelematics – SMD

Technicaldata

Features

Applications

SAW Filters for Automotive and Industrial

Center frequency:300 MHz … 1.2 GHzCenter frequency tolerance:25 … 300 kHz SMD package size (EIA):2520, 3030, 3550

– 1-port resonators– 2-port resonators– High Q-factor, low motion

resistance – Automotive reliability

AEC-Q200 Grade 1

Center frequency:72.54 MHz … 2.5 GHzUsable bandwidth:0.6 … 97 MHzOutput impedance: 50 VSMD package size (EIA):1411, 3030, 3838, 5070

– Low insertion loss:down to 0.6 dB

– High ultimate rejection– Automotive reliability

AEC-Q200 Grade 1 or 3

Center frequency:169,5 … 930 MHzUsable bandwidth:0.1 … 1.6 MHz SMD package size (EIA):2520, 3030, 3838, 5050

– Low temperature drift– Very good near attenuation– Multichannel filters– Diplexers/Triplexers for

multiband systems– Automotive reliability

AEC-Q200 Grade 1

Center frequency:710 … 2140 MHzUsable bandwidth:25 … 93 MHz SMD package size (EIA):1411, 2016, 2520, 3030, 3025

– Filters and duplexers for all common mobile com-munication frequencies2G/3G/4G and GNS systems

– Automotive reliability AEC-Q200 Grade 3

Automotive RKE, TPMSWireless transmitters inhome comfort and industrial applications

Automotive telematicsNavigation devicesToll systems

Automotive RKETPMSCar alarm systems

RKE multichannel receivers,home comfort and industrialapplications, smart metering,SDARS, DMB

Series CSSP3 – SMD Ceramic – SMD

Technicaldata

Features

Applications

SAW Filters for Multimedia

Low loss RF band-stop filter for ISDB-T 1seg, DVB-H, DVB-T, CMMB and SBTVDLow insertion lossLow amplitude ripple and group delay rippleUnbalanced to unbalanced operation

– Package size 1.4 x 1.1 mm– Maximum height of 0.45 mm

– Package size 3.0 x 3.0 x 1.1 mm– Maximum height of 1.225 mm

Mobile TV Satelite TV with channel stacking switchSet Top BoxCable modemMobile TV

Low loss RF filterLow insertion attenuationLow amplitude rippleNo matching network requiredUnbalanced to balanced operation


SAW ComponentsSAW Filters, Duplexers and Modules for Cellular Communications

EPCOSTDK

Series Front-end modules with 4 integrated duplexers – SMD Complementary wireless – SMD(FEMiD) D5201

Technicaldata

Features

Applications

SAW Filters, Duplexers and Modules for Cellular Communications

Typ. insertion loss: 1.2 … 3.4 dB (dep. band) Typ. VSWR: 1.5:1Typ. Isolation: > 55/50 dB (Tx/Rx)Harmonic attenuation: > 30 dB Max. input power: 29 dBmSMD package size: 5.0 x 4.0 x 1.0 mm

– Supports 4 GSM bands (850/900/ 1800/1900), 4 WCDMA/LTE bands (I, II, V, VIII) and 4 other bands from additional aux. ports

– Integrates all GSM filters, Tx low pass filter, switch and decoder

– Integrates WCDMA DPX band (I, II, V, VIII)– Integrated ESD protection acc. IEC-61000-4-2

– Navigation (GPS and Glonass), WLAN and Bluetooth– Very high isolation– GPS/WLAN multiplexer– Wafer level package

Mobile phones, tablets and data cards supporting GSM and WCDMA/LTE

Mobile phones, tablets, information technology, navigation devices

Very low IL, e.g. 0.45 dB (typ.)Up to 100 bar molding8 kV ESD protected

Series Mobile communications – SMD Diversity front-end modules – SMD(DivFEM) D5219

Technicaldata

Features

Applications

SAW Filters, Duplexers and Modules for Cellular Communications

Isolation: up to 60 dB Height: 0.42 … 1.00 mm Duplexer size: down to 1.8 x 1.4 mmFilter size: down to 1.1 x 0.9 mm

– Matched WCDMA/LTE duplexer– Diplexed GSM 2in1 and 4in1 filters– Single filters for all mobile communication standards– Special low profile products for modules

– Supports WCDMA/LTE bands (1/4, 25, 3, 26(5), 7, 8, 13,17, 20, 29) and US carrier aggregation

– Integrates 9 WCDMA/LTE DRx SAW filters for bands 1/4, 2, 3, 26(5), 7 8, 13, 17, 20, 29, MIPI SP7T switch and decoder

– Integrated ESD protection acc. IEC-61000-4-2

Mobile phones, tablets and data cards supporting GSM, WCDMA/LTE and TDD

Mobile phones, tablets and data cards supporting GSM and WCDMA/LTE

Typ. insertion loss: 1.9 … 3.4 dB (dep. band) Typ. VSWR: 1.3:1 … 1.9:1 (dep. band)Typ. Tx suppression: > 45 dB SMD package size: 4.7 x 3.9 x 1.0 mm


SAW ComponentsModules for Information Technology, Ceramic and Thin-Film RF Components

EPCOSTDK

Series R053 – SMD R054 – SMD R057 – SMD

Technicaldata

Features

Applications

Modules for Information Technology

SiP Tri-Core solutionGPS/BT/FM Module based on Texas InstrumentsNL5500Package size: 6.7 x 7.5 x 1.2 mm (typ.)

– Bluetooth 4.0 – BT EDR (2 and 3 Mbps)– GPS– FM (Tx/Rx)– Fully shielded and tested SiP

SiP Quad-Core solutionWLAN/GPS/BT/FM Module based on Texas InstrumentsWL1283Package size: 11.9 x 9.5 x 1.2 mm (typ.)

– WLAN 802.11a– WLAN 802.11 b/g/n– Bluetooth 4.0 – BT EDR (2 and 3 Mbps)– GPS– FM (Tx/Rx)– Fully shielded and tested SiP

Center frequency: 836 … 1960 MHzUsable bandwidth: 25 … 93 MHz Package size (EIA): 1411, 2520, 3030,3025

– WLAN 802.11 b/g/n– Bluetooth 4.0 – BT EDR (2 and 3 Mbps)– GPS– FM (Tx/Rx)– Fully shielded and tested SiP

Mobile phonesHandheld Internet devices

Series Multilayer band pass filters – SMD Multilayer band pass filters – SMD Multilayer band pass filters – SMDDEA series (balance output type) (balance output type)

DEA series DEA seriesTechnicaldata

Features

Applications

Ceramic and Thin-Film RF Components

Size (l x w x t): 1.6 x 0.8 x 0.6 … 2.5 x 2.0 x 1.5 mm (max.)

– Compact lightweight and thin type– Low loss in the passband– High attenuation in the attenuated

band



band– IC impedance compatible design

available


– Compact lightweight– High performance

2.4 GHz WLAN/Bluetooth5.0 GHz WLAN5.0 GHz Digital cordlessWiMAX up to 3.6 GHz

2.4 GHz WLAN/Bluetooth2.5 GHz WiMAX5.0 GHz WLAN

3.5 GHz WiMAXZigBee


SAW ComponentsCeramic and Thin-Film RF Components

EPCOSTDK

Series Thin-film band pass filters – SMD Multilayer low pass filters – SMD Thin-film low pass filter – SMDTFSB series DEA series TFSL series

Technicaldata

Features

Applications


Size (l x w x t): 1.0 x 0.5 x 0.3 mm

– Small size– Low profile



band

Size (l x w x t): 0.65 x 0.50 x 0.25 mm

– High performance– High repeatability– Ultra-minature and low-profile

2.4/5.0 GHz WLAN/Bluetooth DVB-H/ISDB-T GSM900GSM850/GSM900 TxDCS DCS/PCS GSM/DCS/PCS Tx & Rx PCS Tx & Rx2.4 GHz WLAN/Bluetooth5.0 GHz WLANWiMAX

2.4 GHz WLAN/BluetoothCellular

Series Multilayer high pass filters – SMD Multilayer phase shifters (delay lines) – Multilayer diplexers – SMDDEA series SMD DPX series

DEA seriesTechnicaldata

Features

Applications




band

Size (l x w x t): 1.0 x 0.5 x 0.52 mm (max.)

– Compact lightweight and thin type– Low loss– Phase can be shifted according to

the frequency band of each system



band

2.4 GHz WLAN/Bluetooth DCS/PCSGSM800

GSM850/900/DCS/PCS Tx & RxGSM850/900/PCS Tx & Rx/GPSGSM850/PCS Tx & RxWCDMA800/WCDMA2000WCDMA800/WCDMA1900GPS & 2.4 GHz/Bluetooth2.4 GHz WLAN/Bluetooth2.4/5.0 GHz WLAN WiMAXUWB



EPCOSTDK

Series Multilayer balun transformers – SMD Thin-film balun transformers – SMDHHM series TTB series

Technicaldata

Features

Applications



– Compact lightweight and thin type– Low loss

– Optimal, thin-film chip balun transformer for 50 to 200 Vwith low loss at DVB-H/T and ISDB-T frequency bands(174 to 860 MHz)

GSM850 Tx & Rx GSM900 Tx & Rx DCS Tx & RxPCS RxWCDMA Tx & RxDCS/PCS Tx & Rx2.4 GHz WLAN/Bluetooth5.0 GHz WLAN WiMAXUWBGSM LOCAL DVB-H/ISDB-TLTEWide band balun

DVB-H/TISDB-T

Size (l x w x t): 0.85 x 0.65 x 0.4 … 1.6 x 0.8 x 0.4 mm

Series Thin-film diplexer – SMD Triplexer – SMDTFSD series TPX series

Technicaldata

Features

Applications


Size (l x w x t): 1.0 x 0.5 x 0.3 mm

– Ultra-small form-factor– Low-loss type– High-attenuation types

– Flexible band combinations– Low loss– High isolation

2.4 GHz WLAN/Bluetooth 5 GHz WLAN

GPS/2.4 GHz WLAN/Bluetooth 5 GHz WLAN/Cellular




EPCOSTDK

Series Wound chip baluns – SMD Thin-film balun transfomer – SMDATB series TFSZ series

Technicaldata

Features

Applications


Size (l x w x t): 2.0 x 1.2 x 1.0 mm … 3.2 x 2.5 x 2.3 mm

– Chip balun transformer developed for 50, 75 impedance system

– Impedance ration 1:1

– Low loss– Wide frequency line-up– Ultra-minature and low-profile

Tuner for TV, mobile devices (e.g. DVB-T/H, ISDB-T)Power divider for STB and tuners

For 2300 … 2690 MHz (50 … 100 V)For 1930 … 1990 MHz (50 … 100 V)

Size (l x w x t): 0.65 x 0.50 x 0.25 mm

Series Multilayer directional couplers – SMD Multilayer directional couplers (Dual-Band) – SMDHHM series HHM series

Technicaldata

Features

Applications



– Compact lightweight and thin type– Low loss– High isolation

– Compact lightweight and thin type– Low loss– High isolation

GSM900 Tx; DCS TX;PCS; PCS Tx; GSM/DCS Tx GSM/DCS/PCS Tx GSM850/DCS/PCS Tx GSM850/GSM900 Tx GSM850/GSM Tx; WCDMA Tx; DCS/PCS Tx; PDC1500 Tx;GSM850/PCS Tx2.4 GHz WLAN2.4 GHz WLAN Divider5 GHz WLAN

GSM850/DCS/PCS Tx

Size (l x w x t): 2.0 x 1.25 x 0.95 mm


SAW ComponentsCeramic and Thin-Film RF Components, LTCC Substrates for LED

EPCOSTDK

Series Thin-film directional couplers – SMD Multilayer chip antennas – SMDTFSC series ANT series

Technicaldata

Features

Applications


Size (l x w x t): 0.65 x 0.50 x 0.25 mm

– Wide-band– Cellular attenuators included– Ultra-minature and low-profile

– Suitable for installation on modular substrates– Monopole type allows high acquisition

2.4 GHz WLAN 2.4 GHz WLAN/Bluetooth: Single and Dual BandGPS/2.4 GHz: Dual BandIEEE802.11 a/b/g/n

Size (l x w x t): 1.6 x 0.8 x 0.4 mm, 8.0 x 3.0 x 1.0 mm

Series LTCC substrates

Technicaldata

Features

Applications

LTCC Substrates for LED

Integrated ESD protectionIEC 61000-4-2: level 4 with 8 kV contact Panel format 8 x 8"

– Thermal conductivity: > 25 W/mK– Mounting techniques: compatible with most standards

– flip mount– wire bond– glue– solder

– Surface finishing: Ag, Au, Cu variants available

Bare die LEDs LED components and LED modules


Micro Modules Substrates with Built-in ICs, Products Utilizing with SESUBBluetooth V4.0 Smart Single Mode Module

EPCOSTDK

Series SESUB-PAN-T2541

Technicaldata

Features

Applications

Bluetooth V4.0 Smart Single Mode Module

Communication standards: 2.4 GHz Bluetooth V4.0 low energyWireless output power: 0 dBm typ.Communication range: 10 m*Interface: UART/SPI/I2C/GPIO/ADC

* Line-of-sight distances. Depending on antenna properties.

– Micro size (4.6 × 5.6 × 1.0 mm) ideal for wearable devices– Communicable with Bluetooth Smart Ready compatible devices– Separate antenna type that provides more flexibility for product design

– Health care, sports and fitness devices– Wearable computers– Home and entertainment devices– PC accessories


Piezo and Protection DevicesPiezo Actuators for Automotive, Piezo Receivers, Buzzers

EPCOSTDK

Series Piezoelectric receiver Piezoelectric buzzersRU PS

Technicaldata

Features

Applications

Piezo Receivers Buzzers

Sound pressure: 108 dB ±3Capacitance: 60 nF ±30%Maximum input voltage ERMS: 5 V (Ep-p:14 V)Operating temperature: –20 … +70 °COperating humidity RH: 10 … 80%Terminal construction: Lead wire 10 … 75 MHzCSSP package size (EIA): 1411, 1814, 2520, 3025

– Compact, thin sounding body using unimorph piezoelectric vibration plate

– No leakage flux

Pin terminal/lead, without oscillator circuit– High-performance buzzers that employ unimorph

piezoelectric elements– Designed for easy incorporation into various circuits– Extremely low power consumption in comparison to

electromagnetic units– Same part can serve as both a musical tone oscillator

and a buzzer

Mobile communications Washing machines, computer terminals, devices withspeech synthesis output

Sound pressure: 60 … 90 dB(A)/10 cm min. (2 … 4 kHz)

Series Cu actuators 30 mm Injection actuators 30 mm Injection actuators 45 mm

Technicaldata

Features

Applications

Piezo Actuators for Automotive

Displacement: 40 µm Driving voltage: 160 V Max. temperature: up to +170 °CUseful life: > 3E9 cycles

– Proprietary piezo technology with copper inner electrodes

– Stress release technology

Displacement: 40 µm Driving voltage: 160 V Useful life: > 1E9 cycles

– AgPd technology

Displacement: 60 µm Driving voltage: 160 VUseful life: > 1E9 cycles

– AgPd technology

Diesel injection systems Diesel injection systems Gasoline injection systems


Piezo and Protection DevicesBuzzers, Surge Arresters

EPCOSTDK

Series Electromagnetic buzzers Electromagnetic buzzers Electromagnetic buzzers – SMDSD SDC SDR

Technicaldata

Features

Applications

Buzzers

Sound pressure:80 … 85 dB(A)/10 cm min.(2048 … 4096 Hz)

– Pin type terminal construction enables direct mounting onto printed circuit boards

Sound pressure:85 dB(A)/10 cm min. (1900 … 2400 Hz) Operating voltage: 4 … 8 V

8 … 16 V

– Built-in oscillator circuits: output canbe produced by merely connecting to a DC power supply

– Circuitry utilizes chip-type components for significantly reduced size and high reliability

Frequency: 2670 HzSound pressure level (typ.): 97 dB(A)/10 cm Sound pressure level (min.):88 dB(A)/10 cm Rated current (max.): 85 mA (ave) DC resistance (typ.): 16 VOperating temp.: –40 … +85°C

– Without oscillator circuit – High output level of sound pressure

due to high quality parts (yoke andmagnets)

– Good frequency response and high quality sound

Clocks, travel watchesKeyboardsToysAlarms of automotive equipment

PCs Office automation equipment Medical appliances Household appliances

Mobile phonesPagers

Series S20, S30, S50, S80 – SMD LN8 – Arrester stack – SMD EHV

Technicaldata

Features

Applications

Surge Arresters

DC spark-over voltage: 90 … 500 V Size and footprint (l x w x h):S20: 3.2 x 1.6 x 1.6 mmS30: 4.5 x 3.2 x 2.7 mmS50: 5.7 x 5 x 5 mmS80: 6 x 8.4 x 8.4 mmNom. discharge current 8/20 µs: 0.5; 2; 5; 20 kA

– 2-electrode square design– SMD mounting– Low capacitance– High insulation resistance

Max. DC operating voltage: 60 VNom. discharge current 8/20 µs: 20 kANom. discharge current 10/350 µs: 4 kASize and footprint (l x w x h): 16.3 x 8.4 x 9.5 mm

– 2-electrode stacked surge arrester– SMD mounting– Excellent follow current limiting

characteristic

DC spark-over voltage: 2500 … 4500 V Max. discharge current 8/20 µs: 5 kASize: Ø 6 x 7 mm

– High voltage surge arrester– High insulation resisitance– Very small size

Overvoltage protection in telecommunication appliances, xDSL modems, cable modems, electronic circuits

Protection of DC power supply circuitsin telecommunication systems

AC power supply unitsPhotovoltaic systemsAutomotive (electric and hybrid vehicles)


Piezo and Protection DevicesSurge Arresters

EPCOSTDK

Series T8 – with failsafe T9 – SMD with and w/o failsafe TQ90 – SMD

Technicaldata

Features

Applications

Surge Arresters

DC spark-over voltage: 90 … 600 V DCNom. discharge current: 10 kASize: Ø 8 x 10 mm

– 3-electrode arresters with failsafe– High discharge current– High insulation resistance

DC spark-over voltage: 75 … 420 V DCNom. discharge current: 5 kASize: Ø 5 x 7.6 mm

– 3-electrode arresters in SMD and failsafe option

– High insulation resistance

DC spark-over voltage: 90 V DCNom. discharge current: 10 kASize: 5 x 5 x 7.6 mm

– 3-electrode arresters in SMD – High insulation resistance

Overvoltage protection in telecommunication appliances, fixed line networks, wireless networks and electronic circuits

Series M5 A8 T8

Technicaldata

Features

Applications

Surge Arresters


– 2-electrode SMD and leaded version– Low capacitance– High insulation resistance


– 2-electrode SMD and leaded version– Very high discharge current– High insulation resistance


– 3-electrode arresters– High discharge current– High insulation resistance

Overvoltage protection in telecommunication appliances, xDSL- and cable modems, wireless networks, electronic circuitsand industrial applications

Overvoltage protection in telecommunication appliances, fixed line network, wireless networks,electronic circuits and industrial applications

Overvoltage protection in telecommunication appliances, fixed line network, wireless networksand electronic circuits


Piezo and Protection DevicesSurge Arresters, PTC Thermistors

EPCOSTDK

Surge Arresters PTC Thermistors

Series H38 L1 V13 and V10

Technicaldata

Features

Applications

Surge Arresters

DC spark-over voltage: > 600 V DCProtection level at 1.2/50 µs, 6 kV:< 1500 VImpulse current (10/350 µs): 100 kA Size: Ø 30 x 30 mm

– High impulse current (10/350 µs)– Temporary overvoltage withstand capability– IEC 61643-11

DC spark-over voltage: > 600 V DCProtection level at 1.2/50 µs, 6 kV:< 1500 VImpulse current (10/350 µs): 100 kA Size: Ø 30 x 12 mm

DC spark-over voltage:> 600 V DC, > 1100 V DCProtection level at 1.2/50 µs, 6 kV:< 1500 V, < 2500 VMax. discharge current: 60 kAImpulse current (10/350 µs): 12 kA Size: Ø 12 x 17 mm

– High insulation resistance– Temporary overvoltage withstand

capability– IEC 61643-11

AC line protection 230/400 V AC, class I, N-PE AC line protection 230/400 V AC, class I & II, N-PEPower suppliesPhotovoltaic systems

Series EF Overcurrent protection Overcurrent protectionLead-free series

Technicaldata

Features

Applications

DC breakdown voltage: 270 … 3200 VMax. discharge current: 10 kASize: Ø 8 x 6 mm

– High insulation resistance– Temporary overvoltage withstand

capability– IEC 61643-11– UL 1449 (E319264)

Max. voltage: 20 … 1000 VRated resistance: 0.3 … 7500 VRated current: 8 … 2100 mA

– High thermal stability– No resistance drift for 100 switching

cycles

Max. voltage: 265 VRated resistance: 10 … 120 VRated current: 50 … 220 mA

– High thermal stability– No lead contained in ceramic or

solder joint– No resistance drift for 100 switching

cycles

AC line protection 230/400 V ACDevice protectionPower suppliesPhotovoltaic systems

Overcurrent protection in automotive electronics, power supplies, entertainment and household electronics


Piezo and Protection DevicesPTC Thermistors

EPCOSTDK

Series Overcurrent protection – SMD Overcurrent protection Telecom pair protectors – SMDTelecom

Technicaldata

Features

Applications

PTC Thermistors

Max. voltage: 30 … 400 VRated current: 12 … 310 mASize (EIA): 0402 … 4032

– High thermal stability– No resistance drift for 100 switching

cycles

Max. fault voltage: 245 VRated resistance: 4.75 … 55 VMatching: 0.5 … 2 V

– Compliant with ITU standards– No resistance drift after switching

Max. fault voltage: 245 VRated resistance: 9 … 75 V

– Compliant with ITU standards– Matched pair in one housing

Overcurrent protection in automotiveelectronics, power supplies, entertain-ment and household electronics

Overcurrent protection in central office linecards, base stations and customer premises equipment

Series Telecom pair protectors Switching applications Motor startfor GR1089 central office Plastic case

Technicaldata

Features

Applications

PTC Thermistors

Max. fault voltage: 600 VRated resistance: 70 V

– Compliant with GR1089 central office

– Matched pair in one housing

Max. voltage: 160 … 265 VRated resistance: 80 … 3200 V

– Useful life up to 100 000 switchingcycles

Rated voltage: 120 … 230 V ACMax. current.: 6 … 12 A

– Useful life > 100 000 switching cycles

Overcurrent protection in central officelinecards

General purpose delayed switching inentertainment, household and industrial electronics

Delayed switch-off of the starter auxiliary winding in single-phase induction motors (e.g. in refrigeratorsand air conditioners)


Piezo and Protection DevicesPTC Thermistors

EPCOSTDK

Series Heating elements High voltage heating FormFit PTCelements

Technicaldata

Features

Applications

PTC Thermistors

Max. voltage: 30 … 230 VRated resistance: 1 … 10 000 V

– Available in round and rectangularshape

– Al or Ag electrode

Customized solutions upon requestMax. voltage: up to 1 kV

– Available in rectangular shape– Al or Ag electrode

Customized heating elements

– Any kind of 3D structure possible– High accuracy of geometrical

parameters– Efficient heating performance

Automotive air heating systemsElectrothermal actuatorsCabinet heating

Automotive air or water heating systems

Hybrid and electric vehicles

Heating of fluids, gases and solids

Series Point level sensors Motor protection Limit temperature sensors Limit temperature sensors –Single or triple sensors SMD

Technicaldata

Features

Applications

PTC Thermistors

Max. voltage: 18 … 25 VN = 5000 switching cycles

– Liquid level detection for oil and water

– Hermetically sealed glasscase or stainless steel case

Max. voltage: 30 VRated resistance: < 100 … 300 V

– Characteristics for sensingtemperatures compliantwith DIN 44081/44082

– Customer specific leadlengths on request

Max. voltage: 30 VRated resistance: < 100 … 330 VThermal threshold time:3 … 30 s

– Available as leaded disksor assembly probe

Max. voltage: 32 VRated resistance: 110 … 10 000 VTemperature tolerance:±3 … ±5 °CSensing temperature: 70 … 140 °CSize (EIA): 0402 … 0805

– Fast and reliable response– UL approval

Level sensors for indoor andoutdoor tanks

Industrial and home applications

Automotive electronicsEntertainment and house-hold electronics

Battery packsLED lighting

Industrial motors and machines protection

Power suppliesLighting equipment


Piezo and Protection DevicesVaristors

EPCOSTDK

Series Q14, Q20 ETFV/T-series CU varistors – SMD SFS14

Technical data

Features

Applications

Varistors

Q14: Imax 8/20 µs: 8 kAQ20: Imax 8/20 µs: 15 kAOperating voltage VRMS: 130 … 680 V

– Leaded varistors 14 and20 mm

– Max. load capacity vs.height

– High surge current ratingsup to 15 kA

– For high energy absorption– UL 1449 ed.3

T14: Imax 8/20 µs: 6 kAT20: Imax 8/20 µs: 10 kAETFV25: Imax 8/20 µs: 20 kAOperating voltage VRMS: T14: 130 … 420 VT20: 130 … 1000 V ETFV25: 115 … 420 V

– ThermoFuse (varistor andfuse in one housing)

– Size Ø 14, 20 and 25 mmdisks

– Space saving– Monitoring option with 3rd

lead– UL 1449 ed.3

Size (EIA): 3225, 4032, 4948Operation voltage VRMS: 14 … 300 VMax. surge current (8/20 µs):3500 A Max. energy absorption:82 J (2 ms); Max. power dissipation: 400 mW– Electrically equivalent to

leaded types S05, S07,S10

– Lead-free soldering– UL and CSA approved *)

Imax 8/20 µs: up to 5 kAOperating voltage VRMS: 175 … 385 V

– Plastic housing protectedvaristor

– No flame or rupture– Heat resistance and

flame-retardant to UL 94 V-0

– UL 1449 ed.3

Industrial applicationsPower suppliesInvertersPhotovoltaic systems

Consumer electronicsPower supplies

Industrial applicationsPower suppliesInvertersPower meters

Surge current protection inSMD package for automo-tive, industrial and telecomapplications

Series Ring Varistors S5, S7, S10, S14, S20 S25VAR-18

Technicaldata

Features

Applications

Varistors

VAR-18-P (Plane surface electrode type)VAR-18-S (Side surface electrode type)Voltage: 2.0 … 38.0 E10 mA (V)

– Positive temperature characteristicsof the varistor voltage (E10 value):prevents the varistor voltage fromdecreasing at high temperaturesand large currents flowing throughthe varistor

S05: Imax 8/20 µs: up to 800 AS07: Imax 8/20 µs: up to 1750 AS10: Imax 8/20 µs: up to 3.5 kAS14: Imax 8/20 µs: up to 6 kAS20: Imax 8/20 µs: up to 12 kAOperating voltage VRMS: 11 … 1100 V

– Leaded varistors 5 to 20 mm– High surge current ratings – High energy ratings (2 ms) up to

595 J– For high energy absorption– UL 1449 ed.3


– Leaded varistors 25 mm– High surge current ratings up to

20 kA – High energy ratings (2 ms) up to

1025 J– For high energy absorption– UL 1449 ed.3

Micro-motors (this lineup includesside-surface electrode varistors thatcan be used with ultra-compact micromotors)

Industrial applicationsPower suppliesPhotovoltaic systemsHousehold electronicsTelecommunications

Industrial applicationsPower suppliesInvertersPhotovoltaic systems

*) UL and CSA pending for CU4948


Piezo and Protection DevicesVaristors

EPCOSTDK

Series LS40, LS41, LS42 LS40-E7 LS50

Technicaldata

Features

Applications

Varistors

LS40: Imax 8/20 µs: 40 kALS41: Imax 8/20 µs: 50 kALS42: Imax 8/20 µs: 65 kA Operating voltage VRMS: 130 … 750 V

– Strap terminals– High surge current ratings – High energy ratings (2 ms) up to

1200 J– UL 1449 ed.3

Iimp 10/350 µs: 6.5 kAImax 8/20 µs: 40 kAOperating voltage VRMS: 130 … 460 V

– Strap terminals– High surge current ratings at

10/350 µs– Designed to requirements of

IEC 61643-1– UL 1449 ed.3


– Strap terminals– High surge current ratings – High energy ratings (2 ms) up to

1820 J– UL 1449 ed.3

Power suppliesPhotovoltaic systemsWind powerSurge protection devices

Series B32, B40, B60, B80 S-AUTO Energy varistorsE32, E41

Technicaldata

Features

Applications

Varistors

B32: Imax 8/20 µs: 25 kAB40: Imax 8/20 µs: 40 kAB60: Imax 8/20 µs: 70 kAB80: Imax 8/20 µs: 100 kAOperating voltage VRMS: 75 … 1100 V

– Disk shaped varistor element potted in plastic housing

– Screw terminals– Housing and potting flame retardant

to UL94 V-0– UL 1449 ed.3

S07: Imax 8/20 µs: up to 250 AS10: Imax 8/20 µs: up to 500 AS14: Imax 8/20 µs: up to 1 kAS20: Imax 8/20 µs: up to 2 kAOperating voltage: 16 … 48 V DCOperating temperature: +125 °C

– Leaded varistors 7 to 20 mm– High energy absorption– Coating flame retardant to UL 94 V-0

E32: In 8/20 µs: 5 kAE41: In 8/20 µs: 10 kACont. operating voltage: 2.45 … 4.9 kV

– Size Ø 34 and Ø 42 mm– Glass collar passivation

Power suppliesPhotovoltaic systemsWind powerInverters

Automotive electronicsJump-startLoad dumps

Gapless arrestersDistribution class


Piezo and Protection DevicesInrush Current Limiters, Multilayer Varistors, Ceramic Transient Voltage Suppressors (CTVS)

EPCOSTDK

Series S153, S235, S236, S237, S238, Plastic case Leaded disksP11, P13, S364, S464

Technicaldata

Features

Applications

Inrush Current Limiters

Operating voltage VRMS: 265 VRated resistance at +25 °C: 1 … 120 VImax: up to 20 ALoad capacitance: up to 2500 pF

– NTC thermistors– Limiting of inrush current– Wide resistance range– Lead spacing 5 and 7.5 mm– UL approval

Max. voltage: 260 … 560 V ACRated resistance: 22 … 100 V

– PTC thermistor– Operating cycles at Vmax

(charging of capacitor): 100 000

Max. voltage: 260 … 560 VRated resistance: 25 … 500 V

– PTC thermistor– Operating cycles at Vmax

(charging of capacitor): 50 000

Power suppliesSoft-start motors

Power suppliesHousehold electronicsPumpsDrives

Series MLV and CeraDiodes – SMD Multilayer chip varistors Multilayer chip varistorsAVRL AVR-M

Technicaldata

Features

Applications

Multilayer Varistors, CTVS

Size (EIA): 0201 … 2220Max. operating voltage: 5.5 … 80 V DCTypical capacitance: 0.6 … 24 000 pFMax. surge current (8/20 µs): 1200 AMax. energy absorption (2 ms): 12 000 mJ

– Bidirectional protection– No derating up to +125 °C– Lead-free soldering– Specific telecom series to IEC 61000-4-5– Specific wireless clamping voltage series– ESD capability to IEC 61000-4-2

level 4

Size: 0402 … 1608Varistor voltage: 27 … 90 typ. V1 mA (DC 1 mA)Maximum continuous voltage: 10 … 25 max. V DC

– No polarity, due to symmetrical current-voltage characteristics

– Excellent electrostatic absorption capability

– Adopted inner electrode lamination structure

Size: 0402 … 2012/14A2Varistor voltage: 6.8 … 39 V, 1 mA (DC 1 mA)Max. continuous voltage: 3.5 … 28 max. V DCMaximum energy: 0.003 … 0.3 J max.(10/1000 s)Max. peak current: 1 … 100 A max.(8/20 s)

– No polarity, due to symmetrical current-voltage characteristics

– Excellent electrostatic absorption capability

– Adopted inner electrode lamination structure

ESD protection for consumer electronics, industrial, telecom and wireless applications

Electrostatic absorptionPulse noise absorption


Piezo and Protection DevicesMultilayer Varistors, Ceramic Transient Voltage Suppressors (CTVS), NTC Thermistors

EPCOSTDK

Series SHCV Standard – SMD

Technicaldata

Features

Applications

Multilayer Varistors, CTVS NTC Thermistors

Size (EIA): 1206/1812/2220Max. operating voltage: 16 … 45 V DCMax. surge current (8/20 ms): 100 … 1200 AMax. load dump energy (10 pulses): 1.5 … 12 JMax. jump start voltage (5 min): 24.5 … 26 VNominal capacitance (1 kHz, 0.5 V): 220 … 4700 nFInsulation resistance: ≥ 10 MVOperating temperature: up to +125 °C

– Lead-free soldering– Qualified based on AEC-Q200, rev. C

Size (EIA): 0402 … 0805 / 1206 on requestB values: 3455 K … 4575 K R values: 1 … 680 kVR tolerance: up to +/-1%

– Ni barrier termination– Lead-free soldering

Combined protection against transient and RFI suppression in a single component for DC motors

Temperature measurement and compensation in consumer electronics, information technology, industrialand wireless applications

Series MLV and CeraDiodes – SMD MLV automotive – SMD(2, 4 and 5 fold) E series

Technicaldata

Features

Applications

Multilayer Varistors, CTVS

Size (EIA): 0405 … 0612Max. operating voltage: 5.6 … 22 V DCTypical capacitance: 3 … 56 pFMax. surge current (8/20 µs): 1200 AMax. energy absorption: 12 000 mJ (2 ms)

– Bidirectional protection– No derating up to +125 °C– Lead-free soldering– Specific ESD/EMI filter series– ESD capability to IEC 61000-4-2 level 4

Size (EIA): 0402 … 2220Max. operating voltage: 16 … 56 V DCTypical capacitance: 10 … 15 000 pFLoad dump and jump start specifiedOperating temperature: up to +150 °C

– Bidirectional protection– No derating up to +150 °C– 100% lead-free– Qualified based on AEC-Q200, rev. C– ESD capability to IEC 61000-4-2 level 4

ESD protection for automotive, consumer, industrial, and wireless applications

Combined ESD protection and EMI filtering for audio lines in consumer and wireless applications

ESD and high-transient overvoltage protection in automotive applications


Piezo and Protection DevicesNTC Thermistors, Nebulizer Units

EPCOSTDK

Series NTCG – SMD Automotive – SMD

Technicaldata

Features

Applications

NTC Thermistors

Size (EIA): 0603 … 2012B constant: 3250 … 4750 K (+25/+85 °C)Nominal resistance value: 30 V … 1.0 MV (+25 °C)Operating temperature: –40 … +125°C

– Good solderability– Layered internal electrode structure– Wide range of resistances and B constants– Good stability of resistance value after soldering

Temperature measurement and compensation Temperature measurement and compensation in automotive electronics

Size (EIA): 0402/0603/0805B values: 3455 K, 4000 K, 4480 KR values: 4.7 … 100 kVR tolerance: up to ±1%

– Qualification based on AEC-Q200, Rev. C– Temperature measurement up to +150 °C– Ni barrier termination– Lead-free soldering

Series Ultrasonic nebulizer unitsNB

Technicaldata

Features

Applications

Nebulizer Units

Rated voltage: 48 V AC/12 V DC Power consumption: 13.2 max./30 WMist output ratio: (150 + 100, –50) x 10–3 … 450 x 10–3 min. l/h

NB-59S-09S– Compact size– Compliance with radio law noise regulations– Reduction of harmonic component noise– Parallel connection to one transformer is supported– Provides DC 48 V output

NB-80E-01– Compact, with highly reliable circuitry– Separate transducer and drive circuit sections

provide superior layout versatility

Household appliancesMedical appliances


SensorsNTC Sensors

EPCOSTDK

Series NTC thermistors with lead spacing Mini sensors with bendable wires Glass-encapsulated sensors

Technicaldata

Features

Applications

NTC Sensors

Operating temperature: –55/+155 °CResistance value: 1 … 470 kVAccuracy (%): DRR/RR = 1, DRB/RB = 1Head size: 2.5 … 4.5 mmDiameter of lead wires: 0.4 … 0.6 mmLead spacing: 2.5 or 5.0 mmDelivery mode: tape & reel; bulkCoating: epoxy

– Available with insulated leads– High measuring accuracy– Lead-spacing – Rugged design– Cost effective

Operating temperature: –55/+155 °CResistance value: 2 … 100 kVAccuracy (%): DRR/RR = 1, DRB/RB = 1Head size: 2.41 … 2.8 mmDiameter of lead wires: 0.25 mmDelivery mode: bulkCoating: epoxy

– Available with insulated leads– Special version with improved

resistance to humidity available– High measuring accuracy– Tight B value tolerance available– Available with long bendable leads– UL approval (S861, S867)

Operating temperature: –55/+300 °CResistance value: 2 … 100 kVAccuracy (%): DRR/RR = 1, DRB/RB = 1Head size: 0.9 … 3.0 mmDiameter of lead wires: 0.15 … 0.3 mmDelivery mode: bulkCoating: glassInsulation voltage: 500 V/1 s

– Available with insulation of head andleads

– High measuring accuracy– Very short response time

Temperature measurement and compensation

Temperature measurement

Series Glass-encapsulated sensors Cable-bound temperature sensors Water temperature sensorsfor media contact

Technicaldata

Features

Applications

NTC Sensors

Operating temperature: –55/+260 °CResistance value: 10 … 30 kVAccuracy (%): DRR/RR = 1, DRB/RB = 1Head size: 3.0 mmDiameter of lead wires: 0.3 mmDelivery mode: bulkCoating: glassInsulation voltage: 500 V/1 s

– With insulation of head and leads forspecified media resistance

– Tests with several medias specified(e.g. oil, fuel)

– High measuring accuracy

Operating temperature: –40/+80 °CResistance value: 5 … 12 kVAccuracy (%): DRR/RR = 2, DRB/RB = 1.5Head size: 5.4, 7, 8, 9 mmCable length: up to 2800 mm

– Highly resistant to water/moisture– Construction based on

DIN EN 60 730-1/VDE protectionclass 2 (M2020)

– UL approved (M2020: file E69802)

Operating temperature: –10/+200 °CResistance value: 4.8 … 48 kVAccuracy (%): DRR/RR = 2, DRB/RB = 1

– Suitable for use in corrosive environments

– Highly resistant to water/moisture– UL approved (K276)– VDE approval

(K276: DIN EN 60 539-1:2002)

Temperature measurement


SensorsNTC Sensors

EPCOSTDK

Series Screw-on temperature sensors Pipe mounted temperature sensors Evaporator sensors

Technicaldata

Features

Applications

NTC Sensors

Operating temperature: –55/+300 °CResistance: 5 … 100 kVAccuracy (%): DRR/RR = 2, DRB/RB = 1

– Good thermal coupling through metal tag

– Thermistor encapsulated in metal tag case

– M703: UL approval (E69802)

Operating temperature: +5/+100 °CResistance: 10 kVAccuracy (%): DRR/RR = 3, DRB/RB = 1For pipe diameter: 13.5 … 22 mmInsulation voltage: 500 V AC

– Fast and easy mounting– Short response time– Good thermal coupling to pipes

Operating temperature: –40/+90 °CResistance: 2 … 10 kVAccuracy (%): DRR/RR = 1, DRB/RB = 1

Special version with glass -encapsulated NTC:– Very short response time

< 3 s in water and < 4 s in air 5 m/s– Highly humidity-resistant

Surface temperature measurement Temperature measurement of fluids in pipes

Temperature measurement at evaporator

Series Air duct sensors Ambient temperature sensors Solar sensors

Technicaldata

Features

Applications

NTC Sensors

Operating temperature: –40/+90 °CResistance value: 2 … 30 kVAccuracy (%): DRR/RR = 1, DRB/RB = 1

Plastic version with clip mounting– Fast response time– Reduction of weight– Simplified recycling– Clips for mounting (no sealing)

Operating temperature: –40/+85 °CResistance value: 2 … 30 kVAccuracy (%): DRR/RR = 1, DRB/RB = 1

– Humidity resistant over-molded design

– High resistance to water splashesIPx9k

– Cable-based design– Designed for 2000 h water

immersion at +80 °C

Operating temperature: –40/+100 °CTolerance: ±15%

– Mono and dual-zone sensors– High resolution and sensitivity– Measurement of solar radiation on

the passenger compartment for theHVAC system

– Angular characteristics– Analog signal

Measurement of average air temperature

Outside temperature measurement Measurement of solar radiation and direction


SensorsNTC Sensors

EPCOSTDK

Series NTC sensors – Plastic case type, NTC sensors NTC sensorsoil temperature sensor NTCDS series NTCGF seriesNTCDP series

Technicaldata

Features

Applications

NTC Sensors

Nominal resistance: R20 = 2.5 kV ±3% (20 °C)B constant: B20/80 = 3520 K ±2%Operating temperature: –40 … +165 °CThermal time constant: 60 s max. (in still oil)Heat dissipation constant: 5 mW/°C (in still air)

High heat resistanceExcellent oil resistance

Size: 3.0 × Ø 1.8 mm … 4.0 × Ø 2.0 mmOperating temperature: –40 … +250 °C (Lead wire Ni plating),–40 … +125 °C (Lead wire Sn plating)Heat dissipation constant: 1 … 2 mW/°C (in still air)Thermal time constant: 10 … 20 s max. (in still air)Insulation resistance (between lead and glass): 50 MV min. (DC, 500 V)

Features a glass-sealed construction identical to DHDs (Double Heatsink Diodes)Highly reliable and resistant to high relative humidityTight tolerances are maintained in resistance vs. temperature characteristics

Size: 6.0 × Ø 3.5 mmResin DIP typeOperating temperature: –30 … +100 °CHeat dissipation constant: 4 mW/°C (in still air)Thermal time constant: 30 s max. (in still air)Insulation resistance (between lead and thermistor): 5 MV min. (DC, 500 V)

Automotive electronicsTemperature measurement of oil

Automotive electronics, home appliances, consumer electronics

Series NTC sensors NTC sensors NTC sensors – ABS Plastic caseNTCGP series NTCDP series NTCDP series

Technicaldata

Features

Applications

NTC Sensors

Nominal resistance value: R25 = 15 kV ±3% … 50 kV ±3%B constant: B25/50 = 3950 K ±3%Operating temperature: –20 … +80 °CThermal time constant: 6 s max. (in still water)Heat dissipation constant: 2.8 mW/°C(in still air)– Resin DIP type with built-in multilayer

element – Good heat responsiveness due to its

small size

Nominal resistance: R25 = 10 kV ±3%B constant: B25/85 = 4000 K ±2%Operating temperature: –40 … +150 °CThermal time constant: 15 s max. (in still water)Heat dissipation constant: 3.3 mW/°C(in still air)

– Excellent reliability, high responsive-ness, high heat resistance

– 3 types are availableEpoxy (Ø 5.5 mm): Priority given to heat responsivenessEpoxy (Ø 6.0 mm): Compatible with copper case type of Ø 6.0 mmEpoxy screw fix: superior surface temperature detection

Nominal resistance: R3 = 5.6 kV ±0.2 kV (3 °C)B constant: B3/50 = 3850 K ±100 KOperating temperature: –40 … +85 °CThermal time constant: 30 s max. (in still water)Heat dissipation constant: 2.5 mW/°C (in still air)– Plastic case compliant to

Food Hygiene Act– Highly waterproof– Inexpensive

Temperature measurement Temperature measurement Surface temperature detection

Home appliancesConsumer electronics


SensorsNTC Sensors, Pressure Sensors

EPCOSTDK

Series E-Motor temperature sensor Battery temperature sensor

Technicaldata

Features

Applications

NTC Sensors

Operating temperature: –40 … +200 °CResistance value: 10 kV/25 °C

– Measurement directly in the winding of the motor– Mechanically protected by plastic housing– High insulation voltage up to 2000 V– Available with different connectors, RT-curves and

cable lengths

– Screw-on sensor for battery– Mechanically protected by plastic housing– Easy mounting and good thermal coupling– Available with different connectors, RT-curves and

cable lengths

Temperature measurement in stator of electric motor Temperature measurement of batteries in electric cars

Operating temperature: –40 … +100 °CResistance value: 10 kV/25 °C

Series Sensor dies MiniCellC32

Technicaldata

Features

Applications

Pressure Sensors

Pressure: 400 mbar … 40 barOperating temp.: –40 … +135 °CNon-linearity: typ. 0.2% FSOutput span: typ. 120 mVSize: 1.65 x 1.65 mm

– Very small and variable pressure sensor die– Available for absolute, gauge and rear side

absolute measurements

– Differential pressure – Pressure transmitter with high media resistance for

both pressure ports with stainless steel diaphragms

Automotive, medical, industrial and consumer applications Industrial, medical and automotive applications

Pressure: 0.5 … 16 barOperating temp.: –40 … +140 °CNon-linearity: typ. 0.5% FSRatiometric output signal


SensorsPressure Sensors, Humidity Sensors

EPCOSTDK

Series ASB/ASA/ASR – SMD TransmittersAK

Technicaldata

Features

Applications

Pressure Sensors

Pressure: 1.2 … 2.5 bar Operating temp.: –40 … +125 °C Non-linearity: typ. 0.1% FS Supply voltage: 2.7… 5.5 VSize: 4.3 x 4.3 x 2.4 mmfor absolute and 4.3 x 7.9 x 3.0 mm for gauge measurement

– Analog V1 or VR voltage output– Minimized pressure transmitter

– Tube or thread connection– Packaged pressure sensor die for low pressure ranges– For gauge measurement

Industrial, medical and automotive applications Industrial, medical and automotive applications

Pressure: 25 mbar … 25 barOperating temp.: –30 … +85 °CNon-linearity: typ. 0.5% FS

Series Humidity sensors units Humidity sensorsCHS series CHS-ESS series

Technicaldata

Features

Applications

Humidity Sensors

Standard operating voltage: 5 VOperating current: 0.6 mAResponse time: 1 minRecommended operating temperature: CHS-U type +5 … +45 °CCHS-SS, CHS-C types +15 … +35 °C

– Unit type– Humidity sensing characteristics exhibit virtually

no hysteresis– Low current consumption– Output DC: 1 V at 100% RH; relative humidity can

be read directly with a voltmeter– All-in-one construction integrates sensor with

support circuitry– The module operates off a 5 V power supply

Industrial and measuring equipmentConsumer and office equipment

Air conditioners, humidifiers, dehumidifiers, dryers, refrigerators, PPC, LBP

Rated voltage: 5 V max.Rated power: 0.5 mWResponse time: 1 minOperating temperature: 0 … +60 °C

– Element type– Small and responsive– Minimal variation for excellent detection accuracy– Highly resistant to water and gases


SensorsApplied Sensors

EPCOSTDK

Series Powder level sensors Gear-tooth sensorsLTS series PS-HR series

Technicaldata

Features

Applications

Applied Sensors

Operating voltage: 5 V ±0.5Input current: 20 mA max.Sensor level: 5 mm ±3 mmOutput voltage: High 4.5 V min.

Low 0.5 V max.

– 3-terminal type separate excitation oscillation formula– Piezoelectric ceramic sensor element– Diecast finish– Highly resistant to external vibrations– Stable detection characteristics– Can detect both magnetic and non-magnetic powders

Toner detectors for copiers, laser printers Detectors for coffee and other powders in automatic beverage vending machines, detectors for powders

Operating temperature: –40 … +150 °COperating voltage: 4.75 … 16 VOutput voltage: VHIGH-VCC –0.5 V/VLOW 0.4 VResponse frequency: 0 … 12 kHz

– Low cost sensor – Measures the rotation speed of gear and rotation angle

of cam crank– Highly precise digital output due to integration of

components into an IC package– Designed to tolerate extreme temperatures

(–30 … +150 °C)– Probe distance can be varied over a wide range– Built-in surge voltage suppression circuit

Automotive: angle, speed sensing

Series Toner density/quantity sensors Powder level sensorsTS-A, TS-K, TS-L series TSP

Technicaldata

Features

Applications

Applied Sensors

Rated voltage: 24 VPower supply current: 20 mA max.Rated control voltage: 7 VControl current: 10 mA max.Analog output voltage: 2 … 3.3 VDigital output voltage: 0.5 … 4.5 V

– One-sided substrate type: TS-A, TS-K series– Double-sided substrate type: TS-L series– Sensor adjustment point can be installed at any location – Operating point can be reset easily – Microprocessor in the printer or copier can vary the

control lead voltage for automatic adjustment

Toner density, quantity in printers

Operating voltage: 5 VInput current: 20 mA max.Sensor level: 5 mm ±3 mmOutput voltage: High 4.5 V min.

Low 0.5 V max.

– 2-terminal type separate excitation oscillation formula– Piezoelectric ceramic sensor element– Die cast finish – Highly resistant to external vibrations– Stable detection characteristics– Can detect both magnetic and non-magnetic powders

Toner detectors for copiers, laser printersDetectors for coffee and other powders in automatic beverage vending machines, detectors for powders


EPCOSTDK

SensorsApplied Sensors

Series Surface potential sensors Surface potential sensorsEFS-22D series EFS-31D series

Technicaldata

Features

Applications

Applied Sensors

Measured voltage range Ve: –1000 … 0 VPower supply voltage: 24 V ±10%Output voltage (measured voltage) V0: 2.5 (–500), 4.5 (–900) VOutput variation ΔV0: ±0.05Response time: 20 ms max.Operating temperature: 0 … +50 °C

– Stable output performance is maintained for long periods

– Quick responsiveness of high speed 11 ms (typical) realized

– The range of detector output (0 to 4.5 V) fluctuations islimited to less than ±0.05 V

Surface electrical potential measurements in variousequipment, including drum or paper in a copier, laser printer

Surface electrical potential measurements in variousequipment, including drum or paper in a copier, laser printer

Measured voltage range Ve: 0 … +1000 VPower supply voltage: 24 V ±10%Output voltage (measured voltage) V0: 0 (0), 2.5 (+500), 4.5 (+900) VOutput variation ΔV0: ±0.05Response time: 20 ms max.Operating temperature: 0 … +50 °C

– Stable output performance is maintained for long periods

– Quick responsiveness of high speed 11 ms (typical) realized

– The range of detector output (0 to 4.5 V) fluctuations islimited to less than ±0.05 V


Ceramic CapacitorsMultilayer Ceramic Capacitors

EPCOSTDK

Series General use – SMD Mid voltage – SMD High voltage – SMDC, CGA series C, CGA series C series

Technicaldata

Features

Applications

Multilayer Ceramic Capacitors

Size: 0402 … 5750Temp. characteristic: CH, C0G, JB, SL,X7S, X7R, X5R, X6SRated voltage: 4 … 50 VCapacitance: 0.5 pF … 100 µF– Wide range of case size and superior

dimension precision– Available in EIA class 1 and

2 dielectrics up to 50 V

Size: 1005 … 5750Temp. characteristic: C0G, X7R, X7S,X6S, X7TRated voltage: 100 … 630 VCapacitance: 100 pF … 15 µF– Unique design allows for higher

voltage in smaller case size– Available in 100, 250, 450 and 630 V

Size: 3216 … 5750Temp. characteristic: C0G, X7S, X7RRated voltage: 1 … 3 kV Capacitance: 10 pF … 47 nF

– Advance design provides improvedwithstanding voltage

– Available rating up to 3000 V

Automotive electronicsCommunicationsConsumer electronicsIndustrial applicationsGreen Energy


Industrial applicationsGreen Energy

Series High temperature – SMD Serial design – SMDC, CGA series CEU series

Technicaldata

Features

Applications


Size: 1005 … 3225Temp. characteristic: X8R, NP0 Rated voltage: 25 … 100 VCapacitance: 100 pF … 10 µF

– Stable temperature characteristics up to 150 ºC– Highly precise temperature performance (±7.5%)

up to +125 ºC

Automotive electronicsIndustrial applicationsGreen Energy


Size: 1608, 2012Temp. characteristic: X7RRated voltage: 50, 100 VCapacitance: 1 … 100 nF

– 2 series-connected capacitors in one component– Improved bending resistance and temperature cycle

performance– Ultra high reliability design for automotive battery line

applications



EPCOSTDK

Series Soft termination – SMD Megacap type – SMDC series, CGA series CKG series

Technicaldata

Features

Applications


Size: 1608 … 7563Temp. characteristic: X7R, X7S, X7TRated voltage: 16 … 630 VCapacitance: 10 nF … 100 µF

– Improved bending resistance and temperature cycle performance

– Termination technology available for most case sizes including arrays


Size: 3225 … 7563Temp. characteristic: X5R, X7R, X7S, X7TRated voltage: 16 … 630 V Capacitance: 47 nF … 100 µF

– Advance design for twice the capacitance on single footprint

– Improved vibration and thermal/mechanical stress performance

– Lower ESR and ESL than ALU and TA capacitors


Series Flip type – SMD 2-in-1 array; 4-in-1 array – SMDC series CKC series

Technicaldata

Features

Applications


Size: 0510 … 1632Temp. characteristic: X6S, X7R, X5R, X7SRated voltage: 4 … 50 VCapacitance: 10 nF … 10 µF

– Flipped geometry permits lower inductance than standard capacitor

– Special design allows for adequate high frequency current to IC

CommunicationsConsumer electronics

CommunicationsConsumer electronics

Size: 1410 … 3216Temp. characteristic: C0G, X7R, X5RRated voltage: 6.3 … 100 V Capacitance: 10 pF … 2.2 µF

– Allows for reduction of PCB space and mounting time– Unique electrode design reduces crosstalk– Also available in soft termination for higher reliability

performance



EPCOSTDK

Series Conductive epoxy – SMD Ultra low inductance – SMDCGA series CLL series

Technicaldata

Features

Applications


Size: 1005 … 3225Temp. characteristic: C0G, X7R, X8RRated voltage: 6.3 … 100 V Capacitance: 1 pF … 10 µF

– AgPdCu termination for conductive glue mounting– Improved mechanical/thermal strength when used with

conductive glue

Automotive electronics CommunicationsConsumer electronics

Size: 1608 … 2012Temp. characteristic: X7R, X7S, X6SRated voltage: 4 … 10 VCapacitance: 47 nF … 6.8 µF

– Unique internal structure allows cancelation of magneticfields to reduce equivalent series inductance

– Eight-sided terminal electrode design in one capacitor

Series Open mode – SMD 2-in-1 array & soft termination – SMDCGA series CKG series

Technicaldata

Features

Applications


Size: 2012 … 5750Temp. characteristic: X8R, X7RRated voltage: 16 … 630 V Capacitance: 1000 pF … 22 µF

– Unique design allows increased resistance to mechanical bending

– Improved performance in vibration and electrical stresses

Automotive electronics Automotive electronicsCommunicationsConsumer electronics

Size: 1410, 2012Temp. characteristic: C0G, X7R, X5R, X8RRated voltage: 6.3 … 100 V Capacitance: 10 pF … 2.2 µF

– Improved ruggedness against mechanical stress (e.g. bending, dropping)

– Allows reduction of PCB space and mounting time


Ceramic CapacitorsLeaded Ceramic Capacitors, Ultra-High Voltage Capacitors

EPCOSTDK

Series Dipped radial Mid-high voltageFK series CK45 series

Technicaldata

Features

Applications

Leaded Ceramic Capacitors

Temp. characteristic: C0G, X7R, X5R, C0G, X7R (mid voltage)

Rated voltage: 6.3 … 50 V (general use) 100 … 630 V (mid voltage)

Capacitance: 1 pF … 100 µF

– Dipped radial leaded ceramic capacitors are multilayer ceramic capacitors attached with solder coated wireleads and dipped with UL94V-0 approved resin

– Provides large electrostatic capacitance– Leads are formed with a “kink” to achieve consistent

insertion heights and to facilitate the release of gasesduring soldering for dramatically improved solderability

– Taping specifications for automatic insertions can bemet

General use

Temp. characteristic: B, ERated voltage: 1 … 3 kVCapacitance: 100 pF … 10 nF

– High reliability– Low dissipation factor, and decreased self-heating

temperature in high frequency and high voltage applications

– Halogen-free external resin coating

Series Mid-high voltage Ultra-high voltageCD/ CS series UHV series

Technicaldata

Features

Applications

Leaded Ceramic Capacitors Ultra-High Voltage Capacitors

CD seriesTemp. characteristic: B, SL, Z5U Rated voltage: Eac X1/440 V, Y1/400 V Capacitance: 10 pF … 4.7 nF

CS seriesTemp. characteristic: B, SL, Z5U, F Rated voltage: Eac X1/440 V, Y2/300 V Capacitance: 10 pF … 10 nF

– Compliant with safety standards – Flame-resistant, reinforced outer insulation prevents fires,

electrical shock, and other potential hazards– Halogen-free external resin coating

AC lines High voltage power suppliesLaser equipment

Temp. characteristic: Z5TRated voltage: 20 … 50 kVCapacitance: 100 … 4000 pF

– Low dissipation and excellent voltage/capacitance characteristics

– Epoxy-encapsulated to meet requirements of high voltage applications


Film CapacitorsMedium Power Film Capacitors

EPCOSTDK

Series MKT boxed MKT uncoatedB32520 … B32529 (SilverCap)

B3256 …, B3257…Technicaldata

Features

Applications

Medium Power Film Capacitors

Rated capacitance:1.0 nF … 220 µFRated voltage: 50 … 630 V DC32 … 220 V AC

– Plastic case and epoxy resin sealing (UL94V-0)– Mechanical and environmental strength

Blocking, coupling, decoupling, bypassing, electronic, ignition in industrial, lighting, automotive,information technology, entertainment electronics and household appliances

Rated capacitance: 1.0 nF … 33 µFRated voltage: 63 … 1000 V DC40 … 500 V AC

– Shape flexibility– Special dimensions on request– B3257… for ignition

Dielectric polyester (PET) offers: – Higher density of capacitance/mm3 and +125 ºC operating temperature vs polypropylene (PP) dielectric– Lower dissipation factor, higher current capability (RMS and peak), longer useful life and parameter stability vs

aluminum electrolytic dielectric

Series MKP axial MKP boxedB32669 B32651 …, B32656 …

Technicaldata

Features

Applications


Rated capacitance: 1 … 10 µFRated voltage: 250, 400 V AC

– Low profile– Good self-healing properties

AC filtering in industrial, lighting, automotive, information technology, entertainment electronics and household appliances

General purpose, snubbering, resonance, ignition, AC and DC filtering in industrial, lighting, automotive, entertainment electronics and household appliances

Rated capacitance:0.47 nF … 8.2 µFRated voltage:250 … 2000 V DC160 … 1000 V AC

– Mechanical stability– High RMS and peak current capability

Dielectric: Polypropylene (PP) offers: – Higher dielectric strength vs. polyester (PET) dielectric– Lower dissipation factor, higher current capability (RMS and peak) and para meter stability vs. polyester dielectric– Epoxy resin sealing and plastic box case are UL94V-0 flame retardant materials



EPCOSTDK

Series MKP boxed (PFC) MKP boxed (high V AC-temp.)B32671P…, B32673P… B32671L…, B32672L…B32671Z…, B32673Z…

Technicaldata

Features

Applications


Rated capacitance:10 nF … 2.2 µFRated voltage:450 … 630 V DC160 … 310 V AC

– Very compact design– For (passive) power factor correction in power supplies– LED ballasts

Power factor correction, decoupling, coupling, switching inindustrial, lighting, automotive, entertainment electronicsand household appliances

Snubbering, resonance in industrial, lighting, automotive, entertainment electronics and household appliances

Rated capacitance:0.68 nF … 1 µFRated voltage:250 … 2000 V DC160 … 900 V AC

– Very small dimensions– For high frequency AC loads and pulses– High pulse withstand capability

Dielectric: Polypropylene (PP) offers: – Higher dielectric strength vs. polyester (PET) dielectric– Lower dissipation factor, higher current capability (RMS and peak) and parameter stability vs. polyester dielectric– Epoxy resin sealing and plastic box case are UL94V-0 flame retardant materials

Series MKP DC link High Density MKP DC link High Power MKP snubberB32774 … B32778 B32674 … B32678 B32656S… B32658S

Technicaldata

Features

Applications



Dielectric: Polypropylene (PP) offers: – Higher dielectric strength vs. polyester (PET) dielectric– Lower dissipation factor, higher current capability (RMS and peak) and parameter stability vs. polyester dielectric– Epoxy resin sealing and plastic box case are UL94V-0 flame retardant materials

Rated capacitance:1.5 … 110 µFRated voltage:450 … 1300 V DC

Rated capacitance:470 nF … 60 µFRated voltage:300 … 875 V DC

DC link, DC filtering, decoupling in industrial, lighting, automotive, entertainment electronics and household appliances

Snubbering IGBT module inindustrial, lighting, automotive, entertainment electronics and household appliances

– High density of capacitance per volume

– Low losses with high current capability

– High power: density of IRMScurrent per capacitance

– High frequency ripple current

– Very low ESL, ESR– Thermal, mechanical stability– 17 terminal options



EPCOSTDK

Series MFP dipped MFP boxed MFP snubberB32632 … B32634 B32682 … B32686 B32686S…

Technicaldata

Features

Applications



– Polypropylene (PP) film dielectric metalized on one side and metal foil electrodes

– Provides maximum pulse handling capability together with the maximum ripple current and frequency

– Very low ESL, ESR– Thermal, mechanical stability

Rated capacitance:0.47 nF … 0.33 µFRated voltage:630 … 3000 V DC, 300 … 750 V AC

– Polypropylene (PP) film dielectric metallized on one side and metal foil electrodes

– It allows maximum pulse handling capability together with maximum ripple current and frequency

Rated capacitance:0.47 nF … 1.5 µFRated voltage:400 … 2000 V DC, 250 … 500 V AC

– Crimped and straight wire terminals– Highest possible contact reliability– Very high pulse strength

– Plastic case (UL94V-0)– Mechanical stability– Very high pulse strength– High voltage– Very high currents

Snubbering IGBT module inindustrial, lighting and medical electronics with very high pulse, frequency and current demand

Smothing, snubbering, high frequency AC loads in industrial, lighting and medical electronics with very high pulse, frequency and current demand

Series X2 EMI suppression X1 EMI suppression Y2 EMI suppression Y1 EMI suppressionB32921 … B32928 B32911 … B32918 B32021 … B32026 B81123

Technical data

Features

Applications


Rated capacitance: 10 nF … 30 µFRated voltage: 305 V AC

– Standard EMI suppression capacitor for EMC filtering– Good self-healing properties– High voltage capability– Very small dimensions

X1 330 V:Rated capacitance: 10 nF … 6.8 µFRated voltage: 330 V AC

X1 530 V: Rated capacitance: 1 nF … 5.6 µFRated voltage: 530 V AC

Rated capacitance: 1 nF … 1 µFRated voltage: 300 V AC

– Standard EMI suppression capacitor for EMC filtering– Good self-healing properties– High voltage capability– Very small dimensions

Rated capacitance: 1 … 10 nFRated voltage: 250 V AC

Across-the-line applications in industrial, lighting, medical, entertainment electronics and household appliances

Line-to-ground applications in industrial, lighting, medical,entertainment electronics and household appliances


Film Capacitors Medium Power Film Capacitors, DC Link, DC Filtering Film Capacitors, AC Output/Input Filters

EPCOSTDK *) others on request

Series MKT AC Heavy Duty MKP AC HumidityB32932 … B32936 B32922H/J … B32926H/J

Technicaldata

Features

Applications


Rated capacitance: 47 nF … 2.2 µFRated voltage: 305 V AC

+85 ºC/85% RH/1000 h/240 V ACX2 safety class per UL/IEC(C ≤ 2.2 µF)High stability on capacitance valueInternal series connection

Capacitive power suppliesAC voltage dividersSerial connection with mainsFor severe ambient conditions

Rated capacitance: 0.1 … 15 µFRated voltage: 305 V AC

+85 ºC/85% RH/1000 h/240 V ACX2 safety class per UL/IEC High stability of capacitance value

Across-the-line applications in industrial, lighting, medical,entertainment electronics and household appliances For several ambient conditions

Series MKP AC Safety Box typeB32922S/T … B32926S/T B32354S …

Technicaldata

Features

Applications

DC Link, DC Filtering Film Capacitors AC Output/Input Filters

Rated capacitance: 0.1 … 10 µFRated voltage: 275 V AC

X2 safety class per UL/IECSafety functionSegmented film, safe failure mode+85 ºC/85% RH/500 h/240 V AC+60 ºC/95% RH/1000 h/240 V AC

Across-the-line applications in industrial, lighting, medical,entertainment electronics and household appliances

Rated capacitance: 20 … 22 µF*) Rated voltage: 350 V AC*)

– Plastic can– Terminals: 4 pin, 2 pin– Optimized for PCB mounting– Segmented film safety function optional

Designed for AC input and AC output filters e.g. UPS


Film CapacitorsAC Film Capacitors

EPCOSTDK

Series MotorCap P0 (S0) plastic MotorCap (S3) compact Super MotorCap P2 (S2) AluB3232 … B3235 … B3233 …

Technicaldata

Features

Applications

AC Film Capacitors

Rated voltage: 250, 420, 470 V ACRated capacitance: 1 … 60 µFPlastic can

– Useful life: Up to 10 000 h/class B

– Terminals: Fast-on (single/double)Insulated wire Twin core cable

– Safety class: P0 (S0)– Approvals: UL, VDE, IS

Rated voltage: 400, 450 V ACRated capacitance: 2 … 20 µFPlastic can

– Useful life:Up to 30 000 h/class A

– Terminals:Fast-on (single/double)Insulated wireTwin core cable

– Safety class: (S3)– Approvals: UL, VDE, CQC

Rated voltage: 420, 450 V ACRated capacitance: 1 … 60 µFAluminum can

– Useful life:Up to 30 000 h/class A

– Terminals:Fast-on (single/double)Twin core cable

– Safety class: P2 (S2)– Approvals: UL, VDE, CQC

General sine wave applications, mainly as motor run capacitor

Mainly as motor run capacitor, e.g. for refrigeration units, pumps

Mainly as motor run capacitor, e.g. for household appliances, heat pumps

Series Dual MotorCap MotorCap P2 (S2) AluB32335 B3333 …

Technicaldata

Features

Applications

AC Film Capacitors

Rated voltage: 250 … 450 V ACRated capacitance: 10+1 … 60+10 µFAluminum can

– Useful life:Up to 10 000 h/class B

– Terminals:Fast-on (single/double/quadruple)

– Safety class: P2 (S2)– Approvals: UL, TÜV

Mainly as motor run capacitor, e.g. for air conditioning Mainly as motor run capacitor, e.g. for household appliances, heat pumps

Rated voltage: 200, 500 V ACRated capacitance: 1 … 80 µFAluminum can

– Useful life: Up to 30 000 h/class A

– Terminals: Fast-on (single/double)Twin core cable

– Safety class: P2 (S2)– Approvals: UL, VDE, CQC


Film CapacitorsPFC Capacitors and Key Components for Power Quality Solutions

EPCOSTDK

Series PhiCap HomeCap PoleCapB32340 … A …, B32343, B32340 … J … B25671B32344

Technicaldata

Features

Applications

PFC Capacitors and Key Components for Power Quality Solutions

Power: 0.5 … 30 kvarRated voltage: 230 … 525 V ACInrush current: up to 200 • IR

– Useful life:Up to 135 000 h at temp. class –40/CUp to 100 000 h at temp. class –40/D

Power: 0.02 … 1.99 kvarRated voltage: 127 … 400 V ACInrush current: up to 100 • IR

– Useful life: Up to 100 000 h at temp. class –40/D


– Useful life: Up to 100 000 h at temp. class –40/C

Automatic capacitor banksFixed PFCDetuned PFC systems

Residential PFC Outdoor low voltage applicationsFor installation in surroundings withhigh dust or moisture concentration

Series PhaseCap Compact PhaseCap Premium PhaseCap HD DeltaCapB25673 B25667 B25669 B32300, B32303,

B32304Technicaldata

Features

Applications



– Useful life:Up to 200 000 hat temp. class –40/CUp to 150 000 h at temp. class –40/D



Power: 40 … 60 kvarRated voltage: 400 … 525 V ACInrush current: up to 300 • IR


Power: 0.5 … 30 kvarRated voltage: 230 … 525 VInrush current: up to 200 • IR

– Useful life: Up to 150 000 h at temp. class –40/CUp to 115 000 h at temp. class –40/D

Automatic PFC equipmentIndividual fixed PFCFixed PFCTuned and detuned capacitor banksAll kinds of PFC applications

Automatic capacitor banksFixed PFCAC power electronicsDetuned PFC systems

Automatic PFC equipment Individual fixed PFCFixed PFCTuned and detuned capacitor banks690 V and 800 V series forusage in harsh applicationssuch as wind turbine and industrial applications withheavy harmonic loads

Automatic PFC equipmentIndividual fixed PFCFixed PFCDetuned capacitor banks


Film CapacitorsPFC Capacitors and Key Components for Power Quality Solutions

EPCOSTDK

Series Grid analysis tool Contactors TSM modulesB44066M7777E230 B44066S … J …/N … B44066T …

Technicaldata

Features

Applications


Operating voltage: 110 … 230 V ACMeasuring current: 30, 300, 3000 AMeasuring voltage:3 x 30 … 440 V AC3 x 50 … 760 V AC

– Comfortable measuring tool– 1 GB memory card included– PC software for evaluation of

measured values included

Voltage: 400 … 690 VOutput range: 12.5 … 100 kvar

– Series J110/J230 for usage in PFC systems without reactors

– Series N110/N230 for usage in PFC systems with reactors

– cUL approval– CCC approval up to 75 kvar

Voltage range: TSM-LC(X): 230 … 690 V, depending on typeTSM-HV: 690 V

Output range: TSM-LC(X): 10 … 200 kvar, depending on typeTSM-HV: 50 and 200 kvar

– Fast electronically controlled thyristor switch

– Easy installation– Very short switching times

Three-phase measuring, display and storage of electric parameters inLV grids

Damping of inrush current in low voltage PFC systemsFor PFC systems with/without reactors

Main supply networks with high loadfluctuations for dynamic PFC systems,e.g. presses, welding machines, elevators, cranes, wind turbines

Series PF controllers Measuring devicesB44066R … B44066M …

Technicaldata

Features

Applications


Output stages: BR604: 4 relay outputsBR6000: depending on the type 6 to 12 relay and/or

transistor outputsBR7000: 15 switching outputsBR7000-I: 12 or 13 switching outputsBR7000-I-TH/BR7000-I-TH/S: 12 relay and 12 transistor outputsControlling of actual power factorConnecting/disconnecting capacitor steps

Supply voltage:MMI6000: 230 V ACMMI7000: 110 … 230 V ACMeasuring voltage:MMI6000: 230 V ACMMI7000: 30 … 440 V AC (L-N)

50 … 690 V AC (L-L)

– Compact dimensions– Panel mounting instrument– LCD display– Menu languages:

MMI6000: DE/EMMI7000: DE/E/ES/RU/TR

Accessory for PF controller BR60000MMI6000: 1-phase measuring and display of grid parametersMMI7000: 3-phase measuring and display of grid parameters

Supply voltage: BR604: 230 V ACBR6000 (from V5.0 onwards)BR7000/BR7000-IBR7000-I-TH/BR7000-I-TH/S: 110 … 230 V ACMeasuring voltage:BR604 = supply voltage 230 V ACBR6000: 30 … 525 V AC (L-N) or (L-L)BR7000: 3 x 30 … 440 V AC (L-N); 3 x 50 … 760 V AC (L-L)BR7000-I: 30 … 440 V AC (L-N); 50 … 760 V AC (L-L)BR7000-I-TH/BR7000-I-TH/S: 30 … 440 V AC (L-N) /

50 … 760 V AC (L-L)


Film CapacitorsPFC Capacitors and Key Components for Power Quality Solutions, Power Capacitors

EPCOSTDK

Series Reactors PQSine – Active harmonic filter and MKK DC/DCI, DCI-R/DC-RB44066D … power optimizer B25650 (gas), B25640 (resin),

B25750 (oil)Technicaldata

Features

Applications

PFC Capacitors and Key Components for Power Quality Solutions Power Capacitors

Voltage: 400 and 440 VOutput range: 10 … 100 kvarDetuning factor: 5.67, 7, 14%Frequency: 50 or 60 Hz

– High harmonic loading capability– Very low losses– Low noise emission– Temperature protection by

microswitch (NC)

Input voltage:3-wire: 180 V … 525 V4-wire: 180 V … 460 VRated filter current: 60 … 600 AWall and floor mounting variantsModular system– Compact design– Advanced digital control– Harmonic mitigation– Active load balancing– Ultra-fast reactive power factor

compensation (inductive and capacitive)

Rated capacitance: 100 µF … 20 mFNominal voltage: 800 … 6500 VOperating temp.: –55 … +80 °CGas impregnation (DC)Oil impregnation (DCI)Resin impregnation (DCI-R, DC-R)– High peak current handling

capability– Low losses– Long useful life– Very high reliability – Rectangular case– Flat windings– Overpressure switch

possible, self-healingAvoiding of resonance conditionsTuned and detuned harmonic filtersReduction of power losses

Datacenters, UPS systems, Green energy power generation (e.g. Photovoltaic and Wind turbines),Industrial production facilities, officebuildings and shopping centres

DC link Resonant filtersPower modules for HVDC

Series PCC LP MKP DC MKP ACB25655J …, B25655M …, B2562 … B3236 …B25655P …

Technicaldata

Features

Applications

Power Capacitors

Rated capacitance: 50 … 3000 µFRated voltage: 200 … 900 V DCOperating temp.: –40 … +110 °C

– Low self-inductivity– High volume fill factor– Very good self-healing– Compact size– Flexible dimensions– Customer specific designs


– High RMS current handlingcapability

– Self-healing– Aluminum can– Customized configurations– UL-certification

Rated capacitance: 10 … 600 µFAlternating voltage: 250 … 480 V ACOperating temp.: –40 … +70 °C

– High peak current handling capability

– Overpressure disconnector– Self-healing– Customized configurations– UL-certification

DC link for LV converters, speciallyHEV applications

DC link capacitor for voltage converters in renewable energies

Filtering for e.g. uninter ruptible powersupplies, renewable energies


Film CapacitorsPower Capacitors

EPCOSTDK

Series MKP AC HP MKK HPB2536 … B25610

Technicaldata

Features

Applications

Power Capacitors

Rated capacitance: 10 … 150 µFRated voltage: 550 … 1000 V AC

– High peak current capability– Customized configurations– Overpressure disconnector– Self-healing– Oil impregnation

Industrial and general, AC filter applications, renewable energies

Rated capacitance: from 3 x 50 µF on wardsRated voltage: up to 1000 V AC Operating temp.: –55 … +80 °C

– Low ESR– Self-healing– Reduces high THD– Delta or star connected– Rectangular case– Customer specific design– Aluminum or stainless steel case– Compact size

High performance output filtering, especially in wind power applications

Series MKK DCR MKP DC LSIB25640 B2563 …

Technicaldata

Features

Applications

Power Capacitors

Rated capacitance: up to 15 000 µFRated voltage: up to 2000 V DCOperating temp.: –25 … +80 °C

– Very low ESL– Self-healing– Open capacitors– Rectangular case– Customer specific design– Compact size (flat winding)– Resin filled– Cost optimized

DC link, industrial and renewable energies


– Different terminal types– IEC1071 approved– High peak current capability– Customized configurations– Self-healing– Low self inductance– Plastic can

Compact DC link applications


Aluminum Electrolytic Capacitors

EPCOSTDK

Series Large size Axial-lead Soldering star

Technicaldata

Features

Applications


Rated voltage: 25 … 63 VRated capacitance: 900 … 27 000 µFDimensions: 22 x 40 … 35 x 50 mm

– High vibration stability up to 40 g– High ripple current capability– Low ESR at high temperatures– Long useful life up to 10 000 h at

+125 °C


– High vibration stability up to 45 g– High ripple current capability– Low ESR at high temperatures– Long useful life up to 10 000 h at

+125 °C– High temperature range up to

+150 °C


– High vibration stability up to 45 g– Low inductance– High ripple current capability– Long useful life up to 10 000 h

at +125 °C– High temperature range up to

+150 °C– Low ESR at high temperatures

High energy efficiency in automotiveapplications e.g. power steering, motor management

High energy efficiency in automotiveapplications e.g. motor management,power steering, fan control, trans -mission control, wiper system, DC-link(≤ 250 V) for HEV

High energy efficiency in automotiveapplications e.g. motor management,power steering, fan control, trans -mission control, DC-link (≤ 250 V) forHEV

Series Screw terminals 4-/5-pin snap-in terminals Snap-in terminalsSolder-pin terminals

Technicaldata

Features

Applications


Rated voltage: 16 … 600 VRated capacitance: 560 … 680 000 µFDimensions:35.7 x 55.7 … 90 x 220.7 mm

– High ripple current capability– Long useful life (>20 years)– Self-extinguishing electrolyte upon

request– Special designs for base cooling– Optional PET insulation– Compact designs

Rated voltage: 350 … 500 VRated capacitance: 390 … 3300 µFDimensions:35 x 45 … 50 x 100 mm

– High ripple current capability– Long useful life (>20 years)– Optional PET insulation– Optional PET insulation cap on

terminal side– Compact designs

Rated voltage: 10 … 600 VRated capacitance: 47 … 68 000 µFDimensions:22 x 25 … 35 x 55 mm

Frequency convertersDC link for wind energy and solar invertersUninterruptible power suppliesProfessional power supplies

Frequency convertersDC link for solar invertersUninterruptible power suppliesProfessional power supplies

– High ripple current capability– Long useful life (>20 years)– Optional PET insulation– Optional PET insulation cap on

terminal side– Compact designs

Frequency converters DC link for solar invertersUninterruptible power suppliesProfessional power suppliesOn-board charger (e-Mobiity)



EPCOSTDK

Series Single-ended Pulse applications

Technicaldata

Features

Applications


Rated voltage: 10 … 450 VRated capacitance: 2.2 … 10 000 µFDimensions: 8 x 11.5 … 18 x 40 mm

– High temperature range up to +135 °C– Low impedance at high frequency– Different terminal configurations– Compact designs

Rated voltage: 300 … 500 VRated capacitance: 200 … 6600 µFDimensions: 25 x 45 … 50 x 100 mm

– High charge/discharge proof – Low dissipation factor– Compact designs

Automotive e.g. motor management, power steering, fan control

Professional flashlightsMobile X-ray generatorsWelding machinesHair removal devices


Electric Double Layer Capacitors

EPCOSTDK

Series EDLC212520-351-2F-50 EDLC082520-500-1F-81

Technicaldata

Features

Applications

Electric Double Layer Capacitors

Size (l x w x t): 20 x 25 x 2.1 mm (typ.)*Capacitance: 350 mF (typ.)Impeadance: 50 mV (typ.)Voltage: 5.5 V (max.)

* Termials are excluded

– To fit in small space: low profile, small footprint– To support various power demand, weak~instantaneous: wide capacitance range, low impedance– Superior cyclic life: remaining 80+% of initial cap. after 10mil.-discharge at 7 A-5 msec (i.e. LED flash type)

Size (l x w x t): 20 x 25 x 0.7 mm (typ.)*Capacitance: 50 mF (typ.)Impeadance: 700 mV (typ.)Voltage: 2.75 V (max.)

* Termials are excluded

– Energy harvesting, RF- and sensor-driving power on healthcare/wearable devices– Current assistances on high-power LED flashes, SSD back-up, audio amplifier boosting– Power supplying for NFC-CPUs, secure-ICs, e-paper displays


MagnetsFerrite Magnets

EPCOSTDK

Series FB series – FB12B, FB12H material FB series – FB9B, FB9H, FB9N material

Technicaldata

Features

Applications

Ferrite Magnets

Residual flux density: 460 ±10 … 470 ±10 mTCoercive force: 340 ±12 … 345 ±15 kA/mIntrinsic coercive force: 380 ±12 … 430 ±15 kA/mMaximum energy product (BH) max:41.4 ±1.6 … 43.1 ±1.6 kJ/m3

– Wet-molded anisotropic ferrite magnet– Further improved coercive force HCJ temperature

coefficient

– Wet-molded anisotropic ferrite magnets– Energy product with a substantially improved coercive

force HCJ temperature coefficient

Automotive electronicsHome appliances: electrical motors, actuators, appliance motors


Residual flux density: 430 ±10 … 460 ±10 mTCoercive force: 278.5 ±12 … 342.2 ±12 kA/mIntrinsic coercive force: 286.5 ±12 … 397.1 ±12 kA/mMaximum energy product (BH) max:35.0 ±1.6 … 40.4 ±1.6 kJ/m3

Series FB series – FB6B, FB6E, FB6H, FB6N material FB series – FB5B, FB5D, FB5DH, FB5H material

Technicaldata

Features

Applications

Ferrite Magnets


– Good balance of Br and Hc values at high levels– Particularly suited for high powered motors with large

demagnetizing fields

– Deliver high Br and a relatively high level of Hc.– Excellent cost performance– Suitable for a diverse range of small, high-performance

motors





MagnetsRare Earth Magnets – Nd-Fe-B Magnets

EPCOSTDK

Series NEOREC series – NEOREC53B material

Technicaldata

Features

Applications

Rare Earth Magnets – Nd-Fe-B Magnets

Residual flux density: 1450 ±20 mTCoercive force: 1120 ±48 kA/mIntrinsic coercive force: ≧1114 kA/mMaximum energy product (BH) max: 406 ±16 kJ/m3

– Magnetic characteristics reach 49MGOe in maximum energy product (BH) max, achieving 50 to 80% higher performance than rare-earth cobalt magnet

– Specific gravity is 7.4 g/cm3 more than 10% lower than that of rare-earth cobalt magnet– Higher mechanical strength such as bending and tensile strength than rare-earth

cobalt magnets, making handling easier than before

Green Energy (Wind power)Home appliancesAutomotive electronics

Series NEOREC series – NEOREC50B, NEOREC50H material NEOREC series – NEOREC47B, NEOREC47H material

Technicaldata

Features

Applications


Residual flux density: 1420 ±20 mTCoercive force: 1074 ±48 … 1097 ±48 kA/mIntrinsic coercive force: ≧1114 … ≧1353 kA/mMaximum energy product (BH) max:390 ±16 kJ/m3

– Magnetic characteristics reach 49MGOe in maximumenergy product (BH) max, achieving 50 to 80% higherperformance than rare-earth cobalt magnet

– Specific gravity is 7.4 g/cm3 more than 10% lower thanthat of rare-earth cobalt magnet

– Higher mechanical strength such as bending and tensilestrength than rare-earth cobalt magnets, makinghandling easier than before






Residual flux density: 1390 ±20 … 1390 ±30 mTCoercive force: 1035 ±56 … 1067 ±48 kA/mIntrinsic coercive force: ≧1114 … ≧1273 kA/mMaximum energy product (BH) max:366 ±16 … 374 ±16 kJ/m3



Series NEOREC series – NEOREC46HF, NEOREC46HG material NEOREC series – NEOREC45SH material

Technicaldata

Features

Applications






– Magnetic characteristics reach 49MGOe in maximumenergy product(BH) max, achieving 50 to 80% higherperformance than rare-earth cobalt magnet



Residual flux density: 1360 ±30 mTCoercive force: 1051 ±56 kA/mIntrinsic coercive force: ≧1671 kA/mMaximum energy product (BH) max:357 ±16 kJ/m3



Series NEOREC series – NEOREC44H material NEOREC series – NEOREC43SX material

Technicaldata

Features

Applications












EPCOSTDK



EPCOSTDK

Series NEOREC series – NEOREC42B,NEOREC42SH material NEOREC series – NEOREC41H material

Technicaldata

Features

Applications












Series NEOREC series – NEOREC40H, NEOREC40TH NEOREC series – NEOREC38UH materialNEOREC40UH material

Technicaldata

Features

Applications














Series NEOREC series – NEOREC37H material NEOREC series – NEOREC35NX, NEOREC35UX material

Technicaldata

Features

Applications

Rare Earth Magnets - Nd-Fe-B Magnets



– Specific gravity is 7.4 g /cm3 more than 10% lower thanthat of rare-earth cobalt magnet





Residual flux density: 1200 ±30 mTCoercive force: 920 ±56 … 923 ±56 kA/mIntrinsic coercive force: ≧2626 … ≧2388 kA/mMaximum energy product (BH) max:271 ±16 … 278 ±16 kJ/m3



Series NEOREC series – NEOREC30EV material

Technicaldata

Features

Applications



– Magnetic characteristics at the mass production level reach 49MGOe in maximum energy product(BH) max, achieving 50 to 80% higher performance than rare-earth cobalt magnet

– The specific gravity is 7.4 g/cm3 more than 10% lower than that of rare-earth cobalt magnet.Ideal for meeting miniaturization and weight reduction needs

– Higher mechanical strength such as bending and tensile strength than rare-earth cobalt magnets,making handling easier than before

– Since the main raw materials are neodymium and iron, both abundant resources, stable supplyis assured


EPCOSTDK


Transparent Conductive Film ITO Transparent Conductive Film

Series FLECLEAR series – Sputtered ITO films

Technicaldata

Features

Applications

ITO Transparent Conductive Film

Base material: PET 125 µmInitial surface resistance: 150 V/sqTotal light transmittance: 92%Haze: 0.5%

– Exhibits excellent flexibility, while realizing high bend resistanceand slidability

– Capable of coating various types of base materials– Available in film rolls and film sheets

For electrode films and plastic plates for transparent touch panelsFor electronic paper/electronic books/electromagnetic wave shields

EPCOSTDK

Wireless Charging


EPCOSTDK

Series Receivers solutions Transmitter solutions WLC + NFC combo coils Rx module

Technical data

Features

Applications

Wireless Charging

TDK offers a full range of passive technologies and products for wireless power transfer according withspecifications of the Qi consortium.Qi Shielding materialsQi Tx coil solutionsQi Rx coil solutions, including combos with NFCQi Rx modules

– Ultra low profile– High performance

– Custom design possible – Ultra low profile– High performance

SmartphonesMobile devicesTablet PCAudio video applicationsHealthcare applicationsAutomotive applications

77

Important Notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements aboutthe suitability of our products for certain areas of ap-plication. These statements are based on our knowledgeof typical requirements that are often placed on our prod-ucts in the areas of application concerned. We neverthe-less expressly point out that such statements cannot beregarded as binding statements about the suitabilityof our products for a particular customer application.As a rule, EPCOS is either unfamiliar with individual cus-tomer applications or less familiar with them than the customers themselves. For these reasons, it is always ul-timately incumbent on the customer to check and decidewhether an EPCOS product with the properties describedin the product specification is suitable for use in a partic-ular customer application.

2. We also point out that in individual cases, a malfunc-tion of electronic components or failure before theend of their usual service life cannot be completelyruled out in the current state of the art, even if they areoperated as speci fied. In customer applications requir-ing a very high level of operational safety and especially in customer applications in which the malfunction or failureof an electronic component could endanger human life orhealth (e.g. in accident prevention or life-saving systems),it must therefore be ensured by means of suitable designof the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by thirdparties in the event of malfunction or failure of an electron-ic component.

3. The warnings, cautions and product-specific notesmust be observed.

4. In order to satisfy certain technical requirements, some ofthe products described in this publica tion may containsubstances subject to restrictions in cer tain jurisdic-tions (e.g. because they are classed as hazardous).Useful information on this will be found in our MaterialData Sheets on the Internet (www.epcos.com/material).Should you have any more detailed questions, please con-tact our sales offices.

5. We constantly strive to improve our products. Conse -quently, the products described in this publicationmay change from time to time. The same is true of thecorresponding product specifications. Please checktherefore to what extent product descriptions and speci-fications contained in this publication are still applicablebefore or when you place an order.

We also reserve the right to discontinue productionand delivery of products. Consequently, we cannotguarantee that all products named in this publication willalways be available.

The aforementioned does not apply in the case of individual agreements deviating from the foregoing forcustomer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “Gen-eral Terms of Delivery for Products and Services in the Electrical Industry” published by the GermanElectrical and Electronics Industry Association (ZVEI).

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode,CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap,DigiSiMic, DSSP, FilterCap, FormFit, LeaXield, MiniBlue,MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV,SIP5D, SIP5K, TFAP, ThermoFuse, WindCap aretrademarks regis tered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.

78

The world of electronic components, modules and systems within a mouse click

www.epcos.comwww.global.tdk.com

© EPCOS AG · A TDK Group CompanyEdition 2015 · Ordering No. EPC:65060-7600 · Printed in Germany · PP 111410.

Documents

TDK & EPCOS Product Survey 2015 for components/misc/1095.pdf · 2016-06-08 · Series Resonant transformers Flyback transformers Choke coils SRV series SRW series PFC series Technical