Técnico iSOFT - Masermic

Manual Técnico iSOFT

Versión 11.4

1

iSOFT

Manual Técnico

Referencia:

iSOFT-AMHS02 – M. Técnico

Versión:

Ver. 11.4

Fecha:

Mayo 2016


Versión 11.4

2

1. PRESENTATION ....................................................................................... 4

2. DOCUMENTATION RESULTING ............................................................. 5

2.1. DOCUMENTATION CONTENTS ................................................................................. 5

3. REQUIREMENTS ....................................................................................... 6

3.1. HARDWARE REQUIREMENTS .................................................................................. 6

3.2. REQUISITOS SOFTWARE .......................................................................................... 6

4. SOFTWARE INSTALATION ...................................................................... 7

5. ISOFT USER´S MANUAL ........................................................................ 11

5.1. LANGUAGE ............................................................................................................... 11

5.2. DB SYSTEM ............................................................................................................... 11

5.3. SOFTWARE LOADING SCREEN .............................................................................. 12

5.4. SERVER INITIAL SCREEN (SQL- SERVER AND MYSQL VERSION) ........................... 13

5.5. KEY ENTER WINDOW .............................................................................................. 14

5.6. MAIN WINDOW.......................................................................................................... 15

5.7. CONFIGURATION ..................................................................................................... 18

5.7.1 Application configuration ....................................................................................... 18

5.7.2 Links configuration ................................................................................................. 21

5.7.3 iLogs configuration................................................................................................. 22

5.7.4 FTP configuration .................................................................................................. 23

5.7.5 Email configuration ................................................................................................ 24

5.7.6 iLogs description .................................................................................................... 25

5.7.7 Setting table configuration ..................................................................................... 26

5.7.8 Factors configuration ............................................................................................. 27

5.7.9 Historian Tag configuration .................................................................................... 29

5.7.10 User configuration ............................................................................................. 30

5.8. CONFIGURATION ..................................................................................................... 31

5.8.1 Call Historical data ................................................................................................. 31

5.8.2 Historical data ........................................................................................................ 32

5.8.3 Historical alarm data .............................................................................................. 35

5.8.4 Historical system data............................................................................................ 36

5.8.5 GSM / GPRS alarms.............................................................................................. 37

5.9. TASKS ....................................................................................................................... 38

5.9.1 Manual configuration uploading ............................................................................. 38

5.9.2 Manual HD loading ................................................................................................ 39

5.9.3 Manual HD serial loading ...................................................................................... 40

5.9.4 Enable resending configuration ............................................................................. 41

ÍNDICE


Versión 11.4

3

5.9.5 File conversion ....................................................................................................... 42

5.9.6 Battery ................................................................................................................... 43

5.9.7 Communication window ......................................................................................... 44

5.9.8 Call schedule ......................................................................................................... 45

5.9.9 Scade map ............................................................................................................. 46

5.9.10 Centralita feature ............................................................................................... 48

5.9.11 Events information ............................................................................................. 50

5.10. FILE SYSTEM AND DB INTERNAL STRUCTURE ................................................................. 51

5.10.1 Historical txt system structure ........................................................................... 51

5.10.2 DB system structure .......................................................................................... 52


Versión 11.4

4

1. PRESENTATION

ISOFT application is a client software for communication among iLOGS family loggers and a computer with the purpose of managing, handle and monitoring data. iSOFT integrates GSM/GPRS binary modbus protocol for data transferring among loggers and remote PC software. Through ISOFT the user can have full control of the existing loggers in one installation by monitoring their status and managing history logs transferring towards the computer workstations. The application has been developed for 32 and 64-bit architectures and Windows operating system. The user-machine interface is carried out both through the keyboard and mouse. Application features:

Clarity when monitoring the status and configuration of the elements that compose the installation.

Reliability in the usage and treatment of a great amount of information based on the installation historical data.

Quick configuration of all features that compose the communication.

Use of powerful tools for the management of the components that take part in a communication.

Ease of use of different elements that compose the application.

Finally, highlight that the GSM modem Works using a SIM card the user must acquire and insert it in its emplacement similarly to the way it is done in a mobile phone. On the other hand, gor GPRS communications it will be essential have internet connection into PC, with static an public IP. If not, it will be required redirecting modem input communications to enabled IP/ Port form iSOFT communications. Our technical department welcomes any suggestion for improvement transmitted with the aim of product innovation, adapting it to the evolution operating needs.

INTRODUCTION


Versión 11.4

5

2. DOCUMENTATION RESULTING

This documentation contains information related to the use and management of the software ISOFT. Even so, sometimes reference to techniques and functions proper of Windows environment where the software has been developed are included. If the user wants to take advantage of all communication capabilities between ISOFT and a user’s application is highly recommended to get familiarised with the development of tools under Windows environments.

2.1. DOCUMENTATION CONTENTS

This reference manual is divided in 2 sections which in turn are divided in sub-sections:

1. Introduction: covers all aspects of the use of this documentation, the employed terminology, a depiction of general elements (controls, environment, printer) the user is going to utilise when working with this application as well as the needed requisites for its correct functioning.

2. User’s Manual: contains all the necessary information to configure and manipulate any of the different options and possibilities the application contains.


Versión 11.4

6

3. REQUIREMENTS

3.1. HARDWARE REQUIREMENTS

Minimum requisites are described next:

RAM Memory: minimun 2 Gb; System performance increases with memory.

Microprocessor speed upper 2,5 GHz.

Hard Disk: required a minimum of 1 Gb free space.

GSM communication working Serial port or Serial-USB converter for switch on desktop modem

GPRS communication working Ijnternet connection. PC would have to be visible and accessible from outside for iLogs calling process. Use methods: - M2M service. - Create communication bridge into the modem: network public IP redirect to

PC prívate IP.

256 Mb graphic card

Monitor: Minimun 15’

Mouse.

3.2. REQUISITOS SOFTWARE

ISOFT application has been developed to work under Windows operating system. Depends which DB system management will you use with iSOFT, you must install corresponding software. Microsoft Access, SQLServer or MySQL Server are three options that works iSOFT.

INSTALATION


Versión 11.4

7

4. SOFTWARE INSTALATION

To install this software access to our web page www.masermic.com from the web browser and download Software iSOFT link within the tab Environment.

After download, start installation program clicking the file. The installation wizard will guide the user during the process.

http://www.masermic.com/


Versión 11.4

8

Clicking next appears the license agreement terms.

After agree the terms conditions, clicking Next appears the option selection screen.


Versión 11.4

9

The functionality of each option is described next:

Driver CCX_CRD (v1.0): Libraries in charge of communication between iLOGS commercial version 1 (LOGS45 – LOGS46 version) and PC modems at a low level.

Driver CCX_CRD (v2.0): Libraries in charge of communication between iLOGS commercial version 2 (LOGS47) and PC modems at a low level. To load a new CCX-CRD Driver version it is needed to uninstall the previous version by means of the Uninstall previous ver. button.

Before starting installation the system shows a summary with the selected configuration including directory path and shortcut folder.


Versión 11.4

10

Clicking Next button, the system start the installation process.

The installation finishes showing the following message.


Versión 11.4

11

5. ISOFT USER´S MANUAL

5.1. LANGUAGE The first time the software starts, system requests the language you are going to work within iSOFT. By default it selects OS language. Click on the expected option and continue with the DB system selection.

5.2. DB SYSTEM In this window we must select DB system which it will work. Once it is selected, the DB system will be registered into iSOFT software. Also, it will be modified from configuration screen.

USER MANUAL


Versión 11.4

12

If we select without DB system option, iSOFT will disabled majority of available options, and it works only for communication function and historical data file decoding function. There are two options linked with SQLServer management system

1. First option (SQL Server) allows historical data organization structured in

different DBs. It will be created one DB for each current month and year.

2. Second option (SQL Server R) allows historical data organization structured in a unique DB defined for the user, where all tables associated to each iLogs will be saved here.

5.3. SOFTWARE LOADING SCREEN When booting the software an initial screen pops up. It is in this screen where the necessary files are initialized. This screen also shows corporation and software data.


Versión 11.4

13

5.4. SERVER INITIAL SCREEN (SQL- Server and MySQL version)

Screen only linked to ISOFT (SQL Server and MySQL) version. Once the application is started, the system tries to make a connection with a configured SQLServer or MySQL server If data access values are not right defined iSOFT shows this window to configure it.

Configure data:

Server: Registered servers. The list shows all existing server suitable connections if the selected option is SQLServer. If you have select MySQL you must write manually server IP or name

User and password: Needed when using security server connection.


Versión 11.4

14

Ordered menú options:

Try: To try connection with a configured server.

Save: It is highly recommended to save configuration.

Change DB system option

Start iSOFT after test and save connection properties

Exit from iSOFT Window options:

Create DB system: Create DB system which manage data inside iSOFT.

Create historical DB: Enable option to create historical DB which manage receive data from iLogs (only for SQLServer (R).

5.5. KEY ENTER WINDOW

System access window with registered user data. Task for creating and change registered users is just for the administrator.

You can disable user identification option from Application configuration window. Note: Administrator’s data by default are as follows: Usuario: DIT Pass: DIT


Versión 11.4

15

5.6. MAIN WINDOW

From this window we can watch links, communication and registered iLOGS state within iSOFT. We also can get on into all possible functionalities with upper menu.

On the main window header it shows a line defining some system configuration parameters.

iSOFT application version.

Current system user.

Defined DB system.

Received and saved into DB system register format. Main window structure:

Upper literal menu: Access into a different system options divided into a sections.

Visual submenu: Access into tasks associated with the selected option in the upper menu. To see task description put the mouse over the icon.

Language change button English / Spanish

System link panel: This box monitors all configured links and also their current status- active, deactivated or communicating. It also displays some of their


Versión 11.4

16

characteristics such as the name of the link, the coverage level. Pressing the associated button the user can pause or resume the link.

Task state info buttons: On top of iLogs table there are some info and access buttons into a different system tasks.

On the left it shows a button that report the system has received alarms from some iLogs without confirmation.

On the right it shows a button that shows if there is enabled FTP resending or email resending tasks.

Registered system iLogs table. Each register row information:

iLogs ID. Link associated to logger. Serial number. iLogs name. Logger name (given by user or taken ID by default). Phone number of the SIM inserted in the logger. Communication mode of the logger (GSM o GPRS). iLogs has made last call datetime value. Finished last call datetime. Last day number of calls. iLogs firmware versión. iLogs comercial versión. iLogs model.


Versión 11.4

17

On the right there is a button to change watching table columns.


Versión 11.4

18

5.7. CONFIGURATION It is a section where you can define communication parameters, management and system data display options. 5.7.1 Application configuration

. System management parameters define Sub-section. System directories iSOFT system manages own directories.

Log files

Directory of the plain text files with decoded information sent from iLogs.

Configuration

The first time a logger connects with the software, it sends the configuration data writing in a custom format files.

DB Access

Directory where it is saved access DB files (Historical and System data)

DB Security

Directory to save last security DB system copies

CSV files Default directory where CSV files are saved on Historical Windows using related options


Versión 11.4

19

Conversion files Directory for save conversion files into related task between existing two format for Historical files. System control Enable / disable control options

Create security copies

Hard disk and alarm loud warnings

Phone number prefix linked with iLogs

iLogs identification primary variables

Monitoring and control iSOFT current state options.

Selected current DB system.

Txt files and historical table register formats.


Versión 11.4

20

DB server Define SQL Server – MySQL management linked parameters

On the left panel it shows server parameters connection. You can check and test the connection. On the right it shows DB name were manage system historical data (just for SQLServer(R). You can create new DB or change current DB. Wonderware connection Define connection parameters to save straight data into Wonderware Historian DB system server.


Versión 11.4

21

5.7.2 Links configuration

Window where you can define communication links to use between iLOGS and iSOFT information sending.

Upper menu there are Create / Delete / Change options. After click onto Create / Change options, it enables link configuration boxes. Define parameters: o Communication mode

GSM: (Time data transmission mode). This mode is enable just for existing type modems. Current recommended modem is FastTrack Xtend.

GPRS: This modem use socket to communicate directly with PC where is installed iSOFT. Listen port will be free and PC where is installed iSOFT should have static and public IP, or on the other hand, redirect communication inside the network modem

o General

Link name.

System distributor code.

iLogs model linked with created link

o Reactivation parameters Define inactivity max interval before start reactivation state


Versión 11.4

22

After parameter definition use Save button to continue with link start or Back button to cancel. On the right of the window it shows a resume table with all links registered in the system.

5.7.3 iLogs configuration

This Windows shows us registered iLOGS on the system. Clicking each one we can see it’s configuration.

On the left, it shows a list with all iLOGS registered on the system. We can remove some registered iLogs clicking upper Delete button. On the right, it shows selected iLOGS information data from the list, splitted in tabs. Inside each tab information is organized by groups o by register tables.


Versión 11.4

23

5.7.4 FTP configuration

This option allows us upload created historical file into defined FTP server. When this option will be enabled the system will upload files automatically after reception.

Window is divided:

Upper menu for enable FTP task, save configuration or exit.

DB server panel FTP server parameters link definition.

List with received historical txt files sent from iLOGS. This list is used to make this action manually. To make task select files and click bottom button. The task will start then.


Versión 11.4

24

5.7.5 Email configuration

This feature allows us send received txt files to different email addressees. This action will make automatically after receive information from each iLOGS.

Window is divided:

Upper menú to enable email resending feature, save configuration or exit.

Outgoing mail definition parameters panel.

Different sending creation grou panel.

iLogs panel list to resending information

Define which type of historical data would be resending.

Addressee definition panel which are going to receive historical information, associated with the group.


Versión 11.4

25

5.7.6 iLogs description

With this option you can assign a description string for each iLOGS. In this description it may represent i.e. iSOFT localization. Once iLOGS description is defined, throughout the system this name would be showed.

This feature defining parameters:

Link selection.

iLogs selection.

Define description.


Versión 11.4

26

5.7.7 Setting table configuration

This feature allow adjust received variable value, either by 0 value rounding, or by full scale setting which could suffer analogic inputs.

This feature configuration parameters:

Select link

Select iLogs

Define max, min and variable setting value

On the right we can watch configured settings on tree format. Each branch shows a configuration linked with the root.

Enable feature with check option.


Versión 11.4

27

5.7.8 Factors configuration

Through this window, we can add automatic conversion factors into received variable values. The result of arithmetic operation is assigned and saved into the table in the DB system. Saved values are used for historical display, into the scade window property or to register values into HistorianTag when Wonderware system feature is enabled.

This feature configuration parameters:

Select link.

Select iLogs.

Select the variable associated to arithmetic operation to open a calculator which provide existing arithmetic options.

Defined variable value related unit.

When you define compute consider:


Versión 11.4

28

If mathematic equation haven’t got X variable, then received signal value will multiply for the result of making operation

If mathematic equation include X variable, this variable will be replaced by received signal value, before make operation

If there is Y variable into the equation, its value will be replaced by previous value linked with the variable

You can add arithmetic operations into the equations are: add, subtraction, divide, multiply and exponential, in addition to add brackets .

On the right table we can watch all configured factors for each iLOGS

On top of the window there are two checked activations:

Save the result of the arithmetic operation into the DB system.

Save arithmetic operation value into the Historian DB system, associated with Wonderware, and defined with linked Tag


Versión 11.4

29

5.7.9 Historian Tag configuration

This feature allows us save received data directly into Historian DB system associated with Wonderware scada.

Steps to create Tags

Select link

Select iLOGS.

Select variable point of origin to save data into Historian.

Write TAG name used in Wonderware Historian system where data are saved.

After Historical data are received from iLOGS, the system automatically will check register TAGs into the system, and will save data into Historian DB for that values associated with defined iLOGS variables.


Versión 11.4

30

5.7.10 User configuration

Configure user login releases by administrator. To get in you should write administrator pass.

Once inside, the administrator might create, edit or delete users with different features releases along iSOFT.

Enabled user releases are Edition and Display


Versión 11.4

31

5.8. CONFIGURATION

Into this section we can watch all historical values created by iSOFT.

Into all Historical Window there are common features:

Manual data sending watched into the table to email addressee.

Print table data filter with linked printer.

5.8.1 Call Historical data

From iLOGS to iSOFT doing all calls summary via any link communication.

The window is divided: On the left there are all enabled option filters to data display:

First and last displayed datetime filter. Default range can change into application configuration window inside control tab.

Link filter

iLogs filter

Linked phone filter

Call action linked filter: Historical data, Var. Group, alarm historical data, GSM / GPRS alarm, Configuration data.

You can check two type of display:

Display calls with regard to defined upper filter.

Display calls linked with last started system sesión.


Versión 11.4

32

Upper zone there are two boxes with current linked filter call number and with correctly finished calls ratio. On the right it shows a grid with all call registers associated with selected filters.

5.8.2 Historical data

Display received historical data from iLOGS to iSOFT system. Note: This window have a buttons which allows maximize / minimize different

areas existing into the window

The window is divided: On the left there are allowed filter options to data display:

This option allow save pre-configured patterns to use in future sessions without have to make filter again.


Display historical data type: Historical data or Variable group.

Select display variable into the graphic or into the table. You can define max. 6 variable display into the same graphic. Each selection register is defined by:

o Link

o iLogs


Versión 11.4

33

o Display variable

o Variable types: Registered, Local, Logsbee variables or Factoring.

o You can define arithmetic operation for current selected variable. Allows arithmetic operations are the same as in Factor configuration feature

After click Display button Filter panel is hide, and graphic and historical vgrid table area is maximized.

Data area is divided in two sections:

Upper area match with historical data table. Table format depends by current system data structure

o Register by variable format Table constaints columns Date, Description, iLogs, Variable name and Value

o Column by variable format Table constaints columns Date, Description iLogs and one column for each selected variable.

The system allows create CSV file with filter data into the table.

On the botton is located selected variable graphic. There are two ways to create graphic zoom:


Versión 11.4

34

o Pushing mouse left button and dragging on over the graphic, in such a way the system will create red rectangle with selected area. When the button is released, the system updates the graphic with selected area.

o On bottom right there is extensión button which allows display filter bounds panel. You can define max / min bounds writing values into corresponding boxes.

There is a button associated with the graphic to go back into making graphic zoom.


Versión 11.4

35

5.8.3 Historical alarm data

Display received historical alarm data from iLOGS to iSOFT system.

Window is divided: On the left there are available filter options to data display:


Link filter.

iLogs filter

Linked phone filter

Alarm type filter: Incidence event. SMS alarm, Internal event

On the right it shows a table with all alarm registers referred to selected filter. In a lot of cases, Texto column value is defined by internal system codification. Visit the provider to ask for alarm codification table


Versión 11.4

36

5.8.4 Historical system data

Display internal system data registers created by iSOFT

Window is divided: On the left there are available filter options to data display:


User

Event On the right it shows a table with all system registers referred with selected filter


Versión 11.4

37

5.8.5 GSM / GPRS alarms

Window to manage received GSM / GPRS alarms into the system.

On the window top it shows a table with system received alarms place to be confirmed. If there are pending alarms, on the iSOFT main Window it shows a button with direct entry into alarm manage window.

The window allows valídate all pending alarms or on top table selected registers by the user. After validate, related registers go to bottom table, where it shows to the user action has been validated.


Versión 11.4

38

5.9. TASKS

5.9.1 Manual configuration uploading

You can load a iLOGS configuration into the system, using previously sent configuration files or throught iCONFIG software generated files.

Steps:

Select link associated to iLOGS. Automaticatly the system point us if link is

defined for iLOGS45 / iLOGS46 or for iLOGS47 communications

Select iLOGS names to load configuration into the system.

Click Save button

The system start a background task which time length relies from selected

iLOGS

Note: Check if selected iLOGS version match with the link. Otherwise, system creates

missing data.


Versión 11.4

39

5.9.2 Manual HD loading

This feature allow load manual .TXT files, created previously and related with

historical variables into current DB system.

You can also filter historical files by register iLOGS name into the system.

Steps:

Select Historical files to load into the system

Click Save button.

It starts load task, and on top, it shows task rate and the index of current file

from the total.


Versión 11.4

40

5.9.3 Manual HD serial loading

This feature allows load manual HD historical . txt file linked to iLOGS and created

with iCONFIG software via serial line.

After HD.txt is created using iCONFIG Master Mode option, locate file into available

directory by iSOFT

Steps:

Select HD.txt file into Path box

Select iLOGS file associate with the file.

Select Link and iLOGS.

Click Save DB file button

Note: iLOGS Historical file data is saved just if iLOGS configuration have the

same register variable group as registerd into HD.txt


Versión 11.4

41

5.9.4 Enable resending configuration

This feature check into the system the next time iLOGS communicates with iSOFT , it sends configuration again.

Steps:

Select link

Select iLOGS

Click button enable resending


Versión 11.4

42

5.9.5 File conversion

This feature allows historical data txt file conversion between two existing formats in the system.

Step:

You can filter file list by register iLOGS name into the system.

Select conversion type to make..

Select related iLOGS model with current files.

Click Save button.

It starts load task, writing process rate and file index from the total.

Performed files are saved into defined directory in Application Configuration

window

Note: Select just a files which its internal formats will be the same as selected

starting conversion in the point 2. If not, will not create new file with new format.


Versión 11.4

43

5.9.6 Battery

Display internal battery of each iLOGS registered into the system.

This window allow display iLOGS battery filter by link

Each register column indicates:

iLOGS name

Battery rate: When iLOGS battery use is higher tan 50% register shows in

orange. On the other hand if iLOGS battery use is higher than75% register

shows in red.

Register battery last update received.


Versión 11.4

44

5.9.7 Communication window

This window shows system registered iLOGS window communication opening range.

That means, the time interval when each iLOGS switch on the modem and allow

communicate with it via remote with iCONFIG software

On the left list you can filter displaying iLOGS, selecting referred time range.

If you select 24H it shows all system registered ILOGS communication window.


Versión 11.4

45

5.9.8 Call schedule

You can check weekly Schedule, where each registered iLOGS tick its last

communication date time in time slot within the table and associated with current link.

Each time you select link, system starts analysis task to check the time slot assigned to

each iLOGS. This task shows through a progress bar.

Once this task has finished, into each assigned box for day / time, it shows the last

iLOGS which has had a communication event in this interval for this link. It also shows

iLOGS call finished time


Versión 11.4

46

5.9.9 Scade map

This feature allows display system registered iLOGS within the map, just like the last

values of registered values.

Steps:

Create new map writing the name.

Select map background.

Load those iLOGS we want display inside the map. To do this use mouse right

button into the map.


Versión 11.4

47

Use directional arrow inside the panel to move table values into the map.

We also can move iLOGS image using mouse left button on it.

Save system map configuration.

On top of the window there is a button called Next map to allows load different

system saved maps.

If we want display factorized values linked with variables we must click on related

option on the window right.


Versión 11.4

48

5.9.10 Centralita feature

This feature is used to create a bridge between multiple iLOGS and iCONFIG software. Any iCONFIG can ask for iLOGS list that has its communication window open and redirect to centralita at this moment, and ask for remote connection. Once communication link is created centralita feature works as transparent bridge

Centralita require two independent communication channels. One for iLOGS and other one for iCONFIGs.

Steps:

Select iLOGS model with which centralita deature Works.

By defect our system shows prívate IP linked with current PC

Define communication sockets for iCONFIG and for iLOGS.

o Defined port for iCONFIG, link from iCONFIG software enter on Communications Chanels. In this window exists Centralita socket box to set up.

o iLOGS communication port is defined in admnistrative data tab inside

Communication type window section. The link toward centralita is enabled when iLOGS has its communication window open.

Advanced configuration associated with centralita parameters.


Versión 11.4

49

o Keep Alive Frecuency: When a iLOGS links with Centralita feature, it sends a message regularly. This allow to know iLOGS state and support communication. Default frecuency is 10 seconds.

o Lost Max Keep Alive: It points max. number of service messages it should lose before to consider iLOGS has stopped communications.

o Timeout: Each sent messages from Centralita to iLOGS requires a

verification. This field point waited time before consider lost answer.

Note: It is important point that Timeout should be lower Than Keep Alive Frecuency. When it send service message, we should wait a response before start a new service message. If not, two messages collides. o Enable Log: Switch on or switch off hard disk debugging store.

Once connection parameters are saved, use start button on upper area to leave the system in connection mode. On the rigth we can watch iLOGS and iCONFIG which require centralita connection. Once the connection toward iLOGS from iCONFIG has been completed, a register is created into Links panel. Events panel shows completed actions towards centralita. Although window is closed, Centralita feature is kept in the last state before close. If the Centralita is kept on enable state it shows a button on the main window.


Versión 11.4

50

5.9.11 Events information

Pantalla que muestra información referente a los eventos de comunicación y del sistema que se van generando dentro del iSOFT. This window shows information referred to an events communications and the system that are built into iSOFT.


Versión 11.4

51

5.10. File system and DB internal structure

5.10.1 Historical txt system structure

Decoded historical data file has a name

Path \ IdDL-dd_mm_yy-hh_mm_ss.txt.

Path refers to Log file configured box into application configuration section. iSOFT works with decoded plain files after receiving information. System accessible two format definitions are:

Register by variable format Each line has information about one variable. The line fields information are:

• Time-Stamp en el formato YYYY/MM/DD, HH:MM:SS • Calling iLOGS CRC configuration.

• Variable ID • Variable name • Variable value. (Decimal separator would be configured with

SEPDEC_LINEAPORVARIABLE field inside CCX_CRD configuration file).

Coma is a Separator character between each element.

2016/04/04 04:00:20,9414,151,CAUDAL1 -F ,4.694542

Column by variable format Each line has an information about all register variables.

• The first line has name and units of all variables. • Next lines have information about all variables defined in Register task

inside iLOGS configuration.


Versión 11.4

52

5.10.2 DB system structure

After the information has been decoded within defined directory using plain txt files, DB system information management starts. The system will work with different DB system structures: Access 2003 y Access 2007-2010

The structure is similar in both of them. It differs only in the directory where the information is saved.

System DB It is created one DB for each type of saved information. DB inside information is divided into tablas which are referred to existing links or register iLogs. Directories: Access 2003 Sistema Folder Access 2007 Sistema2007 Folder

Historical data DB The information is divided in directory structure just like that:

Path\H_Year\H_MonthYear\Data_directory Within the directory BD_H_Datos.mdb or BD_H_Datos.accdb is created. In each one created DB, it will be set up a table for each register iLogs into the system.

Microsoft SQLServer y MySQL Both of them DB system have similar structure. It is defined a DB server to register information.

System DBs Once server is defined, within the server is created system DB by saving type of information. Inside, the information is divided in tables which are referred to the links and iLOGS.

Historical DB Each one historical data type are divided into DB where the DB name define the month and year of the saved historical type i.e. the format for historical DB name will be: HD_MontYear. Inside each DB is defined a table with registered iLOGS name inside the system where year / month linked data are saved.


Versión 11.4

53

Microsoft SQLServer (Reduced) This option reduce SQLServer manage system structure loading more information into each database.

System DB It is created one DB with name config_iSOFT where group all tables linked with the system. Each table is referred to an information type in addition it include one column to place link ID or iLOGS ID

Historical DB Administrator user define rhe name where save all received historical data from iLOGS. Once defined DB, it is created a table for each registered iLOGS into the system with this format: HD_NameiLogs Inside it is stored all received historical registers from iLogs into the table.

Table structure

All DB system internal structure management is the same. Existing columns in each table are:

Fecha Datalogger CRC Conex Nombre Valor

In addition, are added some columns referred with variable factorization:

NombreF ValorF UnidadF


Versión 11.4

54

2011 © Ninguna parte del documento puede ser reproducida sin autorización expresa de Microelectrónica Maser, SL. Debido a la dinámica de innovación continua,

este documento está sujeto a cambios sin previa notificación. Microelectrónica Maser, SL no responderá de daños materiales o personales originados en un

mal uso de este documento o en errores u omisiones en la información contenida por él.

Email: [email protected]

www.masermic.com

Poligono Kurutz Gain 6A

20850 Mendaro - Gipuzkoa

Tel: +34 943 742669

Fax: +34 943 743077

Documents

Técnico iSOFT - Masermic