TCAT22 Specification Sheet - · PDF fileIC RATING IC label is standard ... TCAT22-50MLG 3844 31 124.0 TCAT22-30HLG 3558 30 118.6 ... PHOTOMETRIC DATA ENERGY DATA Total Luminaire Efficiency

Page 1/10 Rev. 04/05/18

TCAT222' × 2' LED Twin Contemporary Architectural Troffer

© Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com

LED / TCAT22

Catalog No.

Project Name Type

Date

PROJECT INFORMATION

CONSTRUCTIONLuminaire housing, reflectors and end caps are die formed code gauge cold rolled steel. High transmission extruded acrylic lenses feature custom formulation for high efficacy without pixelation.

SHIELDINGRemovable lenses and center channel for easy access to LED module and electrical components.

FINISHAll reflective surfaces are finished after fabrication with unique formula high reflectivity matte white paint for soft, uniform illumination.

INSTALLATIONAn access plate is furnished with each luminaire for fast wiring access without the necessity to open the fixture or wireway.

FEATURES

• Twin lens configuration

• High efficiency acrylic lenses feature custom formulation for high performance without pixelation

• Appropriate for offices, schools, medical, and public spaces

• 60,000 hour LEDs at L80 (up to 86,000 projected life) for reduced maintenance*

• LED modules and electrical accessible from below

• Optional architecturally styled integration of daylight and occupancy sensor(s)

• QR code traceability

• Compatible with Dual-Lite inverters

• Recessed, surface or cable mount

• Optional SpectraSync™ offers three modes of tunable white solutions and integrates seamlessly into a variety of control systems

• NX Distributed Intelligence™ provides options for standalone and networked integrated sensor with wired or wireless connectivity for NX system deployments

• DLC® (DesignLights Consortium) Qualified, with some Premium Qualified configurations - see www.designlights.org

• Five year warranty (Terms and Conditions apply)

* Lifetime hours based on TM21-11 calculations

IC RATINGIC label is standard for recessed products.

CEILING COMPATIBILITYLuminaire fits recessed exposed Grid ceilings (G); four integral NEC compliant T-bar clips are standard. Can be placed in Slot Grid (SG) style ceiling with regress 3⁄8" above ceiling plane. A Flange Kit (FK) accessory is available for recessed hard ceiling applications. Surface Mount (SM) option allows placement below ceiling plane. Cable Mount (CM) option allows suspension below ceiling plane.

CERTIFICATIONAll luminaires are built to UL1598 and 2108 standards, and bear appropriate CSA labels. Damp location label standard. Emergency-equipped fixtures labeled UL 924 and Dry Location unless specified. Adheres to LM79, LM80, and TM21 industry standards. DLC® (DesignLights Consortium) Qualified, with some Premium Qualified configurations. Please refer to the DLC website for specific product qualifications at www.designlights.org. NX is available in U.S., Canada and Mexico. For other locations consult factory.

WARRANTYFive year warranty (Terms and Conditions apply).

COMPATIBLE WITH:

TCAT22

INTERACTIVE MENU

• Ordering Guide

• Product Availability Tables

• Photometric Data

• Dimensional Data

HUBBELL CONTROL SOLUTIONS

• SpectraSync™ Overview

• SpectraSync Product Availability Tables

• NX™ SpectraSync Solution Guide

• NX In-Fixture Solution Guide

EXTERNAL LINKS

• NX Distributed Intelligence Brochure

• SpectraSync Brochure

ANCHOR

™

https://www.hubbell.com/hubbelllightingci/en/

https://www.hubbell.com/columbialighting/en/

http://www.hubbell-automation.com/products/spectrasync

https://www.designlights.org/

https://www.designlights.org/

https://www.hubbell.com/hubbellcontrolsolutions/en/Products/Lighting-Controls/Lighting-Controls-Sensors/NX-Distributed-Intelligence-Lighting-Controls/NX-Distributed-Lighting-Controls-System/p/2135913

https://hubbellcdn.com/brochure/HCS_SpectraSync_Brochure.pdf

https://hubbellcdn.com/brochure/HCS_NX_Brochure.pdf

DRIVERE Fixed Output10

ED 0-10V DimmingED1 0-10V 1% DimmingESD Step Dimming3,10

LUTH Hi-lume 1% EcoSystem LED driver with Soft-on, Fade-to-Black dimming technology3,4,10

LUT5 5-Series EcoSystem LED driver3,4,10

EXAMPLE TC AT22-35HLG-ESDU

YOUR ORDER

22

ORDERING INFORMATION

SIZE 22 2' × 2'

MODELTCAT LED Twin

Contemporary Architectural Troffer

TCAT

TCAT22 – – –

––

LUMEN OUTPUTVW Very Low WattMW Medium WattLW Low WattML Medium LumenHL High LumenVL Very High Lumen14

See Product Availability Table on following pages.

CEILING TYPEG Grid Lay-in1

SM Surface Mount12

CM Cable Suspended Mount2

COLOR TEMPERATURE

30 3000K35 3500K40 4000K50 5000K

2750T 2700K-5000KSpectraSync™ Tunable White5

2765T 2700K-6500KSpectraSync™ Tunable White5

ACCESSORIES (ORDER SEPARATELY)FK22 2' × 2' Single Flange Kit

(Shipped separately)CM48Y2SC3F-KIT 48" Cable Mount Kit for 2' wide

Cable Mount fixtures, 3-Wire

–

VOLTAGEU 120V-277V

347 347V11

OPTIONSELL14 Emergency Battery Pack Installed, 1400

Lumens3,4

C388 3-Wire Flex13

C488 4-Wire Flex13

C588 5-Wire Flex13

GLR Fast Blow FuseEOR End of Row (SM and CM only. Provides end

wiring access for continuous row mounting.)INT Intermediate (SM and CM only. Provides

ends with wiring access for continuous row mounting.)

CP Chicago Plenum

CONTROL OPTIONSNXS NX, PIR Occupancy Sensor, Dimming Daylight

Harvesting9,10,11

NXSW NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting9,10,11,12

NXWE NX Wireless Enabled9,10,11,12

NXE NX Enabled, Dual SmartPorts9,10,11

NXES NX Enabled, PIR Occupancy Sensor, Dimming Daylight Harvesting9,10,11

ODP Occupancy and Daylight Sensors, Philips3,5,9

LV Lutron Vive Attached fixture control (RF only for 0-10V drivers)6,7,8,9

1 For drywall, order G with Flange Kit Accessory.2 Order hanger accessories separately.3 Not available in 347V4 For compatibility with Dual-Lite LiteGear® inverters, contact Hubbell Lighting Representative.5 Only available with 0-10V Dimming (ED) Driver Option. See pages 6-8 for more information.6 Not available with ESD, LUTH or LUT5.7 VIVE is a trademark of Lutron Electronics Co., Inc.8 Installations controlled solely by the Lutron Pico controller require accessing the LV (Lutron FCJS) module

for commissioning after the circuit has been energized.

DRIVER AVAILABILITY TABLEVW MW LW ML HL VL

E X X X X X XED X X X X X X

ED1 X X X X X XESD X X X

LUT5 X X X XLUTH X X X X

NX In-Fixture Control Options:9 NX controls can only be used with NX Sensor options.10 NX is available with ED and ED1 drivers only.11 NX combined with Spectrasync is not available in 347V.12 NXSW, NXWE, NXE and NXES cannot be used with surface mount versions.13 For NX control and Flex Wire together, consult factory14 NX control function not available with VL lumen output.

For questions about configuration options, contact Hubbell Representative.

Page 2/10 Rev. 04/05/18



LED / TCAT22

ANCHOR



Product Availability

Lumen Package Lumens Input Watts LPW

TCAT22-30VWG 1417 12 118.1

TCAT22-35VWG 1460 12 121.7

TCAT22-40VWG 1483 12 123.6

TCAT22-50VWG 1517 12 126.4

TCAT22-30MWG 2075 18 115.3

TCAT22-35MWG 2138 18 118.8

TCAT22-40MWG 2177 18 120.9

TCAT22-50MWG 2364 18 131.3

TCAT22-30LWG 2530 22 115.0

TCAT22-35LWG 2606 22 118.5

TCAT22-40LWG 2646 22 120.3

TCAT22-50LWG 2882 22 131.0

TCAT22-30MLG 3375 31 108.9

TCAT22-35MLG 3476 31 112.1

TCAT22-40MLG 3530 31 113.9

TCAT22-50MLG 3844 31 124.0

TCAT22-30HLG 3558 30 118.6

TCAT22-35HLG 3665 30 122.2

TCAT22-40HLG 3722 30 124.1

TCAT22-50HLG 4053 30 135.1

TCAT22-30VLG 4315 37 116.6

TCAT22-35VLG 4445 37 120.1

TCAT22-40VLG 4514 37 122.0

TCAT22-50VLG 4620 37 124.9

Page 3/10 Rev. 04/05/18



LED / TCAT22

ANCHOR



ZONAL LUMEN SUMMARYZone Lumens % Lamp % Fixt.0-30 760 29.2 29.2

0-40 1232 47.3 47.3

0-60 2110 80.9 80.9

0-90 2606 100.0 100.0

0-180 2606 100.0 100.0

PHOTOMETRIC DATA

ENERGY DATATotal Luminaire Efficiency 100.0%

Total Lumens per Watt 121ANSI/IESNA RP-1-2004 Compliance YES-VDT

NORMAL USEComparative Yearly Lighting Energy Cost per 1000 Lumens

$2.03 based on 3000 hrs. and $0.08 per KWH

Test #16556 Test Date 8/8/2016

LUMINAIRE DATALuminaire TCAT22-35LWx-EDU

TCAT LED Troffer, Recessed Architectural2x2 LED with Acrylic Refractor

Ballast XI020C056V054BST1Ballast Factor 1.00Lamp LEDFixture Lumens 2606Watts 21.60Mounting RecessedShielding Angle 0º = 90 90º = 90Spacing Criterion 0º = 1.17 90º = 1.26Luminous Opening in Feet

Length: 1.92Width: 1.92Height: 0.00

INDOOR CANDELA PLOT


0-40 1728 47.1 47.1

0-60 2962 80.8 80.8

0-90 3665 100.0 100.0

0-180 3665 100.0 100.0


Total Lumens per Watt 123ANSI/IESNA RP-1-2004 Compliance: Non-CompliantComparative Yearly Lighting Energy Cost per 1000 Lumens


Test #16579 Test Date 8/10/2016

LUMINAIRE DATALuminaire TCAT22-35HLx-EDU





0-40 1642 47.2 47.2

0-60 2812 80.9 80.9

0-90 3476 100.0 100.0

0-180 3476 100.0 100.0


Total Lumens per Watt 113ANSI/IESNA RP-1-2004 Compliance Non-CompliantComparative Yearly Lighting Energy Cost per 1000 Lumens


Test #16573 Test Date 8/5/2016

LUMINAIRE DATALuminaire TCAT22-35MLx-EDU




INDOOR CANDELA PLOT

INDOOR CANDELA PLOT

Horiz 0-180

500

1000

0 15 30 45

90

75

60

0.0 45.0 90.0

Horiz 0-180

700

1400

0 15 30 45

90

75

60

0.0 45.0 90.0

Horiz 0-180

700

1400

0 15 30 45

90

75

60

0.0 45.0 90.0

Page 4/10 Rev. 04/05/18



LED / TCAT22

ANCHOR



DIMENSIONAL DATA — GRID

DIMENSIONAL DATA — SURFACE MOUNT & CABLE MOUNT

NOTE: All dimensions are in inches; dimensions and specifications are subject to change without notice. Please consult factory or check sample for verification.

Surface Mount:Order SM ceiling type. Mounting

collar required for surface mounting. (4)

Mounting knock-outs, 3⁄8",

provided in center channel as

indicated at left, marked A.

Cable Mount:Order CM ceiling type.

Use CM48Y2SC3F-KIT 48" Cable Mount

Kit for 2' wide CM fixtures. Mounting

holes are provided in diagonal straps

shown at left, marked B.

* For Cable Mount a 2" x 3" access plate with (4) 7⁄8" KOs provided in place of Mounting Collar shown.

CEILING COMPATIBILITY

For lay-in installation in exposed grid ceilings. Maximum tee widths of 1" and maximum tee heights of 2" allowed.

FKCR

Flange kit cut out dimension for single unit only: 243/8" × 243/8"

For flanged fixtures in row configurations, the FKCR adapter bracket kit is re-quired in addition to the FK22 kit. Order one less FKCR than the total number of fixtures in row. (Example: Row of two, order (2) FK22 & (1) FKCR)

Row cut out dimensions using FK22s & FKCR adapters: Width 243/8", Length [24" × (# in row)] + 3/8". Example: (24" × 2) + 3/8" = 483/8"

For hard ceiling applications, order FK22 flange kit. Flange kit wires directly into concealed ceiling opening for a clean, finished appearance.

Type G

Side End

FK22 Flange Kit

Side End

Back of Housing, Grid Recessed Section, Grid

4"

23 3/4"

23 3/4"

23 3/4"

233/4"

233/4"

4"

23 3/4"

23 3/4"

23 3/4"

4"

233/4"

Back of Housing, Surface Mount (SM) and Cable Mount (CM)

Surface Section (SM)

8 1/2"

A

A

A

A

12 1/2"

B

BB

B

25"

1 1/2"

3 1/2"

20" 2 13/32"

4 5/8"

25"

8 1/2"

A

A

A

A

12 1/2"

B

BB

B

25"

1 1/2"

3 1/2"

20" 2 13/32"

4 5/8"

25"25"

45⁄8"

81/2"

20"

31/2"

11/2"

213⁄32"

121/2"

25"

BB

BB

AA

AA

Page 5/10 Rev. 04/05/18



LED / TCAT22

ANCHOR



SPECTRASYNC™ COLOR TUNING TECHNOLOGY

SPECTRASYNC TUNABLE WHITE2750T OR 2765T- SPECTRASYNC LINEAR TUNABLE WHITE, 2700K-5000K OR 2700K-6500KRequires (2) 0-10V controllers, (1) for intensity and (1) for CCT. Minimum 5% dimming.

CONTROLLER MANUFACTURER DATASuggested controllers to be used with SpectraSync:SpectraSync tunable white was designed to be used with sinking style dimmers (provided by others) and is compatible with:• Hubbell Control Solutions (HCS): NX Distributed Intelligence Room Controllers (NXRC) and In-fixture Controllers (NXFM)• Lutron: DVTV, DVSTV, and NFTV dimmers• Wattstopper: ADF120277 and CD4BL (Titan) dimmers

Dim to WarmDim to Warm mimics the familiar warming effect that occurs with traditional incandescent sources as they are dimmed. (Available with 2200K-3000K)

Tunable WhiteTunable White offers users the ability to tailor CCT to their personal preference, enhancing task visibility, material and colors, or the aesthetics of the space. (Available with 2700K-5000K or 2700K-6500K)

Scheduled WhiteScheduled White creates an environment that mimics the rhythms of natural light throughout the day, enhancing occupant's mood and well-being. (Available with 2700K-5000K or 2700K-6500K)

SpectraSync tunable white luminaires are provided with (2) 0-10V circuits. The violet and grey circuit is for wiring to any qualified 0-10V controller for dimming. The violet/white and grey/white circuit is for wiring to any qualified 0-10V controller for tunable white CCT control.

Control your space based on the needs of the application, specific activities throughout the day and preferences of the occupants with distinct SpectraSync Color Tuning Technologies.

To enable scheduling and for use with NX wall control preset stations please refer to Hubbell Control Solutions NX SpectraSync technical sheet.

100%

Channel 1

Channel 2

Control Input (Vdc)

Out

put (

% o

f tot

al d

river

cur

rent

)

Color Tuning Pro�le

90%

80%

70%

60%

50%

40%

30%

20%

10%

0%0 1 2 3 4 5 6 7 8 9 10

Black (HOT)White (NEUTRAL)Green (GROUND)

Violet (DIMMING +)Grey (DIMMING -)

Violet/White (WHITE TUNE +)Grey/White (WHITE TUNE -)

Page 6/10 Rev. 04/05/18



LED / TCAT22

ANCHOR



Lumen Output Watts

2700 3000 3500 4000 5000 6500

Lumens LPW Lumens LPW Lumens LPW Lumens LPW Lumens LPW Lumens LPW

VW 12 1356 113 1417 118 1443 120 1461 122 1509 126 1486 124

MW 18 1986 110 2075 115 2112 117 2139 119 2210 123 2177 121

LW 22 2421 110 2530 115 2576 117 2608 119 2694 122 2654 121

ML 31 3230 104 3375 109 3436 111 3480 112 3594 116 3540 114

HL 30 3405 114 3558 119 3622 121 3668 122 3789 126 3732 124

VL 37 4129 112 4315 117 4393 119 4449 120 4595 124 4526 122

Page 7/10 Rev. 04/05/18



LED / TCAT22

ANCHOR



Main Power Main Power

Main Power

Fixture Fixture Fixture

NXSW-CCTNXSW-SS

NXSW-ORLONXHNB

NXRC-2RD

NX HubbNETNetwork

NXAC-120

LARGE AREASOLUTION

NXOS-DT



CAT5

NX HubbNET™

0-10V

Line-Voltage Wiring

LEGEND

TYPICAL NX DISTRIBUTED INTELLIGENCE™ LAYOUT FOR STAND-ALONE OR NETWORKED ROOM CONTROL

NX™ SOLUTION GUIDE FOR SPECTRASYNC™ COLOR TUNING TECHNOLOGY

NX™ Distributed Intelligence Accesories for SpectraSync Control

CATALOG NUMBER DESCRIPTOR

NXAC-120 NX Area Controller, NEMA 1, HubbNET, BACnet™, 120 Volt

NXHNB NX Network Bridge Module

NXRC-2RD-UNV NX Room Controller, 2 Relay, 0-10V Dimming, Universal Voltage

NXSW-CCT-xx NX Digital CCT Scene Switch, 6 Buttons, 4 Presets, Raise/Lower

NXSW-SS-xx NX Digital Scene Switch, 6 Buttons, 4 Presets, Raise/Lower

NXSW-ORLO-xx NX Digital Switch Station, On/Raise/Lower/Off

NXSW-RL-xx NX Digital Switch Station, 2 Buttons, Raise/Lower

NXSW-OO-xx NX Digital Switch Station, On/Off

NXSW-TO-xx NX Digital Switch Station, Timed-On, Pilot

Order as separate catalog number. Visit www.hubbellcontrolsolutions.com Note: 'xx' = color; Black (BK), Gray (GY), Ivory (IV), Light Almond (LA), Red (RD), White (blank).

When paired with SpectraSync™ enabled luminaires, NX Distributed Intelligence lighting control delivers a comprehensive color control solution, simplifying setup and code compliance through self-configuration and an optional Bluetooth® interface with mobile application.

• Complete control solutions using SpectraSync color tuning technology• Device auto-configuration and plug-n-play connectivity• Intuitive app interface and user-friendly wall stations

NX USER INTERFACESNX mobile app offers user-friendly configuration tool

Wall stations for personalized control of light and color

Free Bluetooth® enabled mobile app for ease ofconfiguration

Android Apple

Area Controller GUI provides simple and intuitive programming

™

Page 8/10 Rev. 04/05/18



LED / TCAT22

ANCHOR



NX DISTRIBUTED INTELLIGENCE™ IN-FIXTURE SOLUTION GUIDENX Distributed Intelligence enables Hubbell's portfolio of commercial, industrial and architectural luminaires to further reduce energy consumption and total cost of ownership for simple to complex control environments.

NX-enabled luminaires provides you the breadth and flexibility to address all your project requirements today and in the future. For a complete list of luminaires with integrated NX options please visit our website.

NX Distributed Intelligence™ In-Fixture Options

NX CONTROL OPTIONS DESCRIPTOR CONNECTIVITY APPLICATION SPACE

NXSP14F NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, 14' Standalone Both

NXSPL NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, Low Mount Standalone Indoor

NXOS NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, OMNI Standalone Indoor

NXS NX, PIR Occupancy Sensor, Dimming Daylight Harvesting Standalone Indoor

NXSPH NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, High Mount Standalone Indoor

NXSP30F NX, PIR Occupancy Sensor, Dimming Daylight Harvesting, 30' Standalone Outdoor

NXESPL NX Enabled, PIR Occupancy Sensor, Dimming Daylight Harvesting, Low Mount Wired Indoor

NXE NX Enabled, Dual SmartPorts Wired Indoor

NXEOS NX Enabled, PIR Occupancy Sensor, Dimming Daylight Harvesting, OMNI Wired Indoor

NXES NX Enabled, PIR Occupancy Sensor, Dimming Daylight Harvesting WIred Indoor

NXESPH NX Enabled, PIR Occupancy Sensor, Dimming Daylight Harvesting, High Mount Wired Indoor

NXSPW14F NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, 14' Wireless Both

NXWE NX Wireless Enabled Wireless Both

NXSPWL NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, Low Mount Wireless Indoor

NXOSW NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, OMNI Wireless Indoor

NXSPWH NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, High Mount Wireless Indoor

NXSW NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting Wireless Indoor

NXSPW30F NX Wireless, PIR Occupancy Sensor, Dimming Daylight Harvesting, 30' Wireless Outdoor

Visit www.hubbellcontrolsolutions.com for additional information on the NX platform. For information on NX options available with specific Hubbell Lighting luminaires please reference specification sheets.

NX USER INTERFACESNX mobile app offers user-friendly configuration tool

Wall stations for personalized control of light and color

Free Bluetooth® enabled mobile app for ease ofconfiguration

Android Apple

Area Controller GUI provides simple and intuitive programming

NX Distributed Intelligence™ Accessories

CATALOG NO. DESCRIPTOR

NXAC-120 NX Area Controller, NEMA 1, HubbNET, BACnet, 120 Volt

NXHNB NX Network Bridge Module

NXRC-2RD-UNV NX Room Controller, 2 Relay, 0 - 10V Dimming, Power Monitoring, Universal Voltage

NXOFM-1R1D-UNV On-fixture Module (7-pin), On / Off / Dim, Daylight Sensor with HubbNET Radio and Bluetooth® Radio, 120-480VAC

NXSW-CCT-xx NX Digital CCT Scene Switch, 6 Buttons, 4 Presets, Raise/Lower

NXSW-SS-xx NX Digital Scene Switch, 6 Buttons, 4 Presets, Raise/Lower

NXSW-ORLO-xx NX Digital Switch Station, On/Raise/Lower/Off

NXSW-RL-xx NX Digital Switch Station, 2 Buttons, Raise/Lower

NXSW-OO-xx NX Digital Switch Station, On/Off

NXSW-TO-xx NX Digital Switch Station, Timed-On, Pilot

Note: 'xx' = color; Black (BK), Gray (GY), Ivory (IV), Light Almond (LA), Red (RD), White (blank).

™

Page 9/10 Rev. 04/05/18



LED / TCAT22

ANCHOR



TYPICAL NX DISTRIBUTED INTELLIGENCE™ LAYOUT FOR WIRELESS OR WIRED NETWORKED IN-FIXTURE CONTROL

LEGEND

LEGEND

Vertical Market: EducationApplication: ClassroomConnectivity: Wired

Vertical Market: EducationApplication: ClassroomConnectivity: Wireless

For additional solutions possible with NX please visit www.hubbellcontrolsolutions.comto view our Vertical Market Application Guides.

™

Page 10/10 Rev. 04/05/18



LED / TCAT22



Documents

TCAT22 Specification Sheet - · PDF fileIC RATING IC label is standard ... TCAT22-50MLG 3844 31 124.0 TCAT22-30HLG 3558 30 118.6 ... PHOTOMETRIC DATA ENERGY DATA Total Luminaire Efficiency