TC1602A-15T

VER. V00 2010-03-10 WWW.TINSHARP.COM

Adjusting Display Contrast：

VDD V0 VSS

VR 20～50K

VLCD

VDD

VSS

Note：Adjust V0 to VSS as an initial setting. When the module is operational, readjust V0 for optimal display appearance.

Electrical Characteristic： ( VSS=0V, Ta = 25℃)

Parameter Symbol Condition MIN TYP MAX Unit

Supply voltage for logic VDD -- 4.8 5.0 5.2 V

Supply current for logic IDD -- -- 1.5 -- mA

-10℃ -- -- -- V

+25℃ -- 5.0 -- V Operating voltage for LCD VLCD

+60℃ -- -- -- V

Supply voltage for Backlight VBL -- -- 5.0 -- V

Supply current for Backlight IBL -- -- 160 -- mA

Interface Pin Connections：

Pin No. Symbol Level Description

1 VSS 0V Ground.

2 VDD +5.0V Supply voltage for logic operating.

3 V0 -- Adjusting voltage for LCD driving (variable).

4 RS H/L

A signal for selecting registers: 1: Data Register (for read and write) 0: Instruction Register (for write), Busy flag-Address Counter (for read).

5 R/W H/L R/W = “H”: Read mode. R/W = “L”: Write mode.

6 E H/L An enable signal for writing or reading data.

7~14 DB0~DB7 H/L 8-bit bi-directional data bus.

15 LED+ +5.0V Power supply for Backlight

16 LED- 0V The backlight ground

Outline Dimension

Absolute Maximum Rating：

Standard value Item Symbol MIN TYP MAX

Unit

Power supply for logic VDD-VSS -0.3 -- 7.0 V

Input voltage VI -0.3 -- VDD+0.3 V

Feature： 1、16X2 Characters 2、STN/TRANSFLECTIVE/POSITIVE/Y-G 3、Yellow-green/bottom-light（LED） 4、Operating Temp.:-10℃～+60℃ 5、1/16 duty cycle, 1/5 Bias 6、Built-in Controller（SPLC780D1 or equivalent） 7、Viewing angle: 6 o’clock

Character Type